david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
main
mibs/MIBS/nokia/aos7/ALCATEL-IND1-DOT3-OAM-MIB

867 lines
33 KiB
Plaintext
Raw Permalink Normal View History

Initial commit
2023-12-05 12:25:34 +01:00
ALCATEL-IND1-DOT3-OAM-MIB DEFINITIONS ::= BEGIN
IMPORTS
OBJECT-TYPE, MODULE-IDENTITY, OBJECT-IDENTITY,
Integer32, Counter32, NOTIFICATION-TYPE
FROM SNMPv2-SMI
OBJECT-GROUP,MODULE-COMPLIANCE, NOTIFICATION-GROUP
FROM SNMPv2-CONF
DisplayString, RowStatus FROM SNMPv2-TC
ifIndex FROM IF-MIB
dot3OamEntry, dot3OamLoopbackEntry, dot3OamEventLogTimestamp,
dot3OamEventLogOui, dot3OamEventLogType, dot3OamEventLogLocation,
dot3OamEventLogWindowHi, dot3OamEventLogWindowLo, dot3OamEventLogThresholdHi,
dot3OamEventLogThresholdLo, dot3OamEventLogValue, dot3OamEventLogRunningTotal,
dot3OamEventLogEventTotal, dot3OamStatsEntry
FROM DOT3-OAM-MIB
softentIND1Dot3Oam FROM ALCATEL-IND1-BASE;
alcatelIND1Dot3OamMIB MODULE-IDENTITY
LAST-UPDATED "200902250000Z" -- 02/25/2009 00:00GMT
ORGANIZATION "Alcatel - Architects Of An Internet World"
CONTACT-INFO
"Please consult with Customer Service to insure the most appropriate
version of this document is used with the products in question:
Alcatel Internetworking, Incorporated
(Division 1, Formerly XYLAN Corporation)
26801 West Agoura Road
Agoura Hills, CA 91301-5122
United States Of America
Telephone: North America +1 800 995 2696
Latin America +1 877 919 9526
Europe +31 23 556 0100
Asia +65 394 7933
All Other +1 818 878 4507
Electronic Mail: support@ind.alcatel.com
World Wide Web: http://www.ind.alcatel.com
File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs"
DESCRIPTION
"This module describes an authoritative enterprise-
specific Simple Network Management Protocol (SNMP) Management
Information Base (MIB):
For the Birds Of Prey Product Line
Ethernet in First Mile OAM.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect,
special, or consequential damages whatsoever arising from or
related to this document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) 1995-2002 Alcatel Internetworking, Incorporated
ALL RIGHTS RESERVED WORLDWIDE"
REVISION "200902250000Z"
DESCRIPTION
"Ethernet in First Mile (EFM) module for managing IEEE 802.3ah.
This 802.3ah (EFM) OAM MIB extends standard 802.3ah.
The set of objects defined in this MIB, do not duplicate,
nor conflict with any MIB object definitions defined in
the RFC 4878 MIB (dot3-oam-mib.mib)."
::= { softentIND1Dot3Oam 1}
-- --------------------------------------------------------------
--
-- Extension to - Dot3-OAM-MIB
-- Sections of the Ethernet OAM MIB
--
alcatelIND1Dot3OamNotifications OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch for 802.3ah OAM Notifications."
::= { alcatelIND1Dot3OamMIB 0 }
alcatelIND1Dot3OamMIBObjects OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch For 802.3ah OAM Objects."
::= { alcatelIND1Dot3OamMIB 1 }
alcatelIND1Dot3OamMIBConformance OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch for 802.3ah Module MIB Subsystem Conformance Information."
::= { alcatelIND1Dot3OamMIB 2 }
alcatelIND1Dot3OamMIBGroups OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch for 802.3ah Module MIB Subsystem Units of Conformance."
::= { alcatelIND1Dot3OamMIBConformance 1 }
alcatelIND1Dot3OamMIBCompliances OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch for 802.3ah Module MIB Subsystem Compliance Statements."
::= { alcatelIND1Dot3OamMIBConformance 2 }
--------------------------------------------------------------
alaDot3OamStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative status requested by management for
802.3ah. The value enabled(1) indicates that 802.3ah should
be enabled on this device, on all ports for which it has
not been specifically disabled. When disabled(2), 802.3ah
is disabled on all ports and all 802.3ah packets will be
dropped. A transition from disabled(2) to enabled(1) will
cause a reset of all 802.3ah state machines on all ports."
