david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
main
mibs/MIBS/quanta/fastpath_captive_portal.my

1618 lines
66 KiB
Plaintext
Raw Permalink Normal View History

Initial commit
2023-12-05 12:25:34 +01:00
NETGEAR-CAPTIVE-PORTAL-MIB DEFINITIONS ::= BEGIN
-- Netgear Captive Portal MIB
-- Copyright Netgear Inc (2007) All rights reserved.
-- This SNMP Management Information Specification
-- embodies Netgear Inc's confidential and proprietary
-- intellectual property. Netgear Inc retains all title
-- and ownership in the Specification including any revisions.
-- This Specification is supplied "AS IS", Netgear Inc
-- makes no warranty, either expressed or implied,
-- as to the use, operation, condition, or performance of the
-- Specification.
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, IpAddress,
IpAddress,Integer32, Counter32, Counter64, TimeTicks, Unsigned32
FROM SNMPv2-SMI
RowStatus,MacAddress,TEXTUAL-CONVENTION
FROM SNMPv2-TC
DisplayString FROM RFC1213-MIB
ifIndex FROM IF-MIB
InterfaceIndex FROM IF-MIB
InetAddressType, InetAddress FROM INET-ADDRESS-MIB
lb6m FROM QUANTA-LB6M-REF-MIB;
fastPathCaptivePortal MODULE-IDENTITY
LAST-UPDATED "201101260000Z" -- 26 January 2011 12:00:00 GMT
ORGANIZATION "Netgear Inc"
CONTACT-INFO ""
DESCRIPTION
"Private MIB for Captive Portal"
-- Revision history.
REVISION
"201101260000Z" -- 26 January 2011 12:00:00 GMT
DESCRIPTION
"Postal address updated."
REVISION
"200707090000Z" -- 09 July 2007 12:00:00 GMT
DESCRIPTION
"Initial version."
::= { lb6m 38 }
--
-- ***********************************************************
--
-- Textual Conventions
--
-- ***********************************************************
CpCaptivePortalIntfCapabilitiesMap ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Description of the interface capabilities.
The bit 'other(0)' indicates that the interface has capabilities
other than those listed below.
The bit 'sessionTimeout(1)' indicates that the interface supports timeout
when traffic is not received or sent within the idle timeout period.
The bit 'idleTimeout(2)' indicates that the interface supports timeout
when traffic is not received or sent within the idle timeout period.
The bit 'maxBytesReceivedCounter(3)' indicates that the interface
supports displaying the number of bytes received from each client.
The bit 'maxBytesTransmittedCounter(4)' indicates that the interface
supports displaying the number of bytes transmittted from each client.
The bit 'maxPacketsReceivedCounter(5)' indicates that the interface
supports displaying the number of packets received from each client.
The bit 'maxPacketsTransmittedCounter(6)' indicates that the interface
supports displaying the number of packets transmitted from each client.
The bit 'clientRoaming(7)' indicates that the interfacesupports client
roaming. This is supported by wireless interfaces only"
SYNTAX BITS {
other(0),
sessionTimeout(1),
idleTimeout(2),
maxBytesReceivedCounter(3),
maxBytesTransmittedCounter(4),
maxPacketsReceivedCounter(5),
maxPacketsTransmittedCounter(6),
clientRoaming(7)
}
--**************************************************************************************
-- cpConfigGroup
--**************************************************************************************
cpConfigGroup OBJECT IDENTIFIER ::= { fastPathCaptivePortal 1 }
--**************************************************************************************
-- cpGlobalConfigGroup
--**************************************************************************************
cpGlobalConfigGroup OBJECT IDENTIFIER ::= { cpConfigGroup 1 }
cpAdminMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable the captive portal feature on the system."
DEFVAL { disable }
::= { cpGlobalConfigGroup 1 }
cpAdditionalHttpPort OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The additional captive portal authentication server port for
HTTP web connection. The HTTP port default is 0 which denotes
no specific port and the default port (80) is used."
