1702 lines
70 KiB
Plaintext
1702 lines
70 KiB
Plaintext
|
ALCATEL-IND1-CONFIG-MGR-MIB DEFINITIONS ::= BEGIN
|
||
|
|
|
||
|
|
|
||
|
|
IMPORTS
|
||
|
|
OBJECT-TYPE,
|
||
|
|
MODULE-IDENTITY,
|
||
|
|
OBJECT-IDENTITY,
|
||
|
|
Integer32 FROM SNMPv2-SMI
|
||
|
|
SnmpAdminString FROM SNMP-FRAMEWORK-MIB
|
||
|
|
MODULE-COMPLIANCE,
|
||
|
|
OBJECT-GROUP FROM SNMPv2-CONF
|
||
|
|
softentIND1Confmgr FROM ALCATEL-IND1-BASE
|
||
|
|
VirtualOperChassisId FROM ALCATEL-IND1-VIRTUAL-CHASSIS-MIB
|
||
|
|
;
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
alcatelIND1ConfigMgrMIB MODULE-IDENTITY
|
||
|
|
LAST-UPDATED "200704030000Z"
|
||
|
|
ORGANIZATION "Alcatel-Lucent"
|
||
|
|
CONTACT-INFO
|
||
|
|
"Please consult with Customer Service to ensure the most appropriate
|
||
|
|
version of this document is used with the products in question:
|
||
|
|
|
||
|
|
Alcatel-Lucent, Enterprise Solutions Division
|
||
|
|
(Formerly Alcatel Internetworking, Incorporated)
|
||
|
|
26801 West Agoura Road
|
||
|
|
Agoura Hills, CA 91301-5122
|
||
|
|
United States Of America
|
||
|
|
|
||
|
|
Telephone: North America +1 800 995 2696
|
||
|
|
Latin America +1 877 919 9526
|
||
|
|
Europe +31 23 556 0100
|
||
|
|
Asia +65 394 7933
|
||
|
|
All Other +1 818 878 4507
|
||
|
|
|
||
|
|
Electronic Mail: support@ind.alcatel.com
|
||
|
|
World Wide Web: http://alcatel-lucent.com/wps/portal/enterprise
|
||
|
|
File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs"
|
||
|
|
|
||
|
|
DESCRIPTION
|
||
|
|
"This module describes an authoritative enterprise-specific Simple
|
||
|
|
Network Management Protocol (SNMP) Management Information Base (MIB):
|
||
|
|
|
||
|
|
For the Birds Of Prey Product Line
|
||
|
|
Configuration Manager Subsystem.
|
||
|
|
|
||
|
|
The right to make changes in specification and other information
|
||
|
|
contained in this document without prior notice is reserved.
|
||
|
|
|
||
|
|
No liability shall be assumed for any incidental, indirect, special, or
|
||
|
|
consequential damages whatsoever arising from or related to this
|
||
|
|
document or the information contained herein.
|
||
|
|
|
||
|
|
Vendors, end-users, and other interested parties are granted
|
||
|
|
non-exclusive license to use this specification in connection with
|
||
|
|
management of the products for which it is intended to be used.
|
||
|
|
|
||
|
|
Copyright (C) 1995-2007 Alcatel-Lucent
|
||
|
|
ALL RIGHTS RESERVED WORLDWIDE"
|
||
|
|
|
||
|
|
REVISION "200704030000Z"
|
||
|
|
DESCRIPTION
|
||
|
|
"The latest version of this MIB Module."
|
||
|
|
|
||
|
|
::= { softentIND1Confmgr 1}
|
||
|
|
|
||
|
|
|
||
|
|
alcatelIND1ConfigMgrMIBObjects OBJECT-IDENTITY
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Branch For Configuration Manager Subsystem Managed Objects."
|
||
|
|
::= { alcatelIND1ConfigMgrMIB 1 }
|
||
|
|
|
||
|
|
|
||
|
|
alcatelIND1ConfigMgrMIBConformance OBJECT-IDENTITY
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Branch For Configuration Manager Subsystem Conformance Information."
|
||
|
|
::= { alcatelIND1ConfigMgrMIB 2 }
|
||
|
|
|
||
|
|
|
||
|
|
alcatelIND1ConfigMgrMIBGroups OBJECT-IDENTITY
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Branch For Configuration Manager Subsystem Units Of Conformance."
|
||
|
|
::= { alcatelIND1ConfigMgrMIBConformance 1 }
|
||
|
|
|
||
|
|
|
||
|
|
alcatelIND1ConfigMgrMIBCompliances OBJECT-IDENTITY
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Branch For Configuration Manager Subsystem Compliance Statements."
|
||
|
|
::= { alcatelIND1ConfigMgrMIBConformance 2 }
|
||
|
|
|
||
|
|
|
||
|
|
--
|
||
|
|
-- Configuration Manager
|
||
|
|
--
|
||
|
|
|
||
|
|
configManager OBJECT IDENTIFIER ::= { alcatelIND1ConfigMgrMIBObjects 1 }
|
||
|
|
|
||
|
|
|
||
|
|
configFileName OBJECT-TYPE
|
||
|
|
SYNTAX SnmpAdminString (SIZE (0..45))
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The name of the configuration file to be
|
||
|
|
read by the device. The file specified
|
||
|
|
should be present on the device."
|
||
|
|
DEFVAL { "" }
|
||
|
|
::= { configManager 1 }
|
||
|
|
|
||
|
|
|
||
|
|
configFileAction OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
none(1),
|
||
|
|
checkSyntaxOnly(2),
|
||
|
|
apply(3)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Triggers application of the configuration
|
||
|
|
file specified by the configInputFileName.
|
||
|
|
A value of checkSyntax causes configInputFile
|
||
|
|
to be checked for syntax, with no changes to
|
||
|
|
device configuration. A value of
|
||
|
|
checkSyntaxAndApply causes the configInputFile
|
||
|
|
to be applied to the device configuration.A value
|
||
|
|
of none indicates no action has been triggered."
