mibs/MIBS/nokia/TIMETRA-CELLULAR-MIB

2545 lines
92 KiB
Plaintext
Raw Permalink Normal View History

2023-12-05 12:25:34 +01:00
TIMETRA-CELLULAR-MIB DEFINITIONS ::= BEGIN
IMPORTS
InetAddress, InetAddressType
FROM INET-ADDRESS-MIB
MODULE-COMPLIANCE, NOTIFICATION-GROUP,
OBJECT-GROUP
FROM SNMPv2-CONF
Integer32, MODULE-IDENTITY,
NOTIFICATION-TYPE, OBJECT-TYPE,
Unsigned32
FROM SNMPv2-SMI
DateAndTime, DisplayString, RowStatus,
TEXTUAL-CONVENTION, TimeStamp,
TruthValue
FROM SNMPv2-TC
tmnxCardSlotNum, tmnxMDASlotNum
FROM TIMETRA-CHASSIS-MIB
timetraSRMIBModules, tmnxSRConfs,
tmnxSRNotifyPrefix, tmnxSRObjs
FROM TIMETRA-GLOBAL-MIB
tmnxPortNotifyPortId, tmnxPortPortID
FROM TIMETRA-PORT-MIB
TItemDescription, TNamedItemOrEmpty,
TmnxAuthPassword, TmnxEnabledDisabled,
TmnxEnabledDisabledAdminState
FROM TIMETRA-TC-MIB
;
timetraCellularMIBModule MODULE-IDENTITY
LAST-UPDATED "201607180000Z"
ORGANIZATION "Nokia"
CONTACT-INFO
"Nokia SROS Support
Web: http://www.nokia.com"
DESCRIPTION
"This document is the SNMP MIB module for the Nokia SROS implementation
of cellular ports.
Copyright 2016-2018 Nokia. All rights reserved. Reproduction of this
document is authorized on the condition that the foregoing copyright
notice is included.
This SNMP MIB module (Specification) embodies Nokia's
proprietary intellectual property. Nokia retains all
title and ownership in the Specification, including any
revisions.
Nokia grants all interested parties a non-exclusive license to use and
distribute an unmodified copy of this Specification in connection with
management of Nokia products, and without fee, provided this copyright
notice and license appear on all copies.
This Specification is supplied `as is', and Nokia makes no warranty,
either express or implied, as to the use, operation, condition, or
performance of the Specification."
REVISION "201607180000Z"
DESCRIPTION
"Rev 1.0 18 Jul 2016 00:00
Initial version of the TIMETRA-PORT-CELLULAR-MIB."
::= { timetraSRMIBModules 109 }
TmnxCellularPdnProfileId ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"TmnxCellularPdnProfileId identifies a specific Packet Data Network
profile in the system."
SYNTAX Unsigned32 (0..15)
TmnxCellularAccessPointName ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The data type TmnxCellularAccessPointName represents a cellular Access
Point Name (APN)."
REFERENCE
"3GPP TS 23.003 version 14.0.0 Release 14, '3rd Generation
Partnership Project; Technical Specification Group Core Network
and Terminals; Numbering, addressing and identification',
3GPP, June 2016, Section 9, 'Definition of Access Point Name'"
SYNTAX DisplayString (SIZE (0..100))
TmnxCellularImei ::= TEXTUAL-CONVENTION
DISPLAY-HINT "2a-6a-6a-2a"
STATUS current
DESCRIPTION
"The data type TmnxCellularImei represents an International Mobile
Station Equipment Identity (IMEI) number."
REFERENCE
"3GPP TS 23.003 version 14.0.0 Release 14, '3rd Generation
Partnership Project; Technical Specification Group Core Network
and Terminals; Numbering, addressing and identification',
3GPP, June 2016, Section 6, 'International Mobile Station
Equipment Identity and Software Version Number'"
SYNTAX DisplayString (SIZE (0|15..16))
TmnxCellularSimCardNumber ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"TmnxCellularSimCardNumber identifies a specific cellular Subscriber
Identity Module (SIM) card in a system."
SYNTAX Unsigned32 (1..2)
TmnxCellularSimCardIccid ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The data type TmnxCellularSimCardIccid represents an Integrated
Circuit Card Identifier (ICCID). Each SIM card has a unique
ICCID."
REFERENCE
"ITU-T E.118, 'The international telecommunication charge card',
ITU-T, May 2006, Section 4, 'Numbering system'"
SYNTAX DisplayString (SIZE (0..20))
TmnxCellularImsi ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The data type TmnxCellularImsi represents an International
Mobile Subscriber Identity. An IMSI uniquely identifies a
mobile subscriber."
REFERENCE
"3GPP TS 23.003 version 14.0.0 Release 14, '3rd Generation
Partnership Project; Technical Specification Group Core Network
and Terminals; Numbering, addressing and identification',
3GPP, June 2016, Section 2, 'Identification of mobile subscribers'"
SYNTAX DisplayString (SIZE (0..15))
TmnxCellularPdnId ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"TmnxCellularPdnId identifies a specific Packet Data Network (PDN) on a
cellular port."
SYNTAX Unsigned32 (1)
TmnxCellularChannelNumber ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"TmnxCellularChannelNumber identifies an channel number. For LTE,
this is an E-UTRA Absolute Radio Frequency Channel Number (EARFCN),
as described in 3GPP TS 36.101."
REFERENCE
"3GPP TS 36.101 version 14.1.0 Release 14, '3rd Generation
Partnership Project; Technical Specification Group Radio Access
Network; Evolved Universal Terrestrial Radio Access (E-UTRA);
User Equipment (UE) radio transmission and reception (Release 14),
3GPP, September 2016, Table 5.7.3-1, 'E-UTRA channel numbers"
SYNTAX Unsigned32 (0..262143)
TmnxCellularBearerRate ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"TmnxCellularBearerRate identifies a bit rate of a bearer on a cellular
interface, in kbit/s."
SYNTAX Unsigned32 (0..100000)
tmnxCellularObjs OBJECT IDENTIFIER ::= { tmnxSRObjs 109 }
tmnxCellularConfigObjs OBJECT IDENTIFIER ::= { tmnxCellularObjs 2 }
tmnxCellularConfigTimestamps OBJECT IDENTIFIER ::= { tmnxCellularConfigObjs 1 }
tmnxCellPdnProfileTblLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxCellPdnProfileTblLastChanged indicates the sysUpTime
at the time of the most recent management-initiated change to the
table tmnxCellularPdnProfileTable."
::= { tmnxCellularConfigTimestamps 1 }
tmnxCellSimCardTableLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxCellSimCardTableLastChanged indicates the sysUpTime
at the time of the most recent management-initiated change to the
table tmnxCellularSimCardTable."
::= { tmnxCellularConfigTimestamps 2 }
tmnxCellPdnTblLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxCellPdnTblLastChanged indicates the sysUpTime at the
time of the most recent management-initiated change to the table
tmnxCellularPdnTable."
::= { tmnxCellularConfigTimestamps 3 }
tmnxCellPortTblLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxCellPortTblLastChanged indicates the sysUpTime at the
time of the most recent management-initiated change to the table
tmnxCellularPortTable."
::= { tmnxCellularConfigTimestamps 4 }
tmnxCellPortCbsdAuthCfgTblLstChg OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxCellPortCbsdAuthCfgTblLstChg indicates the sysUpTime
at the time of the most recent management-initiated change to the
table tmnxCellPortCbsdAuthCfgTable."
::= { tmnxCellularConfigTimestamps 5 }
tmnxCellularSystemConfigObjs OBJECT IDENTIFIER ::= { tmnxCellularConfigObjs 2 }
tmnxCellularPdnProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF TmnxCellPdnProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The tmnxCellularPdnProfileTable has a series of configurations,
applicable to cellular Packet Data Networks, which are indexed by a
PDN profile number."
::= { tmnxCellularSystemConfigObjs 1 }
tmnxCellPdnProfileEntry OBJECT-TYPE
SYNTAX TmnxCellPdnProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents a specific PDN profile.
The system automatically creates one entry, at index 0, to represent
the default PDN profile. The user cannot modify the configuration
of this default profile.
Other entries can be created and deleted via SNMP SET operations, and
the user can modify the configuration of those entries."
INDEX { tmnxCellPdnProfileId }
::= { tmnxCellularPdnProfileTable 1 }
TmnxCellPdnProfileEntry ::= SEQUENCE
{
tmnxCellPdnProfileId TmnxCellularPdnProfileId,
tmnxCellPdnProfRowStatus RowStatus,
tmnxCellPdnProfLastChanged TimeStamp,
tmnxCellPdnProfDescription TItemDescription,
tmnxCellPdnProfApn TmnxCellularAccessPointName,
tmnxCellPdnProfAuthType INTEGER,
tmnxCellPdnProfUsername DisplayString,
tmnxCellPdnProfPassword TmnxAuthPassword,
tmnxCellPdnProfProtocol INTEGER
}
tmnxCellPdnProfileId OBJECT-TYPE
SYNTAX TmnxCellularPdnProfileId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of tmnxCellPdnProfileId specifies the number of a specific
PDN profile configured in the system.
The value 0 is reserved for a default profile, which is automatically
created by the system, and cannot be modified or deleted by the user."
::= { tmnxCellPdnProfileEntry 1 }
tmnxCellPdnProfRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxCellPdnProfRowStatus specifies the row status of the
PDN profile entry. It is used to control the creation and deletion of
PDN profiles.
The user cannot delete the PDN profile whose tmnxCellPdnProfileId has
a value of 0."
::= { tmnxCellPdnProfileEntry 2 }
tmnxCellPdnProfLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxCellPdnProfLastChanged indicates the sysUpTime at the
time of the most recent management-initiated change to this table row.
For the default PDN profile, tmnxCellPdnProfLastChanged has a value of
0"
::= { tmnxCellPdnProfileEntry 3 }
tmnxCellPdnProfDescription OBJECT-TYPE
SYNTAX TItemDescription
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxCellPdnProfDescription specifies a user provided
description for this PDN profile.
For the default PDN profile, tmnxCellPdnProfDescription has a value of
'default profile'"
DEFVAL { ''H }
::= { tmnxCellPdnProfileEntry 4 }
tmnxCellPdnProfApn OBJECT-TYPE
SYNTAX TmnxCellularAccessPointName
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxCellPdnProfApn specifies the APN for this PDN.