DEFVAL { 0 }
::= { cpGlobalConfigGroup 2 }
-- object support based on L7_SSLT_PACKAGE inclusion
cpAdditionalHttpSecurePort OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The additional captive portal authentication server secure
port for HTTPS web connection. This additional HTTPS port default
is 0 which denotes no specific port and the default port (443) is used."
DEFVAL { 0 }
::= { cpGlobalConfigGroup 3 }
-- object support based on cluster support
cpPeerStatsReportingInterval OBJECT-TYPE
SYNTAX Integer32 ( 0 | 15..3600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The time interval between statistics reports to the cluster controller.
A value of 0 indicates reporting is disabled.
The value is represented in seconds."
DEFVAL { 120 }
::= { cpGlobalConfigGroup 4 }
cpAuthTimeout OBJECT-TYPE
SYNTAX Integer32 (60..600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The length of time to maintain an authentication session from a client.
This time is measured from when a client initiates an authentication request.
The value is represented in seconds."
DEFVAL { 300 }
::= { cpGlobalConfigGroup 5 }
--**************************************************************************************
-- cpCaptivePortalConfigGroup
--
--**************************************************************************************
cpCaptivePortalConfigGroup OBJECT IDENTIFIER ::= { cpConfigGroup 2 }
cpCaptivePortalTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpCaptivePortalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of config parms for instances of captive portal."
::= { cpCaptivePortalConfigGroup 1 }
cpCaptivePortalEntry OBJECT-TYPE
SYNTAX CpCaptivePortalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Captive Portal instance entry."
INDEX { cpCaptivePortalInstanceId }
::= { cpCaptivePortalTable 1 }
CpCaptivePortalEntry ::= SEQUENCE {
cpCaptivePortalInstanceId
Unsigned32,
cpCaptivePortalConfigName
DisplayString,
cpCaptivePortalAdminMode
INTEGER,
cpCaptivePortalProtocolMode
INTEGER,
cpCaptivePortalVerificationMode
INTEGER,
cpCaptivePortalUserLogoutMode
INTEGER,
cpCaptivePortalURLRedirectMode
INTEGER,
cpCaptivePortalRedirectURL
DisplayString,
cpCaptivePortalSessionTimeout
Unsigned32,
cpCaptivePortalIdleTimeout
Unsigned32,
cpCaptivePortalRadiusAuthServer
DisplayString,
cpCaptivePortalMaxBandwidthUp
Unsigned32,
cpCaptivePortalMaxBandwidthDown
Unsigned32,
cpCaptivePortalMaxInputOctets
Unsigned32,
cpCaptivePortalMaxOutputOctets
Unsigned32,
cpCaptivePortalMaxTotalOctets
Unsigned32,
cpCaptivePortalUserGroup
Unsigned32,
cpCaptivePortalRowStatus
RowStatus
}
cpCaptivePortalInstanceId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The identifier associated with this instance of captive portal."
::= { cpCaptivePortalEntry 1 }
cpCaptivePortalConfigName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The name, in alpha-numeric characters, assigned to this captive portal configuration."
::= { cpCaptivePortalEntry 2 }
cpCaptivePortalAdminMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable this instance of captive portal on the system."
DEFVAL { enable }
::= { cpCaptivePortalEntry 3 }
cpCaptivePortalProtocolMode OBJECT-TYPE
SYNTAX INTEGER {
https(0),
http(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The protocol mode to be used."
DEFVAL { http }
::= { cpCaptivePortalEntry 4 }
cpCaptivePortalVerificationMode OBJECT-TYPE
SYNTAX INTEGER {
guest(0),
local(1),
radius(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The type of user verification to perform."
DEFVAL { guest }
::= { cpCaptivePortalEntry 5 }
cpCaptivePortalUserGroup OBJECT-TYPE
SYNTAX Unsigned32(1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The group ID for this captive portal user database."
