429 lines
14 KiB
Plaintext
429 lines
14 KiB
Plaintext
|
ALCATEL-IND1-ETHERNET-OAM-MIB DEFINITIONS ::= BEGIN
|
||
|
|
|
||
|
|
IMPORTS
|
||
|
|
OBJECT-TYPE, MODULE-IDENTITY,
|
||
|
|
OBJECT-IDENTITY, Integer32,
|
||
|
|
Unsigned32
|
||
|
|
FROM SNMPv2-SMI
|
||
|
|
MacAddress
|
||
|
|
|
||
|
|
FROM SNMPv2-TC
|
||
|
|
OBJECT-GROUP,MODULE-COMPLIANCE
|
||
|
|
FROM SNMPv2-CONF
|
||
|
|
softentIND1EthernetOam FROM ALCATEL-IND1-BASE
|
||
|
|
Dot1agCfmMepId,
|
||
|
|
dot1agCfmMaIndex,
|
||
|
|
Dot1agCfmMepIdOrZero,
|
||
|
|
dot1agCfmMdIndex,
|
||
|
|
dot1agCfmMepIdentifier,
|
||
|
|
dot1agCfmMepEntry FROM IEEE8021-CFM-MIB;
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
alcatelIND1EoamMIB MODULE-IDENTITY
|
||
|
|
LAST-UPDATED "200909080000Z" -- 09/08/2009 00:00GMT
|
||
|
|
ORGANIZATION "Alcatel - Architects Of An Internet World"
|
||
|
|
CONTACT-INFO
|
||
|
|
"Please consult with Customer Service to insure the most appropriate
|
||
|
|
version of this document is used with the products in question:
|
||
|
|
|
||
|
|
Alcatel Internetworking, Incorporated
|
||
|
|
(Division 1, Formerly XYLAN Corporation)
|
||
|
|
26801 West Agoura Road
|
||
|
|
Agoura Hills, CA 91301-5122
|
||
|
|
United States Of America
|
||
|
|
|
||
|
|
Telephone: North America +1 800 995 2696
|
||
|
|
Latin America +1 877 919 9526
|
||
|
|
Europe +31 23 556 0100
|
||
|
|
Asia +65 394 7933
|
||
|
|
All Other +1 818 878 4507
|
||
|
|
|
||
|
|
Electronic Mail: support@ind.alcatel.com
|
||
|
|
World Wide Web: http://www.ind.alcatel.com
|
||
|
|
File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs"
|
||
|
|
|
||
|
|
DESCRIPTION
|
||
|
|
"This module describes an authoritative enterprise-
|
||
|
|
specific Simple Network Management Protocol (SNMP) Management
|
||
|
|
Information Base (MIB):
|
||
|
|
|
||
|
|
For the Birds Of Prey Product Line
|
||
|
|
Ethernet OAM for the Connectivity Fault Management.
|
||
|
|
|
||
|
|
|
||
|
|
The right to make changes in specification and other information
|
||
|
|
contained in this document without prior notice is reserved.
|
||
|
|
|
||
|
|
No liability shall be assumed for any incidental, indirect,
|
||
|
|
special, or consequential damages whatsoever arising from or
|
||
|
|
related to this document or the information contained herein.
|
||
|
|
|
||
|
|
Vendors, end-users, and other interested parties are granted
|
||
|
|
non-exclusive license to use this specification in connection with
|
||
|
|
management of the products for which it is intended to be used.
|
||
|
|
|
||
|
|
Copyright (C) 1995-2002 Alcatel Internetworking, Incorporated
|
||
|
|
ALL RIGHTS RESERVED WORLDWIDE"
|
||
|
|
|
||
|
|
REVISION "200909080000Z"
|
||
|
|
DESCRIPTION
|
||
|
|
"Conectivity Fault Management module for managing IEEE 802.1ag.
|
||
|
|
This CFM MIB extends standard draft 802.1ag 8.1.
|
||
|
|
|
||
|
|
|
||
|
|
The set of objects defined in this MIB, do not duplicate,
|
||
|
|
nor conflict with any MIB object definitions defined in
|
||
|
|
the 802.1ag 7.0 draft MIB."
|
||
|
|
::= { softentIND1EthernetOam 1}
|
||
|
|
|
||
|
|
-- --------------------------------------------------------------
|
||
|
|
--
|
||
|
|
-- Ethernet OAM MIB
|
||
|
|
--
|
||
|
|
|
||
|
|
alcatelIND1CfmMIBObjects OBJECT-IDENTITY
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Branch For Connectivity Fault Management (Ethernet OAM) Objects."
