mibs/MIBS/pbn/NMS-PROCESS-MIB.MIB

415 lines
12 KiB
Plaintext
Raw Permalink Normal View History

2023-12-05 12:25:34 +01:00
-- *****************************************************************
-- NMS-PROCESS-MIB.my: MIB for CPU and process statistics
--
-- October 2003
--
-- Copyright (c) 2003 by NMS, Inc.
-- All rights reserved.
-- *****************************************************************
--
NMS-PROCESS-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
Counter32,
Gauge32
FROM SNMPv2-SMI
TimeStamp,
DisplayString
FROM SNMPv2-TC
MODULE-COMPLIANCE,
OBJECT-GROUP
FROM SNMPv2-CONF
nmsMgmt
FROM NMS-SMI
-- Unsigned32, EntPhysicalIndexOrZero
-- FROM NMS-TC;
Unsigned32
FROM SNMPv2-SMI
EntPhysicalIndexOrZero
FROM NMS-TC;
nmsProcessMIB MODULE-IDENTITY
LAST-UPDATED "200311060000Z"
ORGANIZATION ""
CONTACT-INFO
""
DESCRIPTION
"The MIB module to describe active system processes."
REVISION "200310160000Z"
DESCRIPTION
"Initial version of this MIB."
::= { nmsMgmt 109 }
-- This MIB displays memory and CPU utilization on nms devices. CPU
-- utilization will give a general idea of how busy the processor is.
-- The numbers are a ratio of the current idle time over the longest
-- idle time. Please note that this information should be used as an
-- estimate only.
nmsProcessMIBObjects OBJECT IDENTIFIER ::= { nmsProcessMIB 1 }
nmspmCPU OBJECT IDENTIFIER ::= { nmsProcessMIBObjects 1 }
nmspmProcess OBJECT IDENTIFIER ::= { nmsProcessMIBObjects 2 }
--NMS CPU Total Table
nmspmCPUTotalTable OBJECT-TYPE
SYNTAX SEQUENCE OF NMSpmCPUTotalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of overall CPU statistics. "
::= { nmspmCPU 1 }
nmspmCPUTotalEntry OBJECT-TYPE
SYNTAX NMSpmCPUTotalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Overall information about the CPU load. Entries in this
table come and go as CPUs are added and removed from the
system."
INDEX { nmspmCPUTotalIndex }
::= { nmspmCPUTotalTable 1 }
NMSpmCPUTotalEntry ::=
SEQUENCE {
nmspmCPUTotalIndex Unsigned32,
nmspmCPUTotalPhysicalIndex EntPhysicalIndexOrZero,
nmspmCPUTotal5sec Gauge32,
nmspmCPUTotal1min Gauge32,
nmspmCPUTotal5min Gauge32
}
nmspmCPUTotalIndex OBJECT-TYPE
SYNTAX Unsigned32 (1.. 4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index that uniquely represents a CPU (or group of CPUs)
whose CPU load information is reported by a row in this table.
This index is assigned arbitrarily by the engine
and is not saved over reboots."
::= { nmspmCPUTotalEntry 1 }
nmspmCPUTotalPhysicalIndex OBJECT-TYPE
SYNTAX EntPhysicalIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The entPhysicalIndex of the physical entity for which
the CPU statistics in this entry are maintained.
The physical entity can be a CPU chip, a group of CPUs,
a CPU card etc. The exact type of this entity is described by
its entPhysicalVendorType value. If the CPU statistics
in this entry correspond to more than one physical entity
(or to no physical entity), or if the entPhysicalTable is
not supported on the SNMP agent, the value of this object
must be zero."
::= { nmspmCPUTotalEntry 2 }
nmspmCPUTotal5sec OBJECT-TYPE
SYNTAX Gauge32 (1..100)
UNITS "percent"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The overall CPU busy percentage in the last 5 second
period. This object is deprecated by nmspmCPUTotal5secRev
which has the changed range of value (0..100)."
