mibs/MIBS/pfsense/BEGEMOT-BRIDGE-MIB

1167 lines
38 KiB
Plaintext
Raw Permalink Normal View History

2023-12-05 12:25:34 +01:00
--
-- Copyright (C) 2006 Shteryana Shopova <syrinx@FreeBSD.org>
-- All rights reserved.
--
-- Redistribution and use in source and binary forms, with or without
-- modification, are permitted provided that the following conditions
-- are met:
-- 1. Redistributions of source code must retain the above copyright
-- notice, this list of conditions and the following disclaimer.
-- 2. Redistributions in binary form must reproduce the above copyright
-- notice, this list of conditions and the following disclaimer in the
-- documentation and/or other materials provided with the distribution.
--
-- THIS SOFTWARE IS PROVIDED BY AUTHOR AND CONTRIBUTORS ``AS IS'' AND
-- ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-- IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-- ARE DISCLAIMED. IN NO EVENT SHALL AUTHOR OR CONTRIBUTORS BE LIABLE
-- FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-- DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-- OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-- HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-- LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-- OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-- SUCH DAMAGE.
--
-- $FreeBSD: releng/10.1/usr.sbin/bsnmpd/modules/snmp_bridge/BEGEMOT-BRIDGE-MIB.txt 171791 2007-08-08 19:27:50Z syrinx $
--
BEGEMOT-BRIDGE-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
Counter32, Integer32, TimeTicks, mib-2
FROM SNMPv2-SMI
TEXTUAL-CONVENTION, MacAddress, TruthValue, RowStatus
FROM SNMPv2-TC
BridgeId, Timeout
FROM BRIDGE-MIB
InterfaceIndex FROM IF-MIB
begemot
FROM BEGEMOT-MIB;
begemotBridge MODULE-IDENTITY
LAST-UPDATED "200708060000Z"
ORGANIZATION "Sofia University St. Kliment Ohridski"
CONTACT-INFO
" Shteryana Shopova
Postal: Faculty of Mathematics and Informatics
5 James Bourchier Blvd.
1164 Sofia
Bulgaria
Fax: +359 2 687 180
E-Mail: syrinx@FreeBSD.org"
DESCRIPTION
"The Begemot MIB for managing bridge interfaces."
REVISION "200708060000Z"
DESCRIPTION
"Third revision adds begemotBridgeBasePortPrivate
object."
REVISION "200611210000Z"
DESCRIPTION
"Second revision adds support for monitoring RSTP
specific variables."
REVISION "200607270000Z"
DESCRIPTION
"Initial revision."
::= { begemot 205 }
-- ---------------------------------------------------------- --
BridgeIfName ::= TEXTUAL-CONVENTION
DISPLAY-HINT "16a"
STATUS current
DESCRIPTION
"Name of a bridge interface."
SYNTAX OCTET STRING (SIZE(1..16))
BridgeIfNameOrEmpty ::= TEXTUAL-CONVENTION
DISPLAY-HINT "16a"
STATUS current
DESCRIPTION
"Name of a bridge interface."
SYNTAX OCTET STRING (SIZE(0..16))
BridgePortId ::= TEXTUAL-CONVENTION
DISPLAY-HINT "1x.1x"
STATUS current
DESCRIPTION
"A port identifier that contains a bridge port's STP priority
in the first octet and the port number in the second octet."
SYNTAX OCTET STRING (SIZE(2))
-- ---------------------------------------------------------- --
-- subtrees in the Begemot Bridge MIB
-- ---------------------------------------------------------- --
begemotBridgeNotifications OBJECT IDENTIFIER ::= { begemotBridge 0 }
begemotBridgeBase OBJECT IDENTIFIER ::= { begemotBridge 1 }
begemotBridgeStp OBJECT IDENTIFIER ::= { begemotBridge 2 }
begemotBridgeTp OBJECT IDENTIFIER ::= { begemotBridge 3 }
begemotBridgePf OBJECT IDENTIFIER ::= { begemotBridge 4 }
begemotBridgeConfigObjects OBJECT IDENTIFIER ::= { begemotBridge 5 }
-- ---------------------------------------------------------- --
-- the base Bridge interface table
-- ---------------------------------------------------------- --
begemotBridgeBaseTable OBJECT-TYPE
SYNTAX SEQUENCE OF BegemotBridgeBaseEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains generic information for each
bridge interface on the managed device."