The cellular service provider may require the user to program the APN
value in order to use the service.
For the default PDN profile, tmnxCellPdnProfApn has a value of the
empty string"
DEFVAL { ''H }
::= { tmnxCellPdnProfileEntry 5 }
tmnxCellPdnProfAuthType OBJECT-TYPE
SYNTAX INTEGER {
none (0),
pap (1),
chap (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxCellPdnProfAuthType specifies the method of
authentication used on the PDN.
For the default PDN profile, tmnxCellPdnProfAuthType has a value of
'none (0)'."
DEFVAL { none }
::= { tmnxCellPdnProfileEntry 6 }
tmnxCellPdnProfUsername OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxCellPdnProfUsername specifies the username when
authenticating the PDN.
For the default PDN profile, tmnxCellPdnProfUsername has a value of
the empty string."
DEFVAL { ''H }
::= { tmnxCellPdnProfileEntry 7 }
tmnxCellPdnProfPassword OBJECT-TYPE
SYNTAX TmnxAuthPassword
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxCellPdnProfPassword specifies the password when
authenticating the PDN.
A get request on this object always returns an empty string.
For the default PDN profile, tmnxCellPdnProfPassword has a value of
the empty string."
DEFVAL { ''H }
::= { tmnxCellPdnProfileEntry 8 }
tmnxCellPdnProfProtocol OBJECT-TYPE
SYNTAX INTEGER {
ipv4 (1),
ipv6 (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxCellPdnProfProtocol specifies whether the PDN shall
use IPv4 or IPv6 addresses.
For the default PDN profile, tmnxCellPdnProfProtocol has a value of
ipv4."
DEFVAL { ipv4 }
::= { tmnxCellPdnProfileEntry 9 }
tmnxCellularPortConfigObjs OBJECT IDENTIFIER ::= { tmnxCellularConfigObjs 3 }
tmnxCellularSimCardTable OBJECT-TYPE
SYNTAX SEQUENCE OF TmnxCellularSimCardEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The tmnxCellularSimCardTable has an entry for each SIM card in the
system."
::= { tmnxCellularPortConfigObjs 1 }
tmnxCellularSimCardEntry OBJECT-TYPE
SYNTAX TmnxCellularSimCardEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents a SIM card for a cellular port in the
system. Entries are automatically created by the system, and cannot be
created or deleted via SNMP SET operations.
The system creates an entry for each possible SIM card that can
be installed into the system. Each SIM card is associated with a
specific cellular port in the system."
INDEX {
tmnxPortPortID,
tmnxCellSimCardId
}
::= { tmnxCellularSimCardTable 1 }
TmnxCellularSimCardEntry ::= SEQUENCE
{
tmnxCellSimCardId TmnxCellularSimCardNumber,
tmnxCellSimCardLastChanged TimeStamp,
tmnxCellSimCardDescription TItemDescription,
tmnxCellSimCardPin OCTET STRING,
tmnxCellSimCardFailureDuration Unsigned32,
tmnxCellSimCardPortStateSwitch TruthValue,
tmnxCellSimCardBgpStateSwitch TruthValue
}
tmnxCellSimCardId OBJECT-TYPE
SYNTAX TmnxCellularSimCardNumber
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of tmnxCellSimCardId specifies a SIM card on a cellular
port."
::= { tmnxCellularSimCardEntry 1 }
tmnxCellSimCardLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxCellSimCardLastChanged indicates the sysUpTime at the
time of the most recent management-initiated change to this table row."
::= { tmnxCellularSimCardEntry 2 }
tmnxCellSimCardDescription OBJECT-TYPE
SYNTAX TItemDescription
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of tmnxCellSimCardDescription specifies a user provided
description for this SIM card."
DEFVAL { ''H }
::= { tmnxCellularSimCardEntry 3 }
tmnxCellSimCardPin OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0|4..8))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of tmnxCellSimCardPin specifies the Personal
Identification Number of the SIM card. This is required
in order to access a locked SIM card.
A get request on this object always returns an empty string."
DEFVAL { ''H }
::= { tmnxCellularSimCardEntry 4 }
tmnxCellSimCardFailureDuration OBJECT-TYPE
SYNTAX Unsigned32 (1..60)
UNITS "minutes"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of tmnxCellSimCardFailureDuration specifies the amount or
time that the system will wait before switching SIM cards.
The system will only automatically switch SIM cards if
tmnxCellMdaAdminActiveSim is set to 'automatic', and
if the failover criteria is met. The value of
tmnxCellSimCardPortStateSwitch and tmnxCellSimCardBgpStateSwitch
control the failover criteria."
DEFVAL { 5 }
::= { tmnxCellularSimCardEntry 5 }
tmnxCellSimCardPortStateSwitch OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of tmnxCellSimCardPortStateSwitch specifies whether or not
the system will automatically switch to the other SIM card if the port
corresponding to this SIM card remains operationally down for the
duration specified by tmnxCellSimCardFailureDuration.
The system will only automatically switch SIM cards if
tmnxCellMdaAdminActiveSim is set to 'automatic'.
At least one of the SIM switch criteria tmnxCellSimCardPortStateSwitch
or tmnxCellSimCardBgpStateSwitch must be enabled for a given SIM card."
DEFVAL { true }
::= { tmnxCellularSimCardEntry 6 }
tmnxCellSimCardBgpStateSwitch OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of tmnxCellSimCardBgpStateSwitch specifies whether or not
the system will automatically switch to the other SIM card if all BGP
sessions corresponding to this SIM card are not established for the
duration specified by tmnxCellSimCardFailureDuration.
The system will only automatically switch SIM cards if
tmnxCellMdaAdminActiveSim is set to 'automatic'.
At least one of the SIM switch criteria tmnxCellSimCardPortStateSwitch
or tmnxCellSimCardBgpStateSwitch must be enabled for a given SIM card."
DEFVAL { false }
::= { tmnxCellularSimCardEntry 7 }
tmnxCellularPdnTable OBJECT-TYPE
SYNTAX SEQUENCE OF TmnxCellularPdnEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The tmnxCellularPdnTable has a series of configurations for Packet
Data Networks (PDNs), which are configured against a cellular port and
associated with a specific SIM card."
::= { tmnxCellularPortConfigObjs 2 }
tmnxCellularPdnEntry OBJECT-TYPE
SYNTAX TmnxCellularPdnEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents a specific Packet Data Network.
A Packet Data Network is associated with a specific cellular port and
SIM card.
Entries can be created and deleted via SNMP SET operations."
INDEX {
tmnxPortPortID,
tmnxCellPdnId
}
::= { tmnxCellularPdnTable 1 }
TmnxCellularPdnEntry ::= SEQUENCE
{
tmnxCellPdnId TmnxCellularPdnId,
tmnxCellPdnRowStatus RowStatus,
tmnxCellPdnLastChanged TimeStamp,
tmnxCellPdnProfile TmnxCellularPdnProfileId
}
tmnxCellPdnId OBJECT-TYPE
SYNTAX TmnxCellularPdnId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of tmnxCellPdnId specifies a Packet Data Network on a
cellular port."
::= { tmnxCellularPdnEntry 1 }
tmnxCellPdnRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxCellPdnRowStatus specifies the row status of the PDN
entry. It is used to control the creation and deletion of Packet Data
Networks on a cellular port."
::= { tmnxCellularPdnEntry 2 }
tmnxCellPdnLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxCellPdnLastChanged indicates the sysUpTime at the
time of the most recent management-initiated change to this table row."
::= { tmnxCellularPdnEntry 3 }
tmnxCellPdnProfile OBJECT-TYPE
SYNTAX TmnxCellularPdnProfileId
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxCellPdnProfile specifies the PDN profile that
is associated with this Packet Data Network. The configuration of a
PDN is contained corresponding table row of
tmnxCellularPdnProfileTable."
DEFVAL { 0 }
::= { tmnxCellularPdnEntry 4 }
tmnxCellularPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF TmnxCellularPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The tmnxCellularPortTable has an entry for each cellular port in the
system."
::= { tmnxCellularPortConfigObjs 3 }
tmnxCellularPortEntry OBJECT-TYPE
SYNTAX TmnxCellularPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents a cellular port in the system. Entries are
automatically created by the system, and cannot be created or deleted
via SNMP SET operations."
INDEX { tmnxPortPortID }
::= { tmnxCellularPortTable 1 }
TmnxCellularPortEntry ::= SEQUENCE
{
tmnxCellPortLastChanged TimeStamp,
tmnxCellPortBand125MaxPowerLevel Unsigned32,
tmnxCellPortSyncSysTime TruthValue
}
tmnxCellPortLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxCellPortLastChanged indicates the sysUpTime at the
time of the most recent management-initiated change to this table row."
::= { tmnxCellularPortEntry 1 }
tmnxCellPortBand125MaxPowerLevel OBJECT-TYPE
SYNTAX Unsigned32 (1..20)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of tmnxCellPortBand125MaxPowerLevel specifies the maximum
power level that may be transmitted by the band 125 LTE radio on some
variants of the SAR-Hm.
A value of 1 specifies that the radio may transmit at its maximum
power level. Higher values reduce the maximum transmitted power
level of the band 125 radio, with a value of 20 specifying the lowest
maximum power level."
REFERENCE
"7705 SAR-Hm, Release 15.0.R4, 'SAR-Hm Chassis Installation Guide',
Nokia, October 2017, Section 4.9 'Site Preparation and Engineering
Guidelines for 7705 SAR-Hm B125 Antennas'"
DEFVAL { 1 }
::= { tmnxCellularPortEntry 2 }
tmnxCellPortSyncSysTime OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of tmnxCellPortSyncSysTime specifies whether the system time
is synchronized on the cellular port."
DEFVAL { false }
::= { tmnxCellularPortEntry 3 }
tmnxCellularMdaTable OBJECT-TYPE
SYNTAX SEQUENCE OF TmnxCellularMdaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The tmnxCellularMdaTable has an entry for each cellular MDA in the
system."
