mibs/MIBS/nortel/RAPID-IPSEC-TUNNEL-MIB

567 lines
20 KiB
Plaintext
Raw Permalink Normal View History

2023-12-05 12:25:34 +01:00
RAPID-IPSEC-TUNNEL-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, Counter64,
OBJECT-IDENTITY, enterprises,
IpAddress, TimeTicks FROM SNMPv2-SMI
DateAndTime FROM SNMPv2-TC
rapidstream FROM RAPID-MIB;
rsInfoModule MODULE-IDENTITY
LAST-UPDATED "0103061200Z"
ORGANIZATION "WatchGuard Technologies, Inc."
CONTACT-INFO
" Ella Yu
WatchGuard Technologies, Inc.
1841 Zanker Road
San Jose, CA 95112
USA
408-519-4888
ella.yu@watchguard.com "
DESCRIPTION
"The MIB module describes various tunnel objects
of RapidStream system."
REVISION "200104201200Z"
DESCRIPTION
"Initial revision."
REVISION "200211011200Z"
DESCRIPTION
"Changed CONTACT-INFO."
::= { rapidstream 6 }
rsIpsecTunnelMIB OBJECT-IDENTITY
STATUS current
DESCRIPTION
"This is the base object identifier for all tunnel
branches."
::= { rsInfoModule 5 }
rsIpsecTunnel OBJECT-IDENTITY
STATUS current
DESCRIPTION
"This is the base object identifier for all
tunnel information."
::= { rsIpsecTunnelMIB 1 }
rsIpsecTunnelNum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of entries in the rsIpsecTunnelTable. "
::= { rsIpsecTunnel 1 }
rsIpsecTunnelTable OBJECT-TYPE
SYNTAX SEQUENCE OF RSIpsecTunnelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is the connection table describing all current
tunnels exist on this entity."
::= { rsIpsecTunnel 2 }
rsIpsecTunnelEntry OBJECT-TYPE
SYNTAX RSIpsecTunnelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) containing the information on a
tunnel between two security gateways."
INDEX{ rsIpsecTunnelID }
::= { rsIpsecTunnelTable 1 }
RSIpsecTunnelEntry ::= SEQUENCE {
rsIpsecTunnelID Integer32,
rsIpsecTunnelLocalAddr IpAddress,
rsIpsecTunnelPeerAddr IpAddress,
rsIpsecTunnelInSpi Integer32,
rsIpsecTunnelOutSpi Integer32,
rsIpsecTunnelCreateTime DateAndTime,
rsIpsecTunnelDeviceID Unsigned32,
rsIpsecTunnelEspEncryptAlg INTEGER,
rsIpsecTunnelEspAuthAlg INTEGER,
rsIpsecTunnelAhAuthAlg INTEGER,
rsIpsecTunnelMode INTEGER,
rsIpsecTunnelKeyMode INTEGER,
rsIpsecTunnelLifeTime TimeTicks,
rsIpsecTunnelLifeLength Counter32,
rsIpsecTunnelInSaBytes Counter32,
rsIpsecTunnelOutSaBytes Counter32,
rsIpsecTunnelAccSecs Counter32,
rsIpsecTunnelSelectorProtocol INTEGER,
rsIpsecTunnelSelectorRemoteIPType INTEGER,
rsIpsecTunnelSelectorRemoteIPOne IpAddress,
rsIpsecTunnelSelectorRemoteIPTwo IpAddress,
rsIpsecTunnelSelectorRemotePort INTEGER,
rsIpsecTunnelSelectorLocalIPType INTEGER,
rsIpsecTunnelSelectorLocalIPOne IpAddress,
rsIpsecTunnelSelectorLocalIPTwo IpAddress,
rsIpsecTunnelSelectorLocalPort INTEGER,
rsIpsecTunnelNumRekey Counter32,
rsIpsecTunnelInKbytes Counter32,
rsIpsecTunnelOutKbytes Counter32,
rsIpsecTunnelInPackets Counter32,
rsIpsecTunnelOutPackets Counter32,
rsIpsecTunnelInDecryptErrors Counter32,
rsIpsecTunnelInAuthErrors Counter32,
rsIpsecTunnelInReplayErrors Counter32,
rsIpsecTunnelInOtherErrors Counter32,
rsIpsecTunnelOutDecryptErrors Counter32,
rsIpsecTunnelOutAuthErrors Counter32,
rsIpsecTunnelOutReplayErrors Counter32,
rsIpsecTunnelOutOtherErrors Counter32,
rsIpsecTunnelUdpEncap INTEGER,
rsIpsecTunnelPeerUdpPort INTEGER,
rsIpsecTunnelOrigPeerAddr IpAddress
}
rsIpsecTunnelID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The running index of this tunnel."