::= { begemotBridgeBase 1 }
begemotBridgeBaseEntry OBJECT-TYPE
SYNTAX BegemotBridgeBaseEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information for the bridge interfaces on
the managed device."
INDEX { begemotBridgeBaseName }
::= { begemotBridgeBaseTable 1 }
BegemotBridgeBaseEntry ::= SEQUENCE {
begemotBridgeBaseName BridgeIfName,
begemotBridgeBaseAddress MacAddress,
begemotBridgeBaseNumPorts Integer32,
begemotBridgeBaseType INTEGER,
begemotBridgeBaseStatus RowStatus
}
begemotBridgeBaseName OBJECT-TYPE
SYNTAX BridgeIfName
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the bridge interface for which this
entry contains management information."
::= { begemotBridgeBaseEntry 1 }
begemotBridgeBaseAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address of the bridge interface."
::= { begemotBridgeBaseEntry 2 }
begemotBridgeBaseNumPorts OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ports, members of this bridge."
::= { begemotBridgeBaseEntry 3 }
begemotBridgeBaseType OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
transparent-only(2),
sourceroute-only(3),
srt(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates what type of bridging this bridge can
perform."
::= { begemotBridgeBaseEntry 4 }
begemotBridgeBaseStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Used to create/destroy bridge interfaces on the
managed device."
::= { begemotBridgeBaseEntry 5 }
-- ---------------------------------------------------------- --
-- the base Bridge ports table
-- ---------------------------------------------------------- --
begemotBridgeBasePortTable OBJECT-TYPE
SYNTAX SEQUENCE OF BegemotBridgeBasePortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing generic information about ports,
members of each bridge interface."
::= { begemotBridgeBase 2 }
begemotBridgeBasePortEntry OBJECT-TYPE
SYNTAX BegemotBridgeBasePortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information about a specific port, member of
a bridge interface."
INDEX { begemotBridgeBaseName, begemotBridgeBasePortIfIndex }
::= { begemotBridgeBasePortTable 1 }
BegemotBridgeBasePortEntry ::= SEQUENCE {
begemotBridgeBasePort Integer32,
begemotBridgeBasePortIfIndex InterfaceIndex,
begemotBridgeBaseSpanEnabled INTEGER,
begemotBridgeBasePortDelayExceededDiscards Counter32,
begemotBridgeBasePortMtuExceededDiscards Counter32,
begemotBridgeBasePortStatus RowStatus,
begemotBridgeBasePortPrivate TruthValue
}
begemotBridgeBasePort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The system interface index of the interface corresponding
to this port."
::= { begemotBridgeBasePortEntry 1 }
begemotBridgeBasePortIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the instance of the ifIndex object,
defined in IF-MIB, for the interface corresponding
to this port."
::= { begemotBridgeBasePortEntry 2 }
begemotBridgeBaseSpanEnabled OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this objects reflects whether the port
is a span port on the specified bridge interface."
::= { begemotBridgeBasePortEntry 3 }
begemotBridgeBasePortDelayExceededDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames discarded by this port due
to excessive transit delay through the bridge."
::= { begemotBridgeBasePortEntry 4 }
begemotBridgeBasePortMtuExceededDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames discarded by this port due
to an excessive size."
::= { begemotBridgeBasePortEntry 5 }
begemotBridgeBasePortStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Used to control addition of member ports to or
removal of member ports from a specified bridge."
::= { begemotBridgeBasePortEntry 6 }
begemotBridgeBasePortPrivate OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this objects reflects whether the port
has a PRIVATE flag set. A port with this flags set
can only communicate with ports not having the
PRIVATE flag set."