|
||
|
|
DEFVAL { none }
|
||
|
|
::= { configManager 2 }
|
||
|
|
|
||
|
|
|
||
|
|
configErrorFileName OBJECT-TYPE
|
||
|
|
SYNTAX SnmpAdminString (SIZE (0..255))
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The name of the file containing the error
|
||
|
|
messages generated by the device during file
|
||
|
|
configuration."
|
||
|
|
DEFVAL { "" }
|
||
|
|
::= { configManager 3 }
|
||
|
|
|
||
|
|
|
||
|
|
configFileStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
noneAvail(1),
|
||
|
|
inProgress(2),
|
||
|
|
completeNoErrors(3),
|
||
|
|
completeErrors(4)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Status of most recent application of configuration
|
||
|
|
file to the device."
|
||
|
|
DEFVAL { noneAvail }
|
||
|
|
::= { configManager 4 }
|
||
|
|
|
||
|
|
|
||
|
|
configFileMode OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
none(1),
|
||
|
|
verbose(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The verbose mode displays all configuration commands
|
||
|
|
and errors when the file is applied on the console
|
||
|
|
screen. Ignored unless set from command line interface."
|
||
|
|
DEFVAL { none }
|
||
|
|
::= { configManager 5 }
|
||
|
|
|
||
|
|
|
||
|
|
configTimerFileName OBJECT-TYPE
|
||
|
|
SYNTAX SnmpAdminString (SIZE (0..45))
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The name of the configuration file to be read later
|
||
|
|
by the device."
|
||
|
|
DEFVAL { "" }
|
||
|
|
::= { configManager 6 }
|
||
|
|
|
||
|
|
|
||
|
|
configTimerFileTime OBJECT-TYPE
|
||
|
|
SYNTAX SnmpAdminString (SIZE (0..16))
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The local time when the configuration file
|
||
|
|
will be read by the device. This object is
|
||
|
|
only set if the configInputFile must be applied
|
||
|
|
at a later time.
|
||
|
|
The following formats are valid:
|
||
|
|
|
||
|
|
MM/DD/YYYY hh:mm
|
||
|
|
|
||
|
|
MM/DD/YY hh:mm
|
||
|
|
|
||
|
|
MM/DD hh:mm - uses current year if
|
||
|
|
after current date and time,
|
||
|
|
next year otherwise.
|
||
|
|
|
||
|
|
hh:mm - uses today's date if later
|
||
|
|
than current time,
|
||
|
|
tommorow's date otherwise.
|
||
|
|
where
|
||
|
|
YY - year (0-38,99)
|
||
|
|
MM - month (1-12)
|
||
|
|
DD - day (1-31)
|
||
|
|
hh - hour (0-23)
|
||
|
|
mm - minute (0-59)"
|
||
|
|
DEFVAL { "" }
|
||
|
|
::= { configManager 7 }
|
||
|
|
|
||
|
|
|
||
|
|
configTimerFileStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
idle(1),
|
||
|
|
pending(2),
|
||
|
|
inProgress(3)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The current status of the ASCII configuration
|
||
|
|
timer."
|
||
|
|
DEFVAL { idle }
|
||
|
|
::= { configManager 8 }
|
||
|
|
|
||
|
|
|
||
|
|
configTimerClear OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..1)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A set of this object causes the ASCII
|
||
|
|
configuration timer to be cleared."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { configManager 9 }
|
||
|
|
|
||
|
|
|
||
|
|
configSnapshotFileName OBJECT-TYPE
|
||
|
|
SYNTAX SnmpAdminString (SIZE (0..45))
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The name of the configuration snap-shot file
|
||
|
|
to be generated by the device."
|
||
|
|
DEFVAL { "" }
|
||
|
|
::= { configManager 10 }
|
||
|
|
|
||
|
|
|
||
|
|
configSnapshotAction OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..1)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A set of this object causes the configuration
|
||
|
|
snap-shot to be generated by the device."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { configManager 11 }
|
||
|
|
|
||
|
|
|
||
|
|
configSnapshotAllSelect OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..1)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A set of this object causes
|
||
|
|
all application configuration data to be
|
||
|
|
included in the snap-shot file generated by
|
||
|
|
the device."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { configManager 12 }
|
||
|
|
|
||
|
|
|
||
|
|
configSnapshotVlanSelect OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..1)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A set of this object causes
|
||
|
|
Vlan configuration data to be
|
||
|
|
included in the snap-shot file generated by
|
||
|
|
the device."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { configManager 13 }
|
||
|
|
|
||
|
|
|
||
|
|
configSnapshotSpanningTreeSelect OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..1)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A set of this object causes
|
||
|
|
Spanning Tree configuration data to be
|
||
|
|
included in the snap-shot file generated by
|
||
|
|
the device."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { configManager 14 }
|
||
|
|
|
||
|
|
|
||
|
|
configSnapshotQOSSelect OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..1)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A set of this object causes
|
||
|
|
QOS configuration data to be included
|
||
|
|
in the snap-shot file generated by the
|
||
|
|
the device."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { configManager 15 }
|
||
|
|
|
||
|
|
|
||
|
|
configSnapshotIPSelect OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..1)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A set of this object causes
|
||
|
|
IP configuration data to be included
|
||
|
|
in the snap-shot file generated by the
|
||
|
|
the device."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { configManager 16 }
|
||
|
|
|
||
|
|
|
||
|
|
configSnapshotIPXSelect OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..1)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A set of this object causes
|
||
|
|
IPX configuration data to be included
|
||
|
|
in the snap-shot file generated by the
|
||
|
|
the device."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { configManager 17 }
|
||
|
|
|
||
|
|
|
||
|
|
configSnapshotIPMSSelect OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..1)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A set of this object causes
|
||
|
|
IPMS configuration data to be included
|
||
|
|
in the snap-shot file generated by the
|
||
|
|
the device."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { configManager 18 }
|
||
|
|
|
||
|
|
configSnapshotAAASelect OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..1)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A set of this object causes
|
||
|
|
AAA configuration data to be included
|
||
|
|
in the snap-shot file generated by the
|
||
|
|
the device."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { configManager 19 }
|
||
|
|
|
||
|
|
|
||
|
|
configSnapshotSNMPSelect OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..1)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A set of this object causes
|
||
|
|
SNMP configuration data to be included
|
||
|
|
in the snap-shot file generated by the
|
||
|
|
the device."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { configManager 20 }
|
||
|
|
|
||
|
|
|
||
|
|
configSnapshot8021QSelect OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..1)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A set of this object causes
|
||
|
|
802.1Q configuration data to be included
|
||
|
|
in the snap-shot file generated by the
|
||
|
|
the device."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { configManager 21 }
|
||
|
|
|
||
|
|
|
||
|
|
configSnapshotLinkAggregateSelect OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..1)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A set of this object causes
|
||
|
|
link aggregation configuration data to
|
||
|
|
be included in the snap-shot file generated
|
||
|
|
by the device."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { configManager 22 }
|
||
|
|
|
||
|
|
|
||
|
|
configSnapshotPortMirrorSelect OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..1)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A set of this object causes
|
||
|
