david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
main
mibs/MIBS/nokia/ITF-MIB-EXT

1704 lines
66 KiB
Plaintext
Raw Permalink Normal View History

Initial commit
2023-12-05 12:25:34 +01:00
ITF-MIB-EXT DEFINITIONS ::= BEGIN
-- ===========================================================================
-- This specification is published by Alcatel under Non-Disclosure
-- Agreement(s) (NDA) with specific parties and has to be considered as
-- Confidential Information as defined in such NDA.
-- Alcatel reserves the right to revise this document for any reason,
-- including but not limited to conformity with standards promulgated by
-- various agencies, utilisation of advances in the state of the technical
-- areas, or the reflection of changes in the design of any equipment,
-- techniques, or procedures described or referred to herein.
-- The product specifications and other technical or performance information
-- contained herein are subject to change without notice.
-- Updates of this document will be issued under the above NDA's.
-- Alcatel makes no representation or warranty, expressed or implied, with
-- respect to the sufficiency, accuracy, or utility of any information or
-- opinion contained herein. Alcatel expressly advises that any use of for
-- any purpose or reliance upon this technical reference is at the risk of
-- the user and that Alcatel shall not be liable for any damage or injury
-- incurred by any person arising out of the sufficiency, accuracy, or
-- utility of any information or opinion contained herein.
-- This document is not to be construed as a suggestion to any manufacturer
-- to modify or change any of its products, nor does this document represent
-- any commitment by Alcatel to sell or purchase any product.
-- Nothing contained herein shall be construed as conferring by implication,
-- estoppel, or otherwise any license or right under any patent, whether or
-- not the use of any information herein necessarily employs an invention of
-- any existing or later issued patent.
-- Alcatel reserves the right not to offer any or all of these products and
-- to withdraw any or all of them at any future time.
-- Copyright (C) 2004, Alcatel. All Rights Reserved.
-- ===========================================================================
-- MODULE IDENTITY
-- LAST-UPDATED "201609160000Z"
-- ORGANIZATION "Alcatel-Lucent"
-- CONTACT-INFO "email:asam.mibsupport@alcatel-lucent.com"
-- DESCRIPTION
-- "Alcatel proprietary extensions to the Interface MIB."
--
-- REVISION "201709210000Z"
-- DESCRIPTION
-- Editor: Marita Saveyn
-- Reason for change: RCR ALU02361918 - BT - timer on the relay of the RFLT-E
-- Change:
-- asamLluRelayActionTimer: must have range 0..864000
--
--
-- REVISION "201709130000Z"
-- DESCRIPTION
-- Editor: Marita Saveyn
-- Reason for change: RCR ALU02361918 - BT - timer on the relay of the RFLT-E
-- Change:
-- 1. asamLluRelayActionTime: must have range 0..864000, and default 50
--
-- REVISION "201708180000Z"
-- DESCRIPTION
-- Editor: Alfredo Alvarez
-- Reason for change: RCR ALU02361918 - BT - timer on the relay of the RFLT-E
-- Change:
-- 1. Added asamLluRelayActionTimer
--
-- REVISION "201707200000Z"
-- DESCRIPTION
-- Editor: Alfredo Alvarez
-- Reason for change: RCR ALU02361918 - BT - timer on the relay of the RFLT-E
-- Change:
-- 1. Added 'disconnectTimed' to the list of possible relay status
-- 2. Added asamLluRelayOperStatus and asamLluRelayActionTime
--
-- REVISION "201609160000Z"
-- DESCRIPTION
-- Version: 3EC36485EDAA_V5.6.0.0.0
-- Editor : Ravichandran P
-- Reason for Change: RCR ALU02254841- NNI support on NDLT-G
-- Change : Added New Table asamIfPortTypeTable.
--
-- REVISION "201510150000Z"
-- DESCRIPTION
-- "Version: 3EC36485EDAA_V5.3.0.0.0
-- Editor: Rommy Volders
-- Reason for change: ALU02136586
-- Change: Add extra value for asamLluRelayStatus.
--
-- REVISION "201410080000Z"
-- DESCRIPTION
-- Editor: Siva Sankar
-- Reason for change: Updated based on review comments for REVISION "201410030000Z"
-- Change: 1. Changed the order of new tables asamIfIndexToExtIfIndexMappingTable
-- and asamExtIfIndexToIfIndexMappingTable.
-- 2. Gauge type is used instead of INTEGER for ExtIfIndex identifiers.
--
-- REVISION "201410030000Z"
-- DESCRIPTION
-- Editor: Siva Sankar
-- Reason for change: 3HH-11754-AGAB-DFZZA, Extended Inteface Index Support
-- Change: Added new Tables asamIfIndexToExtIfIndexMappingTable
-- and asamExtIfIndexToIfIndexMappingTable
--
-- REVISION "201304250000Z"
-- DESCRIPTION
-- "Version: 3EC36485EDAA_V4.6.0.0.0
-- Editor: Balagopal Velusamy
-- Reason for change: ALU00204502, EFM Inteface Counter Support
-- Change: Added new Table asamIfExtCounterSupportTable
-- Indicates supported counters for an Interface.
--
-- REVISION "201304250000Z"
-- DESCRIPTION
-- "Version: 3EC36485EDAA_V4.6.0.0.0
-- Editor: Karel Meijfroidt
-- Reason for change: ALU01815260, Alarm Mechanism Improvement
-- Change: change the RANGE in the description of
-- the asamIfExtAlmReportingSeverityDefault.