::= { begemotBridgeBasePortEntry 7 }
-- ---------------------------------------------------------- --
-- the Bridge interface STP table
-- ---------------------------------------------------------- --
begemotBridgeStpTable OBJECT-TYPE
SYNTAX SEQUENCE OF BegemotBridgeStpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains Spanning Tree Protocol information
for each bridge interface on the managed device."
::= { begemotBridgeStp 1 }
begemotBridgeStpEntry OBJECT-TYPE
SYNTAX BegemotBridgeStpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information about the Spanning Tree Protocol
operation on a bridge interface."
AUGMENTS { begemotBridgeBaseEntry }
::= { begemotBridgeStpTable 1 }
BegemotBridgeStpEntry ::= SEQUENCE {
begemotBridgeStpProtocolSpecification INTEGER,
begemotBridgeStpPriority Integer32,
begemotBridgeStpTimeSinceTopologyChange TimeTicks,
begemotBridgeStpTopChanges Counter32,
begemotBridgeStpDesignatedRoot BridgeId,
begemotBridgeStpRootCost Integer32,
begemotBridgeStpRootPort Integer32,
begemotBridgeStpMaxAge Timeout,
begemotBridgeStpHelloTime Timeout,
begemotBridgeStpHoldTime Integer32,
begemotBridgeStpForwardDelay Timeout,
begemotBridgeStpBridgeMaxAge Timeout,
begemotBridgeStpBridgeHelloTime Timeout,
begemotBridgeStpBridgeForwardDelay Timeout,
begemotBridgeStpVersion INTEGER,
begemotBridgeStpTxHoldCount Integer32
}
begemotBridgeStpProtocolSpecification OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
decLb100(2),
ieee8021d(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Spanning Tree Protocol version being run on the
bridge interface. The value 'decLb100(2)' indicates the
DEC LANbridge 100 Spanning Tree protocol, 'ieee8021d(3)'
indicates the bridge is running IEEE 802.1D STP
implementation."
::= { begemotBridgeStpEntry 1 }
begemotBridgeStpPriority OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The priority value of the bridge interface forming the
first two octets of the bridge identifier. Acceptable
values are 0-61440, in steps of 4096."
::= { begemotBridgeStpEntry 2 }
begemotBridgeStpTimeSinceTopologyChange OBJECT-TYPE
SYNTAX TimeTicks
UNITS "centi-seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time (in hundreds of a second) since a topology change
was last detected by this bridge."
::= { begemotBridgeStpEntry 3 }
begemotBridgeStpTopChanges OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times a topology change was detected by the
bridge interface since the management entity was initialized
or reset."
::= { begemotBridgeStpEntry 4 }
begemotBridgeStpDesignatedRoot OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bridge identifier of the root of the spanning tree as
calculated by the Spanning Tree Protocol."
::= { begemotBridgeStpEntry 5 }
begemotBridgeStpRootCost OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The cost of the path from this bridge to the root bridge."
::= { begemotBridgeStpEntry 6 }
begemotBridgeStpRootPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port number of the port that offers the lowest
cost path from this bridge to the root bridge of
the spanning tree. If this bridge is the root bridge,
this object shall have a value of zero."
::= { begemotBridgeStpEntry 7 }
begemotBridgeStpMaxAge OBJECT-TYPE
SYNTAX Timeout
UNITS "centi-seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum age of Spanning Tree Protocol information
received from the network on any port, before that
information is discarded. This is the actual value that
the bridge is currently using."
::= { begemotBridgeStpEntry 8 }
begemotBridgeStpHelloTime OBJECT-TYPE
SYNTAX Timeout
UNITS "centi-seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of time between transmission of
Configuration BPDUs by this bridge on any port,
when it is the root of the spanning tree or is
trying to become so. This is the actual value that
this bridge is currently using."