DEFVAL { 1 }
::= { cpCaptivePortalEntry 6 }
cpCaptivePortalURLRedirectMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Whether the captive portal should redirect newly authenticated
clients to the configured URL. If this mode is disabled, the
default locale specific welcome page is used. If enabled, the
client is redirected to a configured URL."
DEFVAL { disable }
::= { cpCaptivePortalEntry 7 }
cpCaptivePortalRedirectURL OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..256))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The URL to which the newly authenticated client is redirected
if cpCaptivePortalURLRedirectMode is enabled."
::= { cpCaptivePortalEntry 8 }
cpCaptivePortalSessionTimeout OBJECT-TYPE
SYNTAX Unsigned32(0..86400)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The session timeout. After this limit has been reached the user
will be disconnected. If this value is set to 0, no timeout is enforced.
This value is represented in seconds."
DEFVAL { 0 }
::= { cpCaptivePortalEntry 9 }
cpCaptivePortalIdleTimeout OBJECT-TYPE
SYNTAX Unsigned32(0..900)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The idle timeout of the session. After this limit has been reached the user
will be disconnected. If this value is set to 0, no timeout is enforced.
This value is represented in seconds."
DEFVAL { 0 }
::= { cpCaptivePortalEntry 10 }
cpCaptivePortalRadiusAuthServer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The RADIUS authentication server name assigned to this captive portal configuration.
RADIUS server name may only contain alphanumeric plus dash, underline, and space characters."
::= { cpCaptivePortalEntry 11 }
cpCaptivePortalMaxBandwidthUp OBJECT-TYPE
SYNTAX Unsigned32(0..536870911)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum bandwidth, in bytes per second, that a client can transmit traffic
when using Captive Portal. This setting limits the bandwidth at which the client
can send data into the network. If this value is set to 0, no rate limiting is enforced.
This value is represented in bytes (however; converted & stored as bits/sec)."
DEFVAL { 0 }
::= { cpCaptivePortalEntry 12 }
cpCaptivePortalMaxBandwidthDown OBJECT-TYPE
SYNTAX Unsigned32(0..536870911)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum bandwidth, in bytes per second, that a client can receive traffic
when using Captive Portal. This setting limits the bandwidth at which the client
can receive data from the network. If this value is set to 0, no rate limiting is enforced.
This value is represented in bytes (however; converted & stored as bits/sec)."
DEFVAL { 0 }
::= { cpCaptivePortalEntry 13 }
cpCaptivePortalMaxInputOctets OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum input octets (bytes) allowed for the session.
After this limit has been reached the user will be disconnected.
If this value is set to 0, no rate limiting is enforced.
This value is represented in bytes."
DEFVAL { 0 }
::= { cpCaptivePortalEntry 14 }
cpCaptivePortalMaxOutputOctets OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum Output octets (bytes) allowed for the session.
After this limit has been reached the user will be disconnected.
If this value is set to 0, no rate limiting is enforced.
This value is represented in bytes."
DEFVAL { 0 }
::= { cpCaptivePortalEntry 15 }
cpCaptivePortalMaxTotalOctets OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum input/output octets (bytes) allowed for the session.
After this limit has been reached the user will be disconnected.
If this value is set to 0, no rate limiting is enforced.
This value is represented in bytes."
DEFVAL { 0 }
::= { cpCaptivePortalEntry 16 }
cpCaptivePortalUserLogoutMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Provides the captive portal authenticated user the ability to
logout of their session through the use of a logout page. The
connection will be terminated as a result of submitting the
logout request."
DEFVAL { disable }
::= { cpCaptivePortalEntry 17 }
cpCaptivePortalRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The captive portal instance status.
Supported values:
active(1) - This status is displayed after a valid Captive Portal instance is created.
createAndGo(4) - Set to this value to create a new Captive Portal instance.
destroy(6) - Set to this value to remove an existing Captive Portal instance."
::= { cpCaptivePortalEntry 18 }
--**************************************************************************************
-- cpLocalUserDatabaseGroup
--**************************************************************************************
cpLocalUserDatabaseGroup OBJECT IDENTIFIER ::= { cpConfigGroup 3 }
-- ---------------------------------
-- cpLocalUserGroupTable
-- ---------------------------------
cpLocalUserGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpLocalUserGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of group definitions for the local users. This database is
used by captive portal instances and local users if the verification mode is set to LOCAL."
