mibs/MIBS/quanta/fastpath_auth_mgr.my

625 lines
25 KiB
Plaintext
Raw Permalink Normal View History

2023-12-05 12:25:34 +01:00
NETGEAR-AUTHENTICATION-MANAGER-MIB DEFINITIONS ::= BEGIN
-- Netgear Authentication Manager MIB
-- Copyright Netgear Inc (2012) All rights reserved.
-- This SNMP Management Information Specification
-- embodies Netgear Inc's confidential and proprietary
-- intellectual property. Netgear Inc retains all title
-- and ownership in the Specification including any revisions.
-- This Specification is supplied "AS IS", Netgear Inc
-- makes no warranty, either expressed or implied,
-- as to the use, operation, condition, or performance of the
-- Specification.
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
TimeTicks, Unsigned32
FROM SNMPv2-SMI
MacAddress,TEXTUAL-CONVENTION,DateAndTime
FROM SNMPv2-TC
DisplayString FROM RFC1213-MIB
ifIndex FROM IF-MIB
InterfaceIndex FROM IF-MIB
lb6m FROM QUANTA-LB6M-REF-MIB;
fastPathAuthMgr MODULE-IDENTITY
LAST-UPDATED "201212280000Z" -- 28 December 2012 12:00:00 GMT
ORGANIZATION "Netgear Inc"
CONTACT-INFO ""
DESCRIPTION
"Private MIB for auth mgr"
-- Revision history.
REVISION
"201212280000Z" -- 28 December 2012 12:00:00 GMT
DESCRIPTION
"Initial version."
::= { lb6m 61 }
--**************************************************************************************
-- agentAuthMgrGlobalConfigGroup
--**************************************************************************************
agentAuthMgrGlobalConfigGroup OBJECT IDENTIFIER ::= { fastPathAuthMgr 1 }
agentAuthMgrAdminMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable the authentication manager feature on the system."
DEFVAL { disable }
::= { agentAuthMgrGlobalConfigGroup 1 }
--**************************************************************************************
-- agentAuthMgrInterfaceConfigGroup
--**************************************************************************************
agentAuthMgrInterfaceConfigGroup OBJECT IDENTIFIER ::= { fastPathAuthMgr 2 }
agentAuthMgrInterfaceConfigMethodTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentAuthMgrInterfaceConfigMethodEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The interface configuration for authentication manager"
::= { agentAuthMgrInterfaceConfigGroup 1 }
agentAuthMgrInterfaceConfigMethodEntry OBJECT-TYPE
SYNTAX AgentAuthMgrInterfaceConfigMethodEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The authentication manager interface config entry."
INDEX { agentAuthMgrIfIndex, methodIndex}
::= { agentAuthMgrInterfaceConfigMethodTable 1 }
AgentAuthMgrInterfaceConfigMethodEntry ::= SEQUENCE {
agentAuthMgrIfIndex
InterfaceIndex,
methodIndex
Unsigned32,
agentAuthMgrMethodOrder
INTEGER,
agentAuthMgrMethodPriority
INTEGER
}
agentAuthMgrIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The interface index for which the authentication manager config is required."
::= { agentAuthMgrInterfaceConfigMethodEntry 1 }
methodIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of the configuration method."
::= { agentAuthMgrInterfaceConfigMethodEntry 2 }
agentAuthMgrMethodOrder OBJECT-TYPE
SYNTAX INTEGER {
undefined(0),
dot1x(1),
mab(2),
captivePortal(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The authentication methods allowed for order configuration."
DEFVAL { undefined }
::= { agentAuthMgrInterfaceConfigMethodEntry 3 }
agentAuthMgrMethodPriority OBJECT-TYPE
SYNTAX INTEGER {
undefined(0),
dot1x(1),
mab(2),
captivePortal(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The authentication methods allowed for priority configuration."
DEFVAL { undefined }
::= { agentAuthMgrInterfaceConfigMethodEntry 4 }
agentAuthMgrInterfaceConfigTimerTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentAuthMgrInterfaceConfigTimerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The interface configuration for authentication manager"
::= { agentAuthMgrInterfaceConfigGroup 2 }
agentAuthMgrInterfaceConfigTimerEntry OBJECT-TYPE
SYNTAX AgentAuthMgrInterfaceConfigTimerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Authentication Manager Interface config entry."