::= { rsIpsecTunnelEntry 1 }
rsIpsecTunnelLocalAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The local IP address of the current tunnel."
::= { rsIpsecTunnelEntry 2 }
rsIpsecTunnelPeerAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The remote IP address of the current tunnel."
::= { rsIpsecTunnelEntry 3 }
rsIpsecTunnelInSpi OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The security parameters index of inbound SA's within this
tunnel."
::= { rsIpsecTunnelEntry 4 }
rsIpsecTunnelOutSpi OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The security parameters index of outbound SA's within this
tunnel."
::= { rsIpsecTunnelEntry 5 }
rsIpsecTunnelCreateTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The date and time when the tunnel is created."
::= { rsIpsecTunnelEntry 6 }
rsIpsecTunnelDeviceID OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The identifier of target device where the SA resides."
::= { rsIpsecTunnelEntry 7 }
rsIpsecTunnelEspEncryptAlg OBJECT-TYPE
SYNTAX INTEGER {
unknown(0),
des(2),
three-des(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The encryption algorithm used in the tunnel. It's 0
if ESP is not used."
::= { rsIpsecTunnelEntry 8 }
rsIpsecTunnelEspAuthAlg OBJECT-TYPE
SYNTAX INTEGER {
unknown(0),
md5(2),
sha(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The authentication algorithm used in the tunnel. It's
0 if ESP is not used."
::= { rsIpsecTunnelEntry 9 }
rsIpsecTunnelAhAuthAlg OBJECT-TYPE
SYNTAX INTEGER {
unknown(0),
md5(2),
sha(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The AH authentication algorithm used in the tunnel.
It's 0 if AH is not used."
::= { rsIpsecTunnelEntry 10 }
rsIpsecTunnelMode OBJECT-TYPE
SYNTAX INTEGER {
unknown(0),
tunnel(1),
transport(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The tunnel/transport mode of the tunnel."
::= { rsIpsecTunnelEntry 11 }
rsIpsecTunnelKeyMode OBJECT-TYPE
SYNTAX INTEGER {
unknown(0),
manual(1),
auto-ike(2),
other(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The key mode of the tunnel."
::= { rsIpsecTunnelEntry 12 }
rsIpsecTunnelLifeTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The life time (in hundredths of a second) of the tunnel."
::= { rsIpsecTunnelEntry 13 }
rsIpsecTunnelLifeLength OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum traffic in bytes that the tunnel is allowed to support."
::= { rsIpsecTunnelEntry 14 }
rsIpsecTunnelInSaBytes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current active inbound SA bytes of the tunnel."
::= { rsIpsecTunnelEntry 15 }
rsIpsecTunnelOutSaBytes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current active outbound SA bytes of the tunnel."
::= { rsIpsecTunnelEntry 16 }
rsIpsecTunnelAccSecs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of seconds that the tunnel has existed."
::= { rsIpsecTunnelEntry 17 }
rsIpsecTunnelSelectorProtocol OBJECT-TYPE
SYNTAX INTEGER {
any(0),
icmp(1),
igmp(2),
ipip(4),
tcp(6),
egp(8),
pup(12),
udp(17),
idp(22),
tp(29),
ipv6(41),
ipv6-routing(43),
ipv6-fragmentation(44),
rsvp(46),
gre(47),
esp(50),
ah(51),
icmpv6(58),
none(59),
dstopts(60),
mtp(92),
encap(98),
pim(103),
raw(255)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ip protocol number that this SA selector carries, or
0 if it carries any protocol."
::= { rsIpsecTunnelEntry 18 }
rsIpsecTunnelSelectorRemoteIPType OBJECT-TYPE
SYNTAX INTEGER {
ip-addr-single(1),
ip-addr-subnet(2),
ip-addr-range(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of remote IP address of the SA selector in
the entity."
::= { rsIpsecTunnelEntry 19 }
rsIpsecTunnelSelectorRemoteIPOne OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The first remote IP address of the SA selector in the entity.
It's IP address if remote IP of this selector only has one address.
It's IP address of subnet if the remote IP of this selector is IP subnet.
It's the start IP address if the remote IP of this selector
has a range of addresses."