::= { cpLocalUserDatabaseGroup 1 }
cpLocalUserGroupEntry OBJECT-TYPE
SYNTAX CpLocalUserGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The user group entry."
INDEX { cpLocalUserGroupIndex }
::= { cpLocalUserGroupTable 1 }
CpLocalUserGroupEntry ::= SEQUENCE {
cpLocalUserGroupIndex
Integer32,
cpLocalUserGroupName
DisplayString,
cpLocalUserGroupRowStatus
RowStatus
}
cpLocalUserGroupIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The user group entry index."
::= { cpLocalUserGroupEntry 1 }
cpLocalUserGroupName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The user group name, limited to alpha-numeric strings (including the '-' and '_' characters)."
::= { cpLocalUserGroupEntry 2 }
cpLocalUserGroupRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The user group entry status.
Supported values:
active(1) - This status is displayed after a valid user group is created.
createAndGo(4) - Set to this value to create a new user group.
destroy(6) - Set to this value to remove an existing user group."
::= { cpLocalUserGroupEntry 3 }
-- ---------------------------------
-- cpLocalUserTable
-- ---------------------------------
cpLocalUserTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpLocalUserEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of user definitions for the local database. This database is
used by a captive portal instance if its verification mode is set to LOCAL."
::= { cpLocalUserDatabaseGroup 2 }
cpLocalUserEntry OBJECT-TYPE
SYNTAX CpLocalUserEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The local user entry."
INDEX { cpLocalUserIndex }
::= { cpLocalUserTable 1 }
CpLocalUserEntry ::= SEQUENCE {
cpLocalUserIndex
Integer32,
cpLocalUserName
DisplayString,
cpLocalUserPassword
DisplayString,
cpLocalUserSessionTimeout
Unsigned32,
cpLocalUserIdleTimeout
Unsigned32,
cpLocalUserMaxBandwidthUp
Unsigned32,
cpLocalUserMaxBandwidthDown
Unsigned32,
cpLocalUserMaxInputOctets
Unsigned32,
cpLocalUserMaxOutputOctets
Unsigned32,
cpLocalUserMaxTotalOctets
Unsigned32,
cpLocalUserRowStatus
RowStatus
}
cpLocalUserIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The local user entry index."
::= { cpLocalUserEntry 1 }
cpLocalUserName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The user name, limited to alpha-numeric strings (including the '-' and '_' characters)."
::= { cpLocalUserEntry 2 }
cpLocalUserPassword OBJECT-TYPE
SYNTAX DisplayString (SIZE(8..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The user password. This object will return an empty string even if a password is set."
::= { cpLocalUserEntry 3 }
cpLocalUserSessionTimeout OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The session timeout in seconds. After this limit is reached, the user is disconnected.
If this value is set to 0, the default value for the captive portal is used."
DEFVAL { 0 }
::= { cpLocalUserEntry 4 }
cpLocalUserIdleTimeout OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The idle timeout of the session in seconds. After this limit is reached, the user is disconnected.
If this value is set to 0, the default value for the captive portal is used."
DEFVAL { 0 }
::= { cpLocalUserEntry 5 }
cpLocalUserMaxBandwidthUp OBJECT-TYPE
SYNTAX Unsigned32(0..536870911)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum bandwidth, in bytes per second, that the user can transmit traffic
when using Captive Portal. This setting limits the bandwidth at which the user
can send data into the network. If this value is set to 0, no rate limiting is enforced.
This value is represented in bytes (however; converted & stored as bits/sec)."
DEFVAL { 0 }
::= { cpLocalUserEntry 6 }
cpLocalUserMaxBandwidthDown OBJECT-TYPE
SYNTAX Unsigned32(0..536870911)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum bandwidth, in bytes per second, that the user can receive traffic
when using Captive Portal. This setting limits the bandwidth at which the user
can receive data from the network. If this value is set to 0, no rate limiting is enforced.