|
port mirroring configuration data to
|
||
|
|
be included in the snap-shot file generated
|
||
|
|
by the device."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { configManager 23 }
|
||
|
|
|
||
|
|
|
||
|
|
configSnapshotXIPSelect OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..1)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A set of this object causes
|
||
|
|
proprietary inter-switch protocol configuration
|
||
|
|
data to be included in the snap-shot file generated
|
||
|
|
by the device."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { configManager 24 }
|
||
|
|
|
||
|
|
|
||
|
|
configSnapshotHealthMonitorSelect OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..1)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A set of this object causes
|
||
|
|
health monitoring configuration data to
|
||
|
|
be included in the snap-shot file generated
|
||
|
|
by the device."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { configManager 25 }
|
||
|
|
|
||
|
|
|
||
|
|
configSnapshotBootPSelect OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..1)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A set of this object causes
|
||
|
|
bootp configuration data to
|
||
|
|
be included in the snap-shot file generated
|
||
|
|
by the device."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { configManager 26 }
|
||
|
|
|
||
|
|
|
||
|
|
configSnapshotBridgeSelect OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..1)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A set of this object causes
|
||
|
|
source-learning configuration data to
|
||
|
|
be included in the snap-shot file generated
|
||
|
|
by the device."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { configManager 27 }
|
||
|
|
|
||
|
|
|
||
|
|
configSnapshotChassisSelect OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..1)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A set of this object causes
|
||
|
|
the chassis configuration data to
|
||
|
|
be included in the snap-shot file generated
|
||
|
|
by the device."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { configManager 28 }
|
||
|
|
|
||
|
|
|
||
|
|
configSnapshotInterfaceSelect OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..1)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A set of this object causes
|
||
|
|
ethernet interface configuration data to
|
||
|
|
be included in the snap-shot file generated
|
||
|
|
by the device."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { configManager 29 }
|
||
|
|
|
||
|
|
|
||
|
|
configSnapshotPolicySelect OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..1)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A set of this object causes
|
||
|
|
policy manager configuration data to
|
||
|
|
be included in the snap-shot file generated
|
||
|
|
by the device."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { configManager 30 }
|
||
|
|
|
||
|
|
|
||
|
|
configSnapshotSessionSelect OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..1)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A set of this object causes
|
||
|
|
the user-session configuration data to
|
||
|
|
be included in the snap-shot file generated
|
||
|
|
by the device."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { configManager 31 }
|
||
|
|
|
||
|
|
|
||
|
|
configSnapshotServerLoadBalanceSelect OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..1)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A set of this object causes
|
||
|
|
server load balancing configuration data to
|
||
|
|
be included in the snap-shot file generated
|
||
|
|
by the device."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { configManager 32 }
|
||
|
|
|
||
|
|
|
||
|
|
configSnapshotSystemServiceSelect OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..1)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A set of this object causes
|
||
|
|
system services configuration data to
|
||
|
|
be included in the snap-shot file generated
|
||
|
|
by the device."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { configManager 33 }
|
||
|
|
|
||
|
|
|
||
|
|
configSnapshotVRRPSelect OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..1)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A set of this object causes
|
||
|
|
VRRP configuration data to
|
||
|
|
be included in the snap-shot file generated
|
||
|
|
by the device."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { configManager 34 }
|
||
|
|
|
||
|
|
|
||
|
|
configSnapshotWebSelect OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..1)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A set of this object causes
|
||
|
|
web manager configuration data to
|
||
|
|
be included in the snap-shot file generated
|
||
|
|
by the device."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { configManager 35 }
|
||
|
|
|
||
|
|
|
||
|
|
configSnapshotRIPSelect OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..1)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A set of this object causes
|
||
|
|
RIP configuration data to
|
||
|
|
be included in the snap-shot file generated
|
||
|
|
by the device."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { configManager 36 }
|
||
|
|
|
||
|
|
|
||
|
|
configSnapshotOSPFSelect OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..1)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A set of this object causes
|
||
|
|
OSPF configuration data to
|
||
|
|
be included in the snap-shot file generated
|
||
|
|
by the device."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { configManager 37 }
|
||
|
|
|
||
|
|
|
||
|
|
configSnapshotBGPSelect OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..1)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A set of this object causes
|
||
|
|
BGP configuration data to
|
||
|
|
be included in the snap-shot file generated
|
||
|
|
by the device."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { configManager 38 }
|
||
|
|
|
||
|
|
|
||
|
|
configSnapshotIPRMSelect OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..1)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A set of this object causes
|
||
|
|
IPRM routing configuration data to
|
||
|
|
be included in the snap-shot file generated
|
||
|
|
by the device."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { configManager 39 }
|
||
|
|
|
||
|
|
|
||
|
|
configSnapshotIPMRSelect OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..1)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A set of this object causes
|
||
|
|
IP multicast routing configuration data to
|
||
|
|
be included in the snap-shot file generated
|
||
|
|
by the device."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { configManager 40 }
|
||
|
|
|
||
|
|
|
||
|
|
configSnapshotModuleSelect OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..1)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A set of this object causes
|
||
|
|
module configuration data to
|
||
|
|
be included in the snap-shot file generated
|
||
|
|
by the device."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { configManager 41 }
|
||
|
|
|
||
|
|
configTechSupportLogAction OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
notSignificant(0),
|
||
|
|
techSupportBasic(1),
|
||
|
|
techSupportL2(2),
|
||
|
|
techSupportL3(3),
|
||
|
|
techSupportL3Rip(4),
|
||
|
|
techSupportL3Ipx(5),
|
||
|
|
techSupportL3Ospf(6),
|
||
|
|
techSupportL3Bgp(7),
|
||
|
|
techSupportL3Pimsm(8),
|
||
|
|
techSupportL3Mroute(9),
|
||
|
|
techSupportL3Dvmrp(10),
|
||
|
|
techSupportL3IPv6(11),
|
||
|
|
techSupportL3RIPng(12),
|
||
|
|
techSupportL3OSPF3(13),
|
||
|
|
techSupportL3Isis(14),
|
||
|
|
techSupportL3Pim6(15),
|
||
|
|
techSupportL3IPsec(16),
|
||
|
|
techSupportL3Bfd(17)
|
||
|
|
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A set of this object causes
|
||
|
|
a tech_support.log file to be created
|
||
|
|
containing switch information useful to
|
||
|
|
a technical support group."