::= { tmnxCellularPortConfigObjs 4 }
tmnxCellularMdaEntry OBJECT-TYPE
SYNTAX TmnxCellularMdaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents a cellular MDA in the system. Entries are
automatically created by the system, and cannot be created or deleted
via SNMP SET operations."
INDEX {
tmnxCardSlotNum,
tmnxMDASlotNum
}
::= { tmnxCellularMdaTable 1 }
TmnxCellularMdaEntry ::= SEQUENCE
{
tmnxCellMdaLastChanged TimeStamp,
tmnxCellMdaAdminActiveSim INTEGER,
tmnxCellMdaDownResetInterval Unsigned32,
tmnxCellMdaDownResetCriteria BITS,
tmnxCellMdaDownResetPending TruthValue,
tmnxCellMdaDownResetTime Unsigned32,
tmnxCellMdaPreferredSim TmnxCellularSimCardNumber,
tmnxCellMdaOperActiveSim TmnxCellularSimCardNumber,
tmnxCellMdaSimCardSwitchPending TruthValue,
tmnxCellMdaSimCardSwitchTime Unsigned32,
tmnxCellMdaSimCardLastSwitchTime TimeStamp,
tmnxCellMdaSimLastSwitchReason INTEGER,
tmnxCellMdaSpecFirmwareVersion DisplayString,
tmnxCellMdaMaxTxPower Integer32
}
tmnxCellMdaLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxCellMdaLastChanged indicates the sysUpTime at the
time of the most recent management-initiated change to this table row."
::= { tmnxCellularMdaEntry 1 }
tmnxCellMdaAdminActiveSim OBJECT-TYPE
SYNTAX INTEGER {
sim-1 (1),
sim-2 (2),
automatic (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of tmnxCellMdaAdminActiveSim specifies which SIM card shall
be active on the MDA.
A value of 'sim-1' or 'sim-2' specifies that the system will use the SIM card
in that slot as the active SIM card. If there is no SIM card in that
slot, or if the system cannot establish service using that SIM card, the
system will continue to use that SIM card, regardless of the contents of
the other SIM card slot.
A value of 'automatic' specifies that the system will automatically
switch between SIM cards if it cannot establish service."
DEFVAL { sim-1 }
::= { tmnxCellularMdaEntry 2 }
tmnxCellMdaDownResetInterval OBJECT-TYPE
SYNTAX Unsigned32 (0..240)
UNITS "minutes"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of tmnxCellMdaDownResetInterval specifies the interval, in
minutes, after which the system will reset if it cannot establish
service over the cellular interface.
A value of 0 specifies that the system will not reset if it cannot
establish service over the cellular interface."
DEFVAL { 0 }
::= { tmnxCellularMdaEntry 3 }
tmnxCellMdaDownResetCriteria OBJECT-TYPE
SYNTAX BITS {
port (0),
bgp (1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of tmnxCellMdaDownResetCriteria specifies the criteria to
decide whether or not service is operational over the cellular
interface.
If the 'port' bit is set, cellular service is deemed inoperational if
no cellular port is operationally up.
If the 'bgp' bit is set, cellular service is deemed inoperational if
there is no BGP peer established with a configured local address
corresponding to a cellular interface.
Multiple bits may be set simultaneously. If so, the system evaluates
each criterion independently."
DEFVAL { { port } }
::= { tmnxCellularMdaEntry 4 }
tmnxCellMdaDownResetPending OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxCellMdaDownResetPending indicates if the current
state of the system will cause the system to reset, due to the
criteria configured by tmnxCellMdaDownResetCriteria.
If the system remains in this state for the duration indicated by
tmnxCellMdaDownResetInterval, it will automatically reset.
This value will only be true if tmnxCellMdaDownResetInterval is
configured to a non-zero value."
::= { tmnxCellularMdaEntry 5 }
tmnxCellMdaDownResetTime OBJECT-TYPE
SYNTAX Unsigned32 (0..14400)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxCellMdaDownResetTime indicates the amount of time
remaining before the system will reset, due to the criteria specified
by tmnxCellMdaDownResetCriteria.
If tmnxCellMdaDownResetPending is false, tmnxCellMdaDownResetTime will
have a value of 0."
::= { tmnxCellularMdaEntry 6 }
tmnxCellMdaPreferredSim OBJECT-TYPE
SYNTAX TmnxCellularSimCardNumber
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of tmnxCellMdaPreferredSim specifies which SIM card shall be
used as the active SIM upon system initialization when
tmnxCellMdaAdminActiveSim is set to 'automatic'."
DEFVAL { 1 }
::= { tmnxCellularMdaEntry 7 }
tmnxCellMdaOperActiveSim OBJECT-TYPE
SYNTAX TmnxCellularSimCardNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxCellMdaOperActiveSim indicates which SIM card is
active on the MDA."
::= { tmnxCellularMdaEntry 8 }
tmnxCellMdaSimCardSwitchPending OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxCellMdaSimCardSwitchPending indicates if the current
state of the system will cause a SIM switch.
If the system remains in this state for the duration indicated by
tmnxCellMdaSimCardSwitchTime, it will automatically switch the MDA to
use the other SIM card.
This value will only be true if tmnxCellMdaAdminActiveSim is set to
'automatic'."
::= { tmnxCellularMdaEntry 9 }
tmnxCellMdaSimCardSwitchTime OBJECT-TYPE
SYNTAX Unsigned32 (0..3600)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxCellMdaSimCardSwitchTime indicates the amount of time
remaining before the system will automatically switch SIM cards if the
system remains in its current state.
If tmnxCellMdaSimCardSwitchPending is false,
tmnxCellMdaSimCardSwitchTime will have a value of 0."
::= { tmnxCellularMdaEntry 10 }
tmnxCellMdaSimCardLastSwitchTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxCellMdaSimCardLastSwitchTime indicates the value of
sysUpTime the last time that the system switched the operationally
active SIM card on the cellular MDA.
If the system has not switched the active SIM card,
tmnxCellMdaSimCardLastSwitchTime will have a value of 0."
::= { tmnxCellularMdaEntry 11 }
tmnxCellMdaSimLastSwitchReason OBJECT-TYPE
SYNTAX INTEGER {
none (0),
manual-configuration (1),
forced-switch (2),
cellular-port-down (3),
no-bgp-neighbor (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxCellMdaSimLastSwitchReason indicates the reason why
the system last switched the operationally active SIM card on the
cellular MDA.
If the system has not switched the active SIM card,
tmnxCellMdaSimLastSwitchReason will have a value of 'none'."
::= { tmnxCellularMdaEntry 12 }
tmnxCellMdaSpecFirmwareVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxCellMdaSpecFirmwareVersion indicates the firmware
version that the system is configured to use on the cellular modem.
An empty string indicates that the user has not specified that the
system should use different modem firmware than the version that is
bundled within SROS."
::= { tmnxCellularMdaEntry 13 }
tmnxCellMdaMaxTxPower OBJECT-TYPE
SYNTAX Integer32 (1..23)
UNITS "decibel-milliwatts"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of tmnxCellMdaMaxTxPower specifies the maximum transmit
power of the cellular interface on the MDA. This object only applies
to platforms with cellular interfaces that support Citizen's Broadband
Radio Service (CBRS) frequency bands. On those platforms, this value
specifies the maximum transmit power regardless of the frequency band.
On platforms that do not support CBRS frequency bands, the value of
tmnxCellMdaMaxTxPower has no effect."
DEFVAL { 23 }
::= { tmnxCellularMdaEntry 14 }
tmnxCellPortCbsdAuthCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF TmnxCellPortCbsdAuthCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The tmnxCellPortCbsdAuthCfgTable has an entry for each cellular port
in the system pertaining to CBSD authorization configuration."
::= { tmnxCellularPortConfigObjs 5 }
tmnxCellPortCbsdAuthCfgEntry OBJECT-TYPE
SYNTAX TmnxCellPortCbsdAuthCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents the CBSD authorization configuration for a
cellular port in the system. Entries are automatically created by the
system, and cannot be created or deleted via SNMP SET operations."
AUGMENTS { tmnxCellularPortEntry }
::= { tmnxCellPortCbsdAuthCfgTable 1 }
TmnxCellPortCbsdAuthCfgEntry ::= SEQUENCE
{
tmnxCellPortCbsdAuthCfgLstChange TimeStamp,
tmnxCellPortCbsdAuthAdminState TmnxEnabledDisabledAdminState,
tmnxCellPortCbsdAuthUserId DisplayString,
tmnxCellPortCbsdAuthAntennaGain Unsigned32,
tmnxCellPortCbsdAuthClntTlsProf TNamedItemOrEmpty,
tmnxCellPortCbsdAuthPriSasSvrUrl DisplayString,
tmnxCellPortCbsdAuthSecSasSvrUrl DisplayString,
tmnxCellPortCbsdAuthCategory INTEGER
}
tmnxCellPortCbsdAuthCfgLstChange OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxCellPortCbsdAuthCfgLstChange indicates the sysUpTime
at the time of the most recent management-initiated change to this
table row."
::= { tmnxCellPortCbsdAuthCfgEntry 1 }
tmnxCellPortCbsdAuthAdminState OBJECT-TYPE
SYNTAX TmnxEnabledDisabledAdminState
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of tmnxCellPortCbsdAuthAdminState specifies the
administrative state of the CBSD authorization for the cellular port."
DEFVAL { disabled }
::= { tmnxCellPortCbsdAuthCfgEntry 2 }
tmnxCellPortCbsdAuthUserId OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..253))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of tmnxCellPortCbsdAuthUserId specifies the CBSD
authorization user ID for the cellular port."
DEFVAL { "" }
::= { tmnxCellPortCbsdAuthCfgEntry 3 }
tmnxCellPortCbsdAuthAntennaGain OBJECT-TYPE
SYNTAX Unsigned32 (0..14)
UNITS "decibel-milliwatts"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of tmnxCellPortCbsdAuthAntennaGain specifies the CBSD
authorization antenna gain for the cellular port."
DEFVAL { 0 }
::= { tmnxCellPortCbsdAuthCfgEntry 4 }
tmnxCellPortCbsdAuthClntTlsProf OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of tmnxCellPortCbsdAuthClntTlsProf specifies the CBSD
authorization client TLS profile name for the cellular port."