This value is represented in bytes (however; converted & stored as bits/sec)."
DEFVAL { 0 }
::= { cpLocalUserEntry 7 }
cpLocalUserMaxInputOctets OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum input octets (bytes) allowed for the session.
After this limit has been reached the user will be disconnected.
If this value is set to 0, no rate limiting is enforced.
This value is represented in bytes."
DEFVAL { 0 }
::= { cpLocalUserEntry 8 }
cpLocalUserMaxOutputOctets OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum Output octets (bytes) allowed for the session.
After this limit has been reached the user will be disconnected.
If this value is set to 0, no rate limiting is enforced.
This value is represented in bytes."
DEFVAL { 0 }
::= { cpLocalUserEntry 9 }
cpLocalUserMaxTotalOctets OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum input/output octets (bytes) allowed for the session.
After this limit has been reached the user will be disconnected.
If this value is set to 0, no rate limiting is enforced.
This value is represented in bytes."
DEFVAL { 0 }
::= { cpLocalUserEntry 10 }
cpLocalUserRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The user entry status.
Supported values:
active(1) - This status is displayed after a valid user is created.
createAndGo(4) - Set to this value to create a new user.
destroy(6) - Set to this value to remove an existing user."
::= { cpLocalUserEntry 11 }
-- ---------------------------------
-- cpLocalUserGroupAssociationTable
-- ---------------------------------
cpLocalUserGroupAssociationTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpLocalUserGroupAssociationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The mapping of local user assignments to a user group."
::= { cpLocalUserDatabaseGroup 3 }
cpLocalUserGroupAssociationEntry OBJECT-TYPE
SYNTAX CpLocalUserGroupAssociationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The local user group association entry."
INDEX { cpLocalUserGroupAssociationUserIndex, cpLocalUserGroupAssociationGroupIndex }
::= { cpLocalUserGroupAssociationTable 1 }
CpLocalUserGroupAssociationEntry ::= SEQUENCE {
cpLocalUserGroupAssociationUserIndex
Integer32,
cpLocalUserGroupAssociationGroupIndex
Integer32,
cpLocalUserGroupAssociationRowStatus
RowStatus
}
cpLocalUserGroupAssociationUserIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The local user entry index associated with a user group."
::= { cpLocalUserGroupAssociationEntry 1 }
cpLocalUserGroupAssociationGroupIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The user group entry index associated with a local user."
::= { cpLocalUserGroupAssociationEntry 2 }
cpLocalUserGroupAssociationRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The local user to user group association entry status.
Supported values:
active(1) - This status is displayed after a valid association
between a local user and a user group is created.
createAndGo(4) - Set to this value to create a new association
between a local user and a user group.
destroy(6) - Set to this value to remove an existing association
between a local user and a user group."
::= { cpLocalUserGroupAssociationEntry 3 }
--**************************************************************************************
-- cpInterfaceAssociationGroup
--**************************************************************************************
cpInterfaceAssociationGroup OBJECT IDENTIFIER ::= { cpConfigGroup 4 }
cpInterfaceAssociationTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpInterfaceAssociationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The mapping of interface assignments to a captive portal instance."
::= { cpInterfaceAssociationGroup 1 }
cpInterfaceAssociationEntry OBJECT-TYPE
SYNTAX CpInterfaceAssociationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Captive Portal interface association entry."
INDEX { cpIntfAssociationCPID, cpIntfAssociationIfIndex }
::= { cpInterfaceAssociationTable 1 }
CpInterfaceAssociationEntry ::= SEQUENCE {
cpIntfAssociationCPID
Unsigned32,
cpIntfAssociationIfIndex
InterfaceIndex,
cpIntfAssociationRowStatus
RowStatus
}
cpIntfAssociationCPID OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Captive Portal instance identifier associated with an interface."
