mibs/MIBS/nokia/aos7/ALCATEL-IND1-DHCPV6-MIB

448 lines
15 KiB
Plaintext
Raw Permalink Normal View History

2023-12-05 12:25:34 +01:00
ALCATEL-IND1-DHCPV6-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
IpAddress, Integer32, Unsigned32, Counter32
FROM SNMPv2-SMI
TEXTUAL-CONVENTION, PhysAddress, DisplayString,RowStatus, TimeStamp, TruthValue, DateAndTime
FROM SNMPv2-TC
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB
MODULE-COMPLIANCE, OBJECT-GROUP,
NOTIFICATION-GROUP
FROM SNMPv2-CONF
Ipv6Address, Ipv6IfIndexOrZero
FROM IPV6-TC
softentIND1Ipv6
FROM ALCATEL-IND1-BASE
ipv6IfIndex
FROM IPV6-MIB
InetAddress, InetAddressType
FROM INET-ADDRESS-MIB;
alcatelIND1DHCPv6MIB MODULE-IDENTITY
LAST-UPDATED "201303220000Z"
ORGANIZATION "Alcatel-Lucent"
CONTACT-INFO
"Please consult with Customer Service to ensure the most appropriate
version of this document is used with the products in question:
Alcatel-Lucent, Enterprise Solutions Division
(Formerly Alcatel Internetworking, Incorporated)
26801 West Agoura Road
Agoura Hills, CA 91301-5122
United States Of America
Telephone: North America +1 800 995 2696
Latin America +1 877 919 9526
Europe +31 23 556 0100
Asia +65 394 7933
All Other +1 818 878 4507
Electronic Mail: support@ind.alcatel.com
World Wide Web: http://alcatel-lucent.com/wps/portal/enterprise
File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs"
DESCRIPTION
"This module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
Propietary DHCPv6 MIB definitions
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special,
or consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) 2013 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDE"
REVISION "201303220000Z"
DESCRIPTION
"The first version of this MIB Module."
::= { softentIND1Ipv6 2 }
alcatelIND1DHCPv6MIBObjects OBJECT IDENTIFIER ::= { alcatelIND1DHCPv6MIB 1 }
--
-- Alcatel DHCPv6 configuration
--
alaDHCPv6RelayConfig OBJECT IDENTIFIER ::= { alcatelIND1DHCPv6MIBObjects 1 }
alaDHCPv6RelayAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Global DHCPv6 administrative status. This object provides a
means to globally enable or disable the DHCPv6 relay feature.
DHCPv6 Relay must still be enabled on individual interfaces
in order for relay operation to occur."
::= { alaDHCPv6RelayConfig 1 }
alaDHCPv6SrvConfig OBJECT IDENTIFIER ::= { alcatelIND1DHCPv6MIBObjects 2 }
alaDHCPv6SrvGlobalConfigStatus OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to enable(1) or disable(2) DHCPv6 Server on the switch."
DEFVAL { disable }
::= { alaDHCPv6SrvConfig 1 }
alaDHCPv6SrvGlobalRestart OBJECT-TYPE
SYNTAX INTEGER
{
inactive(1),
restart(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to restart(2) the DHCPv6 Server on the switch. Default value is
inactive(1) which user can not set."
DEFVAL { inactive }
::= { alaDHCPv6SrvConfig 2 }
alaDHCPv6SrvGlobalClearStat OBJECT-TYPE
SYNTAX INTEGER
{
default(1),
reset(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Defines the global clear statistics control for DHCPv6 Server.
default(1) - default value for this object,
reset(2) - indicates that all statistic related to DHCPv6
server in the system should get cleared."
DEFVAL { default }
::= { alaDHCPv6SrvConfig 3 }
--
-- Alcatel DHCPv6 Relay Interface Table
--
alaDHCPv6RelayInterfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaDHCPv6RelayInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table controlling DHCPv6 Relay on IPv6 interfaces.
This table extends the corresponding IPv6 interface
entry in alaIPv6InterfaceTable."
::= { alcatelIND1DHCPv6MIBObjects 3 }
alaDHCPv6RelayInterfaceEntry OBJECT-TYPE
SYNTAX AlaDHCPv6RelayInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An DHCPv6 relay interface entry."