::= { begemotBridgeStpEntry 9 }
begemotBridgeStpHoldTime OBJECT-TYPE
SYNTAX Integer32
UNITS "centi-seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This time value determines the interval length
during which no more than two Configuration BPDUs
shall be transmitted by this node, in units of
hundredths of a second."
::= { begemotBridgeStpEntry 10 }
begemotBridgeStpForwardDelay OBJECT-TYPE
SYNTAX Timeout
UNITS "centi-seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value, measured in units of hundredths of a second
determines how long a port will stay consecutively in the
Listening and Learning states before transitioning to
Forwarding state.
This is the actual value currently used by the bridge
as opposed to begemotBridgeStpBridgeForwardDelay, which
is the value this and all bridges participating in the
spanning tree were to use, if this was the root bridge."
::= { begemotBridgeStpEntry 11 }
begemotBridgeStpBridgeMaxAge OBJECT-TYPE
SYNTAX Timeout (600..4000)
UNITS "centi-seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value that all bridges participating in the
spanning tree would use for MaxAge if this bridge
was the root of the spanning tree."
::= { begemotBridgeStpEntry 12 }
begemotBridgeStpBridgeHelloTime OBJECT-TYPE
SYNTAX Timeout (100..1000)
UNITS "centi-seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value that all bridges participating in the
spanning tree would use for HelloTime if this
bridge was the root of the spanning tree."
::= { begemotBridgeStpEntry 13 }
begemotBridgeStpBridgeForwardDelay OBJECT-TYPE
SYNTAX Timeout (400..3000)
UNITS "centi-seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value that all bridges participating in the
spanning tree would use for ForwardDelay if this
bridge was the root of the spanning tree."
::= { begemotBridgeStpEntry 14 }
begemotBridgeStpVersion OBJECT-TYPE
SYNTAX INTEGER {
stpCompatible(0),
rstp(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The version of Spanning Tree Protocol the bridge is
currently running. The value 'stpCompatible(0)'
indicates the Spanning Tree Protocol specified in
IEEE 802.1D-1998 and 'rstp(2)' indicates the Rapid
Spanning Tree Protocol specified in IEEE 802.1w and
clause 17 of 802.1D-2004. The values are directly from
the IEEE standard. New values may be defined as future
versions of the protocol become available.
The value of this object MUST be retained across
reinitializations of the management system."
DEFVAL { rstp }
::= { begemotBridgeStpEntry 15 }
begemotBridgeStpTxHoldCount OBJECT-TYPE
SYNTAX Integer32 (1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value used by the Port Transmit state machine to limit
the maximum transmission rate of BPDUs on the bridge interface.
The value of this object MUST be retained across
reinitializations of the management system."
DEFVAL { 3 }
::= { begemotBridgeStpEntry 16 }
-- ---------------------------------------------------------- --
-- the Bridge STP ports table
-- ---------------------------------------------------------- --
begemotBridgeStpPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF BegemotBridgeStpPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing Spanning Tree Protocol information
about the members of each bridge interface."
::= { begemotBridgeStp 2 }
begemotBridgeStpPortEntry OBJECT-TYPE
SYNTAX BegemotBridgeStpPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of Spanning Tree Protocol information about
a specific member of a bridge interface."
INDEX { begemotBridgeBaseName, begemotBridgeBasePortIfIndex }
::= { begemotBridgeStpPortTable 1 }
BegemotBridgeStpPortEntry ::= SEQUENCE {
begemotBridgeStpPort Integer32,
begemotBridgeStpPortPriority Integer32,
begemotBridgeStpPortState INTEGER,
begemotBridgeStpPortEnable INTEGER,
begemotBridgeStpPortPathCost Integer32,
begemotBridgeStpPortDesignatedRoot BridgeId,
begemotBridgeStpPortDesignatedCost Integer32,
begemotBridgeStpPortDesignatedBridge BridgeId,
begemotBridgeStpPortDesignatedPort BridgePortId,
begemotBridgeStpPortForwardTransitions Counter32
}
begemotBridgeStpPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The system interface index of the interface corresponding
to this port, for which the management entity has Spanning
Tree Protocol information."