--
-- REVISION "2012101111200Z"
-- DESCRIPTION
-- "Version: 3EC15505EAAA_V4.5.0.0.0
-- Editor: Ludwig Pauwels
-- Changes:
-- * Remove LLU Relay Status Table.
--
-- REVISION "201206071200Z"
-- DESCRIPTION
-- "Version: 3EC15505EAAA_V4.4.4.0.0
-- Editor: Ludwig Pauwels
-- Changes:
-- * Addition of LLU Relay Status Table.
--
-- REVISION "20080108200Z"
-- DESCRIPTION
-- "Version: 3EC15506EAAA_V3.5.0.0.0
-- Editor: Xia Hui
-- Changes: Add one values for asamItfMetallicTestTypes and four values for asamItfMetallicTestCodes
-- *asamItfMetallicTestResetTimer
-- *asamItfLineAdminOperAbnormal
-- *asamItfLineAnotherLineTestInProgress
-- *asamItfTestNotPossible
-- *asamItfLineBusy
--
-- REVISION "20060621200Z"
-- DESCRIPTION
-- "Version: 3EC15506EAAA_V3.5.0.0.0
-- Editor: Liu Jie
-- Changes: Add two values for asamItfMetallicTestTypes
-- * asamItfMetallicTestInwardOnly
-- * asamItfMetallicTestOutwardOnly
--
-- REVISION "20060529200Z"
-- DESCRIPTION
-- "Version: 3EC15506EAAA_V3.2.0.0.0
-- Editor: Sven Dhuyvetter
-- Changes: BDFhw36810: Open SNMP
--
-- REVISION "20060323200Z"
-- DESCRIPTION
-- "Version: 3EC15505EAAA_V3.1.0.0.0
-- Editor: Ma liya
-- Changes:
-- * Extend Customer Id length to support a maximum of 64 characters."
--
-- REVISION "200601231200Z"
-- DESCRIPTION
-- "Version: 3EC15506EAAA_V2.4.0.0.0
-- Editor: Bart Bogaert
-- Changes: Implemented BDFhw70643: strict syntax checks (smilint)"
--
-- REVISION "200506151200Z"
-- DESCRIPTION
-- "Version: 3EC15505EAAA_V2.3.1.0.0
-- Editor: Pradeep Hosaritthi
-- Changes:
-- * Addition of LLU Relay Status Table."
--
-- REVISION "200404081200Z"
-- DESCRIPTION
-- "Version: 3EC15506EAAA_E1.1.0.0
-- Editor: Rafael Van Driessche
-- Changes: addition of asamIfExtIfSpecific."
--
-- REVISION "200401121200Z"
-- DESCRIPTION
-- "Version: 3EC15506EAAA_E1.0.0.0
-- Editor: Rafael Van Driessche
-- Changes: revision for iSAM with only editorial changes."
--
-- REVISION "200205131200Z"
-- DESCRIPTION
-- "Version: 3EC15506AAAA_E5.0.0.1
-- Editor: Frank Devolder
-- Changes:
-- * object asamPhyItfChangeOccurredTrapEnable obsoleted (BDFaa44804)."
--
-- REVISION "200106031200Z"
-- DESCRIPTION
-- "Version: 3EC15506AAAA_E5.0.0.0
-- Editor: Frank Devolder
-- Changes:
-- * add asamShelfPhyItfSummaryTable to support hierarchical summary
-- bitmaps for physical interfaces and make ASAM-level interface
-- bitmaps obsolete."
--
-- REVISION "200011161200Z"
-- DESCRIPTION
-- "Version 3EC15506AAAA_E4.2.0.0
-- Editor: Dominic Chorafakis
-- Changes:
-- * Documenting MAX_PIF size for R4.2: 24 line boards with IMA."
--
-- REVISION "200007111200Z"
-- DESCRIPTION
-- "Version: TBC
-- Editor: H. Dedecker
-- Changes:
-- * ITF_MIB_EXT extended with line test (BDFaa26075)."
--
-- REVISION "199907081200Z"
-- DESCRIPTION
-- "Version: 3EC15506AAAA_R2.0.1
-- Editor: K. Van Eynde
-- Changes:
-- * AsamItfSeverityFilterType extended with noAlarms (BDFaa18947)."
--
-- REVISION "199904301200Z"
-- DESCRIPTION
-- "Version: 3EC15506AAAA_R2.0.0
-- Editor: K. Van Eynde
-- Changes: updates to supporte severity per line feature:
-- * define new type AsamItfSeverityFilterType
-- * extend AsamIfExtEntry with new column asamIfExtAlmReportingSeverity
-- * add table asamIfExtAlmReportingSeverityDefaultTable for default
-- severity per interface type."
-- ===========================================================================
IMPORTS OBJECT-TYPE FROM RFC-1212
DisplayString FROM RFC1213-MIB
Counter, Gauge FROM RFC1155-SMI
asam FROM SYSTEM-MIB
ifIndex, InterfaceIndex FROM ITF-MIB
IANAifType FROM IANAifType-MIB
AsamAlarmSeverityType FROM ASAM-ALARM-MIB
eqptHolderId FROM ASAM-EQUIP-MIB;
AsamItfSeverityFilterType ::= INTEGER {
indeterminate (1), -- Not a definite known severity
warning (2), -- Just to inform as a warning
minor (3), -- Not service affecting
major (4), -- Service affecting
critical (5), -- Service breaking
noAlarms (254), -- do not report alarm
default (255) -- take default as specified in
-- asamIfExtAlmReportingSeverityDefaultTable
}
asamItfMIB OBJECT IDENTIFIER ::= { asam 6 } -- Extensions to MIB-II
asamPhyItfOperStatus OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS obsolete
DESCRIPTION
"The bitmap for the operational status of the physical interfaces.
