david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
main
mibs/MIBS/nokia/aos7/ALCATEL-IND1-DCBX-MIB

1063 lines
32 KiB
Plaintext
Raw Permalink Normal View History

Initial commit
2023-12-05 12:25:34 +01:00
ALCATEL-IND1-DCBX-MIB DEFINITIONS ::= BEGIN
IMPORTS
Unsigned32,
Counter64,
MODULE-IDENTITY,
OBJECT-TYPE,
OBJECT-IDENTITY,
NOTIFICATION-TYPE
FROM SNMPv2-SMI
TruthValue,
RowStatus,
TEXTUAL-CONVENTION
FROM SNMPv2-TC
OBJECT-GROUP,
MODULE-COMPLIANCE
FROM SNMPv2-CONF
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB
LldpXdot1dcbxSupportedCapacity,
LldpXdot1dcbxTrafficClassValue,
LldpXdot1dcbxTrafficClassBandwidthValue,
LldpXdot1dcbxTrafficSelectionAlgorithm,
LldpXdot1dcbxAppSelector,
LldpXdot1dcbxAppProtocol,
lldpXdot1dcbxAdminApplicationPriorityAEProtocol,
lldpXdot1dcbxAdminApplicationPriorityAESelector
FROM LLDP-EXT-DOT1-V2-MIB
IEEE8021PriorityValue
FROM IEEE8021-TC-MIB
lldpV2LocPortIfIndex
FROM LLDP-V2-MIB
VfcEnableState
FROM ALCATEL-IND1-VIRTUAL-FLOW-CONTROL-MIB
softentIND1Dcbx
FROM ALCATEL-IND1-BASE;
alcatelIND1DcbxMIB MODULE-IDENTITY
LAST-UPDATED "201106280000Z"
ORGANIZATION "Alcatel-Lucent"
CONTACT-INFO
"Please consult with Customer Service to ensure the most appropriate
version of this document is used with the products in question:
Alcatel-Lucent, Enterprise Solutions Division
(Formerly Alcatel Internetworking, Incorporated)
26801 West Agoura Road
Agoura Hills, CA 91301-5122
United States Of America
Telephone: North America +1 800 995 2696
Latin America +1 877 919 9526
Europe +31 23 556 0100
Asia +65 394 7933
All Other +1 818 878 4507
Electronic Mail: support@ind.alcatel.com
World Wide Web: http://alcatel-lucent.com/wps/portal/enterprise
File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs"
DESCRIPTION
"This module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
For the Birds Of Prey Product Line
System Capability Manager, to allow for system control and limitation setting, of
different, features through out the system.
Capability manager is a centralized process which provides hardware information and
capability to other processes. To optimize the system performance , certain features
may be configured to a lower than the hardware limit through capability manager.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) 1995-2011 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDE"
REVISION "201106280000Z"
DESCRIPTION
"Capability Manager is used to set system wide limitation."
::= { softentIND1Dcbx 1 }
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
alcatelIND1DcbxMIBObjects OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch For VFC-DCBX Subsystem Managed Objects."
::= { alcatelIND1DcbxMIB 1 }
alcatelIND1DcbxMIBConformance OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch For VFC-DCBX Subsystem Conformance Information."
::= { alcatelIND1DcbxMIB 2 }
alcatelIND1DcbxMIBGroups OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch For VFC-DCBX Subsystem Units Of Conformance."
::= { alcatelIND1DcbxMIBConformance 1 }
alcatelIND1DcbxMIBCompliances OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch For VFC-DCBX Subsystem Compliance Statements."
::= { alcatelIND1DcbxMIBConformance 2 }
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
alaDcbxConfig OBJECT IDENTIFIER ::= { alcatelIND1DcbxMIBObjects 1 }
alaDcbxConformance OBJECT IDENTIFIER ::= { alcatelIND1DcbxMIBObjects 2 }
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
DcbxTrafficFlow ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Indicates the traffic flow
0: Lossy
1: Lossless"
SYNTAX INTEGER {
tfLossy(0),
tfLossless(1)
}
DcbxPriorityTCMap ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Each group of four octets in this string specify
a 32-bit Traffic class ID. The IDs are stored in network
byte order; i.e. octet N corresponds to the most
significant 8 bits of the ID, and octet N+3 correspond
to the least significant 8 bits. The list is
large enough to hold 8 TC IDs, one per priority. The first
first 4 octets represent the first priority."
