david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
main
mibs/MIBS/pbn/NMS-QOS-PIB-MIB.MIB

1999 lines
60 KiB
Plaintext
Raw Permalink Normal View History

Initial commit
2023-12-05 12:25:34 +01:00
-- *****************************************************************
-- NMS-QOS-PIB-MIB.my: MIB for QOS Policy
--
-- October 2003
--
-- Copyright (c) 2003 by NMS, Inc.
-- All rights reserved.
-- *****************************************************************
--
NMS-QOS-PIB-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
Counter64,
IpAddress
FROM SNMPv2-SMI
MODULE-COMPLIANCE,
OBJECT-GROUP
FROM SNMPv2-CONF
TEXTUAL-CONVENTION,
DisplayString,
MacAddress,
TruthValue
FROM SNMPv2-TC
Unsigned32
FROM NMS-TC
nmsPibToMib
FROM NMS-SMI
;
nmsQosPIBMIB MODULE-IDENTITY
LAST-UPDATED "200310160000Z"
ORGANIZATION ""
CONTACT-INFO
""
DESCRIPTION
"The NMS QOS Policy PIB for provisioning QOS policy."
REVISION "200310160000Z"
DESCRIPTION
"Initial version of this MIB."
::= { nmsPibToMib 1 }
-- New textual conventions
--
-- DiffServ Codepoint
--
Dscp ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"An integer that is in the range of the DiffServ codepoint
values."
SYNTAX INTEGER (0..63)
-- Layer 2 CoS
--
QosLayer2Cos ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"An integer that is in the range of the layer 2 CoS values.
This corresponds to the 802.1p and ISL CoS values."
SYNTAX INTEGER (0..7)
-- Supported Queues
--
QueueRange ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"An integer that is limited to the number of queues per
interface supported by the PIB. Limited to 64 which is the
number of codepoints."
SYNTAX INTEGER {
oneQ(1), twoQ(2), threeQ(3), fourQ(4),
eightQ(8), sixteenQ(16), thirtyTwoQ(32), sixtyFourQ(64)
}
-- Supported Thresholds
--
ThresholdSetRange ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"An integer that is limited to the number of threshold sets
per queue supported by the PIB. A threshold set is a
collection of parameters describing queue threshold. The
parameters of a threshold set depend on the drop mechanism the
queue implements. For example, the threshold set for
tail-drop comprises a single parameter, the percentage of
queue size at which dropping occurs. The threshold set for
WRED comprises two parameters; within the range of the two
parameters packets are randomly dropped."
SYNTAX INTEGER {
zeroT(0), oneT(1), twoT(2), fourT(4), eightT(8)
}
-- Percentage for thresholds, etc.
--
Percent ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"An integer that is in the range of a percent value."
SYNTAX INTEGER (0..100)
-- Interface types
--
QosInterfaceQueueType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"An enumerated type for all the known interface types. The
interface types are currently limited to a predefined
combination of queues and thresholds such that the product of
queues and thresholds does not exceed 64 (i.e., the total
number of DSCPs."
SYNTAX INTEGER {
oneQ1t(1), oneQ2t(2), oneQ4t(3), oneQ8t(4),
twoQ1t(5), twoQ2t(6), twoQ4t(7), twoQ8t(8),
threeQ1t(9), threeQ2t(10), threeQ4t(11), threeQ8t(12),
fourQ1t(13), fourQ2t(14), fourQ4t(15), fourQ8t(16),
eightQ1t(17), eightQ2t(18), eightQ4t(19), eightQ8t(20),
sixteenQ1t(21), sixteenQ2t(22), sixteenQ4t(23),
sixtyfourQ1t(24), sixtyfourQ2t(25), sixtyfourQ4t(26),
oneP1Q0t(27), oneP1Q4t(28), oneP1Q8t(29), oneP2Q1t(30),
oneP2Q2t(31), oneP3Q1t(32), oneP7Q8t(33)
}
QosInterfaceTypeCapabilities ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"An enumeration of interface capabilities. Used by the PDP to
select policies and configuration to push to the PEP."
SYNTAX BITS {
unspecified (0),
-- Classification support
inputL2Classification (1), inputIpClassification (2),
outputL2Classification (3), outputIpClassification (4),
inputPortClassification (19), outputPortClassification (20),
-- Policing support
inputUflowPolicing (5), inputAggregatePolicing (6),
outputUflowPolicing (7), outputAggregatePolicing (8),
policeByMarkingDown (9), policeByDropping (10),
inputUflowShaping (21), inputAggregateShaping (22),
outputUflowShaping (23), outputAggregateShaping (24),
-- Supported scheduling mechanisms
fifo (11), wrr (12), wfq (13), cq (14), pq (15), cbwfq (16),
pqWrr (25), pqCbwfq (26),
-- Supported congestion control mechanisms
tailDrop (17), wred (18)
}
-- Role
--
-- This TC is commented out since it is not actually used in this
-- PIB. Nevertheless, the size and character restrictions must still
-- be enforced
--
-- Role ::= TEXTUAL-CONVENTION
-- STATUS current
-- DESCRIPTION
-- "A display string where valid letters are a-z, A-Z, 0-9,
-- ., - and _. Name can not start with an '_'.
-- SYNTAX OCTET STRING (SIZE (1..31))
-- Role Combination
--
RoleCombination ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A Display string consisting of a set of roles concatenated
with a '+' character where the roles are in lexicographic
order from minimum to maximum."
SYNTAX OCTET STRING (SIZE (0..255))
-- Policy Instance Index
--
PolicyInstanceId ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A textual convention for an attribute that is an an
unsigned integer index attribute of class. It is used for
attributes that exist for the purpose of providing an integer
index of an instance.
For any integer index that refers to another policy instance,
that other policy instance must exist. Furthermore, it is an
error to try to delete a policy instance that is referred to by
another instance without first deleting the referring
instance."
SYNTAX Unsigned32
-- Unsigned 64 bit integer
--
Unsigned64 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"An unsigned 64 bit integer. We use SYNTAX Counter64 for the
enconding rules."
SYNTAX Counter64
--
-- Object identifier for conformance statements
--
qosPIBConformance OBJECT IDENTIFIER ::= { nmsQosPIBMIB 1 }
--
-- Device Config.
--
-- This group contains device configuration information. This
-- configuration is either set by management or reflects the physical
-- configuration of the device. This configuration is generally
-- reported to the PDP (i.e., the policy server so that the PDP can
-- determine what policies to download to the PEP (i.e., the device).
qosDeviceConfig OBJECT IDENTIFIER ::= { nmsQosPIBMIB 2 }
qosDevicePibIncarnationTable OBJECT-TYPE
SYNTAX SEQUENCE OF QosDevicePibIncarnationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This class contains a single policy instance that identifies
the current incarnation of the PIB and the PDP that installed
this incarnation. The instance of this class is reported to
the PDP at client connect time so that the PDP can (attempt
to) ascertain the current state of the PIB."