DEFVAL { "" }
::= { tmnxCellPortCbsdAuthCfgEntry 5 }
tmnxCellPortCbsdAuthPriSasSvrUrl OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of tmnxCellPortCbsdAuthPriSasSvrUrl specifies the CBSD
authorization primary SAS server for the cellular port."
DEFVAL { "" }
::= { tmnxCellPortCbsdAuthCfgEntry 6 }
tmnxCellPortCbsdAuthSecSasSvrUrl OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of tmnxCellPortCbsdAuthSecSasSvrUrl specifies the CBSD
authorization secondary SAS server for the cellular port."
DEFVAL { "" }
::= { tmnxCellPortCbsdAuthCfgEntry 7 }
tmnxCellPortCbsdAuthCategory OBJECT-TYPE
SYNTAX INTEGER {
a (1),
b (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of tmnxCellPortCbsdAuthCategory specifies the CBSD
authorization category."
DEFVAL { a }
::= { tmnxCellPortCbsdAuthCfgEntry 8 }
tmnxCellularStatusObjs OBJECT IDENTIFIER ::= { tmnxCellularObjs 3 }
tmnxCellularPortStatusObjs OBJECT IDENTIFIER ::= { tmnxCellularStatusObjs 1 }
tmnxCellularPortStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF TmnxCellularPortStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The tmnxCellularPortStatusTable has an entry for each cellular port in
the system."
::= { tmnxCellularPortStatusObjs 1 }
tmnxCellularPortStatusEntry OBJECT-TYPE
SYNTAX TmnxCellularPortStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents a cellular port in the system. Entries
are automatically created by the system, and cannot be created or
deleted via SNMP SET operations.
The tmnxCellularPortStatusEntry contains attributes that are unique to
the Cellular TmnxPortType."
INDEX { tmnxPortPortID }
::= { tmnxCellularPortStatusTable 1 }
TmnxCellularPortStatusEntry ::= SEQUENCE
{
tmnxCellPortImei TmnxCellularImei,
tmnxCellPortRegistrationStatus INTEGER,
tmnxCellPortWirelessTechnology INTEGER,
tmnxCellPortFrequencyBand Unsigned32,
tmnxCellPortChannelNumber TmnxCellularChannelNumber,
tmnxCellPortAreaCode DisplayString,
tmnxCellPortCellIdentity DisplayString,
tmnxCellPortRssi Integer32,
tmnxCellPortRsrp Integer32,
tmnxCellPortRscp Integer32,
tmnxCellPortRsrq Integer32,
tmnxCellPortSinr Integer32
}
tmnxCellPortImei OBJECT-TYPE
SYNTAX TmnxCellularImei
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxCellPortImei indicates the International Mobile
Station Equipment Identity number assigned to this cellular port."
::= { tmnxCellularPortStatusEntry 1 }
tmnxCellPortRegistrationStatus OBJECT-TYPE
SYNTAX INTEGER {
not-registered (0),
registered-home (1),
searching (2),
denied (3),
no-network (4),
registered-roaming (5),
sms-only-home (6),
sms-only-roaming (7),
emergency-only (8),
csfb-not-preferred-home (9),
csfb-not-preferred-roaming (10)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxCellPortRegistrationStatus indicates the Evolved
Packet System (EPS) network registration status of the cellular port."
REFERENCE
"3GPP TS 27.007 version 14.0.0 Release 14, '3rd Generation Partnership Project;
Technical Specification Group Core Network and Terminals; AT command
set for User Equipment (UE)', 3GPP, December 2016, Section 10.1.22,
'EPS network registration status +CEREG'"
::= { tmnxCellularPortStatusEntry 2 }
tmnxCellPortWirelessTechnology OBJECT-TYPE
SYNTAX INTEGER {
none (0),
lte (1),
wcdma (2),
gsm (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxCellPortWirelessTechnology indicates the wireless
technology currently in use on the cellular port."
::= { tmnxCellularPortStatusEntry 3 }
tmnxCellPortFrequencyBand OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxCellPortFrequencyBand indicates the frequency band
currently in use by the cellular port.
For LTE, this is an E-UTRA Operating Band, as listed in Table 5.5-1 of
3GPP TS 36.101."
REFERENCE
"3GPP TS 36.101 version 14.1.0 (2016-09), '3rd Generation
Partnership Project; Technical Specification Group Radio Access
Network; Evolved Universal Terrestrial Radio Access (E-UTRA);
User Equipment (UE) radio transmission and reception,
3GPP, September 2016, Table 5.5-1, 'E-UTRA operating bands'"
::= { tmnxCellularPortStatusEntry 4 }
tmnxCellPortChannelNumber OBJECT-TYPE
SYNTAX TmnxCellularChannelNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxCellPortChannelNumber indicates the channel number
currently in use."
::= { tmnxCellularPortStatusEntry 5 }
tmnxCellPortAreaCode OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..4))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxCellPortAreaCode indicates the tracking area code or
location area code currently in use."
REFERENCE
"3GPP TS 23.003 version 14.0.0 Release 14, '3rd Generation
Partnership Project; Technical Specification Group Core Network
and Terminals; Numbering, addressing and identification',
3GPP, June 2016, Section 19.4.2.3 'Tracking Area Identity (TAI)';
Section 4.1, 'Composition of the Location Area Identification (LAI)'"
::= { tmnxCellularPortStatusEntry 6 }
tmnxCellPortCellIdentity OBJECT-TYPE
SYNTAX DisplayString (SIZE (8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxCellPortCellIdentity indicates the
GERAN/UTRAN/E-UTRAN cell identity of the cell currently in use."
REFERENCE
"3GPP TS 23.003 version 14.0.0 Release 14, '3rd Generation
Partnership Project; Technical Specification Group Core Network
and Terminals; Numbering, addressing and identification',
3GPP, June 2016, Section 4.3.1 'Cell Identity (CI) and Cell Global
Identification (CGI)'"
::= { tmnxCellularPortStatusEntry 7 }
tmnxCellPortRssi OBJECT-TYPE
SYNTAX Integer32 (-113..-51 | 0)
UNITS "decibel-milliwatts"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxCellPortRssi indicates the received signal strength,
in decibel-milliwatts.
A value of -113 indicates that the signal strength is -113 dBm or
less, while a value of -51 indicates that the signal strength is -51
dBm or greater.
A value of 0 indicates that the signal strength is not known or not
detectable."
::= { tmnxCellularPortStatusEntry 8 }
tmnxCellPortRsrp OBJECT-TYPE
SYNTAX Integer32 (-140..-44 | 0)
UNITS "decibel-milliwatts"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxCellPortRsrp indicates the reference signal received
power, in decibel-milliwatts.
A value of -140 indicates that the received power is -140 dBm or less,
while a value of -44 indicates that the received power is -44 dBm or
greater.
A value of 0 indicates that the reference signal received power has
not been measured."
REFERENCE
"3GPP TS 36.133 version 14.3.0 Release 14, '3rd Generation
Partnership Project; Technical Specification Group Radio
Access Network; Evolved Universal Terrestrial Radio Access
(E-UTRA); Requirements for support of radio resource management',
3GPP, March 2017, Section 9.1.4 'RSRP Measurement Report Mapping'"
::= { tmnxCellularPortStatusEntry 9 }
tmnxCellPortRscp OBJECT-TYPE
SYNTAX Integer32 (-120..-25 | 0)
UNITS "decibel-milliwatts"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxCellPortRscp indicates the received signal code
power, in decibel-milliwatts.
A value of -120 indicates that the received power is -120 dBm or less,
while a value of -25 indicates that the received power is -25 dBm or
greater.
A value of 0 indicates that the received signal code power is not
known or not detectable."
REFERENCE
"3GPP TS 27.007 version 14.0.0 Release 14, '3rd Generation Partnership Project;
Technical Specification Group Core Network and Terminals; AT command
set for User Equipment (UE)', 3GPP, December 2016, Section 8.69,
'Extended signal quality +CESQ'"
::= { tmnxCellularPortStatusEntry 10 }
tmnxCellPortRsrq OBJECT-TYPE
SYNTAX Integer32 (-20..-3 | 0)
UNITS "decibel"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxCellPortRsrq indicates the reference signal received
quality, in decibel.
A value of -20 indicates that the received signal quality is
-20 dB or less, while a value of -3 indicates that the
received signal quality is -3 dB or greater.
A value of 0 indicates that the reference signal received quality has
not been measured."
REFERENCE
"3GPP TS 36.133 version 14.3.0 Release 14, '3rd Generation
Partnership Project; Technical Specification Group Radio
Access Network; Evolved Universal Terrestrial Radio Access
(E-UTRA); Requirements for support of radio resource management',
3GPP, March 2017, Section 9.1.7 'RSRQ Measurement Report Mapping'"
::= { tmnxCellularPortStatusEntry 11 }
tmnxCellPortSinr OBJECT-TYPE
SYNTAX Integer32 (-200..400)
UNITS "0.1 decibel"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxCellPortSinr indicates the signal to interface and
noise ratio, in tenths of decibel.
A value of -200 indicates that the signal to noise and interface
ratio is -20 dB or less, while a value of 400 indicates that the
signal to noise and interface ratio is 40 dB or greater."
::= { tmnxCellularPortStatusEntry 12 }
tmnxCellularSimCardStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF TmnxCellularSimCardStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The tmnxCellularSimCardStatusTable has an entry for each SIM card in
the system."
::= { tmnxCellularPortStatusObjs 3 }
tmnxCellularSimCardStatusEntry OBJECT-TYPE
SYNTAX TmnxCellularSimCardStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents a SIM card in the system. Entries
are automatically created by the system, and cannot be created or
deleted via SNMP SET operations."
AUGMENTS { tmnxCellularSimCardEntry }
::= { tmnxCellularSimCardStatusTable 1 }
TmnxCellularSimCardStatusEntry ::= SEQUENCE
{
tmnxCellSimCardEquipped TruthValue,
tmnxCellSimCardIccid TmnxCellularSimCardIccid,
tmnxCellSimCardImsi TmnxCellularImsi,
tmnxCellSimCardLocked TruthValue,
tmnxCellSimCardPinStatus INTEGER,
tmnxCellSimCardPinRetries Unsigned32,
tmnxCellSimCardPukRetries Unsigned32,
tmnxCellSimCardFirmwareVersion DisplayString
}
tmnxCellSimCardEquipped OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxCellSimCardEquipped indicates whether or not the SIM
card is installed in the system."