SYNTAX OCTET STRING (SIZE (32))
DcbxStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Indicates the dcbx status (could be related to hardware)
0: OK
1: PFC Resources Exhausted
2: PFC TLV Mismatch
3: ETS TLV Mismatch
4: PFC and ETS TLV Mismatch"
SYNTAX INTEGER {
ok(0),
pfcResourcesExhausted(1),
pfcTlvMismatch(2),
etsTlvMismatch(3),
etsPfcTlvMismatch(4)
}
DcbxActionTaken ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Indicates the action taken as a result of DcbxStatus
0: No action taken (dcbx might not be operationaly UP)
1: Restored ETS admin config
2: Restored PFC admin config
3: Disabled PFC
4: Restored ETS and PFC admin config
5: Configured local admin
6: Configured local recommended
7: Configured remote admin
8: Configured remote recommended"
SYNTAX INTEGER {
na(0),
restEtsAdminCfg(1),
restPfcAdminCfg(2),
disabledPfc(3),
restEtsPfcAdminCfg(4),
cfgLocalAdmin(5),
cfgLocalRecom(6),
cfgRemoteAdmin(7),
cfgRemoteRecom(8)
}
DcbxTCsPresent ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Octet representing the traffic classes present
in a particular profile. Each bit represents the
presence of the traffic class. The first bit indicates
if TC 0 is present, the second bit indicates TC 1,
and so forth. Bit value 1 indicates the TC is present.
Bit value 0 indicates the TC is not present.
Can be used to change the TC numbering."
SYNTAX OCTET STRING (SIZE (1))
DcbxVersion ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Indicates the dcbx version
0: IEEE
1: CEE
2: AUTO"
SYNTAX INTEGER {
ieee(0),
cee(1),
auto(2)
}
RemoteDcbxVersion ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Indicates the remote dcbx version
0: IEEE
1: CEE
2: AUTO
3: Unknown"
SYNTAX INTEGER {
ieee(0),
cee(1),
auto(2),
unknown(3)
}
-- xxxxxxxxxxxxxxxxxx
-- DCB Profile Table
-- xxxxxxxxxxxxxxxxxx
alaDcbxDCProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaDcbxDCProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of Data Center profiles."
::= { alaDcbxConfig 1 }
alaDcbxDCProfileEntry OBJECT-TYPE
SYNTAX AlaDcbxDCProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A DCB profile entry."
INDEX { alaDcbxDCPId }
::= { alaDcbxDCProfileTable 1 }
AlaDcbxDCProfileEntry ::= SEQUENCE {
alaDcbxDCPId
Unsigned32,
alaDcbxDCPName
SnmpAdminString,
alaDcbxDCPETSTrafficClassesSupported
LldpXdot1dcbxSupportedCapacity,
alaDcbxDCPPFCCap
LldpXdot1dcbxSupportedCapacity,
alaDcbxDCPPriorityTCMap
DcbxPriorityTCMap,
alaDcbxDCPTemplateDCPId
Unsigned32,
alaDcbxDCPTemplateDCPName
SnmpAdminString,
alaDcbxDCPTCsPresent
DcbxTCsPresent,
alaDcbxDCP8023xPauseReady
VfcEnableState,
alaDcbxDCPRowStatus
RowStatus
}
alaDcbxDCPId OBJECT-TYPE
SYNTAX Unsigned32 (1..128)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Identifier of DCB profile."
::= { alaDcbxDCProfileEntry 1 }
alaDcbxDCPName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Name of DCB profile."
::= { alaDcbxDCProfileEntry 2 }
alaDcbxDCPETSTrafficClassesSupported OBJECT-TYPE
SYNTAX LldpXdot1dcbxSupportedCapacity
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of traffic classes supported."
::= { alaDcbxDCProfileEntry 3 }
alaDcbxDCPPFCCap OBJECT-TYPE
SYNTAX LldpXdot1dcbxSupportedCapacity
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of traffic classes on the local device
that may simultaneously have PFC enabled."
::= { alaDcbxDCProfileEntry 4 }
alaDcbxDCPPriorityTCMap OBJECT-TYPE
SYNTAX DcbxPriorityTCMap
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the priority TC map. All 8 priorities are assigned a TC."
