mibs/MIBS/nokia/aos7/ALCATEL-IND1-DHL-MIB

591 lines
20 KiB
Plaintext
Raw Permalink Normal View History

2023-12-05 12:25:34 +01:00
ALCATEL-IND1-DHL-MIB DEFINITIONS ::= BEGIN
IMPORTS
Integer32,
MODULE-IDENTITY, OBJECT-TYPE,
NOTIFICATION-TYPE, OBJECT-IDENTITY
FROM SNMPv2-SMI
RowStatus
FROM SNMPv2-TC
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB
InterfaceIndex
FROM IF-MIB
MODULE-COMPLIANCE, OBJECT-GROUP,
NOTIFICATION-GROUP
FROM SNMPv2-CONF
softentIND1DHL
FROM ALCATEL-IND1-BASE;
alcatelIND1DHLMIB MODULE-IDENTITY
LAST-UPDATED "201008150000Z"
ORGANIZATION "Alcatel - Architects Of An Internet World"
CONTACT-INFO
"Please consult with Customer Service to insure the most appropriate
version of this document is used with the products in question:
Alcatel Internetworking, Incorporated
(Division 1, Formerly XYLAN Corporation)
26801 West Agoura Road
Agoura Hills, CA 91301-5122
United States Of America
Telephone: North America +1 800 995 2696
Latin America +1 877 919 9526
Europe +31 23 556 0100
Asia +65 394 7933
All Other +1 818 878 4507
Electronic Mail: support@ind.alcatel.com
World Wide Web: http://www.ind.alcatel.com
File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs"
DESCRIPTION
"The Dual Homed Link uses two links with a number of VLANs split between
them from the common pool of vlans, in such a way that any vlan is not
associated with both of the redundant links at the same time to avoid formation
of loops and also VLANs are still connected to the core when one link fails.
STP is disabled on both the DHL links implicitly."
::= { softentIND1DHL 1 }
alcatelIND1DHLMIBNotifications OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch For DHL Subsystem Notifications."
::= { alcatelIND1DHLMIB 0 }
alcatelIND1DHLMIBObjects OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch For DHL Subsystem Managed Objects."
::= { alcatelIND1DHLMIB 1 }
alcatelIND1DHLMIBConformance OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch for DHL Module MIB Subsystem Conformance Information."
::= { alcatelIND1DHLMIB 2 }
alcatelIND1DHLMIBGroups OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch for DHL Module MIB Subsystem Units of Conformance."
::= { alcatelIND1DHLMIBConformance 1 }
alcatelIND1DHLMIBCompliances OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch for DHL Module MIB Subsystem Compliance Statements."
::= { alcatelIND1DHLMIBConformance 2 }
-- --------------------------------------------------------------
alaDHLSessionConfig OBJECT IDENTIFIER ::= { alcatelIND1DHLMIBObjects 1 }
alaDHLSessionTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaDHLSessionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines the DHL control table for providing the
capability of performing DHL Active-Active operations."
::= { alaDHLSessionConfig 1 }
alaDHLSessionEntry OBJECT-TYPE
SYNTAX AlaDHLSessionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table containing information of
a single DHL (Active-Active) session."
INDEX {
alaDHLSessionIndex
}
::= { alaDHLSessionTable 1 }
AlaDHLSessionEntry ::=
SEQUENCE {
alaDHLSessionIndex Integer32,
alaDHLSessionDescr SnmpAdminString,
alaDHLSessionAdminStatus INTEGER,
alaDHLSessionOperStatus INTEGER,
alaDHLSessionPreemptionTime Integer32,
alaDHLSessionAdminMacFlushing INTEGER,
alaDHLSessionActiveMacFlushing INTEGER,
alaDHLSessionRowStatus RowStatus
}
alaDHLSessionIndex OBJECT-TYPE
SYNTAX Integer32 (1 .. 1000)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"DHL session Index identify the entries in the table.
we are currently supporting one session."
::= { alaDHLSessionEntry 1 }
alaDHLSessionDescr OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"User provided description string for the DHL session."
::= { alaDHLSessionEntry 2 }
alaDHLSessionAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
disable(1),
enable(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates whether the admin state of DHL session is ENBLED or DISABLED."
DEFVAL { disable }
::= { alaDHLSessionEntry 3 }
alaDHLSessionOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the operational state of DHL session is UP or DOWN."
DEFVAL { down }
::= { alaDHLSessionEntry 4 }
alaDHLSessionPreemptionTime OBJECT-TYPE
SYNTAX Integer32 (0..600)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Interval, in seconds, which defines the pre-emption time used for delay
in moving back the vlan to their original link."
DEFVAL { 30 }
::= { alaDHLSessionEntry 5 }
alaDHLSessionAdminMacFlushing OBJECT-TYPE
SYNTAX INTEGER {
none (1),
raw (2),
mvrp (3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Value for mac-flushing technique used for the specified DHL session."