::= { tmnxCellularSimCardStatusEntry 1 }
tmnxCellSimCardIccid OBJECT-TYPE
SYNTAX TmnxCellularSimCardIccid
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxCellSimCardIccid indicates the International
Integrated Circuit Card Identifier assigned to this SIM card by the
manufacturer."
::= { tmnxCellularSimCardStatusEntry 2 }
tmnxCellSimCardImsi OBJECT-TYPE
SYNTAX TmnxCellularImsi
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxCellSimCardImsi indicates the International Mobile
Subscriber Identity (IMSI) assigned to the SIM card."
::= { tmnxCellularSimCardStatusEntry 3 }
tmnxCellSimCardLocked OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxCellSimCardLocked indicates whether the SIM card is
locked and requires a PIN."
::= { tmnxCellularSimCardStatusEntry 4 }
tmnxCellSimCardPinStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown (0),
waiting-for-pin (1),
waiting-for-puk (2),
ready (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxCellSimCardPinStatus indicates whether the SIM card
is waiting for a password, which could be either the PIN or the PIN
Unlock Key (PUK)."
REFERENCE
"3GPP TS 27.007 version 14.0.0 Release 14, '3rd Generation Partnership Project;
Technical Specification Group Core Network and Terminals; AT command
set for User Equipment (UE)', 3GPP, December 2016, Section 8.3,
'Enter PIN +CPIN'"
::= { tmnxCellularSimCardStatusEntry 5 }
tmnxCellSimCardPinRetries OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxCellSimCardPinRetries indicates the number of
remaining times the PIN can be attempted before the SIM card will be
locked and require a PIN Unlock Key (PUK) to unlock."
::= { tmnxCellularSimCardStatusEntry 6 }
tmnxCellSimCardPukRetries OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxCellSimCardPukRetries indicates the number of
remaining times the PIN Unlock Key (PUK) can be attempted before the
SIM card is rendered inoperational."
::= { tmnxCellularSimCardStatusEntry 7 }
tmnxCellSimCardFirmwareVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxCellSimCardFirmwareVersion indicates the firmware
version that the system will use on the cellular modem when this SIM
card is the active sim card.
If the user has not specified a version of firmware to use with a SIM
card, tmnxCellSimCardFirmwareVersion has a value of an empty string."
::= { tmnxCellularSimCardStatusEntry 8 }
tmnxCellularPdnStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF TmnxCellularPdnStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The tmnxCellularPdnStatusTable has an entry for each cellular Packet
Data Network in the system."
::= { tmnxCellularPortStatusObjs 4 }
tmnxCellularPdnStatusEntry OBJECT-TYPE
SYNTAX TmnxCellularPdnStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents a cellular PDN in the system. Entries
are automatically created by the system, and cannot be created or
deleted via SNMP SET operations."
AUGMENTS { tmnxCellularPdnEntry }
::= { tmnxCellularPdnStatusTable 1 }
TmnxCellularPdnStatusEntry ::= SEQUENCE
{
tmnxCellPdnConnectionState INTEGER,
tmnxCellPdnIpAddrType InetAddressType,
tmnxCellPdnIpAddress InetAddress,
tmnxCellPdnPrimaryDnsAddrType InetAddressType,
tmnxCellPdnPrimaryDnsAddress InetAddress,
tmnxCellPdnSecondaryDnsAddrType InetAddressType,
tmnxCellPdnSecondaryDnsAddress InetAddress,
tmnxCellPdnApn TmnxCellularAccessPointName,
tmnxCellPdnMtu Unsigned32
}
tmnxCellPdnConnectionState OBJECT-TYPE
SYNTAX INTEGER {
notConnected (0),
connected (1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxCellPdnConnectionState indicates whether or not the
packet data network connection has been successfully established."
::= { tmnxCellularPdnStatusEntry 1 }
tmnxCellPdnIpAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxCellPdnIpAddrType indicates, along with
tmnxCellPdnIpAddress, the IP address assigned to the PDN by the
cellular network."
::= { tmnxCellularPdnStatusEntry 2 }
tmnxCellPdnIpAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxCellPdnIpAddress indicates, along with
tmnxCellPdnIpAddrType, the IP address assigned to the PDN by the
cellular network."
::= { tmnxCellularPdnStatusEntry 3 }
tmnxCellPdnPrimaryDnsAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxCellPdnPrimaryDnsAddrType indicates, along with
tmnxCellPdnPrimaryDnsAddress, the IP address assigned of the primary
DNS server in the PDN."
::= { tmnxCellularPdnStatusEntry 4 }
tmnxCellPdnPrimaryDnsAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxCellPdnPrimaryDnsAddress indicates, along with
tmnxCellPdnPrimaryDnsAddrType, the IP address assigned of the primary
DNS server in the PDN."
::= { tmnxCellularPdnStatusEntry 5 }
tmnxCellPdnSecondaryDnsAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxCellPdnSecondaryDnsAddrType indicates, along with
tmnxCellPdnSecondaryDnsAddress, the IP address assigned of the
secondary DNS server in the PDN."
::= { tmnxCellularPdnStatusEntry 6 }
tmnxCellPdnSecondaryDnsAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxCellPdnSecondaryDnsAddress indicates, along with
tmnxCellPdnSecondaryDnsAddrType, the IP address assigned of the
secondary DNS server in the PDN."
::= { tmnxCellularPdnStatusEntry 7 }
tmnxCellPdnApn OBJECT-TYPE
SYNTAX TmnxCellularAccessPointName
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxCellPdnApn indicates the APN in use by the PDN."
::= { tmnxCellularPdnStatusEntry 8 }
tmnxCellPdnMtu OBJECT-TYPE
SYNTAX Unsigned32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxCellPdnMtu indicates the operational value of the IP
MTU on this PDN."
::= { tmnxCellularPdnStatusEntry 9 }
tmnxCellularPortBearerTable OBJECT-TYPE
SYNTAX SEQUENCE OF TmnxCellularPortBearerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The tmnxCellularPortBearerTable has an entry for each bearer created
on a cellular port in the system."
::= { tmnxCellularPortStatusObjs 5 }
tmnxCellularPortBearerEntry OBJECT-TYPE
SYNTAX TmnxCellularPortBearerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents a bearer created on a cellular port in the system.
Entries are automatically created and deleted by the system as the cellular
network creates and deletes bearers on the cellular port. Entries cannot be
created or deleted via SNMP SET operations."
INDEX {
tmnxPortPortID,
tmnxCellPortBearerId
}
::= { tmnxCellularPortBearerTable 1 }
TmnxCellularPortBearerEntry ::= SEQUENCE
{
tmnxCellPortBearerId Unsigned32,
tmnxCellPortBearerType INTEGER,
tmnxCellPortBearerQci Unsigned32,
tmnxCellPortBearerUlGbr TmnxCellularBearerRate,
tmnxCellPortBearerUlMbr TmnxCellularBearerRate,
tmnxCellPortBearerDlGbr TmnxCellularBearerRate,
tmnxCellPortBearerDlMbr TmnxCellularBearerRate
}
tmnxCellPortBearerId OBJECT-TYPE
SYNTAX Unsigned32 (1..15)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxCellPortBearerId indicates the Evolved Packet System
(EPS) Bearer Id of this bearer."
REFERENCE
"3GPP TS 23.401 version 11.11.0 Release 11, '3rd Generation Partnership Project;
Technical Specification Group Core Services and System Aspects;
General Packet Radio Service (GPRS) enhancements for Evolved Universal
Terrestrial Radio Access Network (E-UTRAN) access', 3GPP, December 2014,
Section 5.2.1, 'EPS bearer identity'"
::= { tmnxCellularPortBearerEntry 1 }
tmnxCellPortBearerType OBJECT-TYPE
SYNTAX INTEGER {
default (1),
dedicated (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxCellPortBearerType indicates the type of this bearer."
::= { tmnxCellularPortBearerEntry 2 }
tmnxCellPortBearerQci OBJECT-TYPE
SYNTAX Unsigned32 (1..254)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxCellPortBearerQci indicates the Quality of Service
(QoS) Class Identifier of this bearer."
REFERENCE
"3GPP TS 23.401 version 11.11.0 Release 11, '3rd Generation Partnership Project;
Technical Specification Group Core Services and System Aspects;
General Packet Radio Service (GPRS) enhancements for Evolved Universal
Terrestrial Radio Access Network (E-UTRAN) access', 3GPP, December 2014,
Section 4.7.3, 'Bearer level QoS parameters'"
::= { tmnxCellularPortBearerEntry 3 }
tmnxCellPortBearerUlGbr OBJECT-TYPE
SYNTAX TmnxCellularBearerRate
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxCellPortBearerUlGbr indicates the Guaranteed Bit Rate
of the uplink for this bearer. For a non-GBR bearer,
tmnxCellPortBearerUlGbr has a value of zero."
::= { tmnxCellularPortBearerEntry 4 }
tmnxCellPortBearerUlMbr OBJECT-TYPE
SYNTAX TmnxCellularBearerRate
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxCellPortBearerUlMbr indicates the Maximum Bit Rate
of the uplink for this bearer. For a non-GBR bearer,
tmnxCellPortBearerUlMbr has a value of zero."
::= { tmnxCellularPortBearerEntry 5 }
tmnxCellPortBearerDlGbr OBJECT-TYPE
SYNTAX TmnxCellularBearerRate
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxCellPortBearerDlGbr indicates the Guaranteed Bit Rate
of the downlink for this bearer. For a non-GBR bearer,
tmnxCellPortBearerDlGbr has a value of zero."
::= { tmnxCellularPortBearerEntry 6 }
tmnxCellPortBearerDlMbr OBJECT-TYPE
SYNTAX TmnxCellularBearerRate
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxCellPortBearerDlMbr indicates the Maximum Bit Rate
of the downlink for this bearer. For a non-GBR bearer,
tmnxCellPortBearerDlMbr has a value of zero."
::= { tmnxCellularPortBearerEntry 7 }
tmnxCellularPortTftTable OBJECT-TYPE
SYNTAX SEQUENCE OF TmnxCellularPortTftEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The tmnxCellularPortTftTable contains information about the traffic
flow templates (TFTs) created on the cellular port."