::= { alaDcbxDCProfileEntry 5 }
alaDcbxDCPTemplateDCPId OBJECT-TYPE
SYNTAX Unsigned32(1..128)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Identifier of Template DCB profile. Used when creating a new profile.
The template profile values will be copied to the new profile."
::= { alaDcbxDCProfileEntry 6 }
alaDcbxDCPTemplateDCPName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Name of Template DCB profile. Used when creating a new profile.
The template profile values will be copied to the new profile."
::= { alaDcbxDCProfileEntry 7 }
alaDcbxDCPTCsPresent OBJECT-TYPE
SYNTAX DcbxTCsPresent
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Represents the traffic classes present in this particular profile.
Can be used to change the TC numbering. For example, a profile
with TCs numbered 0, 1, 2, can be changed to 1, 5, 7. The numbering
is assigned in increasing order. The number of TCs specified must
match the current number of TCs in the profile."
::= { alaDcbxDCProfileEntry 8 }
alaDcbxDCP8023xPauseReady OBJECT-TYPE
SYNTAX VfcEnableState
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Makes a profile pause-ready. Can only be set during profile creation.
When enabled, the PFC is lossy for all traffic classes in the profile
and they cannot be changed to lossless. Applying this profile to a port
will allow the port to have 802.2x pause enabled through the interfaces
commands. Can be applied to ports with a standard VFC profile. Can
be applied to a DCB port only if pfc willing and pfc tlv bits are disabled."
DEFVAL { disabled }
::= { alaDcbxDCProfileEntry 9 }
alaDcbxDCPRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"alaDcbxDCPRowStatus controls the creation and deletion of
rows in the table."
::= { alaDcbxDCProfileEntry 10 }
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-- DCB Profile Traffic Class Table
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
alaDcbxDCPTrafficClassTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaDcbxDCPTCEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of Traffic Classes for the DCB Profiles."
::= { alaDcbxConfig 2 }
alaDcbxDCPTCEntry OBJECT-TYPE
SYNTAX AlaDcbxDCPTCEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A DCB profile traffic class entry."
INDEX { alaDcbxDCPTCDCPId, alaDcbxDCPTCTrafficClass }
::= { alaDcbxDCPTrafficClassTable 1 }
AlaDcbxDCPTCEntry ::= SEQUENCE {
alaDcbxDCPTCDCPId
Unsigned32,
alaDcbxDCPTCTrafficClass
LldpXdot1dcbxTrafficClassValue,
alaDcbxDCPTCDCPName
SnmpAdminString,
alaDcbxDCPTCMaximumBandwidth
LldpXdot1dcbxTrafficClassBandwidthValue,
alaDcbxDCPTCMinimumBandwidth
LldpXdot1dcbxTrafficClassBandwidthValue,
alaDcbxDCPTCPFCLinkDelay
Unsigned32,
alaDcbxDCPTCPFCLinkDelayUserModified
TruthValue,
alaDcbxDCPTCPFCTrafficFlow
DcbxTrafficFlow,
alaDcbxDCPTCPriorityMap
Unsigned32,
alaDcbxDCPTCTrafficScheduler
LldpXdot1dcbxTrafficSelectionAlgorithm,
alaDcbxDCPTCRecommendedBandwidth
LldpXdot1dcbxTrafficClassBandwidthValue,
alaDcbxDCPTCRecommendedTrafficScheduler
LldpXdot1dcbxTrafficSelectionAlgorithm
}
alaDcbxDCPTCDCPId OBJECT-TYPE
SYNTAX Unsigned32 (1..128)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Identifier of DCB profile."
::= { alaDcbxDCPTCEntry 1 }
alaDcbxDCPTCTrafficClass OBJECT-TYPE
SYNTAX LldpXdot1dcbxTrafficClassValue
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the traffic class."
::= { alaDcbxDCPTCEntry 2 }
alaDcbxDCPTCDCPName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Name of DCB profile."
::= { alaDcbxDCPTCEntry 3 }
alaDcbxDCPTCMaximumBandwidth OBJECT-TYPE
SYNTAX LldpXdot1dcbxTrafficClassBandwidthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the max bandwidth assigned to this traffic class."
::= { alaDcbxDCPTCEntry 4 }
alaDcbxDCPTCMinimumBandwidth OBJECT-TYPE
SYNTAX LldpXdot1dcbxTrafficClassBandwidthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the min bandwidth assigned to this traffic class."