DEFVAL { disabled }
::= { alcatelIND1Dot3OamMIBObjects 1 }
alaDot3OamGlobalClearStats OBJECT-TYPE
SYNTAX INTEGER {
default(0),
reset(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Defines the global clear statistics control for Dot3OAM.
The value reset (1) indicates that clear all statistic counters
related to all ports in the system. By default, this object
contains a zero value."
DEFVAL { default }
::= { alcatelIND1Dot3OamMIBObjects 2 }
alaDot3OamGlobalClearEventLogs OBJECT-TYPE
SYNTAX INTEGER {
default(0),
reset(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Defines the global clear event logs control for Dot3OAM.
The value reset (1) indicates that clear all event logs
related to all ports in the system. By default, this object
contains a zero value."
DEFVAL { default }
::= { alcatelIND1Dot3OamMIBObjects 3 }
alaDot3OamGlobalClearVariableTransactions OBJECT-TYPE
SYNTAX INTEGER {
default(0),
reset(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Defines the global clear variable transactions control for
Dot3OAM. The value reset (1) indicates that clear all
transactions related to all ports in the system. By default,
this object contains a zero value."
DEFVAL { default }
::= { alcatelIND1Dot3OamMIBObjects 4 }
alaDot3OamMultiplePduCount OBJECT-TYPE
SYNTAX INTEGER (1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to set the number of PDUs that will be
sent, when OAM needs to send multiple event notification PDUs.
"
DEFVAL { 3 }
::= { alcatelIND1Dot3OamMIBObjects 5 }
-- ***************************************************************
-- DESCRIPTION:
-- "Port configuration information
-- data for the 802.3ah Module.
-- Implementation of this group is mandantory"
alaDot3OamPortConfig OBJECT IDENTIFIER ::= { alcatelIND1Dot3OamMIBObjects 8 }
alaDot3OamTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaDot3OamEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the primary controls and status for the
OAM capabilities of an Ethernet like interface. There will be
one row in this table for each Ethernet like interface in the
system that supports the OAM functions defined in [802.3ah].
"
::= { alaDot3OamPortConfig 1 }
alaDot3OamEntry OBJECT-TYPE
SYNTAX AlaDot3OamEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the table, containing information on the Ethernet
OAM function for a single Ethernet like interface. Entries in
the table are created automatically for each interface
supporting Ethernet OAM. The status of the row entry can be
determined from dot3OamOperStatus.
A alaDot3OamEntry is indexed in the alaDot3OamTable by the
ifIndex object of the Interfaces MIB.
"
AUGMENTS { dot3OamEntry }
::= { alaDot3OamTable 1 }
AlaDot3OamEntry ::=
SEQUENCE {
alaDot3OamKeepAliveInterval Integer32,
alaDot3OamHelloInterval Integer32,
alaDot3OamNextTransactionId Integer32
}
alaDot3OamKeepAliveInterval OBJECT-TYPE
SYNTAX Integer32 (5..120)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to set the timer in seconds to restart the
discovery process if no PDUs are received in this time frame.
"
DEFVAL { 5 }
::= { alaDot3OamEntry 1 }
alaDot3OamHelloInterval OBJECT-TYPE
SYNTAX Integer32 (1..60)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to set the interval between two OAMPDUs
"
DEFVAL { 1 }
::= { alaDot3OamEntry 2 }
alaDot3OamNextTransactionId OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to fetch the next available transaction id
required for MIB variable retrieval requests on this interface.
To read the remote entity's MIB variables, a unique transaction
id is generated for each request. The administrator first needs
to get the next available transaction id for the interface, and
provide this as index to the alaDot3OamRetrieveRequestTable.
"
::= { alaDot3OamEntry 3 }
-- ***************************************************************
-- DESCRIPTION:
-- "Port loopback information
-- for the 802.3ah Module.