INDEX { agentAuthMgrTimerIfIndex}
::= { agentAuthMgrInterfaceConfigTimerTable 1 }
AgentAuthMgrInterfaceConfigTimerEntry ::= SEQUENCE {
agentAuthMgrTimerIfIndex
InterfaceIndex,
agentAuthMgrRestart
Unsigned32
}
agentAuthMgrTimerIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The interface ifIndex for which the authentication manager config is required."
::= { agentAuthMgrInterfaceConfigTimerEntry 1 }
agentAuthMgrRestart OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The authentication restart timer value."
DEFVAL { 300 }
::= { agentAuthMgrInterfaceConfigTimerEntry 2 }
--**************************************************************************************
-- agentAuthMgrInterfaceStatusGroup
--**************************************************************************************
agentAuthMgrInterfaceStatusGroup OBJECT IDENTIFIER ::= { fastPathAuthMgr 3 }
agentAuthMgrInterfaceStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentAuthMgrInterfaceStatusMethodEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The interface configuration for authentication manager"
::= { agentAuthMgrInterfaceStatusGroup 1 }
agentAuthMgrInterfaceStatusEntry OBJECT-TYPE
SYNTAX AgentAuthMgrInterfaceStatusMethodEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The authentication manager interface config entry."
INDEX { agentAuthMgrIfIndex, methodIndex}
::= { agentAuthMgrInterfaceStatusTable 1 }
AgentAuthMgrInterfaceStatusMethodEntry ::= SEQUENCE {
agentAuthMgrStatusMethodOrder
INTEGER,
agentAuthMgrStatusMethodPriority
INTEGER
}
agentAuthMgrStatusMethodOrder OBJECT-TYPE
SYNTAX INTEGER {
undefined(0),
dot1x(1),
mab(2),
captivePortal(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The authentication methods allowed for order configuration."
DEFVAL { undefined }
::= { agentAuthMgrInterfaceStatusEntry 1 }
agentAuthMgrStatusMethodPriority OBJECT-TYPE
SYNTAX INTEGER {
undefined(0),
dot1x(1),
mab(2),
captivePortal(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The authentication methods allowed for priority configuration."
DEFVAL { undefined }
::= { agentAuthMgrInterfaceStatusEntry 2 }
--**************************************************************************************
-- agentAuthMgrClientStatusGroup -> Contains MIB objects displaying Authentication Manager Client details and
-- associated Functionality
--
--**************************************************************************************
agentAuthMgrClientStatusGroup OBJECT IDENTIFIER ::= { fastPathAuthMgr 4 }
agentAuthMgrClientStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentAuthMgrClientStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table for auth mgr client details and associated functionality."
::= { agentAuthMgrClientStatusGroup 1 }
agentAuthMgrClientStatusEntry OBJECT-TYPE
SYNTAX AgentAuthMgrClientStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Represents entry for port config table."
INDEX { agentAuthMgrClientMacAddress}
::= {agentAuthMgrClientStatusTable 1 }
AgentAuthMgrClientStatusEntry ::= SEQUENCE {
agentAuthMgrClientMacAddress
MacAddress,
agentAuthMgrLogicalPort
Unsigned32,
agentAuthMgrInterface
Unsigned32,
agentAuthMgrClientAuthstatus
INTEGER,
agentAuthMgrClientAuthMethod
INTEGER
}
agentAuthMgrClientMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the MAC address of the client."
::= { agentAuthMgrClientStatusEntry 1}
agentAuthMgrLogicalPort OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the logical port number of the client connection."
::= { agentAuthMgrClientStatusEntry 2}
agentAuthMgrInterface OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the physical interface to which the client is attached."
::= { agentAuthMgrClientStatusEntry 3}
agentAuthMgrClientAuthstatus OBJECT-TYPE
SYNTAX INTEGER {
authorized(1),
unauthorized(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The authentication status of the client."
::={ agentAuthMgrClientStatusEntry 4}
agentAuthMgrClientAuthMethod OBJECT-TYPE
SYNTAX INTEGER {
undefined(0),
dot1x(1),
mab(2),
captivePortal(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The method using which the client is authenticated."