::= { alaDcbxDCPTCEntry 5 }
alaDcbxDCPTCPFCLinkDelay OBJECT-TYPE
SYNTAX Unsigned32 (0 | 10..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"PFC link delay allowance.
Default for a lossy TC is 0 and cannot be any other value.
Default for a lossless TC is 52 and can be changed in a valid range (10-100)."
::= { alaDcbxDCPTCEntry 6 }
alaDcbxDCPTCPFCLinkDelayUserModified OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates if the Link Delay value has been modified by the user."
DEFVAL { false }
::= { alaDcbxDCPTCEntry 7 }
alaDcbxDCPTCPFCTrafficFlow OBJECT-TYPE
SYNTAX DcbxTrafficFlow
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates if PFC traffic flow is enabled on this traffic class"
::= { alaDcbxDCPTCEntry 8 }
alaDcbxDCPTCPriorityMap OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A bitmap that indicates the priorities assigned to this traffic
class."
::= { alaDcbxDCPTCEntry 9 }
alaDcbxDCPTCTrafficScheduler OBJECT-TYPE
SYNTAX LldpXdot1dcbxTrafficSelectionAlgorithm
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the traffic class scheduler algorithm assigned to
this traffic class."
::= { alaDcbxDCPTCEntry 10 }
alaDcbxDCPTCRecommendedBandwidth OBJECT-TYPE
SYNTAX LldpXdot1dcbxTrafficClassBandwidthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the recommended min bandwidth assigned to this traffic class."
::= { alaDcbxDCPTCEntry 11 }
alaDcbxDCPTCRecommendedTrafficScheduler OBJECT-TYPE
SYNTAX LldpXdot1dcbxTrafficSelectionAlgorithm
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the recommended traffic class scheduler algorithm assigned to
this traffic class."
::= { alaDcbxDCPTCEntry 12 }
-- xxxxxxxxxxxxxxxxxxxxxxxx
-- DCB Port Instance Table
-- xxxxxxxxxxxxxxxxxxxxxxxx
alaDcbxPortInstanceTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaDcbxPortInstanceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of DCP Port Instances."
::= { alaDcbxConfig 3 }
alaDcbxPortInstanceEntry OBJECT-TYPE
SYNTAX AlaDcbxPortInstanceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A DCP Port Instance Entry.
Creating this entry for a port will change the port mode
to DCB, set the default DCB profile (if none is specified),
will disable NDCB features, and will create a set of
alaDcbxPIPrioEntrys for the port."
INDEX { alaDcbxPIIfIndex }
::= { alaDcbxPortInstanceTable 1 }
AlaDcbxPortInstanceEntry ::= SEQUENCE {
alaDcbxPIIfIndex
Unsigned32,
alaDcbxPIDCBXAdmin
VfcEnableState,
alaDcbxPIDCBXOper
VfcEnableState,
alaDcbxPIAdminDCPId
Unsigned32,
alaDcbxPIAdminDCPName
SnmpAdminString,
alaDcbxPILocalModified
TruthValue,
alaDcbxPIPFCDefense
VfcEnableState,
alaDcbxPIPFCStatsClear
VfcEnableState,
alaDcbxPIStatus
DcbxStatus,
alaDcbxPIActionTaken
DcbxActionTaken,
alaDcbxPIRowStatus
RowStatus,
alaDcbxPIDCBXVersion
DcbxVersion,
alaDcbxPIDCBXOperVersion
DcbxVersion,
alaDcbxPIDCBXRemoteOperVersion
RemoteDcbxVersion
}
alaDcbxPIIfIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Identifier of DCB profile applied to this port."
::= { alaDcbxPortInstanceEntry 1 }
alaDcbxPIDCBXAdmin OBJECT-TYPE
SYNTAX VfcEnableState
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"DCBX Admin State. Enable or Disable all DCBX features on this port."
DEFVAL { enabled }
::= { alaDcbxPortInstanceEntry 2 }
alaDcbxPIDCBXOper OBJECT-TYPE
SYNTAX VfcEnableState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"DCBX Oper State. Enable or Disable all DCBX features on this port."
DEFVAL { disabled }
::= { alaDcbxPortInstanceEntry 3 }
alaDcbxPIAdminDCPId OBJECT-TYPE
SYNTAX Unsigned32 (1..128)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Identifier of DCB profile applied to this port."
