12702 lines
411 KiB
Plaintext
12702 lines
411 KiB
Plaintext
|
-- FILE: alcatelIND1QoS.mib
|
||
|
|
|
||
|
|
-- Alcatel
|
||
|
|
-- Architects Of An Internet World
|
||
|
|
|
||
|
|
-- This module provides authoritative enterprise-specific Simple Network
|
||
|
|
-- Management Protocol (SNMP) Management Information Base (MIB) definitions.
|
||
|
|
|
||
|
|
-- The right to make changes in specification and other information contained
|
||
|
|
-- in this document without prior notice is reserved.
|
||
|
|
|
||
|
|
-- No liability shall be assumed for any incidental, indirect, special, or
|
||
|
|
-- consequential damages whatsoever arising from or related to this document or
|
||
|
|
-- the information contained herein.
|
||
|
|
|
||
|
|
-- Vendors, end-users, and other interested parties are granted non-exclusive
|
||
|
|
-- license to use this specification in connection with management of the
|
||
|
|
-- products for which it is intended to be used.
|
||
|
|
|
||
|
|
-- Please consult with Customer Service to ensure the most appropriate version
|
||
|
|
-- of this document is used with the products in question:
|
||
|
|
|
||
|
|
-- Alcatel-Lucent, Enterprise Solutions Division
|
||
|
|
-- (Formerly Alcatel Internetworking, Incorporated)
|
||
|
|
-- 26801 West Agoura Road
|
||
|
|
-- Calabasas, CA 91301
|
||
|
|
-- United States Of America
|
||
|
|
|
||
|
|
-- Telephone: North America 800.995.2696
|
||
|
|
-- Latin America 877.919.9526
|
||
|
|
-- Europe 31.23.556.0100
|
||
|
|
-- Asia 65.394.7933
|
||
|
|
-- All Other 818.878.4507
|
||
|
|
|
||
|
|
-- Electronic Mail: support@ind.alcatel.com
|
||
|
|
-- World Wide Web: http://alcatel-lucent.com/wps/portal/enterprise
|
||
|
|
-- File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs
|
||
|
|
|
||
|
|
-- Copyright (C) 1995-2007 Alcatel-Lucent
|
||
|
|
-- ALL RIGHTS RESERVED WORLDWIDE
|
||
|
|
|
||
|
|
ALCATEL-IND1-QOS-MIB DEFINITIONS ::= BEGIN
|
||
|
|
|
||
|
|
IMPORTS
|
||
|
|
OBJECT-TYPE, OBJECT-IDENTITY, MODULE-IDENTITY,
|
||
|
|
Counter32, Counter64, Integer32, IpAddress
|
||
|
|
FROM SNMPv2-SMI
|
||
|
|
OBJECT-GROUP, MODULE-COMPLIANCE
|
||
|
|
FROM SNMPv2-CONF
|
||
|
|
DisplayString, MacAddress, RowStatus
|
||
|
|
FROM SNMPv2-TC
|
||
|
|
softentIND1QoS
|
||
|
|
FROM ALCATEL-IND1-BASE
|
||
|
|
InterfaceIndex
|
||
|
|
FROM IF-MIB
|
||
|
|
Ipv6Address
|
||
|
|
FROM IPV6-TC;
|
||
|
|
|
||
|
|
|
||
|
|
alaQoSMIB MODULE-IDENTITY
|
||
|
|
LAST-UPDATED "200704030000Z"
|
||
|
|
ORGANIZATION "Alcatel IND"
|
||
|
|
CONTACT-INFO
|
||
|
|
"David Morgan
|
||
|
|
E-Mail: David.Morgan@ind.alcatel.com"
|
||
|
|
DESCRIPTION
|
||
|
|
"QoS and Filtering MIB"
|
||
|
|
::= { softentIND1QoS 1 }
|
||
|
|
|
||
|
|
|
||
|
|
alaQoSMIBObjects OBJECT-IDENTITY
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Branch for QoS Managed Objects."
|
||
|
|
::= { alaQoSMIB 1 }
|
||
|
|
|
||
|
|
|
||
|
|
--
|
||
|
|
-- Definition of rule table
|
||
|
|
--
|
||
|
|
|
||
|
|
alaQoSRuleTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF QoSRuleEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Table of QoS Rule definitions"
|
||
|
|
::= { alaQoSMIBObjects 1 }
|
||
|
|
|
||
|
|
alaQoSRuleEntry OBJECT-TYPE
|
||
|
|
SYNTAX QoSRuleEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Definition of QoS Rule"
|
||
|
|
INDEX {
|
||
|
|
alaQoSRuleName
|
||
|
|
}
|
||
|
|
::= { alaQoSRuleTable 1 }
|
||
|
|
|
||
|
|
QoSRuleEntry ::=
|
||
|
|
SEQUENCE
|
||
|
|
{
|
||
|
|
alaQoSRuleName DisplayString,
|
||
|
|
alaQoSRuleEnabled INTEGER,
|
||
|
|
alaQoSRuleSource INTEGER,
|
||
|
|
alaQoSRulePrecedence Integer32,
|
||
|
|
alaQoSRuleCondition DisplayString,
|
||
|
|
alaQoSRuleAction DisplayString,
|
||
|
|
alaQoSRuleReflexive INTEGER,
|
||
|
|
alaQoSRuleSave INTEGER,
|
||
|
|
alaQoSRuleLog INTEGER,
|
||
|
|
alaQoSRuleMatches Counter32,
|
||
|
|
alaQoSRuleEnforced INTEGER,
|
||
|
|
alaQoSRuleActive INTEGER,
|
||
|
|
alaQoSRuleRowStatus RowStatus,
|
||
|
|
alaQoSRuleValidityPeriod DisplayString,
|
||
|
|
alaQoSRuleValidityPeriodStatus INTEGER,
|
||
|
|
alaQoSRuleLogInterval Integer32,
|
||
|
|
alaQoSRuleCountType INTEGER,
|
||
|
|
alaQoSRulePacketCount Counter64,
|
||
|
|
alaQoSRuleByteCount Counter64,
|
||
|
|
alaQoSRuleExcessPacketCount Counter64,
|
||
|
|
alaQoSRuleExcessByteCount Counter64,
|
||
|
|
alaQoSRuleType Integer32,
|
||
|
|
alaQoSRuleTrapEvents INTEGER,
|
||
|
|
alaQoSRuleDefaultList INTEGER,
|
||
|
|
alaQoSRuleGreenCount Counter64,
|
||
|
|
alaQoSRuleYellowCount Counter64,
|
||
|
|
alaQoSRuleRedCount Counter64,
|
||
|
|
alaQoSRuleNonGreenCount Counter64,
|
||
|
|
alaQoSRuleNonRedCount Counter64
|
||
|
|
}
|
||
|
|
|
||
|
|
alaQoSRuleName OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..31))
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Name of rule"
|
||
|
|
::= { alaQoSRuleEntry 1 }
|
||
|
|
|
||
|
|
alaQoSRuleEnabled OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable (1),
|
||
|
|
disable (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Is this rule enabled or not"
|
||
|
|
DEFVAL { enable }
|
||
|
|
::= { alaQoSRuleEntry 2 }
|
||
|
|
|
||
|
|
alaQoSRuleSource OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
ldap (1),
|
||
|
|
cli (2),
|
||
|
|
blt (3),
|
||
|
|
api (4),
|
||
|
|
imp (5)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "What entity created the rule."
|
||
|
|
DEFVAL { cli }
|
||
|
|
::= { alaQoSRuleEntry 3 }
|
||
|
|
|
||
|
|
alaQoSRulePrecedence OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..65535)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Precedence value for rule.
|
||
|
|
Rules are evaluated from higher precedence to lower.
|
||
|
|
If rules have equal precedence, they are evaluated in
|
||
|
|
the order they are received."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { alaQoSRuleEntry 4 }
|
||
|
|
|
||
|
|
alaQoSRuleCondition OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..31))
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Name of the condition to use"
|
||
|
|
::= { alaQoSRuleEntry 5 }
|
||
|
|
|
||
|
|
alaQoSRuleAction OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..31))
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Name of the action to use"
|
||
|
|
::= { alaQoSRuleEntry 6 }
|
||
|
|
|
||
|
|
alaQoSRuleReflexive OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
yes (1),
|
||
|
|
no (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Indicator to tell if the rule is reflexive. Reflexive rules
|
||
|
|
allow specific return connections that would normally be denied."
|
||
|
|
DEFVAL { no }
|
||
|
|
::= { alaQoSRuleEntry 7 }
|
||
|
|
|
||
|
|
alaQoSRuleSave OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
yes (1),
|
||
|
|
no (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Indicator to tell whether to write out the rule during
|
||
|
|
snapshot commands."
|
||
|
|
DEFVAL { yes }
|
||
|
|
::= { alaQoSRuleEntry 8 }
|
||
|
|
|
||
|
|
alaQoSRuleLog OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
yes (1),
|
||
|
|
no (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Indicator to tell whether to log matches to this rule
|
||
|
|
in the QoS log."
|
||
|
|
DEFVAL { no }
|
||
|
|
::= { alaQoSRuleEntry 9 }
|
||
|
|
|
||
|
|
alaQoSRuleMatches OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Number of times this rule has been matched."
|
||
|
|
::= { alaQoSRuleEntry 10 }
|
||
|
|
|
||
|
|
alaQoSRuleEnforced OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
yes (1),
|
||
|
|
no (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Is this rule currenly being enforced on the switch."
|
||
|
|
::= { alaQoSRuleEntry 11 }
|
||
|
|
|
||
|
|
alaQoSRuleActive OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
yes (1),
|
||
|
|
no (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Is this rule enforcable by the switch."
|
||
|
|
::= { alaQoSRuleEntry 12 }
|
||
|
|
|
||
|
|
alaQoSRuleRowStatus OBJECT-TYPE
|
||
|
|
SYNTAX RowStatus
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Used to create/delete rules according to the
|
||
|
|
RowStatus convention"
|
||
|
|
::= { alaQoSRuleEntry 13 }
|
||
|
|
|
||
|
|
alaQoSRuleValidityPeriod OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..31))
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Name of the validity period to use"
|
||
|
|
::= { alaQoSRuleEntry 14 }
|
||
|
|
|
||
|
|
alaQoSRuleValidityPeriodStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether there is a validity period
|
||
|
|
associated with this rule"
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSRuleEntry 15 }
|
||
|
|
|
||
|
|
alaQoSRuleLogInterval OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..3600)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "How often to look for packets matching this rule when logging.
|
||
|
|
When 0 log as many as possible."
|
||
|
|
DEFVAL { 30 }
|
||
|
|
::= { alaQoSRuleEntry 16 }
|
||
|
|
|
||
|
|
alaQoSRuleCountType OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
packets (1),
|
||
|
|
bytes (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Which rule statistics counters to update if not all are available"
|
||
|
|
DEFVAL { packets }
|
||
|
|
::= { alaQoSRuleEntry 17 }
|
||
|
|
|
||
|
|
alaQoSRulePacketCount OBJECT-TYPE
|
||
|
|
SYNTAX Counter64
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Counter for packets patching this rule"
|
||
|
|
::= { alaQoSRuleEntry 18 }
|
||
|
|
|
||
|
|
alaQoSRuleByteCount OBJECT-TYPE
|
||
|
|
SYNTAX Counter64
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Counter for bytes matching this rule"
|
||
|
|
::= { alaQoSRuleEntry 19 }
|
||
|
|
|
||
|
|
alaQoSRuleExcessPacketCount OBJECT-TYPE
|
||
|
|
SYNTAX Counter64
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Counter for packets out of bandwidth parameters"
|
||
|
|
::= { alaQoSRuleEntry 20 }
|
||
|
|
|
||
|
|
alaQoSRuleExcessByteCount OBJECT-TYPE
|
||
|
|
SYNTAX Counter64
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Counter for bytes out of bandwidth parameters"
|
||
|
|
::= { alaQoSRuleEntry 21 }
|
||
|
|
|
||
|
|
alaQoSRuleType OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The type of rule this is. Each bit represents the following:
|
||
|
|
0x1 = bridged
|
||
|
|
0x2 = routed
|
||
|
|
0x4 = multicast"
|
||
|
|
::= { alaQoSRuleEntry 22 }
|
||
|
|
|
||
|
|
alaQoSRuleTrapEvents OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
yes (1),
|
||
|
|
no (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Send SNMP trap when 'qos user-port shutdown' param or
|
||
|
|
rule having action=port-disable is matched/invoked?"
|
||
|
|
DEFVAL { yes }
|
||
|
|
::= { alaQoSRuleEntry 23 }
|
||
|
|
|
||
|
|
alaQoSRuleDefaultList OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
yes (1),
|
||
|
|
no (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "This rule belongs to the default policy list. "
|
||
|
|
DEFVAL { yes }
|
||
|
|
::= { alaQoSRuleEntry 24 }
|
||
|
|
|
||
|
|
alaQoSRuleGreenCount OBJECT-TYPE
|
||
|
|
SYNTAX Counter64
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Counter for the number of packets being green compliant."
|
||
|
|
::= { alaQoSRuleEntry 25 }
|
||
|
|
|
||
|
|
alaQoSRuleYellowCount OBJECT-TYPE
|
||
|
|
SYNTAX Counter64
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Counter for the number of packets being yellow compliant."
|
||
|
|
::= { alaQoSRuleEntry 26 }
|
||
|
|
|
||
|
|
alaQoSRuleRedCount OBJECT-TYPE
|
||
|
|
SYNTAX Counter64
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Counter for the number of packets being red compliant."
|
||
|
|
::= { alaQoSRuleEntry 27 }
|
||
|
|
|
||
|
|
alaQoSRuleNonGreenCount OBJECT-TYPE
|
||
|
|
SYNTAX Counter64
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Counter for the number of packets being non-green compliant."
|
||
|
|
::= { alaQoSRuleEntry 28 }
|
||
|
|
|
||
|
|
alaQoSRuleNonRedCount OBJECT-TYPE
|
||
|
|
SYNTAX Counter64
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Counter for the number of packets being non-red compliant."
|
||
|
|
::= { alaQoSRuleEntry 29 }
|
||
|
|
|
||
|
|
--
|
||
|
|
-- Definition of rule table
|
||
|
|
--
|
||
|
|
|
||
|
|
alaQoSAppliedRuleTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF QoSAppliedRuleEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Table of QoS AppliedRule definitions"
|
||
|
|
::= { alaQoSMIBObjects 2 }
|
||
|
|
|
||
|
|
alaQoSAppliedRuleEntry OBJECT-TYPE
|
||
|
|
SYNTAX QoSAppliedRuleEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Definition of QoS AppliedRule"
|
||
|
|
INDEX {
|
||
|
|
alaQoSAppliedRuleName
|
||
|
|
}
|
||
|
|
::= { alaQoSAppliedRuleTable 1 }
|
||
|
|
|
||
|
|
QoSAppliedRuleEntry ::=
|
||
|
|
SEQUENCE
|
||
|
|
{
|
||
|
|
alaQoSAppliedRuleName DisplayString,
|
||
|
|
alaQoSAppliedRuleEnabled INTEGER,
|
||
|
|
alaQoSAppliedRuleSource INTEGER,
|
||
|
|
alaQoSAppliedRulePrecedence Integer32,
|
||
|
|
alaQoSAppliedRuleCondition DisplayString,
|
||
|
|
alaQoSAppliedRuleAction DisplayString,
|
||
|
|
alaQoSAppliedRuleReflexive INTEGER,
|
||
|
|
alaQoSAppliedRuleSave INTEGER,
|
||
|
|
alaQoSAppliedRuleLog INTEGER,
|
||
|
|
alaQoSAppliedRuleMatches Counter32,
|
||
|
|
alaQoSAppliedRuleEnforced INTEGER,
|
||
|
|
alaQoSAppliedRuleActive INTEGER,
|
||
|
|
alaQoSAppliedRuleRowStatus RowStatus,
|
||
|
|
alaQoSAppliedRuleValidityPeriod DisplayString,
|
||
|
|
alaQoSAppliedRuleValidityPeriodStatus INTEGER,
|
||
|
|
alaQoSAppliedRuleLogInterval Integer32,
|
||
|
|
alaQoSAppliedRuleCountType INTEGER,
|
||
|
|
alaQoSAppliedRulePacketCount Counter64,
|
||
|
|
alaQoSAppliedRuleByteCount Counter64,
|
||
|
|
alaQoSAppliedRuleExcessPacketCount Counter64,
|
||
|
|
alaQoSAppliedRuleExcessByteCount Counter64,
|
||
|
|
alaQoSAppliedRuleType Integer32,
|
||
|
|
alaQoSAppliedRuleTrapEvents INTEGER,
|
||
|
|
alaQoSAppliedRuleDefaultList INTEGER,
|
||
|
|
alaQoSAppliedRuleGreenCount Counter64,
|
||
|
|
alaQoSAppliedRuleYellowCount Counter64,
|
||
|
|
alaQoSAppliedRuleRedCount Counter64,
|
||
|
|
alaQoSAppliedRuleNonGreenCount Counter64,
|
||
|
|
alaQoSAppliedRuleNonRedCount Counter64
|
||
|
|
}
|
||
|
|
|
||
|
|
alaQoSAppliedRuleName OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..31))
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Name of rule"
|
||
|
|
::= { alaQoSAppliedRuleEntry 1 }
|
||
|
|
|
||
|
|
alaQoSAppliedRuleEnabled OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable (1),
|
||
|
|
disable (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Is this rule enabled or not"
|
||
|
|
::= { alaQoSAppliedRuleEntry 2 }
|
||
|
|
|
||
|
|
alaQoSAppliedRuleSource OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
ldap (1),
|
||
|
|
cli (2),
|
||
|
|
blt (3),
|
||
|
|
api (4),
|
||
|
|
imp (5)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "What entity created the rule."
|
||
|
|
::= { alaQoSAppliedRuleEntry 3 }
|
||
|
|
|
||
|
|
alaQoSAppliedRulePrecedence OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..65535)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Precedence value for rule.
|
||
|
|
Rules are evaluated from higher precedence to lower.
|
||
|
|
If rules have equal precedence, they are evaluated in
|
||
|
|
the order they are received."
|
||
|
|
::= { alaQoSAppliedRuleEntry 4 }
|
||
|
|
|
||
|
|
alaQoSAppliedRuleCondition OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..31))
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Name of the condition to use"
|
||
|
|
::= { alaQoSAppliedRuleEntry 5 }
|
||
|
|
|
||
|
|
alaQoSAppliedRuleAction OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..31))
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Name of the action to use"
|
||
|
|
::= { alaQoSAppliedRuleEntry 6 }
|
||
|
|
|
||
|
|
alaQoSAppliedRuleReflexive OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
yes (1),
|
||
|
|
no (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Indicator to tell if the rule is reflexive. Reflexive rules
|
||
|
|
allow specific return connections that would normally be denied."
|
||
|
|
::= { alaQoSAppliedRuleEntry 7 }
|
||
|
|
|
||
|
|
alaQoSAppliedRuleSave OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
yes (1),
|
||
|
|
no (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Indicator to tell whether to write out the rule during
|
||
|
|
snapshot commands."
|
||
|
|
::= { alaQoSAppliedRuleEntry 8 }
|
||
|
|
|
||
|
|
alaQoSAppliedRuleLog OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
yes (1),
|
||
|
|
no (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Indicator to tell whether to log matches to this rule
|
||
|
|
in the QoS log."
|
||
|
|
::= { alaQoSAppliedRuleEntry 9 }
|
||
|
|
|
||
|
|
alaQoSAppliedRuleMatches OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Number of times this rule has been matched."
|
||
|
|
::= { alaQoSAppliedRuleEntry 10 }
|
||
|
|
|
||
|
|
alaQoSAppliedRuleEnforced OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
yes (1),
|
||
|
|
no (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Is this rule currenly being enforced on the switch."
|
||
|
|
::= { alaQoSAppliedRuleEntry 11 }
|
||
|
|
|
||
|
|
alaQoSAppliedRuleActive OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
yes (1),
|
||
|
|
no (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Is this rule enforcable by the switch."
|
||
|
|
::= { alaQoSAppliedRuleEntry 12 }
|
||
|
|
|
||
|
|
alaQoSAppliedRuleRowStatus OBJECT-TYPE
|
||
|
|
SYNTAX RowStatus
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Used to create/delete rules according to the
|
||
|
|
RowStatus convention"
|
||
|
|
::= { alaQoSAppliedRuleEntry 13 }
|
||
|
|
|
||
|
|
alaQoSAppliedRuleValidityPeriod OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..31))
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Name of the validity period to use"
|
||
|
|
::= { alaQoSAppliedRuleEntry 14 }
|
||
|
|
|
||
|
|
alaQoSAppliedRuleValidityPeriodStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether there is a validity period
|
||
|
|
associated with this rule"
|
||
|
|
::= { alaQoSAppliedRuleEntry 15 }
|
||
|
|
|
||
|
|
alaQoSAppliedRuleLogInterval OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..3600)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "How often to look for packets matching this rule when logging.
|
||
|
|
When 0 log as many as possible."
|
||
|
|
::= { alaQoSAppliedRuleEntry 16 }
|
||
|
|
|
||
|
|
alaQoSAppliedRuleCountType OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
packets (1),
|
||
|
|
bytes (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Which rule statistics counters to update if not all are available"
|
||
|
|
::= { alaQoSAppliedRuleEntry 17 }
|
||
|
|
|
||
|
|
alaQoSAppliedRulePacketCount OBJECT-TYPE
|
||
|
|
SYNTAX Counter64
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Counter for packets patching this rule"
|
||
|
|
::= { alaQoSAppliedRuleEntry 18 }
|
||
|
|
|
||
|
|
alaQoSAppliedRuleByteCount OBJECT-TYPE
|
||
|
|
SYNTAX Counter64
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Counter for bytes matching this rule"
|
||
|
|
::= { alaQoSAppliedRuleEntry 19 }
|
||
|
|
|
||
|
|
alaQoSAppliedRuleExcessPacketCount OBJECT-TYPE
|
||
|
|
SYNTAX Counter64
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Counter for packets out of bandwidth parameters"
|
||
|
|
::= { alaQoSAppliedRuleEntry 20 }
|
||
|
|
|
||
|
|
alaQoSAppliedRuleExcessByteCount OBJECT-TYPE
|
||
|
|
SYNTAX Counter64
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Counter for bytes out of bandwidth parameters"
|
||
|
|
::= { alaQoSAppliedRuleEntry 21 }
|
||
|
|
|
||
|
|
alaQoSAppliedRuleType OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The type of rule this is. Each bit represents the following:
|
||
|
|
0x1 = bridged
|
||
|
|
0x2 = routed
|
||
|
|
0x4 = multicast"
|
||
|
|
::= { alaQoSAppliedRuleEntry 22 }
|
||
|
|
|
||
|
|
alaQoSAppliedRuleTrapEvents OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
yes (1),
|
||
|
|
no (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Send SNMP trap when 'qos user-port shutdown' param or
|
||
|
|
rule having action=port-disable is matched/invoked?"
|
||
|
|
DEFVAL { yes }
|
||
|
|
::= { alaQoSAppliedRuleEntry 23 }
|
||
|
|
|
||
|
|
alaQoSAppliedRuleDefaultList OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
yes (1),
|
||
|
|
no (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "This rule belongs to the default policy list. "
|
||
|
|
DEFVAL { yes }
|
||
|
|
::= { alaQoSAppliedRuleEntry 24 }
|
||
|
|
|
||
|
|
alaQoSAppliedRuleGreenCount OBJECT-TYPE
|
||
|
|
SYNTAX Counter64
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Counter for the number of packets being green compliant."
|
||
|
|
::= { alaQoSAppliedRuleEntry 25 }
|
||
|
|
|
||
|
|
alaQoSAppliedRuleYellowCount OBJECT-TYPE
|
||
|
|
SYNTAX Counter64
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Counter for the number of packets being yellow compliant."
|
||
|
|
::= { alaQoSAppliedRuleEntry 26 }
|
||
|
|
|
||
|
|
alaQoSAppliedRuleRedCount OBJECT-TYPE
|
||
|
|
SYNTAX Counter64
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Counter for the number of packets being red compliant."
|
||
|
|
::= { alaQoSAppliedRuleEntry 27 }
|
||
|
|
|
||
|
|
alaQoSAppliedRuleNonGreenCount OBJECT-TYPE
|
||
|
|
SYNTAX Counter64
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Counter for the number of packets being non-green compliant."
|
||
|
|
::= { alaQoSAppliedRuleEntry 28 }
|
||
|
|
|
||
|
|
alaQoSAppliedRuleNonRedCount OBJECT-TYPE
|
||
|
|
SYNTAX Counter64
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Counter for the number of packets being non-red compliant."
|
||
|
|
::= { alaQoSAppliedRuleEntry 29 }
|
||
|
|
|
||
|
|
--
|
||
|
|
-- Definition of condition table
|
||
|
|
--
|
||
|
|
|
||
|
|
alaQoSConditionTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF QoSConditionEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Table of QoS Condition definitions"
|
||
|
|
::= { alaQoSMIBObjects 3 }
|
||
|
|
|
||
|
|
alaQoSConditionEntry OBJECT-TYPE
|
||
|
|
SYNTAX QoSConditionEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Definition of QoS Condition"
|
||
|
|
INDEX {
|
||
|
|
alaQoSConditionName
|
||
|
|
}
|
||
|
|
::= { alaQoSConditionTable 1 }
|
||
|
|
|
||
|
|
QoSConditionEntry ::=
|
||
|
|
SEQUENCE
|
||
|
|
{
|
||
|
|
alaQoSConditionName DisplayString,
|
||
|
|
alaQoSConditionSource INTEGER,
|
||
|
|
alaQoSConditionSourceSlot Integer32,
|
||
|
|
alaQoSConditionSourceSlotStatus INTEGER,
|
||
|
|
alaQoSConditionSourcePort Integer32,
|
||
|
|
alaQoSConditionSourcePortGroup DisplayString,
|
||
|
|
alaQoSConditionSourcePortGroupStatus INTEGER,
|
||
|
|
alaQoSConditionDestinationSlot Integer32,
|
||
|
|
alaQoSConditionDestinationSlotStatus INTEGER,
|
||
|
|
alaQoSConditionDestinationPort Integer32,
|
||
|
|
alaQoSConditionDestinationPortGroup DisplayString,
|
||
|
|
alaQoSConditionDestinationPortGroupStatus INTEGER,
|
||
|
|
alaQoSConditionSourceInterfaceType INTEGER,
|
||
|
|
alaQoSConditionSourceInterfaceTypeStatus INTEGER,
|
||
|
|
alaQoSConditionDestinationInterfaceType INTEGER,
|
||
|
|
alaQoSConditionDestinationInterfaceTypeStatus INTEGER,
|
||
|
|
alaQoSConditionSourceMacAddr MacAddress,
|
||
|
|
alaQoSConditionSourceMacAddrStatus INTEGER,
|
||
|
|
alaQoSConditionSourceMacMask MacAddress,
|
||
|
|
alaQoSConditionSourceMacGroup DisplayString,
|
||
|
|
alaQoSConditionSourceMacGroupStatus INTEGER,
|
||
|
|
alaQoSConditionDestinationMacAddr MacAddress,
|
||
|
|
alaQoSConditionDestinationMacAddrStatus INTEGER,
|
||
|
|
alaQoSConditionDestinationMacMask MacAddress,
|
||
|
|
alaQoSConditionDestinationMacGroup DisplayString,
|
||
|
|
alaQoSConditionDestinationMacGroupStatus INTEGER,
|
||
|
|
alaQoSConditionSourceVlan Integer32,
|
||
|
|
alaQoSConditionSourceVlanStatus INTEGER,
|
||
|
|
alaQoSConditionDestinationVlan Integer32,
|
||
|
|
alaQoSConditionDestinationVlanStatus INTEGER,
|
||
|
|
alaQoSCondition8021p Integer32,
|
||
|
|
alaQoSCondition8021pStatus INTEGER,
|
||
|
|
alaQoSConditionSourceIpAddr IpAddress,
|
||
|
|
alaQoSConditionSourceIpAddrStatus INTEGER,
|
||
|
|
alaQoSConditionSourceIpMask IpAddress,
|
||
|
|
alaQoSConditionSourceNetworkGroup DisplayString,
|
||
|
|
alaQoSConditionSourceNetworkGroupStatus INTEGER,
|
||
|
|
alaQoSConditionDestinationIpAddr IpAddress,
|
||
|
|
alaQoSConditionDestinationIpAddrStatus INTEGER,
|
||
|
|
alaQoSConditionDestinationIpMask IpAddress,
|
||
|
|
alaQoSConditionDestinationNetworkGroup DisplayString,
|
||
|
|
alaQoSConditionDestinationNetworkGroupStatus INTEGER,
|
||
|
|
alaQoSConditionMulticastIpAddr IpAddress,
|
||
|
|
alaQoSConditionMulticastIpAddrStatus INTEGER,
|
||
|
|
alaQoSConditionMulticastIpMask IpAddress,
|
||
|
|
alaQoSConditionMulticastNetworkGroup DisplayString,
|
||
|
|
alaQoSConditionMulticastNetworkGroupStatus INTEGER,
|
||
|
|
alaQoSConditionTos Integer32,
|
||
|
|
alaQoSConditionTosStatus INTEGER,
|
||
|
|
alaQoSConditionTosMask Integer32,
|
||
|
|
alaQoSConditionDscp Integer32,
|
||
|
|
alaQoSConditionDscpStatus INTEGER,
|
||
|
|
alaQoSConditionDscpMask Integer32,
|
||
|
|
alaQoSConditionIpProtocol Integer32,
|
||
|
|
alaQoSConditionIpProtocolStatus INTEGER,
|
||
|
|
alaQoSConditionSourceIpPort Integer32,
|
||
|
|
alaQoSConditionSourceIpPortStatus INTEGER,
|
||
|
|
alaQoSConditionDestinationIpPort Integer32,
|
||
|
|
alaQoSConditionDestinationIpPortStatus INTEGER,
|
||
|
|
alaQoSConditionService DisplayString,
|
||
|
|
alaQoSConditionServiceStatus INTEGER,
|
||
|
|
alaQoSConditionServiceGroup DisplayString,
|
||
|
|
alaQoSConditionServiceGroupStatus INTEGER,
|
||
|
|
alaQoSConditionIcmpType Integer32,
|
||
|
|
alaQoSConditionIcmpTypeStatus INTEGER,
|
||
|
|
alaQoSConditionIcmpCode Integer32,
|
||
|
|
alaQoSConditionIcmpCodeStatus INTEGER,
|
||
|
|
alaQoSConditionDlci Integer32,
|
||
|
|
alaQoSConditionDlciStatus INTEGER,
|
||
|
|
alaQoSConditionRowStatus RowStatus,
|
||
|
|
alaQoSConditionSourcePortEnd Integer32,
|
||
|
|
alaQoSConditionDestinationPortEnd Integer32,
|
||
|
|
alaQoSConditionSourceIpPortEnd Integer32,
|
||
|
|
alaQoSConditionDestinationIpPortEnd Integer32,
|
||
|
|
alaQoSConditionSourceTcpPort Integer32,
|
||
|
|
alaQoSConditionSourceTcpPortStatus INTEGER,
|
||
|
|
alaQoSConditionSourceTcpPortEnd Integer32,
|
||
|
|
alaQoSConditionDestinationTcpPort Integer32,
|
||
|
|
alaQoSConditionDestinationTcpPortStatus INTEGER,
|
||
|
|
alaQoSConditionDestinationTcpPortEnd Integer32,
|
||
|
|
alaQoSConditionSourceUdpPort Integer32,
|
||
|
|
alaQoSConditionSourceUdpPortStatus INTEGER,
|
||
|
|
alaQoSConditionSourceUdpPortEnd Integer32,
|
||
|
|
alaQoSConditionDestinationUdpPort Integer32,
|
||
|
|
alaQoSConditionDestinationUdpPortStatus INTEGER,
|
||
|
|
alaQoSConditionDestinationUdpPortEnd Integer32,
|
||
|
|
alaQoSConditionEthertype Integer32,
|
||
|
|
alaQoSConditionEthertypeStatus INTEGER,
|
||
|
|
alaQoSConditionTcpFlags INTEGER,
|
||
|
|
alaQoSConditionTcpFlagsStatus INTEGER,
|
||
|
|
alaQoSConditionTcpFlagsVal Integer32,
|
||
|
|
alaQoSConditionTcpFlagsValStatus INTEGER,
|
||
|
|
alaQoSConditionTcpFlagsMask Integer32,
|
||
|
|
alaQoSConditionTcpFlagsMaskStatus INTEGER,
|
||
|
|
alaQoSConditionTcpEstablished INTEGER,
|
||
|
|
alaQoSConditionSourceIpv6Addr Ipv6Address,
|
||
|
|
alaQoSConditionSourceIpv6AddrStatus INTEGER,
|
||
|
|
alaQoSConditionSourceIpv6Mask Ipv6Address,
|
||
|
|
alaQoSConditionDestinationIpv6Addr Ipv6Address,
|
||
|
|
alaQoSConditionDestinationIpv6AddrStatus INTEGER,
|
||
|
|
alaQoSConditionDestinationIpv6Mask Ipv6Address,
|
||
|
|
alaQoSConditionIpv6Traffic INTEGER,
|
||
|
|
alaQoSConditionIpv6NH Integer32,
|
||
|
|
alaQoSConditionIpv6NHStatus INTEGER,
|
||
|
|
alaQoSConditionIpv6FlowLabel Integer32,
|
||
|
|
alaQoSConditionIpv6FlowLabelStatus INTEGER,
|
||
|
|
alaQoSConditionMcastIpv6Addr Ipv6Address,
|
||
|
|
alaQoSConditionMcastIpv6AddrStatus INTEGER,
|
||
|
|
alaQoSConditionMcastIpv6Mask Ipv6Address,
|
||
|
|
alaQoSConditionDscpEnd Integer32,
|
||
|
|
alaQoSConditionInnerSourceVlan Integer32,
|
||
|
|
alaQoSConditionInnerSourceVlanStatus INTEGER,
|
||
|
|
alaQoSConditionInner8021p Integer32,
|
||
|
|
alaQoSConditionInner8021pStatus INTEGER,
|
||
|
|
alaQoSConditionVrfName DisplayString,
|
||
|
|
alaQoSConditionVrfNameStatus INTEGER,
|
||
|
|
alaQoSCondition8021pEnd Integer32,
|
||
|
|
alaQoSConditionInner8021pEnd Integer32,
|
||
|
|
alaQoSConditionSourceVlanGroup DisplayString,
|
||
|
|
alaQoSConditionSourceVlanGroupStatus INTEGER,
|
||
|
|
alaQoSConditionInnerSourceVlanGroup DisplayString,
|
||
|
|
alaQoSConditionInnerSourceVlanGroupStatus INTEGER
|
||
|
|
}
|
||
|
|
|
||
|
|
alaQoSConditionName OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..31))
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Name of condition"
|
||
|
|
::= { alaQoSConditionEntry 1 }
|
||
|
|
|
||
|
|
alaQoSConditionSource OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
ldap (1),
|
||
|
|
cli (2),
|
||
|
|
blt (3),
|
||
|
|
api (4),
|
||
|
|
imp (5)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "What entity created the condition."
|
||
|
|
DEFVAL { cli }
|
||
|
|
::= { alaQoSConditionEntry 2 }
|
||
|
|
|
||
|
|
alaQoSConditionSourceSlot OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..16)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Source physical slot used for traffic classification
|
||
|
|
When 0, the port identifies an aggregate"
|
||
|
|
DEFVAL { 1 }
|
||
|
|
::= { alaQoSConditionEntry 3 }
|
||
|
|
|
||
|
|
alaQoSConditionSourceSlotStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the source physical slot and
|
||
|
|
port range needs to be matched(enabled) or not(disabled)."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSConditionEntry 4 }
|
||
|
|
|
||
|
|
alaQoSConditionSourcePort OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..52)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Source physical port range start to use for
|
||
|
|
traffic classification"
|
||
|
|
DEFVAL { 1 }
|
||
|
|
::= { alaQoSConditionEntry 5 }
|
||
|
|
|
||
|
|
alaQoSConditionSourcePortGroup OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..31))
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Source physical port group to use for traffic classification"
|
||
|
|
::= { alaQoSConditionEntry 6 }
|
||
|
|
|
||
|
|
alaQoSConditionSourcePortGroupStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the source physical port group
|
||
|
|
needs to be matched(enabled) or not(disabled)."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSConditionEntry 7 }
|
||
|
|
|
||
|
|
alaQoSConditionDestinationSlot OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..16)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Destination physical slot used for traffic classification
|
||
|
|
When 0, the port identifies an aggregate"
|
||
|
|
DEFVAL { 1 }
|
||
|
|
::= { alaQoSConditionEntry 8 }
|
||
|
|
|
||
|
|
alaQoSConditionDestinationSlotStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the destination physical slot
|
||
|
|
and port range needs to be matched(enabled) or not(disabled)."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSConditionEntry 9 }
|
||
|
|
|
||
|
|
alaQoSConditionDestinationPort OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..52)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Destination physical port range start to use for traffic
|
||
|
|
classification"
|
||
|
|
DEFVAL { 1 }
|
||
|
|
::= { alaQoSConditionEntry 10 }
|
||
|
|
|
||
|
|
alaQoSConditionDestinationPortGroup OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..31))
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Destination physical port group to use for traffic
|
||
|
|
classification"
|
||
|
|
::= { alaQoSConditionEntry 11 }
|
||
|
|
|
||
|
|
alaQoSConditionDestinationPortGroupStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the destination physical port
|
||
|
|
group needs to be matched(enabled) or not(disabled)."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSConditionEntry 12 }
|
||
|
|
|
||
|
|
alaQoSConditionSourceInterfaceType OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
ethernet (1),
|
||
|
|
wan (2),
|
||
|
|
ethernet10 (3),
|
||
|
|
ethernet100 (4),
|
||
|
|
ethernet1G (5),
|
||
|
|
ethernet10G (6),
|
||
|
|
aggregate (7)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Source physical interface type to use for traffic
|
||
|
|
classification"
|
||
|
|
DEFVAL { ethernet }
|
||
|
|
::= { alaQoSConditionEntry 13 }
|
||
|
|
|
||
|
|
alaQoSConditionSourceInterfaceTypeStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the source physical
|
||
|
|
interface type needs to be matched(enabled) or not(disabled)."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSConditionEntry 14 }
|
||
|
|
|
||
|
|
alaQoSConditionDestinationInterfaceType OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
ethernet (1),
|
||
|
|
wan (2),
|
||
|
|
ethernet10 (3),
|
||
|
|
ethernet100 (4),
|
||
|
|
ethernet1G (5),
|
||
|
|
ethernet10G (6),
|
||
|
|
aggregate (7)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Destination physical interface type to use for traffic
|
||
|
|
classification"
|
||
|
|
DEFVAL { ethernet }
|
||
|
|
::= { alaQoSConditionEntry 15 }
|
||
|
|
|
||
|
|
alaQoSConditionDestinationInterfaceTypeStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the destination physical
|
||
|
|
interface type needs to be matched(enabled) or not(disabled)."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSConditionEntry 16 }
|
||
|
|
|
||
|
|
alaQoSConditionSourceMacAddr OBJECT-TYPE
|
||
|
|
SYNTAX MacAddress
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Source MAC address to use for traffic classification"
|
||
|
|
DEFVAL { '000000000000'h }
|
||
|
|
::= { alaQoSConditionEntry 17 }
|
||
|
|
|
||
|
|
alaQoSConditionSourceMacAddrStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the source MAC address & mask
|
||
|
|
needs to be matched(enabled) or not(disabled)."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSConditionEntry 18 }
|
||
|
|
|
||
|
|
alaQoSConditionSourceMacMask OBJECT-TYPE
|
||
|
|
SYNTAX MacAddress
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Source MAC mask to use for traffic classification"
|
||
|
|
DEFVAL { 'ffffffffffff'h }
|
||
|
|
::= { alaQoSConditionEntry 19 }
|
||
|
|
|
||
|
|
alaQoSConditionSourceMacGroup OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..31))
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Source MAC group to use for traffic classification"
|
||
|
|
::= { alaQoSConditionEntry 20 }
|
||
|
|
|
||
|
|
alaQoSConditionSourceMacGroupStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the source MAC group
|
||
|
|
needs to be matched(enabled) or not(disabled)."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSConditionEntry 21 }
|
||
|
|
|
||
|
|
alaQoSConditionDestinationMacAddr OBJECT-TYPE
|
||
|
|
SYNTAX MacAddress
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Destination MAC address to use for traffic classification"
|
||
|
|
DEFVAL { '000000000000'h }
|
||
|
|
::= { alaQoSConditionEntry 22 }
|
||
|
|
|
||
|
|
alaQoSConditionDestinationMacAddrStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the destination MAC address
|
||
|
|
& mask needs to be matched(enabled) or not(disabled)."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSConditionEntry 23 }
|
||
|
|
|
||
|
|
alaQoSConditionDestinationMacMask OBJECT-TYPE
|
||
|
|
SYNTAX MacAddress
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Destination MAC mask to use for traffic classification"
|
||
|
|
DEFVAL { 'ffffffffffff'h }
|
||
|
|
::= { alaQoSConditionEntry 24 }
|
||
|
|
|
||
|
|
alaQoSConditionDestinationMacGroup OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..31))
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Destination MAC group to use for traffic classification"
|
||
|
|
::= { alaQoSConditionEntry 25 }
|
||
|
|
|
||
|
|
alaQoSConditionDestinationMacGroupStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the destination MAC group
|
||
|
|
needs to be matched(enabled) or not(disabled)."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSConditionEntry 26 }
|
||
|
|
|
||
|
|
alaQoSConditionSourceVlan OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..4095)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Source VLAN to use for traffic classification"
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { alaQoSConditionEntry 27 }
|
||
|
|
|
||
|
|
alaQoSConditionSourceVlanStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the source VLAN
|
||
|
|
needs to be matched(enabled) or not(disabled)."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSConditionEntry 28 }
|
||
|
|
|
||
|
|
alaQoSConditionDestinationVlan OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..4095)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Destination VLAN to use for traffic classification"
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { alaQoSConditionEntry 29 }
|
||
|
|
|
||
|
|
alaQoSConditionDestinationVlanStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the destination VLAN
|
||
|
|
needs to be matched(enabled) or not(disabled)."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSConditionEntry 30 }
|
||
|
|
|
||
|
|
alaQoSCondition8021p OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..7)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "802.1p value to use for traffic classification"
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { alaQoSConditionEntry 31 }
|
||
|
|
|
||
|
|
alaQoSCondition8021pStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the 802.1p value
|
||
|
|
needs to be matched(enabled) or not(disabled)."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSConditionEntry 32 }
|
||
|
|
|
||
|
|
alaQoSConditionSourceIpAddr OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Source IP address to use for traffic classification"
|
||
|
|
DEFVAL { '00000000'h }
|
||
|
|
::= { alaQoSConditionEntry 33 }
|
||
|
|
|
||
|
|
alaQoSConditionSourceIpAddrStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the source IP address & mask
|
||
|
|
needs to be matched(enabled) or not(disabled)."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSConditionEntry 34 }
|
||
|
|
|
||
|
|
alaQoSConditionSourceIpMask OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Source IP mask to use for traffic classification"
|
||
|
|
DEFVAL { 'ffffffff'h }
|
||
|
|
::= { alaQoSConditionEntry 35 }
|
||
|
|
|
||
|
|
alaQoSConditionSourceNetworkGroup OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..31))
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Source network group to use for traffic classification"
|
||
|
|
::= { alaQoSConditionEntry 36 }
|
||
|
|
|
||
|
|
alaQoSConditionSourceNetworkGroupStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the source network group
|
||
|
|
needs to be matched(enabled) or not(disabled)."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSConditionEntry 37 }
|
||
|
|
|
||
|
|
alaQoSConditionDestinationIpAddr OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Destination IP address to use for traffic classification"
|
||
|
|
DEFVAL { '00000000'h }
|
||
|
|
::= { alaQoSConditionEntry 38 }
|
||
|
|
|
||
|
|
alaQoSConditionDestinationIpAddrStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the destination IP address
|
||
|
|
& mask needs to be matched(enabled) or not(disabled)."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSConditionEntry 39 }
|
||
|
|
|
||
|
|
alaQoSConditionDestinationIpMask OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Destination IP mask to use for traffic classification"
|
||
|
|
DEFVAL { 'ffffffff'h }
|
||
|
|
::= { alaQoSConditionEntry 40 }
|
||
|
|
|
||
|
|
alaQoSConditionDestinationNetworkGroup OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..31))
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Destination network group to use for traffic classification"
|
||
|
|
::= { alaQoSConditionEntry 41 }
|
||
|
|
|
||
|
|
alaQoSConditionDestinationNetworkGroupStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the destination network group
|
||
|
|
needs to be matched(enabled) or not(disabled)."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSConditionEntry 42 }
|
||
|
|
|
||
|
|
alaQoSConditionMulticastIpAddr OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Multicast IP address to use for traffic classification"
|
||
|
|
DEFVAL { '00000000'h }
|
||
|
|
::= { alaQoSConditionEntry 43 }
|
||
|
|
|
||
|
|
alaQoSConditionMulticastIpAddrStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the multicast IP address & mask
|
||
|
|
needs to be matched(enabled) or not(disabled)."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSConditionEntry 44 }
|
||
|
|
|
||
|
|
alaQoSConditionMulticastIpMask OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Multicast IP mask to use for traffic classification"
|
||
|
|
DEFVAL { 'ffffffff'h }
|
||
|
|
::= { alaQoSConditionEntry 45 }
|
||
|
|
|
||
|
|
alaQoSConditionMulticastNetworkGroup OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..31))
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Multicast network group to use for traffic classification"
|
||
|
|
::= { alaQoSConditionEntry 46 }
|
||
|
|
|
||
|
|
alaQoSConditionMulticastNetworkGroupStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the multicast network group
|
||
|
|
needs to be matched(enabled) or not(disabled)."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSConditionEntry 47 }
|
||
|
|
|
||
|
|
alaQoSConditionTos OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..7)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "TOS value to use for traffic classification"
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { alaQoSConditionEntry 48 }
|
||
|
|
|
||
|
|
alaQoSConditionTosStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the TOS value & mask
|
||
|
|
needs to be matched(enabled) or not(disabled)."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSConditionEntry 49 }
|
||
|
|
|
||
|
|
alaQoSConditionTosMask OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..7)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "TOS mask to use for traffic classification"
|
||
|
|
DEFVAL { 7 }
|
||
|
|
::= { alaQoSConditionEntry 50 }
|
||
|
|
|
||
|
|
alaQoSConditionDscp OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..63)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "DSCP value to use for traffic classification"
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { alaQoSConditionEntry 51 }
|
||
|
|
|
||
|
|
alaQoSConditionDscpStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the DSCP value & mask
|
||
|
|
needs to be matched(enabled) or not(disabled)."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSConditionEntry 52 }
|
||
|
|
|
||
|
|
alaQoSConditionDscpMask OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..63)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "DSCP mask to use for traffic classification"
|
||
|
|
DEFVAL { 63 }
|
||
|
|
::= { alaQoSConditionEntry 53 }
|
||
|
|
|
||
|
|
alaQoSConditionIpProtocol OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..255)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "IP protocol to use for traffic classification."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { alaQoSConditionEntry 54 }
|
||
|
|
|
||
|
|
alaQoSConditionIpProtocolStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the IP protocol
|
||
|
|
needs to be matched(enabled) or not(disabled)."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSConditionEntry 55 }
|
||
|
|
|
||
|
|
alaQoSConditionSourceIpPort OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..65535)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Source IP port range start to use for traffic classification."
|
||
|
|
::= { alaQoSConditionEntry 56 }
|
||
|
|
|
||
|
|
alaQoSConditionSourceIpPortStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the source IP port range
|
||
|
|
needs to be matched(enabled) or not(disabled)."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSConditionEntry 57 }
|
||
|
|
|
||
|
|
alaQoSConditionDestinationIpPort OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..65535)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Destination IP port range start to use for traffic
|
||
|
|
classification."
|
||
|
|
::= { alaQoSConditionEntry 58 }
|
||
|
|
|
||
|
|
alaQoSConditionDestinationIpPortStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the destination IP port range
|
||
|
|
needs to be matched(enabled) or not(disabled)."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSConditionEntry 59 }
|
||
|
|
|
||
|
|
alaQoSConditionService OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..31))
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Name of service to use for traffic classification"
|
||
|
|
::= { alaQoSConditionEntry 60 }
|
||
|
|
|
||
|
|
alaQoSConditionServiceStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the service
|
||
|
|
needs to be matched(enabled) or not(disabled)."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSConditionEntry 61 }
|
||
|
|
|
||
|
|
alaQoSConditionServiceGroup OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..31))
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Name of service group to use for traffic classification"
|
||
|
|
::= { alaQoSConditionEntry 62 }
|
||
|
|
|
||
|
|
alaQoSConditionServiceGroupStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the service group
|
||
|
|
needs to be matched(enabled) or not(disabled)."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSConditionEntry 63 }
|
||
|
|
|
||
|
|
alaQoSConditionIcmpType OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..255)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "ICMP type to use for traffic classification"
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { alaQoSConditionEntry 64 }
|
||
|
|
|
||
|
|
alaQoSConditionIcmpTypeStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the ICMP type
|
||
|
|
needs to be matched(enabled) or not(disabled)."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSConditionEntry 65 }
|
||
|
|
|
||
|
|
alaQoSConditionIcmpCode OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..255)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "ICMP code to use for traffic classification"
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { alaQoSConditionEntry 66 }
|
||
|
|
|
||
|
|
alaQoSConditionIcmpCodeStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the ICMP code
|
||
|
|
needs to be matched(enabled) or not(disabled)."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSConditionEntry 67 }
|
||
|
|
|
||
|
|
alaQoSConditionDlci OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..512)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "DLCI to use to traffic classification"
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { alaQoSConditionEntry 68 }
|
||
|
|
|
||
|
|
alaQoSConditionDlciStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the DLCI
|
||
|
|
needs to be matched(enabled) or not(disabled)."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSConditionEntry 69 }
|
||
|
|
|
||
|
|
alaQoSConditionRowStatus OBJECT-TYPE
|
||
|
|
SYNTAX RowStatus
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Used to create/delete conditions according to the
|
||
|
|
RowStatus convention"
|
||
|
|
::= { alaQoSConditionEntry 70 }
|
||
|
|
|
||
|
|
alaQoSConditionSourcePortEnd OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..52)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Source physical port range end to use for traffic
|
||
|
|
classification. Must be greater than port range start to
|
||
|
|
indicate a range. When '1', use source port as a single port."
|
||
|
|
DEFVAL { 1 }
|
||
|
|
::= { alaQoSConditionEntry 71 }
|
||
|
|
|
||
|
|
alaQoSConditionDestinationPortEnd OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..52)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Destination physical port range end to use for traffic
|
||
|
|
classification. Must be greater than port range start to
|
||
|
|
indicate a range. When '1', use destination port as a single
|
||
|
|
port."
|
||
|
|
DEFVAL { 1 }
|
||
|
|
::= { alaQoSConditionEntry 72 }
|
||
|
|
|
||
|
|
alaQoSConditionSourceIpPortEnd OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..65535)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Source IP port range end to use for traffic classification.
|
||
|
|
Must be greater than source IP port range start to indicate a
|
||
|
|
range. When '0', use source IP port as a single IP port."
|
||
|
|
::= { alaQoSConditionEntry 73 }
|
||
|
|
|
||
|
|
alaQoSConditionDestinationIpPortEnd OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..65535)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Destination IP port range end to use for traffic classification.
|
||
|
|
Must be greater than destination IP port range start to indicate
|
||
|
|
a range. When '0', use destination IP port as a single IP port."
|
||
|
|
::= { alaQoSConditionEntry 74 }
|
||
|
|
|
||
|
|
alaQoSConditionSourceTcpPort OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..65535)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Source TCP port range start to use for traffic classification."
|
||
|
|
::= { alaQoSConditionEntry 75 }
|
||
|
|
|
||
|
|
alaQoSConditionSourceTcpPortStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the source TCP port range
|
||
|
|
needs to be matched(enabled) or not(disabled)."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSConditionEntry 76 }
|
||
|
|
|
||
|
|
alaQoSConditionSourceTcpPortEnd OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..65535)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Source TCP port range end to use for traffic classification.
|
||
|
|
Must be greater than source TCP port range start to indicate a
|
||
|
|
range. When '0', use source TCP port as a single TCP port."
|
||
|
|
::= { alaQoSConditionEntry 77 }
|
||
|
|
|
||
|
|
alaQoSConditionDestinationTcpPort OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..65535)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Destination TCP port range start to use for traffic
|
||
|
|
classification."
|
||
|
|
::= { alaQoSConditionEntry 78 }
|
||
|
|
|
||
|
|
alaQoSConditionDestinationTcpPortStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the destination TCP port range
|
||
|
|
needs to be matched(enabled) or not(disabled)."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSConditionEntry 79 }
|
||
|
|
|
||
|
|
alaQoSConditionDestinationTcpPortEnd OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..65535)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Destination TCP port range end to use for traffic
|
||
|
|
classification. Must be greater than destination TCP port range
|
||
|
|
start to indicate a range. When '0', use destination TCP port
|
||
|
|
as a single TCP port."