DEFVAL { none }
::= { alaDHLSessionEntry 6 }
alaDHLSessionActiveMacFlushing OBJECT-TYPE
SYNTAX INTEGER {
none (1),
raw (2),
mvrp (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Operational state of mac-flushing technique used for the specified DHL session."
DEFVAL { none }
::= { alaDHLSessionEntry 7 }
alaDHLSessionRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object allows entries to be created and deleted in the table."
::= { alaDHLSessionEntry 8 }
alaDHLLinksConfig OBJECT IDENTIFIER ::= { alcatelIND1DHLMIBObjects 2 }
alaDHLLinksTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaDHLLinksEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines the DHLG links table for a DHL session. this table allows the
capability to add or remove the DHL links from the DHL session."
::= { alaDHLLinksConfig 1 }
alaDHLLinksEntry OBJECT-TYPE
SYNTAX AlaDHLLinksEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table, contains information of
the configured port/ling-aggs that participate in a DHL session."
INDEX {
alaDHLSessionIndex,
alaDHLLinkslinkA,
alaDHLLinkslinkB
}
::= { alaDHLLinksTable 1 }
AlaDHLLinksEntry ::=
SEQUENCE {
alaDHLLinkslinkA InterfaceIndex,
alaDHLLinkslinkB InterfaceIndex,
alaDHLLinkslinkAOperStatus INTEGER,
alaDHLLinkslinkBOperStatus INTEGER,
alaDHLLinksRowStatus RowStatus
}
alaDHLLinkslinkA OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The physical identification number for DHL linkA. it can be a physical
port or a logical port"
::= { alaDHLLinksEntry 1 }
alaDHLLinkslinkB OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The physical identification number for DHL linkB. it can be a physical
port or a logical port"
::= { alaDHLLinksEntry 2 }
alaDHLLinkslinkAOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates whether the operational state of DHL linkA is UP
or DOWN. "
DEFVAL { down }
::= { alaDHLLinksEntry 3 }
alaDHLLinkslinkBOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the operational state of DHL linkB is UP
or DOWN. "
DEFVAL { down }
::= { alaDHLLinksEntry 4 }
alaDHLLinksRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object allows entries to be created and deleted in the table."
::= { alaDHLLinksEntry 5 }
alaDHLVpa OBJECT IDENTIFIER ::= { alcatelIND1DHLMIBObjects 3 }
alaDHLVpaTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaDHLVpaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Used to display the vlan membership of the DHL links. this table is also
used to display whether a vlan is protected or unprotected and operational on which DHL link. "
::= { alaDHLVpa 1 }
alaDHLVpaEntry OBJECT-TYPE
SYNTAX AlaDHLVpaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table, contains VPA information of
of each link per DHL session."
INDEX {
alaDHLSessionIndex,
alaDHLVpalink,
alaDHLVpaVlan
}
::= { alaDHLVpaTable 1 }
AlaDHLVpaEntry ::=
SEQUENCE {
alaDHLVpalink InterfaceIndex,
alaDHLVpaVlan Integer32,
alaDHLVpaVlanType INTEGER,
alaDHLVpaActiveLink InterfaceIndex
}
alaDHLVpalink OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the vlan is member of linkA or linkB. the value is
physical identification number for DHL link. it can be a physical port or a logical port "
::= { alaDHLVpaEntry 1 }
alaDHLVpaVlan OBJECT-TYPE
SYNTAX Integer32 (1 .. 4094)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vlan number where the DHL linkA or linkB is member of it."
::= { alaDHLVpaEntry 2 }
alaDHLVpaVlanType OBJECT-TYPE
SYNTAX INTEGER {
protectedVlan (1),
unprotectedVlan (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"indicates whether the vlan is protected or un protected where
one of the DHL link is member of it."
::= { alaDHLVpaEntry 3 }
alaDHLVpaActiveLink OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"indicates the DHL link on which the vlan is operational.
If the value is zero that means the vlan is not operational and
it's unprotected."
::= { alaDHLVpaEntry 4 }
alaDHLVlanMap OBJECT IDENTIFIER ::= { alcatelIND1DHLMIBObjects 4 }
alaDHLVlanMapTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaDHLVlanMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines the DHL vlan map for linkB. this indicates the vlans
that will be operational on DHL linkB from the common pool of
vlans between DHL linkA and linkB and by default the vlans
that are not specified by this table are operational on DHL
linkA."
::= { alaDHLVlanMap 1 }
alaDHLVlanMapEntry OBJECT-TYPE
SYNTAX AlaDHLVlanMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table,
contains the vlan-map for linkB in DHL session."
INDEX {
alaDHLSessionIndex,
alaDHLVlanMapVlanStart,
alaDHLVlanMapVlanEnd
}
::= { alaDHLVlanMapTable 1 }
AlaDHLVlanMapEntry ::=
SEQUENCE {
alaDHLVlanMapVlanStart Integer32,
alaDHLVlanMapVlanEnd Integer32,
alaDHLVlanMapRowStatus RowStatus
}
alaDHLVlanMapVlanStart OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The VLAN number identifying the first vlan id in the
range. And if start and end is same then it will
be treated a one vlan id."