|
||
|
|
DEFVAL { techSupportBasic }
|
||
|
|
::= { configManager 42 }
|
||
|
|
|
||
|
|
configWriteMemory OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..1)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A set of this object causes
|
||
|
|
the entire switch snap-shot configuration to
|
||
|
|
be stored in the boot.cfg file in the
|
||
|
|
current running directory."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { configManager 43 }
|
||
|
|
|
||
|
|
configErrorFileMaximum OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..25)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The maximum number of error files which may be
|
||
|
|
present on a switch. Each time a new error file
|
||
|
|
is created, all but the newest configErrorFileMaxNum
|
||
|
|
error files are deleted."
|
||
|
|
DEFVAL { 1 }
|
||
|
|
::= { configManager 44 }
|
||
|
|
|
||
|
|
configChangeStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
identical(1),
|
||
|
|
different(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The current state of the running configuration with respect
|
||
|
|
to the saved configuration."
|
||
|
|
DEFVAL { identical }
|
||
|
|
::= { configManager 45 }
|
||
|
|
|
||
|
|
configSnapshotRDPSelect OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..1)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A set of this object causes
|
||
|
|
RDP configuration data to
|
||
|
|
be included in the snap-shot file generated
|
||
|
|
by the device."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { configManager 46 }
|
||
|
|
|
||
|
|
configSnapshotIPv6Select OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..1)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A set of this object causes
|
||
|
|
IPv6 configuration data to
|
||
|
|
be included in the snap-shot file generated
|
||
|
|
by the device."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { configManager 47 }
|
||
|
|
|
||
|
|
configSnapshotRIPngSelect OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..1)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A set of this object causes
|
||
|
|
RIPng configuration data to
|
||
|
|
be included in the snap-shot file generated
|
||
|
|
by the device."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { configManager 48 }
|
||
|
|
|
||
|
|
configSnapshotAtmSelect OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..1)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A set of this object causes
|
||
|
|
ATM configuration data to
|
||
|
|
be included in the snap-shot file generated
|
||
|
|
by the device. NOT SUPPORTED."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { configManager 49 }
|
||
|
|
|
||
|
|
|
||
|
|
configSnapshotSonetSelect OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..1)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A set of this object causes
|
||
|
|
Sonet configuration data to
|
||
|
|
be included in the snap-shot file generated
|
||
|
|
by the device. NOT SUPPORTED."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { configManager 50 }
|
||
|
|
|
||
|
|
configSnapshotNTPSelect OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..1)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A set of this object causes
|
||
|
|
NTP configuration data to
|
||
|
|
be included in the snap-shot file generated
|
||
|
|
by the device."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { configManager 51 }
|
||
|
|
|
||
|
|
|
||
|
|
configSnapshotPortMappingSelect OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..1)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A set of this object causes
|
||
|
|
Port Mapping configuration data to
|
||
|
|
be included in the snap-shot file generated
|
||
|
|
by the device."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { configManager 52 }
|
||
|
|
|
||
|
|
|
||
|
|
configSnapshotOSPF3Select OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..1)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A set of this object causes
|
||
|
|
OSPF3 configuration data to
|
||
|
|
be included in the snap-shot file generated
|
||
|
|
by the device."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { configManager 53 }
|
||
|
|
|
||
|
|
|
||
|
|
configWriteMemoryStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
noneAvail(1),
|
||
|
|
inProgress(2),
|
||
|
|
completeNoErrors(3),
|
||
|
|
completeErrors(4)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Status of most recent wwrite memory action."
