580 lines
25 KiB
Plaintext
580 lines
25 KiB
Plaintext
|
ALCATEL-IND1-AUTO-FABRIC-MIB DEFINITIONS ::= BEGIN
|
||
|
|
|
||
|
|
IMPORTS
|
||
|
|
Counter32, Unsigned32, MODULE-IDENTITY, OBJECT-IDENTITY,
|
||
|
|
NOTIFICATION-TYPE, OBJECT-TYPE
|
||
|
|
FROM SNMPv2-SMI
|
||
|
|
InterfaceIndex FROM IF-MIB
|
||
|
|
MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
|
||
|
|
FROM SNMPv2-CONF
|
||
|
|
SnmpAdminString FROM SNMP-FRAMEWORK-MIB
|
||
|
|
softentIND1AutoFabric FROM ALCATEL-IND1-BASE;
|
||
|
|
|
||
|
|
|
||
|
|
alcatelIND1AUTOFABRICMIB MODULE-IDENTITY
|
||
|
|
LAST-UPDATED "201211260000Z"
|
||
|
|
ORGANIZATION "Alcatel - Architects Of An Internet World"
|
||
|
|
CONTACT-INFO
|
||
|
|
"Please consult with Customer Service to insure the most appropriate
|
||
|
|
version of this document is used with the products in question:
|
||
|
|
|
||
|
|
Alcatel Internetworking, Incorporated
|
||
|
|
(Division 1, Formerly XYLAN Corporation)
|
||
|
|
26801 West Agoura Road
|
||
|
|
Agoura Hills, CA 91301-5122
|
||
|
|
United States Of America
|
||
|
|
|
||
|
|
Telephone: North America +1 800 995 2696
|
||
|
|
Latin America +1 877 919 9526
|
||
|
|
Europe +31 23 556 0100
|
||
|
|
Asia +65 394 7933
|
||
|
|
All Other +1 818 878 4507
|
||
|
|
|
||
|
|
Electronic Mail: support@ind.alcatel.com
|
||
|
|
World Wide Web: http://www.ind.alcatel.com
|
||
|
|
File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs"
|
||
|
|
|
||
|
|
DESCRIPTION
|
||
|
|
"This module describes an authoritative enterprise-specific Simple
|
||
|
|
Network Management Protocol (SNMP) Management Information Base (MIB):
|
||
|
|
|
||
|
|
For the Birds Of Prey Product Line
|
||
|
|
AUTOFABRIC for automatic detection and configuration of LACP, SPB and MVRP.
|
||
|
|
|
||
|
|
|
||
|
|
The right to make changes in specification and other information
|
||
|
|
contained in this document without prior notice is reserved.
|
||
|
|
|
||
|
|
No liability shall be assumed for any incidental, indirect, special, or
|
||
|
|
consequential damages whatsoever arising from or related to this
|
||
|
|
document or the information contained herein.
|
||
|
|
|
||
|
|
Vendors, end-users, and other interested parties are granted
|
||
|
|
non-exclusive license to use this specification in connection with
|
||
|
|
management of the products for which it is intended to be used.
|
||
|
|
|
||
|
|
Copyright (C) 1995-2002 Alcatel Internetworking, Incorporated
|
||
|
|
ALL RIGHTS RESERVED WORLDWIDE"
|
||
|
|
|
||
|
|
REVISION "201211250000Z"
|
||
|
|
DESCRIPTION
|
||
|
|
"The AUTOFABRIC MIB defines a set of AUTOFABRIC related management objects for ports
|
||
|
|
that support Autofabric feature. AUTOFABRIC as a
|
||
|
|
feature provides mechanisms to automatically detect and configure LACP aggregates, SPB adjacencies
|
||
|
|
and enables MVRP for automatically learning VLANs advertised by other switches
|
||
|
|
|
||
|
|
This MIB comprises proprietary managed objects as well the objects required
|
||
|
|
for conforming to the feature."