::= { qosDeviceConfig 1 }
qosDevicePibIncarnationEntry OBJECT-TYPE
SYNTAX QosDevicePibIncarnationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The single policy instance of this class identifies the
current incarnation of the PIB and the PDP that installed
this incarnation."
INDEX { qosDeviceIncarnationId }
::= { qosDevicePibIncarnationTable 1 }
QosDevicePibIncarnationEntry ::= SEQUENCE {
qosDeviceIncarnationId PolicyInstanceId,
qosDevicePdpName DisplayString,
qosDevicePibIncarnation OCTET STRING,
qosDevicePibTtl Unsigned32
}
qosDeviceIncarnationId OBJECT-TYPE
SYNTAX PolicyInstanceId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An integer index to identify the instance of the policy class."
::= { qosDevicePibIncarnationEntry 1 }
qosDevicePdpName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the PDP that installed the current incarnation of
the PIB into the device. By default it is the zero length
string."
::= { qosDevicePibIncarnationEntry 2 }
qosDevicePibIncarnation OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An octet string to identify the current incarnation. It has
meaning to the PDP that installed the PIB and perhaps its
standby PDPs. By default the empty string."
::= { qosDevicePibIncarnationEntry 3 }
qosDevicePibTtl OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of seconds after a client close or TCP timeout for
which the PEP continues to enforce the policy in the PIB.
After this interval, the PIB is consired expired and the
device no longer enforces the policy installed in the PIB."
::= { qosDevicePibIncarnationEntry 4 }
qosDeviceAttributeTable OBJECT-TYPE
SYNTAX SEQUENCE OF QosDeviceAttributeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The single instance of this class indicates specific
attributes of the device. These include configuration values
such as the configured PDP addresses, the maximum message
size, and specific device capabilities. The latter include
input port-based and output port-based classification and/or
policing, support for flow based policing, aggregate based
policing, traffic shaping capabilities, etc."
::= { qosDeviceConfig 2 }
qosDeviceAttributeEntry OBJECT-TYPE
SYNTAX QosDeviceAttributeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The single instance of this class indicates specific
attributes of the device."
INDEX { qosDeviceAttributeId }
::= { qosDeviceAttributeTable 1 }
QosDeviceAttributeEntry ::= SEQUENCE {
qosDeviceAttributeId PolicyInstanceId,
qosDevicePepDomain DisplayString,
qosDevicePrimaryPdp IpAddress,
qosDeviceSecondaryPdp IpAddress,
qosDeviceMaxMessageSize Unsigned32,
qosDeviceCapabilities BITS
}
qosDeviceAttributeId OBJECT-TYPE
SYNTAX PolicyInstanceId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An integer index to identify the instance of the policy class."
::= { qosDeviceAttributeEntry 1 }
qosDevicePepDomain OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The QoS domain that this device belongs to. This is
configured locally on the device (perhaps by some management
protocol such as SNMP). By default, it is the zero-length
string."
::= { qosDeviceAttributeEntry 2 }
qosDevicePrimaryPdp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address of the PDP configured to be the primary PDP for
the device."
::= { qosDeviceAttributeEntry 3 }
qosDeviceSecondaryPdp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address of the PDP configured to be the secondary PDP for
the device. An address of zero indicates no secondary is
configured."
::= { qosDeviceAttributeEntry 4 }
qosDeviceMaxMessageSize OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum size message that this PEP is capable of
receiving in bytes. A value of zero means that the maximum
message size is unspecified (but does not mean it is
unlimited). A message greater than this maximum results in a
MessageTooBig error on a 'no commit' REP."
::= { qosDeviceAttributeEntry 5 }
qosDeviceCapabilities OBJECT-TYPE
SYNTAX BITS {
unspecified (0),
-- QoS labels supported
layer2Cos (1), ipPrecedence (2), dscp (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An enumeration of device capabilities. Used by the PDP to
select policies and configuration to push to the PEP."
::= { qosDeviceAttributeEntry 6 }
qosInterfaceTypeTable OBJECT-TYPE
SYNTAX SEQUENCE OF QosInterfaceTypeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This class describes the interface types of the interfaces
that exist on the device. It includes the queue type, role
combination and capabilities of interfaces. The PEP does not
report which specific interfaces have which characteristics."
::= { qosDeviceConfig 3 }
qosInterfaceTypeEntry OBJECT-TYPE
SYNTAX QosInterfaceTypeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An instance of this class describes a role combination for
an interface type of an interface that exists on the device."
INDEX { qosInterfaceTypeId }
::= { qosInterfaceTypeTable 1 }
QosInterfaceTypeEntry ::= SEQUENCE {
qosInterfaceTypeId PolicyInstanceId,
qosInterfaceQueueType QosInterfaceQueueType,
qosInterfaceTypeRoles RoleCombination,
qosInterfaceTypeCapabilities QosInterfaceTypeCapabilities
}
qosInterfaceTypeId OBJECT-TYPE
SYNTAX PolicyInstanceId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An integer index to identify the instance of the policy class."
::= { qosInterfaceTypeEntry 1 }
qosInterfaceQueueType OBJECT-TYPE
SYNTAX QosInterfaceQueueType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface type in terms of number of queues and
thresholds."
::= { qosInterfaceTypeEntry 2 }
qosInterfaceTypeRoles OBJECT-TYPE
SYNTAX RoleCombination
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A combination of roles on at least one interface of type
qosInterfaceType."
::= { qosInterfaceTypeEntry 3 }
qosInterfaceTypeCapabilities OBJECT-TYPE
SYNTAX QosInterfaceTypeCapabilities
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An enumeration of interface capabilities. Used by the PDP to
select policies and configuration to push to the PEP."
::= { qosInterfaceTypeEntry 4 }
--
-- General Config for the entire domain.
--
-- Table of DiffServ codepoint mappings
-- Maps DSCP to marked-down DSCP, IP precedence and CoS
qosDomainConfig OBJECT IDENTIFIER ::= { nmsQosPIBMIB 3 }
qosDiffServMappingTable OBJECT-TYPE
SYNTAX SEQUENCE OF QosDiffServMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Maps each DSCP to a marked-down DSCP. Also maps each DSCP to
an IP precedence and QosLayer2Cos. When configured for the
first time, all 64 entries of the table must be
specified. Thereafter, instances may be modified (with a
delete and install in a single decision) but not deleted
unless all instances are deleted."