::= { begemotBridgeStpPortEntry 1 }
begemotBridgeStpPortPriority OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The STP priority of this port that is contained in the first
octet of its Port Identifier. The second octet contains the
value of begemotBridgeStpPort."
::= { begemotBridgeStpPortEntry 2 }
begemotBridgeStpPortState OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
blocking(2),
listening(3),
learning(4),
forwarding(5),
broken(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current state of the port as defined by the operation
of the Spanning Tree Protocol. If the Spanning Tree Protocol
is administratively disabled on the port, this object shall
have value disabled(1). A value of broken(6) does not correspond
to any legal state of a port, and if present should indicate
error in the operation of either the Spanning Tree Protocol
implementation running on the device or the management entity."
::= { begemotBridgeStpPortEntry 3 }
begemotBridgeStpPortEnable OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative Spanning Tree Protocol state of the
port - value of enabled(1) indicates that the port is
participating in the Spanning Tree Protocol operation."
::= { begemotBridgeStpPortEntry 4 }
begemotBridgeStpPortPathCost OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The contribution of the path through this port, when the port
is the Root Port, to the total cost of the path to the root
bridge for this bridge."
::= { begemotBridgeStpPortEntry 5 }
begemotBridgeStpPortDesignatedRoot OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unique Bridge Identifier of the bridge recorded as the
root in the Root Identifier parameter of Configuration BPDUs
transmitted by the Designated Bridge for the LAN to which
the port is attached."
::= { begemotBridgeStpPortEntry 6 }
begemotBridgeStpPortDesignatedCost OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For a Designated port, the path cost (equal to the Root
Path Cost of the bridge) offered to the LAN to which the
port is attached otherwise the cost of the path to the Root
offered by the Designated Port on the LAN to which this
Port is attached."
::= { begemotBridgeStpPortEntry 7 }
begemotBridgeStpPortDesignatedBridge OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unique Bridge Identifier of the bridge to which the
port belongs, in the case when the port is a designated
port, otherwise the bridge believed to be the Designated
Bridge for the LAN to which this port is attached."
::= { begemotBridgeStpPortEntry 8 }
begemotBridgeStpPortDesignatedPort OBJECT-TYPE
SYNTAX BridgePortId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Port Identifier of the Bridge port, on the Designated
Bridge, through which the Designated Bridge transmits the
Configuration Message information stored by this port."
::= { begemotBridgeStpPortEntry 9 }
begemotBridgeStpPortForwardTransitions OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times this port has transitioned
from the Learning state to the Forwarding state."
::= { begemotBridgeStpPortEntry 10 }
-- ---------------------------------------------------------- --
-- the Bridge STP extended ports table
-- ---------------------------------------------------------- --
begemotBridgeStpExtPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF BegemotBridgeStpExtPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains port-specific Rapid Spanning Tree
information for the bridge interface members."
::= { begemotBridgeStp 3 }
begemotBridgeStpExtPortEntry OBJECT-TYPE
SYNTAX BegemotBridgeStpExtPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of Rapid Spanning Tree information maintained by
each bridge interface member."
AUGMENTS { begemotBridgeStpPortEntry }
::= { begemotBridgeStpExtPortTable 1 }
BegemotBridgeStpExtPortEntry ::= SEQUENCE {
begemotBridgeStpPortProtocolMigration TruthValue,
begemotBridgeStpPortAdminEdgePort TruthValue,
begemotBridgeStpPortOperEdgePort TruthValue,
begemotBridgeStpPortAdminPointToPoint INTEGER,
begemotBridgeStpPortOperPointToPoint TruthValue,
begemotBridgeStpPortAdminPathCost Integer32
}
begemotBridgeStpPortProtocolMigration OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When operating in RSTP (version 2) mode, writing true(1)
to this object forces this port to transmit RSTP BPDUs.
Any other operation on this object has no effect and
it always returns false(2) when read."