-- Implementation of this group is mandantory"
alaDot3OamPortLoopbackControl OBJECT IDENTIFIER ::= { alcatelIND1Dot3OamMIBObjects 9 }
alaDot3OamLoopbackTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaDot3OamLoopbackEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains controls for the loopback state of the
local link as well as indicating the status of the loopback
function. There is one entry in this table for each entry in
dot3OamTable that supports loopback functionality (where
dot3OamFunctionsSupported includes the loopbackSupport bit
set).
"
::= { alaDot3OamPortLoopbackControl 1 }
alaDot3OamLoopbackEntry OBJECT-TYPE
SYNTAX AlaDot3OamLoopbackEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the table, containing information on the L1 ping.
One record/entry shall be maintained per interface. This record
shall be automatically created when L1 ping is initiated for the
first time on the interface. Subsequent ping operations shall
replace the record. Loopback capabilities of the interface can
be determined from the dot3OamLoopbackStatus object.
"
AUGMENTS { dot3OamLoopbackEntry }
::= { alaDot3OamLoopbackTable 1 }
AlaDot3OamLoopbackEntry ::=
SEQUENCE {
alaDot3OamPortL1PingFramesConf Integer32,
alaDot3OamPortL1PingFramesDelay Integer32,
alaDot3OamPortL1PingStatus INTEGER,
alaDot3OamPortL1PingFramesSent Counter32,
alaDot3OamPortL1PingFramesReceived Counter32,
alaDot3OamPortL1PingAverageRoundTripDelay Integer32
}
alaDot3OamPortL1PingFramesConf OBJECT-TYPE
SYNTAX Integer32 (1..20)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to set the number of frames to be transmitted
from the interface during L1 ping.
"
DEFVAL { 5 }
::= { alaDot3OamLoopbackEntry 1 }
alaDot3OamPortL1PingFramesDelay OBJECT-TYPE
SYNTAX Integer32 (100..1000)
UNITS "milliseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to set the delay between two
frames transmitted during L1 ping.
"
DEFVAL { 1000 }
::= { alaDot3OamLoopbackEntry 2 }
alaDot3OamPortL1PingStatus OBJECT-TYPE
SYNTAX INTEGER {
default(0),
start(1),
running(2),
operationSuccessful(3),
operationUnsuccessful(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to start the L1 ping operation. Operator
can set only start(1) value and setting of start(1) value is not valid
if object value is start(1) or running(2).
Whenever efm gets enabled on any port, this object has default(0) value.
Default(0) value implies that loopback session has not been started even
for a single time. Running(2) is corresponding to the state, when L1 ping
is going on, operationSuccessful(3) is corresponding to the state, when L1
ping operation is done successfully. operationUnsuccessful(4) is corresponding
to state when operation gets failed due to some reason.
"
::= { alaDot3OamLoopbackEntry 3 }
alaDot3OamPortL1PingFramesSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to keep the actual frames sent during
last L1 ping operation.
"
::= { alaDot3OamLoopbackEntry 4 }
alaDot3OamPortL1PingFramesReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to keep the number of frames received
during last L1 ping operation.
"
::= { alaDot3OamLoopbackEntry 5 }
alaDot3OamPortL1PingAverageRoundTripDelay OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to keep the average delay taken by frames
during last L1 ping.
"
::= { alaDot3OamLoopbackEntry 6 }
-- ***************************************************************
-- DESCRIPTION:
-- "Port statistics information
-- for the 802.3ah Module.
-- Implementation of this group is mandantory"
alaDot3OamPortStats OBJECT IDENTIFIER ::= { alcatelIND1Dot3OamMIBObjects 10 }
alaDot3OamStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaDot3OamStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains statistics for the OAM function on a
particular Ethernet like interface. There is an entry in the
table for every entry in the dot3OamStatsTable.
The counters in this table are defined as 32-bit entries to
match the counter size as defined in [802.3ah]. Given the OA
protocol is a slow protocol, the counters increment at a slow
rate.
"
::= { alaDot3OamPortStats 1 }
alaDot3OamStatsEntry OBJECT-TYPE
SYNTAX AlaDot3OamStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the table, containing statistics information on
the Ethernet OAM function for a single Ethernet like
interface. Entries are automatically created for every entry
in the dot3OamStatsTable. Counters are maintained across
transitions in dot3OamOperStatus.