::= { qosDomainConfig 1 }
qosDiffServMappingEntry OBJECT-TYPE
SYNTAX QosDiffServMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An instance of this class represents mappings from a DSCP."
INDEX { qosDscp }
::= { qosDiffServMappingTable 1 }
QosDiffServMappingEntry ::= SEQUENCE {
qosDscp Dscp,
qosMarkedDscp Dscp,
qosL2Cos QosLayer2Cos
}
qosDscp OBJECT-TYPE
SYNTAX Dscp
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A DSCP for which this entry contains mappings."
::= { qosDiffServMappingEntry 1 }
qosMarkedDscp OBJECT-TYPE
SYNTAX Dscp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The DSCP to use instead of the qosDscp when the packet is out
of profile and hence marked as such."
::= { qosDiffServMappingEntry 2 }
qosL2Cos OBJECT-TYPE
SYNTAX QosLayer2Cos
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The L2 CoS value to use when mapping this DSCP to layer 2
CoS."
::= { qosDiffServMappingEntry 3 }
-- Table of Layer 2 CoS to DSCP mappings
--
qosCosToDscpTable OBJECT-TYPE
SYNTAX SEQUENCE OF QosCosToDscpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Maps each of eight CoS values to a DSCP. When configured for
the first time, all 8 entries of the table must be
specified. Thereafter, instances may be modified (with a
delete and install in a single decision) but not deleted
unless all instances are deleted."
::= { qosDomainConfig 2 }
qosCosToDscpEntry OBJECT-TYPE
SYNTAX QosCosToDscpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An instance of this class maps a CoS value to a DSCP."
INDEX { qosCosToDscpCos }
::= { qosCosToDscpTable 1 }
QosCosToDscpEntry ::= SEQUENCE {
qosCosToDscpCos QosLayer2Cos,
qosCosToDscpDscp Dscp
}
qosCosToDscpCos OBJECT-TYPE
SYNTAX QosLayer2Cos
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The L2 CoS value that is being mapped."
::= { qosCosToDscpEntry 1 }
qosCosToDscpDscp OBJECT-TYPE
SYNTAX Dscp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The DSCP value to use when mapping the L2 CoS to a DSCP."
::= { qosCosToDscpEntry 2 }
--
-- The Unmatched Policy Table
--
-- This group specifies the policy to apply to an interface for a
-- given role combination where no other policy matches. More
-- specifically, the unmatched policy is what is applied to non-IP
-- packets for which there is no MAC classification, or what is
-- applied to IP packets that do not match any ACE in any ACL applied
-- to the interface.
qosUnmatchedPolicy OBJECT IDENTIFIER ::= { nmsQosPIBMIB 4 }
qosUnmatchedPolicyTable OBJECT-TYPE
SYNTAX SEQUENCE OF QosUnmatchedPolicyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A policy class that specifies what QoS to apply to a packet
that does not match any other policy configured for this role
combination for a particular direction of traffic."
::= { qosUnmatchedPolicy 1 }
qosUnmatchedPolicyEntry OBJECT-TYPE
SYNTAX QosUnmatchedPolicyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An instance of this class specifies the unmatched policy
for a particular role combination for incoming or outgoing
traffic."
INDEX { qosUnmatchedPolicyId }
::= { qosUnmatchedPolicyTable 1 }
QosUnmatchedPolicyEntry ::= SEQUENCE {
qosUnmatchedPolicyId PolicyInstanceId,
qosUnmatchedPolicyRole RoleCombination,
qosUnmatchedPolicyDirection INTEGER,
qosUnmatchedPolicyDscp Dscp,
qosUnmatchedPolicyDscpTrusted TruthValue,
qosUnmatchPolMicroFlowPolicerId PolicyInstanceId,
qosUnmatchedPolicyAggregateId PolicyInstanceId
}
qosUnmatchedPolicyId OBJECT-TYPE
SYNTAX PolicyInstanceId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An integer index to identify the instance of the policy class."
::= { qosUnmatchedPolicyEntry 1 }
qosUnmatchedPolicyRole OBJECT-TYPE
SYNTAX RoleCombination
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Role combination for which this instance applies."
::= { qosUnmatchedPolicyEntry 2 }
qosUnmatchedPolicyDirection OBJECT-TYPE
SYNTAX INTEGER { in(0), out(1) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The direction of packet flow at the interface in question to
which this instance applies."
::= { qosUnmatchedPolicyEntry 3 }
qosUnmatchedPolicyDscp OBJECT-TYPE
SYNTAX Dscp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The DSCP to classify the unmatched packet with. This must be
specified even if qosUnmatchedPolicyDscpTrusted is true."
::= { qosUnmatchedPolicyEntry 4 }
qosUnmatchedPolicyDscpTrusted OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If this attribute is true, then the Dscp associated with the
packet is trusted, i.e., it is assumed to have already been
set. In this case, the Dscp is not rewritten with
qosUnmatchedPolicyDscp (qosUnmatchedPolicyDscp is ignored)
unless this is a non-IP packet and arrives untagged. The
packet is still policed as part of its micro flow and its
aggregate flow.
When a trusted action is applied to an input interface, the
Dscp (for an IP packet) or CoS (for a non-IP packet)
associated with the packet is the one contained in the packet.
When a trusted action is applied to an output interface, the
Dscp associated with the packet is the one that is the result
of the input classification and policing."
::= { qosUnmatchedPolicyEntry 5 }
qosUnmatchPolMicroFlowPolicerId OBJECT-TYPE
SYNTAX PolicyInstanceId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An index identifying the instance of policer to apply to
unmatched packets. It must correspond to the integer index of
an instance of class qosPolicerTable or be zero. If zero, the
microflow is not policed."
::= { qosUnmatchedPolicyEntry 6 }
qosUnmatchedPolicyAggregateId OBJECT-TYPE
SYNTAX PolicyInstanceId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An index identifying the aggregate that the packet belongs
to. It must correspond to the integer index of an instance of
class qosAggregateTable or be zero. If zero, the microflow
does not belong to any aggregate and is not policed as part of
any aggregate."
::= { qosUnmatchedPolicyEntry 7 }
--
-- The Policer Group
--
-- This group specifies policer parameters that can then be used by
-- other groups such as the IP ACL Actions, or the unmatched policy.
-- This group also defines aggregates that flows can then be assigned
-- to.
qosPolicer OBJECT IDENTIFIER ::= { nmsQosPIBMIB 5 }
-- The Policer Definition Table
--
qosPolicerTable OBJECT-TYPE
SYNTAX SEQUENCE OF QosPolicerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A class specifying policing parameters for both microflows
and aggregate flows. This table is designed for policing
according to a token bucket scheme where an average rate and
burst size is specified."