INDEX { ipv6IfIndex }
::= { alaDHCPv6RelayInterfaceTable 1 }
AlaDHCPv6RelayInterfaceEntry ::= SEQUENCE {
alaDHCPv6RelayInterfaceAdminStatus INTEGER
}
alaDHCPv6RelayInterfaceAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"DHCPv6 administrative status on the interface."
::= { alaDHCPv6RelayInterfaceEntry 1 }
--
-- Alcatel DHCPv6 Relay Destination Table
--
alaDHCPv6RelayDestinationTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaDHCPv6RelayDestinationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table allowing the creation and removal of DHCPv6
Relay destinations for an interface."
::= { alcatelIND1DHCPv6MIBObjects 4 }
alaDHCPv6RelayDestinationEntry OBJECT-TYPE
SYNTAX AlaDHCPv6RelayDestinationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A DHCPv6 relay destination entry."
INDEX {
ipv6IfIndex,
alaDHCPv6RelayDestinationAddressType,
alaDHCPv6RelayDestinationAddress
}
::= { alaDHCPv6RelayDestinationTable 1 }
AlaDHCPv6RelayDestinationEntry ::= SEQUENCE {
alaDHCPv6RelayDestinationAddressType InetAddressType,
alaDHCPv6RelayDestinationAddress InetAddress,
alaDHCPv6RelayDestinationRowStatus RowStatus
}
alaDHCPv6RelayDestinationAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The address type of a DHCPv6 relay destination.
Only ipv6(2) or ipv6z(4) are allowed."
::= { alaDHCPv6RelayDestinationEntry 1 }
alaDHCPv6RelayDestinationAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IPv6 address of a DHCPv6 relay destination."
::= { alaDHCPv6RelayDestinationEntry 2 }
alaDHCPv6RelayDestinationRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Used to control the addition and removal of DHCPv6
relay destinations."
::= { alaDHCPv6RelayDestinationEntry 3 }
--
-- Alcatel DHCPv6 Server Lease Table
--
alaDHCPv6SrvLease OBJECT IDENTIFIER ::= { alcatelIND1DHCPv6MIBObjects 5 }
alaDHCPv6SrvLeaseTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaDHCPv6SrvLeaseEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"DHCPv6 server lease table."
::= { alaDHCPv6SrvLease 1 }
alaDHCPv6SrvLeaseEntry OBJECT-TYPE
SYNTAX AlaDHCPv6SrvLeaseEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"DHCPv6 server lease entry."
INDEX { alaDHCPv6SrvLeaseIpv6Address }
::= { alaDHCPv6SrvLeaseTable 1 }
AlaDHCPv6SrvLeaseEntry ::= SEQUENCE {
alaDHCPv6SrvLeaseIpv6Address Ipv6Address,
alaDHCPv6SrvLeaseLeaseGrant DateAndTime,
alaDHCPv6SrvLeasePrefLeaseExpiry DateAndTime,
alaDHCPv6SrvLeaseValidLeaseExpiry DateAndTime,
alaDHCPv6SrvLeaseType INTEGER
}
alaDHCPv6SrvLeaseIpv6Address OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IPv6 address assigned to the client"
::= { alaDHCPv6SrvLeaseEntry 1 }
alaDHCPv6SrvLeaseLeaseGrant OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Lease granted time for the client."
::= { alaDHCPv6SrvLeaseEntry 2 }
alaDHCPv6SrvLeasePrefLeaseExpiry OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Preferred Lease expiry of the client."
::= { alaDHCPv6SrvLeaseEntry 3 }
alaDHCPv6SrvLeaseValidLeaseExpiry OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Valid Lease expiry of the client."
::= { alaDHCPv6SrvLeaseEntry 4 }
alaDHCPv6SrvLeaseType OBJECT-TYPE
SYNTAX INTEGER
{
unavailable(1),
dynamic(2),
manual(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Type of the lease."
::= { alaDHCPv6SrvLeaseEntry 5 }
--
-- Notifications
--
alcatelIND1DHCPv6MIBNotifications OBJECT IDENTIFIER ::= { alcatelIND1DHCPv6MIB 0 }
-- --------------------------------------------------------------
-- Trap Description
-- --------------------------------------------------------------
alaDHCPv6SrvTrapsObj OBJECT IDENTIFIER ::= { alcatelIND1DHCPv6MIBObjects 6 }
alaDHCPv6SrvLeaseUtilizationThresholdTrap NOTIFICATION-TYPE
OBJECTS {
alaDHCPv6SrvLeaseThresholdStatus,
alaDHCPv6SrvSubnetDescriptor
}
STATUS current
DESCRIPTION
"When the lease utilization in a subnet exceeds or deceeds threshold
value set by the application, a notification is sent to the Management Entity,
with the DHCPv6 Server lease utilization information."
