mibs/MIBS/nokia/aos7/ALCATEL-IND1-SNMP-AGENT-MIB

226 lines
7.3 KiB
Plaintext
Raw Permalink Normal View History

2023-12-05 12:25:34 +01:00
ALCATEL-IND1-SNMP-AGENT-MIB DEFINITIONS ::= BEGIN
IMPORTS
OBJECT-TYPE,
OBJECT-IDENTITY,
MODULE-IDENTITY,
IpAddress FROM SNMPv2-SMI
TEXTUAL-CONVENTION FROM SNMPv2-TC
OBJECT-GROUP,
MODULE-COMPLIANCE FROM SNMPv2-CONF
softentIND1SnmpAgt FROM ALCATEL-IND1-BASE;
alcatelIND1SNMPAgentMIB MODULE-IDENTITY
LAST-UPDATED "201407150000Z"
ORGANIZATION "Alcatel-Lucent"
CONTACT-INFO
"Please consult with Customer Service to ensure the most appropriate
version of this document is used with the products in question:
Alcatel-Lucent, Enterprise Solutions Division
(Formerly Alcatel Internetworking, Incorporated)
26801 West Agoura Road
Agoura Hills, CA 91301-5122
United States Of America
Telephone: North America +1 800 995 2696
Latin America +1 877 919 9526
Europe +31 23 556 0100
Asia +65 394 7933
All Other +1 818 878 4507
Electronic Mail: support@ind.alcatel.com
World Wide Web: http://alcatel-lucent.com/wps/portal/enterprise
File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs"
DESCRIPTION
"This module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
For the Birds Of Prey Product Line
SNMP Agent Subsystem.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) 1995-2007 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDE"
REVISION "201407150000Z"
DESCRIPTION
"Addressing discrepancies with Alcatel Standard."
::= { softentIND1SnmpAgt 1 }
alcatelIND1SNMPAgentMIBObjects OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch For SNMP Agent Subsystem Managed Objects."
::= { alcatelIND1SNMPAgentMIB 1 }
alcatelIND1SNMPAgentMIBConformance OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch For SNMP Agent Subsystem Conformance Information."
::= { alcatelIND1SNMPAgentMIB 2 }
alcatelIND1SNMPAgentMIBGroups OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch For SNMP Agent Subsystem Units Of Conformance."
::= { alcatelIND1SNMPAgentMIBConformance 1 }
alcatelIND1SNMPAgentMIBCompliances OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch For SNMP Agent Subsystem Compliance Statements."
::= { alcatelIND1SNMPAgentMIBConformance 2 }
--
-- SNMP Agent configuration
--
snmpAgtConfig OBJECT IDENTIFIER ::= { alcatelIND1SNMPAgentMIBObjects 1 }
SnmpAgtSecurityLevel ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The switch security level"
SYNTAX INTEGER {
noSec(1),
authSet(2),
authAll(3),
privSet(4),
privAll(5),
trapOnly(6)
}
snmpAgtSecurityLevel OBJECT-TYPE
SYNTAX SnmpAgtSecurityLevel
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Level of security required for SNMP get or SET.
noSec: no security; all the PDU with a known user id
are accepted
authSet: authentication required for set; all GET
are accepted, but not authenticated SET are
rejected.
authAll: authentication required for SET and GET; not
authenticated SET and GET are rejected.
privSet: authentication required for GET and encryption
required for SET.
privAll: encryption required for SET and GET.
trapOnly: no SNMP GET or SET are accepted."
DEFVAL { noSec }
::= { snmpAgtConfig 1}
snmpAgtCommunityMode OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If the community mode is enabled,
the SNMPv1/v2 packets must use
the community names."
DEFVAL { enabled }
::= { snmpAgtConfig 2 }
--
-- SNMP Agent Epilogue Control Files anchoring
--
snmpAgtCtlFiles OBJECT-IDENTITY
STATUS current
DESCRIPTION
"MIB entity on which to attach the MODULE-IDENTITY for the
Epilogue(R) control files."
::= { alcatelIND1SNMPAgentMIBObjects 3}
--
-- SNMP Source Ip Preferred Configuration
--
snmpAgtSourceIpConfig OBJECT-TYPE
SYNTAX INTEGER {
default (1),
noLoopback0 (2),
ipInterface (3)
}
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The SNMP Agent Configuration
1 -- Default(Loopback0 or closest IP)
2 -- No Loopback0
3 -- Interface IP Specified by User
NOTE: this configuration option has been deprecated.
Please see alaIpServiceSourceIpTable for SNMP Source
IP Preferred Configuration (in ALCATEL-IND1-IP-MIB)."
DEFVAL { default }
::= { alcatelIND1SNMPAgentMIBObjects 4 }
snmpAgtSourceIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The Source IP of SNMP Packets.
NOTE: this configuration option has been deprecated.
Please see alaIpServiceSourceIpTable for SNMP Source
IP Preferred Configuration (in ALCATEL-IND1-IP-MIB)."
::= { alcatelIND1SNMPAgentMIBObjects 5 }
--
-- Compliance Statements
--
alcatelIND1SNMPAgentMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Compliance statement for SNMP Agent Subsystem."
MODULE -- this module
MANDATORY-GROUPS
{
snmpAgtConfigGroup
}
::= { alcatelIND1SNMPAgentMIBCompliances 1 }
--
-- Units Of Conformance
--
snmpAgtConfigGroup OBJECT-GROUP
OBJECTS
{
snmpAgtSecurityLevel,
snmpAgtCommunityMode,
snmpAgtSourceIp,
snmpAgtSourceIpConfig
}
STATUS current
DESCRIPTION
"Collection of objects for SNMP Agent configuration."
::= { alcatelIND1SNMPAgentMIBGroups 1 }
END