::= { tmnxCellularPortStatusObjs 6 }
tmnxCellularPortTftEntry OBJECT-TYPE
SYNTAX TmnxCellularPortTftEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents a packet filter created on a specific bearer.
Entries are automatically created and deleted by the system as the cellular
network creates and deletes bearers on the cellular port. Entries cannot be
created or deleted via SNMP SET operations."
INDEX {
tmnxPortPortID,
tmnxCellPortBearerId,
tmnxCellPortTftPacketFilterId
}
::= { tmnxCellularPortTftTable 1 }
TmnxCellularPortTftEntry ::= SEQUENCE
{
tmnxCellPortTftPacketFilterId Unsigned32,
tmnxCellPortTftEvalPrecedence Unsigned32,
tmnxCellPortTftDirection INTEGER,
tmnxCellPortTftTos Unsigned32,
tmnxCellPortTftTosMask Unsigned32
}
tmnxCellPortTftPacketFilterId OBJECT-TYPE
SYNTAX Unsigned32 (0..16)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxCellPortTftPacketFilterId identifies a packet filter
on a particular bearer."
REFERENCE
"3GPP TS 27.007 version 11.8.0 Release 11, '3rd Generation Partnership Project;
Technical Specification Group Core Network and Terminals; AT command
set for User Equipment (UE)', 3GPP, September 2013, Section 10.1.25,
'Traffic flow template read dynamic parameters +CGTFTRDP'
3GPP TS 24.008 version 11.17.1 Release 11, '3rd Generation Partnership Project;
Technical Specification Group Core Network and Terminals;
Mobile radio interface Layer 3 specification;
Core network protocols; Stage 3', 3GPP, January 2018,
Section 10.5.6.12, 'Traffic Flow Template'"
::= { tmnxCellularPortTftEntry 1 }
tmnxCellPortTftEvalPrecedence OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxCellPortTftEvalPrecedence indicates the evaluation
precedence index of the packet filter."
REFERENCE
"3GPP TS 27.007 version 11.8.0 Release 11, '3rd Generation Partnership Project;
Technical Specification Group Core Network and Terminals; AT command
set for User Equipment (UE)', 3GPP, September 2013, Section 10.1.25,
'Traffic flow template read dynamic parameters +CGTFTRDP'
3GPP TS 23.060 version 11.12.0 Release 11, '3rd Generation Partnership Project;
Technical Specification Group Services and System Aspects; General
Packet Radio Service (GPRS); Service description; Stage 2', 3GPP, December 2014,
Section 9.3, 'Packet Routeing and Transfer Function'"
::= { tmnxCellularPortTftEntry 2 }
tmnxCellPortTftDirection OBJECT-TYPE
SYNTAX INTEGER {
pre-release-7 (0),
uplink (1),
downlink (2),
bidirectional (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxCellPortTftDirection indicates the direction to apply
this packet filter."
REFERENCE
"3GPP TS 27.007 version 11.8.0 Release 11, '3rd Generation Partnership Project;
Technical Specification Group Core Network and Terminals; AT command
set for User Equipment (UE)', 3GPP, September 2013, Section 10.1.25,
'Traffic flow template read dynamic parameters +CGTFTRDP'"
::= { tmnxCellularPortTftEntry 3 }
tmnxCellPortTftTos OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxCellPortTftTos indicates, along with
tmnxCellPortTftTosMask, the values of the IPv4 Type of Service (ToS)
that match this packet filter."
::= { tmnxCellularPortTftEntry 4 }
tmnxCellPortTftTosMask OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxCellPortTftTosMask indicates, along with
tmnxCellPortTftTos, the values of the IPv4 Type of Service (ToS) that
match this packet filter."
::= { tmnxCellularPortTftEntry 5 }
tmnxCellPortCbsdAuthStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF TmnxCellPortCbsdAuthStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The tmnxCellPortCbsdAuthStatsTable has an entry for each cellular port
in the system and pertains to CBSD authorization status and statistic
information."
::= { tmnxCellularPortStatusObjs 7 }
tmnxCellPortCbsdAuthStatsEntry OBJECT-TYPE
SYNTAX TmnxCellPortCbsdAuthStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents the CBSD authorization status and statistics
information for a cellular port in the system. Entries are
automatically created by the system, and cannot be created or deleted
via SNMP SET operations."
AUGMENTS { tmnxCellPortCbsdAuthCfgEntry }
::= { tmnxCellPortCbsdAuthStatsTable 1 }
TmnxCellPortCbsdAuthStatsEntry ::= SEQUENCE
{
tmnxCellPortCbsdAuthOperState TmnxEnabledDisabled,
tmnxCellPortCbsdAuthId DisplayString,
tmnxCellPortCbsdAuthGrantId DisplayString,
tmnxCellPortCbsdAuthFccId DisplayString,
tmnxCellPortCbsdAuthRegState INTEGER,
tmnxCellPortCbsdAuthGrantState INTEGER,
tmnxCellPortCbsdAuthGrantExpTime DateAndTime,
tmnxCellPortCbsdAuthTxExpTime DateAndTime,
tmnxCellPortCbsdAuthHeartbeatInt Unsigned32,
tmnxCellPortCbsdAuthChanType INTEGER,
tmnxCellPortCbsdAuthCurSasSvr INTEGER,
tmnxCellPortCbsdAuthCurSasSvrIpT InetAddressType,
tmnxCellPortCbsdAuthCurSasSvrIp InetAddress,
tmnxCellPortCbsdAuthRegRequest Unsigned32,
tmnxCellPortCbsdAuthRegRspSuc Unsigned32,
tmnxCellPortCbsdAuthRegRspFail Unsigned32,
tmnxCellPortCbsdAuthGrantRequest Unsigned32,
tmnxCellPortCbsdAuthGrantRspSuc Unsigned32,
tmnxCellPortCbsdAuthGrantRspFail Unsigned32,
tmnxCellPortCbsdAuthHrtbtRequest Unsigned32,
tmnxCellPortCbsdAuthHrtbtRspSuc Unsigned32,
tmnxCellPortCbsdAuthHrtbtRspFail Unsigned32
}
tmnxCellPortCbsdAuthOperState OBJECT-TYPE
SYNTAX TmnxEnabledDisabled
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxCellPortCbsdAuthOperState indicates the operational
state of the CBSD authorization for the cellular port."
::= { tmnxCellPortCbsdAuthStatsEntry 1 }
tmnxCellPortCbsdAuthId OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxCellPortCbsdAuthId indicates the CBSD authorization
identifier."
::= { tmnxCellPortCbsdAuthStatsEntry 2 }
tmnxCellPortCbsdAuthGrantId OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxCellPortCbsdAuthGrantId indicates the CBSD
authorization grant identifier."
::= { tmnxCellPortCbsdAuthStatsEntry 3 }
tmnxCellPortCbsdAuthFccId OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxCellPortCbsdAuthFccId indicates the CBSD
authorization Federal Communications Commission identifier."
::= { tmnxCellPortCbsdAuthStatsEntry 4 }
tmnxCellPortCbsdAuthRegState OBJECT-TYPE
SYNTAX INTEGER {
unregistered (0),
registered (1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxCellPortCbsdAuthRegState indicates the CBSD
authorization registration state."
::= { tmnxCellPortCbsdAuthStatsEntry 5 }
tmnxCellPortCbsdAuthGrantState OBJECT-TYPE
SYNTAX INTEGER {
idle (1),
granted (2),
authorized (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxCellPortCbsdAuthGrantState indicates the CBSD
authorization grant state."
::= { tmnxCellPortCbsdAuthStatsEntry 6 }
tmnxCellPortCbsdAuthGrantExpTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxCellPortCbsdAuthGrantExpTime indicates the CBSD
authorization time the grant will expire."
::= { tmnxCellPortCbsdAuthStatsEntry 7 }
tmnxCellPortCbsdAuthTxExpTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxCellPortCbsdAuthTxExpTime indicates the CBSD
authorization time the transmission will expire."
::= { tmnxCellPortCbsdAuthStatsEntry 8 }
tmnxCellPortCbsdAuthHeartbeatInt OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxCellPortCbsdAuthHeartbeatInt indicates the CBSD
authorization heartbeat interval."
::= { tmnxCellPortCbsdAuthStatsEntry 9 }
tmnxCellPortCbsdAuthChanType OBJECT-TYPE
SYNTAX INTEGER {
gaa (1),
pal (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxCellPortCbsdAuthChanType indicates the CBSD
authorization channel type."
::= { tmnxCellPortCbsdAuthStatsEntry 10 }
tmnxCellPortCbsdAuthCurSasSvr OBJECT-TYPE
SYNTAX INTEGER {
none (0),
primary (1),
secondary (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxCellPortCbsdAuthCurSasSvr indicates the CBSD
authorization SAS server that is currently being used."
::= { tmnxCellPortCbsdAuthStatsEntry 11 }
tmnxCellPortCbsdAuthCurSasSvrIpT OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxCellPortCbsdAuthCurSasSvrIpT indicates the IP address
type of the current SAS server being used in CBSD authorization ."
::= { tmnxCellPortCbsdAuthStatsEntry 12 }
tmnxCellPortCbsdAuthCurSasSvrIp OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxCellPortCbsdAuthCurSasSvrIp indicates the IP address
of the current SAS server being used in CBSD authorization ."
::= { tmnxCellPortCbsdAuthStatsEntry 13 }
tmnxCellPortCbsdAuthRegRequest OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxCellPortCbsdAuthRegRequest indicates the number of
CBSD authorization registration requests attempted."
::= { tmnxCellPortCbsdAuthStatsEntry 14 }
tmnxCellPortCbsdAuthRegRspSuc OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxCellPortCbsdAuthRegRspSuc indicates the number of
successful CBSD authorization registration responses."
::= { tmnxCellPortCbsdAuthStatsEntry 15 }
tmnxCellPortCbsdAuthRegRspFail OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxCellPortCbsdAuthRegRspFail indicates the number of
failed CBSD authorization registration responses."