"
AUGMENTS { dot3OamStatsEntry }
::= { alaDot3OamStatsTable 1 }
AlaDot3OamStatsEntry ::=
SEQUENCE {
alaDot3OamPortClearStats INTEGER
}
alaDot3OamPortClearStats OBJECT-TYPE
SYNTAX INTEGER {
default (0),
reset (1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Reset all statistics parameters corresponding to this port
By default, this objects contains a zero value.
"
DEFVAL { default }
::= { alaDot3OamStatsEntry 1 }
-- ***************************************************************
-- DESCRIPTION:
-- "Port event logs information
-- for the 802.3ah Module.
-- Implementation of this group is mandantory"
alaDot3OamPortEventLogs OBJECT IDENTIFIER ::= { alcatelIND1Dot3OamMIBObjects 11 }
alaDot3OamEventLogTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaDot3OamEventLogEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table records a history of the events that have occurred
at the Ethernet OAM level. These events can include locally
detected events, which may result in locally generated
OAMPDUs, and remotely detected events, which are detected by
the OAM peer entity and signaled to the local entity via
Ethernet OAM. Ethernet OAM events can be signaled by Event
Notification OAMPDUs or by the flags field in any OAMPDU.
"
::= { alaDot3OamPortEventLogs 1 }
alaDot3OamEventLogEntry OBJECT-TYPE
SYNTAX AlaDot3OamEventLogEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the dot3OamEventLogTable. Entries are
automatically created whenever Ethernet OAM events occur at
the local OAM entity, and when Event Notification OAMPDUs are
received at the local OAM entity (indicating events have
occurred at the peer OAM entity). The size of the table is
implementation dependent, but when the table becomes full,
older events are automatically deleted to make room for newer
events. The table index dot3OamEventLogIndex increments for
each new entry, and when the maximum value is reached the
value restarts at zero.
"
INDEX { ifIndex }
::= { alaDot3OamEventLogTable 1 }
AlaDot3OamEventLogEntry ::=
SEQUENCE {
alaDot3OamPortClearEventLogs INTEGER
}
alaDot3OamPortClearEventLogs OBJECT-TYPE
SYNTAX INTEGER {
default (0),
reset (1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Reset all event logs corresponding to this port
By default, this objects contains a zero value.
"
DEFVAL { default }
::= { alaDot3OamEventLogEntry 1 }
-- -------------------------------------------------------------
-- ETHERNET OAM MIB RETRIEVAL Request Table
-- -------------------------------------------------------------
-- DESCRIPTION:
-- "MIB Retrieval requests
-- for the 802.3ah Module.
-- Implementation of this group is mandantory"
alaDot3OamRetrieveRequest OBJECT IDENTIFIER ::= { alcatelIND1Dot3OamMIBObjects 12 }
alaDot3OamRetrieveRequestTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaDot3OamRetrieveRequestEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing MIB variable retrieval request
information"
::= { alaDot3OamRetrieveRequest 1 }
alaDot3OamRetrieveRequestEntry OBJECT-TYPE
SYNTAX AlaDot3OamRetrieveRequestEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A 802.3ah MIB variable retrieval request entry."
INDEX { ifIndex, alaDot3OamTransactionId, alaDot3OamVariableRequestBranch, alaDot3OamVariableRequestLeaf }
::= { alaDot3OamRetrieveRequestTable 1 }
AlaDot3OamRetrieveRequestEntry ::= SEQUENCE {
alaDot3OamTransactionId Integer32,
alaDot3OamVariableRequestBranch INTEGER,
alaDot3OamVariableRequestLeaf Integer32,
alaDot3OamVariableRequestRetrieveStatus INTEGER,
alaDot3OamVariableRequestRowStatus RowStatus,
alaDot3OamPortClearVariableTransactions INTEGER
}
alaDot3OamTransactionId OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object is used to set the available transaction id for
retrieving the remote MIB variable for this interface. The
value for this is obtained from alaDot3OamNextTransactionId,
which is part of alaDot3OamTable.
"
::= { alaDot3OamRetrieveRequestEntry 1 }
alaDot3OamVariableRequestBranch OBJECT-TYPE
SYNTAX INTEGER {
object(3),
package(4),
attribute(7)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object is used to set the branch to reference the MIB
object to be retrieved. This is set to attribute, package or
object depending upon the request for getting the MIB variables.