|
||
|
|
::= { softentIND1AutoFabric 1}
|
||
|
|
|
||
|
|
-- --------------------------------------------------------------
|
||
|
|
|
||
|
|
alcatelIND1AUTOFABRICMIBNotifications OBJECT IDENTIFIER ::= { alcatelIND1AUTOFABRICMIB 0 }
|
||
|
|
|
||
|
|
alcatelIND1AUTOFABRICMIBObjects OBJECT-IDENTITY
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Branch For AUTO-FABRIC
|
||
|
|
Subsystem Managed Objects."
|
||
|
|
::= { alcatelIND1AUTOFABRICMIB 1 }
|
||
|
|
|
||
|
|
alcatelIND1AUTOFABRICMIBConformance OBJECT-IDENTITY
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Branch for AUTOFABRIC Module MIB Subsystem Conformance Information."
|
||
|
|
::= { alcatelIND1AUTOFABRICMIB 2 }
|
||
|
|
|
||
|
|
alcatelIND1AUTOFABRICMIBGroups OBJECT-IDENTITY
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Branch for AUTOFABRIC Module MIB Subsystem Units of Conformance."
|
||
|
|
::= { alcatelIND1AUTOFABRICMIBConformance 1 }
|
||
|
|
|
||
|
|
alcatelIND1AUTOFABRICMIBCompliances OBJECT-IDENTITY
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Branch for AUTOFABRIC Module MIB Subsystem Compliance Statements."
|
||
|
|
::= { alcatelIND1AUTOFABRICMIBConformance 2 }
|
||
|
|
|
||
|
|
-- --------------------------------------------------------------
|
||
|
|
|
||
|
|
-- --------------------------------------------------------------
|
||
|
|
-- AUTO-FABRIC MIB
|
||
|
|
-- --------------------------------------------------------------
|
||
|
|
|
||
|
|
alaAutoFabricGlobalStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable(1),
|
||
|
|
disable(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This variable is used to enable or diable Autofabric on the switch.
|
||
|
|
The value enable (1) indicates that Autofabric should be enabled on
|
||
|
|
the switch. The value disable (2) is used to disable Autofabric on
|
||
|
|
the switch. By default, Autofabric is enabled on the switch."
|
||
|
|
DEFVAL { enable }
|
||
|
|
::= { alcatelIND1AUTOFABRICMIBObjects 1 }
|
||
|
|
|
||
|
|
alaAutoFabricGlobalDiscovery OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
default(1),
|
||
|
|
restart(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Defines the global discovery window control for Autofabric.
|
||
|
|
The value restart (2) indicates that Autofabric should restart
|
||
|
|
global discovery window.
|
||
|
|
By default, this object contains a zero value."
|
||
|
|
DEFVAL { default }
|
||
|
|
::= { alcatelIND1AUTOFABRICMIBObjects 2 }
|
||
|
|
|
||
|
|
|
||
|
|
alaAutoFabricGlobalLACPProtocolStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable(1),
|
||
|
|
disable(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This variable is used to enable or diable AutoFabric LACP discovery.
|
||
|
|
on the switch. The value enable (1) indicates that during discovery
|
||
|
|
the switch will attempt to create LACP link aggregates. The value
|
||
|
|
disable (2) indicates that there would be no attempt to create LACP
|
||
|
|
link aggregates during the discovery phase. By default LACP is enabled
|
||
|
|
on the switch"
|
||
|
|
DEFVAL { enable }
|
||
|
|
::= { alcatelIND1AUTOFABRICMIBObjects 3 }
|
||
|
|
|
||
|
|
|
||
|
|
alaAutoFabricGlobalSPBProtocolStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable(1),
|
||
|
|
disable(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This variable is used to enable or diable AutoFabric SPB discovery.
|
||
|
|
on the switch. The value enable (1) indicates that during discovery
|
||
|
|
the switch will attempt to create SPB adjacencies. The value
|
||
|
|
disable (2) indicates that there would be no attempt to create SPB
|
||
|
|
adjacencies during the discovery phase. By default SPB is enabled
|
||
|
|
on the switch"
|
||
|
|
DEFVAL { enable }
|
||
|
|
::= { alcatelIND1AUTOFABRICMIBObjects 4 }
|
||
|
|
|
||
|
|
|
||
|
|
alaAutoFabricGlobalMVRPProtocolStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable(1),
|
||
|
|
disable(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This variable is used to enable or diable AutoFabric MVRP discovery.