MAX_PIF: the maximum number of interface per board
SLOTS: the number of slots in the system
Layout: 1..MAX_PIF 1..MAX_PIF ... 1..MAX_PIF
========== ========== ==========
0 1 ... SLOTS-1
Up = 1, Down = 0
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NA INSRVMOD: NA
RANGE: NA DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: This object is not supported."
::= {asamItfMIB 1}
asamPhyItfBitmap OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS obsolete
DESCRIPTION
"The bitmap for the physical interfaces.
MAX_PIF: the maximum number of interface per board
SLOTS: the number of slots in the system
Layout: 1..MAX_PIF 1..MAX_PIF ... 1..MAX_PIF
========== ========== ==========
0 1 ... SLOTS-1
Present = 1, Not present = 0
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NA INSRVMOD: NA
RANGE: NA DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: This object is not supported."
::= {asamItfMIB 2}
asamPhyItfChangeOccurredTrapEnable OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS obsolete
DESCRIPTION
"Boolean indicating wether the changeOccurredTrap should be sent
or not. The trap will not be sent if the linkUpDownTrap was already
sent (regardless of the value asamChangeOccurredTrapEnable).
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NA INSRVMOD: NA
RANGE: NA DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: This object is not supported."
::= {asamItfMIB 3}
asamPhyItfNumberChangeOccurred OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is a counter indicating the number of state changes of the
physical line.
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: NA DEFVALUE: 0
UNITS: NA SPARSE: NA
DESCR: NA"
::= {asamItfMIB 4}
asamIfExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF AsamIfExtEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An extension to the ifTable defined in ITF-MIB.
ALCATEL NOTE:
TABLESIZE: DEP same size as the ifTable."
::= {asamItfMIB 5}
asamIfExtEntry OBJECT-TYPE
SYNTAX AsamIfExtEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry containing management information applicable to a
particular interface."
INDEX { ifIndex }
::= {asamIfExtTable 1}
AsamIfExtEntry ::= SEQUENCE {
asamIfExtCustomerId DisplayString,
asamIfExtAlmReportingSeverity AsamItfSeverityFilterType,
asamIfExtIfSpecific OBJECT IDENTIFIER
}
asamIfExtCustomerId OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..64))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A textual string identifying the customer assigned to this
interface. Following strings have a special meaning:
'reserved' : the interface is reserved by an operator;
'faulty' : the interface is indicated by an operator
as being faulty;
'available': the interface has no customer assigned to it.
This object is only supported for physical interfaces.
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: YES INSRVMOD: YES
RANGE: NA DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NA"
DEFVAL {"available"}
::= {asamIfExtEntry 1}
asamIfExtAlmReportingSeverity OBJECT-TYPE
SYNTAX AsamItfSeverityFilterType
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This objects specifies for a certain physical interface and all
interface above in the interface hierarchy the minimal severity for
an alarm to be reported. If no value is provided for this object,
it will obtain the value 'default', which means the actual value is
as specified in the asamIfExtAlmReportingSeverityDefaultTable.
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: YES INSRVMOD: YES
RANGE: NA DEFVALUE: 'default'
UNITS: NA SPARSE: NA
DESCR: NA"
::= {asamIfExtEntry 2}
asamIfExtIfSpecific OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A reference to MIB definitions specific to the particular media
being used to realize the interface.
If no MIB definitions specific to the particular media are
available, the value should be set to the OBJECT IDENTIFIER { 0 0 }.
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: NA DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NA"
::= {asamIfExtEntry 3}
asamNextAvailablePortType OBJECT-TYPE
SYNTAX IANAifType
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object contains the ifType for which the next available
physical interface can be retrieved. Only values of ifType that
represent physical interfaces are allowed.
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: YES
RANGE: NA DEFVALUE: xdslLine
UNITS: NA SPARSE: NA
DESCR: NA"
::= {asamItfMIB 6}
asamNextAvailablePort OBJECT-TYPE
SYNTAX InterfaceIndex
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object gives the next available physical interface for which
the ifType is as specified in asamNextAvailablePortType. A physical
interface is considered available if its asamIfExtCustomerId has
the value 'available' and its internal ASAM state is 'reachable'.
If no interface of the desired type is available an error (genErr)
is returned when a get-request is issued for this object.
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: NA DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NA"
::= {asamItfMIB 7}
asamIfExtAlmReportingSeverityDefaultTable OBJECT-TYPE
SYNTAX SEQUENCE OF AsamIfExtAlmReportingSeverityDefaultEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table specifying for each of the supported interface types
for asamIfExtAlmReportingSeverity its default minimal severity.
ALCATEL NOTE:
TABLESIZE: DEP number of supported interface types."
::= {asamItfMIB 8}
asamIfExtAlmReportingSeverityDefaultEntry OBJECT-TYPE
SYNTAX AsamIfExtAlmReportingSeverityDefaultEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry of the asamIfExtAlmReportingSeverityDefaultTable.
"
INDEX { asamIfExtIfType }
::= {asamIfExtAlmReportingSeverityDefaultTable 1}
AsamIfExtAlmReportingSeverityDefaultEntry ::= SEQUENCE {
asamIfExtIfType IANAifType,
asamIfExtAlmReportingSeverityDefault AsamAlarmSeverityType
}
asamIfExtIfType OBJECT-TYPE
SYNTAX IANAifType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The type of the interface.