::= { alaDHLVlanMapEntry 1 }
alaDHLVlanMapVlanEnd OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The VLAN number identifying the end vlan id in the
range. And if start and end is same then it will
be treated a one vlan id."
::= { alaDHLVlanMapEntry 2 }
alaDHLVlanMapRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object allows entries to be created and deleted
in the table."
::= { alaDHLVlanMapEntry 3 }
alaDHLTrapsObj OBJECT IDENTIFIER ::= { alcatelIND1DHLMIBObjects 5 }
-- -------------------------------------------------------------
-- Notifications
-- -------------------------------------------------------------
alaDHLVlanMoveTrap NOTIFICATION-TYPE
OBJECTS {
alaDHLSessionID,
alaDHLPortFrom,
alaDHLPortTo,
alaDHLVlanMoveReason
}
STATUS current
DESCRIPTION
"When linkA or linkB goes down or becomes up and both the ports are
are part of some vlan-map, then this
trap is sent to the Management Entity, with the DHL port information."
::= { alcatelIND1DHLMIBNotifications 1 }
-- -------------------------------------------------------------
-- Notification Objects
-- -------------------------------------------------------------
alaDHLSessionID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object specifies the DHL Session ID for which alaDHLVlanMoveTrap needs to be
sent to the Management Entity."
::= { alaDHLTrapsObj 1 }
alaDHLPortFrom OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object specifies the port, either linkA or linkB, from which
vlan-mapped vlans have joined to other port due to linkUp or linkDown
as specified by alaDHLVlanMoveReason."
::= { alaDHLTrapsObj 2 }
alaDHLPortTo OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object specifies the port, either linkA or linkB, to which
vlan-mapped vlans have joined from other port due to linkUp or linkDown
as specified by alaDHLVlanMoveReason."
::= { alaDHLTrapsObj 3 }
alaDHLVlanMoveReason OBJECT-TYPE
SYNTAX INTEGER {
linkUp (1),
linkDown (2)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object specifies the reason for Vlan Movement from one port to another port."
::= { alaDHLTrapsObj 4 }
-- -------------------------------------------------------------
-- COMPLIANCE
-- -------------------------------------------------------------
alcatelIND1DHLMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Compliance statement for DHL."
MODULE
MANDATORY-GROUPS
{
alaDHLSessionGroup,
alaDHLLinksGroup,
alaDHLVpaGroup,
alaDHLVlanMapGroup,
alaDHLNotificationGroup
}
::= { alcatelIND1DHLMIBCompliances 1 }
-- -------------------------------------------------------------
-- UNITS OF CONFORMANCE
-- -------------------------------------------------------------
alaDHLSessionGroup OBJECT-GROUP
OBJECTS
{
alaDHLSessionDescr,
alaDHLSessionAdminStatus,
alaDHLSessionOperStatus,
alaDHLSessionPreemptionTime,
alaDHLSessionAdminMacFlushing,
alaDHLSessionActiveMacFlushing,
alaDHLSessionRowStatus
}
STATUS current
DESCRIPTION
"Collection of objects for management of a single DHL (Active-Active) session."
::= { alcatelIND1DHLMIBGroups 1 }
alaDHLLinksGroup OBJECT-GROUP
OBJECTS
{
alaDHLLinkslinkAOperStatus,
alaDHLLinkslinkBOperStatus,
alaDHLLinksRowStatus
}
STATUS current
DESCRIPTION
"Collection of objects for information of the configured port/ling-aggs
that participate in a DHL session."
::= { alcatelIND1DHLMIBGroups 2 }
alaDHLVpaGroup OBJECT-GROUP
OBJECTS
{
alaDHLVpaVlanType,
alaDHLVpaActiveLink
}
STATUS current
DESCRIPTION
"Collection of objects providing VPA information of each link
per DHL session."
::= { alcatelIND1DHLMIBGroups 3 }
alaDHLVlanMapGroup OBJECT-GROUP
OBJECTS
{
alaDHLVlanMapRowStatus
}
STATUS current
DESCRIPTION
"Collection of objects providing the vlan-map for linkB in DHL session."
::= { alcatelIND1DHLMIBGroups 4 }
alaDHLNotificationObjectGroup OBJECT-GROUP
OBJECTS
{
alaDHLSessionID,
alaDHLPortFrom,
alaDHLPortTo,
alaDHLVlanMoveReason
}
STATUS current
DESCRIPTION
"Collection of objects providing the information regarding DHL Trap."
::= { alcatelIND1DHLMIBGroups 5 }
alaDHLNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS
{
alaDHLVlanMoveTrap
}
STATUS current
DESCRIPTION
"Collection of objects for DHL Trap information."
::= { alcatelIND1DHLMIBGroups 6 }
END