|
||
|
|
on the switch. The value enable (1) indicates that during discovery
|
||
|
|
the switch will enable MVRP and attempt to propagate and learn VLANs.
|
||
|
|
The value disable (2) indicates that MVRP would not be enabled in
|
||
|
|
discovery phase. By default MVRP is enabled on the switch"
|
||
|
|
DEFVAL { enable }
|
||
|
|
::= { alcatelIND1AUTOFABRICMIBObjects 5 }
|
||
|
|
|
||
|
|
|
||
|
|
alaAutoFabricGlobalConfigSaveTimer OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32 ( 60 .. 3600 )
|
||
|
|
UNITS "seconds"
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Maximum period of time after which configuration built up by AutoFabric
|
||
|
|
would get written to the boot.cfg or vcboot.cfg.
|
||
|
|
The range supported is 60-3600 seconds."
|
||
|
|
DEFVAL { 300 }
|
||
|
|
::= { alcatelIND1AUTOFABRICMIBObjects 6 }
|
||
|
|
|
||
|
|
|
||
|
|
alaAutoFabricGlobalConfigSaveTimerStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable(1),
|
||
|
|
disable(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This variable is used to enable or diable AutoFabric config save
|
||
|
|
timer on the switch. The value enable (1) indicates that
|
||
|
|
after the expiry of the config save timer, all AutoFabric
|
||
|
|
configurations would get written to the boot.cfg ot the vcboot.cfg
|
||
|
|
The value disable (2) would disable the config save timer.
|
||
|
|
By default it is enabled"
|
||
|
|
DEFVAL { enable }
|
||
|
|
::= { alcatelIND1AUTOFABRICMIBObjects 7 }
|
||
|
|
|
||
|
|
alaAutoFabricGlobalDiscoveryTimer OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32 ( 0 .. 3600 )
|
||
|
|
UNITS "Minutes"
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This variable is used to specify auto-fabric auto
|
||
|
|
discovery interval, zero disables it, configurable
|
||
|
|
Value is from 2 to 3600 minutes."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { alcatelIND1AUTOFABRICMIBObjects 8 }
|
||
|
|
|
||
|
|
alaAutoFabricRemoveGlobalConfig OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
default(1),
|
||
|
|
removeGlobalConfig(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS deprecated
|
||
|
|
DESCRIPTION
|
||
|
|
"This variable is used to remove the auto fabric global configuration when the user chooses to disable auto fabric"
|
||
|
|
DEFVAL { default }
|
||
|
|
::= { alcatelIND1AUTOFABRICMIBObjects 10 }
|
||
|
|
|
||
|
|
alaAutoFabricGlobalOSPFv2ProtocolStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable(1),
|
||
|
|
disable(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This variable is used to enable or disable auto configuration on the
|
||
|
|
OSPFv2 IP Protocol on the switch. "
|
||
|
|
DEFVAL { enable }
|
||
|
|
::= { alcatelIND1AUTOFABRICMIBObjects 11 }
|
||
|
|
|
||
|
|
alaAutoFabricGlobalOSPFv3ProtocolStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable(1),
|
||
|
|
disable(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This variable is used to enable or disable auto configuration on the
|
||
|
|
OSPFv3 IP Protocol on the switch. "
|
||
|
|
DEFVAL { enable }
|
||
|
|
::= { alcatelIND1AUTOFABRICMIBObjects 12 }
|
||
|
|
|
||
|
|
alaAutoFabricGlobalISISProtocolStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable(1),
|
||
|
|
disable(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This variable is used to enable or disable auto configuration on the
|
||
|
|
ISIS IP Protocol on the switch. "
|
||
|
|
DEFVAL { enable }
|
||
|
|
::= { alcatelIND1AUTOFABRICMIBObjects 13 }
|
||
|
|
|
||
|
|
alaAutoFabricSPBDefaultProfile OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
singleService(1),
|
||
|
|
autoVlan(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object specifies the default SAP profile used in the Omni switch.