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: NA DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NA"
::= { asamIfExtAlmReportingSeverityDefaultEntry 1 }
asamIfExtAlmReportingSeverityDefault OBJECT-TYPE
SYNTAX AsamAlarmSeverityType
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The default minimal severity for an alarm to be reported that will
be used for interfaces of the type specified in asamIfExtIfType.
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: YES
RANGE: 1-5 DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NA"
DEFVAL {major}
::= { asamIfExtAlmReportingSeverityDefaultEntry 2 }
asamItfTest OBJECT IDENTIFIER ::= {asamItfMIB 9}
-- Extension to EXT MIB-II for line test
asamItfMetallicTestGroup OBJECT IDENTIFIER ::= {asamItfTest 1}
-- First subgroup identifying metallic test group
asamItfMetallicTestTypes OBJECT IDENTIFIER ::= {asamItfMetallicTestGroup 1}
-- First subgroup identifying metallic test types
asamItfMetallicTestLimited OBJECT IDENTIFIER ::=
{asamItfMetallicTestTypes 1}
asamItfMetallicTestTapLooped OBJECT IDENTIFIER ::=
{asamItfMetallicTestTypes 2}
asamItfMetallicTestMonitor OBJECT IDENTIFIER ::=
{asamItfMetallicTestTypes 3}
asamItfMetallicTestSplitAccess OBJECT IDENTIFIER ::=
{asamItfMetallicTestTypes 4}
asamItfMetallicTestInwardOnly OBJECT IDENTIFIER ::=
{asamItfMetallicTestTypes 5}
asamItfMetallicTestOutwardOnly OBJECT IDENTIFIER ::=
{asamItfMetallicTestTypes 6}
asamItfMetallicTestResetTimer OBJECT IDENTIFIER ::=
{asamItfMetallicTestTypes 7}
asamItfMetallicTestCodes OBJECT IDENTIFIER ::= {asamItfMetallicTestGroup 2}
-- Second subgroup identifying metallic test codes
asamItfLineNotReachable OBJECT IDENTIFIER ::=
{asamItfMetallicTestCodes 1}
asamItfPreparingMetallicTest OBJECT IDENTIFIER ::=
{asamItfMetallicTestCodes 2}
asamItfAnotherMetallicTestInProgress OBJECT IDENTIFIER ::=
{asamItfMetallicTestCodes 3}
asamItfTestAppliqueNotReachable OBJECT IDENTIFIER ::=
{asamItfMetallicTestCodes 4}
asamItfPotsSplitterNotReachable OBJECT IDENTIFIER ::=
{asamItfMetallicTestCodes 5}
asamItfWcapNotReachable OBJECT IDENTIFIER ::=
{asamItfMetallicTestCodes 6}
-- reserved for ASAM
asamItfLineBusy OBJECT IDENTIFIER ::=
{asamItfMetallicTestCodes 7}
-- To indicate the line status is not in either idle or power down or parking mode. Currently only for narrowband MTA
asamItfLineAdminOperAbnormal OBJECT IDENTIFIER ::=
{asamItfMetallicTestCodes 8}
-- To indicate the line is either admin lock or oper disable
-- Crrently only for narrowband MTA
asamItfLineAnotherLineTestInProgress OBJECT IDENTIFIER ::=
{asamItfMetallicTestCodes 9}
-- To indicate another line test is in progress. Currently only for NB MTA
asamItfTestNotPossible OBJECT IDENTIFIER ::=
{asamItfMetallicTestCodes 10}
asamShelfPhyItfSummaryTable OBJECT-TYPE
SYNTAX SEQUENCE OF AsamShelfPhyItfSummaryEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Shelf summary table, summarizing status information of physical
interfaces of boards which can be equipped within the
corresponding shelf.
ALCATEL NOTE:
TABLESIZE: DEP number of shelves."
::= { asamItfMIB 10 }
asamShelfPhyItfSummaryEntry OBJECT-TYPE
SYNTAX AsamShelfPhyItfSummaryEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry of the shelf physical interface summary table.
"
INDEX { eqptHolderId }
::= { asamShelfPhyItfSummaryTable 1 }
AsamShelfPhyItfSummaryEntry ::= SEQUENCE {
asamShelfPhyItfNumberChangeOccurred Counter,
asamShelfPhyItfOperStatus OCTET STRING,
asamShelfPhyItfBitmap OCTET STRING
}
asamShelfPhyItfNumberChangeOccurred OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is a counter indicating the number of state changes
of physical lines, equipped on boards within this shelf.
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: NA DEFVALUE: 0
UNITS: state change SPARSE: NA
DESCR: NA"
::= { asamShelfPhyItfSummaryEntry 1 }
asamShelfPhyItfOperStatus OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The bitmap for the operational status of the physical interfaces
of boards which can be equipped within this shelf.
MAX_PIF: the maximum number of physical interfaces per board
(lines + IMA).
SLOTS: the maximum number of slots within a shelf
Layout: 1..MAX_PIF 1..MAX_PIF ... 1..MAX_PIF
========== ========== ==========
0 1 ... SLOTS-1
Up = 1, Down = 0.
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: DEP: #slots*#interfaces per board
DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NA"
::= { asamShelfPhyItfSummaryEntry 2 }
asamShelfPhyItfBitmap OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The bitmap for the presence of the physical interfaces of boards
which can be equipped within this shelf.
MAX_PIF: the maximum number of physical interfaces per board
(lines + IMA).
SLOTS: the maximum number of slots within a shelf
Layout: 1..MAX_PIF 1..MAX_PIF ... 1..MAX_PIF
========== ========== ==========
0 1 ... SLOTS-1
Present = 1, Not present = 0.