|
||
|
|
::= { alaQoSConditionEntry 80 }
|
||
|
|
|
||
|
|
alaQoSConditionSourceUdpPort OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..65535)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Source UDP port range start to use for traffic classification."
|
||
|
|
::= { alaQoSConditionEntry 81 }
|
||
|
|
|
||
|
|
alaQoSConditionSourceUdpPortStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the source UDP port range
|
||
|
|
needs to be matched(enabled) or not(disabled)."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSConditionEntry 82 }
|
||
|
|
|
||
|
|
alaQoSConditionSourceUdpPortEnd OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..65535)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Source UDP port range end to use for traffic classification.
|
||
|
|
Must be greater than source UDP port range start to indicate
|
||
|
|
a range. When '0', use source UDP port as a single UDP port."
|
||
|
|
::= { alaQoSConditionEntry 83 }
|
||
|
|
|
||
|
|
alaQoSConditionDestinationUdpPort OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..65535)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Destination UDP port range start to use for traffic
|
||
|
|
classification."
|
||
|
|
::= { alaQoSConditionEntry 84 }
|
||
|
|
|
||
|
|
alaQoSConditionDestinationUdpPortStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the destination UDP port range
|
||
|
|
needs to be matched(enabled) or not(disabled)."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSConditionEntry 85 }
|
||
|
|
|
||
|
|
alaQoSConditionDestinationUdpPortEnd OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..65535)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Destination UDP port range end to use for traffic
|
||
|
|
classification. Must be greater than destination UDP port range
|
||
|
|
start to indicate a range. When '0', use destination UDP port
|
||
|
|
as a single TCP port."
|
||
|
|
::= { alaQoSConditionEntry 86 }
|
||
|
|
|
||
|
|
alaQoSConditionEthertype OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..65535)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Ethertype value to use for traffic classification"
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { alaQoSConditionEntry 87 }
|
||
|
|
|
||
|
|
alaQoSConditionEthertypeStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the ethertype value
|
||
|
|
needs to be matched(enabled) or not(disabled)."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSConditionEntry 88 }
|
||
|
|
|
||
|
|
alaQoSConditionTcpFlags OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
all (1),
|
||
|
|
any (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Use any/all specifieid TCP flags for traffic classification"
|
||
|
|
DEFVAL { all }
|
||
|
|
::= { alaQoSConditionEntry 89 }
|
||
|
|
|
||
|
|
alaQoSConditionTcpFlagsStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the TCP flag bits
|
||
|
|
needs to be matched(enabled) or not(disabled)."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSConditionEntry 90 }
|
||
|
|
|
||
|
|
alaQoSConditionTcpFlagsVal OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "TCP flags values used for traffic classification"
|
||
|
|
::= { alaQoSConditionEntry 91 }
|
||
|
|
|
||
|
|
alaQoSConditionTcpFlagsValStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Not used"
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSConditionEntry 92 }
|
||
|
|
|
||
|
|
alaQoSConditionTcpFlagsMask OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Mask of TCP flags bits used for traffic classification"
|
||
|
|
::= { alaQoSConditionEntry 93 }
|
||
|
|
|
||
|
|
alaQoSConditionTcpFlagsMaskStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Not used"
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSConditionEntry 94 }
|
||
|
|
|
||
|
|
alaQoSConditionTcpEstablished OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
yes (1),
|
||
|
|
no (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Look for established TCP sessions in classification"
|
||
|
|
DEFVAL { no }
|
||
|
|
::= { alaQoSConditionEntry 95 }
|
||
|
|
|
||
|
|
alaQoSConditionSourceIpv6Addr OBJECT-TYPE
|
||
|
|
SYNTAX Ipv6Address
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Source IPv6 address to use for traffic classification"
|
||
|
|
DEFVAL { '00000000000000000000000000000000'h }
|
||
|
|
::= { alaQoSConditionEntry 96 }
|
||
|
|
|
||
|
|
alaQoSConditionSourceIpv6AddrStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the source IPv6 address & mask
|
||
|
|
needs to be matched(enabled) or not(disabled)."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSConditionEntry 97 }
|
||
|
|
|
||
|
|
alaQoSConditionSourceIpv6Mask OBJECT-TYPE
|
||
|
|
SYNTAX Ipv6Address
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Source IPv6 mask to use for traffic classification"
|
||
|
|
DEFVAL { 'ffffffffffffffffffffffffffffffff'h }
|
||
|
|
::= { alaQoSConditionEntry 98 }
|
||
|
|
|
||
|
|
alaQoSConditionDestinationIpv6Addr OBJECT-TYPE
|
||
|
|
SYNTAX Ipv6Address
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Destination IPv6 address to use for traffic classification"
|
||
|
|
DEFVAL { '00000000000000000000000000000000'h }
|
||
|
|
::= { alaQoSConditionEntry 99 }
|
||
|
|
|
||
|
|
alaQoSConditionDestinationIpv6AddrStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the destination IPv6 address & mask
|
||
|
|
needs to be matched(enabled) or not(disabled)."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSConditionEntry 100 }
|
||
|
|
|
||
|
|
alaQoSConditionDestinationIpv6Mask OBJECT-TYPE
|
||
|
|
SYNTAX Ipv6Address
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Destination IPv6 mask to use for traffic classification"
|
||
|
|
DEFVAL { 'ffffffffffffffffffffffffffffffff'h }
|
||
|
|
::= { alaQoSConditionEntry 101 }
|
||
|
|
|
||
|
|
alaQoSConditionIpv6Traffic OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
yes (1),
|
||
|
|
no (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "classify IPV6 traffic "
|
||
|
|
::= { alaQoSConditionEntry 102 }
|
||
|
|
|
||
|
|
alaQoSConditionIpv6NH OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..255)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "NH value to use for traffic classification"
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { alaQoSConditionEntry 103 }
|
||
|
|
|
||
|
|
alaQoSConditionIpv6NHStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the NH value
|
||
|
|
needs to be matched(enabled) or not(disabled)."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSConditionEntry 104 }
|
||
|
|
|
||
|
|
alaQoSConditionIpv6FlowLabel OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..1048575)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "FL value to use for traffic classification"
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { alaQoSConditionEntry 105 }
|
||
|
|
|
||
|
|
alaQoSConditionIpv6FlowLabelStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the flow label value
|
||
|
|
needs to be matched(enabled) or not(disabled)."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSConditionEntry 106 }
|
||
|
|
|
||
|
|
alaQoSConditionMcastIpv6Addr OBJECT-TYPE
|
||
|
|
SYNTAX Ipv6Address
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Multicast IPv6 address to use for traffic classification"
|
||
|
|
DEFVAL { '00000000000000000000000000000000'h }
|
||
|
|
::= { alaQoSConditionEntry 107 }
|
||
|
|
|
||
|
|
alaQoSConditionMcastIpv6AddrStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the multicast IPv6 address & mask
|
||
|
|
needs to be matched(enabled) or not(disabled)."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSConditionEntry 108 }
|
||
|
|
|
||
|
|
alaQoSConditionMcastIpv6Mask OBJECT-TYPE
|
||
|
|
SYNTAX Ipv6Address
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Multicast IPv6 mask to use for traffic classification"
|
||
|
|
DEFVAL { 'ffffffffffffffffffffffffffffffff'h }
|
||
|
|
::= { alaQoSConditionEntry 109 }
|
||
|
|
|
||
|
|
alaQoSConditionDscpEnd OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..63)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "DSCP value to use for traffic classification"
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { alaQoSConditionEntry 110 }
|
||
|
|
|
||
|
|
alaQoSConditionInnerSourceVlan OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..4095)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Customer VLAN to use for traffic classification"
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { alaQoSConditionEntry 111 }
|
||
|
|
|
||
|
|
alaQoSConditionInnerSourceVlanStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the inner VLAN
|
||
|
|
needs to be matched(enabled) or not(disabled)."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSConditionEntry 112 }
|
||
|
|
|
||
|
|
alaQoSConditionInner8021p OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..7)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Customer 802.1p to use for traffic classification"
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { alaQoSConditionEntry 113 }
|
||
|
|
|
||
|
|
alaQoSConditionInner8021pStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the inner 802.1p
|
||
|
|
needs to be matched(enabled) or not(disabled)."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSConditionEntry 114 }
|
||
|
|
|
||
|
|
alaQoSConditionVrfName OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..31))
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Name of Vrf to match traffic in"
|
||
|
|
::= { alaQoSConditionEntry 115 }
|
||
|
|
|
||
|
|
alaQoSConditionVrfNameStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the traffic from a specific vrf needs to be matched(enabled) or not(disabled)."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSConditionEntry 116 }
|
||
|
|
|
||
|
|
alaQoSCondition8021pEnd OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..7)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "802.1p range end value to use for traffic classification."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { alaQoSConditionEntry 117 }
|
||
|
|
|
||
|
|
alaQoSConditionInner8021pEnd OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..7)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Inner 802.1p range end value to use for traffic
|
||
|
|
classification."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { alaQoSConditionEntry 118 }
|
||
|
|
|
||
|
|
alaQoSConditionSourceVlanGroup OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..31))
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Source vlan group to use for traffic classification"
|
||
|
|
::= { alaQoSConditionEntry 119 }
|
||
|
|
|
||
|
|
alaQoSConditionSourceVlanGroupStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether to use for traffic
|
||
|
|
classification (enabled) or not (disabled) for source
|
||
|
|
vlan group."
|
||
|
|
::= { alaQoSConditionEntry 120 }
|
||
|
|
|
||
|
|
alaQoSConditionInnerSourceVlanGroup OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..31))
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Inner Source vlan group to use for traffic classification"
|
||
|
|
::= { alaQoSConditionEntry 121 }
|
||
|
|
|
||
|
|
alaQoSConditionInnerSourceVlanGroupStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether to use for traffic
|
||
|
|
classification (enabled) or not (disabled) for inner
|
||
|
|
source vlan group."
|
||
|
|
::= { alaQoSConditionEntry 122 }
|
||
|
|
|
||
|
|
--
|
||
|
|
-- Definition of condition table
|
||
|
|
--
|
||
|
|
|
||
|
|
alaQoSAppliedConditionTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF QoSAppliedConditionEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Table of QoS AppliedCondition definitions"
|
||
|
|
::= { alaQoSMIBObjects 4 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionEntry OBJECT-TYPE
|
||
|
|
SYNTAX QoSAppliedConditionEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Definition of QoS AppliedCondition"
|
||
|
|
INDEX {
|
||
|
|
alaQoSAppliedConditionName
|
||
|
|
}
|
||
|
|
::= { alaQoSAppliedConditionTable 1 }
|
||
|
|
|
||
|
|
QoSAppliedConditionEntry ::=
|
||
|
|
SEQUENCE
|
||
|
|
{
|
||
|
|
alaQoSAppliedConditionName DisplayString,
|
||
|
|
alaQoSAppliedConditionSource INTEGER,
|
||
|
|
alaQoSAppliedConditionSourceSlot Integer32,
|
||
|
|
alaQoSAppliedConditionSourceSlotStatus INTEGER,
|
||
|
|
alaQoSAppliedConditionSourcePort Integer32,
|
||
|
|
alaQoSAppliedConditionSourcePortGroup DisplayString,
|
||
|
|
alaQoSAppliedConditionSourcePortGroupStatus INTEGER,
|
||
|
|
alaQoSAppliedConditionDestinationSlot Integer32,
|
||
|
|
alaQoSAppliedConditionDestinationSlotStatus INTEGER,
|
||
|
|
alaQoSAppliedConditionDestinationPort Integer32,
|
||
|
|
alaQoSAppliedConditionDestinationPortGroup DisplayString,
|
||
|
|
alaQoSAppliedConditionDestinationPortGroupStatus INTEGER,
|
||
|
|
alaQoSAppliedConditionSourceInterfaceType INTEGER,
|
||
|
|
alaQoSAppliedConditionSourceInterfaceTypeStatus INTEGER,
|
||
|
|
alaQoSAppliedConditionDestinationInterfaceType INTEGER,
|
||
|
|
alaQoSAppliedConditionDestinationInterfaceTypeStatus INTEGER,
|
||
|
|
alaQoSAppliedConditionSourceMacAddr MacAddress,
|
||
|
|
alaQoSAppliedConditionSourceMacAddrStatus INTEGER,
|
||
|
|
alaQoSAppliedConditionSourceMacMask MacAddress,
|
||
|
|
alaQoSAppliedConditionSourceMacGroup DisplayString,
|
||
|
|
alaQoSAppliedConditionSourceMacGroupStatus INTEGER,
|
||
|
|
alaQoSAppliedConditionDestinationMacAddr MacAddress,
|
||
|
|
alaQoSAppliedConditionDestinationMacAddrStatus INTEGER,
|
||
|
|
alaQoSAppliedConditionDestinationMacMask MacAddress,
|
||
|
|
alaQoSAppliedConditionDestinationMacGroup DisplayString,
|
||
|
|
alaQoSAppliedConditionDestinationMacGroupStatus INTEGER,
|
||
|
|
alaQoSAppliedConditionSourceVlan Integer32,
|
||
|
|
alaQoSAppliedConditionSourceVlanStatus INTEGER,
|
||
|
|
alaQoSAppliedConditionDestinationVlan Integer32,
|
||
|
|
alaQoSAppliedConditionDestinationVlanStatus INTEGER,
|
||
|
|
alaQoSAppliedCondition8021p Integer32,
|
||
|
|
alaQoSAppliedCondition8021pStatus INTEGER,
|
||
|
|
alaQoSAppliedConditionSourceIpAddr IpAddress,
|
||
|
|
alaQoSAppliedConditionSourceIpAddrStatus INTEGER,
|
||
|
|
alaQoSAppliedConditionSourceIpMask IpAddress,
|
||
|
|
alaQoSAppliedConditionSourceNetworkGroup DisplayString,
|
||
|
|
alaQoSAppliedConditionSourceNetworkGroupStatus INTEGER,
|
||
|
|
alaQoSAppliedConditionDestinationIpAddr IpAddress,
|
||
|
|
alaQoSAppliedConditionDestinationIpAddrStatus INTEGER,
|
||
|
|
alaQoSAppliedConditionDestinationIpMask IpAddress,
|
||
|
|
alaQoSAppliedConditionDestinationNetworkGroup DisplayString,
|
||
|
|
alaQoSAppliedConditionDestinationNetworkGroupStatus INTEGER,
|
||
|
|
alaQoSAppliedConditionMulticastIpAddr IpAddress,
|
||
|
|
alaQoSAppliedConditionMulticastIpAddrStatus INTEGER,
|
||
|
|
alaQoSAppliedConditionMulticastIpMask IpAddress,
|
||
|
|
alaQoSAppliedConditionMulticastNetworkGroup DisplayString,
|
||
|
|
alaQoSAppliedConditionMulticastNetworkGroupStatus INTEGER,
|
||
|
|
alaQoSAppliedConditionTos Integer32,
|
||
|
|
alaQoSAppliedConditionTosStatus INTEGER,
|
||
|
|
alaQoSAppliedConditionTosMask Integer32,
|
||
|
|
alaQoSAppliedConditionDscp Integer32,
|
||
|
|
alaQoSAppliedConditionDscpStatus INTEGER,
|
||
|
|
alaQoSAppliedConditionDscpMask Integer32,
|
||
|
|
alaQoSAppliedConditionIpProtocol Integer32,
|
||
|
|
alaQoSAppliedConditionIpProtocolStatus INTEGER,
|
||
|
|
alaQoSAppliedConditionSourceIpPort Integer32,
|
||
|
|
alaQoSAppliedConditionSourceIpPortStatus INTEGER,
|
||
|
|
alaQoSAppliedConditionDestinationIpPort Integer32,
|
||
|
|
alaQoSAppliedConditionDestinationIpPortStatus INTEGER,
|
||
|
|
alaQoSAppliedConditionService DisplayString,
|
||
|
|
alaQoSAppliedConditionServiceStatus INTEGER,
|
||
|
|
alaQoSAppliedConditionServiceGroup DisplayString,
|
||
|
|
alaQoSAppliedConditionServiceGroupStatus INTEGER,
|
||
|
|
alaQoSAppliedConditionIcmpType Integer32,
|
||
|
|
alaQoSAppliedConditionIcmpTypeStatus INTEGER,
|
||
|
|
alaQoSAppliedConditionIcmpCode Integer32,
|
||
|
|
alaQoSAppliedConditionIcmpCodeStatus INTEGER,
|
||
|
|
alaQoSAppliedConditionDlci Integer32,
|
||
|
|
alaQoSAppliedConditionDlciStatus INTEGER,
|
||
|
|
alaQoSAppliedConditionRowStatus RowStatus,
|
||
|
|
alaQoSAppliedConditionSourcePortEnd Integer32,
|
||
|
|
alaQoSAppliedConditionDestinationPortEnd Integer32,
|
||
|
|
alaQoSAppliedConditionSourceIpPortEnd Integer32,
|
||
|
|
alaQoSAppliedConditionDestinationIpPortEnd Integer32,
|
||
|
|
alaQoSAppliedConditionSourceTcpPort Integer32,
|
||
|
|
alaQoSAppliedConditionSourceTcpPortStatus INTEGER,
|
||
|
|
alaQoSAppliedConditionSourceTcpPortEnd Integer32,
|
||
|
|
alaQoSAppliedConditionDestinationTcpPort Integer32,
|
||
|
|
alaQoSAppliedConditionDestinationTcpPortStatus INTEGER,
|
||
|
|
alaQoSAppliedConditionDestinationTcpPortEnd Integer32,
|
||
|
|
alaQoSAppliedConditionSourceUdpPort Integer32,
|
||
|
|
alaQoSAppliedConditionSourceUdpPortStatus INTEGER,
|
||
|
|
alaQoSAppliedConditionSourceUdpPortEnd Integer32,
|
||
|
|
alaQoSAppliedConditionDestinationUdpPort Integer32,
|
||
|
|
alaQoSAppliedConditionDestinationUdpPortStatus INTEGER,
|
||
|
|
alaQoSAppliedConditionDestinationUdpPortEnd Integer32,
|
||
|
|
alaQoSAppliedConditionEthertype Integer32,
|
||
|
|
alaQoSAppliedConditionEthertypeStatus INTEGER,
|
||
|
|
alaQoSAppliedConditionTcpFlags INTEGER,
|
||
|
|
alaQoSAppliedConditionTcpFlagsStatus INTEGER,
|
||
|
|
alaQoSAppliedConditionTcpFlagsVal Integer32,
|
||
|
|
alaQoSAppliedConditionTcpFlagsValStatus INTEGER,
|
||
|
|
alaQoSAppliedConditionTcpFlagsMask Integer32,
|
||
|
|
alaQoSAppliedConditionTcpFlagsMaskStatus INTEGER,
|
||
|
|
alaQoSAppliedConditionTcpEstablished INTEGER,
|
||
|
|
alaQoSAppliedConditionSourceIpv6Addr Ipv6Address,
|
||
|
|
alaQoSAppliedConditionSourceIpv6AddrStatus INTEGER,
|
||
|
|
alaQoSAppliedConditionSourceIpv6Mask Ipv6Address,
|
||
|
|
alaQoSAppliedConditionDestinationIpv6Addr Ipv6Address,
|
||
|
|
alaQoSAppliedConditionDestinationIpv6AddrStatus INTEGER,
|
||
|
|
alaQoSAppliedConditionDestinationIpv6Mask Ipv6Address,
|
||
|
|
alaQoSAppliedConditionIpv6Traffic INTEGER,
|
||
|
|
alaQoSAppliedConditionIpv6NH Integer32,
|
||
|
|
alaQoSAppliedConditionIpv6NHStatus INTEGER,
|
||
|
|
alaQoSAppliedConditionIpv6FlowLabel Integer32,
|
||
|
|
alaQoSAppliedConditionIpv6FlowLabelStatus INTEGER,
|
||
|
|
alaQoSAppliedConditionMcastIpv6Addr Ipv6Address,
|
||
|
|
alaQoSAppliedConditionMcastIpv6AddrStatus INTEGER,
|
||
|
|
alaQoSAppliedConditionMcastIpv6Mask Ipv6Address,
|
||
|
|
alaQoSAppliedConditionDscpEnd Integer32,
|
||
|
|
alaQoSAppliedConditionInnerSourceVlan Integer32,
|
||
|
|
alaQoSAppliedConditionInnerSourceVlanStatus INTEGER,
|
||
|
|
alaQoSAppliedConditionInner8021p Integer32,
|
||
|
|
alaQoSAppliedConditionInner8021pStatus INTEGER,
|
||
|
|
alaQoSAppliedConditionVrfName DisplayString,
|
||
|
|
alaQoSAppliedConditionVrfNameStatus INTEGER,
|
||
|
|
alaQoSAppliedCondition8021pEnd Integer32,
|
||
|
|
alaQoSAppliedConditionInner8021pEnd Integer32,
|
||
|
|
alaQoSAppliedConditionSourceVlanGroup DisplayString,
|
||
|
|
alaQoSAppliedConditionSourceVlanGroupStatus INTEGER,
|
||
|
|
alaQoSAppliedConditionInnerSourceVlanGroup DisplayString,
|
||
|
|
alaQoSAppliedConditionInnerSourceVlanGroupStatus INTEGER
|
||
|
|
}
|
||
|
|
|
||
|
|
alaQoSAppliedConditionName OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..31))
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Name of condition"
|
||
|
|
::= { alaQoSAppliedConditionEntry 1 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionSource OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
ldap (1),
|
||
|
|
cli (2),
|
||
|
|
blt (3),
|
||
|
|
api (4),
|
||
|
|
imp (5)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "What entity created the condition."
|
||
|
|
::= { alaQoSAppliedConditionEntry 2 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionSourceSlot OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..16)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Source physical slot used for traffic classification
|
||
|
|
When 0, the port identifies an aggregate"
|
||
|
|
::= { alaQoSAppliedConditionEntry 3 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionSourceSlotStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the source physical slot and
|
||
|
|
port range needs to be matched(enabled) or not(disabled)."
|
||
|
|
::= { alaQoSAppliedConditionEntry 4 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionSourcePort OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..52)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Source physical port range start to use for
|
||
|
|
traffic classification"
|
||
|
|
::= { alaQoSAppliedConditionEntry 5 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionSourcePortGroup OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..31))
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Source physical port group to use for traffic classification"
|
||
|
|
::= { alaQoSAppliedConditionEntry 6 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionSourcePortGroupStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the source physical port group
|
||
|
|
needs to be matched(enabled) or not(disabled)."
|
||
|
|
::= { alaQoSAppliedConditionEntry 7 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionDestinationSlot OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..16)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Destination physical slot used for traffic classification
|
||
|
|
When 0, the port identifies an aggregate"
|
||
|
|
::= { alaQoSAppliedConditionEntry 8 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionDestinationSlotStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the destination physical slot
|
||
|
|
and port range needs to be matched(enabled) or not(disabled)."
|
||
|
|
::= { alaQoSAppliedConditionEntry 9 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionDestinationPort OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..52)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Destination physical port range start to use for traffic
|
||
|
|
classification"
|
||
|
|
::= { alaQoSAppliedConditionEntry 10 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionDestinationPortGroup OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..31))
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Destination physical port group to use for traffic
|
||
|
|
classification"
|
||
|
|
::= { alaQoSAppliedConditionEntry 11 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionDestinationPortGroupStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the destination physical port
|
||
|
|
group needs to be matched(enabled) or not(disabled)."
|
||
|
|
::= { alaQoSAppliedConditionEntry 12 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionSourceInterfaceType OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
ethernet (1),
|
||
|
|
wan (2),
|
||
|
|
ethernet10 (3),
|
||
|
|
ethernet100 (4),
|
||
|
|
ethernet1G (5),
|
||
|
|
ethernet10G (6),
|
||
|
|
aggregate (7)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Source physical interface type to use for traffic
|
||
|
|
classification"
|
||
|
|
::= { alaQoSAppliedConditionEntry 13 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionSourceInterfaceTypeStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the source physical
|
||
|
|
interface type needs to be matched(enabled) or not(disabled)."
|
||
|
|
::= { alaQoSAppliedConditionEntry 14 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionDestinationInterfaceType OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
ethernet (1),
|
||
|
|
wan (2),
|
||
|
|
ethernet10 (3),
|
||
|
|
ethernet100 (4),
|
||
|
|
ethernet1G (5),
|
||
|
|
ethernet10G (6),
|
||
|
|
aggregate (7)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Destination physical interface type to use for traffic
|
||
|
|
classification"
|
||
|
|
::= { alaQoSAppliedConditionEntry 15 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionDestinationInterfaceTypeStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the destination physical
|
||
|
|
interface type needs to be matched(enabled) or not(disabled)."
|
||
|
|
::= { alaQoSAppliedConditionEntry 16 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionSourceMacAddr OBJECT-TYPE
|
||
|
|
SYNTAX MacAddress
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Source MAC address to use for traffic classification"
|
||
|
|
::= { alaQoSAppliedConditionEntry 17 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionSourceMacAddrStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the source MAC address & mask
|
||
|
|
needs to be matched(enabled) or not(disabled)."
|
||
|
|
::= { alaQoSAppliedConditionEntry 18 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionSourceMacMask OBJECT-TYPE
|
||
|
|
SYNTAX MacAddress
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Source MAC mask to use for traffic classification"
|
||
|
|
::= { alaQoSAppliedConditionEntry 19 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionSourceMacGroup OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..31))
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Source MAC group to use for traffic classification"
|
||
|
|
::= { alaQoSAppliedConditionEntry 20 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionSourceMacGroupStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the source MAC group
|
||
|
|
needs to be matched(enabled) or not(disabled)."
|
||
|
|
::= { alaQoSAppliedConditionEntry 21 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionDestinationMacAddr OBJECT-TYPE
|
||
|
|
SYNTAX MacAddress
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Destination MAC address to use for traffic classification"
|
||
|
|
::= { alaQoSAppliedConditionEntry 22 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionDestinationMacAddrStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the destination MAC address
|
||
|
|
& mask needs to be matched(enabled) or not(disabled)."
|
||
|
|
::= { alaQoSAppliedConditionEntry 23 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionDestinationMacMask OBJECT-TYPE
|
||
|
|
SYNTAX MacAddress
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Destination MAC mask to use for traffic classification"
|
||
|
|
::= { alaQoSAppliedConditionEntry 24 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionDestinationMacGroup OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..31))
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Destination MAC group to use for traffic classification"
|
||
|
|
::= { alaQoSAppliedConditionEntry 25 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionDestinationMacGroupStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the destination MAC group
|
||
|
|
needs to be matched(enabled) or not(disabled)."
|
||
|
|
::= { alaQoSAppliedConditionEntry 26 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionSourceVlan OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..4095)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Source VLAN to use for traffic classification"
|
||
|
|
::= { alaQoSAppliedConditionEntry 27 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionSourceVlanStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the source VLAN
|
||
|
|
needs to be matched(enabled) or not(disabled)."
|
||
|
|
::= { alaQoSAppliedConditionEntry 28 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionDestinationVlan OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..4095)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Destination VLAN to use for traffic classification"
|
||
|
|
::= { alaQoSAppliedConditionEntry 29 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionDestinationVlanStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the destination VLAN
|
||
|
|
needs to be matched(enabled) or not(disabled)."
|
||
|
|
::= { alaQoSAppliedConditionEntry 30 }
|
||
|
|
|
||
|
|
alaQoSAppliedCondition8021p OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..7)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "802.1p value to use for traffic classification"
|
||
|
|
::= { alaQoSAppliedConditionEntry 31 }
|
||
|
|
|
||
|
|
alaQoSAppliedCondition8021pStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the 802.1p value
|
||
|
|
needs to be matched(enabled) or not(disabled)."
|
||
|
|
::= { alaQoSAppliedConditionEntry 32 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionSourceIpAddr OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Source IP address to use for traffic classification"
|
||
|
|
::= { alaQoSAppliedConditionEntry 33 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionSourceIpAddrStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the source IP address & mask
|
||
|
|
needs to be matched(enabled) or not(disabled)."
|
||
|
|
::= { alaQoSAppliedConditionEntry 34 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionSourceIpMask OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Source IP mask to use for traffic classification"
|
||
|
|
::= { alaQoSAppliedConditionEntry 35 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionSourceNetworkGroup OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..31))
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Source network group to use for traffic classification"
|
||
|
|
::= { alaQoSAppliedConditionEntry 36 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionSourceNetworkGroupStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the source network group
|
||
|
|
needs to be matched(enabled) or not(disabled)."
|
||
|
|
::= { alaQoSAppliedConditionEntry 37 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionDestinationIpAddr OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Destination IP address to use for traffic classification"
|
||
|
|
::= { alaQoSAppliedConditionEntry 38 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionDestinationIpAddrStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the destination IP address
|
||
|
|
& mask needs to be matched(enabled) or not(disabled)."
|
||
|
|
::= { alaQoSAppliedConditionEntry 39 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionDestinationIpMask OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Destination IP mask to use for traffic classification"
|
||
|
|
::= { alaQoSAppliedConditionEntry 40 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionDestinationNetworkGroup OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..31))
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Destination network group to use for traffic classification"
|
||
|
|
::= { alaQoSAppliedConditionEntry 41 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionDestinationNetworkGroupStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the destination network group
|
||
|
|
needs to be matched(enabled) or not(disabled)."
|
||
|
|
::= { alaQoSAppliedConditionEntry 42 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionMulticastIpAddr OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Multicast IP address to use for traffic classification"
|
||
|
|
::= { alaQoSAppliedConditionEntry 43 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionMulticastIpAddrStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the multicast IP address & mask
|
||
|
|
needs to be matched(enabled) or not(disabled)."
|
||
|
|
::= { alaQoSAppliedConditionEntry 44 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionMulticastIpMask OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Multicast IP mask to use for traffic classification"
|
||
|
|
::= { alaQoSAppliedConditionEntry 45 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionMulticastNetworkGroup OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..31))
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Multicast network group to use for traffic classification"
|
||
|
|
::= { alaQoSAppliedConditionEntry 46 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionMulticastNetworkGroupStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the multicast network group
|
||
|
|
needs to be matched(enabled) or not(disabled)."
|
||
|
|
::= { alaQoSAppliedConditionEntry 47 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionTos OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..7)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "TOS value to use for traffic classification"
|
||
|
|
::= { alaQoSAppliedConditionEntry 48 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionTosStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the TOS value & mask
|
||
|
|
needs to be matched(enabled) or not(disabled)."
|
||
|
|
::= { alaQoSAppliedConditionEntry 49 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionTosMask OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..7)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "TOS mask to use for traffic classification"
|
||
|
|
::= { alaQoSAppliedConditionEntry 50 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionDscp OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..63)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "DSCP value to use for traffic classification"
|
||
|
|
::= { alaQoSAppliedConditionEntry 51 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionDscpStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the DSCP value & mask
|
||
|
|
needs to be matched(enabled) or not(disabled)."
|
||
|
|
::= { alaQoSAppliedConditionEntry 52 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionDscpMask OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..63)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "DSCP mask to use for traffic classification"
|
||
|
|
::= { alaQoSAppliedConditionEntry 53 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionIpProtocol OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..255)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "IP protocol to use for traffic classification."
|
||
|
|
::= { alaQoSAppliedConditionEntry 54 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionIpProtocolStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the IP protocol
|
||
|
|
needs to be matched(enabled) or not(disabled)."
|
||
|
|
::= { alaQoSAppliedConditionEntry 55 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionSourceIpPort OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..65535)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Source IP port range start to use for traffic classification."
|
||
|
|
::= { alaQoSAppliedConditionEntry 56 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionSourceIpPortStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the source IP port range
|
||
|
|
needs to be matched(enabled) or not(disabled)."
|
||
|
|
::= { alaQoSAppliedConditionEntry 57 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionDestinationIpPort OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..65535)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Destination IP port range start to use for traffic
|
||
|
|
classification."
|
||
|
|
::= { alaQoSAppliedConditionEntry 58 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionDestinationIpPortStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the destination IP port range
|
||
|
|
needs to be matched(enabled) or not(disabled)."
|
||
|
|
::= { alaQoSAppliedConditionEntry 59 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionService OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..31))
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Name of service to use for traffic classification"
|
||
|
|
::= { alaQoSAppliedConditionEntry 60 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionServiceStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the service
|
||
|
|
needs to be matched(enabled) or not(disabled)."
|
||
|
|
::= { alaQoSAppliedConditionEntry 61 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionServiceGroup OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..31))
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Name of service group to use for traffic classification"
|
||
|
|
::= { alaQoSAppliedConditionEntry 62 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionServiceGroupStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the service group
|
||
|
|
needs to be matched(enabled) or not(disabled)."
|
||
|
|
::= { alaQoSAppliedConditionEntry 63 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionIcmpType OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..255)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "ICMP type to use for traffic classification"
|
||
|
|
::= { alaQoSAppliedConditionEntry 64 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionIcmpTypeStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the ICMP type
|
||
|
|
needs to be matched(enabled) or not(disabled)."
|
||
|
|
::= { alaQoSAppliedConditionEntry 65 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionIcmpCode OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..255)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "ICMP code to use for traffic classification"
|
||
|
|
::= { alaQoSAppliedConditionEntry 66 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionIcmpCodeStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the ICMP code
|
||
|
|
needs to be matched(enabled) or not(disabled)."
|
||
|
|
::= { alaQoSAppliedConditionEntry 67 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionDlci OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..512)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "DLCI to use to traffic classification"
|
||
|
|
::= { alaQoSAppliedConditionEntry 68 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionDlciStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the DLCI
|
||
|
|
needs to be matched(enabled) or not(disabled)."
|
||
|
|
::= { alaQoSAppliedConditionEntry 69 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionRowStatus OBJECT-TYPE
|
||
|
|
SYNTAX RowStatus
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Used to create/delete conditions according to the
|
||
|
|
RowStatus convention"
|
||
|
|
::= { alaQoSAppliedConditionEntry 70 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionSourcePortEnd OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..52)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Source physical port range end to use for traffic
|
||
|
|
classification. Must be greater than port range start to
|
||
|
|
indicate a range. When '1', use source port as a single port."
|
||
|
|
::= { alaQoSAppliedConditionEntry 71 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionDestinationPortEnd OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..52)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Destination physical port range end to use for traffic
|
||
|
|
classification. Must be greater than port range start to
|
||
|
|
indicate a range. When '1', use destination port as a single
|
||
|
|
port."
|
||
|
|
::= { alaQoSAppliedConditionEntry 72 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionSourceIpPortEnd OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..65535)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Source IP port range end to use for traffic classification.
|
||
|
|
Must be greater than source IP port range start to indicate a
|
||
|
|
range. When '0', use source IP port as a single IP port."
|
||
|
|
::= { alaQoSAppliedConditionEntry 73 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionDestinationIpPortEnd OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..65535)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Destination IP port range end to use for traffic classification.
|
||
|
|
Must be greater than destination IP port range start to indicate
|
||
|
|
a range. When '0', use destination IP port as a single IP port."
|
||
|
|
::= { alaQoSAppliedConditionEntry 74 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionSourceTcpPort OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..65535)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Source TCP port range start to use for traffic classification."
|
||
|
|
::= { alaQoSAppliedConditionEntry 75 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionSourceTcpPortStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the source TCP port range
|
||
|
|
needs to be matched(enabled) or not(disabled)."
|
||
|
|
::= { alaQoSAppliedConditionEntry 76 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionSourceTcpPortEnd OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..65535)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Source TCP port range end to use for traffic classification.
|
||
|
|
Must be greater than source TCP port range start to indicate a
|
||
|
|
range. When '0', use source TCP port as a single TCP port."
|
||
|
|
::= { alaQoSAppliedConditionEntry 77 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionDestinationTcpPort OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..65535)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Destination TCP port range start to use for traffic
|
||
|
|
classification."
|
||
|
|
::= { alaQoSAppliedConditionEntry 78 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionDestinationTcpPortStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the destination TCP port range
|
||
|
|
needs to be matched(enabled) or not(disabled)."
|
||
|
|
::= { alaQoSAppliedConditionEntry 79 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionDestinationTcpPortEnd OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..65535)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Destination TCP port range end to use for traffic
|
||
|
|
classification. Must be greater than destination TCP port range
|
||
|
|
start to indicate a range. When '0', use destination TCP port
|
||
|
|
as a single TCP port."
|
||
|
|
::= { alaQoSAppliedConditionEntry 80 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionSourceUdpPort OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..65535)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Source UDP port range start to use for traffic classification."
|
||
|
|
::= { alaQoSAppliedConditionEntry 81 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionSourceUdpPortStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the source UDP port range
|
||
|
|
needs to be matched(enabled) or not(disabled)."
|
||
|
|
::= { alaQoSAppliedConditionEntry 82 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionSourceUdpPortEnd OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..65535)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Source UDP port range end to use for traffic classification.
|
||
|
|
Must be greater than source UDP port range start to indicate
|
||
|
|
a range. When '0', use source UDP port as a single UDP port."
|
||
|
|
::= { alaQoSAppliedConditionEntry 83 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionDestinationUdpPort OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..65535)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Destination UDP port range start to use for traffic
|
||
|
|
classification."
|
||
|
|
::= { alaQoSAppliedConditionEntry 84 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionDestinationUdpPortStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the destination UDP port range
|
||
|
|
needs to be matched(enabled) or not(disabled)."
|
||
|
|
::= { alaQoSAppliedConditionEntry 85 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionDestinationUdpPortEnd OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..65535)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Destination UDP port range end to use for traffic
|
||
|
|
classification. Must be greater than destination UDP port range
|
||
|
|
start to indicate a range. When '0', use destination UDP port
|
||
|
|
as a single TCP port."
|
||
|
|
::= { alaQoSAppliedConditionEntry 86 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionEthertype OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..65535)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Ethertype value to use for traffic classification"
|
||
|
|
::= { alaQoSAppliedConditionEntry 87 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionEthertypeStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the ethertype value
|
||
|
|
needs to be matched(enabled) or not(disabled)."
|
||
|
|
::= { alaQoSAppliedConditionEntry 88 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionTcpFlags OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
all (1),
|
||
|
|
any (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Use any/all specifieid TCP flags for traffic classification"
|
||
|
|
::= { alaQoSAppliedConditionEntry 89 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionTcpFlagsStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the TCP flag bits
|
||
|
|
needs to be matched(enabled) or not(disabled)."
|
||
|
|
::= { alaQoSAppliedConditionEntry 90 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionTcpFlagsVal OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "TCP flags values used for traffic classification"
|
||
|
|
::= { alaQoSAppliedConditionEntry 91 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionTcpFlagsValStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Not used"
|
||
|
|
::= { alaQoSAppliedConditionEntry 92 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionTcpFlagsMask OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Mask of TCP flags bits used for traffic classification"
|
||
|
|
::= { alaQoSAppliedConditionEntry 93 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionTcpFlagsMaskStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Not used"
|
||
|
|
::= { alaQoSAppliedConditionEntry 94 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionTcpEstablished OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
yes (1),
|
||
|
|
no (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Look for established TCP sessions in classification"
|
||
|
|
::= { alaQoSAppliedConditionEntry 95 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionSourceIpv6Addr OBJECT-TYPE
|
||
|
|
SYNTAX Ipv6Address
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Source IPv6 address to use for traffic classification"
|
||
|
|
::= { alaQoSAppliedConditionEntry 96 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionSourceIpv6AddrStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the source IPv6 address & mask
|
||
|
|
needs to be matched(enabled) or not(disabled)."
|
||
|
|
::= { alaQoSAppliedConditionEntry 97 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionSourceIpv6Mask OBJECT-TYPE
|
||
|
|
SYNTAX Ipv6Address
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Source IPv6 mask to use for traffic classification"
|
||
|
|
::= { alaQoSAppliedConditionEntry 98 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionDestinationIpv6Addr OBJECT-TYPE
|
||
|
|
SYNTAX Ipv6Address
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Destination IPv6 address to use for traffic classification"
|
||
|
|
::= { alaQoSAppliedConditionEntry 99 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionDestinationIpv6AddrStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the destination IPv6 address & mask
|
||
|
|
needs to be matched(enabled) or not(disabled)."
|
||
|
|
::= { alaQoSAppliedConditionEntry 100 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionDestinationIpv6Mask OBJECT-TYPE
|
||
|
|
SYNTAX Ipv6Address
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Destination IPv6 mask to use for traffic classification"
|
||
|
|
::= { alaQoSAppliedConditionEntry 101 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionIpv6Traffic OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
yes (1),
|
||
|
|
no (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "classify IPV6 traffic "
|
||
|
|
::= { alaQoSAppliedConditionEntry 102 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionIpv6NH OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..255)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "NH value to use for traffic classification"
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { alaQoSAppliedConditionEntry 103 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionIpv6NHStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the NH value
|
||
|
|
needs to be matched(enabled) or not(disabled)."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSAppliedConditionEntry 104 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionIpv6FlowLabel OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..1048575)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "FL value to use for traffic classification"
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { alaQoSAppliedConditionEntry 105 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionIpv6FlowLabelStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the flow label value
|
||
|
|
needs to be matched(enabled) or not(disabled)."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSAppliedConditionEntry 106 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionMcastIpv6Addr OBJECT-TYPE
|
||
|
|
SYNTAX Ipv6Address
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Multicast IPv6 address to use for traffic classification"
|
||
|
|
DEFVAL { '00000000000000000000000000000000'h }
|
||
|
|
::= { alaQoSAppliedConditionEntry 107 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionMcastIpv6AddrStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the multicast IPv6 address & mask
|
||
|
|
needs to be matched(enabled) or not(disabled)."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSAppliedConditionEntry 108 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionMcastIpv6Mask OBJECT-TYPE
|
||
|
|
SYNTAX Ipv6Address
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Multicast IPv6 mask to use for traffic classification"
|
||
|
|
DEFVAL { 'ffffffffffffffffffffffffffffffff'h }
|
||
|
|
::= { alaQoSAppliedConditionEntry 109 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionDscpEnd OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..63)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "DSCP value to use for traffic classification"
|
||
|
|
::= { alaQoSAppliedConditionEntry 110 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionInnerSourceVlan OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..4095)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Customer VLAN to use for traffic classification"
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { alaQoSAppliedConditionEntry 111 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionInnerSourceVlanStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the inner VLAN
|
||
|
|
needs to be matched(enabled) or not(disabled)."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSAppliedConditionEntry 112 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionInner8021p OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..7)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Customer 802.1p to use for traffic classification"
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { alaQoSAppliedConditionEntry 113 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionInner8021pStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the inner 802.1p
|
||
|
|
needs to be matched(enabled) or not(disabled)."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSAppliedConditionEntry 114 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionVrfName OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..31))
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Name of Vrf to match traffic in"
|
||
|
|
::= { alaQoSAppliedConditionEntry 115 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionVrfNameStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the traffic from a specific vrf needs
|
||
|
|
to be matched(enabled) or not(disabled)."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSAppliedConditionEntry 116 }
|
||
|
|
|
||
|
|
alaQoSAppliedCondition8021pEnd OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..7)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "802.1p range end value to use for traffic classification."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { alaQoSAppliedConditionEntry 117 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionInner8021pEnd OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..7)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Inner 802.1p range end value to use for traffic classification."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { alaQoSAppliedConditionEntry 118 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionSourceVlanGroup OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..31))
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Source vlan group to use for traffic classification"
|
||
|
|
::= { alaQoSAppliedConditionEntry 119 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionSourceVlanGroupStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether to use for traffic
|
||
|
|
classification (enabled) or not (disabled) for source
|
||
|
|
vlan group."
|
||
|
|
::= { alaQoSAppliedConditionEntry 120 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionInnerSourceVlanGroup OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..31))
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Inner Source vlan group to use for traffic classification"
|
||
|
|
::= { alaQoSAppliedConditionEntry 121 }
|
||
|
|
|
||
|
|
alaQoSAppliedConditionInnerSourceVlanGroupStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether to use for traffic
|
||
|
|
classification (enabled) or not (disabled) for inner
|
||
|
|
source vlan group."
|
||
|
|
::= { alaQoSAppliedConditionEntry 122 }
|
||
|
|
|
||
|
|
--
|
||
|
|
-- Definition of service table
|
||
|
|
--
|
||
|
|
|
||
|
|
alaQoSServiceTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF QoSServiceEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Table of QoS Service definitions"
|
||
|
|
::= { alaQoSMIBObjects 5 }
|
||
|
|
|
||
|
|
alaQoSServiceEntry OBJECT-TYPE
|
||
|
|
SYNTAX QoSServiceEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Definition of QoS Service"
|
||
|
|
INDEX {
|
||
|
|
alaQoSServiceName
|
||
|
|
}
|
||
|
|
::= { alaQoSServiceTable 1 }
|
||
|
|
|
||
|
|
QoSServiceEntry ::=
|
||
|
|
SEQUENCE
|
||
|
|
{
|
||
|
|
alaQoSServiceName DisplayString,
|
||
|
|
alaQoSServiceSource INTEGER,
|
||
|
|
alaQoSServiceProtocol Integer32,
|
||
|
|
alaQoSServiceSourceIpPort Integer32,
|
||
|
|
alaQoSServiceSourceIpPortStatus INTEGER,
|
||
|
|
alaQoSServiceDestinationIpPort Integer32,
|
||
|
|
alaQoSServiceDestinationIpPortStatus INTEGER,
|
||
|
|
alaQoSServiceRowStatus RowStatus,
|
||
|
|
alaQoSServiceSourceIpPortEnd Integer32,
|
||
|
|
alaQoSServiceDestinationIpPortEnd Integer32,
|
||
|
|
alaQoSServiceSourceTcpPort Integer32,
|
||
|
|
alaQoSServiceSourceTcpPortStatus INTEGER,
|
||
|
|
alaQoSServiceSourceTcpPortEnd Integer32,
|
||
|
|
alaQoSServiceDestinationTcpPort Integer32,
|
||
|
|
alaQoSServiceDestinationTcpPortStatus INTEGER,
|
||
|
|
alaQoSServiceDestinationTcpPortEnd Integer32,
|
||
|
|
alaQoSServiceSourceUdpPort Integer32,
|
||
|
|
alaQoSServiceSourceUdpPortStatus INTEGER,
|
||
|
|
alaQoSServiceSourceUdpPortEnd Integer32,
|
||
|
|
alaQoSServiceDestinationUdpPort Integer32,
|
||
|
|
alaQoSServiceDestinationUdpPortStatus INTEGER,
|
||
|
|
alaQoSServiceDestinationUdpPortEnd Integer32
|
||
|
|
}
|
||
|
|
|
||
|
|
alaQoSServiceName OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..31))
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Name of the service"
|
||
|
|
::= { alaQoSServiceEntry 1 }
|
||
|
|
|
||
|
|
alaQoSServiceSource OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
ldap (1),
|
||
|
|
cli (2),
|
||
|
|
blt (3),
|
||
|
|
api (4),
|
||
|
|
imp (5)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "What entity created the service."
|
||
|
|
DEFVAL { cli }
|
||
|
|
::= { alaQoSServiceEntry 2 }
|
||
|
|
|
||
|
|
alaQoSServiceProtocol OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..255)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "protocol field for Service"
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { alaQoSServiceEntry 3 }
|
||
|
|
|
||
|
|
alaQoSServiceSourceIpPort OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..65535)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Source IP port range start to use for traffic classification."
|
||
|
|
::= { alaQoSServiceEntry 4 }
|
||
|
|
|
||
|
|
alaQoSServiceSourceIpPortStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the source IP port range
|
||
|
|
needs to be matched(enabled) or not(disabled)."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSServiceEntry 5 }
|
||
|
|
|
||
|
|
alaQoSServiceDestinationIpPort OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..65535)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Destination IP port range start to use for traffic
|
||
|
|
classification."
|
||
|
|
::= { alaQoSServiceEntry 6 }
|
||
|
|
|
||
|
|
alaQoSServiceDestinationIpPortStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the destination IP port range
|
||
|
|
needs to be matched(enabled) or not(disabled)."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSServiceEntry 7 }
|
||
|
|
|
||
|
|
alaQoSServiceRowStatus OBJECT-TYPE
|
||
|
|
SYNTAX RowStatus
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Used to create/delete services according to the
|
||
|
|
RowStatus convention"
|
||
|
|
::= { alaQoSServiceEntry 8 }
|
||
|
|
|
||
|
|
alaQoSServiceSourceIpPortEnd OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..65535)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Source IP port range end to use for traffic classification.
|
||
|
|
Must be greater than source IP port range start to indicate
|
||
|
|
a range. When '0', use source IP port as a single IP port."
|
||
|
|
::= { alaQoSServiceEntry 9 }
|
||
|
|
|
||
|
|
alaQoSServiceDestinationIpPortEnd OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..65535)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Destination IP port range end to use for traffic classification.
|
||
|
|
Must be greater than destination IP port range start to indicate
|
||
|
|
a range. When '0', use destination IP port as a single IP port."
|
||
|
|
::= { alaQoSServiceEntry 10 }
|
||
|
|
|
||
|
|
alaQoSServiceSourceTcpPort OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..65535)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Source TCP port range start to use for traffic classification."
|
||
|
|
::= { alaQoSServiceEntry 11 }
|
||
|
|
|
||
|
|
alaQoSServiceSourceTcpPortStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the source TCP port range
|
||
|
|
needs to be matched(enabled) or not(disabled)."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSServiceEntry 12 }
|
||
|
|
|
||
|
|
alaQoSServiceSourceTcpPortEnd OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..65535)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Source TCP port range end to use for traffic classification.
|
||
|
|
Must be greater than source TCP port range start to indicate a
|
||
|
|
range. When '0', use source TCP port as a single TCP port."
|
||
|
|
::= { alaQoSServiceEntry 13 }
|
||
|
|
|
||
|
|
alaQoSServiceDestinationTcpPort OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..65535)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Destination TCP port range start to use for traffic
|
||
|
|
classification."
|
||
|
|
::= { alaQoSServiceEntry 14 }
|
||
|
|
|
||
|
|
alaQoSServiceDestinationTcpPortStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the destination TCP port range
|
||
|
|
needs to be matched(enabled) or not(disabled)."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSServiceEntry 15 }
|
||
|
|
|
||
|
|
alaQoSServiceDestinationTcpPortEnd OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..65535)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Destination TCP port range end to use for traffic
|
||
|
|
classification. Must be greater than destination TCP port range
|
||
|
|
start to indicate a range. When '0', use destination TCP port as
|
||
|
|
a single TCP port."
|
||
|
|
::= { alaQoSServiceEntry 16 }
|
||
|
|
|
||
|
|
alaQoSServiceSourceUdpPort OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..65535)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Source UDP port range start to use for traffic classification."
|
||
|
|
::= { alaQoSServiceEntry 17 }
|
||
|
|
|
||
|
|
alaQoSServiceSourceUdpPortStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the source UDP port range
|
||
|
|
needs to be matched(enabled) or not(disabled)."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSServiceEntry 18 }
|
||
|
|
|
||
|
|
alaQoSServiceSourceUdpPortEnd OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..65535)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Source UDP port range end to use for traffic classification.
|
||
|
|
Must be greater than source UDP port range start to indicate a
|
||
|
|
range. When '0', use source UDP port as a single UDP port."
|
||
|
|
::= { alaQoSServiceEntry 19 }
|
||
|
|
|
||
|
|
alaQoSServiceDestinationUdpPort OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..65535)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Destination UDP port range start to use for traffic
|
||
|
|
classification."
|
||
|
|
::= { alaQoSServiceEntry 20 }
|
||
|
|
|
||
|
|
alaQoSServiceDestinationUdpPortStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the destination UDP port range
|
||
|
|
needs to be matched(enabled) or not(disabled)."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSServiceEntry 21 }
|
||
|
|
|
||
|
|
alaQoSServiceDestinationUdpPortEnd OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..65535)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Destination UDP port range end to use for traffic
|
||
|
|
classification. Must be greater than destination UDP port range
|
||
|
|
start to indicate a range. When '0', use destination UDP port as
|
||
|
|
a single UDP port."