|
||
|
|
|
||
|
|
singleService: defines single service SAP profiles.
|
||
|
|
autoVlan: AOS will generate SAP bindings for VLANS concerned automatically"
|
||
|
|
DEFVAL { autoVlan }
|
||
|
|
::= { alcatelIND1AUTOFABRICMIBObjects 14 }
|
||
|
|
|
||
|
|
alaAutoFabricLBDProtocolStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable(1),
|
||
|
|
disable(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This variable is used to enable or disable AutoFabric LBD on SAP port
|
||
|
|
on the switch. The value enable (1) indicates that during discovery
|
||
|
|
the switch will enable Loopback detection on UNP SAP port.
|
||
|
|
The value disable (2) indicates that Loobback detection will not be enabled
|
||
|
|
on UNP SAP port discovery"
|
||
|
|
DEFVAL { enable }
|
||
|
|
::= { alcatelIND1AUTOFABRICMIBObjects 15 }
|
||
|
|
|
||
|
|
alaAutoFabricRemoveVCReload OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
default(1),
|
||
|
|
removeVCReload(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This variable is applicable only for Standalone configuration.
|
||
|
|
It reloads the unit as a Standalone when the user chooses to disable auto fabric."
|
||
|
|
DEFVAL { default }
|
||
|
|
::= { alcatelIND1AUTOFABRICMIBObjects 17 }
|
||
|
|
|
||
|
|
-- -------------------------------------------------------------
|
||
|
|
-- AUTO-FABRIC Port Config Table
|
||
|
|
-- -------------------------------------------------------------
|
||
|
|
|
||
|
|
-- DESCRIPTION:
|
||
|
|
-- "Port configuration information
|
||
|
|
-- data for the AUTO-FABRIC Module.
|
||
|
|
-- Implementation of this group is mandantory"
|
||
|
|
|
||
|
|
|
||
|
|
alaAutoFabricPortConfig OBJECT IDENTIFIER ::= { alcatelIND1AUTOFABRICMIBObjects 9 }
|
||
|
|
|
||
|
|
|
||
|
|
alaAutoFabricPortConfigTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF AlaAutoFabricPortConfigEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A table containing Autofabric port configuration information."
|
||
|
|
::= { alaAutoFabricPortConfig 1 }
|
||
|
|
|
||
|
|
alaAutoFabricPortConfigEntry OBJECT-TYPE
|
||
|
|
SYNTAX AlaAutoFabricPortConfigEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An AutoFabric port configuration entry."
|
||
|
|
INDEX { alaAutoFabricPortConfigIfIndex }
|
||
|
|
::= { alaAutoFabricPortConfigTable 1 }
|
||
|
|
|
||
|
|
AlaAutoFabricPortConfigEntry ::= SEQUENCE {
|
||
|
|
alaAutoFabricPortConfigIfIndex InterfaceIndex,
|
||
|
|
alaAutoFabricPortConfigStatus INTEGER,
|
||
|
|
alaAutoFabricPortLACPProtocolStatus INTEGER,
|
||
|
|
alaAutoFabricPortSPBProtocolStatus INTEGER,
|
||
|
|
alaAutoFabricPortMVRPProtocolStatus INTEGER,
|
||
|
|
alaAutoFabricPortStatus INTEGER,
|
||
|
|
alaAutoFabricPortSPBDefaultProfile INTEGER
|
||
|
|
}
|
||
|
|
|
||
|
|
alaAutoFabricPortConfigIfIndex OBJECT-TYPE
|
||
|
|
SYNTAX InterfaceIndex
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The ifindex of the port on which AutoFabric is running"
|
||
|
|
::= { alaAutoFabricPortConfigEntry 1 }
|
||
|
|
|
||
|
|
alaAutoFabricPortConfigStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable(1),
|
||
|
|
disable(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This variable is used to enable or diable AutoFabric on the interface.