::= { qosPolicer 1 }
qosPolicerEntry OBJECT-TYPE
SYNTAX QosPolicerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An instance of this class specifies a set of policing
parameters."
INDEX { qosPolicerId }
::= { qosPolicerTable 1 }
QosPolicerEntry ::= SEQUENCE {
qosPolicerId PolicyInstanceId,
qosPolicerRate Unsigned64,
qosPolicerNormalBurst Unsigned32,
qosPolicerExcessBurst Unsigned32,
qosPolicerAction INTEGER
}
qosPolicerId OBJECT-TYPE
SYNTAX PolicyInstanceId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An integer index to identify the instance of the policy class."
::= { qosPolicerEntry 1 }
qosPolicerRate OBJECT-TYPE
SYNTAX Unsigned64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The token rate. It is specified in units of bit/s. A rate of
zero means that all packets will be out of profile. If the
qosPolicerAction is set to drop then this effectively
denies any service to packets policed by this policer."
::= { qosPolicerEntry 2 }
qosPolicerNormalBurst OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The normal size of a burst in terms of bits."
::= { qosPolicerEntry 3 }
qosPolicerExcessBurst OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The excess size of a burst in terms of bits."
::= { qosPolicerEntry 4 }
qosPolicerAction OBJECT-TYPE
SYNTAX INTEGER { drop(0), mark(1), shape(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An indication of how to handle out of profile packets. When
the shape action is chosen then traffic is shaped to the rate
specified by qosPolicerRate."
::= { qosPolicerEntry 5 }
-- The Aggregate Table
--
qosAggregateTable OBJECT-TYPE
SYNTAX SEQUENCE OF QosAggregateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Instances of this class identify aggregate flows and the
policer to apply to each."
::= { qosPolicer 2 }
qosAggregateEntry OBJECT-TYPE
SYNTAX QosAggregateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An instance of this class specifies the policer to apply to
an aggregate flow."
INDEX { qosAggregateId }
::= { qosAggregateTable 1 }
QosAggregateEntry ::= SEQUENCE {
qosAggregateId PolicyInstanceId,
qosAggregatePolicerId PolicyInstanceId
}
qosAggregateId OBJECT-TYPE
SYNTAX PolicyInstanceId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An integer index to identify the instance of the policy class."
::= { qosAggregateEntry 1 }
qosAggregatePolicerId OBJECT-TYPE
SYNTAX PolicyInstanceId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An index identifying the instance of policer to apply to the
aggregate. It must correspond to the integer index of an
instance of class qosPolicerTable."
::= { qosAggregateEntry 2 }
--
-- MAC DA Classification Group
--
-- This group determines the CoS to assign to a MAC frame on the
-- basis of the destination MAC address. There is no provision for
-- policing or rate limiting at layer 2.
qosMacQos OBJECT IDENTIFIER ::= { nmsQosPIBMIB 6 }
qosMacClassificationTable OBJECT-TYPE
SYNTAX SEQUENCE OF QosMacClassificationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A class of MAC/Vlan tuples and their associated CoS values."
::= { qosMacQos 1 }
qosMacClassificationEntry OBJECT-TYPE
SYNTAX QosMacClassificationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An instance of this class specifies the mapping of a VLAN
and a MAC address to a CoS value."
INDEX { qosMacClassificationId }
::= { qosMacClassificationTable 1 }
QosMacClassificationEntry ::= SEQUENCE {
qosMacClassificationId PolicyInstanceId,
qosDstMacVlan INTEGER,
qosDstMacAddress MacAddress,
qosDstMacCos QosLayer2Cos
}
qosMacClassificationId OBJECT-TYPE
SYNTAX PolicyInstanceId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An integer index to identify the instance of the policy class."
::= { qosMacClassificationEntry 1 }
qosDstMacVlan OBJECT-TYPE
SYNTAX INTEGER (1..4095)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN of the destination MAC address of the L2 frame."
::= { qosMacClassificationEntry 2 }
qosDstMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination MAC address of the L2 frame."
::= { qosMacClassificationEntry 3 }
qosDstMacCos OBJECT-TYPE
SYNTAX QosLayer2Cos
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The CoS to assign the packet with the associated MAC/VLAN
tuple. Note that this CoS is overridden by the policies to
classify the frame at layer 3 if there are any."
::= { qosMacClassificationEntry 4 }
--
-- The IP Classification and Policing Group
--
qosIpQos OBJECT IDENTIFIER ::= { nmsQosPIBMIB 7 }
-- The ACE Table
--
qosIpAceTable OBJECT-TYPE
SYNTAX SEQUENCE OF QosIpAceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ACE definitions."
::= { qosIpQos 1 }
qosIpAceEntry OBJECT-TYPE
SYNTAX QosIpAceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An instance of this class specifies an ACE."
INDEX { qosIpAceId }
::= { qosIpAceTable 1 }
QosIpAceEntry ::= SEQUENCE {
qosIpAceId PolicyInstanceId,
qosIpAceDstAddr IpAddress,
qosIpAceDstAddrMask IpAddress,
qosIpAceSrcAddr IpAddress,
qosIpAceSrcAddrMask IpAddress,
qosIpAceDscpMin Dscp,
qosIpAceDscpMax Dscp,
qosIpAceProtocol INTEGER,
qosIpAceDstL4PortMin INTEGER,
qosIpAceDstL4PortMax INTEGER,
qosIpAceSrcL4PortMin INTEGER,
qosIpAceSrcL4PortMax INTEGER,
qosIpAcePermit TruthValue
}
qosIpAceId OBJECT-TYPE
SYNTAX PolicyInstanceId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An integer index to identify the instance of the policy class."
::= { qosIpAceEntry 1 }
qosIpAceDstAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address to match against the packet's destination IP
address."
::= { qosIpAceEntry 2 }
qosIpAceDstAddrMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A mask for the matching of the destination IP address."
::= { qosIpAceEntry 3 }
qosIpAceSrcAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address to match against the packet's source IP
address."
::= { qosIpAceEntry 4 }
qosIpAceSrcAddrMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A mask for the matching of the source IP address."
::= { qosIpAceEntry 5 }
qosIpAceDscpMin OBJECT-TYPE
SYNTAX Dscp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum value that the DSCP in the packet can have and
match this ACE."
::= { qosIpAceEntry 6 }
qosIpAceDscpMax OBJECT-TYPE
SYNTAX Dscp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum value that the DSCP in the packet can have and
match this ACE."