|
||
|
|
DEFVAL { noneAvail }
|
||
|
|
::= { configManager 54 }
|
||
|
|
|
||
|
|
|
||
|
|
configSnapshotStackSelect OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..1)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A set of this object causes
|
||
|
|
STack Manager configuration data to
|
||
|
|
be included in the snap-shot file generated
|
||
|
|
by the device."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { configManager 55 }
|
||
|
|
|
||
|
|
configSnapshotISISSelect OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..1)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A set of this object causes
|
||
|
|
ISIS configuration data to
|
||
|
|
be included in the snap-shot file generated
|
||
|
|
by the device."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { configManager 56 }
|
||
|
|
|
||
|
|
|
||
|
|
configSnapshotEOAMSelect OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..1)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A set of this object causes
|
||
|
|
Ethernet OAM configuration data to
|
||
|
|
be included in the snap-shot file generated
|
||
|
|
by the device."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { configManager 57 }
|
||
|
|
|
||
|
|
|
||
|
|
configSnapshotUDLDSelect OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..1)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A set of this object causes
|
||
|
|
UDLD configuration data to
|
||
|
|
be included in the snap-shot file generated
|
||
|
|
by the device."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { configManager 58 }
|
||
|
|
|
||
|
|
configSnapshotNETSECSelect OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..1)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A set of this object causes
|
||
|
|
NETSEC configuration data to
|
||
|
|
be included in the snap-shot file generated
|
||
|
|
by the device."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { configManager 59 }
|
||
|
|
|
||
|
|
configSnapshotIPsecSelect OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..1)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A set of this object causes
|
||
|
|
IP Security configuration data to
|
||
|
|
be included in the snap-shot file generated
|
||
|
|
by the device."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { configManager 60 }
|
||
|
|
|
||
|
|
configSnapshotBFDSelect OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..1)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A set of this object causes
|
||
|
|
BFD configuration data to
|
||
|
|
be included in the snap-shot file generated
|
||
|
|
by the device."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { configManager 61 }
|
||
|
|
|
||
|
|
configSnapshotMultiChassisSelect OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..1)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A set of this object causes
|
||
|
|
MCM configuration data to
|
||
|
|
be included in the snap-shot file generated
|
||
|
|
by the device."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { configManager 62 }
|
||
|
|
|
||
|
|
configSnapshotErpSelect OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..1)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A set of this object causes
|
||
|
|
ERP configuration data to
|
||
|
|
be included in the snap-shot file generated
|
||
|
|
by the device."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { configManager 63 }
|
||
|
|
|
||
|
|
configSnapshotMPLSSelect OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..1)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A set of this object causes
|
||
|
|
MPLS configuration data to
|
||
|
|
be included in the snap-shot file generated
|
||
|
|
by the device."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { configManager 64 }
|
||
|
|
|
||
|
|
configSnapshotEFMOAMSelect OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..1)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A set of this object causes
|
||
|
|
EFMOAM configuration data to
|
||
|
|
be included in the snap-shot file generated
|
||
|
|
by the device."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { configManager 65}
|
||
|
|
|
||
|
|
configSnapshotCapabilitySelect OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..1)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A set of this object causes
|
||
|
|
capability manager configuration data to
|
||
|
|
be included in the snap-shot file generated
|
||
|
|
by the device."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { configManager 66 }
|
||
|
|
|
||
|
|
configSnapshotVfcSelect OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..1)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A set of this object causes
|
||
|
|
VFC configuration data to
|
||
|
|
be included in the snap-shot file generated
|
||
|
|
by the device."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { configManager 67 }
|
||
|
|
|
||
|
|
configSnapshotHaVlanSelect OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..1)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A set of this object causes
|
||
|
|
HA VLAN configuration data to
|
||
|
|
be included in the snap-shot file generated
|
||
|
|
by the device."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { configManager 68 }
|
||
|
|
|
||
|
|
configSnapshotDaUnpSelect OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..1)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A set of this object causes
|
||
|
|
DA UNP configuration data to
|
||
|
|
be included in the snap-shot file generated
|
||
|
|
by the device."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { configManager 69 }
|
||
|
|
|
||
|
|
configSnapshotDHLSelect OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..1)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A set of this object causes
|
||
|
|
DHL configuration data to
|
||
|
|
be included in the snap-shot file generated
|
||
|
|
by the device."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { configManager 70 }
|
||
|
|
|
||
|
|
configSnapshotMVRPSelect OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..1)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A set of this object causes
|
||
|
|
MVRP configuration data to
|
||
|
|
be included in the snap-shot file generated
|
||
|
|
by the device."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { configManager 71 }
|
||
|
|
|
||
|
|
configSnapshotSAASelect OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..1)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A set of this object causes
|
||
|
|
SAA configuration data to
|
||
|
|
be included in the snap-shot file generated
|
||
|
|
by the device."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { configManager 72 }
|
||
|
|
|
||
|
|
configSnapshotSPBSelect OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..1)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A set of this object causes
|
||
|
|
SPB configuration data to
|
||
|
|
be included in the snap-shot file generated
|
||
|
|
by the device."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { configManager 73 }
|
||
|
|
|
||
|
|
configSnapshotSPBIsisSelect OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..1)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A set of this object causes
|
||
|
|
SPB ISIS configuration data to
|
||
|
|
be included in the snap-shot file generated
|
||
|
|
by the device."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { configManager 74 }
|
||
|
|
|
||
|
|
configSnapshotVirtualChassisSelect OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..1)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A set of this object causes VCM configuration
|
||
|
|
data to be included in the snap-shot file
|
||
|
|
generated by the device. A set of this object
|
||
|
|
is only valid in standalone mode"
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { configManager 75 }
|
||
|
|
|
||
|
|
configSnapshotMplsLdpSelect OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..1)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A set of this object causes
|
||
|
|
MPLS LDP configuration data to
|
||
|
|
be included in the snap-shot file generated
|
||
|
|
by the device."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { configManager 76 }
|
||
|
|
|
||
|
|
configSnapshotVCMSpecific OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..1)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A set of this object causes
|
||
|
|
VCM configuration data for the chassis
|
||
|
|
specified by configSnapshotChassisId to
|
||
|
|
be included in the snap-shot file generated
|
||
|
|
by the device A set of this object is only
|
||
|
|
valid in virtual chassis mode."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { configManager 77 }
|
||
|
|
|
||
|
|
configSnapshotChassisId OBJECT-TYPE
|
||
|
|
SYNTAX VirtualOperChassisId
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A set of this object in combination with
|
||
|
|
configSnapshotVCMSpecific causes
|
||
|
|
VCM configuration data for the specified
|
||
|
|
chassis to be included in the snap-shot
|
||
|
|
file generated by the device. A set of
|
||
|
|
this object is only valid in virtual
|
||
|
|
chassis mode."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { configManager 78 }
|
||
|
|
|
||
|
|
configSnapshotEvbSelect OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..1)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A set of this object causes
|
||
|
|
EVB configuration data to
|
||
|
|
be included in the snap-shot file generated
|
||
|
|
by the device."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { configManager 79 }
|
||
|
|
|
||
|
|
configConvertConfiguration OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
notSignificant(0),
|
||
|
|
virtualChassis(1)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A set of this object to virtualChassis is only valid in
|
||
|
|
standalone mode and causes a virtual chassis snapshot to be
|
||
|
|
generated from the running configuration. The resulting
|
||
|
|
vcsetup.cfg and vcboot.cfg files are stored in the directory
|
||
|
|
specified by configConvertDestinationDirectory. If no directory
|
||
|
|
is specified the running directory will be used provided the
|
||
|
|
running directory is not the certified directory."