|
||
|
|
The value enable (1) indicates that AutoFabric should be enabled on
|
||
|
|
the interface. The value disable (2) is used to disable AutoFabric on
|
||
|
|
the interface. By default, AutoFabric is enabled on the interface."
|
||
|
|
DEFVAL { enable }
|
||
|
|
::= { alaAutoFabricPortConfigEntry 2 }
|
||
|
|
|
||
|
|
|
||
|
|
alaAutoFabricPortLACPProtocolStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable(1),
|
||
|
|
disable(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This variable is used to enable LACP in the AutoFabric discovery
|
||
|
|
on this port. The value enable (1) indicates during discovery window
|
||
|
|
this port will attempt to form LACP link aggregates. The value disable (2)
|
||
|
|
indicates this port will not participate in LACP discovery phase.
|
||
|
|
By default it is enabled"
|
||
|
|
DEFVAL { enable }
|
||
|
|
::= { alaAutoFabricPortConfigEntry 3 }
|
||
|
|
|
||
|
|
alaAutoFabricPortSPBProtocolStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable(1),
|
||
|
|
disable(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This variable is used to enable SPB in the AutoFabric discovery
|
||
|
|
on this port. The value enable (1) indicates during discovery window
|
||
|
|
this port will attempt to form SPB adjacencies. The value disable (2)
|
||
|
|
indicates this port will not participate in SPB discovery phase.
|
||
|
|
By default it is enabled"
|
||
|
|
DEFVAL { enable }
|
||
|
|
::= { alaAutoFabricPortConfigEntry 4 }
|
||
|
|
|
||
|
|
|
||
|
|
alaAutoFabricPortMVRPProtocolStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable(1),
|
||
|
|
disable(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This variable is used to enable MVRP in the AutoFabric discovery
|
||
|
|
on this port. The value enable (1) indicates during discovery window
|
||
|
|
this port will enable MVRP and attempt to learn and propagate VLANs.
|
||
|
|
The value disable (2) indicates this port will not participate in MVRP
|
||
|
|
discovery phase.
|
||
|
|
By default it is enabled"
|
||
|
|
DEFVAL { enable }
|
||
|
|
::= { alaAutoFabricPortConfigEntry 5 }
|
||
|
|
|
||
|
|
|
||
|
|
alaAutoFabricPortStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
disabled (1),
|
||
|
|
pending (2),
|
||
|
|
complete (3)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The state of the Autofabric discovery window on the port."
|
||
|
|
::= { alaAutoFabricPortConfigEntry 6 }
|
||
|
|
|
||
|
|
alaAutoFabricPortSPBDefaultProfile OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
singleService(1),
|
||
|
|
autoVlan(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object specifies the default SAP profile used on a particular port in the switch.
|
||
|
|
|
||
|
|
singleService: defines single service SAP profiles.
|
||
|
|
autoVlan: AOS will generate SAP bindings for VLANS concerned automatically."
|
||
|
|
DEFVAL { autoVlan }
|
||
|
|
::= { alaAutoFabricPortConfigEntry 7 }
|
||
|
|
|
||
|
|
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
|
||
|
|
|
||
|
|
alaAutoFabricTrapsObj OBJECT IDENTIFIER ::= { alcatelIND1AUTOFABRICMIBObjects 16 }
|
||
|
|
|
||
|
|
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
|
||
|
|
|
||
|
|
alaAutoFabricSTPMode OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
flatMode(1),
|
||
|
|
perVlan(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS accessible-for-notify
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the change in STP Mode, to Flat or 1X1, due to the change in Auto-Fabric admin-status."
|
||
|
|
::= { alaAutoFabricTrapsObj 1 }
|
||
|
|
|
||
|
|
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
|
||
|
|
-- Trap Description
|
||
|
|
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
|
||
|
|
|
||
|
|
alaAutoFabricSTPModeChangeAlert NOTIFICATION-TYPE
|
||
|
|
OBJECTS {
|
||
|
|
alaAutoFabricSTPMode
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This trap is sent when auto-fabric changes STP mode."