::= { qosIpAceEntry 7 }
qosIpAceProtocol OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP protocol to match against the packet's protocol.
A value of zero means match all."
::= { qosIpAceEntry 8 }
qosIpAceDstL4PortMin OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum value that the packet's layer 4 dest port number
can have and match this ACE."
::= { qosIpAceEntry 9 }
qosIpAceDstL4PortMax OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum value that the packet's layer 4 dest port number
can have and match this ACE."
::= { qosIpAceEntry 10 }
qosIpAceSrcL4PortMin OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum value that the packet's layer 4 source port
number can have and match this ACE."
::= { qosIpAceEntry 11 }
qosIpAceSrcL4PortMax OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum value that the packet's layer 4 source port
number can have and match this ACE."
::= { qosIpAceEntry 12 }
qosIpAcePermit OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If the packet matches this ACE and the value of this attribute
is true, then the matching process terminates and the QoS
associated with this ACE (indirectly through the ACL) is
applied to the packet. If the value of this attribute is false,
then no more ACEs in this ACL are compared to this packet and
matching continues with the first ACE of the next ACL."
::= { qosIpAceEntry 13 }
-- The ACL Definition Table
--
qosIpAclDefinitionTable OBJECT-TYPE
SYNTAX SEQUENCE OF QosIpAclDefinitionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A class that defines a set of ACLs each being an ordered list
of ACEs."
::= { qosIpQos 2 }
qosIpAclDefinitionEntry OBJECT-TYPE
SYNTAX QosIpAclDefinitionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An instance of this class specifies an ACE in an ACL and its
order with respect to other ACEs in the same ACL."
INDEX { qosIpAclDefinitionId }
::= { qosIpAclDefinitionTable 1 }
QosIpAclDefinitionEntry ::= SEQUENCE {
qosIpAclDefinitionId PolicyInstanceId,
qosIpAclId PolicyInstanceId,
qosIpAceOrder Unsigned32,
qosIpAclDefAceId PolicyInstanceId
}
qosIpAclDefinitionId OBJECT-TYPE
SYNTAX PolicyInstanceId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An integer index to identify the instance of the policy class."
::= { qosIpAclDefinitionEntry 1 }
qosIpAclId OBJECT-TYPE
SYNTAX PolicyInstanceId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An index for this ACL. There will be one instance of
policy class qosIpAclDefinition with this integer index for
each ACE in the ACL per role combination."
::= { qosIpAclDefinitionEntry 2 }
qosIpAceOrder OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An integer that determines the position of this ACE in the ACL.
An ACE with a given order is positioned in the access contol
list before one with a higher order."
::= { qosIpAclDefinitionEntry 3 }
qosIpAclDefAceId OBJECT-TYPE
SYNTAX PolicyInstanceId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute specifies the ACE in the qosIpAceTable that is
in the ACL specified by qosIpAclId at the position specified
by qosIpAceOrder."
::= { qosIpAclDefinitionEntry 4 }
-- The ACL Action Table
--
qosIpAclActionTable OBJECT-TYPE
SYNTAX SEQUENCE OF QosIpAclActionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A class that applies a set of ACLs to interfaces specifying,
for each interface the order of the ACL with respect to other
ACLs applied to the same interface and, for each ACL the
action to take for a packet that matches a permit ACE in that
ACL. Interfaces are specified abstractly in terms of
interface role combinations."
::= { qosIpQos 3 }
qosIpAclActionEntry OBJECT-TYPE
SYNTAX QosIpAclActionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An instance of this class applies an ACL to traffic in a
particular direction on an interface with a particular role
combination, and specifies the action for packets which match
the ACL."
INDEX { qosIpAclActionId }
::= { qosIpAclActionTable 1 }
QosIpAclActionEntry ::= SEQUENCE {
qosIpAclActionId PolicyInstanceId,
qosIpAclActAclId PolicyInstanceId,
qosIpAclInterfaceRoles RoleCombination,
qosIpAclInterfaceDirection INTEGER,
qosIpAclOrder Unsigned32,
qosIpAclDscp Dscp,
qosIpAclDscpTrusted TruthValue,
qosIpAclMicroFlowPolicerId PolicyInstanceId,
qosIpAclAggregateId PolicyInstanceId
}
qosIpAclActionId OBJECT-TYPE
SYNTAX PolicyInstanceId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An integer index to identify the instance of the policy class."
::= { qosIpAclActionEntry 1 }
qosIpAclActAclId OBJECT-TYPE
SYNTAX PolicyInstanceId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ACL associated with this action."
::= { qosIpAclActionEntry 2 }
qosIpAclInterfaceRoles OBJECT-TYPE
SYNTAX RoleCombination
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interfaces to which this ACL applies specified in terms
of a set of roles."
::= { qosIpAclActionEntry 3 }
qosIpAclInterfaceDirection OBJECT-TYPE
SYNTAX INTEGER { in(0), out(1) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The direction of packet flow at the interface in question to
which this ACL applies."
::= { qosIpAclActionEntry 4 }
qosIpAclOrder OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An integer that determines the order of this ACL in the list
of ACLs applied to interfaces of the specified role
combination. An ACL with a given order is positioned in the
list before one with a higher order."
::= { qosIpAclActionEntry 5 }
qosIpAclDscp OBJECT-TYPE
SYNTAX Dscp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The DSCP to classify the packet with in the event that the
packet matches an ACE in this ACL and the ACE is a permit."
::= { qosIpAclActionEntry 6 }
qosIpAclDscpTrusted OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If this attribute is true, then the Dscp associated with
the packet is trusted, i.e., it is assumed to have already
been set. In this case, the Dscp is not rewritten with
qosIpAclDscp (qosIpAclDscp is ignored). The packet is still
policed as part of its micro flow and its aggregate flow.
When a trusted action is applied to an input interface, the
Dscp associated with the packet is the one contained in the
packet. When a trusted action is applied to an output
interface, the Dscp associated with the packet is the one that
is the result of the input classification and policing."
::= { qosIpAclActionEntry 7 }
qosIpAclMicroFlowPolicerId OBJECT-TYPE
SYNTAX PolicyInstanceId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An index identifying the instance of policer to apply to the
microflow. It must correspond to the integer index of an
instance of class qosPolicerTableor be zero. If zero, the
microflow is not policed."
::= { qosIpAclActionEntry 8 }
qosIpAclAggregateId OBJECT-TYPE
SYNTAX PolicyInstanceId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An index identifying the aggregate that the packet belongs
to. It must correspond to the integer index of an instance of
class qosAggregateTable or be zero. If zero, the microflow
does not belong to any aggregate and is not policed as part of
any aggregate."