|
||
|
|
::= { alcatelIND1EoamMIB 1 }
|
||
|
|
|
||
|
|
-- -------------------------------------------------------------
|
||
|
|
-- groups in the Ethernet OAM MIB
|
||
|
|
-- -------------------------------------------------------------
|
||
|
|
|
||
|
|
alaCfmBase OBJECT IDENTIFIER ::= { alcatelIND1CfmMIBObjects 1 }
|
||
|
|
alaCfmMep OBJECT IDENTIFIER ::= { alcatelIND1CfmMIBObjects 2 }
|
||
|
|
alaCfmDelayResult OBJECT IDENTIFIER ::= { alcatelIND1CfmMIBObjects 3 }
|
||
|
|
-- -------------------------------------------------------------
|
||
|
|
|
||
|
|
|
||
|
|
alaCfmGlobalClearStats OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
default(0),
|
||
|
|
reset(1)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Defines the global clear statistics control for Ethernet OAM.
|
||
|
|
The value reset (1) indicates that Ethernet OAM should clear all
|
||
|
|
statistic counters related to all MEPs in the system.
|
||
|
|
By default, this object contains a zero value."
|
||
|
|
DEFVAL { default }
|
||
|
|
::= { alaCfmBase 1 }
|
||
|
|
|
||
|
|
alaCfmGlobalOWDClear OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
default(0),
|
||
|
|
reset(1)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Defines the global clear of one-way-delay entries control for
|
||
|
|
Ethernet OAM. The value reset (1) indicates that Ethernet OAM
|
||
|
|
should remove all the one-way-delay entries in the delay result
|
||
|
|
table. By default, this object contains a zero value."
|
||
|
|
DEFVAL { default }
|
||
|
|
::= { alaCfmBase 2 }
|
||
|
|
|
||
|
|
alaCfmGlobalTWDClear OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
default(0),
|
||
|
|
reset(1)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Defines the global clear of two-way-delay entries control for
|
||
|
|
Ethernet OAM. The value reset (1) indicates that Ethernet OAM
|
||
|
|
should remove all the two-way-delay entries in the delay result
|
||
|
|
table. By default, this object contains a zero value."
|
||
|
|
DEFVAL { default }
|
||
|
|
::= { alaCfmBase 3 }
|
||
|
|
|
||
|
|
--
|
||
|
|
-- Augmentation of the dot1agCfmMepTable
|
||
|
|
-- Use of AUGMENTS clause implies a one-to-one dependent relationship
|
||
|
|
-- between the base table, dot1agCfmMepTable, and the augmenting table,
|
||
|
|
-- alaCfmMepTable. This in effect extends the dot1agCfmMepTable with an
|
||
|
|
-- additional column to clear statistics. Creation (or deletion) of a row in
|
||
|
|
-- the dot1agCfmMepTable results in the same fate for the row in the
|
||
|
|
-- alaCfmMepTable.
|
||
|
|
|
||
|
|
alaCfmMepTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF AlaCfmMepEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This table augments the MEP table for clearing statistics based
|
||
|
|
on MdIndex/MaIndex/MEPId. This table also contains the objects for
|
||
|
|
initiating 1DM and DMM."
|
||
|
|
::= { alaCfmMep 1 }
|
||
|
|
|
||
|
|
alaCfmMepEntry OBJECT-TYPE
|
||
|
|
SYNTAX AlaCfmMepEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Each row entry in the alaCfmMepTable represents additional
|
||
|
|
column for proprietary extension to the existing MEP table.
|
||
|
|
It provides the facility to clear the statistics based on
|
||
|
|
uniquely identified MEP. It also provides the facility to
|
||
|
|
intiate 1DM and DMM"
|
||
|
|
AUGMENTS { dot1agCfmMepEntry }
|
||
|
|
::= { alaCfmMepTable 1 }
|
||
|
|
|
||
|
|
AlaCfmMepEntry ::=
|
||
|
|
SEQUENCE {
|
||
|
|
alaCfmMepClearStats INTEGER,
|
||
|
|
alaCfmMepOWDTMacAddress MacAddress,
|
||
|
|
alaCfmMepOWDTRMepIdentifier Dot1agCfmMepId,
|
||
|
|
alaCfmMepOWDTPriority Unsigned32,
|
||
|
|
alaCfmMepTWDTMacAddress MacAddress,
|
||
|
|
alaCfmMepTWDTRMepIdentifier Dot1agCfmMepId,
|
||
|
|
alaCfmMepTWDTPriority Unsigned32
|
||
|
|
}
|
||
|
|
|
||
|
|
alaCfmMepClearStats OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
default(0),
|
||
|
|
reset(1)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Reset all statistics parameters corresponding to this MEP.