::= { cpInterfaceAssociationEntry 1 }
cpIntfAssociationIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The interface ifIndex to which the Captive Portal instance is associated."
::= { cpInterfaceAssociationEntry 2 }
cpIntfAssociationRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Captive Portal instance to interface association status.
Supported values:
active(1) - This status is displayed after a valid association
between a Captive Portal instance and an interface is created.
createAndGo(4) - Set to this value to create a new association
between a Captive Portal instance and an interface.
destroy(6) - Set to this value to remove an existing association
between a Captive Portal instance and an interface."
::= { cpInterfaceAssociationEntry 3 }
--**************************************************************************************
-- cpStatusGroup
--**************************************************************************************
cpStatusGroup OBJECT IDENTIFIER ::= { fastPathCaptivePortal 2 }
--**************************************************************************************
-- cpCaptivePortalGlobalStatusGroup
--**************************************************************************************
cpCaptivePortalGlobalStatusGroup OBJECT IDENTIFIER ::= { cpStatusGroup 1 }
cpCaptivePortalOperStatus OBJECT-TYPE
SYNTAX INTEGER {
enablePending(0),
enabled(1),
disablePending(2),
disabled(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indication of the current operational state of the captive portal feature."
::= { cpCaptivePortalGlobalStatusGroup 1 }
cpCaptivePortalOperDisabledReason OBJECT-TYPE
SYNTAX INTEGER {
none(0),
adminDisabled(1),
noIPAddress(2),
noIPRoutingIntf(3),
routingDisabled(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The reason for the captive portal feature being operationally disabled."
::= { cpCaptivePortalGlobalStatusGroup 2 }
cpCaptivePortalIpv4Address OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of this captive portal."
::= { cpCaptivePortalGlobalStatusGroup 3 }
cpCaptivePortalInstanceMaxCount OBJECT-TYPE
SYNTAX Integer32(0..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of captive portal instances supported by the system."
::= { cpCaptivePortalGlobalStatusGroup 4}
cpCaptivePortalInstanceConfiguredCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of captive portal instances currently configured in the system."
::= { cpCaptivePortalGlobalStatusGroup 5 }
cpCaptivePortalInstanceActiveCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of captive portal instances currently active in the system."
::= { cpCaptivePortalGlobalStatusGroup 6 }
cpCaptivePortalAuthenUserMaxCount OBJECT-TYPE
SYNTAX Integer32(0..1024)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of authenticated users that the system can support."
::= { cpCaptivePortalGlobalStatusGroup 7 }
cpCaptivePortalLocalUserMaxCount OBJECT-TYPE
SYNTAX Integer32(0..1024)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of local users that the system can support."
::= { cpCaptivePortalGlobalStatusGroup 8 }
cpCaptivePortalConfiguredLocalUserCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of local users currently configured in the system."
::= { cpCaptivePortalGlobalStatusGroup 9 }
cpCaptivePortalAuthenUserCurrentCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of currently authenticated users across all captive portal instances."
::= { cpCaptivePortalGlobalStatusGroup 10 }
--**************************************************************************************
-- cpCaptivePortalInstanceStatusGroup
--**************************************************************************************
cpCaptivePortalInstanceStatusGroup OBJECT IDENTIFIER ::= { cpStatusGroup 2 }
cpCaptivePortalInstanceStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpCaptivePortalInstanceStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This database is used to report status for a captive portal instance."
::= { cpCaptivePortalInstanceStatusGroup 1 }
cpCaptivePortalInstanceStatusEntry OBJECT-TYPE
SYNTAX CpCaptivePortalInstanceStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Captive portal instance status entry."
INDEX { cpCaptivePortalInstanceId }
::= { cpCaptivePortalInstanceStatusTable 1 }
CpCaptivePortalInstanceStatusEntry ::= SEQUENCE {
cpCaptivePortalInstanceOperStatus
INTEGER,
cpCaptivePortalInstanceOperDisabledReason
INTEGER,
cpCaptivePortalInstanceBlockStatus
INTEGER,
cpCaptivePortalInstanceAuthUserCount
Integer32
}
cpCaptivePortalInstanceOperStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indication of the current operational state of the captive portal instance."