|
||
|
|
::= { alaQoSServiceEntry 22 }
|
||
|
|
|
||
|
|
|
||
|
|
--
|
||
|
|
-- Definition of service table
|
||
|
|
--
|
||
|
|
|
||
|
|
alaQoSAppliedServiceTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF QoSAppliedServiceEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Table of QoS AppliedService definitions"
|
||
|
|
::= { alaQoSMIBObjects 6 }
|
||
|
|
|
||
|
|
alaQoSAppliedServiceEntry OBJECT-TYPE
|
||
|
|
SYNTAX QoSAppliedServiceEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Definition of QoS AppliedService"
|
||
|
|
INDEX {
|
||
|
|
alaQoSAppliedServiceName
|
||
|
|
}
|
||
|
|
::= { alaQoSAppliedServiceTable 1 }
|
||
|
|
|
||
|
|
QoSAppliedServiceEntry ::=
|
||
|
|
SEQUENCE
|
||
|
|
{
|
||
|
|
alaQoSAppliedServiceName DisplayString,
|
||
|
|
alaQoSAppliedServiceSource INTEGER,
|
||
|
|
alaQoSAppliedServiceProtocol Integer32,
|
||
|
|
alaQoSAppliedServiceSourceIpPort Integer32,
|
||
|
|
alaQoSAppliedServiceSourceIpPortStatus INTEGER,
|
||
|
|
alaQoSAppliedServiceDestinationIpPort Integer32,
|
||
|
|
alaQoSAppliedServiceDestinationIpPortStatus INTEGER,
|
||
|
|
alaQoSAppliedServiceRowStatus RowStatus,
|
||
|
|
alaQoSAppliedServiceSourceIpPortEnd Integer32,
|
||
|
|
alaQoSAppliedServiceDestinationIpPortEnd Integer32,
|
||
|
|
alaQoSAppliedServiceSourceTcpPort Integer32,
|
||
|
|
alaQoSAppliedServiceSourceTcpPortStatus INTEGER,
|
||
|
|
alaQoSAppliedServiceSourceTcpPortEnd Integer32,
|
||
|
|
alaQoSAppliedServiceDestinationTcpPort Integer32,
|
||
|
|
alaQoSAppliedServiceDestinationTcpPortStatus INTEGER,
|
||
|
|
alaQoSAppliedServiceDestinationTcpPortEnd Integer32,
|
||
|
|
alaQoSAppliedServiceSourceUdpPort Integer32,
|
||
|
|
alaQoSAppliedServiceSourceUdpPortStatus INTEGER,
|
||
|
|
alaQoSAppliedServiceSourceUdpPortEnd Integer32,
|
||
|
|
alaQoSAppliedServiceDestinationUdpPort Integer32,
|
||
|
|
alaQoSAppliedServiceDestinationUdpPortStatus INTEGER,
|
||
|
|
alaQoSAppliedServiceDestinationUdpPortEnd Integer32
|
||
|
|
}
|
||
|
|
|
||
|
|
alaQoSAppliedServiceName OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..31))
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Name of the service"
|
||
|
|
::= { alaQoSAppliedServiceEntry 1 }
|
||
|
|
|
||
|
|
alaQoSAppliedServiceSource OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
ldap (1),
|
||
|
|
cli (2),
|
||
|
|
blt (3),
|
||
|
|
api (4),
|
||
|
|
imp (5)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "What entity created the service."
|
||
|
|
::= { alaQoSAppliedServiceEntry 2 }
|
||
|
|
|
||
|
|
alaQoSAppliedServiceProtocol OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..255)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "protocol field for AppliedService"
|
||
|
|
::= { alaQoSAppliedServiceEntry 3 }
|
||
|
|
|
||
|
|
alaQoSAppliedServiceSourceIpPort OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..65535)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Source IP port range start to use for traffic classification."
|
||
|
|
::= { alaQoSAppliedServiceEntry 4 }
|
||
|
|
|
||
|
|
alaQoSAppliedServiceSourceIpPortStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the source IP port range
|
||
|
|
needs to be matched(enabled) or not(disabled)."
|
||
|
|
::= { alaQoSAppliedServiceEntry 5 }
|
||
|
|
|
||
|
|
alaQoSAppliedServiceDestinationIpPort OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..65535)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Destination IP port range start to use for traffic
|
||
|
|
classification."
|
||
|
|
::= { alaQoSAppliedServiceEntry 6 }
|
||
|
|
|
||
|
|
alaQoSAppliedServiceDestinationIpPortStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the destination IP port range
|
||
|
|
needs to be matched(enabled) or not(disabled)."
|
||
|
|
::= { alaQoSAppliedServiceEntry 7 }
|
||
|
|
|
||
|
|
alaQoSAppliedServiceRowStatus OBJECT-TYPE
|
||
|
|
SYNTAX RowStatus
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Used to create/delete services according to the
|
||
|
|
RowStatus convention"
|
||
|
|
::= { alaQoSAppliedServiceEntry 8 }
|
||
|
|
|
||
|
|
alaQoSAppliedServiceSourceIpPortEnd OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..65535)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Source IP port range end to use for traffic classification.
|
||
|
|
Must be greater than source IP port range start to indicate
|
||
|
|
a range. When '0', use source IP port as a single IP port."
|
||
|
|
::= { alaQoSAppliedServiceEntry 9 }
|
||
|
|
|
||
|
|
alaQoSAppliedServiceDestinationIpPortEnd OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..65535)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Destination IP port range end to use for traffic classification.
|
||
|
|
Must be greater than destination IP port range start to indicate
|
||
|
|
a range. When '0', use destination IP port as a single IP port."
|
||
|
|
::= { alaQoSAppliedServiceEntry 10 }
|
||
|
|
|
||
|
|
alaQoSAppliedServiceSourceTcpPort OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..65535)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Source TCP port range start to use for traffic classification."
|
||
|
|
::= { alaQoSAppliedServiceEntry 11 }
|
||
|
|
|
||
|
|
alaQoSAppliedServiceSourceTcpPortStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the source TCP port range
|
||
|
|
needs to be matched(enabled) or not(disabled)."
|
||
|
|
::= { alaQoSAppliedServiceEntry 12 }
|
||
|
|
|
||
|
|
alaQoSAppliedServiceSourceTcpPortEnd OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..65535)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Source TCP port range end to use for traffic classification.
|
||
|
|
Must be greater than source TCP port range start to indicate a
|
||
|
|
range. When '0', use source TCP port as a single TCP port."
|
||
|
|
::= { alaQoSAppliedServiceEntry 13 }
|
||
|
|
|
||
|
|
alaQoSAppliedServiceDestinationTcpPort OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..65535)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Destination TCP port range start to use for traffic
|
||
|
|
classification."
|
||
|
|
::= { alaQoSAppliedServiceEntry 14 }
|
||
|
|
|
||
|
|
alaQoSAppliedServiceDestinationTcpPortStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the destination TCP port range
|
||
|
|
needs to be matched(enabled) or not(disabled)."
|
||
|
|
::= { alaQoSAppliedServiceEntry 15 }
|
||
|
|
|
||
|
|
alaQoSAppliedServiceDestinationTcpPortEnd OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..65535)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Destination TCP port range end to use for traffic
|
||
|
|
classification. Must be greater than destination TCP port range
|
||
|
|
start to indicate a range. When '0', use destination TCP port as
|
||
|
|
a single TCP port."
|
||
|
|
::= { alaQoSAppliedServiceEntry 16 }
|
||
|
|
|
||
|
|
alaQoSAppliedServiceSourceUdpPort OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..65535)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Source UDP port range start to use for traffic classification."
|
||
|
|
::= { alaQoSAppliedServiceEntry 17 }
|
||
|
|
|
||
|
|
alaQoSAppliedServiceSourceUdpPortStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the source UDP port range
|
||
|
|
needs to be matched(enabled) or not(disabled)."
|
||
|
|
::= { alaQoSAppliedServiceEntry 18 }
|
||
|
|
|
||
|
|
alaQoSAppliedServiceSourceUdpPortEnd OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..65535)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Source UDP port range end to use for traffic classification.
|
||
|
|
Must be greater than source UDP port range start to indicate a
|
||
|
|
range. When '0', use source UDP port as a single UDP port."
|
||
|
|
::= { alaQoSAppliedServiceEntry 19 }
|
||
|
|
|
||
|
|
alaQoSAppliedServiceDestinationUdpPort OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..65535)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Destination UDP port range start to use for traffic
|
||
|
|
classification."
|
||
|
|
::= { alaQoSAppliedServiceEntry 20 }
|
||
|
|
|
||
|
|
alaQoSAppliedServiceDestinationUdpPortStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the destination UDP port range
|
||
|
|
needs to be matched(enabled) or not(disabled)."
|
||
|
|
::= { alaQoSAppliedServiceEntry 21 }
|
||
|
|
|
||
|
|
alaQoSAppliedServiceDestinationUdpPortEnd OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..65535)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Destination UDP port range end to use for traffic
|
||
|
|
classification. Must be greater than destination UDP port range
|
||
|
|
start to indicate a range. When '0', use destination UDP port as
|
||
|
|
a single UDP port."
|
||
|
|
::= { alaQoSAppliedServiceEntry 22 }
|
||
|
|
|
||
|
|
|
||
|
|
--
|
||
|
|
-- Definition of service group table
|
||
|
|
--
|
||
|
|
|
||
|
|
alaQoSServiceGroupsTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF QoSServiceGroupsEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Table of QoS ServiceGroups definitions"
|
||
|
|
::= { alaQoSMIBObjects 7 }
|
||
|
|
|
||
|
|
alaQoSServiceGroupsEntry OBJECT-TYPE
|
||
|
|
SYNTAX QoSServiceGroupsEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Definition of QoS ServiceGroups"
|
||
|
|
INDEX {
|
||
|
|
alaQoSServiceGroupsName
|
||
|
|
}
|
||
|
|
::= { alaQoSServiceGroupsTable 1 }
|
||
|
|
|
||
|
|
QoSServiceGroupsEntry ::=
|
||
|
|
SEQUENCE
|
||
|
|
{
|
||
|
|
alaQoSServiceGroupsName DisplayString,
|
||
|
|
alaQoSServiceGroupsSource INTEGER,
|
||
|
|
alaQoSServiceGroupsStatus RowStatus
|
||
|
|
}
|
||
|
|
|
||
|
|
alaQoSServiceGroupsName OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..31))
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Name of service group"
|
||
|
|
::= { alaQoSServiceGroupsEntry 1 }
|
||
|
|
|
||
|
|
alaQoSServiceGroupsSource OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
ldap (1),
|
||
|
|
cli (2),
|
||
|
|
blt (3),
|
||
|
|
api (4),
|
||
|
|
imp (5)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "What entity created the service group."
|
||
|
|
DEFVAL { cli }
|
||
|
|
::= { alaQoSServiceGroupsEntry 2 }
|
||
|
|
|
||
|
|
alaQoSServiceGroupsStatus OBJECT-TYPE
|
||
|
|
SYNTAX RowStatus
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Used to create/delete service groups according to the
|
||
|
|
RowStatus convention"
|
||
|
|
::= { alaQoSServiceGroupsEntry 3 }
|
||
|
|
|
||
|
|
|
||
|
|
--
|
||
|
|
-- Definition of service group table
|
||
|
|
--
|
||
|
|
|
||
|
|
alaQoSAppliedServiceGroupsTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF QoSAppliedServiceGroupsEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Table of QoS AppliedServiceGroups definitions"
|
||
|
|
::= { alaQoSMIBObjects 8 }
|
||
|
|
|
||
|
|
alaQoSAppliedServiceGroupsEntry OBJECT-TYPE
|
||
|
|
SYNTAX QoSAppliedServiceGroupsEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Definition of QoS AppliedServiceGroups"
|
||
|
|
INDEX {
|
||
|
|
alaQoSAppliedServiceGroupsName
|
||
|
|
}
|
||
|
|
::= { alaQoSAppliedServiceGroupsTable 1 }
|
||
|
|
|
||
|
|
QoSAppliedServiceGroupsEntry ::=
|
||
|
|
SEQUENCE
|
||
|
|
{
|
||
|
|
alaQoSAppliedServiceGroupsName DisplayString,
|
||
|
|
alaQoSAppliedServiceGroupsSource INTEGER,
|
||
|
|
alaQoSAppliedServiceGroupsStatus RowStatus
|
||
|
|
}
|
||
|
|
|
||
|
|
alaQoSAppliedServiceGroupsName OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..31))
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Name of service group"
|
||
|
|
::= { alaQoSAppliedServiceGroupsEntry 1 }
|
||
|
|
|
||
|
|
alaQoSAppliedServiceGroupsSource OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
ldap (1),
|
||
|
|
cli (2),
|
||
|
|
blt (3),
|
||
|
|
api (4),
|
||
|
|
imp (5)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "What entity created the service group."
|
||
|
|
::= { alaQoSAppliedServiceGroupsEntry 2 }
|
||
|
|
|
||
|
|
alaQoSAppliedServiceGroupsStatus OBJECT-TYPE
|
||
|
|
SYNTAX RowStatus
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Used to create/delete service groups according to the
|
||
|
|
RowStatus convention"
|
||
|
|
::= { alaQoSAppliedServiceGroupsEntry 3 }
|
||
|
|
|
||
|
|
|
||
|
|
--
|
||
|
|
-- Definition of service group entry table
|
||
|
|
--
|
||
|
|
|
||
|
|
alaQoSServiceGroupTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF QoSServiceGroupEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Table of QoS ServiceGroup definitions"
|
||
|
|
::= { alaQoSMIBObjects 9 }
|
||
|
|
|
||
|
|
alaQoSServiceGroupEntry OBJECT-TYPE
|
||
|
|
SYNTAX QoSServiceGroupEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Definition of QoS ServiceGroup"
|
||
|
|
INDEX {
|
||
|
|
alaQoSServiceGroupsName,
|
||
|
|
alaQoSServiceGroupServiceName
|
||
|
|
}
|
||
|
|
::= { alaQoSServiceGroupTable 1 }
|
||
|
|
|
||
|
|
QoSServiceGroupEntry ::=
|
||
|
|
SEQUENCE
|
||
|
|
{
|
||
|
|
alaQoSServiceGroupServiceName DisplayString,
|
||
|
|
alaQoSServiceGroupStatus RowStatus
|
||
|
|
}
|
||
|
|
|
||
|
|
alaQoSServiceGroupServiceName OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..31))
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Name of service in service group entry"
|
||
|
|
::= { alaQoSServiceGroupEntry 1 }
|
||
|
|
|
||
|
|
alaQoSServiceGroupStatus OBJECT-TYPE
|
||
|
|
SYNTAX RowStatus
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Used to create/delete service group entries according to the
|
||
|
|
RowStatus convention"
|
||
|
|
::= { alaQoSServiceGroupEntry 2 }
|
||
|
|
|
||
|
|
|
||
|
|
--
|
||
|
|
-- Definition of service group entry table
|
||
|
|
--
|
||
|
|
|
||
|
|
alaQoSAppliedServiceGroupTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF QoSAppliedServiceGroupEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Table of QoS AppliedServiceGroup definitions"
|
||
|
|
::= { alaQoSMIBObjects 10 }
|
||
|
|
|
||
|
|
alaQoSAppliedServiceGroupEntry OBJECT-TYPE
|
||
|
|
SYNTAX QoSAppliedServiceGroupEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Definition of QoS AppliedServiceGroup"
|
||
|
|
INDEX {
|
||
|
|
alaQoSAppliedServiceGroupsName,
|
||
|
|
alaQoSAppliedServiceGroupServiceName
|
||
|
|
}
|
||
|
|
::= { alaQoSAppliedServiceGroupTable 1 }
|
||
|
|
|
||
|
|
QoSAppliedServiceGroupEntry ::=
|
||
|
|
SEQUENCE
|
||
|
|
{
|
||
|
|
alaQoSAppliedServiceGroupServiceName DisplayString,
|
||
|
|
alaQoSAppliedServiceGroupStatus RowStatus
|
||
|
|
}
|
||
|
|
|
||
|
|
alaQoSAppliedServiceGroupServiceName OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..31))
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Name of service in service group entry"
|
||
|
|
::= { alaQoSAppliedServiceGroupEntry 1 }
|
||
|
|
|
||
|
|
alaQoSAppliedServiceGroupStatus OBJECT-TYPE
|
||
|
|
SYNTAX RowStatus
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Used to create/delete service group entries according to the
|
||
|
|
RowStatus convention"
|
||
|
|
::= { alaQoSAppliedServiceGroupEntry 2 }
|
||
|
|
|
||
|
|
|
||
|
|
--
|
||
|
|
-- Definition of network group table
|
||
|
|
--
|
||
|
|
|
||
|
|
alaQoSNetworkGroupsTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF QoSNetworkGroupsEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Table of QoS NetworkGroups definitions"
|
||
|
|
::= { alaQoSMIBObjects 11 }
|
||
|
|
|
||
|
|
alaQoSNetworkGroupsEntry OBJECT-TYPE
|
||
|
|
SYNTAX QoSNetworkGroupsEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Definition of QoS NetworkGroups"
|
||
|
|
INDEX {
|
||
|
|
alaQoSNetworkGroupsName
|
||
|
|
}
|
||
|
|
::= { alaQoSNetworkGroupsTable 1 }
|
||
|
|
|
||
|
|
QoSNetworkGroupsEntry ::=
|
||
|
|
SEQUENCE
|
||
|
|
{
|
||
|
|
alaQoSNetworkGroupsName DisplayString,
|
||
|
|
alaQoSNetworkGroupsSource INTEGER,
|
||
|
|
alaQoSNetworkGroupsStatus RowStatus
|
||
|
|
}
|
||
|
|
|
||
|
|
alaQoSNetworkGroupsName OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..31))
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Name of network group"
|
||
|
|
::= { alaQoSNetworkGroupsEntry 1 }
|
||
|
|
|
||
|
|
alaQoSNetworkGroupsSource OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
ldap (1),
|
||
|
|
cli (2),
|
||
|
|
blt (3),
|
||
|
|
api (4),
|
||
|
|
imp (5)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "What entity created the network group."
|
||
|
|
DEFVAL { cli }
|
||
|
|
::= { alaQoSNetworkGroupsEntry 2 }
|
||
|
|
|
||
|
|
alaQoSNetworkGroupsStatus OBJECT-TYPE
|
||
|
|
SYNTAX RowStatus
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Used to create/delete network groups according to the
|
||
|
|
RowStatus convention"
|
||
|
|
::= { alaQoSNetworkGroupsEntry 3 }
|
||
|
|
|
||
|
|
|
||
|
|
--
|
||
|
|
-- Definition of network group table
|
||
|
|
--
|
||
|
|
|
||
|
|
alaQoSAppliedNetworkGroupsTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF QoSAppliedNetworkGroupsEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Table of QoS AppliedNetworkGroups definitions"
|
||
|
|
::= { alaQoSMIBObjects 12 }
|
||
|
|
|
||
|
|
alaQoSAppliedNetworkGroupsEntry OBJECT-TYPE
|
||
|
|
SYNTAX QoSAppliedNetworkGroupsEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Definition of QoS AppliedNetworkGroups"
|
||
|
|
INDEX {
|
||
|
|
alaQoSAppliedNetworkGroupsName
|
||
|
|
}
|
||
|
|
::= { alaQoSAppliedNetworkGroupsTable 1 }
|
||
|
|
|
||
|
|
QoSAppliedNetworkGroupsEntry ::=
|
||
|
|
SEQUENCE
|
||
|
|
{
|
||
|
|
alaQoSAppliedNetworkGroupsName DisplayString,
|
||
|
|
alaQoSAppliedNetworkGroupsSource INTEGER,
|
||
|
|
alaQoSAppliedNetworkGroupsStatus RowStatus
|
||
|
|
}
|
||
|
|
|
||
|
|
alaQoSAppliedNetworkGroupsName OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..31))
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Name of network group"
|
||
|
|
::= { alaQoSAppliedNetworkGroupsEntry 1 }
|
||
|
|
|
||
|
|
alaQoSAppliedNetworkGroupsSource OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
ldap (1),
|
||
|
|
cli (2),
|
||
|
|
blt (3),
|
||
|
|
api (4),
|
||
|
|
imp (5)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "What entity created the network group."
|
||
|
|
::= { alaQoSAppliedNetworkGroupsEntry 2 }
|
||
|
|
|
||
|
|
alaQoSAppliedNetworkGroupsStatus OBJECT-TYPE
|
||
|
|
SYNTAX RowStatus
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Used to create/delete network groups according to the
|
||
|
|
RowStatus convention"
|
||
|
|
::= { alaQoSAppliedNetworkGroupsEntry 3 }
|
||
|
|
|
||
|
|
|
||
|
|
--
|
||
|
|
-- Definition of network group entry table
|
||
|
|
--
|
||
|
|
|
||
|
|
alaQoSNetworkGroupTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF QoSNetworkGroupEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Table of QoS NetworkGroup definitions"
|
||
|
|
::= { alaQoSMIBObjects 13 }
|
||
|
|
|
||
|
|
alaQoSNetworkGroupEntry OBJECT-TYPE
|
||
|
|
SYNTAX QoSNetworkGroupEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Definition of QoS NetworkGroup"
|
||
|
|
INDEX {
|
||
|
|
alaQoSNetworkGroupsName,
|
||
|
|
alaQoSNetworkGroupIpAddr,
|
||
|
|
alaQoSNetworkGroupIpMask
|
||
|
|
}
|
||
|
|
::= { alaQoSNetworkGroupTable 1 }
|
||
|
|
|
||
|
|
QoSNetworkGroupEntry ::=
|
||
|
|
SEQUENCE
|
||
|
|
{
|
||
|
|
alaQoSNetworkGroupIpAddr IpAddress,
|
||
|
|
alaQoSNetworkGroupIpMask IpAddress,
|
||
|
|
alaQoSNetworkGroupStatus RowStatus
|
||
|
|
}
|
||
|
|
|
||
|
|
alaQoSNetworkGroupIpAddr OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "IP address for network group entry."
|
||
|
|
::= { alaQoSNetworkGroupEntry 1 }
|
||
|
|
|
||
|
|
alaQoSNetworkGroupIpMask OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "IP mask for network group entry."
|
||
|
|
::= { alaQoSNetworkGroupEntry 2 }
|
||
|
|
|
||
|
|
alaQoSNetworkGroupStatus OBJECT-TYPE
|
||
|
|
SYNTAX RowStatus
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Used to create/delete network group entries according to the
|
||
|
|
RowStatus convention"
|
||
|
|
::= { alaQoSNetworkGroupEntry 3 }
|
||
|
|
|
||
|
|
|
||
|
|
--
|
||
|
|
-- Definition of network group entry table
|
||
|
|
--
|
||
|
|
|
||
|
|
alaQoSAppliedNetworkGroupTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF QoSAppliedNetworkGroupEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Table of QoS AppliedNetworkGroup definitions"
|
||
|
|
::= { alaQoSMIBObjects 14 }
|
||
|
|
|
||
|
|
alaQoSAppliedNetworkGroupEntry OBJECT-TYPE
|
||
|
|
SYNTAX QoSAppliedNetworkGroupEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Definition of QoS AppliedNetworkGroup"
|
||
|
|
INDEX {
|
||
|
|
alaQoSAppliedNetworkGroupsName,
|
||
|
|
alaQoSAppliedNetworkGroupIpAddr,
|
||
|
|
alaQoSAppliedNetworkGroupIpMask
|
||
|
|
}
|
||
|
|
::= { alaQoSAppliedNetworkGroupTable 1 }
|
||
|
|
|
||
|
|
QoSAppliedNetworkGroupEntry ::=
|
||
|
|
SEQUENCE
|
||
|
|
{
|
||
|
|
alaQoSAppliedNetworkGroupIpAddr IpAddress,
|
||
|
|
alaQoSAppliedNetworkGroupIpMask IpAddress,
|
||
|
|
alaQoSAppliedNetworkGroupStatus RowStatus
|
||
|
|
}
|
||
|
|
|
||
|
|
alaQoSAppliedNetworkGroupIpAddr OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "IP address for network group entry."
|
||
|
|
::= { alaQoSAppliedNetworkGroupEntry 1 }
|
||
|
|
|
||
|
|
alaQoSAppliedNetworkGroupIpMask OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "IP mask for network group entry."
|
||
|
|
::= { alaQoSAppliedNetworkGroupEntry 2 }
|
||
|
|
|
||
|
|
alaQoSAppliedNetworkGroupStatus OBJECT-TYPE
|
||
|
|
SYNTAX RowStatus
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Used to create/delete network group entries according to the
|
||
|
|
RowStatus convention"
|
||
|
|
::= { alaQoSAppliedNetworkGroupEntry 3 }
|
||
|
|
|
||
|
|
|
||
|
|
--
|
||
|
|
-- Definition of mac group table
|
||
|
|
--
|
||
|
|
|
||
|
|
alaQoSMACGroupsTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF QoSMACGroupsEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Table of QoS MACGroups definitions"
|
||
|
|
::= { alaQoSMIBObjects 15 }
|
||
|
|
|
||
|
|
alaQoSMACGroupsEntry OBJECT-TYPE
|
||
|
|
SYNTAX QoSMACGroupsEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Definition of QoS MACGroups"
|
||
|
|
INDEX {
|
||
|
|
alaQoSMACGroupsName
|
||
|
|
}
|
||
|
|
::= { alaQoSMACGroupsTable 1 }
|
||
|
|
|
||
|
|
QoSMACGroupsEntry ::=
|
||
|
|
SEQUENCE
|
||
|
|
{
|
||
|
|
alaQoSMACGroupsName DisplayString,
|
||
|
|
alaQoSMACGroupsSource INTEGER,
|
||
|
|
alaQoSMACGroupsStatus RowStatus
|
||
|
|
}
|
||
|
|
|
||
|
|
alaQoSMACGroupsName OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..31))
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Name of MAC group"
|
||
|
|
::= { alaQoSMACGroupsEntry 1 }
|
||
|
|
|
||
|
|
alaQoSMACGroupsSource OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
ldap (1),
|
||
|
|
cli (2),
|
||
|
|
blt (3),
|
||
|
|
api (4),
|
||
|
|
imp (5)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "What entity created the MAC group."
|
||
|
|
DEFVAL { cli }
|
||
|
|
::= { alaQoSMACGroupsEntry 2 }
|
||
|
|
|
||
|
|
alaQoSMACGroupsStatus OBJECT-TYPE
|
||
|
|
SYNTAX RowStatus
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Used to create/delete MAC groups according to the
|
||
|
|
RowStatus convention"
|
||
|
|
::= { alaQoSMACGroupsEntry 3 }
|
||
|
|
|
||
|
|
|
||
|
|
--
|
||
|
|
-- Definition of mac group table
|
||
|
|
--
|
||
|
|
|
||
|
|
alaQoSAppliedMACGroupsTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF QoSAppliedMACGroupsEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Table of QoS AppliedMACGroups definitions"
|
||
|
|
::= { alaQoSMIBObjects 16 }
|
||
|
|
|
||
|
|
alaQoSAppliedMACGroupsEntry OBJECT-TYPE
|
||
|
|
SYNTAX QoSAppliedMACGroupsEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Definition of QoS AppliedMACGroups"
|
||
|
|
INDEX {
|
||
|
|
alaQoSAppliedMACGroupsName
|
||
|
|
}
|
||
|
|
::= { alaQoSAppliedMACGroupsTable 1 }
|
||
|
|
|
||
|
|
QoSAppliedMACGroupsEntry ::=
|
||
|
|
SEQUENCE
|
||
|
|
{
|
||
|
|
alaQoSAppliedMACGroupsName DisplayString,
|
||
|
|
alaQoSAppliedMACGroupsSource INTEGER,
|
||
|
|
alaQoSAppliedMACGroupsStatus RowStatus
|
||
|
|
}
|
||
|
|
|
||
|
|
alaQoSAppliedMACGroupsName OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..31))
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Name of MAC group"
|
||
|
|
::= { alaQoSAppliedMACGroupsEntry 1 }
|
||
|
|
|
||
|
|
alaQoSAppliedMACGroupsSource OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
ldap (1),
|
||
|
|
cli (2),
|
||
|
|
blt (3),
|
||
|
|
api (4),
|
||
|
|
imp (5)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "What entity created the MAC group."
|
||
|
|
::= { alaQoSAppliedMACGroupsEntry 2 }
|
||
|
|
|
||
|
|
alaQoSAppliedMACGroupsStatus OBJECT-TYPE
|
||
|
|
SYNTAX RowStatus
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Used to create/delete MAC groups according to the
|
||
|
|
RowStatus convention"
|
||
|
|
::= { alaQoSAppliedMACGroupsEntry 3 }
|
||
|
|
|
||
|
|
|
||
|
|
--
|
||
|
|
-- Definition of MAC group entry table
|
||
|
|
--
|
||
|
|
|
||
|
|
alaQoSMACGroupTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF QoSMACGroupEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Table of QoS MACGroup definitions"
|
||
|
|
::= { alaQoSMIBObjects 17 }
|
||
|
|
|
||
|
|
alaQoSMACGroupEntry OBJECT-TYPE
|
||
|
|
SYNTAX QoSMACGroupEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Definition of QoS MACGroup"
|
||
|
|
INDEX {
|
||
|
|
alaQoSMACGroupsName,
|
||
|
|
alaQoSMACGroupMacAddr,
|
||
|
|
alaQoSMACGroupMacMask
|
||
|
|
}
|
||
|
|
::= { alaQoSMACGroupTable 1 }
|
||
|
|
|
||
|
|
QoSMACGroupEntry ::=
|
||
|
|
SEQUENCE
|
||
|
|
{
|
||
|
|
alaQoSMACGroupMacAddr MacAddress,
|
||
|
|
alaQoSMACGroupMacMask MacAddress,
|
||
|
|
alaQoSMACGroupStatus RowStatus
|
||
|
|
}
|
||
|
|
|
||
|
|
alaQoSMACGroupMacAddr OBJECT-TYPE
|
||
|
|
SYNTAX MacAddress
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "MAC address for MAC group entry"
|
||
|
|
::= { alaQoSMACGroupEntry 1 }
|
||
|
|
|
||
|
|
alaQoSMACGroupMacMask OBJECT-TYPE
|
||
|
|
SYNTAX MacAddress
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "MAC mask for MAC group entry"
|
||
|
|
::= { alaQoSMACGroupEntry 2 }
|
||
|
|
|
||
|
|
alaQoSMACGroupStatus OBJECT-TYPE
|
||
|
|
SYNTAX RowStatus
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Used to create/delete MAC group entries according to the
|
||
|
|
RowStatus convention"
|
||
|
|
::= { alaQoSMACGroupEntry 3 }
|
||
|
|
|
||
|
|
|
||
|
|
--
|
||
|
|
-- Definition of MAC group entry table
|
||
|
|
--
|
||
|
|
|
||
|
|
alaQoSAppliedMACGroupTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF QoSAppliedMACGroupEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Table of QoS AppliedMACGroup definitions"
|
||
|
|
::= { alaQoSMIBObjects 18 }
|
||
|
|
|
||
|
|
alaQoSAppliedMACGroupEntry OBJECT-TYPE
|
||
|
|
SYNTAX QoSAppliedMACGroupEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Definition of QoS AppliedMACGroup"
|
||
|
|
INDEX {
|
||
|
|
alaQoSAppliedMACGroupsName,
|
||
|
|
alaQoSAppliedMACGroupMacAddr,
|
||
|
|
alaQoSAppliedMACGroupMacMask
|
||
|
|
}
|
||
|
|
::= { alaQoSAppliedMACGroupTable 1 }
|
||
|
|
|
||
|
|
QoSAppliedMACGroupEntry ::=
|
||
|
|
SEQUENCE
|
||
|
|
{
|
||
|
|
alaQoSAppliedMACGroupMacAddr MacAddress,
|
||
|
|
alaQoSAppliedMACGroupMacMask MacAddress,
|
||
|
|
alaQoSAppliedMACGroupStatus RowStatus
|
||
|
|
}
|
||
|
|
|
||
|
|
alaQoSAppliedMACGroupMacAddr OBJECT-TYPE
|
||
|
|
SYNTAX MacAddress
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "MAC address for MAC group entry"
|
||
|
|
::= { alaQoSAppliedMACGroupEntry 1 }
|
||
|
|
|
||
|
|
alaQoSAppliedMACGroupMacMask OBJECT-TYPE
|
||
|
|
SYNTAX MacAddress
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "MAC mask for MAC group entry"
|
||
|
|
::= { alaQoSAppliedMACGroupEntry 2 }
|
||
|
|
|
||
|
|
alaQoSAppliedMACGroupStatus OBJECT-TYPE
|
||
|
|
SYNTAX RowStatus
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Used to create/delete MAC group entries according to the
|
||
|
|
RowStatus convention"
|
||
|
|
::= { alaQoSAppliedMACGroupEntry 3 }
|
||
|
|
|
||
|
|
|
||
|
|
--
|
||
|
|
-- Definition of port group table
|
||
|
|
--
|
||
|
|
|
||
|
|
alaQoSPortGroupsTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF QoSPortGroupsEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Table of QoS PortGroups definitions"
|
||
|
|
::= { alaQoSMIBObjects 19 }
|
||
|
|
|
||
|
|
alaQoSPortGroupsEntry OBJECT-TYPE
|
||
|
|
SYNTAX QoSPortGroupsEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Definition of QoS PortGroups"
|
||
|
|
INDEX {
|
||
|
|
alaQoSPortGroupsName
|
||
|
|
}
|
||
|
|
::= { alaQoSPortGroupsTable 1 }
|
||
|
|
|
||
|
|
QoSPortGroupsEntry ::=
|
||
|
|
SEQUENCE
|
||
|
|
{
|
||
|
|
alaQoSPortGroupsName DisplayString,
|
||
|
|
alaQoSPortGroupsSource INTEGER,
|
||
|
|
alaQoSPortGroupsStatus RowStatus
|
||
|
|
}
|
||
|
|
|
||
|
|
alaQoSPortGroupsName OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..31))
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Name of port group"
|
||
|
|
::= { alaQoSPortGroupsEntry 1 }
|
||
|
|
|
||
|
|
alaQoSPortGroupsSource OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
ldap (1),
|
||
|
|
cli (2),
|
||
|
|
blt (3),
|
||
|
|
api (4),
|
||
|
|
imp (5)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "What entity created the port group."
|
||
|
|
DEFVAL { cli }
|
||
|
|
::= { alaQoSPortGroupsEntry 2 }
|
||
|
|
|
||
|
|
alaQoSPortGroupsStatus OBJECT-TYPE
|
||
|
|
SYNTAX RowStatus
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Used to create/delete port groups according to the
|
||
|
|
RowStatus convention"
|
||
|
|
::= { alaQoSPortGroupsEntry 3 }
|
||
|
|
|
||
|
|
|
||
|
|
--
|
||
|
|
-- Definition of port group table
|
||
|
|
--
|
||
|
|
|
||
|
|
alaQoSAppliedPortGroupsTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF QoSAppliedPortGroupsEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Table of QoS AppliedPortGroups definitions"
|
||
|
|
::= { alaQoSMIBObjects 20 }
|
||
|
|
|
||
|
|
alaQoSAppliedPortGroupsEntry OBJECT-TYPE
|
||
|
|
SYNTAX QoSAppliedPortGroupsEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Definition of QoS AppliedPortGroups"
|
||
|
|
INDEX {
|
||
|
|
alaQoSAppliedPortGroupsName
|
||
|
|
}
|
||
|
|
::= { alaQoSAppliedPortGroupsTable 1 }
|
||
|
|
|
||
|
|
QoSAppliedPortGroupsEntry ::=
|
||
|
|
SEQUENCE
|
||
|
|
{
|
||
|
|
alaQoSAppliedPortGroupsName DisplayString,
|
||
|
|
alaQoSAppliedPortGroupsSource INTEGER,
|
||
|
|
alaQoSAppliedPortGroupsStatus RowStatus
|
||
|
|
}
|
||
|
|
|
||
|
|
alaQoSAppliedPortGroupsName OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..31))
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Name of port group"
|
||
|
|
::= { alaQoSAppliedPortGroupsEntry 1 }
|
||
|
|
|
||
|
|
alaQoSAppliedPortGroupsSource OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
ldap (1),
|
||
|
|
cli (2),
|
||
|
|
blt (3),
|
||
|
|
api (4),
|
||
|
|
imp (5)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "What entity created the port group."
|
||
|
|
::= { alaQoSAppliedPortGroupsEntry 2 }
|
||
|
|
|
||
|
|
alaQoSAppliedPortGroupsStatus OBJECT-TYPE
|
||
|
|
SYNTAX RowStatus
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Used to create/delete port groups according to the
|
||
|
|
RowStatus convention"
|
||
|
|
::= { alaQoSAppliedPortGroupsEntry 3 }
|
||
|
|
|
||
|
|
|
||
|
|
--
|
||
|
|
-- Definition of port group entry table
|
||
|
|
--
|
||
|
|
|
||
|
|
alaQoSPortGroupTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF QoSPortGroupEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Table of QoS PortGroup definitions"
|
||
|
|
::= { alaQoSMIBObjects 21 }
|
||
|
|
|
||
|
|
alaQoSPortGroupEntry OBJECT-TYPE
|
||
|
|
SYNTAX QoSPortGroupEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Definition of QoS PortGroup"
|
||
|
|
INDEX {
|
||
|
|
alaQoSPortGroupsName,
|
||
|
|
alaQoSPortGroupSlot,
|
||
|
|
alaQoSPortGroupPort,
|
||
|
|
alaQoSPortGroupPortEnd
|
||
|
|
}
|
||
|
|
::= { alaQoSPortGroupTable 1 }
|
||
|
|
|
||
|
|
QoSPortGroupEntry ::=
|
||
|
|
SEQUENCE
|
||
|
|
{
|
||
|
|
alaQoSPortGroupSlot Integer32,
|
||
|
|
alaQoSPortGroupPort Integer32,
|
||
|
|
alaQoSPortGroupStatus RowStatus,
|
||
|
|
alaQoSPortGroupPortEnd Integer32
|
||
|
|
}
|
||
|
|
|
||
|
|
alaQoSPortGroupSlot OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..16)
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Physical slot for port group entry"
|
||
|
|
::= { alaQoSPortGroupEntry 1 }
|
||
|
|
|
||
|
|
alaQoSPortGroupPort OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..52)
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Physical port range start for port group entry"
|
||
|
|
::= { alaQoSPortGroupEntry 2 }
|
||
|
|
|
||
|
|
alaQoSPortGroupStatus OBJECT-TYPE
|
||
|
|
SYNTAX RowStatus
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Used to create/delete port group entries according to the
|
||
|
|
RowStatus convention"
|
||
|
|
::= { alaQoSPortGroupEntry 3 }
|
||
|
|
|
||
|
|
alaQoSPortGroupPortEnd OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..52)
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Physical port range end for port group entry
|
||
|
|
Must be greater than port range start to indicate a range.
|
||
|
|
When '1', use port as a single port."
|
||
|
|
::= { alaQoSPortGroupEntry 4 }
|
||
|
|
|
||
|
|
|
||
|
|
--
|
||
|
|
-- Definition of port group entry table
|
||
|
|
--
|
||
|
|
|
||
|
|
alaQoSAppliedPortGroupTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF QoSAppliedPortGroupEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Table of QoS AppliedPortGroup definitions"
|
||
|
|
::= { alaQoSMIBObjects 22 }
|
||
|
|
|
||
|
|
alaQoSAppliedPortGroupEntry OBJECT-TYPE
|
||
|
|
SYNTAX QoSAppliedPortGroupEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Definition of QoS AppliedPortGroup"
|
||
|
|
INDEX {
|
||
|
|
alaQoSAppliedPortGroupsName,
|
||
|
|
alaQoSAppliedPortGroupSlot,
|
||
|
|
alaQoSAppliedPortGroupPort,
|
||
|
|
alaQoSAppliedPortGroupPortEnd
|
||
|
|
}
|
||
|
|
::= { alaQoSAppliedPortGroupTable 1 }
|
||
|
|
|
||
|
|
QoSAppliedPortGroupEntry ::=
|
||
|
|
SEQUENCE
|
||
|
|
{
|
||
|
|
alaQoSAppliedPortGroupSlot Integer32,
|
||
|
|
alaQoSAppliedPortGroupPort Integer32,
|
||
|
|
alaQoSAppliedPortGroupStatus RowStatus,
|
||
|
|
alaQoSAppliedPortGroupPortEnd Integer32
|
||
|
|
}
|
||
|
|
|
||
|
|
alaQoSAppliedPortGroupSlot OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..16)
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Physical slot for port group entry"
|
||
|
|
::= { alaQoSAppliedPortGroupEntry 1 }
|
||
|
|
|
||
|
|
alaQoSAppliedPortGroupPort OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..52)
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Physical port range start for port group entry"
|
||
|
|
::= { alaQoSAppliedPortGroupEntry 2 }
|
||
|
|
|
||
|
|
alaQoSAppliedPortGroupStatus OBJECT-TYPE
|
||
|
|
SYNTAX RowStatus
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Used to create/delete port group entries according to the
|
||
|
|
RowStatus convention"
|
||
|
|
::= { alaQoSAppliedPortGroupEntry 3 }
|
||
|
|
|
||
|
|
alaQoSAppliedPortGroupPortEnd OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..52)
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Physical port range end for port group entry
|
||
|
|
Must be greater than port range start to indicate a range.
|
||
|
|
When '1', use port as a single port."
|
||
|
|
::= { alaQoSAppliedPortGroupEntry 4 }
|
||
|
|
|
||
|
|
|
||
|
|
--
|
||
|
|
-- Definition of map group table
|
||
|
|
--
|
||
|
|
|
||
|
|
alaQoSMapGroupsTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF QoSMapGroupsEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Table of QoS MapGroups definitions"
|
||
|
|
::= { alaQoSMIBObjects 23 }
|
||
|
|
|
||
|
|
alaQoSMapGroupsEntry OBJECT-TYPE
|
||
|
|
SYNTAX QoSMapGroupsEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Definition of QoS MapGroups"
|
||
|
|
INDEX {
|
||
|
|
alaQoSMapGroupsName
|
||
|
|
}
|
||
|
|
::= { alaQoSMapGroupsTable 1 }
|
||
|
|
|
||
|
|
QoSMapGroupsEntry ::=
|
||
|
|
SEQUENCE
|
||
|
|
{
|
||
|
|
alaQoSMapGroupsName DisplayString,
|
||
|
|
alaQoSMapGroupsSource INTEGER,
|
||
|
|
alaQoSMapGroupsStatus RowStatus
|
||
|
|
}
|
||
|
|
|
||
|
|
alaQoSMapGroupsName OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..31))
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Name of map group"
|
||
|
|
::= { alaQoSMapGroupsEntry 1 }
|
||
|
|
|
||
|
|
alaQoSMapGroupsSource OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
ldap (1),
|
||
|
|
cli (2),
|
||
|
|
blt (3),
|
||
|
|
api (4),
|
||
|
|
imp (5)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "What entity created the map group."
|
||
|
|
DEFVAL { cli }
|
||
|
|
::= { alaQoSMapGroupsEntry 2 }
|
||
|
|
|
||
|
|
alaQoSMapGroupsStatus OBJECT-TYPE
|
||
|
|
SYNTAX RowStatus
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Used to create/delete map groups according to the
|
||
|
|
RowStatus convention"
|
||
|
|
::= { alaQoSMapGroupsEntry 3 }
|
||
|
|
|
||
|
|
|
||
|
|
--
|
||
|
|
-- Definition of map group table
|
||
|
|
--
|
||
|
|
|
||
|
|
alaQoSAppliedMapGroupsTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF QoSAppliedMapGroupsEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Table of QoS AppliedMapGroups definitions"
|
||
|
|
::= { alaQoSMIBObjects 24 }
|
||
|
|
|
||
|
|
alaQoSAppliedMapGroupsEntry OBJECT-TYPE
|
||
|
|
SYNTAX QoSAppliedMapGroupsEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Definition of QoS AppliedMapGroups"
|
||
|
|
INDEX {
|
||
|
|
alaQoSAppliedMapGroupsName
|
||
|
|
}
|
||
|
|
::= { alaQoSAppliedMapGroupsTable 1 }
|
||
|
|
|
||
|
|
QoSAppliedMapGroupsEntry ::=
|
||
|
|
SEQUENCE
|
||
|
|
{
|
||
|
|
alaQoSAppliedMapGroupsName DisplayString,
|
||
|
|
alaQoSAppliedMapGroupsSource INTEGER,
|
||
|
|
alaQoSAppliedMapGroupsStatus RowStatus
|
||
|
|
}
|
||
|
|
|
||
|
|
alaQoSAppliedMapGroupsName OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..31))
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Name of map group"
|
||
|
|
::= { alaQoSAppliedMapGroupsEntry 1 }
|
||
|
|
|
||
|
|
alaQoSAppliedMapGroupsSource OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
ldap (1),
|
||
|
|
cli (2),
|
||
|
|
blt (3),
|
||
|
|
api (4),
|
||
|
|
imp (5)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "What entity created the map group."
|
||
|
|
::= { alaQoSAppliedMapGroupsEntry 2 }
|
||
|
|
|
||
|
|
alaQoSAppliedMapGroupsStatus OBJECT-TYPE
|
||
|
|
SYNTAX RowStatus
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Used to create/delete map groups according to the
|
||
|
|
RowStatus convention"
|
||
|
|
::= { alaQoSAppliedMapGroupsEntry 3 }
|
||
|
|
|
||
|
|
|
||
|
|
--
|
||
|
|
-- Definition of map group entry table
|
||
|
|
--
|
||
|
|
|
||
|
|
alaQoSMapGroupTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF QoSMapGroupEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Table of QoS MapGroup definitions"
|
||
|
|
::= { alaQoSMIBObjects 25 }
|
||
|
|
|
||
|
|
alaQoSMapGroupEntry OBJECT-TYPE
|
||
|
|
SYNTAX QoSMapGroupEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Definition of QoS MapGroup"
|
||
|
|
INDEX {
|
||
|
|
alaQoSMapGroupsName,
|
||
|
|
alaQoSMapGroupKey,
|
||
|
|
alaQoSMapGroupKeyEnd,
|
||
|
|
alaQoSMapGroupValue
|
||
|
|
}
|
||
|
|
::= { alaQoSMapGroupTable 1 }
|
||
|
|
|
||
|
|
QoSMapGroupEntry ::=
|
||
|
|
SEQUENCE
|
||
|
|
{
|
||
|
|
alaQoSMapGroupKey Integer32,
|
||
|
|
alaQoSMapGroupKeyEnd Integer32,
|
||
|
|
alaQoSMapGroupValue Integer32,
|
||
|
|
alaQoSMapGroupStatus RowStatus
|
||
|
|
}
|
||
|
|
|
||
|
|
alaQoSMapGroupKey OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..63)
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Key range start of map group entry."
|
||
|
|
::= { alaQoSMapGroupEntry 1 }
|
||
|
|
|
||
|
|
alaQoSMapGroupKeyEnd OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..63)
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Key range end for map group entries. Key range end
|
||
|
|
must be greater than key range start to indicate a range.
|
||
|
|
When '0', use key range start as a single key."
|
||
|
|
::= { alaQoSMapGroupEntry 2 }
|
||
|
|
|
||
|
|
alaQoSMapGroupValue OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..63)
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Value for map group entries. Value to stamp on traffic when
|
||
|
|
keys in the proper range are seen."
|
||
|
|
::= { alaQoSMapGroupEntry 3 }
|
||
|
|
|
||
|
|
alaQoSMapGroupStatus OBJECT-TYPE
|
||
|
|
SYNTAX RowStatus
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Used to create/delete map group entries according to the
|
||
|
|
RowStatus convention"
|
||
|
|
::= { alaQoSMapGroupEntry 4 }
|
||
|
|
|
||
|
|
|
||
|
|
--
|
||
|
|
-- Definition of map group entry table
|
||
|
|
--
|
||
|
|
|
||
|
|
alaQoSAppliedMapGroupTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF QoSAppliedMapGroupEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Table of QoS AppliedMapGroup definitions"
|
||
|
|
::= { alaQoSMIBObjects 26 }
|
||
|
|
|
||
|
|
alaQoSAppliedMapGroupEntry OBJECT-TYPE
|
||
|
|
SYNTAX QoSAppliedMapGroupEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Definition of QoS AppliedMapGroup"
|
||
|
|
INDEX {
|
||
|
|
alaQoSAppliedMapGroupsName,
|
||
|
|
alaQoSAppliedMapGroupKey,
|
||
|
|
alaQoSAppliedMapGroupKeyEnd,
|
||
|
|
alaQoSAppliedMapGroupValue
|
||
|
|
}
|
||
|
|
::= { alaQoSAppliedMapGroupTable 1 }
|
||
|
|
|
||
|
|
QoSAppliedMapGroupEntry ::=
|
||
|
|
SEQUENCE
|
||
|
|
{
|
||
|
|
alaQoSAppliedMapGroupKey Integer32,
|
||
|
|
alaQoSAppliedMapGroupKeyEnd Integer32,
|
||
|
|
alaQoSAppliedMapGroupValue Integer32,
|
||
|
|
alaQoSAppliedMapGroupStatus RowStatus
|
||
|
|
}
|
||
|
|
|
||
|
|
alaQoSAppliedMapGroupKey OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..63)
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Key range start of map group entry."
|
||
|
|
::= { alaQoSAppliedMapGroupEntry 1 }
|
||
|
|
|
||
|
|
alaQoSAppliedMapGroupKeyEnd OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..63)
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Key range end for map group entries. Key range end
|
||
|
|
must be greater than key range start to indicate a range.
|
||
|
|
When '0', use key range start as a single key."
|
||
|
|
::= { alaQoSAppliedMapGroupEntry 2 }
|
||
|
|
|
||
|
|
alaQoSAppliedMapGroupValue OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..63)
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Value for map group entries. Value to stamp on traffic when
|
||
|
|
keys in the proper range are seen."
|
||
|
|
::= { alaQoSAppliedMapGroupEntry 3 }
|
||
|
|
|
||
|
|
alaQoSAppliedMapGroupStatus OBJECT-TYPE
|
||
|
|
SYNTAX RowStatus
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Used to create/delete map group entries according to the
|
||
|
|
RowStatus convention"
|
||
|
|
::= { alaQoSAppliedMapGroupEntry 4 }
|
||
|
|
|
||
|
|
|
||
|
|
--
|
||
|
|
-- Definition of action table
|
||
|
|
--
|
||
|
|
|
||
|
|
alaQoSActionTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF QoSActionEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Table of QoS Action definitions"
|
||
|
|
::= { alaQoSMIBObjects 27 }
|
||
|
|
|
||
|
|
alaQoSActionEntry OBJECT-TYPE
|
||
|
|
SYNTAX QoSActionEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Definition of QoS Action"
|
||
|
|
INDEX {
|
||
|
|
alaQoSActionName
|
||
|
|
}
|
||
|
|
::= { alaQoSActionTable 1 }
|
||
|
|
|
||
|
|
QoSActionEntry ::=
|
||
|
|
SEQUENCE
|
||
|
|
{
|
||
|
|
alaQoSActionName DisplayString,
|
||
|
|
alaQoSActionSource INTEGER,
|
||
|
|
alaQoSActionDisposition INTEGER,
|
||
|
|
alaQoSActionDropAlgorithm INTEGER,
|
||
|
|
alaQoSActionWredMaximumThreshold Integer32,
|
||
|
|
alaQoSActionWredMaximumThresholdStatus INTEGER,
|
||
|
|
alaQoSActionWredMinimumThreshold Integer32,
|
||
|
|
alaQoSActionWredMinimumThresholdStatus INTEGER,
|
||
|
|
alaQoSActionWredMaximumProbability Integer32,
|
||
|
|
alaQoSActionWredMaximumProbabilityStatus INTEGER,
|
||
|
|
alaQoSActionMinimumBandwidth Integer32,
|
||
|
|
alaQoSActionMinimumBandwidthStatus INTEGER,
|
||
|
|
alaQoSActionMaximumBandwidth Integer32,
|
||
|
|
alaQoSActionMaximumBandwidthStatus INTEGER,
|
||
|
|
alaQoSActionPeakBandwidth Integer32,
|
||
|
|
alaQoSActionPeakBandwidthStatus INTEGER,
|
||
|
|
alaQoSActionPriority Integer32,
|
||
|
|
alaQoSActionPriorityStatus INTEGER,
|
||
|
|
alaQoSActionShared INTEGER,
|
||
|
|
alaQoSActionJitter Integer32,
|
||
|
|
alaQoSActionJitterStatus INTEGER,
|
||
|
|
alaQoSActionLatency Integer32,
|
||
|
|
alaQoSActionLatencyStatus INTEGER,
|
||
|
|
alaQoSActionMaximumDepth Integer32,
|
||
|
|
alaQoSActionMaximumDepthStatus INTEGER,
|
||
|
|
alaQoSActionMaximumBuffers Integer32,
|
||
|
|
alaQoSActionMaximumBuffersStatus INTEGER,
|
||
|
|
alaQoSAction8021p Integer32,
|
||
|
|
alaQoSAction8021pStatus INTEGER,
|
||
|
|
alaQoSActionTos Integer32,
|
||
|
|
alaQoSActionTosStatus INTEGER,
|
||
|
|
alaQoSActionDscp Integer32,
|
||
|
|
alaQoSActionDscpStatus INTEGER,
|
||
|
|
alaQoSActionMapFrom INTEGER,
|
||
|
|
alaQoSActionMapTo INTEGER,
|
||
|
|
alaQoSActionMapGroup DisplayString,
|
||
|
|
alaQoSActionMapGroupStatus INTEGER,
|
||
|
|
alaQoSActionSourceRewriteIpAddr IpAddress,
|
||
|
|
alaQoSActionSourceRewriteIpAddrStatus INTEGER,
|
||
|
|
alaQoSActionSourceRewriteIpMask IpAddress,
|
||
|
|
alaQoSActionSourceRewriteNetworkGroup DisplayString,
|
||
|
|
alaQoSActionSourceRewriteNetworkGroupStatus INTEGER,
|
||
|
|
alaQoSActionDestinationRewriteIpAddr IpAddress,
|
||
|
|
alaQoSActionDestinationRewriteIpAddrStatus INTEGER,
|
||
|
|
alaQoSActionDestinationRewriteIpMask IpAddress,
|
||
|
|
alaQoSActionDestinationRewriteNetworkGroup DisplayString,
|
||
|
|
alaQoSActionDestinationRewriteNetworkGroupStatus INTEGER,
|
||
|
|
alaQoSActionLoadBalanceGroup DisplayString,
|
||
|
|
alaQoSActionLoadBalanceGroupStatus INTEGER,
|
||
|
|
alaQoSActionPermanentGatewayIpAddr IpAddress,
|
||
|
|
alaQoSActionPermanentGatewayIpAddrStatus INTEGER,
|
||
|
|
alaQoSActionAlternateGatewayIpAddr IpAddress,
|
||
|
|
alaQoSActionAlternateGatewayIpAddrStatus INTEGER,
|
||
|
|
alaQoSActionRowStatus RowStatus,
|
||
|
|
alaQoSActionMinimumDepth Integer32,
|
||
|
|
alaQoSActionMinimumDepthStatus INTEGER,
|
||
|
|
alaQoSActionVPNAccess INTEGER,
|
||
|
|
alaQoSActionNocache INTEGER,
|
||
|
|
alaQoSActionPortdisable INTEGER,
|
||
|
|
alaQoSActionRedirectSlot Integer32,
|
||
|
|
alaQoSActionRedirectSlotStatus INTEGER,
|
||
|
|
alaQoSActionRedirectPort Integer32,
|
||
|
|
alaQoSActionRedirectAgg Integer32,
|
||
|
|
alaQoSActionRedirectAggStatus INTEGER,
|
||
|
|
alaQoSActionMirrorSlot Integer32,
|
||
|
|
alaQoSActionMirrorPort Integer32,
|
||
|
|
alaQoSActionMirrorMode INTEGER,
|
||
|
|
alaQoSActionMirrorModeStatus INTEGER,
|
||
|
|
alaQoSActionCIR Integer32,
|
||
|
|
alaQoSActionCIRStatus INTEGER,
|
||
|
|
alaQoSActionCBS Integer32,
|
||
|
|
alaQoSActionCBSStatus INTEGER,
|
||
|
|
alaQoSActionPIR Integer32,
|
||
|
|
alaQoSActionPIRStatus INTEGER,
|
||
|
|
alaQoSActionPBS Integer32,
|
||
|
|
alaQoSActionPBSStatus INTEGER,
|
||
|
|
alaQoSActionCounterColor INTEGER
|
||
|
|
}
|
||
|
|
|
||
|
|
alaQoSActionName OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..31))
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Name of action"
|
||
|
|
::= { alaQoSActionEntry 1 }
|
||
|
|
|
||
|
|
alaQoSActionSource OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
ldap (1),
|
||
|
|
cli (2),
|
||
|
|
blt (3),
|
||
|
|
api (4),
|
||
|
|
imp (5)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "What entity created the action."