::={ agentAuthMgrClientStatusEntry 5}
agentAuthMgrAuthHistoryResultsGroup OBJECT IDENTIFIER ::= { fastPathAuthMgr 5 }
agentAuthMgrPortAuthHistoryResultTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentAuthMgrPortAuthHistoryResultEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table to display history of the authentication manager."
::= { agentAuthMgrAuthHistoryResultsGroup 1 }
agentAuthMgrPortAuthHistoryResultEntry OBJECT-TYPE
SYNTAX AgentAuthMgrPortAuthHistoryResultEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Represents authentication manager results in history table."
INDEX { agentAuthMgrAuthHistoryResultIfaceIndex,
agentAuthMgrAuthHistoryResultIndex}
::= {agentAuthMgrPortAuthHistoryResultTable 1 }
AgentAuthMgrPortAuthHistoryResultEntry ::= SEQUENCE {
agentAuthMgrAuthHistoryResultIfaceIndex Unsigned32,
agentAuthMgrAuthHistoryResultIndex Unsigned32,
agentAuthMgrAuthHistoryResultTimeStamp DateAndTime,
agentAuthMgrAuthHistoryResultMacAddress MacAddress,
agentAuthMgrAuthHistoryResultAuthMethod Unsigned32,
agentAuthMgrAuthHistoryResultAuthStatus INTEGER
}
agentAuthMgrAuthHistoryResultIfaceIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the physical bridge port on which dot1x authentication event
might be received."
::= { agentAuthMgrPortAuthHistoryResultEntry 1 }
agentAuthMgrAuthHistoryResultIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Reference to the authentication manager authentication history table maintained."
::= { agentAuthMgrPortAuthHistoryResultEntry 2 }
agentAuthMgrAuthHistoryResultTimeStamp OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the exact time of authentication manager authentication
event information occurred maintained in the
history table."
::= { agentAuthMgrPortAuthHistoryResultEntry 3 }
agentAuthMgrAuthHistoryResultMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the client MAC address maintained in
the authentication history table."
::= { agentAuthMgrPortAuthHistoryResultEntry 4 }
agentAuthMgrAuthHistoryResultAuthMethod OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The method using which the client is authenticated."
::= { agentAuthMgrPortAuthHistoryResultEntry 5 }
agentAuthMgrAuthHistoryResultAuthStatus OBJECT-TYPE
SYNTAX INTEGER {
success(1),
failure(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the authentication manager authentication status (Success or Failure)
for the authentication manager authentication event takes place. "
::= { agentAuthMgrPortAuthHistoryResultEntry 6 }
-- agentAuthMgrAuthHistoryResultsClear OBJECT-TYPE
-- SYNTAX INTEGER {
-- enable(1),
-- disable(2)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "When set to enable(1), all Authentication Manager Authentication History information will be reset."
-- DEFVAL { disable }
-- ::= { agentAuthMgrAuthHistoryResultsGroup 2 }
--**************************************************************************************
-- agentAuthMgrPortAuthHistoryResultClearTable
--
--**************************************************************************************
agentAuthMgrPortAuthHistoryResultClearTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentAuthMgrPortAuthHistoryResultClearEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table to clear the authentication manager authentication history per interface."
::= { agentAuthMgrAuthHistoryResultsGroup 3 }
agentAuthMgrPortAuthHistoryResultClearEntry OBJECT-TYPE
SYNTAX AgentAuthMgrPortAuthHistoryResultClearEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Represents to clear the authentication manager authentication results for an
authentication manager authentication history table."
INDEX { agentAuthMgrAuthHistoryResultIfIndex }
::= {agentAuthMgrPortAuthHistoryResultClearTable 1 }
AgentAuthMgrPortAuthHistoryResultClearEntry ::= SEQUENCE {
agentAuthMgrAuthHistoryResultIfIndex Unsigned32,
agentAuthMgrPortAuthHistoryResultsClear INTEGER
}
agentAuthMgrAuthHistoryResultIfIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the physical Bridge Port on which authentication event
might be received."