|
||
|
|
::= { alcatelIND1AUTOFABRICMIBNotifications 1 }
|
||
|
|
|
||
|
|
-- -------------------------------------------------------------
|
||
|
|
-- COMPLIANCE
|
||
|
|
-- -------------------------------------------------------------
|
||
|
|
alcatelIND1AUTOFABRICMIBCompliance MODULE-COMPLIANCE
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Compliance statement for AUTOFABRIC."
|
||
|
|
MODULE
|
||
|
|
MANDATORY-GROUPS
|
||
|
|
{
|
||
|
|
alaAutoFabricBaseGroup,
|
||
|
|
alaAutoFabricPortConfigGroup,
|
||
|
|
alaAutoFabricNotificationGroup,
|
||
|
|
alaAutoFabricTrapsObjGroup
|
||
|
|
}
|
||
|
|
::= { alcatelIND1AUTOFABRICMIBCompliances 1 }
|
||
|
|
|
||
|
|
-- -------------------------------------------------------------
|
||
|
|
-- UNITS OF CONFORMANCE
|
||
|
|
-- -------------------------------------------------------------
|
||
|
|
|
||
|
|
alaAutoFabricBaseGroup OBJECT-GROUP
|
||
|
|
OBJECTS
|
||
|
|
{
|
||
|
|
alaAutoFabricGlobalStatus,
|
||
|
|
alaAutoFabricGlobalDiscovery,
|
||
|
|
alaAutoFabricGlobalLACPProtocolStatus,
|
||
|
|
alaAutoFabricGlobalSPBProtocolStatus,
|
||
|
|
alaAutoFabricGlobalMVRPProtocolStatus,
|
||
|
|
alaAutoFabricGlobalConfigSaveTimer,
|
||
|
|
alaAutoFabricGlobalConfigSaveTimerStatus,
|
||
|
|
alaAutoFabricGlobalDiscoveryTimer,
|
||
|
|
alaAutoFabricRemoveGlobalConfig,
|
||
|
|
alaAutoFabricGlobalOSPFv2ProtocolStatus,
|
||
|
|
alaAutoFabricGlobalOSPFv3ProtocolStatus,
|
||
|
|
alaAutoFabricGlobalISISProtocolStatus,
|
||
|
|
alaAutoFabricSPBDefaultProfile,
|
||
|
|
alaAutoFabricLBDProtocolStatus,
|
||
|
|
alaAutoFabricRemoveVCReload
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Collection of objects for management of AutoFabric Base Group."
|
||
|
|
::= { alcatelIND1AUTOFABRICMIBGroups 1 }
|
||
|
|
|
||
|
|
alaAutoFabricPortConfigGroup OBJECT-GROUP
|
||
|
|
OBJECTS
|
||
|
|
{
|
||
|
|
alaAutoFabricPortConfigStatus,
|
||
|
|
alaAutoFabricPortLACPProtocolStatus,
|
||
|
|
alaAutoFabricPortSPBProtocolStatus,
|
||
|
|
alaAutoFabricPortMVRPProtocolStatus,
|
||
|
|
alaAutoFabricPortStatus,
|
||
|
|
alaAutoFabricPortSPBDefaultProfile
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Collection of objects for management of AutoFabric Port Configuration Table."
|
||
|
|
::= { alcatelIND1AUTOFABRICMIBGroups 2 }
|
||
|
|
|
||
|
|
alaAutoFabricNotificationGroup NOTIFICATION-GROUP
|
||
|
|
NOTIFICATIONS {
|
||
|
|
alaAutoFabricSTPModeChangeAlert
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Collection of notifications for Auto-Fabric."
|
||
|
|
::= { alcatelIND1AUTOFABRICMIBGroups 3 }
|
||
|
|
|
||
|
|
alaAutoFabricTrapsObjGroup OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
alaAutoFabricSTPMode
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Collection of notificating objects for Auto-Fabric."
|
||
|
|
::= { alcatelIND1AUTOFABRICMIBGroups 4 }
|
||
|
|
|
||
|
|
-- -------------------------------------------------------------
|
||
|
|
|
||
|
|
END
|
||
|
|
|