|
||
|
|
DEFVAL { cli }
|
||
|
|
::= { alaQoSActionEntry 2 }
|
||
|
|
|
||
|
|
alaQoSActionDisposition OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
accept (1),
|
||
|
|
drop (2),
|
||
|
|
deny (3)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Disposition of traffic using the action.
|
||
|
|
Use to filter out unwanted traffic."
|
||
|
|
DEFVAL { accept }
|
||
|
|
::= { alaQoSActionEntry 3 }
|
||
|
|
|
||
|
|
alaQoSActionDropAlgorithm OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
tail (1),
|
||
|
|
wred (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Which drop algorithm should be used to discard traffic when
|
||
|
|
oversubscribed."
|
||
|
|
DEFVAL { tail }
|
||
|
|
::= { alaQoSActionEntry 4 }
|
||
|
|
|
||
|
|
alaQoSActionWredMaximumThreshold OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Bandwidth at which WRED should discard most traffic."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { alaQoSActionEntry 5 }
|
||
|
|
|
||
|
|
alaQoSActionWredMaximumThresholdStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether WRED maximum threshold
|
||
|
|
is specified(enabled) or not(disabled)."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSActionEntry 6 }
|
||
|
|
|
||
|
|
alaQoSActionWredMinimumThreshold OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Bandwidth at which WRED should start to discard traffic."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { alaQoSActionEntry 7 }
|
||
|
|
|
||
|
|
alaQoSActionWredMinimumThresholdStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether WRED minimum threshold
|
||
|
|
is specified(enabled) or not(disabled)."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSActionEntry 8 }
|
||
|
|
|
||
|
|
alaQoSActionWredMaximumProbability OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Probabilty that traffic will be dropped at WRED
|
||
|
|
maximum threshold."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { alaQoSActionEntry 9 }
|
||
|
|
|
||
|
|
alaQoSActionWredMaximumProbabilityStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether WRED maximum probability
|
||
|
|
is specified(enabled) or not(disabled)."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSActionEntry 10 }
|
||
|
|
|
||
|
|
alaQoSActionMinimumBandwidth OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Minimum bandwidth (Kbits/sec) to guarantee for traffic"
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { alaQoSActionEntry 11 }
|
||
|
|
|
||
|
|
alaQoSActionMinimumBandwidthStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether minimum bandwidth
|
||
|
|
is specified(enabled) or not(disabled)."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSActionEntry 12 }
|
||
|
|
|
||
|
|
alaQoSActionMaximumBandwidth OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Maximum bandwidth (Kbits/sec) allowed for traffic"
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { alaQoSActionEntry 13 }
|
||
|
|
|
||
|
|
alaQoSActionMaximumBandwidthStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether maximum bandwidth
|
||
|
|
is specified(enabled) or not(disabled)."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSActionEntry 14 }
|
||
|
|
|
||
|
|
alaQoSActionPeakBandwidth OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Peak bandwidth (Kbits/sec) allowed for traffic"
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { alaQoSActionEntry 15 }
|
||
|
|
|
||
|
|
alaQoSActionPeakBandwidthStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether peak bandwidth
|
||
|
|
is specified(enabled) or not(disabled)."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSActionEntry 16 }
|
||
|
|
|
||
|
|
alaQoSActionPriority OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..7)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Internal and queueing priority to use for traffic."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { alaQoSActionEntry 17 }
|
||
|
|
|
||
|
|
alaQoSActionPriorityStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether priority
|
||
|
|
is specified(enabled) or not(disabled)."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSActionEntry 18 }
|
||
|
|
|
||
|
|
alaQoSActionShared OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
yes (1),
|
||
|
|
no (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "When enabled, try and share any resources
|
||
|
|
(queues/limiters/descriptors) when more than one policy uses
|
||
|
|
the same action."
|
||
|
|
DEFVAL { no }
|
||
|
|
::= { alaQoSActionEntry 19 }
|
||
|
|
|
||
|
|
alaQoSActionJitter OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Maximum jitter to allow for traffic."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { alaQoSActionEntry 20 }
|
||
|
|
|
||
|
|
alaQoSActionJitterStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether jitter
|
||
|
|
is specified(enabled) or not(disabled)."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSActionEntry 21 }
|
||
|
|
|
||
|
|
alaQoSActionLatency OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Maximum latency to allow for traffic."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { alaQoSActionEntry 22 }
|
||
|
|
|
||
|
|
alaQoSActionLatencyStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether latency
|
||
|
|
is specified(enabled) or not(disabled)."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSActionEntry 23 }
|
||
|
|
|
||
|
|
alaQoSActionMaximumDepth OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Maximum depth (Kbytes) of queues for traffic.
|
||
|
|
Used for EBS in tri-color marker applications."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { alaQoSActionEntry 24 }
|
||
|
|
|
||
|
|
alaQoSActionMaximumDepthStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether maximum depth
|
||
|
|
is specified(enabled) or not(disabled)."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSActionEntry 25 }
|
||
|
|
|
||
|
|
alaQoSActionMaximumBuffers OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..2047)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Maxmimum buffers for queues for traffic."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { alaQoSActionEntry 26 }
|
||
|
|
|
||
|
|
alaQoSActionMaximumBuffersStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether maximum buffers
|
||
|
|
is specified(enabled) or not(disabled)."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSActionEntry 27 }
|
||
|
|
|
||
|
|
alaQoSAction8021p OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..7)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "802.1p value to stamp on traffic."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { alaQoSActionEntry 28 }
|
||
|
|
|
||
|
|
alaQoSAction8021pStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether 802.1p
|
||
|
|
is specified(enabled) or not(disabled)."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSActionEntry 29 }
|
||
|
|
|
||
|
|
alaQoSActionTos OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..7)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "TOS value to stamp on traffic. (High 3 bits of TOS byte)"
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { alaQoSActionEntry 30 }
|
||
|
|
|
||
|
|
alaQoSActionTosStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether TOS
|
||
|
|
is specified(enabled) or not(disabled)."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSActionEntry 31 }
|
||
|
|
|
||
|
|
alaQoSActionDscp OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..63)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "TOS value to stamp on traffic. (High 6 bits of TOS byte)"
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { alaQoSActionEntry 32 }
|
||
|
|
|
||
|
|
alaQoSActionDscpStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether DSCP
|
||
|
|
is specified(enabled) or not(disabled)."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSActionEntry 33 }
|
||
|
|
|
||
|
|
alaQoSActionMapFrom OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
b8021p (1),
|
||
|
|
tos (2),
|
||
|
|
dscp (3)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "What field to use as key for mapping 802.1p/TOS/DSCP priorities"
|
||
|
|
DEFVAL { b8021p }
|
||
|
|
::= { alaQoSActionEntry 34 }
|
||
|
|
|
||
|
|
alaQoSActionMapTo OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
b8021p (1),
|
||
|
|
tos (2),
|
||
|
|
dscp (3)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "What field to rewrite due to remapping 802.1p/TOS/DSCP
|
||
|
|
priorities"
|
||
|
|
DEFVAL { b8021p }
|
||
|
|
::= { alaQoSActionEntry 35 }
|
||
|
|
|
||
|
|
alaQoSActionMapGroup OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..31))
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Name of the map group to use when remapping 802.1p/TOS/DSCP
|
||
|
|
priorities."
|
||
|
|
::= { alaQoSActionEntry 36 }
|
||
|
|
|
||
|
|
alaQoSActionMapGroupStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether a map group
|
||
|
|
is specified(enabled) or not(disabled)."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSActionEntry 37 }
|
||
|
|
|
||
|
|
alaQoSActionSourceRewriteIpAddr OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Source IP address to rewrite on traffic."
|
||
|
|
DEFVAL { '00000000'h }
|
||
|
|
::= { alaQoSActionEntry 38 }
|
||
|
|
|
||
|
|
alaQoSActionSourceRewriteIpAddrStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether source rewrite IP address & mask
|
||
|
|
is specified(enabled) or not(disabled)."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSActionEntry 39 }
|
||
|
|
|
||
|
|
alaQoSActionSourceRewriteIpMask OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Source rewrite IP mask to determine how much of
|
||
|
|
source IP to rewrite."
|
||
|
|
DEFVAL { 'ffffffff'h }
|
||
|
|
::= { alaQoSActionEntry 40 }
|
||
|
|
|
||
|
|
alaQoSActionSourceRewriteNetworkGroup OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..31))
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Name of network group containing source address/masks to rewrite
|
||
|
|
on traffic. Must be a one to on correspondence with
|
||
|
|
source network group entries in the condition."
|
||
|
|
::= { alaQoSActionEntry 41 }
|
||
|
|
|
||
|
|
alaQoSActionSourceRewriteNetworkGroupStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether source rewrite network group
|
||
|
|
is specified(enabled) or not(disabled)."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSActionEntry 42 }
|
||
|
|
|
||
|
|
alaQoSActionDestinationRewriteIpAddr OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Destination IP address to rewrite on traffic."
|
||
|
|
DEFVAL { '00000000'h }
|
||
|
|
::= { alaQoSActionEntry 43 }
|
||
|
|
|
||
|
|
alaQoSActionDestinationRewriteIpAddrStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether destination rewrite IP address
|
||
|
|
& mask is specified(enabled) or not(disabled)."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSActionEntry 44 }
|
||
|
|
|
||
|
|
alaQoSActionDestinationRewriteIpMask OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Destination rewrite IP mask to determine how much of
|
||
|
|
destination IP to rewrite."
|
||
|
|
DEFVAL { 'ffffffff'h }
|
||
|
|
::= { alaQoSActionEntry 45 }
|
||
|
|
|
||
|
|
alaQoSActionDestinationRewriteNetworkGroup OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..31))
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Name of network group containing destination address/masks to
|
||
|
|
rewrite on traffic. Must be a one to on correspondence with
|
||
|
|
destination network group entries in the condition."
|
||
|
|
::= { alaQoSActionEntry 46 }
|
||
|
|
|
||
|
|
alaQoSActionDestinationRewriteNetworkGroupStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether destination rewrite network
|
||
|
|
group is specified(enabled) or not(disabled)."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSActionEntry 47 }
|
||
|
|
|
||
|
|
alaQoSActionLoadBalanceGroup OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..23))
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Name of load balance group to use for traffic"
|
||
|
|
::= { alaQoSActionEntry 48 }
|
||
|
|
|
||
|
|
alaQoSActionLoadBalanceGroupStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether load balanace group
|
||
|
|
is specified(enabled) or not(disabled)."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSActionEntry 49 }
|
||
|
|
|
||
|
|
alaQoSActionPermanentGatewayIpAddr OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Next hop gateway to use for traffic"
|
||
|
|
DEFVAL { '00000000'h }
|
||
|
|
::= { alaQoSActionEntry 50 }
|
||
|
|
|
||
|
|
alaQoSActionPermanentGatewayIpAddrStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether permanent gateway IP address
|
||
|
|
is specified(enabled) or not(disabled)."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSActionEntry 51 }
|
||
|
|
|
||
|
|
alaQoSActionAlternateGatewayIpAddr OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Next hop gateway to use for traffic that doesn't have an
|
||
|
|
explicit route. Use this gateway instead of default routes."
|
||
|
|
DEFVAL { '00000000'h }
|
||
|
|
::= { alaQoSActionEntry 52 }
|
||
|
|
|
||
|
|
alaQoSActionAlternateGatewayIpAddrStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether alternate gateway IP address
|
||
|
|
is specified(enabled) or not(disabled)."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSActionEntry 53 }
|
||
|
|
|
||
|
|
alaQoSActionRowStatus OBJECT-TYPE
|
||
|
|
SYNTAX RowStatus
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Used to create/delete actions according to the
|
||
|
|
RowStatus convention"
|
||
|
|
::= { alaQoSActionEntry 54 }
|
||
|
|
|
||
|
|
alaQoSActionMinimumDepth OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Minimum depth (Kbytes) of queues for traffic.
|
||
|
|
Used for CBS in tri-color marker applications."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { alaQoSActionEntry 55 }
|
||
|
|
|
||
|
|
alaQoSActionMinimumDepthStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether minimum depth
|
||
|
|
is specified(enabled) or not(disabled)."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSActionEntry 56 }
|
||
|
|
|
||
|
|
alaQoSActionVPNAccess OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
protect (1),
|
||
|
|
bypass (2),
|
||
|
|
drop (3)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "How to encrypt traffic"
|
||
|
|
DEFVAL { bypass }
|
||
|
|
::= { alaQoSActionEntry 57 }
|
||
|
|
|
||
|
|
alaQoSActionNocache OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
yes (1),
|
||
|
|
no (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "When enabled, don't make hardware entries for matching flows."
|
||
|
|
DEFVAL { no }
|
||
|
|
::= { alaQoSActionEntry 58 }
|
||
|
|
|
||
|
|
alaQoSActionPortdisable OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
yes (1),
|
||
|
|
no (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "When enabled, disable the physical source port of the traffic."
|
||
|
|
DEFVAL { no }
|
||
|
|
::= { alaQoSActionEntry 59 }
|
||
|
|
|
||
|
|
alaQoSActionRedirectSlot OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..16)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Destination physical slot for redirected traffic"
|
||
|
|
DEFVAL { 1 }
|
||
|
|
::= { alaQoSActionEntry 60 }
|
||
|
|
|
||
|
|
alaQoSActionRedirectSlotStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status for alaQoSActionRedirectSlotStatus field"
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSActionEntry 61 }
|
||
|
|
|
||
|
|
alaQoSActionRedirectPort OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..52)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Destination physical port for redirected traffic"
|
||
|
|
DEFVAL { 1 }
|
||
|
|
::= { alaQoSActionEntry 62 }
|
||
|
|
|
||
|
|
alaQoSActionRedirectAgg OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..32)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Destination linkagg for redirected traffic"
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { alaQoSActionEntry 63 }
|
||
|
|
|
||
|
|
alaQoSActionRedirectAggStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status for alaQoSActionRedirectAggStatus field"
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSActionEntry 64 }
|
||
|
|
|
||
|
|
alaQoSActionMirrorSlot OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..16)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Destination physical slot for mirrored traffic"
|
||
|
|
DEFVAL { 1 }
|
||
|
|
::= { alaQoSActionEntry 65 }
|
||
|
|
|
||
|
|
alaQoSActionMirrorPort OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..52)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Destination physical port for mirrored traffic"
|
||
|
|
DEFVAL { 1 }
|
||
|
|
::= { alaQoSActionEntry 66 }
|
||
|
|
|
||
|
|
alaQoSActionMirrorMode OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
ingress(1),
|
||
|
|
egress(2),
|
||
|
|
both(3)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Mirroring mode"
|
||
|
|
DEFVAL { 1 }
|
||
|
|
::= { alaQoSActionEntry 67 }
|
||
|
|
|
||
|
|
alaQoSActionMirrorModeStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status for alaQoSActionMirrorMode field"
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSActionEntry 68 }
|
||
|
|
|
||
|
|
alaQoSActionCIR OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
UNITS "kilobits per second"
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Committed Information Rate - bandwidth values in kilobits per second."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { alaQoSActionEntry 69 }
|
||
|
|
|
||
|
|
alaQoSActionCIRStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether CIR value is specified(enabled)
|
||
|
|
or not(disabled)."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSActionEntry 70 }
|
||
|
|
|
||
|
|
alaQoSActionCBS OBJECT-TYPE
|
||
|
|
SYNTAX Integer32(0 .. 2147450880)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Committed Burst Size - bucket size in byte."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { alaQoSActionEntry 71 }
|
||
|
|
|
||
|
|
alaQoSActionCBSStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether CBS value is specified(enabled)
|
||
|
|
or not(disabled)."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSActionEntry 72 }
|
||
|
|
|
||
|
|
alaQoSActionPIR OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
UNITS "kilobits per second"
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Peak Information Rate - bandwidth values in kilobits per second."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { alaQoSActionEntry 73 }
|
||
|
|
|
||
|
|
alaQoSActionPIRStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether PIR value is specified(enabled)
|
||
|
|
or not(disabled)."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSActionEntry 74 }
|
||
|
|
|
||
|
|
alaQoSActionPBS OBJECT-TYPE
|
||
|
|
SYNTAX Integer32(0 .. 2147450880)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Peak Burst Size - bucket size in byte."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { alaQoSActionEntry 75 }
|
||
|
|
|
||
|
|
alaQoSActionPBSStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether PBS value is specified(enabled)
|
||
|
|
or not(disabled)."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSActionEntry 76 }
|
||
|
|
|
||
|
|
alaQoSActionCounterColor OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
rednonred (1),
|
||
|
|
greennongreen (2),
|
||
|
|
greenred (3),
|
||
|
|
greenyellow (4),
|
||
|
|
redyellow (5)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Specifies the color mode for the counters which will be used for sr/trTCM."
|
||
|
|
DEFVAL { redyellow }
|
||
|
|
::= { alaQoSActionEntry 77 }
|
||
|
|
|
||
|
|
--
|
||
|
|
-- Definition of action table
|
||
|
|
--
|
||
|
|
|
||
|
|
alaQoSAppliedActionTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF QoSAppliedActionEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Table of QoS AppliedAction definitions"
|
||
|
|
::= { alaQoSMIBObjects 28 }
|
||
|
|
|
||
|
|
alaQoSAppliedActionEntry OBJECT-TYPE
|
||
|
|
SYNTAX QoSAppliedActionEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Definition of QoS AppliedAction"
|
||
|
|
INDEX {
|
||
|
|
alaQoSAppliedActionName
|
||
|
|
}
|
||
|
|
::= { alaQoSAppliedActionTable 1 }
|
||
|
|
|
||
|
|
QoSAppliedActionEntry ::=
|
||
|
|
SEQUENCE
|
||
|
|
{
|
||
|
|
alaQoSAppliedActionName DisplayString,
|
||
|
|
alaQoSAppliedActionSource INTEGER,
|
||
|
|
alaQoSAppliedActionDisposition INTEGER,
|
||
|
|
alaQoSAppliedActionDropAlgorithm INTEGER,
|
||
|
|
alaQoSAppliedActionWredMaximumThreshold Integer32,
|
||
|
|
alaQoSAppliedActionWredMaximumThresholdStatus INTEGER,
|
||
|
|
alaQoSAppliedActionWredMinimumThreshold Integer32,
|
||
|
|
alaQoSAppliedActionWredMinimumThresholdStatus INTEGER,
|
||
|
|
alaQoSAppliedActionWredMaximumProbability Integer32,
|
||
|
|
alaQoSAppliedActionWredMaximumProbabilityStatus INTEGER,
|
||
|
|
alaQoSAppliedActionMinimumBandwidth Integer32,
|
||
|
|
alaQoSAppliedActionMinimumBandwidthStatus INTEGER,
|
||
|
|
alaQoSAppliedActionMaximumBandwidth Integer32,
|
||
|
|
alaQoSAppliedActionMaximumBandwidthStatus INTEGER,
|
||
|
|
alaQoSAppliedActionPeakBandwidth Integer32,
|
||
|
|
alaQoSAppliedActionPeakBandwidthStatus INTEGER,
|
||
|
|
alaQoSAppliedActionPriority Integer32,
|
||
|
|
alaQoSAppliedActionPriorityStatus INTEGER,
|
||
|
|
alaQoSAppliedActionShared INTEGER,
|
||
|
|
alaQoSAppliedActionJitter Integer32,
|
||
|
|
alaQoSAppliedActionJitterStatus INTEGER,
|
||
|
|
alaQoSAppliedActionLatency Integer32,
|
||
|
|
alaQoSAppliedActionLatencyStatus INTEGER,
|
||
|
|
alaQoSAppliedActionMaximumDepth Integer32,
|
||
|
|
alaQoSAppliedActionMaximumDepthStatus INTEGER,
|
||
|
|
alaQoSAppliedActionMaximumBuffers Integer32,
|
||
|
|
alaQoSAppliedActionMaximumBuffersStatus INTEGER,
|
||
|
|
alaQoSAppliedAction8021p Integer32,
|
||
|
|
alaQoSAppliedAction8021pStatus INTEGER,
|
||
|
|
alaQoSAppliedActionTos Integer32,
|
||
|
|
alaQoSAppliedActionTosStatus INTEGER,
|
||
|
|
alaQoSAppliedActionDscp Integer32,
|
||
|
|
alaQoSAppliedActionDscpStatus INTEGER,
|
||
|
|
alaQoSAppliedActionMapFrom INTEGER,
|
||
|
|
alaQoSAppliedActionMapTo INTEGER,
|
||
|
|
alaQoSAppliedActionMapGroup DisplayString,
|
||
|
|
alaQoSAppliedActionMapGroupStatus INTEGER,
|
||
|
|
alaQoSAppliedActionSourceRewriteIpAddr IpAddress,
|
||
|
|
alaQoSAppliedActionSourceRewriteIpAddrStatus INTEGER,
|
||
|
|
alaQoSAppliedActionSourceRewriteIpMask IpAddress,
|
||
|
|
alaQoSAppliedActionSourceRewriteNetworkGroup DisplayString,
|
||
|
|
alaQoSAppliedActionSourceRewriteNetworkGroupStatus INTEGER,
|
||
|
|
alaQoSAppliedActionDestinationRewriteIpAddr IpAddress,
|
||
|
|
alaQoSAppliedActionDestinationRewriteIpAddrStatus INTEGER,
|
||
|
|
alaQoSAppliedActionDestinationRewriteIpMask IpAddress,
|
||
|
|
alaQoSAppliedActionDestinationRewriteNetworkGroup DisplayString,
|
||
|
|
alaQoSAppliedActionDestinationRewriteNetworkGroupStatus INTEGER,
|
||
|
|
alaQoSAppliedActionLoadBalanceGroup DisplayString,
|
||
|
|
alaQoSAppliedActionLoadBalanceGroupStatus INTEGER,
|
||
|
|
alaQoSAppliedActionPermanentGatewayIpAddr IpAddress,
|
||
|
|
alaQoSAppliedActionPermanentGatewayIpAddrStatus INTEGER,
|
||
|
|
alaQoSAppliedActionAlternateGatewayIpAddr IpAddress,
|
||
|
|
alaQoSAppliedActionAlternateGatewayIpAddrStatus INTEGER,
|
||
|
|
alaQoSAppliedActionRowStatus RowStatus,
|
||
|
|
alaQoSAppliedActionMinimumDepth Integer32,
|
||
|
|
alaQoSAppliedActionMinimumDepthStatus INTEGER,
|
||
|
|
alaQoSAppliedActionVPNAccess INTEGER,
|
||
|
|
alaQoSAppliedActionNocache INTEGER,
|
||
|
|
alaQoSAppliedActionPortdisable INTEGER,
|
||
|
|
alaQoSAppliedActionRedirectSlot Integer32,
|
||
|
|
alaQoSAppliedActionRedirectSlotStatus INTEGER,
|
||
|
|
alaQoSAppliedActionRedirectPort Integer32,
|
||
|
|
alaQoSAppliedActionRedirectAgg Integer32,
|
||
|
|
alaQoSAppliedActionRedirectAggStatus INTEGER,
|
||
|
|
alaQoSAppliedActionMirrorSlot Integer32,
|
||
|
|
alaQoSAppliedActionMirrorPort Integer32,
|
||
|
|
alaQoSAppliedActionMirrorMode INTEGER,
|
||
|
|
alaQoSAppliedActionMirrorModeStatus INTEGER,
|
||
|
|
alaQoSAppliedActionCIR Integer32,
|
||
|
|
alaQoSAppliedActionCIRStatus INTEGER,
|
||
|
|
alaQoSAppliedActionCBS Integer32,
|
||
|
|
alaQoSAppliedActionCBSStatus INTEGER,
|
||
|
|
alaQoSAppliedActionPIR Integer32,
|
||
|
|
alaQoSAppliedActionPIRStatus INTEGER,
|
||
|
|
alaQoSAppliedActionPBS Integer32,
|
||
|
|
alaQoSAppliedActionPBSStatus INTEGER,
|
||
|
|
alaQoSAppliedActionCounterColor INTEGER
|
||
|
|
}
|
||
|
|
|
||
|
|
alaQoSAppliedActionName OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..31))
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Name of action"
|
||
|
|
::= { alaQoSAppliedActionEntry 1 }
|
||
|
|
|
||
|
|
alaQoSAppliedActionSource OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
ldap (1),
|
||
|
|
cli (2),
|
||
|
|
blt (3),
|
||
|
|
api (4),
|
||
|
|
imp (5)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "What entity created the action."
|
||
|
|
::= { alaQoSAppliedActionEntry 2 }
|
||
|
|
|
||
|
|
alaQoSAppliedActionDisposition OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
accept (1),
|
||
|
|
drop (2),
|
||
|
|
deny (3)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Disposition of traffic using the action.
|
||
|
|
Use to filter out unwanted traffic."
|
||
|
|
::= { alaQoSAppliedActionEntry 3 }
|
||
|
|
|
||
|
|
alaQoSAppliedActionDropAlgorithm OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
tail (1),
|
||
|
|
wred (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Which drop algorithm should be used to discard traffic when
|
||
|
|
oversubscribed."
|
||
|
|
::= { alaQoSAppliedActionEntry 4 }
|
||
|
|
|
||
|
|
alaQoSAppliedActionWredMaximumThreshold OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Bandwidth at which WRED should discard most traffic."
|
||
|
|
::= { alaQoSAppliedActionEntry 5 }
|
||
|
|
|
||
|
|
alaQoSAppliedActionWredMaximumThresholdStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether WRED maximum threshold
|
||
|
|
is specified(enabled) or not(disabled)."
|
||
|
|
::= { alaQoSAppliedActionEntry 6 }
|
||
|
|
|
||
|
|
alaQoSAppliedActionWredMinimumThreshold OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Bandwidth at which WRED should start to discard traffic."
|
||
|
|
::= { alaQoSAppliedActionEntry 7 }
|
||
|
|
|
||
|
|
alaQoSAppliedActionWredMinimumThresholdStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether WRED minimum threshold
|
||
|
|
is specified(enabled) or not(disabled)."
|
||
|
|
::= { alaQoSAppliedActionEntry 8 }
|
||
|
|
|
||
|
|
alaQoSAppliedActionWredMaximumProbability OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Probabilty that traffic will be dropped at WRED
|
||
|
|
maximum threshold."
|
||
|
|
::= { alaQoSAppliedActionEntry 9 }
|
||
|
|
|
||
|
|
alaQoSAppliedActionWredMaximumProbabilityStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether WRED maximum probability
|
||
|
|
is specified(enabled) or not(disabled)."
|
||
|
|
::= { alaQoSAppliedActionEntry 10 }
|
||
|
|
|
||
|
|
alaQoSAppliedActionMinimumBandwidth OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Minimum bandwidth (Kbits/sec) to guarantee for traffic"
|
||
|
|
::= { alaQoSAppliedActionEntry 11 }
|
||
|
|
|
||
|
|
alaQoSAppliedActionMinimumBandwidthStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether minimum bandwidth
|
||
|
|
is specified(enabled) or not(disabled)."
|
||
|
|
::= { alaQoSAppliedActionEntry 12 }
|
||
|
|
|
||
|
|
alaQoSAppliedActionMaximumBandwidth OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Maximum bandwidth (Kbits/sec) allowed for traffic"
|
||
|
|
::= { alaQoSAppliedActionEntry 13 }
|
||
|
|
|
||
|
|
alaQoSAppliedActionMaximumBandwidthStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether maximum bandwidth
|
||
|
|
is specified(enabled) or not(disabled)."
|
||
|
|
::= { alaQoSAppliedActionEntry 14 }
|
||
|
|
|
||
|
|
alaQoSAppliedActionPeakBandwidth OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Peak bandwidth (Kbits/sec) allowed for traffic"
|
||
|
|
::= { alaQoSAppliedActionEntry 15 }
|
||
|
|
|
||
|
|
alaQoSAppliedActionPeakBandwidthStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether peak bandwidth
|
||
|
|
is specified(enabled) or not(disabled)."
|
||
|
|
::= { alaQoSAppliedActionEntry 16 }
|
||
|
|
|
||
|
|
alaQoSAppliedActionPriority OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..7)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Internal and queueing priority to use for traffic."
|
||
|
|
::= { alaQoSAppliedActionEntry 17 }
|
||
|
|
|
||
|
|
alaQoSAppliedActionPriorityStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether priority
|
||
|
|
is specified(enabled) or not(disabled)."
|
||
|
|
::= { alaQoSAppliedActionEntry 18 }
|
||
|
|
|
||
|
|
alaQoSAppliedActionShared OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
yes (1),
|
||
|
|
no (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "When enabled, try and share any resources
|
||
|
|
(queues/limiters/descriptors) when more than one policy uses
|
||
|
|
the same action."
|
||
|
|
::= { alaQoSAppliedActionEntry 19 }
|
||
|
|
|
||
|
|
alaQoSAppliedActionJitter OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Maximum jitter to allow for traffic."
|
||
|
|
::= { alaQoSAppliedActionEntry 20 }
|
||
|
|
|
||
|
|
alaQoSAppliedActionJitterStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether jitter
|
||
|
|
is specified(enabled) or not(disabled)."
|
||
|
|
::= { alaQoSAppliedActionEntry 21 }
|
||
|
|
|
||
|
|
alaQoSAppliedActionLatency OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Maximum latency to allow for traffic."
|
||
|
|
::= { alaQoSAppliedActionEntry 22 }
|
||
|
|
|
||
|
|
alaQoSAppliedActionLatencyStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether latency
|
||
|
|
is specified(enabled) or not(disabled)."
|
||
|
|
::= { alaQoSAppliedActionEntry 23 }
|
||
|
|
|
||
|
|
alaQoSAppliedActionMaximumDepth OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Maximum depth (Kbytes) of queues for traffic.
|
||
|
|
Used for EBS in tri-color marker applications."
|
||
|
|
::= { alaQoSAppliedActionEntry 24 }
|
||
|
|
|
||
|
|
alaQoSAppliedActionMaximumDepthStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether maximum depth
|
||
|
|
is specified(enabled) or not(disabled)."
|
||
|
|
::= { alaQoSAppliedActionEntry 25 }
|
||
|
|
|
||
|
|
alaQoSAppliedActionMaximumBuffers OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..2047)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Maxmimum buffers for queues for traffic."
|
||
|
|
::= { alaQoSAppliedActionEntry 26 }
|
||
|
|
|
||
|
|
alaQoSAppliedActionMaximumBuffersStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether maximum buffers
|
||
|
|
is specified(enabled) or not(disabled)."
|
||
|
|
::= { alaQoSAppliedActionEntry 27 }
|
||
|
|
|
||
|
|
alaQoSAppliedAction8021p OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..7)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "802.1p value to stamp on traffic."
|
||
|
|
::= { alaQoSAppliedActionEntry 28 }
|
||
|
|
|
||
|
|
alaQoSAppliedAction8021pStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether 802.1p
|
||
|
|
is specified(enabled) or not(disabled)."
|
||
|
|
::= { alaQoSAppliedActionEntry 29 }
|
||
|
|
|
||
|
|
alaQoSAppliedActionTos OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..7)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "TOS value to stamp on traffic. (High 3 bits of TOS byte)"
|
||
|
|
::= { alaQoSAppliedActionEntry 30 }
|
||
|
|
|
||
|
|
alaQoSAppliedActionTosStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether TOS
|
||
|
|
is specified(enabled) or not(disabled)."
|
||
|
|
::= { alaQoSAppliedActionEntry 31 }
|
||
|
|
|
||
|
|
alaQoSAppliedActionDscp OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..63)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "TOS value to stamp on traffic. (High 6 bits of TOS byte)"
|
||
|
|
::= { alaQoSAppliedActionEntry 32 }
|
||
|
|
|
||
|
|
alaQoSAppliedActionDscpStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether DSCP
|
||
|
|
is specified(enabled) or not(disabled)."
|
||
|
|
::= { alaQoSAppliedActionEntry 33 }
|
||
|
|
|
||
|
|
alaQoSAppliedActionMapFrom OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
b8021p (1),
|
||
|
|
tos (2),
|
||
|
|
dscp (3)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "What field to use as key for mapping 802.1p/TOS/DSCP priorities"
|
||
|
|
::= { alaQoSAppliedActionEntry 34 }
|
||
|
|
|
||
|
|
alaQoSAppliedActionMapTo OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
b8021p (1),
|
||
|
|
tos (2),
|
||
|
|
dscp (3)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "What field to rewrite due to remapping 802.1p/TOS/DSCP
|
||
|
|
priorities"
|
||
|
|
::= { alaQoSAppliedActionEntry 35 }
|
||
|
|
|
||
|
|
alaQoSAppliedActionMapGroup OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..31))
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Name of the map group to use when remapping 802.1p/TOS/DSCP
|
||
|
|
priorities."
|
||
|
|
::= { alaQoSAppliedActionEntry 36 }
|
||
|
|
|
||
|
|
alaQoSAppliedActionMapGroupStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether a map group
|
||
|
|
is specified(enabled) or not(disabled)."
|
||
|
|
::= { alaQoSAppliedActionEntry 37 }
|
||
|
|
|
||
|
|
alaQoSAppliedActionSourceRewriteIpAddr OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Source IP address to rewrite on traffic."
|
||
|
|
::= { alaQoSAppliedActionEntry 38 }
|
||
|
|
|
||
|
|
alaQoSAppliedActionSourceRewriteIpAddrStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether source rewrite IP address & mask
|
||
|
|
is specified(enabled) or not(disabled)."
|
||
|
|
::= { alaQoSAppliedActionEntry 39 }
|
||
|
|
|
||
|
|
alaQoSAppliedActionSourceRewriteIpMask OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Source rewrite IP mask to determine how much of
|
||
|
|
source IP to rewrite."
|
||
|
|
::= { alaQoSAppliedActionEntry 40 }
|
||
|
|
|
||
|
|
alaQoSAppliedActionSourceRewriteNetworkGroup OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..31))
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Name of network group containing source address/masks to rewrite
|
||
|
|
on traffic. Must be a one to on correspondence with
|
||
|
|
source network group entries in the condition."
|
||
|
|
::= { alaQoSAppliedActionEntry 41 }
|
||
|
|
|
||
|
|
alaQoSAppliedActionSourceRewriteNetworkGroupStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether source rewrite network group
|
||
|
|
is specified(enabled) or not(disabled)."
|
||
|
|
::= { alaQoSAppliedActionEntry 42 }
|
||
|
|
|
||
|
|
alaQoSAppliedActionDestinationRewriteIpAddr OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Destination IP address to rewrite on traffic."
|
||
|
|
::= { alaQoSAppliedActionEntry 43 }
|
||
|
|
|
||
|
|
alaQoSAppliedActionDestinationRewriteIpAddrStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether destination rewrite IP address
|
||
|
|
& mask is specified(enabled) or not(disabled)."
|
||
|
|
::= { alaQoSAppliedActionEntry 44 }
|
||
|
|
|
||
|
|
alaQoSAppliedActionDestinationRewriteIpMask OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Destination rewrite IP mask to determine how much of
|
||
|
|
destination IP to rewrite."
|
||
|
|
::= { alaQoSAppliedActionEntry 45 }
|
||
|
|
|
||
|
|
alaQoSAppliedActionDestinationRewriteNetworkGroup OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..31))
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Name of network group containing destination address/masks to
|
||
|
|
rewrite on traffic. Must be a one to on correspondence with
|
||
|
|
destination network group entries in the condition."
|
||
|
|
::= { alaQoSAppliedActionEntry 46 }
|
||
|
|
|
||
|
|
alaQoSAppliedActionDestinationRewriteNetworkGroupStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether destination rewrite network
|
||
|
|
group is specified(enabled) or not(disabled)."
|
||
|
|
::= { alaQoSAppliedActionEntry 47 }
|
||
|
|
|
||
|
|
alaQoSAppliedActionLoadBalanceGroup OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..23))
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Name of load balance group to use for traffic"
|
||
|
|
::= { alaQoSAppliedActionEntry 48 }
|
||
|
|
|
||
|
|
alaQoSAppliedActionLoadBalanceGroupStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether load balanace group
|
||
|
|
is specified(enabled) or not(disabled)."
|
||
|
|
::= { alaQoSAppliedActionEntry 49 }
|
||
|
|
|
||
|
|
alaQoSAppliedActionPermanentGatewayIpAddr OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Next hop gateway to use for traffic"
|
||
|
|
::= { alaQoSAppliedActionEntry 50 }
|
||
|
|
|
||
|
|
alaQoSAppliedActionPermanentGatewayIpAddrStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether permanent gateway IP address
|
||
|
|
is specified(enabled) or not(disabled)."
|
||
|
|
::= { alaQoSAppliedActionEntry 51 }
|
||
|
|
|
||
|
|
alaQoSAppliedActionAlternateGatewayIpAddr OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Next hop gateway to use for traffic that doesn't have an
|
||
|
|
explicit route. Use this gateway instead of default routes."
|
||
|
|
::= { alaQoSAppliedActionEntry 52 }
|
||
|
|
|
||
|
|
alaQoSAppliedActionAlternateGatewayIpAddrStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether alternate gateway IP address
|
||
|
|
is specified(enabled) or not(disabled)."
|
||
|
|
::= { alaQoSAppliedActionEntry 53 }
|
||
|
|
|
||
|
|
alaQoSAppliedActionRowStatus OBJECT-TYPE
|
||
|
|
SYNTAX RowStatus
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Used to create/delete actions according to the
|
||
|
|
RowStatus convention"
|
||
|
|
::= { alaQoSAppliedActionEntry 54 }
|
||
|
|
|
||
|
|
alaQoSAppliedActionMinimumDepth OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Minimum depth (Kbytes) of queues for traffic.
|
||
|
|
Used for CBS in tri-color marker applications."
|
||
|
|
::= { alaQoSAppliedActionEntry 55 }
|
||
|
|
|
||
|
|
alaQoSAppliedActionMinimumDepthStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether minimum depth
|
||
|
|
is specified(enabled) or not(disabled)."
|
||
|
|
::= { alaQoSAppliedActionEntry 56 }
|
||
|
|
|
||
|
|
alaQoSAppliedActionVPNAccess OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
protect (1),
|
||
|
|
bypass (2),
|
||
|
|
drop (3)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "How to encrypt traffic"
|
||
|
|
::= { alaQoSAppliedActionEntry 57 }
|
||
|
|
|
||
|
|
alaQoSAppliedActionNocache OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
yes (1),
|
||
|
|
no (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "When enabled, don't make hardware entries for matching flows."
|
||
|
|
::= { alaQoSAppliedActionEntry 58 }
|
||
|
|
|
||
|
|
alaQoSAppliedActionPortdisable OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
yes (1),
|
||
|
|
no (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "When enabled, disable the physical source port of the traffic."
|
||
|
|
::= { alaQoSAppliedActionEntry 59 }
|
||
|
|
|
||
|
|
alaQoSAppliedActionRedirectSlot OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..16)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Destination physical slot for redirected traffic"
|
||
|
|
::= { alaQoSAppliedActionEntry 60 }
|
||
|
|
|
||
|
|
alaQoSAppliedActionRedirectSlotStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status for alaQoSAppliedActionRedirectSlotStatus field"
|
||
|
|
::= { alaQoSAppliedActionEntry 61 }
|
||
|
|
|
||
|
|
alaQoSAppliedActionRedirectPort OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..52)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Destination physical port for redirected traffic"
|
||
|
|
::= { alaQoSAppliedActionEntry 62 }
|
||
|
|
|
||
|
|
alaQoSAppliedActionRedirectAgg OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..32)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Destination linkagg for redirected traffic"
|
||
|
|
::= { alaQoSAppliedActionEntry 63 }
|
||
|
|
|
||
|
|
alaQoSAppliedActionRedirectAggStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status for alaQoSAppliedActionRedirectAggStatus field"
|
||
|
|
::= { alaQoSAppliedActionEntry 64 }
|
||
|
|
|
||
|
|
alaQoSAppliedActionMirrorSlot OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..16)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Destination physical slot for mirrored traffic"
|
||
|
|
::= { alaQoSAppliedActionEntry 65 }
|
||
|
|
|
||
|
|
alaQoSAppliedActionMirrorPort OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..52)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Destination physical port for mirrored traffic"
|
||
|
|
::= { alaQoSAppliedActionEntry 66 }
|
||
|
|
|
||
|
|
alaQoSAppliedActionMirrorMode OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
ingress(1),
|
||
|
|
egress(2),
|
||
|
|
both(3)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Mirroring mode"
|
||
|
|
DEFVAL { 1 }
|
||
|
|
::= { alaQoSAppliedActionEntry 67 }
|
||
|
|
|
||
|
|
alaQoSAppliedActionMirrorModeStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status for alaQoSAppliedActionMirrorMode field"
|
||
|
|
::= { alaQoSAppliedActionEntry 68 }
|
||
|
|
|
||
|
|
alaQoSAppliedActionCIR OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
UNITS "kilobits per second"
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Committed Information Rate - bandwidth values in kilobits per second."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { alaQoSAppliedActionEntry 69 }
|
||
|
|
|
||
|
|
alaQoSAppliedActionCIRStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether CIR value is specified(enabled)
|
||
|
|
or not(disabled)."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSAppliedActionEntry 70 }
|
||
|
|
|
||
|
|
alaQoSAppliedActionCBS OBJECT-TYPE
|
||
|
|
SYNTAX Integer32(0 .. 2147450880)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Committed Burst Size - bucket size in byte."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { alaQoSAppliedActionEntry 71 }
|
||
|
|
|
||
|
|
alaQoSAppliedActionCBSStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether CBS value is specified(enabled)
|
||
|
|
or not(disabled)."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSAppliedActionEntry 72 }
|
||
|
|
|
||
|
|
alaQoSAppliedActionPIR OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
UNITS "kilobits per second"
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Peak Information Rate - bandwidth values in kilobits per second."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { alaQoSAppliedActionEntry 73 }
|
||
|
|
|
||
|
|
alaQoSAppliedActionPIRStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether PIR value is specified(enabled)
|
||
|
|
or not(disabled)."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSAppliedActionEntry 74 }
|
||
|
|
|
||
|
|
alaQoSAppliedActionPBS OBJECT-TYPE
|
||
|
|
SYNTAX Integer32(0 .. 2147450880)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Peak Burst Size - bucket size in byte."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { alaQoSAppliedActionEntry 75 }
|
||
|
|
|
||
|
|
alaQoSAppliedActionPBSStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether PBS value is specified(enabled)
|
||
|
|
or not(disabled)."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSAppliedActionEntry 76 }
|
||
|
|
|
||
|
|
alaQoSAppliedActionCounterColor OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
rednonred (1),
|
||
|
|
greennongreen (2),
|
||
|
|
greenred (3),
|
||
|
|
greenyellow (4),
|
||
|
|
redyellow (5)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Specifies the color mode for the counters which will be used for sr/trTCM."
|
||
|
|
DEFVAL { redyellow }
|
||
|
|
::= { alaQoSAppliedActionEntry 77 }
|
||
|
|
|
||
|
|
|
||
|
|
--
|
||
|
|
-- Definition of port table
|
||
|
|
--
|
||
|
|
|
||
|
|
alaQoSPortTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF QoSPortEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Table of QoS Port definitions"
|
||
|
|
::= { alaQoSMIBObjects 29 }
|
||
|
|
|
||
|
|
alaQoSPortEntry OBJECT-TYPE
|
||
|
|
SYNTAX QoSPortEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Definition of QoS Port"
|
||
|
|
INDEX {
|
||
|
|
alaQoSPortSlot,
|
||
|
|
alaQoSPortPort
|
||
|
|
}
|
||
|
|
::= { alaQoSPortTable 1 }
|
||
|
|
|
||
|
|
QoSPortEntry ::=
|
||
|
|
SEQUENCE
|
||
|
|
{
|
||
|
|
alaQoSPortSlot Integer32,
|
||
|
|
alaQoSPortPort Integer32,
|
||
|
|
alaQoSPortEnabled INTEGER,
|
||
|
|
alaQoSPortAppliedEnabled INTEGER,
|
||
|
|
alaQoSPortInterfaceType INTEGER,
|
||
|
|
alaQoSPortTrusted INTEGER,
|
||
|
|
alaQoSPortDefault8021p Integer32,
|
||
|
|
alaQoSPortDefaultDSCP Integer32,
|
||
|
|
alaQoSPortMaximumReservedBandwidth Integer32,
|
||
|
|
alaQoSPortMaximumReservedBandwidthStatus INTEGER,
|
||
|
|
alaQoSPortAppliedMaximumReservedBandwidth Integer32,
|
||
|
|
alaQoSPortAppliedMaximumReservedBandwidthStatus INTEGER,
|
||
|
|
alaQoSPortMaximumSignalledBandwidth Integer32,
|
||
|
|
alaQoSPortMaximumSignalledBandwidthStatus INTEGER,
|
||
|
|
alaQoSPortAppliedMaximumSignalledBandwidth Integer32,
|
||
|
|
alaQoSPortAppliedMaximumSignalledBandwidthStatus INTEGER,
|
||
|
|
alaQoSPortDefaultQueues Integer32,
|
||
|
|
alaQoSPortAppliedDefaultQueues Integer32,
|
||
|
|
alaQoSPortMaximumDefaultBandwidth Integer32,
|
||
|
|
alaQoSPortMaximumDefaultBandwidthStatus INTEGER,
|
||
|
|
alaQoSPortAppliedMaximumDefaultBandwidth Integer32,
|
||
|
|
alaQoSPortAppliedMaximumDefaultBandwidthStatus INTEGER,
|
||
|
|
alaQoSPortMaximumDefaultDepth Integer32,
|
||
|
|
alaQoSPortMaximumDefaultDepthStatus INTEGER,
|
||
|
|
alaQoSPortAppliedMaximumDefaultDepth Integer32,
|
||
|
|
alaQoSPortAppliedMaximumDefaultDepthStatus INTEGER,
|
||
|
|
alaQoSPortMaximumDefaultBuffers Integer32,
|
||
|
|
alaQoSPortMaximumDefaultBuffersStatus INTEGER,
|
||
|
|
alaQoSPortAppliedMaximumDefaultBuffers Integer32,
|
||
|
|
alaQoSPortAppliedMaximumDefaultBuffersStatus INTEGER,
|
||
|
|
alaQoSPortReset INTEGER,
|
||
|
|
alaQoSPortPhysicalBandwidth Integer32,
|
||
|
|
alaQoSPortReservedBandwidth Integer32,
|
||
|
|
alaQoSPortSignalledBandwidth Integer32,
|
||
|
|
alaQoSPortCurrentBandwidth Integer32,
|
||
|
|
alaQoSPortDefaultQidLow Integer32,
|
||
|
|
alaQoSPortDefaultQidMedium Integer32,
|
||
|
|
alaQoSPortDefaultQidHigh Integer32,
|
||
|
|
alaQoSPortDefaultQidUrgent Integer32,
|
||
|
|
alaQoSPortFloodQid Integer32,
|
||
|
|
alaQoSPortQueues Integer32,
|
||
|
|
alaQoSPortQueuesCreated Integer32,
|
||
|
|
alaQoSPortQueuesFailed Integer32,
|
||
|
|
alaQoSPortQueuesPreempted Integer32,
|
||
|
|
alaQoSPortRowStatus RowStatus,
|
||
|
|
alaQoSPortFirPrio0EnqBytes Counter64,
|
||
|
|
alaQoSPortFirPrio0DeqBytes Counter64,
|
||
|
|
alaQoSPortFirPrio0EnqPkts Counter64,
|
||
|
|
alaQoSPortFirPrio0DeqPkts Counter64,
|
||
|
|
alaQoSPortFirPrio0QidDiscardPkts Counter64,
|
||
|
|
alaQoSPortFirPrio0WredDiscardPkts Counter64,
|
||
|
|
alaQoSPortFirPrio0OverflowDiscardPkts Counter64,
|
||
|
|
alaQoSPortFirPrio1EnqBytes Counter64,
|
||
|
|
alaQoSPortFirPrio1DeqBytes Counter64,
|
||
|
|
alaQoSPortFirPrio1EnqPkts Counter64,
|
||
|
|
alaQoSPortFirPrio1DeqPkts Counter64,
|
||
|
|
alaQoSPortFirPrio1QidDiscardPkts Counter64,
|
||
|
|
alaQoSPortFirPrio1WredDiscardPkts Counter64,
|
||
|
|
alaQoSPortFirPrio1OverflowDiscardPkts Counter64,
|
||
|
|
alaQoSPortFirPrio2EnqBytes Counter64,
|
||
|
|
alaQoSPortFirPrio2DeqBytes Counter64,
|
||
|
|
alaQoSPortFirPrio2EnqPkts Counter64,
|
||
|
|
alaQoSPortFirPrio2DeqPkts Counter64,
|
||
|
|
alaQoSPortFirPrio2QidDiscardPkts Counter64,
|
||
|
|
alaQoSPortFirPrio2WredDiscardPkts Counter64,
|
||
|
|
alaQoSPortFirPrio2OverflowDiscardPkts Counter64,
|
||
|
|
alaQoSPortFirPrio3EnqBytes Counter64,
|
||
|
|
alaQoSPortFirPrio3DeqBytes Counter64,
|
||
|
|
alaQoSPortFirPrio3EnqPkts Counter64,
|
||
|
|
alaQoSPortFirPrio3DeqPkts Counter64,
|
||
|
|
alaQoSPortFirPrio3QidDiscardPkts Counter64,
|
||
|
|
alaQoSPortFirPrio3WredDiscardPkts Counter64,
|
||
|
|
alaQoSPortFirPrio3OverflowDiscardPkts Counter64,
|
||
|
|
alaQoSPortDefaultClassification INTEGER,
|
||
|
|
alaQoSPortLowPriorityWeight Integer32,
|
||
|
|
alaQoSPortMediumPriorityWeight Integer32,
|
||
|
|
alaQoSPortHighPriorityWeight Integer32,
|
||
|
|
alaQoSPortUrgentPriorityWeight Integer32,
|
||
|
|
alaQoSPortMaximumBandwidth Integer32,
|
||
|
|
alaQoSPortMaximumBandwidthStatus INTEGER,
|
||
|
|
alaQoSPortEnqueuingThresholdP0Lower Integer32,
|
||
|
|
alaQoSPortEnqueuingThresholdP0Upper Integer32,
|
||
|
|
alaQoSPortEnqueuingThresholdP1Lower Integer32,
|
||
|
|
alaQoSPortEnqueuingThresholdP1Upper Integer32,
|
||
|
|
alaQoSPortEnqueuingThresholdP2Lower Integer32,
|
||
|
|
alaQoSPortEnqueuingThresholdP2Upper Integer32,
|
||
|
|
alaQoSPortEnqueuingThresholdP3Lower Integer32,
|
||
|
|
alaQoSPortEnqueuingThresholdP3Upper Integer32,
|
||
|
|
alaQoSPortEnqueuingThresholdStatus INTEGER,
|
||
|
|
alaQoSPortServicingMode INTEGER,
|
||
|
|
alaQoSPortHighDensity INTEGER,
|
||
|
|
alaQoSPortFreeFFPRules Integer32,
|
||
|
|
alaQoSPortUsedFFPRules Integer32,
|
||
|
|
alaQoSPortFreeFFPMasks Integer32,
|
||
|
|
alaQoSPortUsedFFPMasks Integer32,
|
||
|
|
alaQoSPortSpoofedCount Integer32,
|
||
|
|
alaQoSPortNonSpoofedCount Integer32,
|
||
|
|
alaQoSPortQ4PriorityWeight Integer32,
|
||
|
|
alaQoSPortQ5PriorityWeight Integer32,
|
||
|
|
alaQoSPortQ6PriorityWeight Integer32,
|
||
|
|
alaQoSPortQ7PriorityWeight Integer32,
|
||
|
|
alaQoSPortCOS0MaximumBandwidth Integer32,
|
||
|
|
alaQoSPortCOS0MaximumBandwidthStatus INTEGER,
|
||
|
|
alaQoSPortCOS1MaximumBandwidth Integer32,
|
||
|
|
alaQoSPortCOS1MaximumBandwidthStatus INTEGER,
|
||
|
|
alaQoSPortCOS2MaximumBandwidth Integer32,
|
||
|
|
alaQoSPortCOS2MaximumBandwidthStatus INTEGER,
|
||
|
|
alaQoSPortCOS3MaximumBandwidth Integer32,
|
||
|
|
alaQoSPortCOS3MaximumBandwidthStatus INTEGER,
|
||
|
|
alaQoSPortCOS4MaximumBandwidth Integer32,
|
||
|
|
alaQoSPortCOS4MaximumBandwidthStatus INTEGER,
|
||
|
|
alaQoSPortCOS5MaximumBandwidth Integer32,
|
||
|
|
alaQoSPortCOS5MaximumBandwidthStatus INTEGER,
|
||
|
|
alaQoSPortCOS6MaximumBandwidth Integer32,
|
||
|
|
alaQoSPortCOS6MaximumBandwidthStatus INTEGER,
|
||
|
|
alaQoSPortCOS7MaximumBandwidth Integer32,
|
||
|
|
alaQoSPortCOS7MaximumBandwidthStatus INTEGER,
|
||
|
|
alaQoSPortCOS0MinimumBandwidth Integer32,
|
||
|
|
alaQoSPortCOS0MinimumBandwidthStatus INTEGER,
|
||
|
|
alaQoSPortCOS1MinimumBandwidth Integer32,
|
||
|
|
alaQoSPortCOS1MinimumBandwidthStatus INTEGER,
|
||
|
|
alaQoSPortCOS2MinimumBandwidth Integer32,
|
||
|
|
alaQoSPortCOS2MinimumBandwidthStatus INTEGER,
|
||
|
|
alaQoSPortCOS3MinimumBandwidth Integer32,
|
||
|
|
alaQoSPortCOS3MinimumBandwidthStatus INTEGER,
|
||
|
|
alaQoSPortCOS4MinimumBandwidth Integer32,
|
||
|
|
alaQoSPortCOS4MinimumBandwidthStatus INTEGER,
|
||
|
|
alaQoSPortCOS5MinimumBandwidth Integer32,
|
||
|
|
alaQoSPortCOS5MinimumBandwidthStatus INTEGER,
|
||
|
|
alaQoSPortCOS6MinimumBandwidth Integer32,
|
||
|
|
alaQoSPortCOS6MinimumBandwidthStatus INTEGER,
|
||
|
|
alaQoSPortCOS7MinimumBandwidth Integer32,
|
||
|
|
alaQoSPortCOS7MinimumBandwidthStatus INTEGER,
|
||
|
|
alaQoSPortMaximumIngBandwidth Integer32,
|
||
|
|
alaQoSPortMaximumIngBandwidthStatus INTEGER,
|
||
|
|
alaQoSPortDEIMarking INTEGER,
|
||
|
|
alaQoSPortMonitor INTEGER,
|
||
|
|
alaQoSPortDEIMapping INTEGER
|
||
|
|
}
|
||
|
|
|
||
|
|
alaQoSPortSlot OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..16)
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Physical slot port resides on"
|
||
|
|
::= { alaQoSPortEntry 1 }
|
||
|
|
|
||
|
|
alaQoSPortPort OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..52)
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Physical port number"
|
||
|
|
::= { alaQoSPortEntry 2 }
|
||
|
|
|
||
|
|
alaQoSPortEnabled OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable (1),
|
||
|
|
disable (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Pending QoS enable status for the physical port
|
||
|
|
Does not take effect until an 'Apply' command is issued"
|
||
|
|
DEFVAL { enable }
|
||
|
|
::= { alaQoSPortEntry 3 }
|
||
|
|
|
||
|
|
alaQoSPortAppliedEnabled OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable (1),
|
||
|
|
disable (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Current QoS enable status for the physical port
|
||
|
|
"
|
||
|
|
::= { alaQoSPortEntry 4 }
|
||
|
|
|
||
|
|
alaQoSPortInterfaceType OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
ethernet (1),
|
||
|
|
wan (2),
|
||
|
|
ethernet10 (3),
|
||
|
|
ethernet100 (4),
|
||
|
|
ethernet1G (5),
|
||
|
|
ethernet10G (6),
|
||
|
|
aggregate (7)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The type of interface QoS matches for this physical port"
|
||
|
|
::= { alaQoSPortEntry 5 }
|
||
|
|
|
||
|
|
alaQoSPortTrusted OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
yes (1),
|
||
|
|
no (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status of trusting 802.1p/TOS/DSCP values.