|
||
|
|
DEFVAL { notSignificant }
|
||
|
|
::= { configManager 80 }
|
||
|
|
|
||
|
|
configConvertConfigurationStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
noneAvail(1),
|
||
|
|
inProgress(2),
|
||
|
|
completeNoErrors(3),
|
||
|
|
completeErrors(4)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Status of most recent convert configuration action."
|
||
|
|
DEFVAL { noneAvail }
|
||
|
|
::= { configManager 81 }
|
||
|
|
|
||
|
|
configConvertDestinationDirectory OBJECT-TYPE
|
||
|
|
SYNTAX SnmpAdminString (SIZE (0..45))
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The destination directory for the files created by the action
|
||
|
|
of setting the configConvertConfiguration object."
|
||
|
|
DEFVAL { "" }
|
||
|
|
::= { configManager 82 }
|
||
|
|
|
||
|
|
configConvertReload OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..1)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A set of this object will initiate a reboot of the
|
||
|
|
switch as part of the configConvertConfiguration
|
||
|
|
action."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { configManager 83 }
|
||
|
|
|
||
|
|
configSnapshotAppfpSelect OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..1)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A set of this object causes
|
||
|
|
Application Finger Print configuration data to
|
||
|
|
be included in the snap-shot file generated
|
||
|
|
by the device."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { configManager 84 }
|
||
|
|
|
||
|
|
configSnapshotFipsSelect OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..1)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A set of this object causes
|
||
|
|
FIP Snooping configuration data to
|
||
|
|
be included in the snap-shot file generated
|
||
|
|
by the device."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { configManager 85 }
|
||
|
|
|
||
|
|
configSnapshotLFPSelect OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..1)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A set of this object causes
|
||
|
|
LFP configuration data to
|
||
|
|
be included in the snap-shot file generated
|
||
|
|
by the device."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { configManager 86 }
|
||
|
|
|
||
|
|
configSnapshotPmInterfaceSelect OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..1)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A set of this object causes
|
||
|
|
Port Manager Interfaceconfiguration data to
|
||
|
|
be included in the snap-shot file generated
|
||
|
|
by the device."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { configManager 87 }
|
||
|
|
|
||
|
|
configSnapshotAutofabricSelect OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..1)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A set of this object causes
|
||
|
|
Autofabric configuration data to
|
||
|
|
be included in the snap-shot file generated
|
||
|
|
by the device."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { configManager 88 }
|
||
|
|
|
||
|
|
configSnapshotDhcpv6RelaySelect OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..1)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A set of this object causes
|
||
|
|
DHCPv6 Relay configuration data to
|
||
|
|
be included in the snap-shot file generated
|
||
|
|
by the device."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { configManager 89 }
|
||
|
|
|
||
|
|
configSnapshotSIPSelect OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..1)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A set of this object causes
|
||
|
|
Autofabric configuration data to
|
||
|
|
be included in the snap-shot file generated
|
||
|
|
by the device."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { configManager 90 }
|
||
|
|
|
||
|
|
configSnapshotOpenflowSelect OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..1)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A set of this object causes
|
||
|
|
Openflow configuration data to
|
||
|
|
be included in the snap-shot file generated
|
||
|
|
by the device."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { configManager 91 }
|
||
|
|
|
||
|
|
configSnapshotWlanSelect OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..1)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A set of this object causes
|
||
|
|
Wlan configuration data to
|
||
|
|
be included in the snap-shot file generated
|
||
|
|
by the device."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { configManager 92 }
|
||
|
|
|
||
|
|
configSnapshotDhcpSrvSelect OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..1)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A set of this object causes
|
||
|
|
DhcpSrv configuration data to
|
||
|
|
be included in the snap-shot file generated
|
||
|
|
by the device."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { configManager 93 }
|
||
|
|
|
||
|
|
configSnapshotDPISelect OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..1)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A set of this object causes
|
||
|
|
Dpi configuration data to
|
||
|
|
be included in the snap-shot file generated
|
||
|
|
by the device."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { configManager 94 }
|
||
|
|
|
||
|
|
configSnapshotMsgSrvSelect OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..1)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A set of this object causes
|
||
|
|
MsgSrv configuration data to
|
||
|
|
be included in the snap-shot file generated
|
||
|
|
by the device."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { configManager 95 }
|
||
|
|
|
||
|
|
configSnapshotAlSrvSelect OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..1)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A set of this object causes
|
||
|
|
ActiveLeaseSrv configuration data to
|
||
|
|
be included in the snap-shot file generated
|
||
|
|
by the device."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { configManager 96 }