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: DEP: #slots*#interfaces per board
DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NA"
::= { asamShelfPhyItfSummaryEntry 3 }
-- =========================================================
-- the following table is supported from R5.3 onwards (e.g. 7367 ISAM SX-16P)
-- =========================================================
asamLluTable OBJECT-TYPE
SYNTAX SEQUENCE OF AsamLluEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The Local Loop Unbundling Table.
ALCATEL NOTE:
TABLESIZE: DEP same size as the ifTable"
::= {asamItfMIB 11}
asamLluEntry OBJECT-TYPE
SYNTAX AsamLluEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the asamLluTable. There will be an entry
for each physical interface line (xdslLine) if the corresponding
board is configured/planned and if the corresponding board
supports LLU, i.e. no entries are auto-created in the MIB
- for boards that are not planned,
- for boards that are planned but for which the HW does
not support LLU.
the operator cannot create an entry nor delete an entry in this
table"
INDEX { ifIndex }
::= { asamLluTable 1}
AsamLluEntry ::= SEQUENCE {
asamLluRelayStatus AsamLluRelayStatus,
asamLluRelayActionTime Gauge,
asamLluRelayOperStatus AsamLluRelayStatus,
asamLluRelayActionTimer Gauge
}
AsamLluRelayStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
" Handling of relay for Local Loop Unbundling.
unbundle (1),-- unbundling LLU relay on the particular physical line
mentioned by a valid physical interface ifIndex.
If LLURelay is unbundled, then the line is
throughconnected to an external connector allowing
to connect the line to another exchange.
connect(2), -- connecting LLU relay on the particular physical line
mentioned by a valid physical interface ifIndex.
If LLURelay state of a particular line is connected
then the line is served by the LT.
For a DSL line this means it will pass to the card
its low and high pass filter. The effect is that
DSL signal is supported by the card, the POTS/ISDN signal is
brought to an external connector.
connectForMelt(3), -- connecting LLU relay for Melt on the particular
physical line mentioned by a valid physical interface ifIndex.
If LLURelay state of a particular line is connected
with Melt then the line is served by the LT and the MELT test block can be used.
For a DSL line this means it will pass to the card
its low and high pass filter and a MELT measurement can be performed. The effect is that
DSL signal is supported by the card, the POTS/ISDN signal is
not connected.
disconnect(4), -- disconnecting LLU relay on the particular physical line
mentioned by a valid physical interface ifIndex.
If LLURelay state of a particular line is disconnected:
-the line is open ended at the LT side
-the MELT test block(if present) on LT is throughconnected to an external connector
This particular state allows for two types of testing:
-an open ended measurement can be performed at end user side
-future: a MELT measurement can be performed for the external link
towards another exchange(if MELT test block present)
disconnectTimed(5), -- Temporarily disconnect LLU relay. After a timeout specified by
asamLluRelayActionTime, the relay goes back to 'connect'"
SYNTAX INTEGER {
unbundle (1),
connect (2),
connectForMelt (3),
disconnect (4),
disconnectTimed (5)
}
asamLluRelayStatus OBJECT-TYPE
SYNTAX AsamLluRelayStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Configured administrative status of the relay. This value is kept persistent
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: YES INSRVMOD: NA
RANGE: NA DEFVALUE: unbundle
UNITS: NA SPARSE: NA
DESCR: NA"
::= {asamLluEntry 1}
asamLluRelayActionTime OBJECT-TYPE
SYNTAX Gauge
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The delay in tenths of seconds during which the relay will be in disconnected state before
switching to connected state after asamLluRelayStatus is configured to 'disconnectTimed'
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: 0..864000 DEFVALUE: 50
UNITS: s/10 SPARSE: NA
DESCR: NA"
::= {asamLluEntry 2}
asamLluRelayOperStatus OBJECT-TYPE
SYNTAX AsamLluRelayStatus
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Operational status of the relay. This represents the actual status of the relay at
any time. The value 'disconnectTimed' does not apply in this context
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: NA DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NA"
::= {asamLluEntry 3}
asamLluRelayActionTimer OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Time in tenths of seconds remaining before switching to connected state after
asamLluRelayStatus is configured to 'disconnectTimed'. 0 means that the
timer associated with disconnectTimed is not active. This can happen when:
- asamLluRelayStatus has never been configured to 'disconnectTimed'
- The timer has been configured with asamLluRelayActionTime = 0
- The timer has expired
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: 0..864000 DEFVALUE: 0
UNITS: s/10 SPARSE: NA
DESCR: NA"
::= {asamLluEntry 4}
asamIfExtCounterSupportTable OBJECT-TYPE
SYNTAX SEQUENCE OF AsamIfExtCounterSupportEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A Table listing the supported counters for a particular interface .
ALCATEL NOTE:
TABLESIZE: DEP number of supported interface types."
::= {asamItfMIB 12 }
asamIfExtCounterSupportEntry OBJECT-TYPE
SYNTAX AsamIfExtCounterSupportEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry containing list of supported counter information applicable to a
particular interface."