|
||
|
|
When trusted, 802.1p/DSCP values in the packet are passed
|
||
|
|
through the switch. When untrusted, 802.1p/DSCP values are set
|
||
|
|
to the port defaults."
|
||
|
|
DEFVAL { no }
|
||
|
|
::= { alaQoSPortEntry 6 }
|
||
|
|
|
||
|
|
alaQoSPortDefault8021p OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..7)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "802.1p priority value to use for untagged frames arriving on
|
||
|
|
the port and tagged frames when the port is untrusted."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { alaQoSPortEntry 7 }
|
||
|
|
|
||
|
|
alaQoSPortDefaultDSCP OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..63)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "DSCP value to stamp in frames arriving on the port when the port
|
||
|
|
is untrusted"
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { alaQoSPortEntry 8 }
|
||
|
|
|
||
|
|
alaQoSPortMaximumReservedBandwidth OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Pending maximum reservable bandwidth on the port.
|
||
|
|
Policies can reserve up to this much bandwidth.
|
||
|
|
Does not take effect until an 'Apply' is issued"
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { alaQoSPortEntry 9 }
|
||
|
|
|
||
|
|
alaQoSPortMaximumReservedBandwidthStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Pending status field indicating whether to enforce
|
||
|
|
maximum reservable bandwidth on next 'Apply'"
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSPortEntry 10 }
|
||
|
|
|
||
|
|
alaQoSPortAppliedMaximumReservedBandwidth OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Current maximum reservable bandwidth on the port.
|
||
|
|
Policies can reserve up to this much bandwidth.
|
||
|
|
"
|
||
|
|
::= { alaQoSPortEntry 11 }
|
||
|
|
|
||
|
|
alaQoSPortAppliedMaximumReservedBandwidthStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Current status field indicating whether to enforce
|
||
|
|
maximum reservable bandwidth."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSPortEntry 12 }
|
||
|
|
|
||
|
|
alaQoSPortMaximumSignalledBandwidth OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Pending maximum signalled bandwidth on the port.
|
||
|
|
Signalling protocols can reserve up to this much bandwidth.
|
||
|
|
Does not take effect until an 'Apply' is issued"
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { alaQoSPortEntry 13 }
|
||
|
|
|
||
|
|
alaQoSPortMaximumSignalledBandwidthStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Pending status field indicating whether to enforce
|
||
|
|
maximum signalled bandwidth on next 'Apply'"
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSPortEntry 14 }
|
||
|
|
|
||
|
|
alaQoSPortAppliedMaximumSignalledBandwidth OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Current maximum signalled bandwidth on the port.
|
||
|
|
Signalling protocols can reserve up to this much bandwidth.
|
||
|
|
"
|
||
|
|
::= { alaQoSPortEntry 15 }
|
||
|
|
|
||
|
|
alaQoSPortAppliedMaximumSignalledBandwidthStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Current status field indicating whether to enforce
|
||
|
|
maximum signalled bandwidth."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSPortEntry 16 }
|
||
|
|
|
||
|
|
alaQoSPortDefaultQueues OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (8..8)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Pending number of default queues for the port
|
||
|
|
Overrides any switch-wide default queue setting"
|
||
|
|
DEFVAL { 8 }
|
||
|
|
::= { alaQoSPortEntry 17 }
|
||
|
|
|
||
|
|
alaQoSPortAppliedDefaultQueues OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (8..8)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Current number of default queues for the port
|
||
|
|
Overrides any switch-wide default queue setting"
|
||
|
|
::= { alaQoSPortEntry 18 }
|
||
|
|
|
||
|
|
alaQoSPortMaximumDefaultBandwidth OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Pending maximum default bandwidth (Kbits/sec).
|
||
|
|
Maximum rate for default queues on this port
|
||
|
|
Does not take effect until an 'Apply' command is issued"
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { alaQoSPortEntry 19 }
|
||
|
|
|
||
|
|
alaQoSPortMaximumDefaultBandwidthStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Pending status field indicating whether to enforce
|
||
|
|
maximum default bandwidth on next 'Apply'"
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSPortEntry 20 }
|
||
|
|
|
||
|
|
alaQoSPortAppliedMaximumDefaultBandwidth OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Current maximum default bandwidth (Kbits/sec).
|
||
|
|
Maximum rate for default queues this port
|
||
|
|
"
|
||
|
|
::= { alaQoSPortEntry 21 }
|
||
|
|
|
||
|
|
alaQoSPortAppliedMaximumDefaultBandwidthStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Current status field indicating whether to enforce
|
||
|
|
maximum default bandwidth."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSPortEntry 22 }
|
||
|
|
|
||
|
|
alaQoSPortMaximumDefaultDepth OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Pending maximum depth of egress queues (Kbytes).
|
||
|
|
Maximum depth of queues on this port
|
||
|
|
Does not take effect until an 'Apply' command is issued"
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { alaQoSPortEntry 23 }
|
||
|
|
|
||
|
|
alaQoSPortMaximumDefaultDepthStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Pending status field indicating whether to enforce
|
||
|
|
maximum depth on next 'Apply'"
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSPortEntry 24 }
|
||
|
|
|
||
|
|
alaQoSPortAppliedMaximumDefaultDepth OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Current maximum depth of egress queues (Kbytes).
|
||
|
|
Maximum depth of queues on this port
|
||
|
|
"
|
||
|
|
::= { alaQoSPortEntry 25 }
|
||
|
|
|
||
|
|
alaQoSPortAppliedMaximumDefaultDepthStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Current status field indicating whether to enforce
|
||
|
|
maximum depth."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSPortEntry 26 }
|
||
|
|
|
||
|
|
alaQoSPortMaximumDefaultBuffers OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Pending maximum buffers for egress queues.
|
||
|
|
Maximum number of buffers for queues on this port
|
||
|
|
Does not take effect until an 'Apply' command is issued"
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { alaQoSPortEntry 27 }
|
||
|
|
|
||
|
|
alaQoSPortMaximumDefaultBuffersStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Pending status field indicating whether to enforce
|
||
|
|
maximum buffers on next 'Apply'"
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSPortEntry 28 }
|
||
|
|
|
||
|
|
alaQoSPortAppliedMaximumDefaultBuffers OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Current maximum buffers for egress queues.
|
||
|
|
Maximum number of buffers for queues on this port
|
||
|
|
"
|
||
|
|
::= { alaQoSPortEntry 29 }
|
||
|
|
|
||
|
|
alaQoSPortAppliedMaximumDefaultBuffersStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Current status field indicating whether to enforce
|
||
|
|
maximum buffers."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSPortEntry 30 }
|
||
|
|
|
||
|
|
alaQoSPortReset OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
yes (1),
|
||
|
|
no (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Reset all QoS parameters to default values"
|
||
|
|
DEFVAL { no }
|
||
|
|
::= { alaQoSPortEntry 31 }
|
||
|
|
|
||
|
|
alaQoSPortPhysicalBandwidth OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Physical bandwidth of port (Kbit/sec)"
|
||
|
|
::= { alaQoSPortEntry 32 }
|
||
|
|
|
||
|
|
alaQoSPortReservedBandwidth OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Bandwidth reserved by policies on port (Kbit/sec)"
|
||
|
|
::= { alaQoSPortEntry 33 }
|
||
|
|
|
||
|
|
alaQoSPortSignalledBandwidth OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Bandwidth reserved by signalling on port (Kbit/sec)"
|
||
|
|
::= { alaQoSPortEntry 34 }
|
||
|
|
|
||
|
|
alaQoSPortCurrentBandwidth OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Current measured bandwidth of port (Kbits/sec)"
|
||
|
|
::= { alaQoSPortEntry 35 }
|
||
|
|
|
||
|
|
alaQoSPortDefaultQidLow OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Default low queue ID"
|
||
|
|
::= { alaQoSPortEntry 36 }
|
||
|
|
|
||
|
|
alaQoSPortDefaultQidMedium OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Default medium queue ID"
|
||
|
|
::= { alaQoSPortEntry 37 }
|
||
|
|
|
||
|
|
alaQoSPortDefaultQidHigh OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Default high queue ID"
|
||
|
|
::= { alaQoSPortEntry 38 }
|
||
|
|
|
||
|
|
alaQoSPortDefaultQidUrgent OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Default urgent queue ID"
|
||
|
|
::= { alaQoSPortEntry 39 }
|
||
|
|
|
||
|
|
alaQoSPortFloodQid OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "ID of the flood queue"
|
||
|
|
::= { alaQoSPortEntry 40 }
|
||
|
|
|
||
|
|
alaQoSPortQueues OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Number of queues currently on the port"
|
||
|
|
::= { alaQoSPortEntry 41 }
|
||
|
|
|
||
|
|
alaQoSPortQueuesCreated OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Number of queue requests on the port"
|
||
|
|
::= { alaQoSPortEntry 42 }
|
||
|
|
|
||
|
|
alaQoSPortQueuesFailed OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Number of queue requests that failed on the port"
|
||
|
|
::= { alaQoSPortEntry 43 }
|
||
|
|
|
||
|
|
alaQoSPortQueuesPreempted OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Number of queues preempted on the port"
|
||
|
|
::= { alaQoSPortEntry 44 }
|
||
|
|
|
||
|
|
alaQoSPortRowStatus OBJECT-TYPE
|
||
|
|
SYNTAX RowStatus
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Used to create/delete ports according to the
|
||
|
|
RowStatus convention"
|
||
|
|
::= { alaQoSPortEntry 45 }
|
||
|
|
|
||
|
|
alaQoSPortFirPrio0EnqBytes OBJECT-TYPE
|
||
|
|
SYNTAX Counter64
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Firenze priority 0 enqueue byte count"
|
||
|
|
::= { alaQoSPortEntry 46 }
|
||
|
|
|
||
|
|
alaQoSPortFirPrio0DeqBytes OBJECT-TYPE
|
||
|
|
SYNTAX Counter64
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Firenze priority 0 dequeue byte count"
|
||
|
|
::= { alaQoSPortEntry 47 }
|
||
|
|
|
||
|
|
alaQoSPortFirPrio0EnqPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter64
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Firenze priority 0 enqueue packet count"
|
||
|
|
::= { alaQoSPortEntry 48 }
|
||
|
|
|
||
|
|
alaQoSPortFirPrio0DeqPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter64
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Firenze priority 0 dequeue packet count"
|
||
|
|
::= { alaQoSPortEntry 49 }
|
||
|
|
|
||
|
|
alaQoSPortFirPrio0QidDiscardPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter64
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Firenze priority 0 QID discard packet count"
|
||
|
|
::= { alaQoSPortEntry 50 }
|
||
|
|
|
||
|
|
alaQoSPortFirPrio0WredDiscardPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter64
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Firenze priority 0 WRED discard packet count"
|
||
|
|
::= { alaQoSPortEntry 51 }
|
||
|
|
|
||
|
|
alaQoSPortFirPrio0OverflowDiscardPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter64
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Firenze priority 0 overflow discard packet count"
|
||
|
|
::= { alaQoSPortEntry 52 }
|
||
|
|
|
||
|
|
alaQoSPortFirPrio1EnqBytes OBJECT-TYPE
|
||
|
|
SYNTAX Counter64
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Firenze priority 1 enqueue byte count"
|
||
|
|
::= { alaQoSPortEntry 53 }
|
||
|
|
|
||
|
|
alaQoSPortFirPrio1DeqBytes OBJECT-TYPE
|
||
|
|
SYNTAX Counter64
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Firenze priority 1 dequeue byte count"
|
||
|
|
::= { alaQoSPortEntry 54 }
|
||
|
|
|
||
|
|
alaQoSPortFirPrio1EnqPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter64
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Firenze priority 1 enqueue packet count"
|
||
|
|
::= { alaQoSPortEntry 55 }
|
||
|
|
|
||
|
|
alaQoSPortFirPrio1DeqPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter64
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Firenze priority 1 dequeue packet count"
|
||
|
|
::= { alaQoSPortEntry 56 }
|
||
|
|
|
||
|
|
alaQoSPortFirPrio1QidDiscardPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter64
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Firenze priority 1 QID discard packet count"
|
||
|
|
::= { alaQoSPortEntry 57 }
|
||
|
|
|
||
|
|
alaQoSPortFirPrio1WredDiscardPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter64
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Firenze priority 1 WRED discard packet count"
|
||
|
|
::= { alaQoSPortEntry 58 }
|
||
|
|
|
||
|
|
alaQoSPortFirPrio1OverflowDiscardPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter64
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Firenze priority 1 overflow discard packet count"
|
||
|
|
::= { alaQoSPortEntry 59 }
|
||
|
|
|
||
|
|
alaQoSPortFirPrio2EnqBytes OBJECT-TYPE
|
||
|
|
SYNTAX Counter64
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Firenze priority 2 enqueue byte count"
|
||
|
|
::= { alaQoSPortEntry 60 }
|
||
|
|
|
||
|
|
alaQoSPortFirPrio2DeqBytes OBJECT-TYPE
|
||
|
|
SYNTAX Counter64
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Firenze priority 2 dequeue byte count"
|
||
|
|
::= { alaQoSPortEntry 61 }
|
||
|
|
|
||
|
|
alaQoSPortFirPrio2EnqPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter64
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Firenze priority 2 enqueue packet count"
|
||
|
|
::= { alaQoSPortEntry 62 }
|
||
|
|
|
||
|
|
alaQoSPortFirPrio2DeqPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter64
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Firenze priority 2 dequeue packet count"
|
||
|
|
::= { alaQoSPortEntry 63 }
|
||
|
|
|
||
|
|
alaQoSPortFirPrio2QidDiscardPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter64
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Firenze priority 2 QID discard packet count"
|
||
|
|
::= { alaQoSPortEntry 64 }
|
||
|
|
|
||
|
|
alaQoSPortFirPrio2WredDiscardPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter64
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Firenze priority 2 WRED discard packet count"
|
||
|
|
::= { alaQoSPortEntry 65 }
|
||
|
|
|
||
|
|
alaQoSPortFirPrio2OverflowDiscardPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter64
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Firenze priority 2 overflow discard packet count"
|
||
|
|
::= { alaQoSPortEntry 66 }
|
||
|
|
|
||
|
|
alaQoSPortFirPrio3EnqBytes OBJECT-TYPE
|
||
|
|
SYNTAX Counter64
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Firenze priority 3 enqueue byte count"
|
||
|
|
::= { alaQoSPortEntry 67 }
|
||
|
|
|
||
|
|
alaQoSPortFirPrio3DeqBytes OBJECT-TYPE
|
||
|
|
SYNTAX Counter64
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Firenze priority 3 dequeue byte count"
|
||
|
|
::= { alaQoSPortEntry 68 }
|
||
|
|
|
||
|
|
alaQoSPortFirPrio3EnqPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter64
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Firenze priority 3 enqueue packet count"
|
||
|
|
::= { alaQoSPortEntry 69 }
|
||
|
|
|
||
|
|
alaQoSPortFirPrio3DeqPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter64
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Firenze priority 3 dequeue packet count"
|
||
|
|
::= { alaQoSPortEntry 70 }
|
||
|
|
|
||
|
|
alaQoSPortFirPrio3QidDiscardPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter64
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Firenze priority 3 QID discard packet count"
|
||
|
|
::= { alaQoSPortEntry 71 }
|
||
|
|
|
||
|
|
alaQoSPortFirPrio3WredDiscardPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter64
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Firenze priority 3 WRED discard packet count"
|
||
|
|
::= { alaQoSPortEntry 72 }
|
||
|
|
|
||
|
|
alaQoSPortFirPrio3OverflowDiscardPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter64
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Firenze priority 3 overflow discard packet count"
|
||
|
|
::= { alaQoSPortEntry 73 }
|
||
|
|
|
||
|
|
alaQoSPortDefaultClassification OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
b8021p (1),
|
||
|
|
tos (2),
|
||
|
|
dscp (3)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Ingress traffic classification parameter for Firenze port
|
||
|
|
What field to interpret as priority for WRED"
|
||
|
|
DEFVAL { tos }
|
||
|
|
::= { alaQoSPortEntry 74 }
|
||
|
|
|
||
|
|
alaQoSPortLowPriorityWeight OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..15)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Weight to use for low priority egress queue on fixed queue blades."
|
||
|
|
DEFVAL { 1 }
|
||
|
|
::= { alaQoSPortEntry 75 }
|
||
|
|
|
||
|
|
alaQoSPortMediumPriorityWeight OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..15)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Weight to use for medium priority egress queue on fixed queue blades."
|
||
|
|
DEFVAL { 1 }
|
||
|
|
::= { alaQoSPortEntry 76 }
|
||
|
|
|
||
|
|
alaQoSPortHighPriorityWeight OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..15)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Weight to use for high priority egress queue on fixed queue blades."
|
||
|
|
DEFVAL { 1 }
|
||
|
|
::= { alaQoSPortEntry 77 }
|
||
|
|
|
||
|
|
alaQoSPortUrgentPriorityWeight OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..15)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Weight to use for urgent priority egress queue on fixed queue blades."
|
||
|
|
DEFVAL { 1 }
|
||
|
|
::= { alaQoSPortEntry 78 }
|
||
|
|
|
||
|
|
alaQoSPortMaximumBandwidth OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Maximum egress bandwidth (Kbits/sec).
|
||
|
|
Maximum rate to send traffic out this port"
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { alaQoSPortEntry 79 }
|
||
|
|
|
||
|
|
alaQoSPortMaximumBandwidthStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether to enforce
|
||
|
|
maximum bandwidth on port."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSPortEntry 80 }
|
||
|
|
|
||
|
|
alaQoSPortEnqueuingThresholdP0Lower OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..4095)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Priority 0 FIFO lower threshold for high density module"
|
||
|
|
DEFVAL { 10 }
|
||
|
|
::= { alaQoSPortEntry 81 }
|
||
|
|
|
||
|
|
alaQoSPortEnqueuingThresholdP0Upper OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..4095)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Priority 0 FIFO upper threshold for high density module"
|
||
|
|
DEFVAL { 30 }
|
||
|
|
::= { alaQoSPortEntry 82 }
|
||
|
|
|
||
|
|
alaQoSPortEnqueuingThresholdP1Lower OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..4095)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Priority 1 FIFO lower threshold for high density module"
|
||
|
|
DEFVAL { 10 }
|
||
|
|
::= { alaQoSPortEntry 83 }
|
||
|
|
|
||
|
|
alaQoSPortEnqueuingThresholdP1Upper OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..4095)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Priority 1 FIFO upper threshold for high density module"
|
||
|
|
DEFVAL { 35 }
|
||
|
|
::= { alaQoSPortEntry 84 }
|
||
|
|
|
||
|
|
alaQoSPortEnqueuingThresholdP2Lower OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..4095)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Priority 2 FIFO lower threshold for high density module"
|
||
|
|
DEFVAL { 10 }
|
||
|
|
::= { alaQoSPortEntry 85 }
|
||
|
|
|
||
|
|
alaQoSPortEnqueuingThresholdP2Upper OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..4095)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Priority 2 FIFO upper threshold for high density module"
|
||
|
|
DEFVAL { 40 }
|
||
|
|
::= { alaQoSPortEntry 86 }
|
||
|
|
|
||
|
|
alaQoSPortEnqueuingThresholdP3Lower OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..4095)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Priority 3 FIFO lower threshold for high density module"
|
||
|
|
DEFVAL { 260 }
|
||
|
|
::= { alaQoSPortEntry 87 }
|
||
|
|
|
||
|
|
alaQoSPortEnqueuingThresholdP3Upper OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..4095)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Priority 3 FIFO upper threshold for high density module"
|
||
|
|
DEFVAL { 575 }
|
||
|
|
::= { alaQoSPortEntry 88 }
|
||
|
|
|
||
|
|
alaQoSPortEnqueuingThresholdStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether enqueuing thresholds need
|
||
|
|
to be enforced on high density module."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSPortEntry 89 }
|
||
|
|
|
||
|
|
alaQoSPortHighDensity OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
yes (1),
|
||
|
|
no (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Indicates whether this is a high-density port or not."
|
||
|
|
::= { alaQoSPortEntry 90 }
|
||
|
|
|
||
|
|
|
||
|
|
alaQoSPortServicingMode OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
default (0),
|
||
|
|
strictpriority (1),
|
||
|
|
prioritywrr (2),
|
||
|
|
wrr (3),
|
||
|
|
drr (4)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Servicing mode for the port"
|
||
|
|
DEFVAL { default }
|
||
|
|
::= { alaQoSPortEntry 91 }
|
||
|
|
|
||
|
|
alaQoSPortFreeFFPRules OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Number of Free FPP rule entries"
|
||
|
|
::= { alaQoSPortEntry 92 }
|
||
|
|
|
||
|
|
alaQoSPortUsedFFPRules OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Number of Used FPP rule entries"
|
||
|
|
::= { alaQoSPortEntry 93 }
|
||
|
|
|
||
|
|
alaQoSPortFreeFFPMasks OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Number of Free FPP mask entries"
|
||
|
|
::= { alaQoSPortEntry 94 }
|
||
|
|
|
||
|
|
alaQoSPortUsedFFPMasks OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Number of Free FPP mask enries"
|
||
|
|
::= { alaQoSPortEntry 95 }
|
||
|
|
|
||
|
|
alaQoSPortSpoofedCount OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Spoofed packet count"
|
||
|
|
::= { alaQoSPortEntry 96 }
|
||
|
|
|
||
|
|
alaQoSPortNonSpoofedCount OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Non-spoofed packet count"
|
||
|
|
::= { alaQoSPortEntry 97 }
|
||
|
|
|
||
|
|
alaQoSPortQ4PriorityWeight OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..15)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Weight to use for cos queue 4."
|
||
|
|
DEFVAL { 1 }
|
||
|
|
::= { alaQoSPortEntry 98 }
|
||
|
|
|
||
|
|
alaQoSPortQ5PriorityWeight OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..15)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Weight to use for cos queue 5."
|
||
|
|
DEFVAL { 1 }
|
||
|
|
::= { alaQoSPortEntry 99 }
|
||
|
|
|
||
|
|
alaQoSPortQ6PriorityWeight OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..15)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Weight to use for cos queue 6."
|
||
|
|
DEFVAL { 1 }
|
||
|
|
::= { alaQoSPortEntry 100 }
|
||
|
|
|
||
|
|
alaQoSPortQ7PriorityWeight OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..15)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Weight to use for cos queue 7."
|
||
|
|
DEFVAL { 1 }
|
||
|
|
::= { alaQoSPortEntry 101 }
|
||
|
|
|
||
|
|
alaQoSPortCOS0MaximumBandwidth OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Maximum egress bandwidth (Kbits/sec).
|
||
|
|
Maximum rate to send traffic out this queue"
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { alaQoSPortEntry 102 }
|
||
|
|
|
||
|
|
alaQoSPortCOS0MaximumBandwidthStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether to enforce
|
||
|
|
maximum bandwidth on queue."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSPortEntry 103 }
|
||
|
|
|
||
|
|
alaQoSPortCOS1MaximumBandwidth OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Maximum egress bandwidth (Kbits/sec).
|
||
|
|
Maximum rate to send traffic out this queue"
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { alaQoSPortEntry 104 }
|
||
|
|
|
||
|
|
alaQoSPortCOS1MaximumBandwidthStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether to enforce
|
||
|
|
maximum bandwidth on queue."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSPortEntry 105 }
|
||
|
|
|
||
|
|
alaQoSPortCOS2MaximumBandwidth OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Maximum egress bandwidth (Kbits/sec).
|
||
|
|
Maximum rate to send traffic out this queue"
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { alaQoSPortEntry 106 }
|
||
|
|
|
||
|
|
alaQoSPortCOS2MaximumBandwidthStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether to enforce
|
||
|
|
maximum bandwidth on queue."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSPortEntry 107 }
|
||
|
|
|
||
|
|
alaQoSPortCOS3MaximumBandwidth OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Maximum egress bandwidth (Kbits/sec).
|
||
|
|
Maximum rate to send traffic out this queue"
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { alaQoSPortEntry 108 }
|
||
|
|
|
||
|
|
alaQoSPortCOS3MaximumBandwidthStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether to enforce
|
||
|
|
maximum bandwidth on queue."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSPortEntry 109 }
|
||
|
|
|
||
|
|
alaQoSPortCOS4MaximumBandwidth OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Maximum egress bandwidth (Kbits/sec).
|
||
|
|
Maximum rate to send traffic out this queue"
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { alaQoSPortEntry 110 }
|
||
|
|
|
||
|
|
alaQoSPortCOS4MaximumBandwidthStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether to enforce
|
||
|
|
maximum bandwidth on queue."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSPortEntry 111 }
|
||
|
|
|
||
|
|
alaQoSPortCOS5MaximumBandwidth OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Maximum egress bandwidth (Kbits/sec).
|
||
|
|
Maximum rate to send traffic out this queue"
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { alaQoSPortEntry 112 }
|
||
|
|
|
||
|
|
alaQoSPortCOS5MaximumBandwidthStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether to enforce
|
||
|
|
maximum bandwidth on queue."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSPortEntry 113 }
|
||
|
|
|
||
|
|
alaQoSPortCOS6MaximumBandwidth OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Maximum egress bandwidth (Kbits/sec).
|
||
|
|
Maximum rate to send traffic out this queue"
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { alaQoSPortEntry 114 }
|
||
|
|
|
||
|
|
alaQoSPortCOS6MaximumBandwidthStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether to enforce
|
||
|
|
maximum bandwidth on queue."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSPortEntry 115 }
|
||
|
|
|
||
|
|
alaQoSPortCOS7MaximumBandwidth OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Maximum egress bandwidth (Kbits/sec).
|
||
|
|
Maximum rate to send traffic out this queue"
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { alaQoSPortEntry 116 }
|
||
|
|
|
||
|
|
alaQoSPortCOS7MaximumBandwidthStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether to enforce
|
||
|
|
maximum bandwidth on queue."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSPortEntry 117 }
|
||
|
|
|
||
|
|
alaQoSPortCOS0MinimumBandwidth OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Minimum egress bandwidth (Kbits/sec).
|
||
|
|
Minimum rate to send traffic out this queue"
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { alaQoSPortEntry 118 }
|
||
|
|
|
||
|
|
alaQoSPortCOS0MinimumBandwidthStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether to enforce
|
||
|
|
minimum bandwidth on queue."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSPortEntry 119 }
|
||
|
|
|
||
|
|
alaQoSPortCOS1MinimumBandwidth OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Minimum egress bandwidth (Kbits/sec).
|
||
|
|
Minimum rate to send traffic out this queue"
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { alaQoSPortEntry 120 }
|
||
|
|
|
||
|
|
alaQoSPortCOS1MinimumBandwidthStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether to enforce
|
||
|
|
minimum bandwidth on queue."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSPortEntry 121 }
|
||
|
|
|
||
|
|
alaQoSPortCOS2MinimumBandwidth OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Minimum egress bandwidth (Kbits/sec).
|
||
|
|
Minimum rate to send traffic out this queue"
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { alaQoSPortEntry 122 }
|
||
|
|
|
||
|
|
alaQoSPortCOS2MinimumBandwidthStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether to enforce
|
||
|
|
minimum bandwidth on queue."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSPortEntry 123 }
|
||
|
|
|
||
|
|
alaQoSPortCOS3MinimumBandwidth OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Minimum egress bandwidth (Kbits/sec).
|
||
|
|
Minimum rate to send traffic out this queue"
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { alaQoSPortEntry 124 }
|
||
|
|
|
||
|
|
alaQoSPortCOS3MinimumBandwidthStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether to enforce
|
||
|
|
minimum bandwidth on queue."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSPortEntry 125 }
|
||
|
|
|
||
|
|
alaQoSPortCOS4MinimumBandwidth OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Minimum egress bandwidth (Kbits/sec).
|
||
|
|
Minimum rate to send traffic out this queue"
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { alaQoSPortEntry 126 }
|
||
|
|
|
||
|
|
alaQoSPortCOS4MinimumBandwidthStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether to enforce
|
||
|
|
minimum bandwidth on queue."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSPortEntry 127 }
|
||
|
|
|
||
|
|
alaQoSPortCOS5MinimumBandwidth OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Minimum egress bandwidth (Kbits/sec).
|
||
|
|
Minimum rate to send traffic out this queue"
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { alaQoSPortEntry 128 }
|
||
|
|
|
||
|
|
alaQoSPortCOS5MinimumBandwidthStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether to enforce
|
||
|
|
minimum bandwidth on queue."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSPortEntry 129 }
|
||
|
|
|
||
|
|
alaQoSPortCOS6MinimumBandwidth OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Minimum egress bandwidth (Kbits/sec).
|
||
|
|
Minimum rate to send traffic out this queue"
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { alaQoSPortEntry 130 }
|
||
|
|
|
||
|
|
alaQoSPortCOS6MinimumBandwidthStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether to enforce
|
||
|
|
minimum bandwidth on queue."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSPortEntry 131 }
|
||
|
|
|
||
|
|
alaQoSPortCOS7MinimumBandwidth OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Minimum egress bandwidth (Kbits/sec).
|
||
|
|
Minimum rate to send traffic out this queue"
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { alaQoSPortEntry 132 }
|
||
|
|
|
||
|
|
alaQoSPortCOS7MinimumBandwidthStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether to enforce
|
||
|
|
minimum bandwidth on queue."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSPortEntry 133 }
|
||
|
|
|
||
|
|
alaQoSPortMaximumIngBandwidth OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Maximum igress bandwidth (Kbits/sec).
|
||
|
|
Maximum rate to recieve traffic in on this port"
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { alaQoSPortEntry 134 }
|
||
|
|
|
||
|
|
alaQoSPortMaximumIngBandwidthStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether to enforce
|
||
|
|
maximum bandwidth on port."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSPortEntry 135 }
|
||
|
|
|
||
|
|
alaQoSPortDEIMarking OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "This object specifies if, in egress traffic, the DEI/CFI bit
|
||
|
|
will be set or not for the traffic which is not conformant to
|
||
|
|
SLA (Yellow color packets).
|
||
|
|
|
||
|
|
enabled(1) -- the DEI/CFI bit will be set in egress traffic.
|
||
|
|
disabled(2) -- the DEI/CFI bit will not be set in egress traffic."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSPortEntry 136 }
|
||
|
|
|
||
|
|
alaQoSPortMonitor OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "This object is used to monitor a slot/port on which user is interested
|
||
|
|
to get the cos egress statistics.
|
||
|
|
|
||
|
|
enabled(1) -- monitor the slot/port to gather per port cos egress
|
||
|
|
statistics.
|
||
|
|
disabled(2) -- reset the previously monitored slot/port."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSPortEntry 137 }
|
||
|
|
|
||
|
|
alaQoSPortDEIMapping OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "This object specifies if, in ingress traffic, the DEI/CFI bit
|
||
|
|
will be set or not for the traffic which is not conformant to
|
||
|
|
SLA (Yellow color packets).
|
||
|
|
|
||
|
|
enabled(1) -- the DEI/CFI bit will be set in ingress traffic.
|
||
|
|
disabled(2) -- the DEI/CFI bit will not be set in ingress traffic."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSPortEntry 138 }
|
||
|
|
|
||
|
|
--
|
||
|
|
-- Definition of config table
|
||
|
|
--
|
||
|
|
|
||
|
|
alaQoSConfig OBJECT IDENTIFIER ::= { alaQoSMIBObjects 30 }
|
||
|
|
|
||
|
|
alaQoSConfigEnabled OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable (1),
|
||
|
|
disable (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Is QoS enabled on the switch"
|
||
|
|
::= { alaQoSConfig 1 }
|
||
|
|
|
||
|
|
alaQoSConfigDefaultQueues OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (2..8)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Pending number of default queues to create for each port.
|
||
|
|
Can be overridden on a port by port basis. Does not take affect
|
||
|
|
until an 'Apply' command is issued."
|
||
|
|
::= { alaQoSConfig 2 }
|
||
|
|
|
||
|
|
alaQoSConfigAppliedDefaultQueues OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (2..8)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Number of default queues configured at last 'Apply' command."
|
||
|
|
::= { alaQoSConfig 3 }
|
||
|
|
|
||
|
|
alaQoSConfigTrustPorts OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
yes (1),
|
||
|
|
no (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Flag to indicate whether to trust the 802.1p/TOS values on
|
||
|
|
incoming traffic by default. Can be overridden on a port by
|
||
|
|
port basis."
|
||
|
|
::= { alaQoSConfig 4 }
|
||
|
|
|
||
|
|
alaQoSConfigFlowTimeout OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (2..3600)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Pending flow timeout (seconds). Flows are removed from
|
||
|
|
hardware/software if no traffic is seen for this many seconds.
|
||
|
|
Does not take effect until an 'Apply' command is issued"
|
||
|
|
::= { alaQoSConfig 5 }
|
||
|
|
|
||
|
|
alaQoSConfigAppliedFlowTimeout OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (2..3600)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Current flow timeout (seconds). Flows are removed from
|
||
|
|
hardware/software if no traffic is seen for this many seconds."
|
||
|
|
::= { alaQoSConfig 6 }
|
||
|
|
|
||
|
|
alaQoSConfigFragmentTimeout OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (2..60)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Pending fragment timeout (seconds). Packet fragments are
|
||
|
|
remembered for this many seconds.
|
||
|
|
Does not take effect until an 'Apply' command is issued"
|
||
|
|
::= { alaQoSConfig 7 }
|
||
|
|
|
||
|
|
alaQoSConfigAppliedFragmentTimeout OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (2..60)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Current fragment timeout (seconds). Packet fragments are
|
||
|
|
remembered for this many seconds."
|
||
|
|
::= { alaQoSConfig 8 }
|
||
|
|
|
||
|
|
alaQoSConfigReflexiveTimeout OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (10..3000)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Pending reflexive timeout (seconds). Anticipate reverse flows
|
||
|
|
for reflexive and NAT connections for this long until we see a
|
||
|
|
response.
|
||
|
|
Does not take effect until an 'Apply' command is issued"
|
||
|
|
::= { alaQoSConfig 9 }
|
||
|
|
|
||
|
|
alaQoSConfigAppliedReflfexiveTimeout OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (10..3000)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Current reflexive timeout (seconds). Anticipate reverse flows
|
||
|
|
for reflexive and NAT connections for this long until we see a
|
||
|
|
response.
|
||
|
|
"
|
||
|
|
::= { alaQoSConfig 10 }
|
||
|
|
|
||
|
|
alaQoSConfigNatTimeout OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (10..200000)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Pending nat timeout (seconds). Once traffic is seen in both
|
||
|
|
directions for anticipated flows, length of time to remember the
|
||
|
|
flow without seeing traffic in either direction.
|
||
|
|
Does not take effect until an 'Apply' command is issued"
|
||
|
|
::= { alaQoSConfig 11 }
|
||
|
|
|
||
|
|
alaQoSConfigAppliedNatTimeout OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (10..200000)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Current nat timeout (seconds). Once traffic is seen in both
|
||
|
|
directions for anticipated flows, length of time to remember the
|
||
|
|
flow without seeing traffic in either direction."
|
||
|
|
::= { alaQoSConfig 12 }
|
||
|
|
|
||
|
|
alaQoSConfigClassifyl3Bridged OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
yes (1),
|
||
|
|
no (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Pending indicator for looking at L3/L4 parameters of bridged
|
||
|
|
traffic. Does not take effect until an 'Apply' command is
|
||
|
|
issued."
|
||
|
|
::= { alaQoSConfig 13 }
|
||
|
|
|
||
|
|
alaQoSConfigAppliedClassifyl3Bridged OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
yes (1),
|
||
|
|
no (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Current indicator for looking at L3/L4 parameters of bridged
|
||
|
|
traffic."
|
||
|
|
::= { alaQoSConfig 14 }
|
||
|
|
|
||
|
|
alaQoSConfigClassifyFragments OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
yes (1),
|
||
|
|
no (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Pending indicator for classifying fragmented traffic at L4
|
||
|
|
Does not take effect until an 'Apply' command is issued"
|
||
|
|
::= { alaQoSConfig 15 }
|
||
|
|
|
||
|
|
alaQoSConfigAppliedClassifyFragments OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
yes (1),
|
||
|
|
no (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Current indicator for classifying fragmented traffic at L4
|
||
|
|
Does not take effect until an 'Apply' command is issued"
|
||
|
|
::= { alaQoSConfig 16 }
|
||
|
|
|
||
|
|
alaQoSConfigDefaultBridgedDisposition OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
accept (1),
|
||
|
|
drop (2),
|
||
|
|
deny (3)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Pending disposition of bridged traffic that doesn't match a
|
||
|
|
policy. Does not take effect until an 'Apply' command is issued."
|
||
|
|
::= { alaQoSConfig 17 }
|
||
|
|
|
||
|
|
alaQoSConfigAppliedDefaultBridgedDisposition OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
accept (1),
|
||
|
|
drop (2),
|
||
|
|
deny (3)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Current disposition of bridged traffic that doesn't match a
|
||
|
|
policy."
|
||
|
|
::= { alaQoSConfig 18 }
|
||
|
|
|
||
|
|
alaQoSConfigDefaultRoutedDisposition OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
accept (1),
|
||
|
|
drop (2),
|
||
|
|
deny (3)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Pending disposition of routed traffic that doesn't match a
|
||
|
|
policy. Does not take effect until an 'Apply' command is issued."
|
||
|
|
::= { alaQoSConfig 19 }
|
||
|
|
|
||
|
|
alaQoSConfigAppliedDefaultRoutedDisposition OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
accept (1),
|
||
|
|
drop (2),
|
||
|
|
deny (3)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Current disposition of routed traffic that doesn't match a policy
|
||
|
|
"
|
||
|
|
::= { alaQoSConfig 20 }
|
||
|
|
|
||
|
|
alaQoSConfigDefaultMulticastDisposition OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
accept (1),
|
||
|
|
drop (2),
|
||
|
|
deny (3)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Pending disposition of IGMP requests that don't match a policy
|
||
|
|
Does not take effect until an 'Apply' command is issued"
|
||
|
|
::= { alaQoSConfig 21 }
|
||
|
|
|
||
|
|
alaQoSConfigAppliedDefaultMulticastDisposition OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
accept (1),
|
||
|
|
drop (2),
|
||
|
|
deny (3)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Current disposition of IGMP requests that don't match a policy
|
||
|
|
"
|
||
|
|
::= { alaQoSConfig 22 }
|
||
|
|
|
||
|
|
alaQoSConfigStatsInterval OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (10..3600)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Interval in seconds for how often statistics are updated"
|
||
|
|
::= { alaQoSConfig 23 }
|
||
|
|
|
||
|
|
alaQoSConfigLogLines OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..1024)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Number of log lines to maintain in the QoS log"
|
||
|
|
::= { alaQoSConfig 24 }
|
||
|
|
|
||
|
|
alaQoSConfigLogLevel OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (2..9)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The level of logging desired. The higher the level, the more
|
||
|
|
verbose the logging"
|
||
|
|
::= { alaQoSConfig 25 }
|
||
|
|
|
||
|
|
alaQoSConfigLogConsole OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
yes (1),
|
||
|
|
no (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Whether QoS log events are logged to the console"
|
||
|
|
::= { alaQoSConfig 26 }
|
||
|
|
|
||
|
|
alaQoSConfigForwardLog OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
yes (1),
|
||
|
|
no (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Whether QoS forwards logging events to PolicyManager"
|
||
|
|
::= { alaQoSConfig 27 }
|
||
|
|
|
||
|
|
alaQoSConfigClearLog OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
yes (1),
|
||
|
|
no (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Clear the QoS log"
|
||
|
|
::= { alaQoSConfig 28 }
|
||
|
|
|
||
|
|
alaQoSConfigApply OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
yes (1),
|
||
|
|
no (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Set to apply all pending QoS configuration/policy changes"
|
||
|
|
::= { alaQoSConfig 29 }
|
||
|
|
|
||
|
|
alaQoSConfigRevert OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
yes (1),
|
||
|
|
no (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Set to revert all pending QoS configuration/policy changes"
|
||
|
|
::= { alaQoSConfig 30 }
|
||
|
|
|
||
|
|
alaQoSConfigReset OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
yes (1),
|
||
|
|
no (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Set to reset global QoS configuration parameters to their
|
||
|
|
default values"
|
||
|
|
::= { alaQoSConfig 31 }
|
||
|
|
|
||
|
|
alaQoSConfigStatsReset OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
yes (1),
|
||
|
|
no (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Set to reset global QoS statistics counters"
|
||
|
|
::= { alaQoSConfig 32 }
|
||
|
|
|
||
|
|
alaQoSConfigFlush OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
yes (1),
|
||
|
|
no (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Flush all pending policy objects"
|
||
|
|
::= { alaQoSConfig 33 }
|
||
|
|
|
||
|
|
alaQoSConfigDebug OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Possible debug flags for QoS"
|
||
|
|
::= { alaQoSConfig 34 }
|
||
|
|
|
||
|
|
alaQoSConfigServicingMode OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
strictpriority (1),
|
||
|
|
prioritywrr (2),
|
||
|
|
wrr (3),
|
||
|
|
drr (4)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Servicing mode for the system"
|
||
|
|
::= { alaQoSConfig 35 }
|
||
|
|
|
||
|
|
alaQoSConfigLowPriorityWeight OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..15)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Weight to use for low priority queue(0) on fixed queue blades"
|
||
|
|
::= { alaQoSConfig 36 }
|
||
|
|
|
||
|
|
alaQoSConfigMediumPriorityWeight OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..15)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Weight to use for medium priority queue(1) on fixed queue blades"
|
||
|
|
::= { alaQoSConfig 37 }
|
||
|
|
|
||
|
|
alaQoSConfigHighPriorityWeight OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..15)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Weight to use for high priority queue(2) on fixed queue blades"
|
||
|
|
::= { alaQoSConfig 38 }
|
||
|
|
|
||
|
|
alaQoSConfigUrgentPriorityWeight OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..15)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Weight to use for urgent priority queue(3) on fixed queue blades"
|
||
|
|
::= { alaQoSConfig 39 }
|
||
|
|
|
||
|
|
alaQoSConfigQ4PriorityWeight OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..15)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Weight to use for COS 4 priority queue(4) on fixed queue blades"
|
||
|
|
::= { alaQoSConfig 40 }
|
||
|
|
|
||
|
|
alaQoSConfigQ5PriorityWeight OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..15)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Weight to use for COS 5 priority queue(5) on fixed queue blades"
|
||
|
|
::= { alaQoSConfig 41 }
|
||
|
|
|
||
|
|
alaQoSConfigQ6PriorityWeight OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..15)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Weight to use for COS 6 priority queue(6) on fixed queue blades"
|
||
|
|
::= { alaQoSConfig 42 }
|
||
|
|
|
||
|
|
alaQoSConfigQ7PriorityWeight OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..15)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Weight to use for COS 7 priority queue(7) on fixed queue blades"
|
||
|
|
::= { alaQoSConfig 43 }
|
||
|
|
|
||
|
|
alaQoSConfigUserportFilter OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Events/protocols to filter on a Userport. Event bits values are:
|
||
|
|
spoof = 1
|
||
|
|
bpdu = 2
|
||
|
|
bgp = 4
|
||
|
|
ospf = 8
|
||
|
|
rip = 16
|
||
|
|
vrrp = 32
|
||
|
|
dhcp-server = 64
|
||
|
|
pim = 128
|
||
|
|
dvmrp = 256
|
||
|
|
is-is = 512
|
||
|
|
dnsreply = 1024"
|
||
|
|
::= { alaQoSConfig 44 }
|
||
|
|
|
||
|
|
alaQoSConfigAppliedUserportFilter OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Events/protocols to filter on a Userport. Event bits values are:
|
||
|
|
spoof = 1
|
||
|
|
bpdu = 2
|
||
|
|
bgp = 4
|
||
|
|
ospf = 8
|
||
|
|
rip = 16
|
||
|
|
vrrp = 32
|
||
|
|
dhcp-server = 64
|
||
|
|
pim = 128
|
||
|
|
dvmrp = 256
|
||
|
|
is-is = 512
|
||
|
|
dnsreply = 1024"
|
||
|
|
::= { alaQoSConfig 45 }
|
||
|
|
|
||
|
|
alaQoSConfigUserportShutdown OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Events/protocols that trigger admin down of a Userport.
|
||
|
|
Event bits values are:
|
||
|
|
spoof = 1
|
||
|
|
bpdu = 2
|
||
|
|
bgp = 4
|
||
|
|
ospf = 8
|
||
|
|
rip = 16
|
||
|
|
vrrp = 32
|
||
|
|
dhcp-server = 64
|
||
|
|
pim = 128
|
||
|
|
dvmrp = 256
|
||
|
|
is-is = 512
|
||
|
|
dnsreply = 1024"
|
||
|
|
::= { alaQoSConfig 46 }
|
||
|
|
|
||
|
|
alaQoSConfigAppliedUserportShutdown OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Events/protocols that trigger admin down of a Userport.
|
||
|
|
Event bits values are:
|
||
|
|
spoof = 1
|
||
|
|
bpdu = 2
|
||
|
|
bgp = 4
|
||
|
|
ospf = 8
|
||
|
|
rip = 16
|
||
|
|
vrrp = 32
|
||
|
|
dhcp-server = 64
|
||
|
|
pim = 128
|
||
|
|
dvmrp = 256
|
||
|
|
is-is = 512
|
||
|
|
dnsreply = 1024"
|
||
|
|
::= { alaQoSConfig 47 }
|
||
|
|
|
||
|
|
alaQoSConfigAutoNMS OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
yes (1),
|
||
|
|
no (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Flag to indicate whether to Prioritize NMS traffic by default."
|
||
|
|
::= { alaQoSConfig 48 }
|
||
|
|
|
||
|
|
alaQoSConfigAutoPhones OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
pri0 (0),
|
||
|
|
pri1 (1),
|
||
|
|
pri2 (2),
|
||
|
|
pri3 (3),
|
||
|
|
pri4 (4),
|
||
|
|
pri5 (5),
|
||
|
|
pri6 (6),
|
||
|
|
pri7 (7),
|
||
|
|
trusted (8),
|
||
|
|
disable (9)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Auto configure CSBU Phones
|
||
|
|
pri0-7 - will replace the priority.
|
||
|
|
trusted - will allow priority from the orginator to be used.
|
||
|
|
disable - will unconfigure to feature."
|
||
|
|
::= { alaQoSConfig 49 }
|
||
|
|
|
||
|
|
alaQoSConfigQMPage OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
yes (1),
|
||
|
|
no (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Flag to indicate whether to send back a quarantined page when a client is quarantined but a remediation URL is not specified."
|
||
|
|
::= { alaQoSConfig 50 }
|
||
|
|
|
||
|
|
alaQoSConfigQMMACGroup OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..31))
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Group name for quarantine manager quarantined MACs."