|
||
|
|
|
||
|
|
configSnapshotDhcpv6SrvSelect OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..1)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A set of this object causes
|
||
|
|
Dhcp6Srv configuration data to
|
||
|
|
be included in the snap-shot file generated
|
||
|
|
by the device."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { configManager 97 }
|
||
|
|
|
||
|
|
configSnapshotAGSelect OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..1)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A set of this object causes
|
||
|
|
AG configuration data to be included
|
||
|
|
in the snap-shot file generated by the
|
||
|
|
the device."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { configManager 98 }
|
||
|
|
|
||
|
|
configSnapshotQMRSelect OBJECT-TYPE
|
||
|
|
|
||
|
|
|
||
|
|
SYNTAX Integer32 (0..1)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A set of this object causes
|
||
|
|
QMR configuration data to be included
|
||
|
|
in the snap-shot file generated by the
|
||
|
|
the device."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { configManager 99 }
|
||
|
|
|
||
|
|
configSnapshotVCSPSelect OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..1)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A set of this object causes
|
||
|
|
VCSP configuration data to
|
||
|
|
be included in the snap-shot file generated
|
||
|
|
by the device."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { configManager 100 }
|
||
|
|
|
||
|
|
configSnapshotDhcpSnoopingSelect OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..1)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A set of this object causes
|
||
|
|
DHCP SNOOPING configuration data to
|
||
|
|
be included in the snap-shot file generated
|
||
|
|
by the device."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { configManager 101 }
|
||
|
|
|
||
|
|
configSnapshotAppMonSelect OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..1)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A set of this object causes
|
||
|
|
Application Monitoring configuration data to
|
||
|
|
be included in the snap-shot file generated
|
||
|
|
by the device."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { configManager 102 }
|
||
|
|
|
||
|
|
configSnapshotLbdSelect OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..1)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A set of this object causes
|
||
|
|
Loopback Detection configuration data to
|
||
|
|
be included in the snap-shot file generated
|
||
|
|
by the device."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { configManager 103 }
|
||
|
|
|
||
|
|
configSnapshotVMSnoopSelect OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..1)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A set of this object causes
|
||
|
|
VM Snooping configuration data to
|
||
|
|
be included in the snap-shot file generated
|
||
|
|
by the device."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { configManager 104 }
|
||
|
|
|
||
|
|
configSnapshotPppoeIaSelect OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..1)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A set of this object causes
|
||
|
|
PPPoE-IA configuration data to
|
||
|
|
be included in the snap-shot file generated
|
||
|
|
by the device."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { configManager 105}
|
||
|
|
|
||
|
|
configSnapshotPmPortViolationSelect OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..1)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A set of this object causes
|
||
|
|
Port Violation configuration data to
|
||
|
|
be included in the snap-shot file generated
|
||
|
|
by the device."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { configManager 106}
|
||
|
|
|
||
|
|
configSnapshotLanPowerSelect OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..1)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A set of this object causes
|
||
|
|
Lan Power configuration data to
|
||
|
|
be included in the snap-shot file generated
|
||
|
|
by the device."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { configManager 107}
|
||
|
|
|
||
|
|
configSnapshotPVLANSelect OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..1)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A set of this object causes
|
||
|
|
Private VLAN(PVLAN) configuration data to
|
||
|
|
be included in the snap-shot file generated
|
||
|
|
by the device."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { configManager 108 }
|
||
|
|
|
||
|
|
--
|
||
|
|
-- Compliance Statements
|
||
|
|
--
|
||
|
|
|
||
|
|
alcatelIND1ConfigMgrMIBCompliance MODULE-COMPLIANCE
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Compliance statement for Configuration Manager Subsystem."
|
||
|
|
MODULE -- this module
|
||
|
|
|
||
|
|
MANDATORY-GROUPS
|
||
|
|
{
|
||
|
|
configFileGroup,
|
||
|
|
configTimerFileGroup,
|
||
|
|
configSnapshotGroup,
|
||
|
|
configTechSupportLogGroup,
|
||
|
|
configWriteMemoryGroup,
|
||
|
|
configConvertConfigurationGroup
|
||
|
|
}
|
||
|
|
|
||
|
|
::= { alcatelIND1ConfigMgrMIBCompliances 1 }
|
||
|
|
|
||
|
|
|
||
|
|
--
|
||
|
|
-- Units of Conformance
|
||
|
|
--
|
||
|
|
|
||
|
|
configFileGroup OBJECT-GROUP
|
||
|
|
OBJECTS
|
||
|
|
{
|
||
|
|
configFileName,
|
||
|
|
configFileAction,
|
||
|
|
configErrorFileName,
|
||
|
|
configFileStatus,
|
||
|
|
configFileMode,
|
||
|
|
configErrorFileMaximum,
|
||
|
|
configChangeStatus
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Collection of objects for file configuration."
|
||
|
|
::= { alcatelIND1ConfigMgrMIBGroups 1}
|
||
|
|
|
||
|
|
|
||
|
|
configTimerFileGroup OBJECT-GROUP
|
||
|
|
OBJECTS
|
||
|
|
{
|
||
|
|
configTimerFileName,
|
||
|
|
configTimerFileTime,
|
||
|
|
configTimerFileStatus,
|
||
|
|
configTimerClear,
|
||
|
|
configSnapshotFileName
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Collection of objects for timer file configuration."