::= { rsIpsecTunnelEntry 20 }
rsIpsecTunnelSelectorRemoteIPTwo OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The second remote IP address of the SA selector in the entity.
It's 0 if remote IP of this selector only has one address.
It's netmask of subnet if the remote IP of this selector is IP subnet.
It's the end IP address if the remote IP of this selector
has a range of addresses."
::= { rsIpsecTunnelEntry 21 }
rsIpsecTunnelSelectorRemotePort OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The remote port used by this selector in the entity."
::= { rsIpsecTunnelEntry 22 }
rsIpsecTunnelSelectorLocalIPType OBJECT-TYPE
SYNTAX INTEGER {
ip-addr-single(1),
ip-addr-subnet(2),
ip-addr-range(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of local IP address of the SA selector in
the entity."
::= { rsIpsecTunnelEntry 23 }
rsIpsecTunnelSelectorLocalIPOne OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The first local IP address of the SA selector in the entity.
It's IP address if local IP of this selector only has one address.
It's IP address of subnet if the local IP of this selector is IP subnet.
It's the start IP address if the local IP of this selector
has a range of IP addresses."
::= { rsIpsecTunnelEntry 24 }
rsIpsecTunnelSelectorLocalIPTwo OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The second local IP address of the SA selector in the entity.
It's 0 if local IP of this selector only has one address.
It's netmask of subnet if the local IP of this selector is IP subnet.
It's the end IP address if the local IP of this selector
has a range of IP addresses."
::= { rsIpsecTunnelEntry 25 }
rsIpsecTunnelSelectorLocalPort OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The local port used by this selector in the entity."
::= { rsIpsecTunnelEntry 26 }
rsIpsecTunnelNumRekey OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of rekeys of the tunnel."
::= { rsIpsecTunnelEntry 27 }
rsIpsecTunnelInKbytes OBJECT-TYPE
SYNTAX Counter32
UNITS "Kbytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total inbound traffic in Kbytes since the establish of
this tunnel."
::= { rsIpsecTunnelEntry 28 }
rsIpsecTunnelOutKbytes OBJECT-TYPE
SYNTAX Counter32
UNITS "Kbytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total outound traffic in Kbytes since the establish of
this connection."
::= { rsIpsecTunnelEntry 29 }
rsIpsecTunnelInPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of inbound packets since the establish of
this connection."
::= { rsIpsecTunnelEntry 30 }
rsIpsecTunnelOutPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of outound packets since the establish of
this connection."
::= { rsIpsecTunnelEntry 31 }
rsIpsecTunnelInDecryptErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of packets discarded due to decryption
error since the establish of this connection."
::= { rsIpsecTunnelEntry 32 }
rsIpsecTunnelInAuthErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of packets discarded due to authentication
error since the establish of this connection."
::= { rsIpsecTunnelEntry 33 }
rsIpsecTunnelInReplayErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of packets discarded due to replay
error since the establish of this connection."
::= { rsIpsecTunnelEntry 34}
rsIpsecTunnelInOtherErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets discarded due to errors
other than decryption, authentication or replay errors. This
may include packets dropped due to a lack of receive
buffers, and may include packets dropped due to congestion
at the decryption element."
::= { rsIpsecTunnelEntry 35 }
rsIpsecTunnelOutDecryptErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of packets discarded due to decryption
error since the establish of this connection."
::= { rsIpsecTunnelEntry 36 }
rsIpsecTunnelOutAuthErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of packets discarded due to authentication
error since the establish of this connection."
::= { rsIpsecTunnelEntry 37 }
rsIpsecTunnelOutReplayErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of packets discarded due to replay
error since the establish of this connection."
::= { rsIpsecTunnelEntry 38 }
rsIpsecTunnelOutOtherErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets discarded due to errors
other than decryption, authentication or replay errors. This
may include packets dropped due to a lack of receive
buffers, and may include packets dropped due to congestion
at the decryption element."
::= { rsIpsecTunnelEntry 39 }
rsIpsecTunnelUdpEncap OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether if UDP encapsulated IPSec has been enabled."
::= { rsIpsecTunnelEntry 40 }
rsIpsecTunnelPeerUdpPort OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The peer's UDP port of current tunnel when UDP encapsulated IPSec
is enabled."
::= { rsIpsecTunnelEntry 41 }
rsIpsecTunnelOrigPeerAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The original peer ip address of current tunnel when UDP encapsulated
IPSec is enabled"
::= { rsIpsecTunnelEntry 42 }
END