INDEX { asamIfExtCounterIndex }
::= {asamIfExtCounterSupportTable 1}
AsamIfExtCounterSupportEntry ::= SEQUENCE {
asamIfExtCounterIndex IANAifType,
asamifTblifDescr INTEGER,
asamifTblifMtu INTEGER,
asamifTblifSpeed INTEGER,
asamifTblifPhysAddress INTEGER,
asamifTblifAdminStatus INTEGER,
asamifTblifOperStatus INTEGER,
asamifTblifLastChange INTEGER,
asamifTblifInOctets INTEGER,
asamifTblifInUcastPkts INTEGER,
asamifTblifInNUcastPkts INTEGER,
asamifTblifInDiscards INTEGER,
asamifTblifInErrors INTEGER,
asamifTblifInUbknownProtos INTEGER,
asamifTblifOutOctets INTEGER,
asamifTblifOutUcastPkts INTEGER,
asamifTblifOutNUcastPkts INTEGER,
asamifTblifOutDiscards INTEGER,
asamifTblifOutErrors INTEGER,
asamifxTblifName INTEGER,
asamifxTblifInMulticastPkts INTEGER,
asamifxTblifInBroadcastPkts INTEGER,
asamifxTblifOutMulticastPkts INTEGER,
asamifxTblifOutBroadcastPkts INTEGER,
asamifxTblifHCInOctets INTEGER,
asamifxTblifHCInUcastPkts INTEGER,
asamifxTblifHCInMulticastPkts INTEGER,
asamifxTblifHCInBroadcastPkts INTEGER,
asamifxTblifHCOutOctets INTEGER,
asamifxTblifHCOutUcastPkts INTEGER,
asamifxTblifHCOutMulticastPkts INTEGER,
asamifxTblifHCOutBroadcastPkts INTEGER,
asamifxTblifLinkUpDownTrapEnable INTEGER,
asamifxTblifHighSpeed INTEGER,
asamifxTblifPromiscuousMode INTEGER,
asamifxTblifConnectorPresent INTEGER,
asamifxTblifAlias INTEGER,
asamifxTblifCounterDiscontinuityTime INTEGER
}
asamIfExtCounterIndex OBJECT-TYPE
SYNTAX IANAifType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A unique non-zero value representing an interface .
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: NA DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NA"
::= { asamIfExtCounterSupportEntry 1 }
asamifTblifDescr OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" A value of 1 indicates that this parameter is supported for the specified interface
A value of 0 indicates that this parameter is not supported for the specified interface .
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: 0..1 DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NA"
::= { asamIfExtCounterSupportEntry 2 }
asamifTblifMtu OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" A value of 1 indicates that this parameter is supported for the specified interface
A value of 0 indicates that this parameter is not supported for the specified interface .
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: 0..1 DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NA"
::= { asamIfExtCounterSupportEntry 3 }
asamifTblifSpeed OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" A value of 1 indicates that this parameter is supported for the specified interface
A value of 0 indicates that this parameter is not supported for the specified interface .
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: 0..1 DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NA"
::= { asamIfExtCounterSupportEntry 4 }
asamifTblifPhysAddress OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" A value of 1 indicates that this parameter is supported for the specified interface
A value of 0 indicates that this parameter is not supported for the specified interface .
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: 0..1 DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NA"
::= { asamIfExtCounterSupportEntry 5 }
asamifTblifAdminStatus OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" A value of 1 indicates that this parameter is supported for the specified interface
A value of 0 indicates that this parameter is not supported for the specified interface .
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: 0..1 DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NA"
::= { asamIfExtCounterSupportEntry 6 }
asamifTblifOperStatus OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" A value of 1 indicates that this parameter is supported for the specified interface
A value of 0 indicates that this parameter is not supported for the specified interface .
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: 0..1 DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NA"
::= { asamIfExtCounterSupportEntry 7 }
asamifTblifLastChange OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" A value of 1 indicates that this parameter is supported for the specified interface
A value of 0 indicates that this parameter is not supported for the specified interface .
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: 0..1 DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NA"
::= { asamIfExtCounterSupportEntry 8 }
asamifTblifInOctets OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" A value of 1 indicates that this parameter is supported for the specified interface
A value of 0 indicates that this parameter is not supported for the specified interface .
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: 0..1 DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NA"
::= { asamIfExtCounterSupportEntry 9 }
asamifTblifInUcastPkts OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" A value of 1 indicates that this parameter is supported for the specified interface
A value of 0 indicates that this parameter is not supported for the specified interface .
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: 0..1 DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NA"
::= { asamIfExtCounterSupportEntry 10 }
asamifTblifInNUcastPkts OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" A value of 1 indicates that this parameter is supported for the specified interface
A value of 0 indicates that this parameter is not supported for the specified interface .
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: 0..1 DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NA"
::= { asamIfExtCounterSupportEntry 11 }
asamifTblifInDiscards OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" A value of 1 indicates that this parameter is supported for the specified interface
A value of 0 indicates that this parameter is not supported for the specified interface .
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: 0..1 DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NA"
::= { asamIfExtCounterSupportEntry 12 }
asamifTblifInErrors OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" A value of 1 indicates that this parameter is supported for the specified interface
A value of 0 indicates that this parameter is not supported for the specified interface .
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: 0..1 DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NA"
::= { asamIfExtCounterSupportEntry 13 }
asamifTblifInUbknownProtos OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" A value of 1 indicates that this parameter is supported for the specified interface
A value of 0 indicates that this parameter is not supported for the specified interface .
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: 0..1 DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NA"
::= { asamIfExtCounterSupportEntry 14 }
asamifTblifOutOctets OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" A value of 1 indicates that this parameter is supported for the specified interface
A value of 0 indicates that this parameter is not supported for the specified interface .
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: 0..1 DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NA"
::= { asamIfExtCounterSupportEntry 15 }
asamifTblifOutUcastPkts OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" A value of 1 indicates that this parameter is supported for the specified interface
A value of 0 indicates that this parameter is not supported for the specified interface .
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: 0..1 DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NA"
::= { asamIfExtCounterSupportEntry 16 }
asamifTblifOutNUcastPkts OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" A value of 1 indicates that this parameter is supported for the specified interface
A value of 0 indicates that this parameter is not supported for the specified interface .