|
||
|
|
::= { alaQoSConfig 51 }
|
||
|
|
|
||
|
|
alaQoSConfigQMPath OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..255))
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Default path for remediation server redirect."
|
||
|
|
::= { alaQoSConfig 52 }
|
||
|
|
|
||
|
|
alaQoSConfigDEIMapping OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "This object specifies, in ingress traffic, the DEI/CFI bit is mapped
|
||
|
|
or not to internal drop precedence or yellow color.
|
||
|
|
|
||
|
|
enabled(1) -- the DEI/CFI bit is mapped to internal drop precedence or yellow
|
||
|
|
color if that bit is set.
|
||
|
|
disabled(2) -- the DEI/CFI bit is not mapped to drop precedence or yellow
|
||
|
|
color."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSConfig 53 }
|
||
|
|
|
||
|
|
alaQoSConfigDEIMarking OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "This object specifies, in egress traffic, the DEI/CFI bit is mapped
|
||
|
|
or not to internal drop precedence or yellow color.
|
||
|
|
|
||
|
|
enabled(1) -- the DEI/CFI bit is mapped to internal drop precedence or yellow
|
||
|
|
color if that bit is set.
|
||
|
|
disabled(2) -- the DEI/CFI bit is not mapped to drop precedence or yellow
|
||
|
|
color."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSConfig 54 }
|
||
|
|
|
||
|
|
alaQoSConfigStatsResetEgress OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
yes (1),
|
||
|
|
no (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Set to reset global Egress QoS statistics counters"
|
||
|
|
::= { alaQoSConfig 55 }
|
||
|
|
|
||
|
|
--
|
||
|
|
-- Definition of queue table
|
||
|
|
--
|
||
|
|
|
||
|
|
alaQoSQueueTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF QoSQueueEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Table of QoS Queue definitions"
|
||
|
|
::= { alaQoSMIBObjects 32 }
|
||
|
|
|
||
|
|
alaQoSQueueEntry OBJECT-TYPE
|
||
|
|
SYNTAX QoSQueueEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Definition of QoS Queue"
|
||
|
|
INDEX {
|
||
|
|
alaQoSQueueId
|
||
|
|
}
|
||
|
|
::= { alaQoSQueueTable 1 }
|
||
|
|
|
||
|
|
QoSQueueEntry ::=
|
||
|
|
SEQUENCE
|
||
|
|
{
|
||
|
|
alaQoSQueueId Integer32,
|
||
|
|
alaQoSQueueSlot Integer32,
|
||
|
|
alaQoSQueuePort Integer32,
|
||
|
|
alaQoSQueuePortId Integer32,
|
||
|
|
alaQoSQueueType INTEGER,
|
||
|
|
alaQoSQueuePriority Integer32,
|
||
|
|
alaQoSQueueMinimumBandwidth Integer32,
|
||
|
|
alaQoSQueueMaximumBandwidth Integer32,
|
||
|
|
alaQoSQueueAverageBandwidth Integer32,
|
||
|
|
alaQoSQueueMinimumDepth Integer32,
|
||
|
|
alaQoSQueueMaximumDepth Integer32,
|
||
|
|
alaQoSQueueMaximumBuffers Integer32,
|
||
|
|
alaQoSQueue8021p Integer32,
|
||
|
|
alaQoSQueuePacketsSent Integer32,
|
||
|
|
alaQoSQueuePacketsDropped Integer32,
|
||
|
|
alaQoSQueueMaxLength Integer32,
|
||
|
|
alaQoSQueueAverageLength Integer32,
|
||
|
|
alaQoSQueueCurrentLength Integer32,
|
||
|
|
alaQoSQueueAction DisplayString
|
||
|
|
}
|
||
|
|
|
||
|
|
alaQoSQueueId OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Internal queue identifier"
|
||
|
|
::= { alaQoSQueueEntry 1 }
|
||
|
|
|
||
|
|
alaQoSQueueSlot OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..255)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Physical slot queue is destined to"
|
||
|
|
::= { alaQoSQueueEntry 2 }
|
||
|
|
|
||
|
|
alaQoSQueuePort OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..255)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Physical port queue is destined to"
|
||
|
|
::= { alaQoSQueueEntry 3 }
|
||
|
|
|
||
|
|
alaQoSQueuePortId OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..65535)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Internal global port id of destination port"
|
||
|
|
::= { alaQoSQueueEntry 4 }
|
||
|
|
|
||
|
|
alaQoSQueueType OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
mammoth (1),
|
||
|
|
priority (2),
|
||
|
|
spwrr (3),
|
||
|
|
wrr (4),
|
||
|
|
drr (5)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Type of queueing done on this queue"
|
||
|
|
::= { alaQoSQueueEntry 5 }
|
||
|
|
|
||
|
|
alaQoSQueuePriority OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..255)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Queueing priority for the queue"
|
||
|
|
::= { alaQoSQueueEntry 6 }
|
||
|
|
|
||
|
|
alaQoSQueueMinimumBandwidth OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Minimum bandwidth (Kbits/sec) given to the queue"
|
||
|
|
::= { alaQoSQueueEntry 7 }
|
||
|
|
|
||
|
|
alaQoSQueueMaximumBandwidth OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Maximum bandwidth (Kbits/sec) given to the queue"
|
||
|
|
::= { alaQoSQueueEntry 8 }
|
||
|
|
|
||
|
|
alaQoSQueueAverageBandwidth OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Average measured bandwidth (Kbits/sec) for the queue"
|
||
|
|
::= { alaQoSQueueEntry 9 }
|
||
|
|
|
||
|
|
alaQoSQueueMinimumDepth OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Minimum depth (Kbytes) of the queue"
|
||
|
|
::= { alaQoSQueueEntry 10 }
|
||
|
|
|
||
|
|
alaQoSQueueMaximumDepth OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Maximum depth (Kbytes) of the queue"
|
||
|
|
::= { alaQoSQueueEntry 11 }
|
||
|
|
|
||
|
|
alaQoSQueueMaximumBuffers OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..65535)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Maximum number of buffers for the queue"
|
||
|
|
::= { alaQoSQueueEntry 12 }
|
||
|
|
|
||
|
|
alaQoSQueue8021p OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..255)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "802.1p value queue places on traffic"
|
||
|
|
::= { alaQoSQueueEntry 13 }
|
||
|
|
|
||
|
|
alaQoSQueuePacketsSent OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Number of packets sent through the queue"
|
||
|
|
::= { alaQoSQueueEntry 14 }
|
||
|
|
|
||
|
|
alaQoSQueuePacketsDropped OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Number of packets dropped trying to queue into this queue"
|
||
|
|
::= { alaQoSQueueEntry 15 }
|
||
|
|
|
||
|
|
alaQoSQueueMaxLength OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Maximum measured length the queue has reached in buffers"
|
||
|
|
::= { alaQoSQueueEntry 16 }
|
||
|
|
|
||
|
|
alaQoSQueueAverageLength OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Average measured length of the queue in buffers"
|
||
|
|
::= { alaQoSQueueEntry 17 }
|
||
|
|
|
||
|
|
alaQoSQueueCurrentLength OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Current measured length of the queue in buffers"
|
||
|
|
::= { alaQoSQueueEntry 18 }
|
||
|
|
|
||
|
|
alaQoSQueueAction OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..31))
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Name of the action this queue was created from"
|
||
|
|
::= { alaQoSQueueEntry 19 }
|
||
|
|
|
||
|
|
|
||
|
|
--
|
||
|
|
-- Definition of statistics table
|
||
|
|
--
|
||
|
|
|
||
|
|
alaQoSStats OBJECT IDENTIFIER ::= { alaQoSMIBObjects 31 }
|
||
|
|
|
||
|
|
alaQoSStatsL2Events OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Number of L2 classification events"
|
||
|
|
::= { alaQoSStats 1 }
|
||
|
|
|
||
|
|
alaQoSStatsL2Matches OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Number of L2 classifications matching a policy"
|
||
|
|
::= { alaQoSStats 2 }
|
||
|
|
|
||
|
|
alaQoSStatsL2Drops OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Number of L2 classifications matching a drop policy"
|
||
|
|
::= { alaQoSStats 3 }
|
||
|
|
|
||
|
|
alaQoSStatsL3IngressEvents OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Number of L3/L4 ingress classification events"
|
||
|
|
::= { alaQoSStats 4 }
|
||
|
|
|
||
|
|
alaQoSStatsL3IngressMatches OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Number of L3 ingress classifications matching a policy"
|
||
|
|
::= { alaQoSStats 5 }
|
||
|
|
|
||
|
|
alaQoSStatsL3IngressDrops OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Number of L3 ingress classifications matching a drop policy"
|
||
|
|
::= { alaQoSStats 6 }
|
||
|
|
|
||
|
|
alaQoSStatsL3EgressEvents OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Number of L3/L4 egress classification events"
|
||
|
|
::= { alaQoSStats 7 }
|
||
|
|
|
||
|
|
alaQoSStatsL3EgressMatches OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Number of L3 egress classifications matching a policy"
|
||
|
|
::= { alaQoSStats 8 }
|
||
|
|
|
||
|
|
alaQoSStatsL3EgressDrops OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Number of L3 egress classifications matching a drop policy"
|
||
|
|
::= { alaQoSStats 9 }
|
||
|
|
|
||
|
|
alaQoSStatsMulticastEvents OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Number of IGMP classification events"
|
||
|
|
::= { alaQoSStats 10 }
|
||
|
|
|
||
|
|
alaQoSStatsMulticastMatches OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Number of IGMP classifications matching a policy"
|
||
|
|
::= { alaQoSStats 11 }
|
||
|
|
|
||
|
|
alaQoSStatsMulticastDrops OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Number of IGMP classifications matching a drop policy"
|
||
|
|
::= { alaQoSStats 12 }
|
||
|
|
|
||
|
|
alaQoSStatsFragments OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Number of fragments processed by QoS"
|
||
|
|
::= { alaQoSStats 13 }
|
||
|
|
|
||
|
|
alaQoSStatsBadFragments OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Number of illegal (offset = 1) fragments"
|
||
|
|
::= { alaQoSStats 14 }
|
||
|
|
|
||
|
|
alaQoSStatsUnknownFragments OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Number of out of order fragment pieces"
|
||
|
|
::= { alaQoSStats 15 }
|
||
|
|
|
||
|
|
alaQoSStatsReflexiveFlows OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Number of reflexive flow entries"
|
||
|
|
::= { alaQoSStats 16 }
|
||
|
|
|
||
|
|
alaQoSStatsReflexiveCorrections OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Number of reflexive flow corrections"
|
||
|
|
::= { alaQoSStats 17 }
|
||
|
|
|
||
|
|
alaQoSStatsLoadBalanceFlows OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Number of server load balanced flow entries"
|
||
|
|
::= { alaQoSStats 18 }
|
||
|
|
|
||
|
|
alaQoSStatsClassifierMaxNodes OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Highest number of nodes in classifier tree"
|
||
|
|
::= { alaQoSStats 19 }
|
||
|
|
|
||
|
|
alaQoSStatsClassifierMaxDepth OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Length of longest path in classifier tree"
|
||
|
|
::= { alaQoSStats 20 }
|
||
|
|
|
||
|
|
alaQoSStatsFlowLookups OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Number of flow table lookups"
|
||
|
|
::= { alaQoSStats 21 }
|
||
|
|
|
||
|
|
alaQoSStatsFlowHits OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Number of flow table lookup hits"
|
||
|
|
::= { alaQoSStats 22 }
|
||
|
|
|
||
|
|
alaQoSStatsSentNIMessages OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Number of messages sent to NIs"
|
||
|
|
::= { alaQoSStats 23 }
|
||
|
|
|
||
|
|
alaQoSStatsReceivedNIMessages OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Number of messages received from NIs"
|
||
|
|
::= { alaQoSStats 24 }
|
||
|
|
|
||
|
|
alaQoSStatsFailedNIMessages OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Number of failed message attemptes to NIs"
|
||
|
|
::= { alaQoSStats 25 }
|
||
|
|
|
||
|
|
alaQoSStatsSpoofedEvents OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Total Number of spoofed events"
|
||
|
|
::= { alaQoSStats 26 }
|
||
|
|
|
||
|
|
alaQoSStatsNonSpoofedEvents OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Total number of non-spoofed events"
|
||
|
|
::= { alaQoSStats 27 }
|
||
|
|
|
||
|
|
alaQoSStatsDropServicesEvents OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Total number of packets matching the DropServices group"
|
||
|
|
::= { alaQoSStats 28 }
|
||
|
|
|
||
|
|
--
|
||
|
|
-- Definition of slice table
|
||
|
|
--
|
||
|
|
|
||
|
|
alaQoSSlotTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF QoSSlotEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Table of QoS Slot definitions"
|
||
|
|
::= { alaQoSMIBObjects 33 }
|
||
|
|
|
||
|
|
alaQoSSlotEntry OBJECT-TYPE
|
||
|
|
SYNTAX QoSSlotEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Definition of QoS Slot"
|
||
|
|
INDEX {
|
||
|
|
alaQoSSlotSlot,
|
||
|
|
alaQoSSlotSlice
|
||
|
|
}
|
||
|
|
::= { alaQoSSlotTable 1 }
|
||
|
|
|
||
|
|
QoSSlotEntry ::=
|
||
|
|
SEQUENCE
|
||
|
|
{
|
||
|
|
alaQoSSlotSlot Integer32,
|
||
|
|
alaQoSSlotSlice Integer32,
|
||
|
|
alaQoSSlotType INTEGER,
|
||
|
|
alaQoSSlotMaxBuffers Integer32,
|
||
|
|
alaQoSSlotFreeBuffers1 Integer32,
|
||
|
|
alaQoSSlotFreeBuffers2 Integer32,
|
||
|
|
alaQoSSlotThreshold1Low Integer32,
|
||
|
|
alaQoSSlotThreshold1Medium Integer32,
|
||
|
|
alaQoSSlotThreshold1High Integer32,
|
||
|
|
alaQoSSlotThreshold1Urgent Integer32,
|
||
|
|
alaQoSSlotThreshold2Low Integer32,
|
||
|
|
alaQoSSlotThreshold2Medium Integer32,
|
||
|
|
alaQoSSlotThreshold2High Integer32,
|
||
|
|
alaQoSSlotThreshold2Urgent Integer32,
|
||
|
|
alaQoSSlotBuffersDenied Integer32,
|
||
|
|
alaQoSSlotBuffersDeniedAverage Integer32,
|
||
|
|
alaQoSSlotBuffersDropped Integer32,
|
||
|
|
alaQoSSlotBuffersDroppedAverage Integer32,
|
||
|
|
alaQoSSlotWredThresholdP0Lower Integer32,
|
||
|
|
alaQoSSlotWredThresholdP0Upper Integer32,
|
||
|
|
alaQoSSlotWredThresholdP1Lower Integer32,
|
||
|
|
alaQoSSlotWredThresholdP1Upper Integer32,
|
||
|
|
alaQoSSlotWredThresholdP2Lower Integer32,
|
||
|
|
alaQoSSlotWredThresholdP2Upper Integer32,
|
||
|
|
alaQoSSlotWredThresholdP3Lower Integer32,
|
||
|
|
alaQoSSlotWredThresholdP3Upper Integer32,
|
||
|
|
alaQoSSlotWredAverageCounterWeight Integer32,
|
||
|
|
alaQoSSlotWredThresholdStatus INTEGER,
|
||
|
|
alaQoSSlotCbqThresholdMode INTEGER,
|
||
|
|
alaQoSSlotCbqThresholdP1 Integer32,
|
||
|
|
alaQoSSlotCbqThresholdP2 Integer32,
|
||
|
|
alaQoSSlotCbqThresholdP3 Integer32,
|
||
|
|
alaQoSSlotHighDensity INTEGER
|
||
|
|
}
|
||
|
|
|
||
|
|
alaQoSSlotSlot OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..16)
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Physical slot number"
|
||
|
|
::= { alaQoSSlotEntry 1 }
|
||
|
|
|
||
|
|
alaQoSSlotSlice OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..4)
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Physical device number on slot"
|
||
|
|
::= { alaQoSSlotEntry 2 }
|
||
|
|
|
||
|
|
alaQoSSlotType OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
mammoth (1),
|
||
|
|
kodiak (2),
|
||
|
|
mailbox (3),
|
||
|
|
coronado (4),
|
||
|
|
ixe2424 (5),
|
||
|
|
kite (6),
|
||
|
|
fuji (7)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Type of hardware in this slot/slice"
|
||
|
|
::= { alaQoSSlotEntry 3 }
|
||
|
|
|
||
|
|
alaQoSSlotMaxBuffers OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Maximum total buffers on this slot/slice"
|
||
|
|
::= { alaQoSSlotEntry 4 }
|
||
|
|
|
||
|
|
alaQoSSlotFreeBuffers1 OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Current free buffers in list 1"
|
||
|
|
::= { alaQoSSlotEntry 5 }
|
||
|
|
|
||
|
|
alaQoSSlotFreeBuffers2 OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Current free buffers in list 2"
|
||
|
|
::= { alaQoSSlotEntry 6 }
|
||
|
|
|
||
|
|
alaQoSSlotThreshold1Low OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Buffer are not given to low priority traffic from list 1
|
||
|
|
when free buffers in list 1 is less than this threshold."
|
||
|
|
::= { alaQoSSlotEntry 7 }
|
||
|
|
|
||
|
|
alaQoSSlotThreshold1Medium OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Buffer are not given to medium priority traffic from list 1
|
||
|
|
when free buffers in list 1 is less than this threshold."
|
||
|
|
::= { alaQoSSlotEntry 8 }
|
||
|
|
|
||
|
|
alaQoSSlotThreshold1High OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Buffer are not given to high priority traffic from list 1
|
||
|
|
when free buffers in list 1 is less than this threshold."
|
||
|
|
::= { alaQoSSlotEntry 9 }
|
||
|
|
|
||
|
|
alaQoSSlotThreshold1Urgent OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Buffer are not given to urgent priority traffic from list 1
|
||
|
|
when free buffers in list 1 is less than this threshold."
|
||
|
|
::= { alaQoSSlotEntry 10 }
|
||
|
|
|
||
|
|
alaQoSSlotThreshold2Low OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Buffer are not given to low priority traffic from list 2
|
||
|
|
when free buffers in list 2 is less than this threshold."
|
||
|
|
::= { alaQoSSlotEntry 11 }
|
||
|
|
|
||
|
|
alaQoSSlotThreshold2Medium OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Buffer are not given to medium priority traffic from list 2
|
||
|
|
when free buffers in list 2 is less than this threshold."
|
||
|
|
::= { alaQoSSlotEntry 12 }
|
||
|
|
|
||
|
|
alaQoSSlotThreshold2High OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Buffer are not given to high priority traffic from list 2
|
||
|
|
when free buffers in list 2 is less than this threshold."
|
||
|
|
::= { alaQoSSlotEntry 13 }
|
||
|
|
|
||
|
|
alaQoSSlotThreshold2Urgent OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Buffer are not given to urgent priority traffic from list 2
|
||
|
|
when free buffers in list 2 is less than this threshold."
|
||
|
|
::= { alaQoSSlotEntry 14 }
|
||
|
|
|
||
|
|
alaQoSSlotBuffersDenied OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Buffers denied on this slot"
|
||
|
|
::= { alaQoSSlotEntry 15 }
|
||
|
|
|
||
|
|
alaQoSSlotBuffersDeniedAverage OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Average number of denied buffers over time"
|
||
|
|
::= { alaQoSSlotEntry 16 }
|
||
|
|
|
||
|
|
alaQoSSlotBuffersDropped OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Buffers dropped on this slot"
|
||
|
|
::= { alaQoSSlotEntry 17 }
|
||
|
|
|
||
|
|
alaQoSSlotBuffersDroppedAverage OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Average number of dropped buffers over time"
|
||
|
|
::= { alaQoSSlotEntry 18 }
|
||
|
|
|
||
|
|
alaQoSSlotWredThresholdP0Lower OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..4095)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Priority 0 WRED lower threshold for high density module"
|
||
|
|
DEFVAL { 4095 }
|
||
|
|
::= { alaQoSSlotEntry 19 }
|
||
|
|
|
||
|
|
alaQoSSlotWredThresholdP0Upper OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..4095)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Priority 0 WRED upper threshold for high density module"
|
||
|
|
DEFVAL { 4095 }
|
||
|
|
::= { alaQoSSlotEntry 20 }
|
||
|
|
|
||
|
|
alaQoSSlotWredThresholdP1Lower OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..4095)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Priority 1 WRED lower threshold for high density module"
|
||
|
|
DEFVAL { 4095 }
|
||
|
|
::= { alaQoSSlotEntry 21 }
|
||
|
|
|
||
|
|
alaQoSSlotWredThresholdP1Upper OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..4095)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Priority 1 WRED upper threshold for high density module"
|
||
|
|
DEFVAL { 4095 }
|
||
|
|
::= { alaQoSSlotEntry 22 }
|
||
|
|
|
||
|
|
alaQoSSlotWredThresholdP2Lower OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..4095)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Priority 2 WRED lower threshold for high density module"
|
||
|
|
DEFVAL { 4095 }
|
||
|
|
::= { alaQoSSlotEntry 23 }
|
||
|
|
|
||
|
|
alaQoSSlotWredThresholdP2Upper OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..4095)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Priority 2 WRED upper threshold for high density module"
|
||
|
|
DEFVAL { 4095 }
|
||
|
|
::= { alaQoSSlotEntry 24 }
|
||
|
|
|
||
|
|
alaQoSSlotWredThresholdP3Lower OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..4095)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Priority 3 WRED lower threshold for high density module"
|
||
|
|
DEFVAL { 4095 }
|
||
|
|
::= { alaQoSSlotEntry 25 }
|
||
|
|
|
||
|
|
alaQoSSlotWredThresholdP3Upper OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..4095)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Priority 3 WRED upper threshold for high density module"
|
||
|
|
DEFVAL { 4095 }
|
||
|
|
::= { alaQoSSlotEntry 26 }
|
||
|
|
|
||
|
|
alaQoSSlotWredAverageCounterWeight OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..7)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The weight used in the WRED algorithm. It is used as a
|
||
|
|
negative power of 2"
|
||
|
|
DEFVAL { 4 }
|
||
|
|
::= { alaQoSSlotEntry 27 }
|
||
|
|
|
||
|
|
alaQoSSlotWredThresholdStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether WRED maximum thresholds
|
||
|
|
are specified(enable) or not(disable)."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSSlotEntry 28 }
|
||
|
|
|
||
|
|
alaQoSSlotCbqThresholdMode OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
prioritywrr (1),
|
||
|
|
wrr (2),
|
||
|
|
strictpriority (3)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Servicing mode for the CBQ thresholds for high density modules"
|
||
|
|
DEFVAL { prioritywrr }
|
||
|
|
::= { alaQoSSlotEntry 29 }
|
||
|
|
|
||
|
|
alaQoSSlotCbqThresholdP1 OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..4095)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Priority 1 CBQ threshold for high density module"
|
||
|
|
::= { alaQoSSlotEntry 30 }
|
||
|
|
|
||
|
|
alaQoSSlotCbqThresholdP2 OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..4095)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Priority 2 CBQ threshold for high density module"
|
||
|
|
::= { alaQoSSlotEntry 31 }
|
||
|
|
|
||
|
|
alaQoSSlotCbqThresholdP3 OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..4095)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Priority 3 CBQ threshold for high density module"
|
||
|
|
::= { alaQoSSlotEntry 32 }
|
||
|
|
|
||
|
|
alaQoSSlotHighDensity OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
yes (1),
|
||
|
|
no (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Indicates whether this is a high-density slice or not."
|
||
|
|
::= { alaQoSSlotEntry 33 }
|
||
|
|
|
||
|
|
|
||
|
|
--
|
||
|
|
-- Definition of classify table
|
||
|
|
--
|
||
|
|
|
||
|
|
alaQoSClassify OBJECT IDENTIFIER ::= { alaQoSMIBObjects 34 }
|
||
|
|
|
||
|
|
alaQoSClassifyClassify OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
l2 (1),
|
||
|
|
l3 (2),
|
||
|
|
multicast (3)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Which classification routine to run on the sample packet"
|
||
|
|
::= { alaQoSClassify 1 }
|
||
|
|
|
||
|
|
alaQoSClassifyApplied OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
yes (1),
|
||
|
|
no (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "What set of policies QoS uses when testing the classifier.
|
||
|
|
When yes(1) the applied policies are used.
|
||
|
|
When no(2) the pending policies are used."
|
||
|
|
::= { alaQoSClassify 2 }
|
||
|
|
|
||
|
|
alaQoSClassifySourceSlot OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..16)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Source physical slot to submit when testing classifier."
|
||
|
|
::= { alaQoSClassify 3 }
|
||
|
|
|
||
|
|
alaQoSClassifySourcePort OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..52)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Source physical port to submit when testing classifier."
|
||
|
|
::= { alaQoSClassify 4 }
|
||
|
|
|
||
|
|
alaQoSClassifySourceInterfaceType OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
any (0),
|
||
|
|
ethernet (1),
|
||
|
|
wan (2),
|
||
|
|
ethernet10 (3),
|
||
|
|
ethernet100 (4),
|
||
|
|
ethernet1G (5),
|
||
|
|
ethernet10G (6),
|
||
|
|
aggregate (7)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Source interface type to submit when testing classifier."
|
||
|
|
::= { alaQoSClassify 5 }
|
||
|
|
|
||
|
|
alaQoSClassifyDestinationSlot OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..16)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Destination physical slot to submit when testing classifier."
|
||
|
|
::= { alaQoSClassify 6 }
|
||
|
|
|
||
|
|
alaQoSClassifyDestinationPort OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..52)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Destination physical port to submit when testing classifier."
|
||
|
|
::= { alaQoSClassify 7 }
|
||
|
|
|
||
|
|
alaQoSClassifyDestinationInterfaceType OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
any (0),
|
||
|
|
ethernet (1),
|
||
|
|
wan (2),
|
||
|
|
ethernet10 (3),
|
||
|
|
ethernet100 (4),
|
||
|
|
ethernet1G (5),
|
||
|
|
ethernet10G (6),
|
||
|
|
aggregate (7)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Destination interface type to submit when testing classifier."
|
||
|
|
::= { alaQoSClassify 8 }
|
||
|
|
|
||
|
|
alaQoSClassifySourceMac OBJECT-TYPE
|
||
|
|
SYNTAX MacAddress
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Source MAC address to submit when testing classifier."
|
||
|
|
::= { alaQoSClassify 9 }
|
||
|
|
|
||
|
|
alaQoSClassifyDestinationMac OBJECT-TYPE
|
||
|
|
SYNTAX MacAddress
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Destination MAC address to submit when testing classifier."
|
||
|
|
::= { alaQoSClassify 10 }
|
||
|
|
|
||
|
|
alaQoSClassifySourceVlan OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..65535)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Source VLAN to submit when testing classifier."
|
||
|
|
::= { alaQoSClassify 11 }
|
||
|
|
|
||
|
|
alaQoSClassifyDestinationVlan OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..65535)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Destination VLAN to submit when testing classifier."
|
||
|
|
::= { alaQoSClassify 12 }
|
||
|
|
|
||
|
|
alaQoSClassify8021p OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..7)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "802.1p value to submit when testing classifier."
|
||
|
|
::= { alaQoSClassify 13 }
|
||
|
|
|
||
|
|
alaQoSClassifySourceIp OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Source IP address to submit when testing classifier."
|
||
|
|
::= { alaQoSClassify 14 }
|
||
|
|
|
||
|
|
alaQoSClassifyDestinationIp OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Destination IP address to submit when testing classifier."
|
||
|
|
::= { alaQoSClassify 15 }
|
||
|
|
|
||
|
|
alaQoSClassifyMulticastIp OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Multicast IP address to submit when testing classifier."
|
||
|
|
::= { alaQoSClassify 16 }
|
||
|
|
|
||
|
|
alaQoSClassifyTos OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..7)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "TOS value to submit when testing classifier."
|
||
|
|
::= { alaQoSClassify 17 }
|
||
|
|
|
||
|
|
alaQoSClassifyDscp OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..63)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "DSCP value to submit when testing classifier."
|
||
|
|
::= { alaQoSClassify 18 }
|
||
|
|
|
||
|
|
alaQoSClassifyIpProtocol OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..255)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "IP protocol value to submit when testing classifier."
|
||
|
|
::= { alaQoSClassify 19 }
|
||
|
|
|
||
|
|
alaQoSClassifySourceIpPort OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..65535)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Source IP port to submit when testing classifier."
|
||
|
|
::= { alaQoSClassify 20 }
|
||
|
|
|
||
|
|
alaQoSClassifyDestinationIpPort OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..65535)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Destination IP port to submit when testing classifier."
|
||
|
|
::= { alaQoSClassify 21 }
|
||
|
|
|
||
|
|
alaQoSClassifyExecute OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
yes (1),
|
||
|
|
no (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Writing to this field tells QoS to run the classifier on the
|
||
|
|
current packet headers. The classifier stores the results in
|
||
|
|
result fields. The next 'set' to the table will clear all fields
|
||
|
|
before actually performing the set."
|
||
|
|
::= { alaQoSClassify 22 }
|
||
|
|
|
||
|
|
alaQoSClassifyL2SourceResultRule OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..31))
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Matching rule for L2 (source)"
|
||
|
|
::= { alaQoSClassify 23 }
|
||
|
|
|
||
|
|
alaQoSClassifyL2SourceResultDisposition OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
accept (1),
|
||
|
|
drop (2),
|
||
|
|
deny (3)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Result disposition for L2 (source)"
|
||
|
|
::= { alaQoSClassify 24 }
|
||
|
|
|
||
|
|
alaQoSClassifyL2DestinationResultRule OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..31))
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Matching rule for L2 (destination)"
|
||
|
|
::= { alaQoSClassify 25 }
|
||
|
|
|
||
|
|
alaQoSClassifyL2DestinationResultDisposition OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
accept (1),
|
||
|
|
drop (2),
|
||
|
|
deny (3)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Result disposition for L2 (destination)"
|
||
|
|
::= { alaQoSClassify 26 }
|
||
|
|
|
||
|
|
alaQoSClassifyL3ResultRule OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..31))
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Matching rule for L3"
|
||
|
|
::= { alaQoSClassify 27 }
|
||
|
|
|
||
|
|
alaQoSClassifyL3ResultDisposition OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
accept (1),
|
||
|
|
drop (2),
|
||
|
|
deny (3)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Result disposition for L3"
|
||
|
|
::= { alaQoSClassify 28 }
|
||
|
|
|
||
|
|
alaQoSClassifyIGMPResultRule OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..31))
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Matching rule for IGMP request"
|
||
|
|
::= { alaQoSClassify 29 }
|
||
|
|
|
||
|
|
alaQoSClassifyIGMPResultDisposition OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
accept (1),
|
||
|
|
drop (2),
|
||
|
|
deny (3)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Result disposition for IGMP"
|
||
|
|
::= { alaQoSClassify 30 }
|
||
|
|
|
||
|
|
alaQoSClassifyMulticastResultRule OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..31))
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Matching rule for multicast"
|
||
|
|
::= { alaQoSClassify 31 }
|
||
|
|
|
||
|
|
alaQoSClassifyMulticastResultDisposition OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
accept (1),
|
||
|
|
drop (2),
|
||
|
|
deny (3)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Result disposition for multicast"
|
||
|
|
::= { alaQoSClassify 32 }
|
||
|
|
|
||
|
|
|
||
|
|
--
|
||
|
|
-- Definition of user cams table
|
||
|
|
--
|
||
|
|
|
||
|
|
alaQoSSlotProtocolTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF QoSSlotProtocolEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Table of QoS SlotProtocol definitions"
|
||
|
|
::= { alaQoSMIBObjects 35 }
|
||
|
|
|
||
|
|
alaQoSSlotProtocolEntry OBJECT-TYPE
|
||
|
|
SYNTAX QoSSlotProtocolEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Definition of QoS SlotProtocol"
|
||
|
|
INDEX {
|
||
|
|
alaQoSSlotSlot,
|
||
|
|
alaQoSSlotSlice,
|
||
|
|
alaQoSSlotProtocolId
|
||
|
|
}
|
||
|
|
::= { alaQoSSlotProtocolTable 1 }
|
||
|
|
|
||
|
|
QoSSlotProtocolEntry ::=
|
||
|
|
SEQUENCE
|
||
|
|
{
|
||
|
|
alaQoSSlotProtocolId INTEGER,
|
||
|
|
alaQoSSlotProtocolEthertype Integer32,
|
||
|
|
alaQoSSlotProtocolDsap Integer32,
|
||
|
|
alaQoSSlotProtocolSsap Integer32,
|
||
|
|
alaQoSSlotProtocol8023Enabled INTEGER,
|
||
|
|
alaQoSSlotProtocolType INTEGER,
|
||
|
|
alaQoSSlotProtocolRowStatus RowStatus
|
||
|
|
}
|
||
|
|
|
||
|
|
alaQoSSlotProtocolId OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
user1 (1),
|
||
|
|
user2 (2),
|
||
|
|
user3 (3),
|
||
|
|
user4 (4),
|
||
|
|
unknown (5)
|
||
|
|
}
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Used on high density module classification in the MAC.
|
||
|
|
This is the protocol ID used between the CAM and
|
||
|
|
priority descriptors."
|
||
|
|
::= { alaQoSSlotProtocolEntry 1 }
|
||
|
|
|
||
|
|
alaQoSSlotProtocolEthertype OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..65535)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Used on high density module classification in the MAC.
|
||
|
|
This is the Ethernet type used between the CAM for
|
||
|
|
classification."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { alaQoSSlotProtocolEntry 2 }
|
||
|
|
|
||
|
|
alaQoSSlotProtocolDsap OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..255)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Used on high density module classification in the MAC.
|
||
|
|
This is the destination SAP in an 802.3 packet."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { alaQoSSlotProtocolEntry 3 }
|
||
|
|
|
||
|
|
alaQoSSlotProtocolSsap OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..255)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Used on high density module classification in the MAC.
|
||
|
|
This is the source SAP in an 802.3 packet."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { alaQoSSlotProtocolEntry 4 }
|
||
|
|
|
||
|
|
alaQoSSlotProtocol8023Enabled OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable (1),
|
||
|
|
disable (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Used on high density module classification in the MAC.
|
||
|
|
This will enable 802.3 checking on the CAM entry."
|
||
|
|
DEFVAL { disable }
|
||
|
|
::= { alaQoSSlotProtocolEntry 5 }
|
||
|
|
|
||
|
|
alaQoSSlotProtocolType OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
priority (1),
|
||
|
|
fallback (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Used on high density module classification in the MAC.
|
||
|
|
This positions the CAM entry in the list. Priority will
|
||
|
|
put the entries in the front of the CAM, giving it priority.
|
||
|
|
fallback will put the entry at the end."
|
||
|
|
DEFVAL { fallback }
|
||
|
|
::= { alaQoSSlotProtocolEntry 6 }
|
||
|
|
|
||
|
|
alaQoSSlotProtocolRowStatus OBJECT-TYPE
|
||
|
|
SYNTAX RowStatus
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Used to create/delete slot protoocols according to the
|
||
|
|
RowStatus convention"
|
||
|
|
::= { alaQoSSlotProtocolEntry 7 }
|
||
|
|
|
||
|
|
|
||
|
|
--
|
||
|
|
-- Definition of user pdis table
|
||
|
|
--
|
||
|
|
|
||
|
|
alaQoSPortProtocolTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF QoSPortProtocolEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Table of QoS PortProtocol definitions"
|
||
|
|
::= { alaQoSMIBObjects 36 }
|
||
|
|
|
||
|
|
alaQoSPortProtocolEntry OBJECT-TYPE
|
||
|
|
SYNTAX QoSPortProtocolEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Definition of QoS PortProtocol"
|
||
|
|
INDEX {
|
||
|
|
alaQoSPortSlot,
|
||
|
|
alaQoSPortPort,
|
||
|
|
alaQoSPortProtocolId
|
||
|
|
}
|
||
|
|
::= { alaQoSPortProtocolTable 1 }
|
||
|
|
|
||
|
|
QoSPortProtocolEntry ::=
|
||
|
|
SEQUENCE
|
||
|
|
{
|
||
|
|
alaQoSPortProtocolId INTEGER,
|
||
|
|
alaQoSPortProtocolClassification INTEGER,
|
||
|
|
alaQoSPortProtocolPriorityP0 Integer32,
|
||
|
|
alaQoSPortProtocolPriorityP1 Integer32,
|
||
|
|
alaQoSPortProtocolPriorityP2 Integer32,
|
||
|
|
alaQoSPortProtocolPriorityP3 Integer32,
|
||
|
|
alaQoSPortProtocolPriorityP4 Integer32,
|
||
|
|
alaQoSPortProtocolPriorityP5 Integer32,
|
||
|
|
alaQoSPortProtocolPriorityP6 Integer32,
|
||
|
|
alaQoSPortProtocolPriorityP7 Integer32,
|
||
|
|
alaQoSPortProtocolRowStatus RowStatus
|
||
|
|
}
|
||
|
|
|
||
|
|
alaQoSPortProtocolId OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
bpdu (1),
|
||
|
|
lcpsnap (2),
|
||
|
|
lcpeth (3),
|
||
|
|
ipv4 (4),
|
||
|
|
arp (5),
|
||
|
|
rarp (6),
|
||
|
|
ipv6 (7),
|
||
|
|
ipx (8),
|
||
|
|
apple (9),
|
||
|
|
sna (10),
|
||
|
|
decnet (11),
|
||
|
|
user1 (12),
|
||
|
|
user2 (13),
|
||
|
|
user3 (14),
|
||
|
|
user4 (15)
|
||
|
|
}
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Used on high density module classification in the MAC. This
|
||
|
|
is the protocol id that needs to be changed."
|
||
|
|
::= { alaQoSPortProtocolEntry 1 }
|
||
|
|
|
||
|
|
alaQoSPortProtocolClassification OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
b8021p (1),
|
||
|
|
tos (2),
|
||
|
|
dscp (3)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Used on high density module classification in the MAC. This
|
||
|
|
determines what type of classification is used to find
|
||
|
|
priority."
|
||
|
|
DEFVAL { b8021p }
|
||
|
|
::= { alaQoSPortProtocolEntry 2 }
|
||
|
|
|
||
|
|
alaQoSPortProtocolPriorityP0 OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..3)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Used on high density module classification in the MAC. This
|
||
|
|
is the new priority for P0 to be mapped to."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { alaQoSPortProtocolEntry 3 }
|
||
|
|
|
||
|
|
alaQoSPortProtocolPriorityP1 OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..3)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Used on high density module classification in the MAC. This
|
||
|
|
is the new priority for P1 to be mapped to."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { alaQoSPortProtocolEntry 4 }
|
||
|
|
|
||
|
|
alaQoSPortProtocolPriorityP2 OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..3)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Used on high density module classification in the MAC. This
|
||
|
|
is the new priority for P2 to be mapped to."
|
||
|
|
DEFVAL { 1 }
|
||
|
|
::= { alaQoSPortProtocolEntry 5 }
|
||
|
|
|
||
|
|
alaQoSPortProtocolPriorityP3 OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..3)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Used on high density module classification in the MAC. This
|
||
|
|
is the new priority for P3 to be mapped to."
|
||
|
|
DEFVAL { 1 }
|
||
|
|
::= { alaQoSPortProtocolEntry 6 }
|
||
|
|
|
||
|
|
alaQoSPortProtocolPriorityP4 OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..3)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Used on high density module classification in the MAC. This
|
||
|
|
is the new priority for P4 to be mapped to."
|
||
|
|
DEFVAL { 2 }
|
||
|
|
::= { alaQoSPortProtocolEntry 7 }
|
||
|
|
|
||
|
|
alaQoSPortProtocolPriorityP5 OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..3)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Used on high density module classification in the MAC. This
|
||
|
|
is the new priority for P5 to be mapped to."
|
||
|
|
DEFVAL { 2 }
|
||
|
|
::= { alaQoSPortProtocolEntry 8 }
|
||
|
|
|
||
|
|
alaQoSPortProtocolPriorityP6 OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..3)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Used on high density module classification in the MAC. This
|
||
|
|
is the new priority for P6 to be mapped to."
|
||
|
|
DEFVAL { 3 }
|
||
|
|
::= { alaQoSPortProtocolEntry 9 }
|
||
|
|
|
||
|
|
alaQoSPortProtocolPriorityP7 OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..3)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Used on high density module classification in the MAC. This
|
||
|
|
is the new priority for P7 to be mapped to."
|
||
|
|
DEFVAL { 3 }
|
||
|
|
::= { alaQoSPortProtocolEntry 10 }
|
||
|
|
|
||
|
|
alaQoSPortProtocolRowStatus OBJECT-TYPE
|
||
|
|
SYNTAX RowStatus
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Used to create/delete rows according to RowStatus convention"
|
||
|
|
::= { alaQoSPortProtocolEntry 11 }
|
||
|
|
|
||
|
|
|
||
|
|
--
|
||
|
|
-- Definition of dscp table
|
||
|
|
--
|
||
|
|
|
||
|
|
alaQoSSlotDscpTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF QoSSlotDscpEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Table of QoS SlotDscp definitions"
|
||
|
|
::= { alaQoSMIBObjects 37 }
|
||
|
|
|
||
|
|
alaQoSSlotDscpEntry OBJECT-TYPE
|
||
|
|
SYNTAX QoSSlotDscpEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Definition of QoS SlotDscp"
|
||
|
|
INDEX {
|
||
|
|
alaQoSSlotSlot,
|
||
|
|
alaQoSSlotSlice,
|
||
|
|
alaQoSSlotDscpIndex
|
||
|
|
}
|
||
|
|
::= { alaQoSSlotDscpTable 1 }
|
||
|
|
|
||
|
|
QoSSlotDscpEntry ::=
|
||
|
|
SEQUENCE
|
||
|
|
{
|
||
|
|
alaQoSSlotDscpIndex Integer32,
|
||
|
|
alaQoSSlotDscpPriority Integer32
|
||
|
|
}
|
||
|
|
|
||
|
|
alaQoSSlotDscpIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..63)
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Used on high density module classification in the MAC
|
||
|
|
This is the index into the DSCP table to access."
|
||
|
|
::= { alaQoSSlotDscpEntry 1 }
|
||
|
|
|
||
|
|
alaQoSSlotDscpPriority OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..3)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Used on high density module classification in the MAC.
|
||
|
|
This is the priority of the index of the DSCP table."
|
||
|
|
::= { alaQoSSlotDscpEntry 2 }
|
||
|
|
|
||
|
|
|
||
|
|
--
|
||
|
|
-- Definition of cams table
|
||
|
|
--
|
||
|
|
|
||
|
|
alaQoSSlotPcamTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF QoSSlotPcamEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Table of QoS SlotPcam definitions"
|
||
|
|
::= { alaQoSMIBObjects 38 }
|
||
|
|
|
||
|
|
alaQoSSlotPcamEntry OBJECT-TYPE
|
||
|
|
SYNTAX QoSSlotPcamEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Definition of QoS SlotPcam"
|
||
|
|
INDEX {
|
||
|
|
alaQoSSlotSlot,
|
||
|
|
alaQoSSlotSlice,
|
||
|
|
alaQoSSlotPcamId
|
||
|
|
}
|
||
|
|
::= { alaQoSSlotPcamTable 1 }
|
||
|
|
|
||
|
|
QoSSlotPcamEntry ::=
|
||
|
|
SEQUENCE
|
||
|
|
{
|
||
|
|
alaQoSSlotPcamId Integer32,
|
||
|
|
alaQoSSlotPcamEthertype Integer32,
|
||
|
|
alaQoSSlotPcamDsap Integer32,
|
||
|
|
alaQoSSlotPcamSsap Integer32,
|
||
|
|
alaQoSSlotPcam8023Enabled INTEGER,
|
||
|
|
alaQoSSlotPcamProtocolNumber Integer32,
|
||
|
|
alaQoSSlotPcamEnableEntry INTEGER,
|
||
|
|
alaQoSSlotPcamEnable8023 INTEGER,
|
||
|
|
alaQoSSlotPcamEnableDsap INTEGER,
|
||
|
|
alaQoSSlotPcamEnableSsap INTEGER,
|
||
|
|
alaQoSSlotPcamEnableEthertype INTEGER
|
||
|
|
}
|
||
|
|
|
||
|
|
alaQoSSlotPcamId OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..24)
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Used on high density module classification in the MAC.
|
||
|
|
This is the index used in the PCAM."
|
||
|
|
::= { alaQoSSlotPcamEntry 1 }
|
||
|
|
|
||
|
|
alaQoSSlotPcamEthertype OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..65535)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Used on high density module classification in the MAC.
|
||
|
|
This is the Ethernet type in the CAM."
|
||
|
|
::= { alaQoSSlotPcamEntry 2 }
|
||
|
|
|
||
|
|
alaQoSSlotPcamDsap OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..255)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Used on high density module classification in the MAC.
|
||
|
|
This is the destination SAP in an 802.3 packet."
|
||
|
|
::= { alaQoSSlotPcamEntry 3 }
|
||
|
|
|
||
|
|
alaQoSSlotPcamSsap OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..255)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Used on high density module classification in the MAC.
|
||
|
|
This is the source SAP in an 802.3 packet."
|
||
|
|
::= { alaQoSSlotPcamEntry 4 }
|
||
|
|
|
||
|
|
alaQoSSlotPcam8023Enabled OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
yes (1),
|
||
|
|
no (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Used on high density module classification in the MAC.
|
||
|
|
This will enable 802.3 checking on the CAM entry."
|
||
|
|
::= { alaQoSSlotPcamEntry 5 }
|
||
|
|
|
||
|
|
alaQoSSlotPcamProtocolNumber OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..255)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Used on high density module classification in the MAC.
|
||
|
|
This identifies the protocol number of the CAM entry."
|
||
|
|
::= { alaQoSSlotPcamEntry 6 }
|
||
|
|
|
||
|
|
alaQoSSlotPcamEnableEntry OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
yes (1),
|
||
|
|
no (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Used on high density module to enable the pcam entry."
|
||
|
|
::= { alaQoSSlotPcamEntry 7 }
|
||
|
|
|
||
|
|
alaQoSSlotPcamEnable8023 OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
yes (1),
|
||
|
|
no (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Used on high density module to indiciate if 802.3
|
||
|
|
is enabled in the pcam entry."
|
||
|
|
::= { alaQoSSlotPcamEntry 8 }
|
||
|
|
|
||
|
|
alaQoSSlotPcamEnableDsap OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
yes (1),
|
||
|
|
no (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Used on high density module to indiciate if DSAP
|
||
|
|
is enabled in the pcam entry."
|
||
|
|
::= { alaQoSSlotPcamEntry 9 }
|
||
|
|
|
||
|
|
alaQoSSlotPcamEnableSsap OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
yes (1),
|
||
|
|
no (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Used on high density module to indiciate if SSAP
|
||
|
|
is enabled in the pcam entry."
|
||
|
|
::= { alaQoSSlotPcamEntry 10 }
|
||
|
|
|
||
|
|
alaQoSSlotPcamEnableEthertype OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
yes (1),
|
||
|
|
no (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Used on high density module to indiciate if Ethertype
|
||
|
|
is enabled in the pcam entry."
|
||
|
|
::= { alaQoSSlotPcamEntry 11 }
|
||
|
|
|
||
|
|
|
||
|
|
--
|
||
|
|
-- Definition of pdi table
|
||
|
|
--
|
||
|
|
|
||
|
|
alaQoSPortPdiTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF QoSPortPdiEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Table of QoS PortPdi definitions"
|
||
|
|
::= { alaQoSMIBObjects 39 }
|
||
|
|
|
||
|
|
alaQoSPortPdiEntry OBJECT-TYPE
|
||
|
|
SYNTAX QoSPortPdiEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Definition of QoS PortPdi"
|
||
|
|
INDEX {
|
||
|
|
alaQoSPortSlot,
|
||
|
|
alaQoSPortPort,
|
||
|
|
alaQoSPortPdiId
|
||
|
|
}
|
||
|
|
::= { alaQoSPortPdiTable 1 }
|
||
|
|
|
||
|
|
QoSPortPdiEntry ::=
|
||
|
|
SEQUENCE
|
||
|
|
{
|
||
|
|
alaQoSPortPdiId Integer32,
|
||
|
|
alaQoSPortPdiPriorityType Integer32,
|
||
|
|
alaQoSPortPdiPriorityP0 Integer32,
|
||
|
|
alaQoSPortPdiPriorityP1 Integer32,
|
||
|
|
alaQoSPortPdiPriorityP2 Integer32,
|
||
|
|
alaQoSPortPdiPriorityP3 Integer32,
|
||
|
|
alaQoSPortPdiPriorityP4 Integer32,
|
||
|
|
alaQoSPortPdiPriorityP5 Integer32,
|
||
|
|
alaQoSPortPdiPriorityP6 Integer32,
|
||
|
|
alaQoSPortPdiPriorityP7 Integer32
|
||
|
|
}
|
||
|
|
|
||
|
|
alaQoSPortPdiId OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..16)
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Used on high density module classification in the MAC.
|
||
|
|
This is the index used in the PDI."
|
||
|
|
::= { alaQoSPortPdiEntry 1 }
|
||
|
|
|
||
|
|
alaQoSPortPdiPriorityType OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..255)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Used on high density module classification in the MAC.
|
||
|
|
This is the classification type on the port."
|
||
|
|
::= { alaQoSPortPdiEntry 2 }
|
||
|
|
|
||
|
|
alaQoSPortPdiPriorityP0 OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..255)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Used on high density module classification in the MAC.
|
||
|
|
This is the internal priority mapping for a P0 packet."
|
||
|
|
::= { alaQoSPortPdiEntry 3 }
|
||
|
|
|
||
|
|
alaQoSPortPdiPriorityP1 OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..255)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Used on high density module classification in the MAC.
|
||
|
|
This is the internal priority mapping for a P1 packet."
|
||
|
|
::= { alaQoSPortPdiEntry 4 }
|
||
|
|
|
||
|
|
alaQoSPortPdiPriorityP2 OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..255)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Used on high density module classification in the MAC.
|
||
|
|
This is the internal priority mapping for a P2 packet."
|
||
|
|
::= { alaQoSPortPdiEntry 5 }
|
||
|
|
|
||
|
|
alaQoSPortPdiPriorityP3 OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..255)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Used on high density module classification in the MAC.
|
||
|
|
This is the internal priority mapping for a P3 packet."
|
||
|
|
::= { alaQoSPortPdiEntry 6 }
|
||
|
|
|
||
|
|
alaQoSPortPdiPriorityP4 OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..255)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Used on high density module classification in the MAC.
|
||
|
|
This is the internal priority mapping for a P4 packet."
|
||
|
|
::= { alaQoSPortPdiEntry 7 }
|
||
|
|
|
||
|
|
alaQoSPortPdiPriorityP5 OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..255)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Used on high density module classification in the MAC.
|
||
|
|
This is the internal priority mapping for a P5 packet."
|
||
|
|
::= { alaQoSPortPdiEntry 8 }
|
||
|
|
|
||
|
|
alaQoSPortPdiPriorityP6 OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..255)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Used on high density module classification in the MAC.
|
||
|
|
This is the internal priority mapping for a P6 packet."
|
||
|
|
::= { alaQoSPortPdiEntry 9 }
|
||
|
|
|
||
|
|
alaQoSPortPdiPriorityP7 OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..255)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Used on high density module classification in the MAC.
|
||
|
|
This is the internal priority mapping for a P7 packet."
|
||
|
|
::= { alaQoSPortPdiEntry 10 }
|
||
|
|
|
||
|
|
|
||
|
|
--
|
||
|
|
-- Definition of validity period table
|
||
|
|
--
|
||
|
|
|
||
|
|
alaQoSValidityPeriodTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF QoSValidityPeriodEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Table of QoS ValidityPeriod definitions"
|
||
|
|
::= { alaQoSMIBObjects 40 }
|
||
|
|
|
||
|
|
alaQoSValidityPeriodEntry OBJECT-TYPE
|
||
|
|
SYNTAX QoSValidityPeriodEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Definition of QoS ValidityPeriod"
|
||
|
|
INDEX {
|
||
|
|
alaQoSValidityPeriodName
|
||
|
|
}
|
||
|
|
::= { alaQoSValidityPeriodTable 1 }
|
||
|
|
|
||
|
|
QoSValidityPeriodEntry ::=
|
||
|
|
SEQUENCE
|
||
|
|
{
|
||
|
|
alaQoSValidityPeriodName DisplayString,
|
||
|
|
alaQoSValidityPeriodSource INTEGER,
|
||
|
|
alaQoSValidityPeriodDays Integer32,
|
||
|
|
alaQoSValidityPeriodDaysStatus INTEGER,
|
||
|
|
alaQoSValidityPeriodMonths Integer32,
|
||
|
|
alaQoSValidityPeriodMonthsStatus INTEGER,
|
||
|
|
alaQoSValidityPeriodHour DisplayString,
|
||
|
|
alaQoSValidityPeriodHourStatus INTEGER,
|
||
|
|
alaQoSValidityPeriodEndHour DisplayString,
|
||
|
|
alaQoSValidityPeriodInterval DisplayString,
|
||
|
|
alaQoSValidityPeriodIntervalStatus INTEGER,
|
||
|
|
alaQoSValidityPeriodEndInterval DisplayString,
|
||
|
|
alaQoSValidityPeriodRowStatus RowStatus
|
||
|
|
}
|
||
|
|
|
||
|
|
alaQoSValidityPeriodName OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..31))
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Name of validity period"
|
||
|
|
::= { alaQoSValidityPeriodEntry 1 }
|
||
|
|
|
||
|
|
alaQoSValidityPeriodSource OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
ldap (1),
|
||
|
|
cli (2),
|
||
|
|
blt (3),
|
||
|
|
api (4),
|
||
|
|
imp (5)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "What entity created the validity period."