::= { alaDcbxPortInstanceEntry 4 }
alaDcbxPIAdminDCPName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Name of DCB profile applied to this port."
::= { alaDcbxPortInstanceEntry 5 }
alaDcbxPILocalModified OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value is true if local configuration is different from configuration
imported from the DCB profile applied to this port."
DEFVAL { false }
::= { alaDcbxPortInstanceEntry 6 }
alaDcbxPIPFCDefense OBJECT-TYPE
SYNTAX VfcEnableState
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"PFC Defense Mode. Applies when PFC negotiation fails. If value is enabled,
then PFC becomes disabled but traffic still flows. If the value is disabled,
then PFC local configuration remains on the port."
DEFVAL { enabled }
::= { alaDcbxPortInstanceEntry 7 }
alaDcbxPIPFCStatsClear OBJECT-TYPE
SYNTAX VfcEnableState
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Clear the PFC stats for this port."
DEFVAL { disabled }
::= { alaDcbxPortInstanceEntry 8 }
alaDcbxPIStatus OBJECT-TYPE
SYNTAX DcbxStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates port status."
DEFVAL { ok }
::= { alaDcbxPortInstanceEntry 9 }
alaDcbxPIActionTaken OBJECT-TYPE
SYNTAX DcbxActionTaken
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the action taken as a result of the status."
DEFVAL { na }
::= { alaDcbxPortInstanceEntry 10 }
alaDcbxPIRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Controls the creation and deletion of
rows in the alaDcbxPortInstanceTable."
::= { alaDcbxPortInstanceEntry 11 }
alaDcbxPIDCBXVersion OBJECT-TYPE
SYNTAX DcbxVersion
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"DCBX Version selected on this port."
::= { alaDcbxPortInstanceEntry 12 }
alaDcbxPIDCBXOperVersion OBJECT-TYPE
SYNTAX DcbxVersion
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"DCBX Version operating on this port."
::= { alaDcbxPortInstanceEntry 13 }
alaDcbxPIDCBXRemoteOperVersion OBJECT-TYPE
SYNTAX RemoteDcbxVersion
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"DCBX Remote Version operating on this port."
::= { alaDcbxPortInstanceEntry 14 }
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-- DCB Profile Traffic Class Table
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
alaDcbxPIPriorityTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaDcbxPIPrioEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of Priorities for DCP Port Instances."
::= { alaDcbxConfig 4 }
alaDcbxPIPrioEntry OBJECT-TYPE
SYNTAX AlaDcbxPIPrioEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A DCB profile traffic class entry."
INDEX { alaDcbxPIPrioIfIndex, alaDcbxPIPrioPriority }
::= { alaDcbxPIPriorityTable 1 }
AlaDcbxPIPrioEntry ::= SEQUENCE {
alaDcbxPIPrioIfIndex
Unsigned32,
alaDcbxPIPrioPriority
IEEE8021PriorityValue,
alaDcbxPIPrioTC
LldpXdot1dcbxTrafficClassValue,
alaDcbxPIPrioPFCPacketsReceived
Counter64,
alaDcbxPIPrioPFCPacketsTransmitted
Counter64
}
alaDcbxPIPrioIfIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Identifier of DCP Port Instance."
::= { alaDcbxPIPrioEntry 1 }
alaDcbxPIPrioPriority OBJECT-TYPE
SYNTAX IEEE8021PriorityValue
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the priority of the DCP Port Instance."
::= { alaDcbxPIPrioEntry 2 }
alaDcbxPIPrioTC OBJECT-TYPE
SYNTAX LldpXdot1dcbxTrafficClassValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the traffic class this priority belongs to."
::= { alaDcbxPIPrioEntry 3 }
alaDcbxPIPrioPFCPacketsReceived OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total PFC received packet count."
::= { alaDcbxPIPrioEntry 4 }
alaDcbxPIPrioPFCPacketsTransmitted OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total PFC transmitted packet count."
::= { alaDcbxPIPrioEntry 5 }
-- xxxxxxxxxxxxxxxxxxxxxxx
-- PFC Lossless Usage Info
-- xxxxxxxxxxxxxxxxxxxxxxx
alaDcbxPfcLLPrioritiesUsed OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object specifies the number of PFC Lossless Priorities
in use in the system."