::= { begemotBridgeStpExtPortEntry 1 }
begemotBridgeStpPortAdminEdgePort OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative value of the Edge Port parameter. A
value of true(1) indicates that this port should be
assumed as an edge-port, and a value of false(2) indicates
that this port should be assumed as a non-edge-port.
Setting this object will also cause the corresponding
instance of begemotBridgeStpPortOperEdgePort to change to
the same value. Note that even when this object's value
is true, the value of the corresponding instance of
begemotBridgeStpPortOperEdgePort can be false if a BPDU
has been received.
The value of this object MUST be retained across
reinitializations of the management system."
::= { begemotBridgeStpExtPortEntry 2 }
begemotBridgeStpPortOperEdgePort OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational value of the Edge Port parameter. The
object is initialized to the value of the corresponding
instance of begemotBridgeStpPortAdminEdgePort. When the
corresponding instance of begemotBridgeStpPortAdminEdgePort
is set, this object will be changed as well. This object
will also be changed to false on reception of a BPDU."
::= { begemotBridgeStpExtPortEntry 3 }
begemotBridgeStpPortAdminPointToPoint OBJECT-TYPE
SYNTAX INTEGER {
forceTrue(0),
forceFalse(1),
auto(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative point-to-point status of the LAN segment
attached to this port, using the enumeration values of the
IEEE 802.1w clause. A value of forceTrue(0) indicates
that this port should always be treated as if it is
connected to a point-to-point link. A value of
forceFalse(1) indicates that this port should be treated as
having a shared media connection. A value of auto(2)
indicates that this port is considered to have a
point-to-point link if it is an Aggregator and all of its
members are aggregatable, or if the MAC entity
is configured for full duplex operation, either through
auto-negotiation or by management means. Manipulating this
object changes the underlying adminPortToPortMAC.
The value of this object MUST be retained across
reinitializations of the management system."
::= { begemotBridgeStpExtPortEntry 4 }
begemotBridgeStpPortOperPointToPoint OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational point-to-point status of the LAN segment
attached to this port. It indicates whether a port is
considered to have a point-to-point connection.
If adminPointToPointMAC is set to auto(2), then the value
of operPointToPointMAC is determined in accordance with the
specific procedures defined for the MAC entity concerned,
as defined in IEEE 802.1w, clause 6.5. The value is
determined dynamically; that is, it is re-evaluated whenever
the value of adminPointToPointMAC changes, and whenever
the specific procedures defined for the MAC entity evaluates
a change in its point-to-point status."
::= { begemotBridgeStpExtPortEntry 5 }
begemotBridgeStpPortAdminPathCost OBJECT-TYPE
SYNTAX Integer32 (0..200000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administratively assigned value for the contribution
of this port to the path cost of paths toward the spanning
tree root.
Writing a value of '0' assigns the automatically calculated
default Path Cost value to the port. If the default Path
Cost is being used, this object returns '0' when read.
This complements the object begemotBridgeStpPortPathCost or
begemotBridgeStpPortPathCost32, which returns the operational
value of the path cost.
The value of this object MUST be retained across
reinitializations of the management system."
::= { begemotBridgeStpExtPortEntry 6 }
-- ---------------------------------------------------------- --
-- the Bridge interface Transparent bridging table
-- ---------------------------------------------------------- --
begemotBridgeTpTable OBJECT-TYPE
SYNTAX SEQUENCE OF BegemotBridgeTpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains information regarding transparent
bridging for each bridge interface on the managed device."
::= { begemotBridgeTp 1 }
begemotBridgeTpEntry OBJECT-TYPE
SYNTAX BegemotBridgeTpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information regarding transparent bridging
on a bridge interface."
AUGMENTS { begemotBridgeBaseEntry }
::= { begemotBridgeTpTable 1 }
BegemotBridgeTpEntry ::= SEQUENCE {
begemotBridgeTpLearnedEntryDiscards Counter32,
begemotBridgeTpAgingTime Integer32,
begemotBridgeTpMaxAddresses Integer32
}
begemotBridgeTpLearnedEntryDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Forwarding Database entries that would
have been learnt, but have been discarded due to Forwarding
Address Table having reached it's maximum entries limit."