|
||
|
|
DEFVAL { cli }
|
||
|
|
::= { alaQoSValidityPeriodEntry 2 }
|
||
|
|
|
||
|
|
alaQoSValidityPeriodDays OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Bitfield for each day of the week this validity period
|
||
|
|
is active. Monday is least significant, Sunday
|
||
|
|
is most significant."
|
||
|
|
::= { alaQoSValidityPeriodEntry 3 }
|
||
|
|
|
||
|
|
alaQoSValidityPeriodDaysStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the validity period
|
||
|
|
has specific active days of the month."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSValidityPeriodEntry 4 }
|
||
|
|
|
||
|
|
alaQoSValidityPeriodMonths OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Bitfield for each month this validity period
|
||
|
|
is active. January is least significant. Decemeber
|
||
|
|
is most significant."
|
||
|
|
::= { alaQoSValidityPeriodEntry 5 }
|
||
|
|
|
||
|
|
alaQoSValidityPeriodMonthsStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the validity period
|
||
|
|
has specific active days of the week."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSValidityPeriodEntry 6 }
|
||
|
|
|
||
|
|
alaQoSValidityPeriodHour OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..7))
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Time of day this period becomes active.
|
||
|
|
Format is 'hh:mm'"
|
||
|
|
::= { alaQoSValidityPeriodEntry 7 }
|
||
|
|
|
||
|
|
alaQoSValidityPeriodHourStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the validity period
|
||
|
|
has specific active hours of the day."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSValidityPeriodEntry 8 }
|
||
|
|
|
||
|
|
alaQoSValidityPeriodEndHour OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..7))
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Time of day this period becomes inactive.
|
||
|
|
Format is 'hh:mm'"
|
||
|
|
::= { alaQoSValidityPeriodEntry 9 }
|
||
|
|
|
||
|
|
alaQoSValidityPeriodInterval OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..19))
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Date/time when the validity period begins.
|
||
|
|
Format is 'mm/dd/yyyy hh:mm'"
|
||
|
|
::= { alaQoSValidityPeriodEntry 10 }
|
||
|
|
|
||
|
|
alaQoSValidityPeriodIntervalStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the validity period
|
||
|
|
has a specific active date-time interval."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { alaQoSValidityPeriodEntry 11 }
|
||
|
|
|
||
|
|
alaQoSValidityPeriodEndInterval OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..19))
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Date/time when the validity period ends.
|
||
|
|
Format is 'mm/dd/yyyy hh:mm'"
|
||
|
|
::= { alaQoSValidityPeriodEntry 12 }
|
||
|
|
|
||
|
|
alaQoSValidityPeriodRowStatus OBJECT-TYPE
|
||
|
|
SYNTAX RowStatus
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Used to create/delete validity periods according
|
||
|
|
to the RowStatus convention"
|
||
|
|
::= { alaQoSValidityPeriodEntry 13 }
|
||
|
|
|
||
|
|
|
||
|
|
--
|
||
|
|
-- Definition of validity period table
|
||
|
|
--
|
||
|
|
|
||
|
|
alaQoSAppliedValidityPeriodTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF QoSAppliedValidityPeriodEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Table of QoS AppliedValidityPeriod definitions"
|
||
|
|
::= { alaQoSMIBObjects 41 }
|
||
|
|
|
||
|
|
alaQoSAppliedValidityPeriodEntry OBJECT-TYPE
|
||
|
|
SYNTAX QoSAppliedValidityPeriodEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Definition of QoS AppliedValidityPeriod"
|
||
|
|
INDEX {
|
||
|
|
alaQoSAppliedValidityPeriodName
|
||
|
|
}
|
||
|
|
::= { alaQoSAppliedValidityPeriodTable 1 }
|
||
|
|
|
||
|
|
QoSAppliedValidityPeriodEntry ::=
|
||
|
|
SEQUENCE
|
||
|
|
{
|
||
|
|
alaQoSAppliedValidityPeriodName DisplayString,
|
||
|
|
alaQoSAppliedValidityPeriodSource INTEGER,
|
||
|
|
alaQoSAppliedValidityPeriodDays Integer32,
|
||
|
|
alaQoSAppliedValidityPeriodDaysStatus INTEGER,
|
||
|
|
alaQoSAppliedValidityPeriodMonths Integer32,
|
||
|
|
alaQoSAppliedValidityPeriodMonthsStatus INTEGER,
|
||
|
|
alaQoSAppliedValidityPeriodHour DisplayString,
|
||
|
|
alaQoSAppliedValidityPeriodHourStatus INTEGER,
|
||
|
|
alaQoSAppliedValidityPeriodEndHour DisplayString,
|
||
|
|
alaQoSAppliedValidityPeriodInterval DisplayString,
|
||
|
|
alaQoSAppliedValidityPeriodIntervalStatus INTEGER,
|
||
|
|
alaQoSAppliedValidityPeriodEndInterval DisplayString,
|
||
|
|
alaQoSAppliedValidityPeriodRowStatus RowStatus
|
||
|
|
}
|
||
|
|
|
||
|
|
alaQoSAppliedValidityPeriodName OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..31))
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Name of validity period"
|
||
|
|
::= { alaQoSAppliedValidityPeriodEntry 1 }
|
||
|
|
|
||
|
|
alaQoSAppliedValidityPeriodSource OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
ldap (1),
|
||
|
|
cli (2),
|
||
|
|
blt (3),
|
||
|
|
api (4),
|
||
|
|
imp (5)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "What entity created the validity period."
|
||
|
|
::= { alaQoSAppliedValidityPeriodEntry 2 }
|
||
|
|
|
||
|
|
alaQoSAppliedValidityPeriodDays OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Bitfield for each day of the week this validity period
|
||
|
|
is active. Monday is least significant, Sunday
|
||
|
|
is most significant."
|
||
|
|
::= { alaQoSAppliedValidityPeriodEntry 3 }
|
||
|
|
|
||
|
|
alaQoSAppliedValidityPeriodDaysStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the validity period
|
||
|
|
has specific active days of the month."
|
||
|
|
::= { alaQoSAppliedValidityPeriodEntry 4 }
|
||
|
|
|
||
|
|
alaQoSAppliedValidityPeriodMonths OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Bitfield for each month this validity period
|
||
|
|
is active. January is least significant. Decemeber
|
||
|
|
is most significant."
|
||
|
|
::= { alaQoSAppliedValidityPeriodEntry 5 }
|
||
|
|
|
||
|
|
alaQoSAppliedValidityPeriodMonthsStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the validity period
|
||
|
|
has specific active days of the week."
|
||
|
|
::= { alaQoSAppliedValidityPeriodEntry 6 }
|
||
|
|
|
||
|
|
alaQoSAppliedValidityPeriodHour OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..7))
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Time of day this period becomes active.
|
||
|
|
Format is 'hh:mm'"
|
||
|
|
::= { alaQoSAppliedValidityPeriodEntry 7 }
|
||
|
|
|
||
|
|
alaQoSAppliedValidityPeriodHourStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the validity period
|
||
|
|
has specific active hours of the day."
|
||
|
|
::= { alaQoSAppliedValidityPeriodEntry 8 }
|
||
|
|
|
||
|
|
alaQoSAppliedValidityPeriodEndHour OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..7))
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Time of day this period becomes inactive.
|
||
|
|
Format is 'hh:mm'"
|
||
|
|
::= { alaQoSAppliedValidityPeriodEntry 9 }
|
||
|
|
|
||
|
|
alaQoSAppliedValidityPeriodInterval OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..19))
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Date/time when the validity period begins.
|
||
|
|
Format is 'mm/dd/yyyy hh:mm'"
|
||
|
|
::= { alaQoSAppliedValidityPeriodEntry 10 }
|
||
|
|
|
||
|
|
alaQoSAppliedValidityPeriodIntervalStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled (1),
|
||
|
|
disabled (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status field indicating whether the validity period
|
||
|
|
has a specific active date-time interval."
|
||
|
|
::= { alaQoSAppliedValidityPeriodEntry 11 }
|
||
|
|
|
||
|
|
alaQoSAppliedValidityPeriodEndInterval OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..19))
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Date/time when the validity period ends.
|
||
|
|
Format is 'mm/dd/yyyy hh:mm'"
|
||
|
|
::= { alaQoSAppliedValidityPeriodEntry 12 }
|
||
|
|
|
||
|
|
alaQoSAppliedValidityPeriodRowStatus OBJECT-TYPE
|
||
|
|
SYNTAX RowStatus
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Used to create/delete validity periods according
|
||
|
|
to the RowStatus convention"
|
||
|
|
::= { alaQoSAppliedValidityPeriodEntry 13 }
|
||
|
|
|
||
|
|
|
||
|
|
--
|
||
|
|
-- Definition of import table
|
||
|
|
--
|
||
|
|
|
||
|
|
alaQoSImportTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF QoSImportEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Table of QoS Import definitions"
|
||
|
|
::= { alaQoSMIBObjects 42 }
|
||
|
|
|
||
|
|
alaQoSImportEntry OBJECT-TYPE
|
||
|
|
SYNTAX QoSImportEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Definition of QoS Import"
|
||
|
|
INDEX {
|
||
|
|
alaQoSImportIndex,
|
||
|
|
alaQoSImportText
|
||
|
|
}
|
||
|
|
::= { alaQoSImportTable 1 }
|
||
|
|
|
||
|
|
QoSImportEntry ::=
|
||
|
|
SEQUENCE
|
||
|
|
{
|
||
|
|
alaQoSImportIndex Integer32,
|
||
|
|
alaQoSImportText DisplayString,
|
||
|
|
alaQoSImportPrecedence Integer32,
|
||
|
|
alaQoSImportPrefix DisplayString,
|
||
|
|
alaQoSImportSlot Integer32,
|
||
|
|
alaQoSImportPort Integer32,
|
||
|
|
alaQoSImportPortend Integer32,
|
||
|
|
alaQoSImportPortgroup DisplayString,
|
||
|
|
alaQoSImportRowStatus RowStatus
|
||
|
|
}
|
||
|
|
|
||
|
|
alaQoSImportIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Index of entry in import list"
|
||
|
|
::= { alaQoSImportEntry 1 }
|
||
|
|
|
||
|
|
alaQoSImportText OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..63))
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Text or filename to import"
|
||
|
|
::= { alaQoSImportEntry 2 }
|
||
|
|
|
||
|
|
alaQoSImportPrecedence OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..65535)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Precedence to use for policies imported from file"
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { alaQoSImportEntry 3 }
|
||
|
|
|
||
|
|
alaQoSImportPrefix OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..11))
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Prefix for policy names that are imported"
|
||
|
|
::= { alaQoSImportEntry 4 }
|
||
|
|
|
||
|
|
alaQoSImportSlot OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..52)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Slot on which to apply imported policy(s)"
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { alaQoSImportEntry 5 }
|
||
|
|
|
||
|
|
alaQoSImportPort OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..16)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Starting port on which to apply imported policy(s)"
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { alaQoSImportEntry 6 }
|
||
|
|
|
||
|
|
alaQoSImportPortend OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..16)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Ending port on which to apply imported policy(s)"
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { alaQoSImportEntry 7 }
|
||
|
|
|
||
|
|
alaQoSImportPortgroup OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..31))
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Portgroup on which to apply imported policy(s)"
|
||
|
|
::= { alaQoSImportEntry 8 }
|
||
|
|
|
||
|
|
alaQoSImportRowStatus OBJECT-TYPE
|
||
|
|
SYNTAX RowStatus
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Used to create/delete imports according to the
|
||
|
|
RowStatus convention"
|
||
|
|
::= { alaQoSImportEntry 9 }
|
||
|
|
|
||
|
|
|
||
|
|
--
|
||
|
|
-- Definition of import table
|
||
|
|
--
|
||
|
|
|
||
|
|
alaQoSAppliedImportTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF QoSAppliedImportEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Table of QoS AppliedImport definitions"
|
||
|
|
::= { alaQoSMIBObjects 43 }
|
||
|
|
|
||
|
|
alaQoSAppliedImportEntry OBJECT-TYPE
|
||
|
|
SYNTAX QoSAppliedImportEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Definition of QoS AppliedImport"
|
||
|
|
INDEX {
|
||
|
|
alaQoSAppliedImportIndex,
|
||
|
|
alaQoSAppliedImportText
|
||
|
|
}
|
||
|
|
::= { alaQoSAppliedImportTable 1 }
|
||
|
|
|
||
|
|
QoSAppliedImportEntry ::=
|
||
|
|
SEQUENCE
|
||
|
|
{
|
||
|
|
alaQoSAppliedImportIndex Integer32,
|
||
|
|
alaQoSAppliedImportText DisplayString,
|
||
|
|
alaQoSAppliedImportPrecedence Integer32,
|
||
|
|
alaQoSAppliedImportPrefix DisplayString,
|
||
|
|
alaQoSAppliedImportSlot Integer32,
|
||
|
|
alaQoSAppliedImportPort Integer32,
|
||
|
|
alaQoSAppliedImportPortend Integer32,
|
||
|
|
alaQoSAppliedImportPortgroup DisplayString,
|
||
|
|
alaQoSAppliedImportRowStatus RowStatus
|
||
|
|
}
|
||
|
|
|
||
|
|
alaQoSAppliedImportIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Index of entry in import list"
|
||
|
|
::= { alaQoSAppliedImportEntry 1 }
|
||
|
|
|
||
|
|
alaQoSAppliedImportText OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..63))
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Text or filename to import"
|
||
|
|
::= { alaQoSAppliedImportEntry 2 }
|
||
|
|
|
||
|
|
alaQoSAppliedImportPrecedence OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..65535)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Precedence to use for policies imported from file"
|
||
|
|
::= { alaQoSAppliedImportEntry 3 }
|
||
|
|
|
||
|
|
alaQoSAppliedImportPrefix OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..11))
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Prefix for policy names that are imported"
|
||
|
|
::= { alaQoSAppliedImportEntry 4 }
|
||
|
|
|
||
|
|
alaQoSAppliedImportSlot OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..52)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Slot on which to apply imported policy(s)"
|
||
|
|
::= { alaQoSAppliedImportEntry 5 }
|
||
|
|
|
||
|
|
alaQoSAppliedImportPort OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..16)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Starting port on which to apply imported policy(s)"
|
||
|
|
::= { alaQoSAppliedImportEntry 6 }
|
||
|
|
|
||
|
|
alaQoSAppliedImportPortend OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..16)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Ending port on which to apply imported policy(s)"
|
||
|
|
::= { alaQoSAppliedImportEntry 7 }
|
||
|
|
|
||
|
|
alaQoSAppliedImportPortgroup OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..31))
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Portgroup on which to apply imported policy(s)"
|
||
|
|
::= { alaQoSAppliedImportEntry 8 }
|
||
|
|
|
||
|
|
alaQoSAppliedImportRowStatus OBJECT-TYPE
|
||
|
|
SYNTAX RowStatus
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Used to create/delete imports according to the
|
||
|
|
RowStatus convention"
|
||
|
|
::= { alaQoSAppliedImportEntry 9 }
|
||
|
|
|
||
|
|
--
|
||
|
|
-- Definition of Rule group table
|
||
|
|
--
|
||
|
|
|
||
|
|
alaQoSRuleGroupsTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF QoSRuleGroupsEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Table of QoS RuleGroups definitions"
|
||
|
|
::= { alaQoSMIBObjects 44 }
|
||
|
|
|
||
|
|
alaQoSRuleGroupsEntry OBJECT-TYPE
|
||
|
|
SYNTAX QoSRuleGroupsEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Definition of QoS RuleGroups"
|
||
|
|
INDEX {
|
||
|
|
alaQoSRuleGroupsName
|
||
|
|
}
|
||
|
|
::= { alaQoSRuleGroupsTable 1 }
|
||
|
|
|
||
|
|
QoSRuleGroupsEntry ::=
|
||
|
|
SEQUENCE
|
||
|
|
{
|
||
|
|
alaQoSRuleGroupsName DisplayString,
|
||
|
|
alaQoSRuleGroupsSource INTEGER,
|
||
|
|
alaQoSRuleGroupsType INTEGER,
|
||
|
|
alaQoSRuleGroupsEnabled INTEGER,
|
||
|
|
alaQoSRuleGroupsStatus RowStatus
|
||
|
|
}
|
||
|
|
|
||
|
|
alaQoSRuleGroupsName OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..31))
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Name of rule group"
|
||
|
|
::= { alaQoSRuleGroupsEntry 1 }
|
||
|
|
|
||
|
|
alaQoSRuleGroupsSource OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
ldap (1),
|
||
|
|
cli (2),
|
||
|
|
blt (3),
|
||
|
|
api (4),
|
||
|
|
imp (5)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "What entity created the rule group."
|
||
|
|
DEFVAL { cli }
|
||
|
|
::= { alaQoSRuleGroupsEntry 2 }
|
||
|
|
|
||
|
|
alaQoSRuleGroupsType OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
default (1),
|
||
|
|
unp (2),
|
||
|
|
vrf (3),
|
||
|
|
ingress (4),
|
||
|
|
egress (5),
|
||
|
|
slb (6)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Type of rule group."
|
||
|
|
DEFVAL { unp }
|
||
|
|
::= { alaQoSRuleGroupsEntry 3 }
|
||
|
|
|
||
|
|
alaQoSRuleGroupsEnabled OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable (1),
|
||
|
|
disable (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Is this rule grop enabled or not"
|
||
|
|
DEFVAL { enable }
|
||
|
|
::= { alaQoSRuleGroupsEntry 4 }
|
||
|
|
|
||
|
|
alaQoSRuleGroupsStatus OBJECT-TYPE
|
||
|
|
SYNTAX RowStatus
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Used to create/delete rule groups according to the
|
||
|
|
RowStatus convention"
|
||
|
|
::= { alaQoSRuleGroupsEntry 5 }
|
||
|
|
|
||
|
|
|
||
|
|
--
|
||
|
|
-- Definition of rule group table
|
||
|
|
--
|
||
|
|
|
||
|
|
alaQoSAppliedRuleGroupsTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF QoSAppliedRuleGroupsEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Table of QoS AppliedRuleGroups definitions"
|
||
|
|
::= { alaQoSMIBObjects 45 }
|
||
|
|
|
||
|
|
alaQoSAppliedRuleGroupsEntry OBJECT-TYPE
|
||
|
|
SYNTAX QoSAppliedRuleGroupsEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Definition of QoS AppliedRuleGroups"
|
||
|
|
INDEX {
|
||
|
|
alaQoSAppliedRuleGroupsName
|
||
|
|
}
|
||
|
|
::= { alaQoSAppliedRuleGroupsTable 1 }
|
||
|
|
|
||
|
|
QoSAppliedRuleGroupsEntry ::=
|
||
|
|
SEQUENCE
|
||
|
|
{
|
||
|
|
alaQoSAppliedRuleGroupsName DisplayString,
|
||
|
|
alaQoSAppliedRuleGroupsSource INTEGER,
|
||
|
|
alaQoSAppliedRuleGroupsType INTEGER,
|
||
|
|
alaQoSAppliedRuleGroupsEnabled INTEGER,
|
||
|
|
alaQoSAppliedRuleGroupsStatus RowStatus
|
||
|
|
}
|
||
|
|
|
||
|
|
alaQoSAppliedRuleGroupsName OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..31))
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Name of rule group"
|
||
|
|
::= { alaQoSAppliedRuleGroupsEntry 1 }
|
||
|
|
|
||
|
|
alaQoSAppliedRuleGroupsSource OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
ldap (1),
|
||
|
|
cli (2),
|
||
|
|
blt (3),
|
||
|
|
api (4),
|
||
|
|
imp (5)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "What entity created the service group."
|
||
|
|
DEFVAL { cli }
|
||
|
|
::= { alaQoSAppliedRuleGroupsEntry 2 }
|
||
|
|
|
||
|
|
alaQoSAppliedRuleGroupsType OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
defualt (1),
|
||
|
|
unp (2),
|
||
|
|
vrf (3),
|
||
|
|
ingress (4),
|
||
|
|
egress (5),
|
||
|
|
slb (6)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "What entity created the rule group."
|
||
|
|
::= { alaQoSAppliedRuleGroupsEntry 3 }
|
||
|
|
|
||
|
|
alaQoSAppliedRuleGroupsEnabled OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable (1),
|
||
|
|
disable (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Is this rule grop enabled or not"
|
||
|
|
::= { alaQoSAppliedRuleGroupsEntry 4 }
|
||
|
|
|
||
|
|
alaQoSAppliedRuleGroupsStatus OBJECT-TYPE
|
||
|
|
SYNTAX RowStatus
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Used to create/delete rule groups according to the
|
||
|
|
RowStatus convention"
|
||
|
|
::= { alaQoSAppliedRuleGroupsEntry 5 }
|
||
|
|
|
||
|
|
--
|
||
|
|
-- Definition of rule group entry table
|
||
|
|
--
|
||
|
|
|
||
|
|
alaQoSRuleGroupTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF QoSRuleGroupEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Table of QoS RuleGroup definitions"
|
||
|
|
::= { alaQoSMIBObjects 46 }
|
||
|
|
|
||
|
|
alaQoSRuleGroupEntry OBJECT-TYPE
|
||
|
|
SYNTAX QoSRuleGroupEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Definition of QoS RuleGroup"
|
||
|
|
INDEX {
|
||
|
|
alaQoSRuleGroupsName,
|
||
|
|
alaQoSRuleGroupRuleName
|
||
|
|
}
|
||
|
|
::= { alaQoSRuleGroupTable 1 }
|
||
|
|
|
||
|
|
QoSRuleGroupEntry ::=
|
||
|
|
SEQUENCE
|
||
|
|
{
|
||
|
|
alaQoSRuleGroupRuleName DisplayString,
|
||
|
|
alaQoSRuleGroupMatches Counter32,
|
||
|
|
alaQoSRuleGroupCountType INTEGER,
|
||
|
|
alaQoSRuleGroupPacketCount Counter64,
|
||
|
|
alaQoSRuleGroupByteCount Counter64,
|
||
|
|
alaQoSRuleGroupStatus RowStatus
|
||
|
|
}
|
||
|
|
|
||
|
|
alaQoSRuleGroupRuleName OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..31))
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Name of rule in rule group entry"
|
||
|
|
::= { alaQoSRuleGroupEntry 1 }
|
||
|
|
|
||
|
|
alaQoSRuleGroupMatches OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Number of times this rule has been matched."
|
||
|
|
::= { alaQoSRuleGroupEntry 2 }
|
||
|
|
|
||
|
|
alaQoSRuleGroupCountType OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
packets (1),
|
||
|
|
bytes (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Which rule statistics counters to update if not all are available"
|
||
|
|
DEFVAL { packets }
|
||
|
|
::= { alaQoSRuleGroupEntry 3 }
|
||
|
|
|
||
|
|
alaQoSRuleGroupPacketCount OBJECT-TYPE
|
||
|
|
SYNTAX Counter64
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Counter for packets patching this rule"
|
||
|
|
::= { alaQoSRuleGroupEntry 4 }
|
||
|
|
|
||
|
|
alaQoSRuleGroupByteCount OBJECT-TYPE
|
||
|
|
SYNTAX Counter64
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Counter for bytes matching this rule"
|
||
|
|
::= { alaQoSRuleGroupEntry 5 }
|
||
|
|
|
||
|
|
alaQoSRuleGroupStatus OBJECT-TYPE
|
||
|
|
SYNTAX RowStatus
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Used to create/delete rule group entries according to the
|
||
|
|
RowStatus convention"
|
||
|
|
::= { alaQoSRuleGroupEntry 6 }
|
||
|
|
|
||
|
|
|
||
|
|
--
|
||
|
|
-- Definition of rule group entry table
|
||
|
|
--
|
||
|
|
|
||
|
|
alaQoSAppliedRuleGroupTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF QoSAppliedRuleGroupEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Table of QoS AppliedRuleGroup definitions"
|
||
|
|
::= { alaQoSMIBObjects 47 }
|
||
|
|
|
||
|
|
alaQoSAppliedRuleGroupEntry OBJECT-TYPE
|
||
|
|
SYNTAX QoSAppliedRuleGroupEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Definition of QoS AppliedRuleGroup"
|
||
|
|
INDEX {
|
||
|
|
alaQoSAppliedRuleGroupsName,
|
||
|
|
alaQoSAppliedRuleGroupRuleName
|
||
|
|
}
|
||
|
|
::= { alaQoSAppliedRuleGroupTable 1 }
|
||
|
|
|
||
|
|
QoSAppliedRuleGroupEntry ::=
|
||
|
|
SEQUENCE
|
||
|
|
{
|
||
|
|
alaQoSAppliedRuleGroupRuleName DisplayString,
|
||
|
|
alaQoSAppliedRuleGroupMatches Counter32,
|
||
|
|
alaQoSAppliedRuleGroupCountType INTEGER,
|
||
|
|
alaQoSAppliedRuleGroupPacketCount Counter64,
|
||
|
|
alaQoSAppliedRuleGroupByteCount Counter64,
|
||
|
|
alaQoSAppliedRuleGroupStatus RowStatus
|
||
|
|
}
|
||
|
|
|
||
|
|
alaQoSAppliedRuleGroupRuleName OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..31))
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Name of rule in rule group entry"
|
||
|
|
::= { alaQoSAppliedRuleGroupEntry 1 }
|
||
|
|
|
||
|
|
alaQoSAppliedRuleGroupMatches OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Number of times this rule has been matched."
|
||
|
|
::= { alaQoSAppliedRuleGroupEntry 2 }
|
||
|
|
|
||
|
|
alaQoSAppliedRuleGroupCountType OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
packets (1),
|
||
|
|
bytes (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Which rule statistics counters to update if not all are available"
|
||
|
|
DEFVAL { packets }
|
||
|
|
::= { alaQoSAppliedRuleGroupEntry 3 }
|
||
|
|
|
||
|
|
alaQoSAppliedRuleGroupPacketCount OBJECT-TYPE
|
||
|
|
SYNTAX Counter64
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Counter for packets patching this rule"
|
||
|
|
::= { alaQoSAppliedRuleGroupEntry 4 }
|
||
|
|
|
||
|
|
alaQoSAppliedRuleGroupByteCount OBJECT-TYPE
|
||
|
|
SYNTAX Counter64
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Counter for bytes matching this rule"
|
||
|
|
::= { alaQoSAppliedRuleGroupEntry 5 }
|
||
|
|
|
||
|
|
alaQoSAppliedRuleGroupStatus OBJECT-TYPE
|
||
|
|
SYNTAX RowStatus
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Used to create/delete rule group entries according to the
|
||
|
|
RowStatus convention"
|
||
|
|
::= { alaQoSAppliedRuleGroupEntry 6 }
|
||
|
|
|
||
|
|
|
||
|
|
alaQoSVlanGroupsTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF QoSVlanGroupsEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Table of QoS Vlan Groups definitions"
|
||
|
|
::= { alaQoSMIBObjects 48 }
|
||
|
|
|
||
|
|
alaQoSVlanGroupsEntry OBJECT-TYPE
|
||
|
|
SYNTAX QoSVlanGroupsEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Definition of QoS Vlan Groups"
|
||
|
|
INDEX {
|
||
|
|
alaQoSVlanGroupsName
|
||
|
|
}
|
||
|
|
::= { alaQoSVlanGroupsTable 1 }
|
||
|
|
|
||
|
|
QoSVlanGroupsEntry ::=
|
||
|
|
SEQUENCE
|
||
|
|
{
|
||
|
|
alaQoSVlanGroupsName DisplayString,
|
||
|
|
alaQoSVlanGroupsSource INTEGER,
|
||
|
|
alaQoSVlanGroupsStatus RowStatus
|
||
|
|
}
|
||
|
|
|
||
|
|
alaQoSVlanGroupsName OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..31))
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Name of Vlan group"
|
||
|
|
::= { alaQoSVlanGroupsEntry 1 }
|
||
|
|
|
||
|
|
alaQoSVlanGroupsSource OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
ldap (1),
|
||
|
|
cli (2),
|
||
|
|
blt (3),
|
||
|
|
api (4),
|
||
|
|
imp (5)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "What entity created the Vlan group."
|
||
|
|
DEFVAL { cli }
|
||
|
|
::= { alaQoSVlanGroupsEntry 2 }
|
||
|
|
|
||
|
|
alaQoSVlanGroupsStatus OBJECT-TYPE
|
||
|
|
SYNTAX RowStatus
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Used to create/delete Vlan groups according to the
|
||
|
|
RowStatus convention"
|
||
|
|
::= { alaQoSVlanGroupsEntry 3 }
|
||
|
|
|
||
|
|
-- Applied Object syntax
|
||
|
|
|
||
|
|
alaQoSAppliedVlanGroupsTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF QoSAppliedVlanGroupsEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Table of QoS Applied Vlan Groups definitions"
|
||
|
|
::= { alaQoSMIBObjects 49 }
|
||
|
|
|
||
|
|
alaQoSAppliedVlanGroupsEntry OBJECT-TYPE
|
||
|
|
SYNTAX QoSAppliedVlanGroupsEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Definition of QoS Applied Vlan Groups"
|
||
|
|
INDEX {
|
||
|
|
alaQoSAppliedVlanGroupsName
|
||
|
|
}
|
||
|
|
::= { alaQoSAppliedVlanGroupsTable 1 }
|
||
|
|
|
||
|
|
QoSAppliedVlanGroupsEntry ::=
|
||
|
|
SEQUENCE
|
||
|
|
{
|
||
|
|
alaQoSAppliedVlanGroupsName DisplayString,
|
||
|
|
alaQoSAppliedVlanGroupsSource INTEGER,
|
||
|
|
alaQoSAppliedVlanGroupsStatus RowStatus
|
||
|
|
}
|
||
|
|
|
||
|
|
alaQoSAppliedVlanGroupsName OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..31))
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Name of Applied Vlan group"
|
||
|
|
::= { alaQoSAppliedVlanGroupsEntry 1 }
|
||
|
|
|
||
|
|
alaQoSAppliedVlanGroupsSource OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
ldap (1),
|
||
|
|
cli (2),
|
||
|
|
blt (3),
|
||
|
|
api (4),
|
||
|
|
imp (5)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "What entity created the Vlan group."
|
||
|
|
DEFVAL { cli }
|
||
|
|
::= { alaQoSAppliedVlanGroupsEntry 2 }
|
||
|
|
|
||
|
|
alaQoSAppliedVlanGroupsStatus OBJECT-TYPE
|
||
|
|
SYNTAX RowStatus
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Used to create/delete Vlan groups according to the
|
||
|
|
RowStatus convention"
|
||
|
|
::= { alaQoSAppliedVlanGroupsEntry 3 }
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
-- Definition of Vlan group entry table
|
||
|
|
|
||
|
|
alaQoSVlanGroupTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF QoSVlanGroupEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Table of QoS Vlan Group definitions"
|
||
|
|
::= { alaQoSMIBObjects 50 }
|
||
|
|
|
||
|
|
alaQoSVlanGroupEntry OBJECT-TYPE
|
||
|
|
SYNTAX QoSVlanGroupEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Definition of QoS Vlan Group"
|
||
|
|
INDEX {
|
||
|
|
alaQoSVlanGroupsName,
|
||
|
|
alaQoSVlanGroupVlan,
|
||
|
|
alaQoSVlanGroupVlanEnd
|
||
|
|
}
|
||
|
|
::= { alaQoSVlanGroupTable 1 }
|
||
|
|
|
||
|
|
QoSVlanGroupEntry ::=
|
||
|
|
SEQUENCE
|
||
|
|
{
|
||
|
|
alaQoSVlanGroupVlan Integer32,
|
||
|
|
alaQoSVlanGroupVlanEnd Integer32,
|
||
|
|
alaQoSVlanGroupStatus RowStatus
|
||
|
|
}
|
||
|
|
|
||
|
|
alaQoSVlanGroupVlan OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..16)
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Vlan range start for vlan group entry"
|
||
|
|
::= { alaQoSVlanGroupEntry 1 }
|
||
|
|
|
||
|
|
alaQoSVlanGroupVlanEnd OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..16)
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Vlan range end for vlan group entry"
|
||
|
|
::= { alaQoSVlanGroupEntry 2 }
|
||
|
|
|
||
|
|
|
||
|
|
alaQoSVlanGroupStatus OBJECT-TYPE
|
||
|
|
SYNTAX RowStatus
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Used to create/delete vlan group entries according to the
|
||
|
|
RowStatus convention"
|
||
|
|
::= { alaQoSVlanGroupEntry 3 }
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
-- Definition of Applied vlan group entry table
|
||
|
|
|
||
|
|
alaQoSAppliedVlanGroupTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF QoSAppliedVlanGroupEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Table of QoS Applied Vlan Group definitions"
|
||
|
|
::= { alaQoSMIBObjects 51 }
|
||
|
|
|
||
|
|
alaQoSAppliedVlanGroupEntry OBJECT-TYPE
|
||
|
|
SYNTAX QoSAppliedVlanGroupEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Definition of QoS Applied Vlan Group"
|
||
|
|
INDEX {
|
||
|
|
alaQoSAppliedVlanGroupsName,
|
||
|
|
alaQoSAppliedVlanGroupVlan,
|
||
|
|
alaQoSAppliedVlanGroupVlanEnd
|
||
|
|
}
|
||
|
|
::= { alaQoSAppliedVlanGroupTable 1 }
|
||
|
|
|
||
|
|
QoSAppliedVlanGroupEntry ::=
|
||
|
|
SEQUENCE
|
||
|
|
{
|
||
|
|
alaQoSAppliedVlanGroupVlan Integer32,
|
||
|
|
alaQoSAppliedVlanGroupVlanEnd Integer32,
|
||
|
|
alaQoSAppliedVlanGroupStatus RowStatus
|
||
|
|
}
|
||
|
|
|
||
|
|
alaQoSAppliedVlanGroupVlan OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..4095)
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Vlan range start for vlan group entry"
|
||
|
|
::= { alaQoSAppliedVlanGroupEntry 1 }
|
||
|
|
|
||
|
|
alaQoSAppliedVlanGroupVlanEnd OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..4095)
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Vlan range end for vlan group entry"
|
||
|
|
::= { alaQoSAppliedVlanGroupEntry 2 }
|
||
|
|
|
||
|
|
alaQoSAppliedVlanGroupStatus OBJECT-TYPE
|
||
|
|
SYNTAX RowStatus
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Used to create/delete vlan group entries according
|
||
|
|
to the RowStatus convention"
|
||
|
|
::= { alaQoSAppliedVlanGroupEntry 3 }
|
||
|
|
|
||
|
|
alaQoSHwLoopbackProfileTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF QoSHwLoopbackProfileEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Table of QoS Hw Loopback Profiles"
|
||
|
|
::= { alaQoSMIBObjects 52 }
|
||
|
|
|
||
|
|
alaQoSHwLoopbackProfileEntry OBJECT-TYPE
|
||
|
|
SYNTAX QoSHwLoopbackProfileEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Definition of QoS Hw Loopback Profiles "
|
||
|
|
INDEX {
|
||
|
|
alaQoSHwLoopbackProfileName
|
||
|
|
}
|
||
|
|
::= { alaQoSHwLoopbackProfileTable 1 }
|
||
|
|
|
||
|
|
QoSHwLoopbackProfileEntry ::=
|
||
|
|
SEQUENCE
|
||
|
|
{
|
||
|
|
alaQoSHwLoopbackProfileName DisplayString,
|
||
|
|
alaQoSHwLoopbackSourceMac MacAddress,
|
||
|
|
alaQoSHwLoopbackDestinationMac MacAddress,
|
||
|
|
alaQoSHwLoopbackVlan Integer32,
|
||
|
|
alaQoSHwLoopbackPort InterfaceIndex,
|
||
|
|
alaQoSHwLoopbackType INTEGER,
|
||
|
|
alaQoSHwLoopbackProfileStatus INTEGER,
|
||
|
|
alaQoSHwLoopbackProfileRowStatus RowStatus
|
||
|
|
}
|
||
|
|
|
||
|
|
alaQoSHwLoopbackProfileName OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(1..31))
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Name of Profile Name"
|
||
|
|
::= { alaQoSHwLoopbackProfileEntry 1 }
|
||
|
|
|
||
|
|
alaQoSHwLoopbackSourceMac OBJECT-TYPE
|
||
|
|
SYNTAX MacAddress
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Source MAC address to use for Hardware Loopback
|
||
|
|
profile configuration"
|
||
|
|
DEFVAL { '000000000000'h }
|
||
|
|
::= { alaQoSHwLoopbackProfileEntry 2 }
|
||
|
|
|
||
|
|
alaQoSHwLoopbackDestinationMac OBJECT-TYPE
|
||
|
|
SYNTAX MacAddress
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Destination MAC address to use for Hardware Loopback
|
||
|
|
profile configuration"
|
||
|
|
DEFVAL { '000000000000'h }
|
||
|
|
::= { alaQoSHwLoopbackProfileEntry 3 }
|
||
|
|
|
||
|
|
alaQoSHwLoopbackVlan OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..4094)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Vlan used in Hardware Loopback Profile Config"
|
||
|
|
::= { alaQoSHwLoopbackProfileEntry 4 }
|
||
|
|
|
||
|
|
alaQoSHwLoopbackPort OBJECT-TYPE
|
||
|
|
SYNTAX InterfaceIndex
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Loopback Port ifindex used in Hardware Loopback Profile Config"
|
||
|
|
::= { alaQoSHwLoopbackProfileEntry 5 }
|
||
|
|
|
||
|
|
alaQoSHwLoopbackType OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
inward (1),
|
||
|
|
outward (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The type of Hardware Profile Config, inward and outward"
|
||
|
|
::= { alaQoSHwLoopbackProfileEntry 6 }
|
||
|
|
|
||
|
|
alaQoSHwLoopbackProfileStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
config (0),
|
||
|
|
start (1),
|
||
|
|
stop (2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The status of the Hardware Profile Config"
|
||
|
|
::= { alaQoSHwLoopbackProfileEntry 7 }
|
||
|
|
|
||
|
|
alaQoSHwLoopbackProfileRowStatus OBJECT-TYPE
|
||
|
|
SYNTAX RowStatus
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Used to create/delete the Profile Config"
|
||
|
|
::= { alaQoSHwLoopbackProfileEntry 8 }
|
||
|
|
|
||
|
|
alaQoSMIBConformance OBJECT-IDENTITY
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Branch for QoS Managed Conformance Information."
|
||
|
|
::= { alaQoSMIB 2 }
|
||
|
|
|
||
|
|
alaQoSMIBGroups OBJECT-IDENTITY
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Branch for QoS Units of Conformance."
|
||
|
|
::= { alaQoSMIBConformance 1 }
|
||
|
|
|
||
|
|
alaQoSMIBCompliances OBJECT-IDENTITY
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Branch for QoS Compliance Statements."