::= { tmnxCellPortCbsdAuthStatsEntry 16 }
tmnxCellPortCbsdAuthGrantRequest OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxCellPortCbsdAuthGrantRequest indicates the number of
CBSD authorization grant requests attempted."
::= { tmnxCellPortCbsdAuthStatsEntry 17 }
tmnxCellPortCbsdAuthGrantRspSuc OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxCellPortCbsdAuthGrantRspSuc indicates the number of
successful CBSD authorization grant responses."
::= { tmnxCellPortCbsdAuthStatsEntry 18 }
tmnxCellPortCbsdAuthGrantRspFail OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxCellPortCbsdAuthGrantRspFail indicates the number of
failed CBSD authorization grant responses."
::= { tmnxCellPortCbsdAuthStatsEntry 19 }
tmnxCellPortCbsdAuthHrtbtRequest OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxCellPortCbsdAuthHrtbtRequest indicates the number of
CBSD authorization heartbeat requests."
::= { tmnxCellPortCbsdAuthStatsEntry 20 }
tmnxCellPortCbsdAuthHrtbtRspSuc OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxCellPortCbsdAuthHrtbtRspSuc indicates the number of
successful CBSD authorization heartbeat responses."
::= { tmnxCellPortCbsdAuthStatsEntry 21 }
tmnxCellPortCbsdAuthHrtbtRspFail OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of tmnxCellPortCbsdAuthHrtbtRspFail indicates the number of
failed CBSD authorization heartbeat responses."
::= { tmnxCellPortCbsdAuthStatsEntry 22 }
tmnxCellularNotifyObjects OBJECT IDENTIFIER ::= { tmnxCellularObjs 4 }
tmnxCellularNotifyPdnId OBJECT-TYPE
SYNTAX TmnxCellularPdnId
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of tmnxCellularNotifyPdnId indicates the PDN for the
notification."
::= { tmnxCellularNotifyObjects 1 }
tmnxCellMdaNoServiceResetReason OBJECT-TYPE
SYNTAX INTEGER {
cellular-port-down (1),
no-bgp-neighbor (2)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of tmnxCellMdaNoServiceResetReason indicates the specific
reason why the system reset due to failure to establish service over
the cellular interface."
::= { tmnxCellularNotifyObjects 2 }
tmnxCellCbsdAuthFailReason OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..100))
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of tmnxCellCbsdAuthFailReason indicates the specific reason
why CBSD authorization request failed."
::= { tmnxCellularNotifyObjects 3 }
tmnxCellCbsdAuthRespCode OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..100))
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of tmnxCellCbsdAuthRespCode indicates the CBSD authorization
response code."
::= { tmnxCellularNotifyObjects 4 }
tmnxCellCbsdAuthPrevTransState OBJECT-TYPE
SYNTAX INTEGER {
idle (1),
authorized (2),
granted (3)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of tmnxCellCbsdAuthPrevTransState indicates the previous
state when transitioning states during the CBSD authorization process."
::= { tmnxCellularNotifyObjects 5 }
tmnxCellCbsdAuthNewTransState OBJECT-TYPE
SYNTAX INTEGER {
idle (1),
authorized (2),
granted (3)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of tmnxCellCbsdAuthNewTransState indicates the new state
when transitioning states during the CBSD authorization process."
::= { tmnxCellularNotifyObjects 6 }
tmnxCellularConformance OBJECT IDENTIFIER ::= { tmnxSRConfs 109 }
tmnxCellularCompliances OBJECT IDENTIFIER ::= { tmnxCellularConformance 1 }
tmnxCellularCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for the management of the cellular
feature-set for Release 15.0 on Nokia SROS series systems."
MODULE
MANDATORY-GROUPS {
tmnxCellularConfigGroup,
tmnxCellularStatusGroup
}
::= { tmnxCellularCompliances 1 }
tmnxCellularComplianceV16v0 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for the management of the cellular
feature-set for Release 16.0 on Nokia SROS series systems."
MODULE
MANDATORY-GROUPS {
tmnxCellularV16v0ConfigGroup,
tmnxCellularV16v0StatusGroup,
tmnxCellNotificationV16v0Group
}
::= { tmnxCellularCompliances 2 }
tmnxCellularComplianceV19 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for the management of the cellular
feature-set for Release 19 on Nokia SROS series systems."
MODULE
MANDATORY-GROUPS {
tmnxCellularV19ConfigGroup
}
::= { tmnxCellularCompliances 3 }
tmnxCellularComplianceV20 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for the management of the cellular
feature-set for Release 20 on Nokia SROS series systems."
MODULE
MANDATORY-GROUPS {
tmnxCellularV20ConfigGroup
}
::= { tmnxCellularCompliances 4 }
tmnxCellularComplianceV21 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for the management of the cellular
feature-set for Release 21 on Nokia SROS series systems."
MODULE
MANDATORY-GROUPS {
tmnxCellPortCbsdAuthGroupV21,
tmnxCellularNotifyObjsGroupV21,
tmnxCellNotificationGroupV21,
tmnxCellularStatusGroupV21,
tmnxCellularConfigGroupV21
}
::= { tmnxCellularCompliances 5 }
tmnxCellularGroups OBJECT IDENTIFIER ::= { tmnxCellularConformance 2 }
tmnxCellularV15v0Groups OBJECT IDENTIFIER ::= { tmnxCellularGroups 1 }
tmnxCellularConfigGroup OBJECT-GROUP
OBJECTS {
tmnxCellPdnProfileTblLastChanged,
tmnxCellPdnProfRowStatus,
tmnxCellPdnProfLastChanged,
tmnxCellPdnProfDescription,
tmnxCellPdnProfApn,
tmnxCellPdnProfAuthType,
tmnxCellPdnProfUsername,
tmnxCellPdnProfPassword,
tmnxCellSimCardTableLastChanged,
tmnxCellSimCardLastChanged,
tmnxCellSimCardDescription,
tmnxCellSimCardPin,
tmnxCellPdnTblLastChanged,
tmnxCellPdnRowStatus,
tmnxCellPdnLastChanged,
tmnxCellPdnProfile,
tmnxCellPortTblLastChanged,
tmnxCellPortLastChanged,
tmnxCellPortBand125MaxPowerLevel
}
STATUS current
DESCRIPTION
"The group of objects maintaining cellular port configuration on Nokia
SROS series systems. This group was introduced in Release 15.0."
::= { tmnxCellularV15v0Groups 1 }
tmnxCellularStatusGroup OBJECT-GROUP
OBJECTS {
tmnxCellPortImei,
tmnxCellPortRegistrationStatus,
tmnxCellPortWirelessTechnology,
tmnxCellPortFrequencyBand,
tmnxCellPortChannelNumber,
tmnxCellPortAreaCode,
tmnxCellPortCellIdentity,
tmnxCellPortRssi,
tmnxCellPortRsrp,
tmnxCellPortRscp,
tmnxCellSimCardEquipped,
tmnxCellSimCardIccid,
tmnxCellSimCardImsi,
tmnxCellSimCardLocked,
tmnxCellSimCardPinStatus,
tmnxCellSimCardPinRetries,
tmnxCellSimCardPukRetries,
tmnxCellPdnConnectionState,
tmnxCellPdnIpAddrType,
tmnxCellPdnIpAddress,
tmnxCellPdnPrimaryDnsAddrType,
tmnxCellPdnPrimaryDnsAddress,
tmnxCellPdnSecondaryDnsAddrType,
tmnxCellPdnSecondaryDnsAddress,
tmnxCellPdnApn,
tmnxCellPdnMtu
}
STATUS current
DESCRIPTION
"The group of objects maintaining cellular port status on Nokia
SROS series systems. This group was introduced in Release 15.0."
::= { tmnxCellularV15v0Groups 2 }
tmnxCellularV16v0Groups OBJECT IDENTIFIER ::= { tmnxCellularGroups 2 }
tmnxCellularV16v0ConfigGroup OBJECT-GROUP
OBJECTS {
tmnxCellMdaLastChanged,
tmnxCellMdaAdminActiveSim,
tmnxCellMdaDownResetInterval,
tmnxCellMdaDownResetCriteria,
tmnxCellMdaDownResetPending,
tmnxCellMdaDownResetTime,
tmnxCellSimCardFailureDuration,
tmnxCellSimCardPortStateSwitch,
tmnxCellSimCardBgpStateSwitch
}
STATUS current
DESCRIPTION
"The group of objects maintaining cellular port configuration on Nokia
SROS series systems, introduced in Release 16.0."
::= { tmnxCellularV16v0Groups 1 }
tmnxCellularV16v0StatusGroup OBJECT-GROUP
OBJECTS {
tmnxCellPortBearerId,
tmnxCellPortBearerType,
tmnxCellPortBearerQci,
tmnxCellPortBearerUlGbr,
tmnxCellPortBearerUlMbr,
tmnxCellPortBearerDlGbr,
tmnxCellPortBearerDlMbr,
tmnxCellPortTftPacketFilterId,
tmnxCellPortTftEvalPrecedence,
tmnxCellPortTftDirection,
tmnxCellPortTftTos,
tmnxCellPortTftTosMask,
tmnxCellSimCardFirmwareVersion,
tmnxCellMdaPreferredSim,
tmnxCellMdaOperActiveSim,
tmnxCellMdaSimCardSwitchPending,
tmnxCellMdaSimCardSwitchTime,
tmnxCellMdaSimCardLastSwitchTime,
tmnxCellMdaSimLastSwitchReason
}
STATUS current
DESCRIPTION
"The group of objects maintaining status of cellular ports on Nokia
SROS series systems, introduced in Release 16.0."
::= { tmnxCellularV16v0Groups 2 }
tmnxCellularNotifyObjsGroup OBJECT-GROUP
OBJECTS {
tmnxCellularNotifyPdnId,
tmnxCellMdaNoServiceResetReason
}
STATUS current
DESCRIPTION
"The group of objects used in notifications generated on cellular ports
on Nokia SROS series systems. This group was introduced in Release 16.0."
::= { tmnxCellularV16v0Groups 3 }
tmnxCellNotificationV16v0Group NOTIFICATION-GROUP
NOTIFICATIONS {
tmnxCellularBearerCreated,
tmnxCellularBearerDeleted,
tmnxCellularBearerModified,
tmnxCellularNoServiceReset,
tmnxCellularActiveSimChange
}
STATUS current
DESCRIPTION
"The group of notifications for cellular ports on Nokia SROS series
systems, introduced in Release 16.0."