"
DEFVAL { attribute }
::= { alaDot3OamRetrieveRequestEntry 2 }
alaDot3OamVariableRequestLeaf OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object is used to set the leaf to reference the MIB
object to be retrieved.
"
::= { alaDot3OamRetrieveRequestEntry 3 }
alaDot3OamVariableRequestRetrieveStatus OBJECT-TYPE
SYNTAX INTEGER {
active(1),
failed(2),
success(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to check the status of a MIB request,
Active means that the request is currently in progress),
failed means that the request has failed, and success
means that the request returned successfully.
"
::= { alaDot3OamRetrieveRequestEntry 4 }
alaDot3OamVariableRequestRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Row Status for initiating a MIB retrieval request.
"
::= { alaDot3OamRetrieveRequestEntry 5 }
alaDot3OamPortClearVariableTransactions OBJECT-TYPE
SYNTAX INTEGER {
default(0),
reset(1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Reset all variable transactions corresponding to this port
By default, this objects contains a zero value.
"
DEFVAL { default }
::= { alaDot3OamRetrieveRequestEntry 6 }
-- -------------------------------------------------------------
-- ETHERNET OAM MIB RETRIEVAL Response Table
-- -------------------------------------------------------------
-- DESCRIPTION:
-- "MIB Retrieval response
-- for the 802.3ah Module.
-- Implementation of this group is mandantory"
alaDot3OamRetrieveResponse OBJECT IDENTIFIER ::= { alcatelIND1Dot3OamMIBObjects 13 }
alaDot3OamRetrieveResponseTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaDot3OamRetrieveResponseEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing MIB variable retrieval response
information"
::= { alaDot3OamRetrieveResponse 1 }
alaDot3OamRetrieveResponseEntry OBJECT-TYPE
SYNTAX AlaDot3OamRetrieveResponseEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A 802.3ah MIB variable retrieval response entry."
INDEX { ifIndex, alaDot3OamTransactionId, alaDot3OamVariableResponseBranch, alaDot3OamVariableResponseLeaf }
::= { alaDot3OamRetrieveResponseTable 1 }
AlaDot3OamRetrieveResponseEntry ::= SEQUENCE {
alaDot3OamVariableResponseBranch INTEGER,
alaDot3OamVariableResponseLeaf Integer32,
alaDot3OamVariableResponseValue DisplayString
}
alaDot3OamVariableResponseBranch OBJECT-TYPE
SYNTAX INTEGER {
object(3),
package(4),
attribute(7)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The branch to reference the MIB object retrieved.
"
::= { alaDot3OamRetrieveResponseEntry 1 }
alaDot3OamVariableResponseLeaf OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The leaf to reference the MIB object retrieved.
"
::= { alaDot3OamRetrieveResponseEntry 2 }
alaDot3OamVariableResponseValue OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the retrived attribute.
"
::= { alaDot3OamRetrieveResponseEntry 3 }
-- -------------------------------------------------------------
-- 802.3ah Event Notification
-- -------------------------------------------------------------
alaDot3OamThresholdEventClear NOTIFICATION-TYPE
OBJECTS { dot3OamEventLogTimestamp,
dot3OamEventLogOui,
dot3OamEventLogType,
dot3OamEventLogLocation,
dot3OamEventLogWindowHi,
dot3OamEventLogWindowLo,
dot3OamEventLogThresholdHi,
dot3OamEventLogThresholdLo,
dot3OamEventLogValue,
dot3OamEventLogRunningTotal,
dot3OamEventLogEventTotal
}
STATUS current
DESCRIPTION
"A alaDot3OamThresholdEventClear notification is sent when a local or
remote threshold crossing event is recovered.
The OAM entity can be derived from extracting the ifIndex from
the variable bindings. The objects in the notification
correspond to the values in a row instance in the
dot3OamEventLogTable."
::= { alcatelIND1Dot3OamNotifications 1 }
alaDot3OamNonThresholdEventClear NOTIFICATION-TYPE
OBJECTS { dot3OamEventLogTimestamp,
dot3OamEventLogOui,
dot3OamEventLogType,
dot3OamEventLogLocation,
dot3OamEventLogEventTotal
}
STATUS current
DESCRIPTION
"A alaDot3OamNonThresholdEventClear notification is sent when a local
or remote non-threshold crossing event is recovered.