::= { begemotBridgeTpEntry 1 }
begemotBridgeTpAgingTime OBJECT-TYPE
SYNTAX Integer32 (10..1000000)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The timeout period in seconds before aging out
dynamically learnt forwarding entries."
::= { begemotBridgeTpEntry 2 }
begemotBridgeTpMaxAddresses OBJECT-TYPE
SYNTAX Integer32 (1..10000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum number of entires that this bridge can
learn in it's Forwarding Address Table and use for
making forwarding decisions."
::= { begemotBridgeTpEntry 3 }
-- ---------------------------------------------------------- --
-- The Forwarding Database for Transparent Bridging interfaces
-- ---------------------------------------------------------- --
begemotBridgeTpFdbTable OBJECT-TYPE
SYNTAX SEQUENCE OF BegemotBridgeTpFdbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains information about unicast entries
for which the bridge interfaces have forwarding and/or
filtering information. This information is used by the
bridge interfaces to make forwarding decisions."
::= { begemotBridgeTp 2 }
begemotBridgeTpFdbEntry OBJECT-TYPE
SYNTAX BegemotBridgeTpFdbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a specific unicast MAC address
for which the bridge interface has some forwarding
and/or filtering information."
INDEX { begemotBridgeBaseName, begemotBridgeTpFdbAddress }
::= { begemotBridgeTpFdbTable 1 }
BegemotBridgeTpFdbEntry ::= SEQUENCE {
begemotBridgeTpFdbAddress MacAddress,
begemotBridgeTpFdbPort Integer32,
begemotBridgeTpFdbStatus INTEGER
}
begemotBridgeTpFdbAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A unicast MAC address for which the bridge has which the
bridge interface has some forwarding and/or filtering
information."
::= { begemotBridgeTpFdbEntry 1 }
begemotBridgeTpFdbPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port number of the bridge port on which a frame having
a source address equal to the value of the corresponding
instance of begemotBridgeTpFdbAddress has been seen."
::= { begemotBridgeTpFdbEntry 2 }
begemotBridgeTpFdbStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1),
invalid(2),
learned(3),
self(4),
mgmt(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of this entry. The meanings of the
values are:
other(1) - none of the following.
invalid(2) - this entry is no longer valid (e.g.,
it was learned but has since aged out), but has
not yet been flushed from the table.
learned(3) - the value of the corresponding instance
of begemotBridgeTpFdbPort was learned, and is being
used.
self(4) - the value of the corresponding instance of
begemotBridgeTpFdbAddress represents one of the
bridge's addresses. The corresponding instance of
begemotBridgeTpFdbPort indicates which of the bridge's
ports has this address.
mgmt(5) - the value of the corresponding instance of
begemotBridgeTpFdbAddress has been added to the
bridge's Forwarding Database by some management
means."
::= { begemotBridgeTpFdbEntry 3 }
-- ---------------------------------------------------------- --
-- Ports table for Transparent Bridging interfaces
-- ---------------------------------------------------------- --
begemotBridgeTpPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF BegemotBridgeTpPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains information about every bridge port,
member of a bridge interface, associated with the transparent
bridging function of the bridge."
::= { begemotBridgeTp 3 }
begemotBridgeTpPortEntry OBJECT-TYPE
SYNTAX BegemotBridgeTpPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information about every bridge port, member of a
bridge interface, associated with the bridge's transparent
bridging function."
INDEX { begemotBridgeBaseName, begemotBridgeBasePortIfIndex }
::= { begemotBridgeTpPortTable 1 }
BegemotBridgeTpPortEntry ::= SEQUENCE {
begemotBridgeTpPort Integer32,
begemotBridgeTpPortMaxInfo Integer32,
begemotBridgeTpPortInFrames Counter32,
begemotBridgeTpPortOutFrames Counter32,
begemotBridgeTpPortInDiscards Counter32
}
begemotBridgeTpPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The system interface index of the port for which this entry
contains Transparent bridging management information."