|
||
|
|
::= { alaQoSMIBConformance 2 }
|
||
|
|
|
||
|
|
alaQoSMIBRuleObjects OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
alaQoSRuleEnabled,
|
||
|
|
alaQoSRuleSource,
|
||
|
|
alaQoSRulePrecedence,
|
||
|
|
alaQoSRuleCondition,
|
||
|
|
alaQoSRuleAction,
|
||
|
|
alaQoSRuleReflexive,
|
||
|
|
alaQoSRuleSave,
|
||
|
|
alaQoSRuleLog,
|
||
|
|
alaQoSRuleMatches,
|
||
|
|
alaQoSRuleEnforced,
|
||
|
|
alaQoSRuleActive,
|
||
|
|
alaQoSRuleRowStatus,
|
||
|
|
alaQoSRuleValidityPeriod,
|
||
|
|
alaQoSRuleValidityPeriodStatus,
|
||
|
|
alaQoSRuleLogInterval,
|
||
|
|
alaQoSRuleCountType,
|
||
|
|
alaQoSRulePacketCount,
|
||
|
|
alaQoSRuleByteCount,
|
||
|
|
alaQoSRuleExcessPacketCount,
|
||
|
|
alaQoSRuleExcessByteCount,
|
||
|
|
alaQoSRuleType,
|
||
|
|
alaQoSRuleTrapEvents,
|
||
|
|
alaQoSRuleDefaultList,
|
||
|
|
alaQoSRuleGreenCount,
|
||
|
|
alaQoSRuleYellowCount,
|
||
|
|
alaQoSRuleRedCount,
|
||
|
|
alaQoSRuleNonGreenCount,
|
||
|
|
alaQoSRuleNonRedCount
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Collections of objects providing information for Rules"
|
||
|
|
::= { alaQoSMIBGroups 1 }
|
||
|
|
|
||
|
|
alaQoSMIBAppliedRuleObjects OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
alaQoSAppliedRuleEnabled,
|
||
|
|
alaQoSAppliedRuleSource,
|
||
|
|
alaQoSAppliedRulePrecedence,
|
||
|
|
alaQoSAppliedRuleCondition,
|
||
|
|
alaQoSAppliedRuleAction,
|
||
|
|
alaQoSAppliedRuleReflexive,
|
||
|
|
alaQoSAppliedRuleSave,
|
||
|
|
alaQoSAppliedRuleLog,
|
||
|
|
alaQoSAppliedRuleMatches,
|
||
|
|
alaQoSAppliedRuleEnforced,
|
||
|
|
alaQoSAppliedRuleActive,
|
||
|
|
alaQoSAppliedRuleRowStatus,
|
||
|
|
alaQoSAppliedRuleValidityPeriod,
|
||
|
|
alaQoSAppliedRuleValidityPeriodStatus,
|
||
|
|
alaQoSAppliedRuleLogInterval,
|
||
|
|
alaQoSAppliedRuleCountType,
|
||
|
|
alaQoSAppliedRulePacketCount,
|
||
|
|
alaQoSAppliedRuleByteCount,
|
||
|
|
alaQoSAppliedRuleExcessPacketCount,
|
||
|
|
alaQoSAppliedRuleExcessByteCount,
|
||
|
|
alaQoSAppliedRuleType,
|
||
|
|
alaQoSAppliedRuleTrapEvents,
|
||
|
|
alaQoSAppliedRuleDefaultList,
|
||
|
|
alaQoSAppliedRuleGreenCount,
|
||
|
|
alaQoSAppliedRuleYellowCount,
|
||
|
|
alaQoSAppliedRuleRedCount,
|
||
|
|
alaQoSAppliedRuleNonGreenCount,
|
||
|
|
alaQoSAppliedRuleNonRedCount
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Collections of objects providing information
|
||
|
|
for applied Rules"
|
||
|
|
::= { alaQoSMIBGroups 2 }
|
||
|
|
|
||
|
|
alaQoSMIBConditionObjects OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
alaQoSConditionSource,
|
||
|
|
alaQoSConditionSourceSlot,
|
||
|
|
alaQoSConditionSourceSlotStatus,
|
||
|
|
alaQoSConditionSourcePort,
|
||
|
|
alaQoSConditionSourcePortGroup,
|
||
|
|
alaQoSConditionSourcePortGroupStatus,
|
||
|
|
alaQoSConditionDestinationSlot,
|
||
|
|
alaQoSConditionDestinationSlotStatus,
|
||
|
|
alaQoSConditionDestinationPort,
|
||
|
|
alaQoSConditionDestinationPortGroup,
|
||
|
|
alaQoSConditionDestinationPortGroupStatus,
|
||
|
|
alaQoSConditionSourceInterfaceType,
|
||
|
|
alaQoSConditionSourceInterfaceTypeStatus,
|
||
|
|
alaQoSConditionDestinationInterfaceType,
|
||
|
|
alaQoSConditionDestinationInterfaceTypeStatus,
|
||
|
|
alaQoSConditionSourceMacAddr,
|
||
|
|
alaQoSConditionSourceMacAddrStatus,
|
||
|
|
alaQoSConditionSourceMacMask,
|
||
|
|
alaQoSConditionSourceMacGroup,
|
||
|
|
alaQoSConditionSourceMacGroupStatus,
|
||
|
|
alaQoSConditionDestinationMacAddr,
|
||
|
|
alaQoSConditionDestinationMacAddrStatus,
|
||
|
|
alaQoSConditionDestinationMacMask,
|
||
|
|
alaQoSConditionDestinationMacGroup,
|
||
|
|
alaQoSConditionDestinationMacGroupStatus,
|
||
|
|
alaQoSConditionSourceVlan,
|
||
|
|
alaQoSConditionSourceVlanStatus,
|
||
|
|
alaQoSConditionDestinationVlan,
|
||
|
|
alaQoSConditionDestinationVlanStatus,
|
||
|
|
alaQoSCondition8021p,
|
||
|
|
alaQoSCondition8021pStatus,
|
||
|
|
alaQoSConditionSourceIpAddr,
|
||
|
|
alaQoSConditionSourceIpAddrStatus,
|
||
|
|
alaQoSConditionSourceIpMask,
|
||
|
|
alaQoSConditionSourceNetworkGroup,
|
||
|
|
alaQoSConditionSourceNetworkGroupStatus,
|
||
|
|
alaQoSConditionDestinationIpAddr,
|
||
|
|
alaQoSConditionDestinationIpAddrStatus,
|
||
|
|
alaQoSConditionDestinationIpMask,
|
||
|
|
alaQoSConditionDestinationNetworkGroup,
|
||
|
|
alaQoSConditionDestinationNetworkGroupStatus,
|
||
|
|
alaQoSConditionMulticastIpAddr,
|
||
|
|
alaQoSConditionMulticastIpAddrStatus,
|
||
|
|
alaQoSConditionMulticastIpMask,
|
||
|
|
alaQoSConditionMulticastNetworkGroup,
|
||
|
|
alaQoSConditionMulticastNetworkGroupStatus,
|
||
|
|
alaQoSConditionTos,
|
||
|
|
alaQoSConditionTosStatus,
|
||
|
|
alaQoSConditionTosMask,
|
||
|
|
alaQoSConditionDscp,
|
||
|
|
alaQoSConditionDscpStatus,
|
||
|
|
alaQoSConditionDscpMask,
|
||
|
|
alaQoSConditionIpProtocol,
|
||
|
|
alaQoSConditionIpProtocolStatus,
|
||
|
|
alaQoSConditionSourceIpPort,
|
||
|
|
alaQoSConditionSourceIpPortStatus,
|
||
|
|
alaQoSConditionDestinationIpPort,
|
||
|
|
alaQoSConditionDestinationIpPortStatus,
|
||
|
|
alaQoSConditionService,
|
||
|
|
alaQoSConditionServiceStatus,
|
||
|
|
alaQoSConditionServiceGroup,
|
||
|
|
alaQoSConditionServiceGroupStatus,
|
||
|
|
alaQoSConditionIcmpType,
|
||
|
|
alaQoSConditionIcmpTypeStatus,
|
||
|
|
alaQoSConditionIcmpCode,
|
||
|
|
alaQoSConditionIcmpCodeStatus,
|
||
|
|
alaQoSConditionDlci,
|
||
|
|
alaQoSConditionDlciStatus,
|
||
|
|
alaQoSConditionRowStatus,
|
||
|
|
alaQoSConditionSourcePortEnd,
|
||
|
|
alaQoSConditionDestinationPortEnd,
|
||
|
|
alaQoSConditionSourceIpPortEnd,
|
||
|
|
alaQoSConditionDestinationIpPortEnd,
|
||
|
|
alaQoSConditionSourceTcpPort,
|
||
|
|
alaQoSConditionSourceTcpPortStatus,
|
||
|
|
alaQoSConditionSourceTcpPortEnd,
|
||
|
|
alaQoSConditionDestinationTcpPort,
|
||
|
|
alaQoSConditionDestinationTcpPortStatus,
|
||
|
|
alaQoSConditionDestinationTcpPortEnd,
|
||
|
|
alaQoSConditionSourceUdpPort,
|
||
|
|
alaQoSConditionSourceUdpPortStatus,
|
||
|
|
alaQoSConditionSourceUdpPortEnd,
|
||
|
|
alaQoSConditionDestinationUdpPort,
|
||
|
|
alaQoSConditionDestinationUdpPortStatus,
|
||
|
|
alaQoSConditionDestinationUdpPortEnd,
|
||
|
|
alaQoSConditionEthertype,
|
||
|
|
alaQoSConditionEthertypeStatus,
|
||
|
|
alaQoSConditionTcpFlags,
|
||
|
|
alaQoSConditionTcpFlagsStatus,
|
||
|
|
alaQoSConditionTcpFlagsVal,
|
||
|
|
alaQoSConditionTcpFlagsValStatus,
|
||
|
|
alaQoSConditionTcpFlagsMask,
|
||
|
|
alaQoSConditionTcpFlagsMaskStatus,
|
||
|
|
alaQoSConditionTcpEstablished,
|
||
|
|
alaQoSConditionSourceIpv6Addr,
|
||
|
|
alaQoSConditionSourceIpv6AddrStatus,
|
||
|
|
alaQoSConditionSourceIpv6Mask,
|
||
|
|
alaQoSConditionDestinationIpv6Addr,
|
||
|
|
alaQoSConditionDestinationIpv6AddrStatus,
|
||
|
|
alaQoSConditionDestinationIpv6Mask,
|
||
|
|
alaQoSConditionIpv6Traffic,
|
||
|
|
alaQoSConditionIpv6NH,
|
||
|
|
alaQoSConditionIpv6NHStatus,
|
||
|
|
alaQoSConditionIpv6FlowLabel,
|
||
|
|
alaQoSConditionIpv6FlowLabelStatus,
|
||
|
|
alaQoSConditionMcastIpv6Addr,
|
||
|
|
alaQoSConditionMcastIpv6AddrStatus,
|
||
|
|
alaQoSConditionMcastIpv6Mask,
|
||
|
|
alaQoSConditionDscpEnd,
|
||
|
|
alaQoSConditionInnerSourceVlan,
|
||
|
|
alaQoSConditionInnerSourceVlanStatus,
|
||
|
|
alaQoSConditionInner8021p,
|
||
|
|
alaQoSConditionInner8021pStatus,
|
||
|
|
alaQoSConditionVrfName,
|
||
|
|
alaQoSConditionVrfNameStatus,
|
||
|
|
alaQoSCondition8021pEnd,
|
||
|
|
alaQoSConditionInner8021pEnd,
|
||
|
|
alaQoSConditionSourceVlanGroup,
|
||
|
|
alaQoSConditionSourceVlanGroupStatus,
|
||
|
|
alaQoSConditionInnerSourceVlanGroup,
|
||
|
|
alaQoSConditionInnerSourceVlanGroupStatus
|
||
|
|
}
|
||
|
|
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Collections of objects providing information for Conditions"
|
||
|
|
::= { alaQoSMIBGroups 3 }
|
||
|
|
|
||
|
|
alaQoSMIBAppliedConditionObjects OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
alaQoSAppliedConditionSource,
|
||
|
|
alaQoSAppliedConditionSourceSlot,
|
||
|
|
alaQoSAppliedConditionSourceSlotStatus,
|
||
|
|
alaQoSAppliedConditionSourcePort,
|
||
|
|
alaQoSAppliedConditionSourcePortGroup,
|
||
|
|
alaQoSAppliedConditionSourcePortGroupStatus,
|
||
|
|
alaQoSAppliedConditionDestinationSlot,
|
||
|
|
alaQoSAppliedConditionDestinationSlotStatus,
|
||
|
|
alaQoSAppliedConditionDestinationPort,
|
||
|
|
alaQoSAppliedConditionDestinationPortGroup,
|
||
|
|
alaQoSAppliedConditionDestinationPortGroupStatus,
|
||
|
|
alaQoSAppliedConditionSourceInterfaceType,
|
||
|
|
alaQoSAppliedConditionSourceInterfaceTypeStatus,
|
||
|
|
alaQoSAppliedConditionDestinationInterfaceType,
|
||
|
|
alaQoSAppliedConditionDestinationInterfaceTypeStatus,
|
||
|
|
alaQoSAppliedConditionSourceMacAddr,
|
||
|
|
alaQoSAppliedConditionSourceMacAddrStatus,
|
||
|
|
alaQoSAppliedConditionSourceMacMask,
|
||
|
|
alaQoSAppliedConditionSourceMacGroup,
|
||
|
|
alaQoSAppliedConditionSourceMacGroupStatus,
|
||
|
|
alaQoSAppliedConditionDestinationMacAddr,
|
||
|
|
alaQoSAppliedConditionDestinationMacAddrStatus,
|
||
|
|
alaQoSAppliedConditionDestinationMacMask,
|
||
|
|
alaQoSAppliedConditionDestinationMacGroup,
|
||
|
|
alaQoSAppliedConditionDestinationMacGroupStatus,
|
||
|
|
alaQoSAppliedConditionSourceVlan,
|
||
|
|
alaQoSAppliedConditionSourceVlanStatus,
|
||
|
|
alaQoSAppliedConditionDestinationVlan,
|
||
|
|
alaQoSAppliedConditionDestinationVlanStatus,
|
||
|
|
alaQoSAppliedCondition8021p,
|
||
|
|
alaQoSAppliedCondition8021pStatus,
|
||
|
|
alaQoSAppliedConditionSourceIpAddr,
|
||
|
|
alaQoSAppliedConditionSourceIpAddrStatus,
|
||
|
|
alaQoSAppliedConditionSourceIpMask,
|
||
|
|
alaQoSAppliedConditionSourceNetworkGroup,
|
||
|
|
alaQoSAppliedConditionSourceNetworkGroupStatus,
|
||
|
|
alaQoSAppliedConditionDestinationIpAddr,
|
||
|
|
alaQoSAppliedConditionDestinationIpAddrStatus,
|
||
|
|
alaQoSAppliedConditionDestinationIpMask,
|
||
|
|
alaQoSAppliedConditionDestinationNetworkGroup,
|
||
|
|
alaQoSAppliedConditionDestinationNetworkGroupStatus,
|
||
|
|
alaQoSAppliedConditionMulticastIpAddr,
|
||
|
|
alaQoSAppliedConditionMulticastIpAddrStatus,
|
||
|
|
alaQoSAppliedConditionMulticastIpMask,
|
||
|
|
alaQoSAppliedConditionMulticastNetworkGroup,
|
||
|
|
alaQoSAppliedConditionMulticastNetworkGroupStatus,
|
||
|
|
alaQoSAppliedConditionTos,
|
||
|
|
alaQoSAppliedConditionTosStatus,
|
||
|
|
alaQoSAppliedConditionTosMask,
|
||
|
|
alaQoSAppliedConditionDscp,
|
||
|
|
alaQoSAppliedConditionDscpStatus,
|
||
|
|
alaQoSAppliedConditionDscpMask,
|
||
|
|
alaQoSAppliedConditionIpProtocol,
|
||
|
|
alaQoSAppliedConditionIpProtocolStatus,
|
||
|
|
alaQoSAppliedConditionSourceIpPort,
|
||
|
|
alaQoSAppliedConditionSourceIpPortStatus,
|
||
|
|
alaQoSAppliedConditionDestinationIpPort,
|
||
|
|
alaQoSAppliedConditionDestinationIpPortStatus,
|
||
|
|
alaQoSAppliedConditionService,
|
||
|
|
alaQoSAppliedConditionServiceStatus,
|
||
|
|
alaQoSAppliedConditionServiceGroup,
|
||
|
|
alaQoSAppliedConditionServiceGroupStatus,
|
||
|
|
alaQoSAppliedConditionIcmpType,
|
||
|
|
alaQoSAppliedConditionIcmpTypeStatus,
|
||
|
|
alaQoSAppliedConditionIcmpCode,
|
||
|
|
alaQoSAppliedConditionIcmpCodeStatus,
|
||
|
|
alaQoSAppliedConditionDlci,
|
||
|
|
alaQoSAppliedConditionDlciStatus,
|
||
|
|
alaQoSAppliedConditionRowStatus,
|
||
|
|
alaQoSAppliedConditionSourcePortEnd,
|
||
|
|
alaQoSAppliedConditionDestinationPortEnd,
|
||
|
|
alaQoSAppliedConditionSourceIpPortEnd,
|
||
|
|
alaQoSAppliedConditionDestinationIpPortEnd,
|
||
|
|
alaQoSAppliedConditionSourceTcpPort,
|
||
|
|
alaQoSAppliedConditionSourceTcpPortStatus,
|
||
|
|
alaQoSAppliedConditionSourceTcpPortEnd,
|
||
|
|
alaQoSAppliedConditionDestinationTcpPort,
|
||
|
|
alaQoSAppliedConditionDestinationTcpPortStatus,
|
||
|
|
alaQoSAppliedConditionDestinationTcpPortEnd,
|
||
|
|
alaQoSAppliedConditionSourceUdpPort,
|
||
|
|
alaQoSAppliedConditionSourceUdpPortStatus,
|
||
|
|
alaQoSAppliedConditionSourceUdpPortEnd,
|
||
|
|
alaQoSAppliedConditionDestinationUdpPort,
|
||
|
|
alaQoSAppliedConditionDestinationUdpPortStatus,
|
||
|
|
alaQoSAppliedConditionDestinationUdpPortEnd,
|
||
|
|
alaQoSAppliedConditionEthertype,
|
||
|
|
alaQoSAppliedConditionEthertypeStatus,
|
||
|
|
alaQoSAppliedConditionTcpFlags,
|
||
|
|
alaQoSAppliedConditionTcpFlagsStatus,
|
||
|
|
alaQoSAppliedConditionTcpFlagsVal,
|
||
|
|
alaQoSAppliedConditionTcpFlagsValStatus,
|
||
|
|
alaQoSAppliedConditionTcpFlagsMask,
|
||
|
|
alaQoSAppliedConditionTcpFlagsMaskStatus,
|
||
|
|
alaQoSAppliedConditionTcpEstablished,
|
||
|
|
alaQoSAppliedConditionSourceIpv6Addr,
|
||
|
|
alaQoSAppliedConditionSourceIpv6AddrStatus,
|
||
|
|
alaQoSAppliedConditionSourceIpv6Mask,
|
||
|
|
alaQoSAppliedConditionDestinationIpv6Addr,
|
||
|
|
alaQoSAppliedConditionDestinationIpv6AddrStatus,
|
||
|
|
alaQoSAppliedConditionDestinationIpv6Mask,
|
||
|
|
alaQoSAppliedConditionIpv6Traffic,
|
||
|
|
alaQoSAppliedConditionIpv6NH,
|
||
|
|
alaQoSAppliedConditionIpv6NHStatus,
|
||
|
|
alaQoSAppliedConditionIpv6FlowLabel,
|
||
|
|
alaQoSAppliedConditionIpv6FlowLabelStatus,
|
||
|
|
alaQoSAppliedConditionMcastIpv6Addr,
|
||
|
|
alaQoSAppliedConditionMcastIpv6AddrStatus,
|
||
|
|
alaQoSAppliedConditionMcastIpv6Mask,
|
||
|
|
alaQoSAppliedConditionDscpEnd,
|
||
|
|
alaQoSAppliedConditionInnerSourceVlan,
|
||
|
|
alaQoSAppliedConditionInnerSourceVlanStatus,
|
||
|
|
alaQoSAppliedConditionInner8021p,
|
||
|
|
alaQoSAppliedConditionInner8021pStatus,
|
||
|
|
alaQoSAppliedConditionVrfName,
|
||
|
|
alaQoSAppliedConditionVrfNameStatus,
|
||
|
|
alaQoSAppliedCondition8021pEnd,
|
||
|
|
alaQoSAppliedConditionInner8021pEnd,
|
||
|
|
alaQoSAppliedConditionSourceVlanGroup,
|
||
|
|
alaQoSAppliedConditionSourceVlanGroupStatus,
|
||
|
|
alaQoSAppliedConditionInnerSourceVlanGroup,
|
||
|
|
alaQoSAppliedConditionInnerSourceVlanGroupStatus
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Collections of objects providing information
|
||
|
|
for applied Conditions"
|
||
|
|
::= { alaQoSMIBGroups 4 }
|
||
|
|
|
||
|
|
alaQoSMIBServiceObjects OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
alaQoSServiceSource,
|
||
|
|
alaQoSServiceProtocol,
|
||
|
|
alaQoSServiceSourceIpPort,
|
||
|
|
alaQoSServiceSourceIpPortStatus,
|
||
|
|
alaQoSServiceDestinationIpPort,
|
||
|
|
alaQoSServiceDestinationIpPortStatus,
|
||
|
|
alaQoSServiceRowStatus,
|
||
|
|
alaQoSServiceSourceIpPortEnd,
|
||
|
|
alaQoSServiceDestinationIpPortEnd,
|
||
|
|
alaQoSServiceSourceTcpPort,
|
||
|
|
alaQoSServiceSourceTcpPortStatus,
|
||
|
|
alaQoSServiceSourceTcpPortEnd,
|
||
|
|
alaQoSServiceDestinationTcpPort,
|
||
|
|
alaQoSServiceDestinationTcpPortStatus,
|
||
|
|
alaQoSServiceDestinationTcpPortEnd,
|
||
|
|
alaQoSServiceSourceUdpPort,
|
||
|
|
alaQoSServiceSourceUdpPortStatus,
|
||
|
|
alaQoSServiceSourceUdpPortEnd,
|
||
|
|
alaQoSServiceDestinationUdpPort,
|
||
|
|
alaQoSServiceDestinationUdpPortStatus,
|
||
|
|
alaQoSServiceDestinationUdpPortEnd
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Collections of objects providing information for Services"
|
||
|
|
::= { alaQoSMIBGroups 5 }
|
||
|
|
|
||
|
|
alaQoSMIBAppliedServiceObjects OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
alaQoSAppliedServiceSource,
|
||
|
|
alaQoSAppliedServiceProtocol,
|
||
|
|
alaQoSAppliedServiceSourceIpPort,
|
||
|
|
alaQoSAppliedServiceSourceIpPortStatus,
|
||
|
|
alaQoSAppliedServiceDestinationIpPort,
|
||
|
|
alaQoSAppliedServiceDestinationIpPortStatus,
|
||
|
|
alaQoSAppliedServiceRowStatus,
|
||
|
|
alaQoSAppliedServiceSourceIpPortEnd,
|
||
|
|
alaQoSAppliedServiceDestinationIpPortEnd,
|
||
|
|
alaQoSAppliedServiceSourceTcpPort,
|
||
|
|
alaQoSAppliedServiceSourceTcpPortStatus,
|
||
|
|
alaQoSAppliedServiceSourceTcpPortEnd,
|
||
|
|
alaQoSAppliedServiceDestinationTcpPort,
|
||
|
|
alaQoSAppliedServiceDestinationTcpPortStatus,
|
||
|
|
alaQoSAppliedServiceDestinationTcpPortEnd,
|
||
|
|
alaQoSAppliedServiceSourceUdpPort,
|
||
|
|
alaQoSAppliedServiceSourceUdpPortStatus,
|
||
|
|
alaQoSAppliedServiceSourceUdpPortEnd,
|
||
|
|
alaQoSAppliedServiceDestinationUdpPort,
|
||
|
|
alaQoSAppliedServiceDestinationUdpPortStatus,
|
||
|
|
alaQoSAppliedServiceDestinationUdpPortEnd
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Collections of objects providing information
|
||
|
|
for applied Services"
|
||
|
|
::= { alaQoSMIBGroups 6 }
|
||
|
|
|
||
|
|
alaQoSMIBServiceGroupsObjects OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
alaQoSServiceGroupsSource,
|
||
|
|
alaQoSServiceGroupsStatus
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Collections of objects providing information for ServiceGroupss"
|
||
|
|
::= { alaQoSMIBGroups 7 }
|
||
|
|
|
||
|
|
alaQoSMIBAppliedServiceGroupsObjects OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
alaQoSAppliedServiceGroupsSource,
|
||
|
|
alaQoSAppliedServiceGroupsStatus
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Collections of objects providing information
|
||
|
|
for applied ServiceGroupss"
|
||
|
|
::= { alaQoSMIBGroups 8 }
|
||
|
|
|
||
|
|
alaQoSMIBServiceGroupObjects OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
alaQoSServiceGroupStatus
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Collections of objects providing information for ServiceGroups"
|
||
|
|
::= { alaQoSMIBGroups 9 }
|
||
|
|
|
||
|
|
alaQoSMIBAppliedServiceGroupObjects OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
alaQoSAppliedServiceGroupStatus
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Collections of objects providing information
|
||
|
|
for applied ServiceGroups"
|
||
|
|
::= { alaQoSMIBGroups 10 }
|
||
|
|
|
||
|
|
alaQoSMIBNetworkGroupsObjects OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
alaQoSNetworkGroupsSource,
|
||
|
|
alaQoSNetworkGroupsStatus
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Collections of objects providing information for NetworkGroupss"
|
||
|
|
::= { alaQoSMIBGroups 11 }
|
||
|
|
|
||
|
|
alaQoSMIBAppliedNetworkGroupsObjects OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
alaQoSAppliedNetworkGroupsSource,
|
||
|
|
alaQoSAppliedNetworkGroupsStatus
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Collections of objects providing information
|
||
|
|
for applied NetworkGroupss"
|
||
|
|
::= { alaQoSMIBGroups 12 }
|
||
|
|
|
||
|
|
alaQoSMIBNetworkGroupObjects OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
alaQoSNetworkGroupStatus
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Collections of objects providing information for NetworkGroups"
|
||
|
|
::= { alaQoSMIBGroups 13 }
|
||
|
|
|
||
|
|
alaQoSMIBAppliedNetworkGroupObjects OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
alaQoSAppliedNetworkGroupStatus
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Collections of objects providing information
|
||
|
|
for applied NetworkGroups"
|
||
|
|
::= { alaQoSMIBGroups 14 }
|
||
|
|
|
||
|
|
alaQoSMIBMACGroupsObjects OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
alaQoSMACGroupsSource,
|
||
|
|
alaQoSMACGroupsStatus
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Collections of objects providing information for MACGroupss"
|
||
|
|
::= { alaQoSMIBGroups 15 }
|
||
|
|
|
||
|
|
alaQoSMIBAppliedMACGroupsObjects OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
alaQoSAppliedMACGroupsSource,
|
||
|
|
alaQoSAppliedMACGroupsStatus
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Collections of objects providing information
|
||
|
|
for applied MACGroupss"
|
||
|
|
::= { alaQoSMIBGroups 16 }
|
||
|
|
|
||
|
|
alaQoSMIBMACGroupObjects OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
alaQoSMACGroupStatus
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Collections of objects providing information for MACGroups"
|
||
|
|
::= { alaQoSMIBGroups 17 }
|
||
|
|
|
||
|
|
alaQoSMIBAppliedMACGroupObjects OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
alaQoSAppliedMACGroupStatus
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Collections of objects providing information
|
||
|
|
for applied MACGroups"
|
||
|
|
::= { alaQoSMIBGroups 18 }
|
||
|
|
|
||
|
|
alaQoSMIBPortGroupsObjects OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
alaQoSPortGroupsSource,
|
||
|
|
alaQoSPortGroupsStatus
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Collections of objects providing information for PortGroupss"
|
||
|
|
::= { alaQoSMIBGroups 19 }
|
||
|
|
|
||
|
|
alaQoSMIBAppliedPortGroupsObjects OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
alaQoSAppliedPortGroupsSource,
|
||
|
|
alaQoSAppliedPortGroupsStatus
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Collections of objects providing information
|
||
|
|
for applied PortGroupss"
|
||
|
|
::= { alaQoSMIBGroups 20 }
|
||
|
|
|
||
|
|
alaQoSMIBPortGroupObjects OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
alaQoSPortGroupStatus
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Collections of objects providing information for PortGroups"
|
||
|
|
::= { alaQoSMIBGroups 21 }
|
||
|
|
|
||
|
|
alaQoSMIBAppliedPortGroupObjects OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
alaQoSAppliedPortGroupStatus
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Collections of objects providing information
|
||
|
|
for applied PortGroups"
|
||
|
|
::= { alaQoSMIBGroups 22 }
|
||
|
|
|
||
|
|
alaQoSMIBMapGroupsObjects OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
alaQoSMapGroupsSource,
|
||
|
|
alaQoSMapGroupsStatus
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Collections of objects providing information for MapGroupss"
|
||
|
|
::= { alaQoSMIBGroups 23 }
|
||
|
|
|
||
|
|
alaQoSMIBAppliedMapGroupsObjects OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
alaQoSAppliedMapGroupsSource,
|
||
|
|
alaQoSAppliedMapGroupsStatus
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Collections of objects providing information
|
||
|
|
for applied MapGroupss"
|
||
|
|
::= { alaQoSMIBGroups 24 }
|
||
|
|
|
||
|
|
alaQoSMIBMapGroupObjects OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
alaQoSMapGroupStatus
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Collections of objects providing information for MapGroups"
|
||
|
|
::= { alaQoSMIBGroups 25 }
|
||
|
|
|
||
|
|
alaQoSMIBAppliedMapGroupObjects OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
alaQoSAppliedMapGroupStatus
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Collections of objects providing information
|
||
|
|
for applied MapGroups"
|
||
|
|
::= { alaQoSMIBGroups 26 }
|
||
|
|
|
||
|
|
alaQoSMIBActionObjects OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
alaQoSActionSource,
|
||
|
|
alaQoSActionDisposition,
|
||
|
|
alaQoSActionDropAlgorithm,
|
||
|
|
alaQoSActionWredMaximumThreshold,
|
||
|
|
alaQoSActionWredMaximumThresholdStatus,
|
||
|
|
alaQoSActionWredMinimumThreshold,
|
||
|
|
alaQoSActionWredMinimumThresholdStatus,
|
||
|
|
alaQoSActionWredMaximumProbability,
|
||
|
|
alaQoSActionWredMaximumProbabilityStatus,
|
||
|
|
alaQoSActionMinimumBandwidth,
|
||
|
|
alaQoSActionMinimumBandwidthStatus,
|
||
|
|
alaQoSActionMaximumBandwidth,
|
||
|
|
alaQoSActionMaximumBandwidthStatus,
|
||
|
|
alaQoSActionPeakBandwidth,
|
||
|
|
alaQoSActionPeakBandwidthStatus,
|
||
|
|
alaQoSActionPriority,
|
||
|
|
alaQoSActionPriorityStatus,
|
||
|
|
alaQoSActionShared,
|
||
|
|
alaQoSActionJitter,
|
||
|
|
alaQoSActionJitterStatus,
|
||
|
|
alaQoSActionLatency,
|
||
|
|
alaQoSActionLatencyStatus,
|
||
|
|
alaQoSActionMaximumDepth,
|
||
|
|
alaQoSActionMaximumDepthStatus,
|
||
|
|
alaQoSActionMaximumBuffers,
|
||
|
|
alaQoSActionMaximumBuffersStatus,
|
||
|
|
alaQoSAction8021p,
|
||
|
|
alaQoSAction8021pStatus,
|
||
|
|
alaQoSActionTos,
|
||
|
|
alaQoSActionTosStatus,
|
||
|
|
alaQoSActionDscp,
|
||
|
|
alaQoSActionDscpStatus,
|
||
|
|
alaQoSActionMapFrom,
|
||
|
|
alaQoSActionMapTo,
|
||
|
|
alaQoSActionMapGroup,
|
||
|
|
alaQoSActionMapGroupStatus,
|
||
|
|
alaQoSActionSourceRewriteIpAddr,
|
||
|
|
alaQoSActionSourceRewriteIpAddrStatus,
|
||
|
|
alaQoSActionSourceRewriteIpMask,
|
||
|
|
alaQoSActionSourceRewriteNetworkGroup,
|
||
|
|
alaQoSActionSourceRewriteNetworkGroupStatus,
|
||
|
|
alaQoSActionDestinationRewriteIpAddr,
|
||
|
|
alaQoSActionDestinationRewriteIpAddrStatus,
|
||
|
|
alaQoSActionDestinationRewriteIpMask,
|
||
|
|
alaQoSActionDestinationRewriteNetworkGroup,
|
||
|
|
alaQoSActionDestinationRewriteNetworkGroupStatus,
|
||
|
|
alaQoSActionLoadBalanceGroup,
|
||
|
|
alaQoSActionLoadBalanceGroupStatus,
|
||
|
|
alaQoSActionPermanentGatewayIpAddr,
|
||
|
|
alaQoSActionPermanentGatewayIpAddrStatus,
|
||
|
|
alaQoSActionAlternateGatewayIpAddr,
|
||
|
|
alaQoSActionAlternateGatewayIpAddrStatus,
|
||
|
|
alaQoSActionRowStatus,
|
||
|
|
alaQoSActionMinimumDepth,
|
||
|
|
alaQoSActionMinimumDepthStatus,
|
||
|
|
alaQoSActionVPNAccess,
|
||
|
|
alaQoSActionNocache,
|
||
|
|
alaQoSActionPortdisable,
|
||
|
|
alaQoSActionRedirectSlot,
|
||
|
|
alaQoSActionRedirectSlotStatus,
|
||
|
|
alaQoSActionRedirectPort,
|
||
|
|
alaQoSActionRedirectAgg,
|
||
|
|
alaQoSActionRedirectAggStatus,
|
||
|
|
alaQoSActionMirrorSlot,
|
||
|
|
alaQoSActionMirrorPort,
|
||
|
|
alaQoSActionMirrorMode,
|
||
|
|
alaQoSActionMirrorModeStatus,
|
||
|
|
alaQoSActionCIR,
|
||
|
|
alaQoSActionCIRStatus,
|
||
|
|
alaQoSActionCBS,
|
||
|
|
alaQoSActionCBSStatus,
|
||
|
|
alaQoSActionPIR,
|
||
|
|
alaQoSActionPIRStatus,
|
||
|
|
alaQoSActionPBS,
|
||
|
|
alaQoSActionPBSStatus,
|
||
|
|
alaQoSActionCounterColor
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Collections of objects providing information for Actions"
|
||
|
|
::= { alaQoSMIBGroups 27 }
|
||
|
|
|
||
|
|
alaQoSMIBAppliedActionObjects OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
alaQoSAppliedActionSource,
|
||
|
|
alaQoSAppliedActionDisposition,
|
||
|
|
alaQoSAppliedActionDropAlgorithm,
|
||
|
|
alaQoSAppliedActionWredMaximumThreshold,
|
||
|
|
alaQoSAppliedActionWredMaximumThresholdStatus,
|
||
|
|
alaQoSAppliedActionWredMinimumThreshold,
|
||
|
|
alaQoSAppliedActionWredMinimumThresholdStatus,
|
||
|
|
alaQoSAppliedActionWredMaximumProbability,
|
||
|
|
alaQoSAppliedActionWredMaximumProbabilityStatus,
|
||
|
|
alaQoSAppliedActionMinimumBandwidth,
|
||
|
|
alaQoSAppliedActionMinimumBandwidthStatus,
|
||
|
|
alaQoSAppliedActionMaximumBandwidth,
|
||
|
|
alaQoSAppliedActionMaximumBandwidthStatus,
|
||
|
|
alaQoSAppliedActionPeakBandwidth,
|
||
|
|
alaQoSAppliedActionPeakBandwidthStatus,
|
||
|
|
alaQoSAppliedActionPriority,
|
||
|
|
alaQoSAppliedActionPriorityStatus,
|
||
|
|
alaQoSAppliedActionShared,
|
||
|
|
alaQoSAppliedActionJitter,
|
||
|
|
alaQoSAppliedActionJitterStatus,
|
||
|
|
alaQoSAppliedActionLatency,
|
||
|
|
alaQoSAppliedActionLatencyStatus,
|
||
|
|
alaQoSAppliedActionMaximumDepth,
|
||
|
|
alaQoSAppliedActionMaximumDepthStatus,
|
||
|
|
alaQoSAppliedActionMaximumBuffers,
|
||
|
|
alaQoSAppliedActionMaximumBuffersStatus,
|
||
|
|
alaQoSAppliedAction8021p,
|
||
|
|
alaQoSAppliedAction8021pStatus,
|
||
|
|
alaQoSAppliedActionTos,
|
||
|
|
alaQoSAppliedActionTosStatus,
|
||
|
|
alaQoSAppliedActionDscp,
|
||
|
|
alaQoSAppliedActionDscpStatus,
|
||
|
|
alaQoSAppliedActionMapFrom,
|
||
|
|
alaQoSAppliedActionMapTo,
|
||
|
|
alaQoSAppliedActionMapGroup,
|
||
|
|
alaQoSAppliedActionMapGroupStatus,
|
||
|
|
alaQoSAppliedActionSourceRewriteIpAddr,
|
||
|
|
alaQoSAppliedActionSourceRewriteIpAddrStatus,
|
||
|
|
alaQoSAppliedActionSourceRewriteIpMask,
|
||
|
|
alaQoSAppliedActionSourceRewriteNetworkGroup,
|
||
|
|
alaQoSAppliedActionSourceRewriteNetworkGroupStatus,
|
||
|
|
alaQoSAppliedActionDestinationRewriteIpAddr,
|
||
|
|
alaQoSAppliedActionDestinationRewriteIpAddrStatus,
|
||
|
|
alaQoSAppliedActionDestinationRewriteIpMask,
|
||
|
|
alaQoSAppliedActionDestinationRewriteNetworkGroup,
|
||
|
|
alaQoSAppliedActionDestinationRewriteNetworkGroupStatus,
|
||
|
|
alaQoSAppliedActionLoadBalanceGroup,
|
||
|
|
alaQoSAppliedActionLoadBalanceGroupStatus,
|
||
|
|
alaQoSAppliedActionPermanentGatewayIpAddr,
|
||
|
|
alaQoSAppliedActionPermanentGatewayIpAddrStatus,
|
||
|
|
alaQoSAppliedActionAlternateGatewayIpAddr,
|
||
|
|
alaQoSAppliedActionAlternateGatewayIpAddrStatus,
|
||
|
|
alaQoSAppliedActionRowStatus,
|
||
|
|
alaQoSAppliedActionMinimumDepth,
|
||
|
|
alaQoSAppliedActionMinimumDepthStatus,
|
||
|
|
alaQoSAppliedActionVPNAccess,
|
||
|
|
alaQoSAppliedActionNocache,
|
||
|
|
alaQoSAppliedActionPortdisable,
|
||
|
|
alaQoSAppliedActionRedirectSlot,
|
||
|
|
alaQoSAppliedActionRedirectSlotStatus,
|
||
|
|
alaQoSAppliedActionRedirectPort,
|
||
|
|
alaQoSAppliedActionRedirectAgg,
|
||
|
|
alaQoSAppliedActionRedirectAggStatus,
|
||
|
|
alaQoSAppliedActionMirrorSlot,
|
||
|
|
alaQoSAppliedActionMirrorPort,
|
||
|
|
alaQoSAppliedActionMirrorMode,
|
||
|
|
alaQoSAppliedActionMirrorModeStatus,
|
||
|
|
alaQoSAppliedActionCIR,
|
||
|
|
alaQoSAppliedActionCIRStatus,
|
||
|
|
alaQoSAppliedActionCBS,
|
||
|
|
alaQoSAppliedActionCBSStatus,
|
||
|
|
alaQoSAppliedActionPIR,
|
||
|
|
alaQoSAppliedActionPIRStatus,
|
||
|
|
alaQoSAppliedActionPBS,
|
||
|
|
alaQoSAppliedActionPBSStatus,
|
||
|
|
alaQoSAppliedActionCounterColor
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Collections of objects providing information
|
||
|
|
for applied Actions"
|
||
|
|
::= { alaQoSMIBGroups 28 }
|
||
|
|
|
||
|
|
alaQoSMIBPortObjects OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
alaQoSPortEnabled,
|
||
|
|
alaQoSPortAppliedEnabled,
|
||
|
|
alaQoSPortInterfaceType,
|
||
|
|
alaQoSPortTrusted,
|
||
|
|
alaQoSPortDefault8021p,
|
||
|
|
alaQoSPortDefaultDSCP,
|
||
|
|
alaQoSPortMaximumReservedBandwidth,
|
||
|
|
alaQoSPortMaximumReservedBandwidthStatus,
|
||
|
|
alaQoSPortAppliedMaximumReservedBandwidth,
|
||
|
|
alaQoSPortAppliedMaximumReservedBandwidthStatus,
|
||
|
|
alaQoSPortMaximumSignalledBandwidth,
|
||
|
|
alaQoSPortMaximumSignalledBandwidthStatus,
|
||
|
|
alaQoSPortAppliedMaximumSignalledBandwidth,
|
||
|
|
alaQoSPortAppliedMaximumSignalledBandwidthStatus,
|
||
|
|
alaQoSPortDefaultQueues,
|
||
|
|
alaQoSPortAppliedDefaultQueues,
|
||
|
|
alaQoSPortMaximumDefaultBandwidth,
|
||
|
|
alaQoSPortMaximumDefaultBandwidthStatus,
|
||
|
|
alaQoSPortAppliedMaximumDefaultBandwidth,
|
||
|
|
alaQoSPortAppliedMaximumDefaultBandwidthStatus,
|
||
|
|
alaQoSPortMaximumDefaultDepth,
|
||
|
|
alaQoSPortMaximumDefaultDepthStatus,
|
||
|
|
alaQoSPortAppliedMaximumDefaultDepth,
|
||
|
|
alaQoSPortAppliedMaximumDefaultDepthStatus,
|
||
|
|
alaQoSPortMaximumDefaultBuffers,
|
||
|
|
alaQoSPortMaximumDefaultBuffersStatus,
|
||
|
|
alaQoSPortAppliedMaximumDefaultBuffers,
|
||
|
|
alaQoSPortAppliedMaximumDefaultBuffersStatus,
|
||
|
|
alaQoSPortReset,
|
||
|
|
alaQoSPortPhysicalBandwidth,
|
||
|
|
alaQoSPortReservedBandwidth,
|
||
|
|
alaQoSPortSignalledBandwidth,
|
||
|
|
alaQoSPortCurrentBandwidth,
|
||
|
|
alaQoSPortDefaultQidLow,
|
||
|
|
alaQoSPortDefaultQidMedium,
|
||
|
|
alaQoSPortDefaultQidHigh,
|
||
|
|
alaQoSPortDefaultQidUrgent,
|
||
|
|
alaQoSPortFloodQid,
|
||
|
|
alaQoSPortQueues,
|
||
|
|
alaQoSPortQueuesCreated,
|
||
|
|
alaQoSPortQueuesFailed,
|
||
|
|
alaQoSPortQueuesPreempted,
|
||
|
|
alaQoSPortRowStatus,
|
||
|
|
alaQoSPortFirPrio0EnqBytes,
|
||
|
|
alaQoSPortFirPrio0DeqBytes,
|
||
|
|
alaQoSPortFirPrio0EnqPkts,
|
||
|
|
alaQoSPortFirPrio0DeqPkts,
|
||
|
|
alaQoSPortFirPrio0QidDiscardPkts,
|
||
|
|
alaQoSPortFirPrio0WredDiscardPkts,
|
||
|
|
alaQoSPortFirPrio0OverflowDiscardPkts,
|
||
|
|
alaQoSPortFirPrio1EnqBytes,
|
||
|
|
alaQoSPortFirPrio1DeqBytes,
|
||
|
|
alaQoSPortFirPrio1EnqPkts,
|
||
|
|
alaQoSPortFirPrio1DeqPkts,
|
||
|
|
alaQoSPortFirPrio1QidDiscardPkts,
|
||
|
|
alaQoSPortFirPrio1WredDiscardPkts,
|
||
|
|
alaQoSPortFirPrio1OverflowDiscardPkts,
|
||
|
|
alaQoSPortFirPrio2EnqBytes,
|
||
|
|
alaQoSPortFirPrio2DeqBytes,
|
||
|
|
alaQoSPortFirPrio2EnqPkts,
|
||
|
|
alaQoSPortFirPrio2DeqPkts,
|
||
|
|
alaQoSPortFirPrio2QidDiscardPkts,
|
||
|
|
alaQoSPortFirPrio2WredDiscardPkts,
|
||
|
|
alaQoSPortFirPrio2OverflowDiscardPkts,
|
||
|
|
alaQoSPortFirPrio3EnqBytes,
|
||
|
|
alaQoSPortFirPrio3DeqBytes,
|
||
|
|
alaQoSPortFirPrio3EnqPkts,
|
||
|
|
alaQoSPortFirPrio3DeqPkts,
|
||
|
|
alaQoSPortFirPrio3QidDiscardPkts,
|
||
|
|
alaQoSPortFirPrio3WredDiscardPkts,
|
||
|
|
alaQoSPortFirPrio3OverflowDiscardPkts,
|
||
|
|
alaQoSPortDefaultClassification,
|
||
|
|
alaQoSPortLowPriorityWeight,
|
||
|
|
alaQoSPortMediumPriorityWeight,
|
||
|
|
alaQoSPortHighPriorityWeight,
|
||
|
|
alaQoSPortUrgentPriorityWeight,
|
||
|
|
alaQoSPortMaximumBandwidth,
|
||
|
|
alaQoSPortMaximumBandwidthStatus,
|
||
|
|
alaQoSPortEnqueuingThresholdP0Lower,
|
||
|
|
alaQoSPortEnqueuingThresholdP0Upper,
|
||
|
|
alaQoSPortEnqueuingThresholdP1Lower,
|
||
|
|
alaQoSPortEnqueuingThresholdP1Upper,
|
||
|
|
alaQoSPortEnqueuingThresholdP2Lower,
|
||
|
|
alaQoSPortEnqueuingThresholdP2Upper,
|
||
|
|
alaQoSPortEnqueuingThresholdP3Lower,
|
||
|
|
alaQoSPortEnqueuingThresholdP3Upper,
|
||
|
|
alaQoSPortEnqueuingThresholdStatus,
|
||
|
|
alaQoSPortServicingMode,
|
||
|
|
alaQoSPortHighDensity,
|
||
|
|
alaQoSPortFreeFFPRules,
|
||
|
|
alaQoSPortUsedFFPRules,
|
||
|
|
alaQoSPortFreeFFPMasks,
|
||
|
|
alaQoSPortUsedFFPMasks,
|
||
|
|
alaQoSPortSpoofedCount,
|
||
|
|
alaQoSPortNonSpoofedCount,
|
||
|
|
alaQoSPortQ4PriorityWeight,
|
||
|
|
alaQoSPortQ5PriorityWeight,
|
||
|
|
alaQoSPortQ6PriorityWeight,
|
||
|
|
alaQoSPortQ7PriorityWeight,
|
||
|
|
alaQoSPortCOS0MaximumBandwidth,
|
||
|
|
alaQoSPortCOS0MaximumBandwidthStatus,
|
||
|
|
alaQoSPortCOS1MaximumBandwidth,
|
||
|
|
alaQoSPortCOS1MaximumBandwidthStatus,
|
||
|
|
alaQoSPortCOS2MaximumBandwidth,
|
||
|
|
alaQoSPortCOS2MaximumBandwidthStatus,
|
||
|
|
alaQoSPortCOS3MaximumBandwidth,
|
||
|
|
alaQoSPortCOS3MaximumBandwidthStatus,
|
||
|
|
alaQoSPortCOS4MaximumBandwidth,
|
||
|
|
alaQoSPortCOS4MaximumBandwidthStatus,
|
||
|
|
alaQoSPortCOS5MaximumBandwidth,
|
||
|
|
alaQoSPortCOS5MaximumBandwidthStatus,
|
||
|
|
alaQoSPortCOS6MaximumBandwidth,
|
||
|
|
alaQoSPortCOS6MaximumBandwidthStatus,
|
||
|
|
alaQoSPortCOS7MaximumBandwidth,
|
||
|
|
alaQoSPortCOS7MaximumBandwidthStatus,
|
||
|
|
alaQoSPortCOS0MinimumBandwidth,
|
||
|
|
alaQoSPortCOS0MinimumBandwidthStatus,
|
||
|
|
alaQoSPortCOS1MinimumBandwidth,
|
||
|
|
alaQoSPortCOS1MinimumBandwidthStatus,
|
||
|
|
alaQoSPortCOS2MinimumBandwidth,
|
||
|
|
alaQoSPortCOS2MinimumBandwidthStatus,
|
||
|
|
alaQoSPortCOS3MinimumBandwidth,
|
||
|
|
alaQoSPortCOS3MinimumBandwidthStatus,
|
||
|
|
alaQoSPortCOS4MinimumBandwidth,
|
||
|
|
alaQoSPortCOS4MinimumBandwidthStatus,
|
||
|
|
alaQoSPortCOS5MinimumBandwidth,
|
||
|
|
alaQoSPortCOS5MinimumBandwidthStatus,
|
||
|
|
alaQoSPortCOS6MinimumBandwidth,
|
||
|
|
alaQoSPortCOS6MinimumBandwidthStatus,
|
||
|
|
alaQoSPortCOS7MinimumBandwidth,
|
||
|
|
alaQoSPortCOS7MinimumBandwidthStatus,
|
||
|
|
alaQoSPortMaximumIngBandwidth,
|
||
|
|
alaQoSPortMaximumIngBandwidthStatus,
|
||
|
|
alaQoSPortDEIMarking,
|
||
|
|
alaQoSPortMonitor,
|
||
|
|
alaQoSPortDEIMapping
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Collections of objects providing information for Ports"
|
||
|
|
::= { alaQoSMIBGroups 29 }
|
||
|
|
|
||
|
|
alaQoSMIBConfigObjects OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
alaQoSConfigEnabled,
|
||
|
|
alaQoSConfigDefaultQueues,
|
||
|
|
alaQoSConfigAppliedDefaultQueues,
|
||
|
|
alaQoSConfigTrustPorts,
|
||
|
|
alaQoSConfigFlowTimeout,
|
||
|
|
alaQoSConfigAppliedFlowTimeout,
|
||
|
|
alaQoSConfigFragmentTimeout,
|
||
|
|
alaQoSConfigAppliedFragmentTimeout,
|
||
|
|
alaQoSConfigReflexiveTimeout,
|
||
|
|
alaQoSConfigAppliedReflfexiveTimeout,
|
||
|
|
alaQoSConfigNatTimeout,
|
||
|
|
alaQoSConfigAppliedNatTimeout,
|
||
|
|
alaQoSConfigClassifyl3Bridged,
|
||
|
|
alaQoSConfigAppliedClassifyl3Bridged,
|
||
|
|
alaQoSConfigClassifyFragments,
|
||
|
|
alaQoSConfigAppliedClassifyFragments,
|
||
|
|
alaQoSConfigDefaultBridgedDisposition,
|
||
|
|
alaQoSConfigAppliedDefaultBridgedDisposition,
|
||
|
|
alaQoSConfigDefaultRoutedDisposition,
|
||
|
|
alaQoSConfigAppliedDefaultRoutedDisposition,
|
||
|
|
alaQoSConfigDefaultMulticastDisposition,
|
||
|
|
alaQoSConfigAppliedDefaultMulticastDisposition,
|
||
|
|
alaQoSConfigStatsInterval,
|
||
|
|
alaQoSConfigLogLines,
|
||
|
|
alaQoSConfigLogLevel,
|
||
|
|
alaQoSConfigLogConsole,
|
||
|
|
alaQoSConfigForwardLog,
|
||
|
|
alaQoSConfigClearLog,
|
||
|
|
alaQoSConfigApply,
|
||
|
|
alaQoSConfigRevert,
|
||
|
|
alaQoSConfigReset,
|
||
|
|
alaQoSConfigStatsReset,
|
||
|
|
alaQoSConfigFlush,
|
||
|
|
alaQoSConfigDebug,
|
||
|
|
alaQoSConfigServicingMode,
|
||
|
|
alaQoSConfigLowPriorityWeight,
|
||
|
|
alaQoSConfigMediumPriorityWeight,
|
||
|
|
alaQoSConfigHighPriorityWeight,
|
||
|
|
alaQoSConfigUrgentPriorityWeight,
|
||
|
|
alaQoSConfigQ4PriorityWeight,
|
||
|
|
alaQoSConfigQ5PriorityWeight,
|
||
|
|
alaQoSConfigQ6PriorityWeight,
|
||
|
|
alaQoSConfigQ7PriorityWeight,
|
||
|
|
alaQoSConfigUserportFilter,
|
||
|
|
alaQoSConfigAppliedUserportFilter,
|
||
|
|
alaQoSConfigUserportShutdown,
|
||
|
|
alaQoSConfigAppliedUserportShutdown,
|
||
|
|
alaQoSConfigAutoNMS,
|
||
|
|
alaQoSConfigAutoPhones,
|
||
|
|
alaQoSConfigQMPage,
|
||
|
|
alaQoSConfigQMMACGroup,
|
||
|
|
alaQoSConfigQMPath,
|
||
|
|
alaQoSConfigDEIMapping,
|
||
|
|
alaQoSConfigDEIMarking,
|
||
|
|
alaQoSConfigStatsResetEgress
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Collections of objects providing information for Configs"
|
||
|
|
::= { alaQoSMIBGroups 30 }
|
||
|
|
|
||
|
|
alaQoSMIBStatsObjects OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
alaQoSStatsL2Events,
|
||
|
|
alaQoSStatsL2Matches,
|
||
|
|
alaQoSStatsL2Drops,
|
||
|
|
alaQoSStatsL3IngressEvents,
|
||
|
|
alaQoSStatsL3IngressMatches,
|
||
|
|
alaQoSStatsL3IngressDrops,
|
||
|
|
alaQoSStatsL3EgressEvents,
|
||
|
|
alaQoSStatsL3EgressMatches,
|
||
|
|
alaQoSStatsL3EgressDrops,
|
||
|
|
alaQoSStatsMulticastEvents,
|
||
|
|
alaQoSStatsMulticastMatches,
|
||
|
|
alaQoSStatsMulticastDrops,
|
||
|
|
alaQoSStatsFragments,
|
||
|
|
alaQoSStatsBadFragments,
|
||
|
|
alaQoSStatsUnknownFragments,
|
||
|
|
alaQoSStatsReflexiveFlows,
|
||
|
|
alaQoSStatsReflexiveCorrections,
|
||
|
|
alaQoSStatsLoadBalanceFlows,
|
||
|
|
alaQoSStatsClassifierMaxNodes,
|
||
|
|
alaQoSStatsClassifierMaxDepth,
|
||
|
|
alaQoSStatsFlowLookups,
|
||
|
|
alaQoSStatsFlowHits,
|
||
|
|
alaQoSStatsSentNIMessages,
|
||
|
|
alaQoSStatsReceivedNIMessages,
|
||
|
|
alaQoSStatsFailedNIMessages,
|
||
|
|
alaQoSStatsSpoofedEvents,
|
||
|
|
alaQoSStatsNonSpoofedEvents,
|
||
|
|
alaQoSStatsDropServicesEvents
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Collections of objects providing information for Statss"
|
||
|
|
::= { alaQoSMIBGroups 31 }
|
||
|
|
|
||
|
|
alaQoSMIBQueueObjects OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
alaQoSQueueSlot,
|
||
|
|
alaQoSQueuePort,
|
||
|
|
alaQoSQueuePortId,
|
||
|
|
alaQoSQueueType,
|
||
|
|
alaQoSQueuePriority,
|
||
|
|
alaQoSQueueMinimumBandwidth,
|
||
|
|
alaQoSQueueMaximumBandwidth,
|
||
|
|
alaQoSQueueAverageBandwidth,
|
||
|
|
alaQoSQueueMinimumDepth,
|
||
|
|
alaQoSQueueMaximumDepth,
|
||
|
|
alaQoSQueueMaximumBuffers,
|
||
|
|
alaQoSQueue8021p,
|
||
|
|
alaQoSQueuePacketsSent,
|
||
|
|
alaQoSQueuePacketsDropped,
|
||
|
|
alaQoSQueueMaxLength,
|
||
|
|
alaQoSQueueAverageLength,
|
||
|
|
alaQoSQueueCurrentLength,
|
||
|
|
alaQoSQueueAction
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Collections of objects providing information for Queues"
|
||
|
|
::= { alaQoSMIBGroups 32 }
|
||
|
|
|
||
|
|
alaQoSMIBSlotObjects OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
alaQoSSlotType,
|
||
|
|
alaQoSSlotMaxBuffers,
|
||
|
|
alaQoSSlotFreeBuffers1,
|
||
|
|
alaQoSSlotFreeBuffers2,
|
||
|
|
alaQoSSlotThreshold1Low,
|
||
|
|
alaQoSSlotThreshold1Medium,
|
||
|
|
alaQoSSlotThreshold1High,
|
||
|
|
alaQoSSlotThreshold1Urgent,
|
||
|
|
alaQoSSlotThreshold2Low,
|
||
|
|
alaQoSSlotThreshold2Medium,
|
||
|
|
alaQoSSlotThreshold2High,
|
||
|
|
alaQoSSlotThreshold2Urgent,
|
||
|
|
alaQoSSlotBuffersDenied,
|
||
|
|
alaQoSSlotBuffersDeniedAverage,
|
||
|
|
alaQoSSlotBuffersDropped,
|
||
|
|
alaQoSSlotBuffersDroppedAverage,
|
||
|
|
alaQoSSlotWredThresholdP0Lower,
|
||
|
|
alaQoSSlotWredThresholdP0Upper,
|
||
|
|
alaQoSSlotWredThresholdP1Lower,
|
||
|
|
alaQoSSlotWredThresholdP1Upper,
|
||
|
|
alaQoSSlotWredThresholdP2Lower,
|
||
|
|
alaQoSSlotWredThresholdP2Upper,
|
||
|
|
alaQoSSlotWredThresholdP3Lower,
|
||
|
|
alaQoSSlotWredThresholdP3Upper,
|
||
|
|
alaQoSSlotWredAverageCounterWeight,
|
||
|
|
alaQoSSlotWredThresholdStatus,
|
||
|
|
alaQoSSlotCbqThresholdMode,
|
||
|
|
alaQoSSlotCbqThresholdP1,
|
||
|
|
alaQoSSlotCbqThresholdP2,
|
||
|
|
alaQoSSlotCbqThresholdP3,
|
||
|
|
alaQoSSlotHighDensity
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Collections of objects providing information for Slots"
|
||
|
|
::= { alaQoSMIBGroups 33 }
|
||
|
|
|
||
|
|
alaQoSMIBClassifyObjects OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
alaQoSClassifyExecute,
|
||
|
|
alaQoSClassifyL2SourceResultRule,
|
||
|
|
alaQoSClassifyL2SourceResultDisposition,
|
||
|
|
alaQoSClassifyL2DestinationResultRule,
|
||
|
|
alaQoSClassifyL2DestinationResultDisposition,
|
||
|
|
alaQoSClassifyL3ResultRule,
|
||
|
|
alaQoSClassifyL3ResultDisposition,
|
||
|
|
alaQoSClassifyIGMPResultRule,
|
||
|
|
alaQoSClassifyIGMPResultDisposition,
|
||
|
|
alaQoSClassifyMulticastResultRule,
|
||
|
|
alaQoSClassifyMulticastResultDisposition
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Collections of objects providing information for Classifys"
|
||
|
|
::= { alaQoSMIBGroups 34 }
|
||
|
|
|
||
|
|
alaQoSMIBRuleGroupsObjects OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
alaQoSRuleGroupsSource,
|
||
|
|
alaQoSRuleGroupsType,
|
||
|
|
alaQoSRuleGroupsEnabled,
|
||
|
|
alaQoSRuleGroupsStatus
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Collections of objects providing information for RuleGroupss"
|
||
|
|
::= { alaQoSMIBGroups 35 }
|
||
|
|
|
||
|
|
alaQoSMIBAppliedRuleGroupsObjects OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
alaQoSAppliedRuleGroupsSource,
|
||
|
|
alaQoSAppliedRuleGroupsType,
|
||
|
|
alaQoSAppliedRuleGroupsEnabled,
|
||
|
|
alaQoSAppliedRuleGroupsStatus
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Collections of objects providing information
|
||
|
|
for applied RuleGroupss"
|
||
|
|
::= { alaQoSMIBGroups 36 }
|
||
|
|
|
||
|
|
alaQoSMIBRuleGroupObjects OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
alaQoSRuleGroupMatches,
|
||
|
|
alaQoSRuleGroupCountType,
|
||
|
|
alaQoSRuleGroupPacketCount,
|
||
|
|
alaQoSRuleGroupByteCount,
|
||
|
|
alaQoSRuleGroupStatus
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Collections of objects providing information for RuleGroups"
|
||
|
|
::= { alaQoSMIBGroups 37 }
|
||
|
|
|
||
|
|
alaQoSMIBAppliedRuleGroupObjects OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
alaQoSAppliedRuleGroupMatches,
|
||
|
|
alaQoSAppliedRuleGroupCountType,
|
||
|
|
alaQoSAppliedRuleGroupPacketCount,
|
||
|
|
alaQoSAppliedRuleGroupByteCount,
|
||
|
|
alaQoSAppliedRuleGroupStatus
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Collections of objects providing information
|
||
|
|
for applied RuleGroups"
|
||
|
|
::= { alaQoSMIBGroups 38 }
|
||
|
|
|
||
|
|
alaQoSVlanGroupsObjects OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
alaQoSVlanGroupsSource,
|
||
|
|
alaQoSVlanGroupsStatus
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Collections of objects providing QoS Vlan Groups definitions."
|
||
|
|
::= { alaQoSMIBGroups 39 }
|
||
|
|
|
||
|
|
alaQoSAppliedVlanGroupsObjects OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
alaQoSAppliedVlanGroupsSource,
|
||
|
|
alaQoSAppliedVlanGroupsStatus
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Collections of objects providing applied QoS Vlan Groups
|
||
|
|
definitions."
|
||
|
|
::= { alaQoSMIBGroups 40 }
|
||
|
|
|
||
|
|
alaQoSVlanGroupObjects OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
alaQoSVlanGroupStatus
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Collections of objects providing QoS Vlan Groups definitions."
|
||
|
|
::= { alaQoSMIBGroups 41 }
|
||
|
|
|
||
|
|
alaQoSAppliedVlanGroupObjects OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
alaQoSAppliedVlanGroupStatus
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Collections of objects providing applied QoS Vlan Groups
|
||
|
|
definitions."
|
||
|
|
::= { alaQoSMIBGroups 42 }
|
||
|
|
|
||
|
|
alaQoSMIBHwLoopBackProfileObjects OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
alaQoSHwLoopbackSourceMac,
|
||
|
|
alaQoSHwLoopbackDestinationMac,
|
||
|
|
alaQoSHwLoopbackVlan,
|
||
|
|
alaQoSHwLoopbackPort,
|
||
|
|
alaQoSHwLoopbackType,
|
||
|
|
alaQoSHwLoopbackProfileStatus,
|
||
|
|
alaQoSHwLoopbackProfileRowStatus
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Collections of objects providing information
|
||
|
|
for Hardware Loopback"
|
||
|
|
::= { alaQoSMIBGroups 43 }
|
||
|
|
|
||
|
|
alaQoSMIBCompliance MODULE-COMPLIANCE
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Compliance statement for QoS."
|
||
|
|
MODULE
|
||
|
|
MANDATORY-GROUPS {
|
||
|
|
alaQoSMIBRuleObjects,
|
||
|
|
alaQoSMIBAppliedRuleObjects,
|
||
|
|
alaQoSMIBConditionObjects,
|
||
|
|
alaQoSMIBAppliedConditionObjects,
|
||
|
|
alaQoSMIBServiceObjects,
|
||
|
|
alaQoSMIBAppliedServiceObjects,
|
||
|
|
alaQoSMIBServiceGroupsObjects,
|
||
|
|
alaQoSMIBAppliedServiceGroupsObjects,
|
||
|
|
alaQoSMIBServiceGroupObjects,
|
||
|
|
alaQoSMIBAppliedServiceGroupObjects,
|
||
|
|
alaQoSMIBNetworkGroupsObjects,
|
||
|
|
alaQoSMIBAppliedNetworkGroupsObjects,
|
||
|
|
alaQoSMIBNetworkGroupObjects,
|
||
|
|
alaQoSMIBAppliedNetworkGroupObjects,
|
||
|
|
alaQoSMIBMACGroupsObjects,
|
||
|
|
alaQoSMIBAppliedMACGroupsObjects,
|
||
|
|
alaQoSMIBMACGroupObjects,
|
||
|
|
alaQoSMIBAppliedMACGroupObjects,
|
||
|
|
alaQoSMIBPortGroupsObjects,
|
||
|
|
alaQoSMIBAppliedPortGroupsObjects,
|
||
|
|
alaQoSMIBPortGroupObjects,
|
||
|
|
alaQoSMIBAppliedPortGroupObjects,
|
||
|
|
alaQoSMIBMapGroupsObjects,
|
||
|
|
alaQoSMIBAppliedMapGroupsObjects,
|
||
|
|
alaQoSMIBMapGroupObjects,
|
||
|
|
alaQoSMIBAppliedMapGroupObjects,
|
||
|
|
alaQoSMIBActionObjects,
|
||
|
|
alaQoSMIBAppliedActionObjects,
|
||
|
|
alaQoSMIBPortObjects,
|
||
|
|
alaQoSMIBConfigObjects,
|
||
|
|
alaQoSMIBStatsObjects,
|
||
|
|
alaQoSMIBQueueObjects,
|
||
|
|
alaQoSMIBSlotObjects,
|
||
|
|
alaQoSMIBClassifyObjects,
|
||
|
|
alaQoSMIBRuleGroupsObjects,
|
||
|
|
alaQoSMIBAppliedRuleGroupsObjects,
|
||
|
|
alaQoSMIBRuleGroupObjects,
|
||
|
|
alaQoSMIBAppliedRuleGroupObjects,
|
||
|
|
alaQoSVlanGroupsObjects,
|
||
|
|
alaQoSAppliedVlanGroupsObjects,
|
||
|
|
alaQoSVlanGroupObjects,
|
||
|
|
alaQoSAppliedVlanGroupObjects,
|
||
|
|
alaQoSMIBHwLoopBackProfileObjects
|
||
|
|
}
|
||
|
|
::= { alaQoSMIBCompliances 1 }
|
||
|
|
|
||
|
|
END
|