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: 0..1 DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NA"
::= { asamIfExtCounterSupportEntry 17 }
asamifTblifOutDiscards OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" A value of 1 indicates that this parameter is supported for the specified interface
A value of 0 indicates that this parameter is not supported for the specified interface .
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: 0..1 DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NA"
::= { asamIfExtCounterSupportEntry 18 }
asamifTblifOutErrors OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" A value of 1 indicates that this parameter is supported for the specified interface
A value of 0 indicates that this parameter is not supported for the specified interface .
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: 0..1 DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NA"
::= { asamIfExtCounterSupportEntry 19 }
asamifxTblifName OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" A value of 1 indicates that this parameter is supported for the specified interface
A value of 0 indicates that this parameter is not supported for the specified interface .
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: 0..1 DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NA"
::= { asamIfExtCounterSupportEntry 20 }
asamifxTblifInMulticastPkts OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" A value of 1 indicates that this parameter is supported for the specified interface
A value of 0 indicates that this parameter is not supported for the specified interface .
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: 0..1 DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NA"
::= { asamIfExtCounterSupportEntry 21 }
asamifxTblifInBroadcastPkts OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" A value of 1 indicates that this parameter is supported for the specified interface
A value of 0 indicates that this parameter is not supported for the specified interface .
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: 0..1 DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NA"
::= { asamIfExtCounterSupportEntry 22 }
asamifxTblifOutMulticastPkts OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" A value of 1 indicates that this parameter is supported for the specified interface
A value of 0 indicates that this parameter is not supported for the specified interface .
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: 0..1 DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NA"
::= { asamIfExtCounterSupportEntry 23 }
asamifxTblifOutBroadcastPkts OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" A value of 1 indicates that this parameter is supported for the specified interface
A value of 0 indicates that this parameter is not supported for the specified interface .
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: 0..1 DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NA"
::= { asamIfExtCounterSupportEntry 24 }
asamifxTblifHCInOctets OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" A value of 1 indicates that this parameter is supported for the specified interface
A value of 0 indicates that this parameter is not supported for the specified interface .
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: 0..1 DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NA"
::= { asamIfExtCounterSupportEntry 25 }
asamifxTblifHCInUcastPkts OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" A value of 1 indicates that this parameter is supported for the specified interface
A value of 0 indicates that this parameter is not supported for the specified interface .
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: 0..1 DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NA"
::= { asamIfExtCounterSupportEntry 26 }
asamifxTblifHCInMulticastPkts OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" A value of 1 indicates that this parameter is supported for the specified interface
A value of 0 indicates that this parameter is not supported for the specified interface .
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: 0..1 DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NA"
::= { asamIfExtCounterSupportEntry 27 }
asamifxTblifHCInBroadcastPkts OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" A value of 1 indicates that this parameter is supported for the specified interface
A value of 0 indicates that this parameter is not supported for the specified interface .
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: 0..1 DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NA"
::= { asamIfExtCounterSupportEntry 28 }
asamifxTblifHCOutOctets OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" A value of 1 indicates that this parameter is supported for the specified interface
A value of 0 indicates that this parameter is not supported for the specified interface .
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: 0..1 DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NA"
::= { asamIfExtCounterSupportEntry 29 }
asamifxTblifHCOutUcastPkts OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" A value of 1 indicates that this parameter is supported for the specified interface
A value of 0 indicates that this parameter is not supported for the specified interface .
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: 0..1 DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NA"
::= { asamIfExtCounterSupportEntry 30 }
asamifxTblifHCOutMulticastPkts OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" A value of 1 indicates that this parameter is supported for the specified interface
A value of 0 indicates that this parameter is not supported for the specified interface .
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: 0..1 DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NA"
::= { asamIfExtCounterSupportEntry 31 }
asamifxTblifHCOutBroadcastPkts OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" A value of 1 indicates that this parameter is supported for the specified interface
A value of 0 indicates that this parameter is not supported for the specified interface .
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: 0..1 DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NA"
::= { asamIfExtCounterSupportEntry 32 }
asamifxTblifLinkUpDownTrapEnable OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" A value of 1 indicates that this parameter is supported for the specified interface
A value of 0 indicates that this parameter is not supported for the specified interface .
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: 0..1 DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NA"
::= { asamIfExtCounterSupportEntry 33 }
asamifxTblifHighSpeed OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" A value of 1 indicates that this parameter is supported for the specified interface
A value of 0 indicates that this parameter is not supported for the specified interface .
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: 0..1 DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NA"
::= { asamIfExtCounterSupportEntry 34 }
asamifxTblifPromiscuousMode OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" A value of 1 indicates that this parameter is supported for the specified interface
A value of 0 indicates that this parameter is not supported for the specified interface .
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: 0..1 DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NA"
::= { asamIfExtCounterSupportEntry 35 }
asamifxTblifConnectorPresent OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" A value of 1 indicates that this parameter is supported for the specified interface
A value of 0 indicates that this parameter is not supported for the specified interface .
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: 0..1 DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NA"
::= { asamIfExtCounterSupportEntry 36 }
asamifxTblifAlias OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" A value of 1 indicates that this parameter is supported for the specified interface
A value of 0 indicates that this parameter is not supported for the specified interface .
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: 0..1 DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NA"
::= { asamIfExtCounterSupportEntry 37 }
asamifxTblifCounterDiscontinuityTime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" A value of 1 indicates that this parameter is supported for the specified interface
A value of 0 indicates that this parameter is not supported for the specified interface .