::= { alaDcbxConfig 5 }
alaDcbxPfcLLPrioritiesReserved OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object specifies the number of PFC Lossless Priorities
in reserved in the system."
::= { alaDcbxConfig 6 }
alaDcbxPfcLLPrioritiesAvailable OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object specifies the number of Priorities
available to be configured as PFC Lossless."
::= { alaDcbxConfig 7 }
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-- PFC Lossless Usage Info - Virtual Chassis Compatible
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
alaDcbxPfcUsageTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaDcbxPfcUsageEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of chassis entries. Each depicts the pfc priorities available
per chassis. Only valid for TOR platform. In Virtual Chassis mode there is
an entry per chassis. In non-Virtual Chassis mode, only one entry is present."
::= { alaDcbxConfig 8 }
alaDcbxPfcUsageEntry OBJECT-TYPE
SYNTAX AlaDcbxPfcUsageEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A PFC usage class entry."
INDEX { alaDcbxPfcUsageChassisId }
::= { alaDcbxPfcUsageTable 1 }
AlaDcbxPfcUsageEntry ::= SEQUENCE {
alaDcbxPfcUsageChassisId
Unsigned32,
alaDcbxPfcUsagePrioritiesUsed
Unsigned32,
alaDcbxPfcUsagePrioritiesReserved
Unsigned32,
alaDcbxPfcUsagePrioritiesAvailable
Unsigned32
}
alaDcbxPfcUsageChassisId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Chassis ID."
::= { alaDcbxPfcUsageEntry 1 }
alaDcbxPfcUsagePrioritiesUsed OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the number of PFC Lossless Priorities
in use."
::= { alaDcbxPfcUsageEntry 2 }
alaDcbxPfcUsagePrioritiesReserved OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the number of PFC Lossless Priorities
reserved."
::= { alaDcbxPfcUsageEntry 3 }
alaDcbxPfcUsagePrioritiesAvailable OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the number of Priorities
available to be configured as PFC Lossless."
::= { alaDcbxPfcUsageEntry 4 }
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-- DCBX APP PRIO configuration. Used to delete an entry
---in standard mib containing application priorities
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
alaXdot1dcbxAdminApplicationPriorityAppTable OBJECT-TYPE
SYNTAX SEQUENCE OF
AlaXdot1dcbxAdminApplicationPriorityAppEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table containing entries indicating the status of the corresponding row in lldpXdot1dcbxAdminApplicationPriorityAppTable "
::= { alaDcbxConfig 9 }
alaXdot1dcbxAdminApplicationPriorityAppEntry OBJECT-TYPE
SYNTAX AlaXdot1dcbxAdminApplicationPriorityAppEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry that indicates the rowstatus of application priority entry in lldpXdot1dcbxAdminApplicationPriorityAppTable "
INDEX {
lldpV2LocPortIfIndex,
lldpXdot1dcbxAdminApplicationPriorityAESelector,
lldpXdot1dcbxAdminApplicationPriorityAEProtocol
}
::= { alaXdot1dcbxAdminApplicationPriorityAppTable 1 }
AlaXdot1dcbxAdminApplicationPriorityAppEntry ::=
SEQUENCE {
alaXdot1dcbxAdminApplicationPriorityAEPriority
IEEE8021PriorityValue,
alaXdot1dcbxAdminApplicationPriorityAppRowStatus
RowStatus
}
alaXdot1dcbxAdminApplicationPriorityAEPriority OBJECT-TYPE
SYNTAX IEEE8021PriorityValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The priority code point that should be used in
frames transporting the protocol indicated by
alaXdot1dcbxAdminApplicationPriorityAESelector and
alaXdot1dcbxAdminApplicationPriorityAEProtocol"
::= { alaXdot1dcbxAdminApplicationPriorityAppEntry 1 }
alaXdot1dcbxAdminApplicationPriorityAppRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object controls only the deletion of an entry in
lldpXdot1dcbxAdminApplicationPriorityAppTable."
::= { alaXdot1dcbxAdminApplicationPriorityAppEntry 2 }
-- -------------------------------------------------------------
-- Compliance Statements
-- -------------------------------------------------------------
alcatelIND1DcbxMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Compliance statement for VFC-DCBX Subsystem."