::= { qosIpAclActionEntry 9 }
--
-- QoS Interface Group
--
-- This group specifies the configuration of the various interface
-- types including the setting of thresholds, queueing parameters,
-- mapping of DSCPs to queues and thresholds, etc.
qosIfParameters OBJECT IDENTIFIER ::= { nmsQosPIBMIB 8 }
-- Table of scheduling discipline preferences
--
qosIfSchedulingPreferencesTable OBJECT-TYPE
SYNTAX SEQUENCE OF QosIfSchedulingPreferenceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This class specifies the scheduling preference an interface
chooses if it supports multiple scheduling types. Higher
values are preferred over lower values."
::= { qosIfParameters 1 }
qosIfSchedulingPreferenceEntry OBJECT-TYPE
SYNTAX QosIfSchedulingPreferenceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An instance of this class specifies a scheduling preference
for a queue-type on an interface with a particular role
combination."
INDEX { qosIfSchedulingPreferenceId }
::= { qosIfSchedulingPreferencesTable 1 }
QosIfSchedulingPreferenceEntry ::= SEQUENCE {
qosIfSchedulingPreferenceId PolicyInstanceId,
qosIfSchedulingRoles RoleCombination,
qosIfSchedulingPreference INTEGER,
qosIfSchedulingDiscipline INTEGER,
qosIfSchedulingQueueType QosInterfaceQueueType
}
qosIfSchedulingPreferenceId OBJECT-TYPE
SYNTAX PolicyInstanceId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An integer index to identify the instance of the policy class."
::= { qosIfSchedulingPreferenceEntry 1 }
qosIfSchedulingRoles OBJECT-TYPE
SYNTAX RoleCombination
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The combination of roles the interface must have for this
policy instance to apply to that interface."
::= { qosIfSchedulingPreferenceEntry 2 }
qosIfSchedulingPreference OBJECT-TYPE
SYNTAX INTEGER (1..16)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The preference to use this scheduling discipline and queue
type. A higher value means a higher preference. If two
disciplines have the same preference the choice is a local
decision."
::= { qosIfSchedulingPreferenceEntry 3 }
qosIfSchedulingDiscipline OBJECT-TYPE
SYNTAX INTEGER {
weightedFairQueueing (1),
weightedRoundRobin (2),
customQueueing (3),
priorityQueueing (4),
classBasedWFQ (5),
fifo (6),
pqWrr (7),
pqCbwfq (8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An enumerate type for all the known scheduling disciplines."
::= { qosIfSchedulingPreferenceEntry 4 }
qosIfSchedulingQueueType OBJECT-TYPE
SYNTAX QosInterfaceQueueType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The queue type of this preference."
::= { qosIfSchedulingPreferenceEntry 5 }
-- Table of drop mechanism preferences
--
qosIfDropPreferenceTable OBJECT-TYPE
SYNTAX SEQUENCE OF QosIfDropPreferenceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This class specifies the preference of the drop mechanism an
interface chooses if it supports multiple drop mechanisms.
Higher values are preferred over lower values."
::= { qosIfParameters 2 }
qosIfDropPreferenceEntry OBJECT-TYPE
SYNTAX QosIfDropPreferenceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An instance of this class specifies a drop preference for
a drop mechanism on an interface with a particular role
combination."
INDEX { qosIfDropPreferenceId }
::= { qosIfDropPreferenceTable 1 }
QosIfDropPreferenceEntry ::= SEQUENCE {
qosIfDropPreferenceId PolicyInstanceId,
qosIfDropRoles RoleCombination,
qosIfDropPreference INTEGER,
qosIfDropDiscipline INTEGER
}
qosIfDropPreferenceId OBJECT-TYPE
SYNTAX PolicyInstanceId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An integer index to identify the instance of the policy class."
::= { qosIfDropPreferenceEntry 1 }
qosIfDropRoles OBJECT-TYPE
SYNTAX RoleCombination
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The combination of roles the interface must have for this
policy instance to apply to that interface."
::= { qosIfDropPreferenceEntry 2 }
qosIfDropPreference OBJECT-TYPE
SYNTAX INTEGER (1..16)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The preference to use this drop mechanism. A higher value
means a higher preference. If two mechanisms have the same
preference the choice is a local decision."
::= { qosIfDropPreferenceEntry 3 }
qosIfDropDiscipline OBJECT-TYPE
SYNTAX INTEGER {
qosIfDropWRED (1),
qosIfDropTailDrop (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An enumerate type for all the known drop mechanisms."
::= { qosIfDropPreferenceEntry 4 }
-- The Assignment of DSCPs to queues and thresholds for each interface
-- type.
--
qosIfDscpAssignmentTable OBJECT-TYPE
SYNTAX SEQUENCE OF QosIfDscpAssignmentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The assignment of each DSCP to a queue and threshold for each
interface queue type."
::= { qosIfParameters 3 }
qosIfDscpAssignmentEntry OBJECT-TYPE
SYNTAX QosIfDscpAssignmentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An instance of this class specifies the queue and threshold
set for a packet with a particular DSCP on an interface of
a particular type with a particular role combination."
INDEX { qosIfDscpAssignmentId }
::= { qosIfDscpAssignmentTable 1 }
QosIfDscpAssignmentEntry ::= SEQUENCE {
qosIfDscpAssignmentId PolicyInstanceId,
qosIfDscpRoles RoleCombination,
qosIfQueueType QosInterfaceQueueType,
qosIfDscp Dscp,
qosIfQueue INTEGER,
qosIfThresholdSet INTEGER
}
qosIfDscpAssignmentId OBJECT-TYPE
SYNTAX PolicyInstanceId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An integer index to identify the instance of the policy class."
::= { qosIfDscpAssignmentEntry 1 }
qosIfDscpRoles OBJECT-TYPE
SYNTAX RoleCombination
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The role combination the interface must be configured with."
::= { qosIfDscpAssignmentEntry 2 }
qosIfQueueType OBJECT-TYPE
SYNTAX QosInterfaceQueueType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface queue type to which this row applies."
::= { qosIfDscpAssignmentEntry 3 }
qosIfDscp OBJECT-TYPE
SYNTAX Dscp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The DSCP to which this row applies."
::= { qosIfDscpAssignmentEntry 4 }
qosIfQueue OBJECT-TYPE
SYNTAX INTEGER (1..64)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The queue to which the DSCP applies for the given interface
type."
::= { qosIfDscpAssignmentEntry 5 }
qosIfThresholdSet OBJECT-TYPE
SYNTAX INTEGER (1..8)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The threshold set of the specified queue to which the DSCP
applies for the given interface type."