|
||
|
|
By default, this objects contains a zero value."
|
||
|
|
DEFVAL { default }
|
||
|
|
::= { alaCfmMepEntry 1 }
|
||
|
|
|
||
|
|
alaCfmMepOWDTMacAddress OBJECT-TYPE
|
||
|
|
SYNTAX MacAddress
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Specifies the MAC address used as a target for the
|
||
|
|
One-Way-Delay Test (OWDT).
|
||
|
|
|
||
|
|
Setting this object will trigger a One-Way-Delay test to the specified
|
||
|
|
MAC address. The number of messages transmitted per initiation will
|
||
|
|
be 2.
|
||
|
|
|
||
|
|
Upon completion of the test, the MacAddress will revert to it's
|
||
|
|
default value, indicating that another test is possible."
|
||
|
|
DEFVAL { '000000000000'H }
|
||
|
|
::= { alaCfmMepEntry 2 }
|
||
|
|
|
||
|
|
alaCfmMepOWDTRMepIdentifier OBJECT-TYPE
|
||
|
|
SYNTAX Dot1agCfmMepId
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Specifies the Mep-Id assigned to the Remote MEP."
|
||
|
|
::= { alaCfmMepEntry 3 }
|
||
|
|
|
||
|
|
alaCfmMepOWDTPriority OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32 (0..7)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Specifies the priority used in the generated test frame
|
||
|
|
for the One-Way-Delay test."
|
||
|
|
DEFVAL { 7 }
|
||
|
|
::= { alaCfmMepEntry 4 }
|
||
|
|
|
||
|
|
alaCfmMepTWDTMacAddress OBJECT-TYPE
|
||
|
|
SYNTAX MacAddress
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Specifies the MAC address used as a target for the
|
||
|
|
Two-Way-Delay Test (TWDT).
|
||
|
|
|
||
|
|
Setting this object will trigger a Two-Way-Delay test to the specified
|
||
|
|
MAC address. The number of messages transmitted per initiation will
|
||
|
|
be 2.
|
||
|
|
|
||
|
|
Upon completion of the test, the MacAddress will revert to it's
|
||
|
|
default value, indicating that another test is possible."
|
||
|
|
DEFVAL { '000000000000'H }
|
||
|
|
::= { alaCfmMepEntry 5 }
|
||
|
|
|
||
|
|
alaCfmMepTWDTRMepIdentifier OBJECT-TYPE
|
||
|
|
SYNTAX Dot1agCfmMepId
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Specifies the Mep-Id assigned to the Remote MEP."
|
||
|
|
::= { alaCfmMepEntry 6 }
|
||
|
|
|
||
|
|
alaCfmMepTWDTPriority OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32 (0..7)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Specifies the priority used in the generated test
|
||
|
|
frame for the Two-Way-Delay test."
|
||
|
|
DEFVAL { 7 }
|
||
|
|
::= { alaCfmMepEntry 7 }
|
||
|
|
|
||
|
|
--
|
||
|
|
-- MEP Delay Result Table
|
||
|
|
--
|
||
|
|
alaCfmDelayResultTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF AlaCfmDelayResultEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the results of all the One-Way/Two-Way Delay Tests
|
||
|
|
from the originating MAC addresses.
|
||
|
|
|
||
|
|
This table is not persistent over reboots of the chassis."
|
||
|
|
::= { alaCfmDelayResult 1 }
|
||
|
|
|
||
|
|
alaCfmDelayResultEntry OBJECT-TYPE
|
||
|
|
SYNTAX AlaCfmDelayResultEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The MEP delay result table."
|
||
|
|
INDEX {
|
||
|
|
dot1agCfmMdIndex,
|
||
|
|
dot1agCfmMaIndex,
|
||
|
|
dot1agCfmMepIdentifier,
|
||
|
|
alaCfmDelayResultType,
|
||
|
|
alaCfmDelayResultRMepMacAddress
|
||
|
|
}
|
||
|
|
::= { alaCfmDelayResultTable 1 }
|
||
|
|
|
||
|
|
AlaCfmDelayResultEntry ::= SEQUENCE {
|
||
|
|
alaCfmDelayResultType INTEGER,
|
||
|
|
alaCfmDelayResultRMepMacAddress MacAddress,
|
||
|
|
alaCfmDelayResultRMepIdentifier Dot1agCfmMepIdOrZero,
|
||
|
|
alaCfmDelayResultTestDelay Integer32,
|
||
|
|
alaCfmDelayResultVariation Unsigned32
|
||
|
|
}
|
||
|
|
|
||
|
|
alaCfmDelayResultType OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
oneWayTest (1),
|
||
|
|
twoWayTest (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the type of test this row details."