::= { agentAuthMgrPortAuthHistoryResultClearEntry 1 }
agentAuthMgrPortAuthHistoryResultsClear OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When set to enable(1), all authentication manager authentication history information for
the given port will be reset. The value is write-only. Attempt to read
will return disable(2)."
DEFVAL { disable }
::= { agentAuthMgrPortAuthHistoryResultClearEntry 2 }
--**************************************************************************************
-- agentAuthMgrAuthStatsGroup -> Contains MIB objects displaying Authentication Manager
-- statistics per interface
--**************************************************************************************
agentAuthMgrAuthStatsGroup OBJECT IDENTIFIER ::= { fastPathAuthMgr 6 }
agentAuthMgrPortStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentAuthMgrPortStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table to display the authentication manager statistics."
::= { agentAuthMgrAuthStatsGroup 1 }
agentAuthMgrPortStatsEntry OBJECT-TYPE
SYNTAX AgentAuthMgrPortStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Represents authentication manager statistics per port."
INDEX { agentAuthMgrPortIfaceIndex, agentAuthMgrPortMethodIndex }
::= {agentAuthMgrPortStatsTable 1 }
AgentAuthMgrPortStatsEntry ::= SEQUENCE {
agentAuthMgrPortIfaceIndex Unsigned32,
agentAuthMgrPortMethodIndex INTEGER,
agentAuthMgrPortStatsAttempts Unsigned32,
agentAuthMgrPortStatsFailedAttempts Unsigned32
}
agentAuthMgrPortIfaceIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object represents the physical bridge port on which statistics
are retrieved."
::= { agentAuthMgrPortStatsEntry 1 }
agentAuthMgrPortMethodIndex OBJECT-TYPE
SYNTAX INTEGER {
dot1x(1),
mab(2),
captivePortal(3)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of the authentication method for which statistics are reviewed."
::= { agentAuthMgrPortStatsEntry 2 }
agentAuthMgrPortStatsAttempts OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the number of successful authentications events
of specified method on specified port."
::= { agentAuthMgrPortStatsEntry 3 }
agentAuthMgrPortStatsFailedAttempts OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the number of unsuccessful authentications attempts
of specified method on specified port."
::= { agentAuthMgrPortStatsEntry 4 }
-- Clear statistics ----
agentAuthMgrPortStatsClearTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentAuthMgrPortStatsClearEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table to clear the authentication manager statistics."
::= { agentAuthMgrAuthStatsGroup 2 }
agentAuthMgrPortStatsClearEntry OBJECT-TYPE
SYNTAX AgentAuthMgrPortStatsClearEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Represents to clear the authentication manager statistics per interface."
INDEX { agentAuthMgrPortIfaceIndex }
::= {agentAuthMgrPortStatsClearTable 1 }
AgentAuthMgrPortStatsClearEntry ::= SEQUENCE {
agentAuthMgrPortIfaceIndex Unsigned32,
agentAuthMgrPortStatsClear INTEGER
}
agentAuthMgrPortStatsClear OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When set to enable(1), all authentication manager statistics for
the given port will be reset. The value is write-only. Attempt to read
will return disable(2)."
DEFVAL { disable }
::= { agentAuthMgrPortStatsClearEntry 2 }
--**************************************************************************************
-- Auth Mgr Traps Config
--**************************************************************************************
agentAuthMgrTrapsConfigGroup OBJECT IDENTIFIER ::= { fastPathAuthMgr 7 }
authMgrTrapMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object enables/disables the user manager trap mode."
DEFVAL { disable }
::= { agentAuthMgrTrapsConfigGroup 1 }
--**************************************************************************************
-- Auth Mgr Traps
--
--**************************************************************************************
fastpathAuthMgrTraps OBJECT IDENTIFIER ::= { fastPathAuthMgr 0 }
agentAuthMgrClientAuthStatusTrap NOTIFICATION-TYPE
OBJECTS {
agentAuthMgrInterface,
agentAuthMgrClientMacAddress,
agentAuthMgrClientAuthMethod,
agentAuthMgrClientAuthstatus
}
STATUS current
DESCRIPTION
"Trap is sent from Auth Mgr when client is authorised/un-authorised."
::= { fastpathAuthMgrTraps 1 }
END