::= { qosIfDscpAssignmentEntry 6 }
-- The configuration of RED thresholds
--
qosIfRedTable OBJECT-TYPE
SYNTAX SEQUENCE OF QosIfRedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A class of lower and upper values for each threshold set in a
queue supporting WRED. If the size of the queue for a given
threshold is below the lower value then packets assigned to
that threshold are always accepted into the queue. If the
size of the queue is above upper value then packets are always
dropped. If the size of the queue is between the lower and
the upper then packets are randomly dropped."
::= { qosIfParameters 4 }
qosIfRedEntry OBJECT-TYPE
SYNTAX QosIfRedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An instance of this class specifies threshold limits for a
particular RED threshold of a given threshold set on an
interface and with a particular role combination."
INDEX { qosIfRedId }
::= { qosIfRedTable 1 }
QosIfRedEntry ::= SEQUENCE {
qosIfRedId PolicyInstanceId,
qosIfRedRoles RoleCombination,
qosIfRedNumThresholdSets ThresholdSetRange,
qosIfRedThresholdSet INTEGER,
qosIfRedThresholdSetLower Percent,
qosIfRedThresholdSetUpper Percent
}
qosIfRedId OBJECT-TYPE
SYNTAX PolicyInstanceId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An integer index to identify the instance of the policy class."
::= { qosIfRedEntry 1 }
qosIfRedRoles OBJECT-TYPE
SYNTAX RoleCombination
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The role combination the interface must be configured with."
::= { qosIfRedEntry 2 }
qosIfRedNumThresholdSets OBJECT-TYPE
SYNTAX ThresholdSetRange
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The values in this entry apply only to queues with the number
of thresholds specified by this attribute."
::= { qosIfRedEntry 3 }
qosIfRedThresholdSet OBJECT-TYPE
SYNTAX INTEGER (1..8)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The threshold set to which the lower and upper values apply.
It must be in the range 1 through qosIfRedNumThresholdSets.
There must be exactly one PRI for each value in this range."
::= { qosIfRedEntry 4 }
qosIfRedThresholdSetLower OBJECT-TYPE
SYNTAX Percent
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The threshold value below which no packets are dropped."
::= { qosIfRedEntry 5 }
qosIfRedThresholdSetUpper OBJECT-TYPE
SYNTAX Percent
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The threshold value above which all packets are dropped."
::= { qosIfRedEntry 6 }
-- The configuration of tail drop thresholds
--
qosIfTailDropTable OBJECT-TYPE
SYNTAX SEQUENCE OF QosIfTailDropEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A class for threshold sets in a queue supporting tail drop.
If the size of the queue for a given threshold set is at or
below the specified value then packets assigned to that
threshold set are always accepted into the queue. If the size
of the queue is above the specified value then packets are
always dropped."
::= { qosIfParameters 5 }
qosIfTailDropEntry OBJECT-TYPE
SYNTAX QosIfTailDropEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An instance of this class specifies the queue depth for a
particular tail-drop threshold set on an interface with a
particular role combination."
INDEX { qosIfTailDropId }
::= { qosIfTailDropTable 1 }
QosIfTailDropEntry ::= SEQUENCE {
qosIfTailDropId PolicyInstanceId,
qosIfTailDropRoles RoleCombination,
qosIfTailDropNumThresholdSets ThresholdSetRange,
qosIfTailDropThresholdSet INTEGER,
qosIfTailDropThresholdSetValue Percent
}
qosIfTailDropId OBJECT-TYPE
SYNTAX PolicyInstanceId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An integer index to identify the instance of the policy class."
::= { qosIfTailDropEntry 1 }
qosIfTailDropRoles OBJECT-TYPE
SYNTAX RoleCombination
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The role combination the interface must be configured with."
::= { qosIfTailDropEntry 2 }
qosIfTailDropNumThresholdSets OBJECT-TYPE
SYNTAX ThresholdSetRange
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value in this entry applies only to queues with the
number of thresholds specified by this attribute."
::= { qosIfTailDropEntry 3 }
qosIfTailDropThresholdSet OBJECT-TYPE
SYNTAX INTEGER (1..8)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The threshold set to which the threshold value applies"
::= { qosIfTailDropEntry 4 }
qosIfTailDropThresholdSetValue OBJECT-TYPE
SYNTAX Percent
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The threshold value above which packets are dropped."
::= { qosIfTailDropEntry 5 }
-- Weights for interfaces that support WRR, WFQ, CBWFQ, etc.
--
qosIfWeightsTable OBJECT-TYPE
SYNTAX SEQUENCE OF QosIfWeightsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A class of scheduling weights for each queue of an interface
that supports weighted round robin scheduling or a mix of
priority queueing and weighted round robin. For a queue with
N priority queues, the N highest queue numbers are the
priority queues with the highest queue number having the
highest priority. WRR is applied to the non-priority queues."
::= { qosIfParameters 6 }
qosIfWeightsEntry OBJECT-TYPE
SYNTAX QosIfWeightsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An instance of this class specifies the scheduling weight for
a particular queue of an interface with a particular number
of queues and with a particular role combination."
INDEX { qosIfWeightsId }
::= { qosIfWeightsTable 1 }
QosIfWeightsEntry ::= SEQUENCE {
qosIfWeightsId PolicyInstanceId,
qosIfWeightsRoles RoleCombination,
qosIfWeightsNumQueues QueueRange,
qosIfWeightsQueue INTEGER,
qosIfWeightsDrainSize Unsigned32,
qosIfWeightsQueueSize Unsigned32
}
qosIfWeightsId OBJECT-TYPE
SYNTAX PolicyInstanceId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An integer index to identify the instance of the policy class."
::= { qosIfWeightsEntry 1 }
qosIfWeightsRoles OBJECT-TYPE
SYNTAX RoleCombination
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The role combination the interface must be configured with."
::= { qosIfWeightsEntry 2 }
qosIfWeightsNumQueues OBJECT-TYPE
SYNTAX QueueRange
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the weight in this instance applies only to
interfaces with the number of queues specified by this
attribute."
::= { qosIfWeightsEntry 3 }
qosIfWeightsQueue OBJECT-TYPE
SYNTAX INTEGER (1..64)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The queue to which the weight applies."
::= { qosIfWeightsEntry 4 }
qosIfWeightsDrainSize OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of bytes that may be drained from the
queue in one cycle. The percentage of the bandwith allocated
to this queue can be calculated from this attribute and the
sum of the drain sizes of all the non-priority queues of the
interface."