|
||
|
|
::= { alaCfmDelayResultEntry 1 }
|
||
|
|
|
||
|
|
alaCfmDelayResultRMepMacAddress OBJECT-TYPE
|
||
|
|
SYNTAX MacAddress
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the MAC address of the Remote MEP."
|
||
|
|
::= { alaCfmDelayResultEntry 2 }
|
||
|
|
|
||
|
|
alaCfmDelayResultRMepIdentifier OBJECT-TYPE
|
||
|
|
SYNTAX Dot1agCfmMepIdOrZero
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the Mep-Id of the Remote MEP. Valid only in the case of
|
||
|
|
two-way delay. When initiated for a target Mep-Id contains the
|
||
|
|
Mep-Id of the target, else if two-way delay initiated for a
|
||
|
|
target mac-address contains '0'."
|
||
|
|
::= { alaCfmDelayResultEntry 3 }
|
||
|
|
|
||
|
|
alaCfmDelayResultTestDelay OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
UNITS "microseconds"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the amount of time, measured in microseconds,
|
||
|
|
from when the test-frame was transmitted to the time
|
||
|
|
it was received minus the local processing time
|
||
|
|
taken by the remote system."
|
||
|
|
::= { alaCfmDelayResultEntry 4 }
|
||
|
|
|
||
|
|
alaCfmDelayResultVariation OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
UNITS "microseconds"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the amount of time delay variation, measured
|
||
|
|
in microseconds, from the two most recent time delay measurements"
|
||
|
|
::= { alaCfmDelayResultEntry 5 }
|
||
|
|
|
||
|
|
|
||
|
|
-- --------------------------------------------------------------
|
||
|
|
-- IEEE 802.1ag MIB - Conformance Information
|
||
|
|
-- --------------------------------------------------------------
|
||
|
|
alaCfmConformance OBJECT IDENTIFIER ::= { alcatelIND1EoamMIB 2 }
|
||
|
|
alaCfmGroups OBJECT IDENTIFIER ::= { alaCfmConformance 1 }
|
||
|
|
alaCfmCompliances OBJECT IDENTIFIER ::= { alaCfmConformance 2 }
|
||
|
|
-- --------------------------------------------------------------
|
||
|
|
|
||
|
|
-- --------------------------------------------------------------
|
||
|
|
-- Units of conformance
|
||
|
|
-- --------------------------------------------------------------
|
||
|
|
alaCfmBaseGroup OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
alaCfmGlobalClearStats,
|
||
|
|
alaCfmGlobalOWDClear,
|
||
|
|
alaCfmGlobalTWDClear
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Mandatory objects for the Base group"
|
||
|
|
::= { alaCfmGroups 1 }
|
||
|
|
|
||
|
|
alaCfmMepGroup OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
alaCfmMepClearStats,
|
||
|
|
alaCfmMepOWDTMacAddress,
|
||
|
|
alaCfmMepOWDTRMepIdentifier,
|
||
|
|
alaCfmMepOWDTPriority,
|
||
|
|
alaCfmMepTWDTMacAddress,
|
||
|
|
alaCfmMepTWDTRMepIdentifier,
|
||
|
|
alaCfmMepTWDTPriority
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Mandatory objects for the MEP group. Proprietary extension to
|
||
|
|
support statistics clearing and one-way and two-way delay tests."
|
||
|
|
::= { alaCfmGroups 2 }
|
||
|
|
|
||
|
|
alaCfmDelayResultGroup OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
alaCfmDelayResultRMepIdentifier,
|
||
|
|
alaCfmDelayResultTestDelay,
|
||
|
|
alaCfmDelayResultVariation
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Mandatory objects for the Delay Result Group."
|
||
|
|
::= { alaCfmGroups 3 }
|
||
|
|
|
||
|
|
-- --------------------------------------------------------------
|
||
|
|
-- Compliance statements
|
||
|
|
-- --------------------------------------------------------------
|
||
|
|
alaCfmCompliance MODULE-COMPLIANCE
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The compliance statement for support of CFM."
|
||
|
|
MODULE
|
||
|
|
MANDATORY-GROUPS {
|
||
|
|
alaCfmBaseGroup,
|
||
|
|
alaCfmMepGroup,
|
||
|
|
alaCfmDelayResultGroup
|
||
|
|
}
|
||
|
|
::= { alaCfmCompliances 1 }
|
||
|
|
-- --------------------------------------------------------------
|
||
|
|
|
||
|
|
END
|