::= { tmnxCellularV16v0Groups 4 }
tmnxCellularV19Groups OBJECT IDENTIFIER ::= { tmnxCellularGroups 3 }
tmnxCellularV19ConfigGroup OBJECT-GROUP
OBJECTS {
tmnxCellPdnProfProtocol
}
STATUS current
DESCRIPTION
"The group of objects maintaining cellular port configuration on Nokia
SROS series systems, introduced in Release 19."
::= { tmnxCellularV19Groups 1 }
tmnxCellularV20Groups OBJECT IDENTIFIER ::= { tmnxCellularGroups 4 }
tmnxCellularV20ConfigGroup OBJECT-GROUP
OBJECTS {
tmnxCellMdaSpecFirmwareVersion,
tmnxCellMdaMaxTxPower
}
STATUS current
DESCRIPTION
"The group of objects maintaining cellular port configuration and
status on Nokia SROS series systems, introduced in Release 20."
::= { tmnxCellularV20Groups 1 }
tmnxCellularV21Groups OBJECT IDENTIFIER ::= { tmnxCellularGroups 5 }
tmnxCellPortCbsdAuthGroupV21 OBJECT-GROUP
OBJECTS {
tmnxCellPortCbsdAuthCfgTblLstChg,
tmnxCellPortCbsdAuthCfgLstChange,
tmnxCellPortCbsdAuthAdminState,
tmnxCellPortCbsdAuthUserId,
tmnxCellPortCbsdAuthAntennaGain,
tmnxCellPortCbsdAuthClntTlsProf,
tmnxCellPortCbsdAuthPriSasSvrUrl,
tmnxCellPortCbsdAuthSecSasSvrUrl,
tmnxCellPortCbsdAuthOperState,
tmnxCellPortCbsdAuthCategory,
tmnxCellPortCbsdAuthId,
tmnxCellPortCbsdAuthGrantId,
tmnxCellPortCbsdAuthFccId,
tmnxCellPortCbsdAuthRegState,
tmnxCellPortCbsdAuthGrantState,
tmnxCellPortCbsdAuthGrantExpTime,
tmnxCellPortCbsdAuthTxExpTime,
tmnxCellPortCbsdAuthHeartbeatInt,
tmnxCellPortCbsdAuthChanType,
tmnxCellPortCbsdAuthCurSasSvr,
tmnxCellPortCbsdAuthCurSasSvrIp,
tmnxCellPortCbsdAuthCurSasSvrIpT,
tmnxCellPortCbsdAuthRegRequest,
tmnxCellPortCbsdAuthRegRspSuc,
tmnxCellPortCbsdAuthRegRspFail,
tmnxCellPortCbsdAuthGrantRequest,
tmnxCellPortCbsdAuthGrantRspSuc,
tmnxCellPortCbsdAuthGrantRspFail,
tmnxCellPortCbsdAuthHrtbtRequest,
tmnxCellPortCbsdAuthHrtbtRspSuc,
tmnxCellPortCbsdAuthHrtbtRspFail
}
STATUS current
DESCRIPTION
"The group of objects maintaining cellular port CBSD authorization
capabilities on Nokia SROS series systems, introduced in release 21."
::= { tmnxCellularV21Groups 1 }
tmnxCellularNotifyObjsGroupV21 OBJECT-GROUP
OBJECTS {
tmnxCellCbsdAuthFailReason,
tmnxCellCbsdAuthRespCode,
tmnxCellCbsdAuthPrevTransState,
tmnxCellCbsdAuthNewTransState
}
STATUS current
DESCRIPTION
"The group of objects used in notifications generated on cellular ports
Nokia SROS series systems, introduced in release 21."
::= { tmnxCellularV21Groups 2 }
tmnxCellNotificationGroupV21 NOTIFICATION-GROUP
NOTIFICATIONS {
tmnxCellPortCbsdRegistered,
tmnxCellPortCbsdUnregistered,
tmnxCellPortCbsdGranted,
tmnxCellPortCbsdAuthorized,
tmnxCellPortCbsdTransDown
}
STATUS current
DESCRIPTION
"The group of notifications for cellular ports on Nokia SROS series
systems, introduced in release 21."
::= { tmnxCellularV21Groups 3 }
tmnxCellularStatusGroupV21 OBJECT-GROUP
OBJECTS {
tmnxCellPortRsrq,
tmnxCellPortSinr
}
STATUS current
DESCRIPTION
"The group of objects maintaining cellular port status on Nokia SROS
series systems, introduced in release 21."
::= { tmnxCellularV21Groups 4 }
tmnxCellularConfigGroupV21 OBJECT-GROUP
OBJECTS {
tmnxCellPortSyncSysTime
}
STATUS current
DESCRIPTION
"The group of objects maintaining cellular port configuration on Nokia
SROS series systems, introduced in release 21."
::= { tmnxCellularV21Groups 5 }
tmnxCellularNotifyPrefix OBJECT IDENTIFIER ::= { tmnxSRNotifyPrefix 109 }
tmnxCellularNotifications OBJECT IDENTIFIER ::= { tmnxCellularNotifyPrefix 0 }
tmnxCellularBearerCreated NOTIFICATION-TYPE
OBJECTS {
tmnxCellularNotifyPdnId,
tmnxCellPortBearerId
}
STATUS current
DESCRIPTION
"The tmnxCellularBearerCreated notification is generated when the
network creates a dedicated bearer on a cellular port."
::= { tmnxCellularNotifications 1 }
tmnxCellularBearerDeleted NOTIFICATION-TYPE
OBJECTS {
tmnxCellularNotifyPdnId,
tmnxCellPortBearerId
}
STATUS current
DESCRIPTION
"The tmnxCellularBearerDeleted notification is generated when the
network removes a dedicated bearer on a cellular port."
::= { tmnxCellularNotifications 2 }
tmnxCellularBearerModified NOTIFICATION-TYPE
OBJECTS {
tmnxCellularNotifyPdnId,
tmnxCellPortBearerId
}
STATUS current
DESCRIPTION
"The tmnxCellularBearerModified notification is generated when the
network modifies a bearer on a cellular port."
::= { tmnxCellularNotifications 3 }
tmnxCellularNoServiceReset NOTIFICATION-TYPE
OBJECTS {
tmnxPortNotifyPortId,
tmnxCellMdaNoServiceResetReason
}
STATUS current
DESCRIPTION
"The tmnxCellularNoServiceReset notification is generated before the
system resets because it could not establish service over the cellular
interface."
::= { tmnxCellularNotifications 4 }
tmnxCellularActiveSimChange NOTIFICATION-TYPE
OBJECTS {
tmnxCellMdaAdminActiveSim,
tmnxCellMdaOperActiveSim,
tmnxCellMdaSimLastSwitchReason
}
STATUS current
DESCRIPTION
"The tmnxCellularActiveSimChange notification is generated when the
active SIM card on the cellular MDA changes."
::= { tmnxCellularNotifications 5 }
tmnxCellPortCbsdRegistered NOTIFICATION-TYPE
OBJECTS {
tmnxCellPortCbsdAuthId,
tmnxCellPortCbsdAuthCurSasSvrIp,
tmnxCellPortCbsdAuthCurSasSvrIpT
}
STATUS current
DESCRIPTION
"[CAUSE] The tmnxCellPortCbsdRegistered notification is generated when
the CBSD successfully registers with the SAS.
[EFFECT] After this notification is generated the CBSD continues the
CBSD authorization procedures.
[RECOVERY] Not applicable."
::= { tmnxCellularNotifications 6 }
tmnxCellPortCbsdUnregistered NOTIFICATION-TYPE
OBJECTS {
tmnxCellPortCbsdAuthId,
tmnxCellCbsdAuthFailReason,
tmnxCellCbsdAuthRespCode
}
STATUS current
DESCRIPTION
"[CAUSE] The tmnxCellPortCbsdUnregistered notification is generated
when the CBSD is declared unregistered with the SAS.
[EFFECT] The CBSD restarts the registration procedures with the SAS.
[RECOVERY] Not applicable."
::= { tmnxCellularNotifications 7 }
tmnxCellPortCbsdGranted NOTIFICATION-TYPE
OBJECTS {
tmnxCellPortCbsdAuthId,
tmnxCellPortCbsdAuthGrantId,
tmnxCellPortCbsdAuthGrantExpTime,
tmnxCellPortCbsdAuthHeartbeatInt
}
STATUS current
DESCRIPTION
"[CAUSE] The tmnxCellPortCbsdGranted notification is generated when the
CBSD has received a grant Id from the SAS. The CBSD is not authorized
until after the authorized notification is generated.
[EFFECT] The CBSD is awaiting authorization from the SAS.
[RECOVERY] Not applicable."
::= { tmnxCellularNotifications 8 }
tmnxCellPortCbsdAuthorized NOTIFICATION-TYPE
OBJECTS {
tmnxCellPortCbsdAuthId,
tmnxCellPortCbsdAuthGrantId,
tmnxCellPortCbsdAuthGrantExpTime,
tmnxCellPortCbsdAuthHeartbeatInt
}
STATUS current
DESCRIPTION
"[CAUSE] The tmnxCellPortCbsdAuthorized notification is generated when
the CBSD is authorized by the SAS.
[EFFECT] The CBSD enables SR-OS on the cellular interface.
[RECOVERY] Not applicable."
::= { tmnxCellularNotifications 9 }
tmnxCellPortCbsdTransDown NOTIFICATION-TYPE
OBJECTS {
tmnxCellPortCbsdAuthId,
tmnxCellPortCbsdAuthGrantId,
tmnxCellCbsdAuthPrevTransState,
tmnxCellCbsdAuthNewTransState,
tmnxCellCbsdAuthFailReason,
tmnxCellCbsdAuthRespCode
}
STATUS current
DESCRIPTION
"[CAUSE] The tmnxCellPortCbsdTransDown notification is generated when
the CBSD is transitioning to a lower state.
[EFFECT] The CBSD proceeds to complete authorization with the SAS from
the state the CBSD has transitioned to.
[RECOVERY] Not applicable."
::= { tmnxCellularNotifications 10 }
END