::= { begemotBridgeTpPortEntry 1 }
begemotBridgeTpPortMaxInfo OBJECT-TYPE
SYNTAX Integer32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum size of the INFO (non-MAC) field that this port
will receive or transmit."
::= { begemotBridgeTpPortEntry 2 }
begemotBridgeTpPortInFrames OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames that have been received by this
port from its segment. Note that a frame received on the
interface corresponding to this port is only counted by
this object if and only if it is for a protocol being
processed by the local bridging function, including
bridge management frames."
::= { begemotBridgeTpPortEntry 3 }
begemotBridgeTpPortOutFrames OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames that have been transmitted by this
port to its segment. Note that a frame transmitted on
the interface corresponding to this port is only counted
by this object if and only if it is for a protocol being
processed by the local bridging function, including
bridge management frames."
::= { begemotBridgeTpPortEntry 4 }
begemotBridgeTpPortInDiscards OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of received valid frames that were discarded
(i.e., filtered) by the Forwarding Process."
::= { begemotBridgeTpPortEntry 5 }
-- ---------------------------------------------------------- --
-- the begemotBridgePf objects
-- ---------------------------------------------------------- --
begemotBridgePfilStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether packet filtering by some firewall
package is enabled on the bridge interface."
::= { begemotBridgePf 1 }
begemotBridgePfilMembers OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A value of true(1) indicates that packet filtering is
enabled on both incoming and outgoing bridge member
interfaces."
::= { begemotBridgePf 2 }
begemotBridgePfilIpOnly OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This value controls the handling of non-IP packets which
are not passed on for further processing to a firewall
package. A value of false(0) indicates that all non-IP
Ethernet frames are passed unconditionally."
::= { begemotBridgePf 3 }
begemotBridgeLayer2PfStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This value indicates whether layer2 filtering by a
firewall package is enabled for bridge interfaces."
::= { begemotBridgePf 4 }
-- ---------------------------------------------------------- --
-- the begemotBridgeConfigObjects objects
-- ---------------------------------------------------------- --
begemotBridgeDefaultBridgeIf OBJECT-TYPE
SYNTAX BridgeIfNameOrEmpty
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The name of the bridge interface that will be managed
via objects in IETF BRIDGE-MIB (RFC4188). If the
object's value is set to an empty string, bridge interfaces
will only be managed via objects in this MIB module."
DEFVAL { "bridge0" }
::= { begemotBridgeConfigObjects 1 }
begemotBridgeDataUpdate OBJECT-TYPE
SYNTAX Timeout (1..300)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum age in seconds of the cached data."
DEFVAL { 10 }
::= { begemotBridgeConfigObjects 2 }
begemotBridgeDataPoll OBJECT-TYPE
SYNTAX Timeout (1..3600)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The polling rate of data when the module is idle."
DEFVAL { 300 }
::= { begemotBridgeConfigObjects 3 }
-- ---------------------------------------------------------- --
-- Notifications for the Spanning Tree Protocol
-- ---------------------------------------------------------- --
begemotBridgeNewRoot NOTIFICATION-TYPE
OBJECTS { begemotBridgeBaseName }
STATUS current
DESCRIPTION
"The begemotBridgeNewRoot trap indicates that one of the
bridge interfaces on the sending agent's device has
become the new root of the spanning tree topology it is
participating in."
::= { begemotBridgeNotifications 1 }
begemotBridgeTopologyChange NOTIFICATION-TYPE
OBJECTS { begemotBridgeBaseName }
STATUS current
DESCRIPTION
"A begemotBridgeTopologyChange trap is send when a member
port on one of the bridge interfaces, monitored by the agent,
transitions from the Learning state to the Forwarding state,
or from the Forwarding state to the Blocking state. The trap
is not sent if a begemotBridgeNewRoot trap is sent for the
same transition."
::= { begemotBridgeNotifications 2 }
END