::= { nmspmCPUTotalEntry 3 }
nmspmCPUTotal1min OBJECT-TYPE
SYNTAX Gauge32 (1..100)
UNITS "percent"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The overall CPU busy percentage in the last 1 minute
period. This object is deprecated by nmspmCPUTotal1minRev
which has the changed range of value (0..100)."
::= { nmspmCPUTotalEntry 4 }
nmspmCPUTotal5min OBJECT-TYPE
SYNTAX Gauge32 (1..100)
UNITS "percent"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The overall CPU busy percentage in the last 5 minute
period. This object is deprecated by nmspmCPUTotal5minRev
which has the changed range of value (0..100)."
::= { nmspmCPUTotalEntry 5 }
nmspmCPUMaxUtilization OBJECT-TYPE
SYNTAX Gauge32 (1..100)
UNITS "percent"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The max value of nmspmCPUTotal5sec."
::= { nmspmCPU 2 }
nmspmCPUClearMaxUtilization OBJECT-TYPE
SYNTAX INTEGER{clear(1)}
UNITS "percent"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"To clear nmspmCPUMaxUtilization."
::= { nmspmCPU 3 }
-- NMS Processes Common Table
nmspmProcessTable OBJECT-TYPE
SYNTAX SEQUENCE OF NMSpmProcessEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of generic information on all active
processes on this device."
::= { nmspmProcess 1 }
nmspmProcessEntry OBJECT-TYPE
SYNTAX NMSpmProcessEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Generic information about an active process on this
device. Entries in this table come and go as processes are
created and destroyed by the device."
INDEX { nmspmCPUTotalIndex, nmspmProcessPID }
::= { nmspmProcessTable 1 }
NMSpmProcessEntry ::=
SEQUENCE {
nmspmProcessPID
Unsigned32,
nmspmProcessName
DisplayString,
nmspmProcessPriority
INTEGER,
nmspmProcessTimeCreated
TimeStamp
}
nmspmProcessPID OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the process ID. nmspmProcessTimeCreated
should be checked against the last time it was polled,
and if it has changed the PID has been reused and the
entire entry should be polled again. The process IDs
are discrete."
::= { nmspmProcessEntry 1 }
nmspmProcessName OBJECT-TYPE
SYNTAX DisplayString(SIZE(1..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name associated with this process. If the name is
longer than 32 characters, it will be truncated to the first
31 characters, and a `*' will be appended as the last
character to imply this is a truncated process name."
::= { nmspmProcessEntry 2 }
nmspmProcessPriority OBJECT-TYPE
SYNTAX INTEGER {
critical(0),
veryhigh(55),
high(60),
normal(128),
low(180),
verylow(255)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The priority level at which the process is
running. This object is deprecated by
nmspmProcExtPriorityRev."
::= { nmspmProcessEntry 3 }
nmspmProcessTimeCreated OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time when the process was created. The process ID
and the time when the process was created, uniquely
identifies a process."
::= { nmspmProcessEntry 4 }
-- notifications
nmsProcessMIBNotifPrefix OBJECT IDENTIFIER ::= { nmsProcessMIB 2 }
nmsProcessMIBNotifs OBJECT IDENTIFIER ::=
{ nmsProcessMIBNotifPrefix 0 }
-- (no notifications are currently defined)
-- conformance information
nmsProcessMIBConformance OBJECT IDENTIFIER ::= { nmsProcessMIB 3 }
nmspmCompliances OBJECT IDENTIFIER ::= { nmsProcessMIBConformance 1 }
nmspmGroups OBJECT IDENTIFIER ::= { nmsProcessMIBConformance 2 }
nmsProcessMIBCompliance MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for entities which implement
the NMS Process MIB. This is deprecated and new
compliance nmsProcessMIBComplianceRev is added."
MODULE -- this module
MANDATORY-GROUPS { nmspmCPUTotalGroup, nmspmProcessGroup }
GROUP nmspmProcessExtGroup
DESCRIPTION
"The nmspmProcessExtGroup is optional for all entities."
OBJECT nmspmProcExtPriority
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
::= { nmspmCompliances 1 }
nmsProcessMIBComplianceRev MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities which implement
the NMS Process MIB. This compliance module
deprecates nmsProcessMIBCompliance."