MODULE -- this module
MANDATORY-GROUPS
{
alaDcbxDCProfileGroup,
alaDcbxDCPTrafficClassGroup,
alaDcbxPortInstanceGroup,
alaDcbxPortInstancePriorityGroup,
alaDcbxPfcUsageGroup,
alaDcbxPfcUsageNewGroup
}
::= { alcatelIND1DcbxMIBCompliances 1 }
-- -------------------------------------------------------------
-- Units Of Conformance
-- -------------------------------------------------------------
alaDcbxDCProfileGroup OBJECT-GROUP
OBJECTS
{
alaDcbxDCPName,
alaDcbxDCPETSTrafficClassesSupported,
alaDcbxDCPPFCCap,
alaDcbxDCPPriorityTCMap,
alaDcbxDCPTemplateDCPId,
alaDcbxDCPTemplateDCPName,
alaDcbxDCPTCsPresent,
alaDcbxDCP8023xPauseReady,
alaDcbxDCPRowStatus
}
STATUS current
DESCRIPTION
"Collection of DCB Profile for management of DCBX."
::= { alcatelIND1DcbxMIBGroups 1 }
alaDcbxDCPTrafficClassGroup OBJECT-GROUP
OBJECTS
{
alaDcbxDCPTCDCPName,
alaDcbxDCPTCMaximumBandwidth,
alaDcbxDCPTCMinimumBandwidth,
alaDcbxDCPTCPFCLinkDelay,
alaDcbxDCPTCPFCLinkDelayUserModified,
alaDcbxDCPTCPFCTrafficFlow,
alaDcbxDCPTCPriorityMap,
alaDcbxDCPTCTrafficScheduler,
alaDcbxDCPTCRecommendedBandwidth,
alaDcbxDCPTCRecommendedTrafficScheduler
}
STATUS current
DESCRIPTION
"Collection of DCB Profile Traffic Class for management of DCBX."
::= { alcatelIND1DcbxMIBGroups 2 }
alaDcbxPortInstanceGroup OBJECT-GROUP
OBJECTS
{
alaDcbxPIDCBXAdmin,
alaDcbxPIDCBXOper,
alaDcbxPIAdminDCPId,
alaDcbxPIAdminDCPName,
alaDcbxPILocalModified,
alaDcbxPIPFCDefense,
alaDcbxPIPFCStatsClear,
alaDcbxPIStatus,
alaDcbxPIActionTaken,
alaDcbxPIRowStatus,
alaDcbxPIDCBXVersion,
alaDcbxPIDCBXOperVersion,
alaDcbxPIDCBXRemoteOperVersion
}
STATUS current
DESCRIPTION
"Collection of DCP Port Instances for management of DCBX."
::= { alcatelIND1DcbxMIBGroups 3 }
alaDcbxPortInstancePriorityGroup OBJECT-GROUP
OBJECTS
{
alaDcbxPIPrioTC,
alaDcbxPIPrioPFCPacketsReceived,
alaDcbxPIPrioPFCPacketsTransmitted
}
STATUS current
DESCRIPTION
"Collection of DCP Port Instance Traffic Class for management of DCBX."
::= { alcatelIND1DcbxMIBGroups 4 }
alaDcbxPfcUsageGroup OBJECT-GROUP
OBJECTS
{
alaDcbxPfcLLPrioritiesUsed,
alaDcbxPfcLLPrioritiesReserved,
alaDcbxPfcLLPrioritiesAvailable
}
STATUS current
DESCRIPTION
"Collection of PFC Lossless TC Usage Objects."
::= { alcatelIND1DcbxMIBGroups 5 }
alaDcbxPfcUsageNewGroup OBJECT-GROUP
OBJECTS
{
alaDcbxPfcUsagePrioritiesUsed,
alaDcbxPfcUsagePrioritiesReserved,
alaDcbxPfcUsagePrioritiesAvailable
}
STATUS current
DESCRIPTION
"Collection of PFC Lossless Priorities Usage Objects. Compatible with
Virtual Chassis mode."
::= { alcatelIND1DcbxMIBGroups 6 }
alaXdot1dcbxAdminApplicationPriorityGroup OBJECT-GROUP
OBJECTS
{
alaXdot1dcbxAdminApplicationPriorityAEPriority,
alaXdot1dcbxAdminApplicationPriorityAppRowStatus
}
STATUS current
DESCRIPTION
"Collection of dcbx app priority configuration Usage Objects. "
::= { alcatelIND1DcbxMIBGroups 7 }
END
Reference in New Issue Copy Permalink