The OAM entity can be derived from extracting the ifIndex from
the variable bindings. The objects in the notification
correspond to the values in a row instance of the
dot3OamEventLogTable."
::= { alcatelIND1Dot3OamNotifications 2 }
-- -------------------------------------------------------------
-- COMPLIANCE
-- -------------------------------------------------------------
alcatelIND1Dot3OamMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Compliance statement for 802.3ah."
MODULE
MANDATORY-GROUPS
{
alaDot3OamBaseGroup,
alaDot3OamPortConfigGroup,
alaDot3OamPortLoopbackControlGroup,
alaDot3OamPortStatsGroup,
alaDot3OamPortEventLogsGroup,
alaDot3OamRetrieveRequestGroup,
alaDot3OamRetrieveResponseGroup,
alaDot3OamNotificationGroup
}
::= { alcatelIND1Dot3OamMIBCompliances 1 }
-- -------------------------------------------------------------
-- UNITS OF CONFORMANCE
-- -------------------------------------------------------------
alaDot3OamBaseGroup OBJECT-GROUP
OBJECTS
{
alaDot3OamStatus,
alaDot3OamGlobalClearStats,
alaDot3OamGlobalClearEventLogs,
alaDot3OamGlobalClearVariableTransactions,
alaDot3OamMultiplePduCount
}
STATUS current
DESCRIPTION
"Collection of objects for management of 802.3ah Base Group."
::= { alcatelIND1Dot3OamMIBGroups 1 }
alaDot3OamPortConfigGroup OBJECT-GROUP
OBJECTS
{
alaDot3OamKeepAliveInterval,
alaDot3OamHelloInterval,
alaDot3OamNextTransactionId
}
STATUS current
DESCRIPTION
"Collection of objects for management of 802.3ah Port Configuration Table."
::= { alcatelIND1Dot3OamMIBGroups 2 }
alaDot3OamPortLoopbackControlGroup OBJECT-GROUP
OBJECTS
{
alaDot3OamPortL1PingFramesConf,
alaDot3OamPortL1PingFramesDelay,
alaDot3OamPortL1PingStatus,
alaDot3OamPortL1PingFramesSent,
alaDot3OamPortL1PingFramesReceived,
alaDot3OamPortL1PingAverageRoundTripDelay
}
STATUS current
DESCRIPTION
"Collection of objects for management of 802.3ah Loopback Table."
::= { alcatelIND1Dot3OamMIBGroups 3 }
alaDot3OamPortStatsGroup OBJECT-GROUP
OBJECTS
{
alaDot3OamPortClearStats
}
STATUS current
DESCRIPTION
"Collection of objects for management of 802.3ah Statistics Table."
::= { alcatelIND1Dot3OamMIBGroups 4 }
alaDot3OamPortEventLogsGroup OBJECT-GROUP
OBJECTS
{
alaDot3OamPortClearEventLogs
}
STATUS current
DESCRIPTION
"Collection of objects for management of 802.3ah Event Log Table."
::= { alcatelIND1Dot3OamMIBGroups 5 }
alaDot3OamRetrieveRequestGroup OBJECT-GROUP
OBJECTS
{
alaDot3OamVariableRequestRetrieveStatus,
alaDot3OamVariableRequestRowStatus,
alaDot3OamPortClearVariableTransactions
}
STATUS current
DESCRIPTION
"Collection of objects for management of 802.3ah Retrieve Request Table."
::= { alcatelIND1Dot3OamMIBGroups 6 }
alaDot3OamRetrieveResponseGroup OBJECT-GROUP
OBJECTS
{
alaDot3OamVariableResponseValue
}
STATUS current
DESCRIPTION
"Collection of objects for management of 802.3ah Retrieve Response Table."
::= { alcatelIND1Dot3OamMIBGroups 7 }
alaDot3OamNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS {
alaDot3OamThresholdEventClear,
alaDot3OamNonThresholdEventClear
}
STATUS current
DESCRIPTION
"A collection of notifications used by 802.3ah to signal
to a management entity that local or remote events have
recovered on a specified Ethernet link. "
::= { alcatelIND1Dot3OamMIBGroups 8 }
END
Reference in New Issue Copy Permalink