MODULE -- this module
MANDATORY-GROUPS { nmspmCPUTotalGroupRev, nmspmProcessGroupRev}
GROUP nmspmProcessExtGroupRev
DESCRIPTION
"The nmspmProcessExtGroupRev is optional for all
entities. This object is defined after deprecating
nmspmProcessExtGroup."
::= { nmspmCompliances 2 }
-- units of conformance
nmspmCPUTotalGroup OBJECT-GROUP
OBJECTS {
nmspmCPUTotalPhysicalIndex,
nmspmCPUTotal5sec,
nmspmCPUTotal1min,
nmspmCPUTotal5min
}
STATUS deprecated
DESCRIPTION
"A collection of objects providing CPU load monitoring
information. This group is mandatory for all nms devices.
This group is deprecated since the objects nmspmCPUTotal5sec,
nmspmCPUTotal1min and nmspmCPUTotal5min are
deprecated. A new object nmspmCPUTotalGroupRev is
added in place of it."
::= { nmspmGroups 1 }
nmspmProcessGroup OBJECT-GROUP
OBJECTS {
nmspmProcessPID,
nmspmProcessName,
nmspmProcessuSecs,
nmspmProcessTimeCreated
}
STATUS deprecated
DESCRIPTION
"A collection of objects providing common process
monitoring information. This group is mandatory for
all nms devices. This object is deprecated
by nmspmProcessGroupRev."
::= { nmspmGroups 2 }
nmspmProcessExtGroup OBJECT-GROUP
OBJECTS {
nmspmProcExtMemAllocated,
nmspmProcExtMemFreed,
nmspmProcExtInvoked,
nmspmProcExtRuntime,
nmspmProcExtUtil5Sec,
nmspmProcExtUtil1Min,
nmspmProcExtUtil5Min,
nmspmProcExtPriority
}
STATUS deprecated
DESCRIPTION
"A collection of objects providing additional and
more detailed process monitoring information. This
group is mandatory for all nms devices that have
the internal capability to keep this information.
This group is deprecated and new group
nmspmProcessExtGroupRev is added."
::= { nmspmGroups 3 }
nmspmCPUTotalGroupRev OBJECT-GROUP
OBJECTS {
nmspmCPUTotalPhysicalIndex,
nmspmCPUTotal5secRev,
nmspmCPUTotal1minRev,
nmspmCPUTotal5minRev
}
STATUS current
DESCRIPTION
"A collection of objects providing CPU load monitoring
information. This group is mandatory for all nms
devices. This group deprecates nmspmCPUTotalGroup."
::= { nmspmGroups 4 }
nmspmProcessExtGroupRev OBJECT-GROUP
OBJECTS {
nmspmProcExtMemAllocatedRev,
nmspmProcExtMemFreedRev,
nmspmProcExtInvokedRev,
nmspmProcExtRuntimeRev,
nmspmProcExtUtil5SecRev,
nmspmProcExtUtil1MinRev,
nmspmProcExtUtil5MinRev,
nmspmProcExtPriorityRev
}
STATUS current
DESCRIPTION
"A collection of objects providing additional and
more detailed process monitoring information. This
group is mandatory for all nms devices that have
the internal capability to keep this information.
This group is formed after deprecating nmspmProcessExtGroup.
nmspmProcExtMemAllocatedRev, nmspmProcExtMemFreedRev,
nmspmProcExtInvokedRev, nmspmProcExtRuntimeRev,
nmspmProcExtUtil5SecRev, nmspmProcExtUtil1MinRev and
nmspmProcExtUtil5MinRev are the new objects added."
::= { nmspmGroups 5 }
nmspmProcessGroupRev OBJECT-GROUP
OBJECTS {
nmspmProcessPID,
nmspmProcessName,
nmspmProcessAverageUSecs,
nmspmProcessTimeCreated
}
STATUS current
DESCRIPTION
"A collection of objects providing common process
monitoring information. This group is mandatory for
all nms devices. This object deprecates
nmspmProcessGroup."
::= { nmspmGroups 6 }
END