|
||
|
|
::= { alcatelIND1ConfigMgrMIBGroups 2}
|
||
|
|
|
||
|
|
|
||
|
|
configSnapshotGroup OBJECT-GROUP
|
||
|
|
OBJECTS
|
||
|
|
{
|
||
|
|
configSnapshotAction,
|
||
|
|
configSnapshotAllSelect,
|
||
|
|
configSnapshotVCMSpecific,
|
||
|
|
configSnapshotChassisId,
|
||
|
|
configSnapshotVlanSelect,
|
||
|
|
configSnapshotSpanningTreeSelect,
|
||
|
|
configSnapshotQOSSelect,
|
||
|
|
configSnapshotIPSelect,
|
||
|
|
configSnapshotIPXSelect,
|
||
|
|
configSnapshotIPMSSelect,
|
||
|
|
configSnapshotAAASelect,
|
||
|
|
configSnapshotSNMPSelect,
|
||
|
|
configSnapshot8021QSelect,
|
||
|
|
configSnapshotLinkAggregateSelect,
|
||
|
|
configSnapshotPortMirrorSelect,
|
||
|
|
configSnapshotXIPSelect,
|
||
|
|
configSnapshotHealthMonitorSelect,
|
||
|
|
configSnapshotBootPSelect,
|
||
|
|
configSnapshotBridgeSelect,
|
||
|
|
configSnapshotChassisSelect,
|
||
|
|
configSnapshotInterfaceSelect,
|
||
|
|
configSnapshotPolicySelect,
|
||
|
|
configSnapshotSessionSelect,
|
||
|
|
configSnapshotServerLoadBalanceSelect,
|
||
|
|
configSnapshotSystemServiceSelect,
|
||
|
|
configSnapshotVRRPSelect,
|
||
|
|
configSnapshotWebSelect,
|
||
|
|
configSnapshotRIPSelect,
|
||
|
|
configSnapshotOSPFSelect,
|
||
|
|
configSnapshotBGPSelect,
|
||
|
|
configSnapshotIPRMSelect,
|
||
|
|
configSnapshotIPMRSelect,
|
||
|
|
configSnapshotModuleSelect,
|
||
|
|
configSnapshotRDPSelect,
|
||
|
|
configSnapshotIPv6Select,
|
||
|
|
configSnapshotRIPngSelect,
|
||
|
|
configSnapshotAtmSelect,
|
||
|
|
configSnapshotSonetSelect,
|
||
|
|
configSnapshotNTPSelect,
|
||
|
|
configSnapshotPortMappingSelect,
|
||
|
|
configSnapshotOSPF3Select,
|
||
|
|
configSnapshotStackSelect,
|
||
|
|
configWriteMemoryStatus,
|
||
|
|
configSnapshotISISSelect,
|
||
|
|
configSnapshotEOAMSelect,
|
||
|
|
configSnapshotUDLDSelect,
|
||
|
|
configSnapshotNETSECSelect,
|
||
|
|
configSnapshotIPsecSelect,
|
||
|
|
configSnapshotBFDSelect,
|
||
|
|
configSnapshotMultiChassisSelect,
|
||
|
|
configSnapshotEFMOAMSelect,
|
||
|
|
configSnapshotMPLSSelect,
|
||
|
|
configSnapshotErpSelect,
|
||
|
|
configSnapshotCapabilitySelect,
|
||
|
|
configSnapshotVfcSelect,
|
||
|
|
configSnapshotHaVlanSelect,
|
||
|
|
configSnapshotDaUnpSelect,
|
||
|
|
configSnapshotDHLSelect,
|
||
|
|
configSnapshotMVRPSelect,
|
||
|
|
configSnapshotSAASelect,
|
||
|
|
configSnapshotSPBSelect,
|
||
|
|
configSnapshotSPBIsisSelect,
|
||
|
|
configSnapshotVirtualChassisSelect,
|
||
|
|
configSnapshotMplsLdpSelect,
|
||
|
|
configSnapshotEvbSelect,
|
||
|
|
configSnapshotAppfpSelect,
|
||
|
|
configSnapshotFipsSelect,
|
||
|
|
configSnapshotLFPSelect,
|
||
|
|
configSnapshotPmInterfaceSelect,
|
||
|
|
configSnapshotAutofabricSelect,
|
||
|
|
configSnapshotDhcpv6RelaySelect,
|
||
|
|
configSnapshotSIPSelect,
|
||
|
|
configSnapshotOpenflowSelect,
|
||
|
|
configSnapshotWlanSelect,
|
||
|
|
configSnapshotDhcpSrvSelect,
|
||
|
|
configSnapshotDPISelect,
|
||
|
|
configSnapshotMsgSrvSelect,
|
||
|
|
configSnapshotAlSrvSelect,
|
||
|
|
configSnapshotDhcpv6SrvSelect,
|
||
|
|
configSnapshotAGSelect,
|
||
|
|
configSnapshotQMRSelect,
|
||
|
|
configSnapshotVCSPSelect,
|
||
|
|
configSnapshotDhcpSnoopingSelect,
|
||
|
|
configSnapshotAppMonSelect,
|
||
|
|
configSnapshotVMSnoopSelect,
|
||
|
|
configSnapshotLbdSelect,
|
||
|
|
configSnapshotPppoeIaSelect,
|
||
|
|
configSnapshotPmPortViolationSelect,
|
||
|
|
configSnapshotLanPowerSelect,
|
||
|
|
configSnapshotPVLANSelect
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Collection of objects for snapshot configuration."
|
||
|
|
::= { alcatelIND1ConfigMgrMIBGroups 3}
|
||
|
|
|
||
|
|
|
||
|
|
configTechSupportLogGroup OBJECT-GROUP
|
||
|
|
OBJECTS
|
||
|
|
{
|
||
|
|
configTechSupportLogAction
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Collection of objects for technical support log file."
|
||
|
|
::= { alcatelIND1ConfigMgrMIBGroups 4}
|
||
|
|
|
||
|
|
|
||
|
|
configWriteMemoryGroup OBJECT-GROUP
|
||
|
|
OBJECTS
|
||
|
|
{
|
||
|
|
configWriteMemory
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Collection of objects for write memory."
|
||
|
|
::= { alcatelIND1ConfigMgrMIBGroups 5}
|
||
|
|
|
||
|
|
|
||
|
|
configConvertConfigurationGroup OBJECT-GROUP
|
||
|
|
OBJECTS
|
||
|
|
{
|
||
|
|
configConvertConfiguration,
|
||
|
|
configConvertConfigurationStatus,
|
||
|
|
configConvertDestinationDirectory,
|
||
|
|
configConvertReload
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Collection of objects for write memory."
|
||
|
|
::= { alcatelIND1ConfigMgrMIBGroups 6}
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
END
|