::= { alcatelIND1DHCPv6MIBNotifications 1 }
alaDHCPv6SrvLeaseThresholdStatus OBJECT-TYPE
SYNTAX INTEGER
{
crossedBelow80Threshold(1),
crossedAbove80Threshold(2),
reached100Threshold(3)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object specifies the threshold status of subnet utilization."
::= { alaDHCPv6SrvTrapsObj 1 }
alaDHCPv6SrvSubnetDescriptor OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object specifies the subnet Descriptor. Denotes the IPv6 address"
::= { alaDHCPv6SrvTrapsObj 2 }
--
-- conformance information
--
alcatelIND1DHCPv6MIBConformance OBJECT IDENTIFIER ::= { alcatelIND1DHCPv6MIB 2 }
alcatelIND1DHCPv6MIBCompliances OBJECT IDENTIFIER ::= { alcatelIND1DHCPv6MIBConformance 1 }
alcatelIND1DHCPv6MIBGroups OBJECT IDENTIFIER ::= { alcatelIND1DHCPv6MIBConformance 2 }
alaDHCPv6Compliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for switches implementing ALCATEL-IND1-DHCPV6-MIB."
MODULE
GROUP alaDHCPv6RelayGroup
DESCRIPTION
"The alaDHCPv6RelayGroup is mandatory when the managed entity
supports DHCPv6 relay."
GROUP alaDHCPv6SrvGroup
DESCRIPTION
"The alaDHCPv6SrvGroup is mandatory when the managed entity
supports DHCPv6 server."
GROUP alaDHCPv6SrvNotificationsGroup
DESCRIPTION
"The alaDHCPv6SrvNotificationsGroup is mandatory when the managed entity
supports DHCPv6 server."
GROUP alaDHCPv6SrvLeaseUtilizationThresholdGroup
DESCRIPTION
" The alaDHCPv6SrvLeaseUtilizationThresholdGroup is mandatory when the
managed entity supports DHCPv6 server."
::= { alcatelIND1DHCPv6MIBCompliances 1 }
--
-- units of conformance
--
alaDHCPv6RelayGroup OBJECT-GROUP
OBJECTS {
alaDHCPv6RelayAdminStatus,
alaDHCPv6RelayInterfaceAdminStatus,
-- alaDHCPv6RelayDestinationAddressType,
-- alaDHCPv6RelayDestinationAddress,
alaDHCPv6RelayDestinationRowStatus
}
STATUS current
DESCRIPTION
"A collection of objects to support management of DHCPv6 Relay."
::= { alcatelIND1DHCPv6MIBGroups 1 }
alaDHCPv6SrvGroup OBJECT-GROUP
OBJECTS {
alaDHCPv6SrvGlobalConfigStatus,
alaDHCPv6SrvGlobalRestart,
alaDHCPv6SrvGlobalClearStat,
-- alaDHCPv6SrvLeaseIpv6Address,
alaDHCPv6SrvLeaseLeaseGrant,
alaDHCPv6SrvLeasePrefLeaseExpiry,
alaDHCPv6SrvLeaseValidLeaseExpiry,
alaDHCPv6SrvLeaseType
}
STATUS current
DESCRIPTION
"A collection of objects to support management of DHCPv6 server."
::= { alcatelIND1DHCPv6MIBGroups 2 }
alaDHCPv6SrvNotificationsGroup NOTIFICATION-GROUP
NOTIFICATIONS { alaDHCPv6SrvLeaseUtilizationThresholdTrap }
STATUS current
DESCRIPTION
"Notifications for DHCPv6 server."
::= { alcatelIND1DHCPv6MIBGroups 3 }
alaDHCPv6SrvLeaseUtilizationThresholdGroup OBJECT-GROUP
OBJECTS
{
alaDHCPv6SrvLeaseThresholdStatus,
alaDHCPv6SrvSubnetDescriptor
}
STATUS current
DESCRIPTION
"When the lease utilization in a subnet exceeds or deceeds threshold
value set by the application, a notification is sent to the Management Entity,
with the DHCPv6 Server lease utilization information."
::= { alcatelIND1DHCPv6MIBGroups 4 }
END