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: 0..1 DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NA"
::= { asamIfExtCounterSupportEntry 38 }
-- *********************************************
--
-- IF-INDEX TO EXTENDED IF-INDEX MAPPING TABLE
--
-- This table is a helper table.
--
-- It contains the mapping of the ifIndex to extended ifIndex
-- of all interfaces that have a linear value
--
-- *********************************************
asamIfIndexToExtIfIndexMappingTable OBJECT-TYPE
SYNTAX SEQUENCE OF AsamIfIndexToExtIfIndexMappingEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"ifIndex to extended ifIndex Mapping Table.
ALCATEL NOTE:
TABLESIZE: DEP same size as the ifTable."
::= { asamItfMIB 13 }
asamIfIndexToExtIfIndexMappingEntry OBJECT-TYPE
SYNTAX AsamIfIndexToExtIfIndexMappingEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry containing mapping from ifIndex to extended
ifIndex of interfaces."
INDEX { ifIndex }
::= { asamIfIndexToExtIfIndexMappingTable 1 }
AsamIfIndexToExtIfIndexMappingEntry ::= SEQUENCE {
asamExtIfIndexId1 Gauge,
asamExtIfIndexId2 Gauge,
asamExtIfIndexId3 Gauge
}
asamExtIfIndexId1 OBJECT-TYPE
SYNTAX Gauge (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the first indentifier of the extended-ifIndex
INTEGER.xxxx.xxxx.
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: Gauge DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NA"
::= { asamIfIndexToExtIfIndexMappingEntry 1 }
asamExtIfIndexId2 OBJECT-TYPE
SYNTAX Gauge (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the second indentifier of the extended-ifIndex
xxxx.INTEGER.xxxx.
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: Gauge DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NA"
::= { asamIfIndexToExtIfIndexMappingEntry 2 }
asamExtIfIndexId3 OBJECT-TYPE
SYNTAX Gauge (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the third indentifier of the extended-ifIndex
xxxx.xxxx.INTEGER.
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: Gauge DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NA"
::= { asamIfIndexToExtIfIndexMappingEntry 3 }
-- *********************************************
--
-- EXTENDED IF-INDEX TO IF-INDEX MAPPING TABLE
--
-- This table is a helper table.
--
-- It contains the mapping of the extended-ifIndex to ifIndex
-- of all interfaces that have a linear value
--
-- *********************************************
asamExtIfIndexToIfIndexMappingTable OBJECT-TYPE
SYNTAX SEQUENCE OF AsamExtIfIndexToIfIndexMappingEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Extended-ifIndex to ifIndex Mapping Table.
ALCATEL NOTE:
TABLESIZE: DEP same size as the ifTable."
::= { asamItfMIB 14 }
asamExtIfIndexToIfIndexMappingEntry OBJECT-TYPE
SYNTAX AsamExtIfIndexToIfIndexMappingEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry containing mapping from extended-ifIndex to ifIndex
of interfaces."
-- Type : INTEGER.INTEGER.INTEGER (total 96 bit)
-- asamExtIfIndexId1 -> INTEGER.xxxx.xxxx
-- asamExtIfIndexId2 -> xxxx.INTEGER.xxxx
-- asamExtIfIndexId3 -> xxxx.xxxx.INTEGER
INDEX { asamExtIfIndexId1, asamExtIfIndexId2, asamExtIfIndexId3 }
::= { asamExtIfIndexToIfIndexMappingTable 1 }
AsamExtIfIndexToIfIndexMappingEntry ::= SEQUENCE {
asamIfIndex InterfaceIndex
}
asamIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the ifIndex of the interface.
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: ifIndex DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NA"
::= { asamExtIfIndexToIfIndexMappingEntry 1 }
asamIfPortTypeTable OBJECT-TYPE
SYNTAX SEQUENCE OF AsamIfPortTypeEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"EFM Interface PortType Table.
ALCATEL NOTE:
TABLESIZE: Entry will be equivalent to number of EFM interfaces exist."
::= { asamItfMIB 15 }
asamIfPortTypeEntry OBJECT-TYPE
SYNTAX AsamIfPortTypeEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry appears in this table for each EFM interface exist in the system."
INDEX { ifIndex }
::= { asamIfPortTypeTable 1 }
AsamIfPortTypeEntry ::= SEQUENCE {
asamIfPortType INTEGER
}
asamIfPortType OBJECT-TYPE
SYNTAX INTEGER {
uni(1),
nni(2),
huni(3),
uplink(4),
lemi(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object identifies the whole network service model based
on this interface.
User Network Interface (UNI) is an interface which
specifies one untrust subscriber is connected.
Network to Network Interface (NNI) is an interface which
specifies one trust networks in connected.
Hicap User Network Interface (HUNI) is an interface which
specifies one untrust subscriber is connected, but with hicapacity
services.
Uplink specifies the interface is at the upside of the ISAM, i.e.
connecting the ISAM to the network.
Lemi is a local ethernet management interface. It is supported only
on a restricted set of systems/cards.
ALCATEL NOTE:
ACCESS : NA USAGE : NA
PERSIST: YES INSRVMOD: NA
RANGE : NA DEFVALUE: uni
UNITS : NA SPARSE : NA
DESCR : This Object is supported only for few LTs.Setting of portType is not allowed for native ethernet interfaces.Setting portType as UNI is allowed for all interfaces except native ethernet.Setting portType as NNI is allowed only for EFM intefaces on supported LTs.For ethernet interfaces (native Ethernet) get command will display the portType from extendEtherPortCtrlTable"
::= { asamIfPortTypeEntry 1 }
END
Reference in New Issue Copy Permalink