::= { qosIfWeightsEntry 5 }
qosIfWeightsQueueSize OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The size of the queue in bytes. Some devices set queue size
in terms of packets. These devices must calculate the queue
size in packets by assuming an average packet size suitable
for the particular interface.
Some devices have a fixed size buffer to be shared among all
queues. These devices must allocate a fraction of the
total buffer space to this queue calculated as the the ratio
of the queue size to the sum of the queue sizes for the
interface."
::= { qosIfWeightsEntry 6 }
qosPIBCompliances OBJECT IDENTIFIER ::= { qosPIBConformance 1 }
qosPIBGroups OBJECT IDENTIFIER ::= { qosPIBConformance 2 }
-- Compliance
qosPIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for the QOS Policy Derived MIB."
MODULE
MANDATORY-GROUPS {
qosDevicePibIncarnationTableGroup,
qosDeviceAttributeTableGroup,
qosInterfaceTypeTableGroup
}
::= { qosPIBCompliances 1 }
qosDevicePibIncarnationTableGroup OBJECT-GROUP
OBJECTS {
qosDevicePdpName,
qosDevicePibIncarnation,
qosDevicePibTtl
}
STATUS current
DESCRIPTION
""
::= { qosPIBGroups 1 }
qosDeviceAttributeTableGroup OBJECT-GROUP
OBJECTS {
qosDevicePepDomain,
qosDevicePrimaryPdp,
qosDeviceSecondaryPdp,
qosDeviceMaxMessageSize,
qosDeviceCapabilities
}
STATUS current
DESCRIPTION
""
::= { qosPIBGroups 2 }
qosInterfaceTypeTableGroup OBJECT-GROUP
OBJECTS {
qosInterfaceQueueType,
qosInterfaceTypeRoles,
qosInterfaceTypeCapabilities
}
STATUS current
DESCRIPTION
""
::= { qosPIBGroups 3 }
qosDiffServMappingTableGroup OBJECT-GROUP
OBJECTS {
qosMarkedDscp,
qosL2Cos
}
STATUS current
DESCRIPTION
""
::= { qosPIBGroups 4 }
qosCosToDscpTableGroup OBJECT-GROUP
OBJECTS {
qosCosToDscpDscp
}
STATUS current
DESCRIPTION
""
::= { qosPIBGroups 5 }
qosUnmatchedPolicyTableGroup OBJECT-GROUP
OBJECTS {
qosUnmatchedPolicyRole,
qosUnmatchedPolicyDirection,
qosUnmatchedPolicyDscp,
qosUnmatchedPolicyDscpTrusted,
qosUnmatchPolMicroFlowPolicerId,
qosUnmatchedPolicyAggregateId
}
STATUS current
DESCRIPTION
""
::= { qosPIBGroups 6 }
qosPolicerTableGroup OBJECT-GROUP
OBJECTS {
qosPolicerRate,
qosPolicerNormalBurst,
qosPolicerExcessBurst,
qosPolicerAction
}
STATUS current
DESCRIPTION
""
::= { qosPIBGroups 7 }
qosAggregateTableGroup OBJECT-GROUP
OBJECTS {
qosAggregatePolicerId
}
STATUS current
DESCRIPTION
""
::= { qosPIBGroups 8 }
qosMacClassificationTableGroup OBJECT-GROUP
OBJECTS {
qosDstMacVlan,
qosDstMacAddress,
qosDstMacCos
}
STATUS current
DESCRIPTION
""
::= { qosPIBGroups 9 }
qosIpAceTableGroup OBJECT-GROUP
OBJECTS {
qosIpAceDstAddr,
qosIpAceDstAddrMask,
qosIpAceSrcAddr,
qosIpAceSrcAddrMask,
qosIpAceDscpMin,
qosIpAceDscpMax,
qosIpAceProtocol,
qosIpAceDstL4PortMin,
qosIpAceDstL4PortMax,
qosIpAceSrcL4PortMin,
qosIpAceSrcL4PortMax,
qosIpAcePermit
}
STATUS current
DESCRIPTION
""
::= { qosPIBGroups 10 }
qosIpAclDefinitionTableGroup OBJECT-GROUP
OBJECTS {
qosIpAclId,
qosIpAceOrder,
qosIpAclDefAceId
}
STATUS current
DESCRIPTION
""
::= { qosPIBGroups 11 }
qosIpAclActionTableGroup OBJECT-GROUP
OBJECTS {
qosIpAclActAclId,
qosIpAclInterfaceRoles,
qosIpAclInterfaceDirection,
qosIpAclOrder,
qosIpAclDscp,
qosIpAclDscpTrusted,
qosIpAclMicroFlowPolicerId,
qosIpAclAggregateId
}
STATUS current
DESCRIPTION
""
::= { qosPIBGroups 12 }
qosIfSchedulingPreferencesTableGroup OBJECT-GROUP
OBJECTS {
qosIfSchedulingRoles,
qosIfSchedulingPreference,
qosIfSchedulingDiscipline,
qosIfSchedulingQueueType
}
STATUS current
DESCRIPTION
""
::= { qosPIBGroups 13 }
qosIfDropPreferenceTableGroup OBJECT-GROUP
OBJECTS {
qosIfDropRoles,
qosIfDropPreference,
qosIfDropDiscipline
}
STATUS current
DESCRIPTION
""
::= { qosPIBGroups 14 }
qosIfDscpAssignmentTableGroup OBJECT-GROUP
OBJECTS {
qosIfDscpRoles,
qosIfQueueType,
qosIfDscp,
qosIfQueue,
qosIfThresholdSet
}
STATUS current
DESCRIPTION
""
::= { qosPIBGroups 15 }
qosIfRedTableGroup OBJECT-GROUP
OBJECTS {
qosIfRedRoles,
qosIfRedNumThresholdSets,
qosIfRedThresholdSet,
qosIfRedThresholdSetLower,
qosIfRedThresholdSetUpper
}
STATUS current
DESCRIPTION
""
::= { qosPIBGroups 16 }
qosIfTailDropTableGroup OBJECT-GROUP
OBJECTS {
qosIfTailDropRoles,
qosIfTailDropNumThresholdSets,
qosIfTailDropThresholdSet,
qosIfTailDropThresholdSetValue
}
STATUS current
DESCRIPTION
""
::= { qosPIBGroups 17 }
qosIfWeightsTableGroup OBJECT-GROUP
OBJECTS {
qosIfWeightsRoles,
qosIfWeightsNumQueues,
qosIfWeightsQueue,
qosIfWeightsDrainSize,
qosIfWeightsQueueSize
}
STATUS current
DESCRIPTION
""
::= { qosPIBGroups 18 }
END
Reference in New Issue Copy Permalink