DEFVAL { disable }
::= { cpCaptivePortalInstanceStatusEntry 1 }
cpCaptivePortalInstanceOperDisabledReason OBJECT-TYPE
SYNTAX INTEGER {
none(0),
adminDisabled(1),
noRadiusServer(2),
noAccountingServer(3),
noIntfAssociation(4),
noActiveIntf(5),
noValidCert(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The reason the captive portal instance is not currently operational."
::= { cpCaptivePortalInstanceStatusEntry 2 }
cpCaptivePortalInstanceBlockStatus OBJECT-TYPE
SYNTAX INTEGER {
blockPending(0),
blocked(1),
notBlockPending(2),
notBlocked(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Block or unblock the captive portal instance for authentications
using the following values:
blockPending(0) - Set to this value to block the captive portal instance for authentications.
After setting this value, the status displayed is blocked(1).
notBlockPending(2) - Set to this value to unblock the captive portal instance for authentications.
After setting this value, the status displayed is notBlocked(3)."
DEFVAL { notBlocked }
::= { cpCaptivePortalInstanceStatusEntry 3 }
cpCaptivePortalInstanceAuthUserCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of currently authenticated users for this captive portal."
::= { cpCaptivePortalInstanceStatusEntry 4 }
--**************************************************************************************
-- cpCaptivePortalIntfStatusGroup
--**************************************************************************************
cpCaptivePortalIntfStatusGroup OBJECT IDENTIFIER ::= { cpStatusGroup 3 }
cpCaptivePortalIntfStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpCaptivePortalIntfStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This database is used to report status for a captive portal instance interface."
::= { cpCaptivePortalIntfStatusGroup 1 }
cpCaptivePortalIntfStatusEntry OBJECT-TYPE
SYNTAX CpCaptivePortalIntfStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Captive portal instance interface status entry."
INDEX { cpCaptivePortalInstanceId, cpCaptivePortalIntfIfIndex }
::= { cpCaptivePortalIntfStatusTable 1 }
CpCaptivePortalIntfStatusEntry ::= SEQUENCE {
cpCaptivePortalIntfIfIndex
InterfaceIndex,
cpCaptivePortalIntfActivationStatus
INTEGER,
cpCaptivePortalIntfActivationDisabledReason
INTEGER,
cpCaptivePortalIntfBlockStatus
INTEGER,
cpCaptivePortalIntfAuthUserCount
Integer32
}
cpCaptivePortalIntfIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ifIndex of the interface associated with this entry."
::= { cpCaptivePortalIntfStatusEntry 1 }
cpCaptivePortalIntfActivationStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indication of whether captive portal instance is active on the interface."
DEFVAL { disable }
::= { cpCaptivePortalIntfStatusEntry 2 }
cpCaptivePortalIntfActivationDisabledReason OBJECT-TYPE
SYNTAX INTEGER {
none(0),
intfNotAttached(1),
adminDisabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The reason for the captive portal instance interface not being currently active."
::= { cpCaptivePortalIntfStatusEntry 3 }
cpCaptivePortalIntfBlockStatus OBJECT-TYPE
SYNTAX INTEGER {
blocked(0),
notBlocked(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indication of whether the captive portal instance interface is
currently blocked for authentications."
DEFVAL { notBlocked }
::= { cpCaptivePortalIntfStatusEntry 4 }
cpCaptivePortalIntfAuthUserCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of currently authenticated users for this captive portal instance interface."
::= { cpCaptivePortalIntfStatusEntry 5 }
--**************************************************************************************
-- cpCaptivePortalIntfDatabaseGroup
--**************************************************************************************
cpCaptivePortalIntfDatabaseGroup OBJECT IDENTIFIER ::= { cpStatusGroup 4 }
cpCaptivePortalIntfDatabaseTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpCaptivePortalIntfDatabaseEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of definitions for interfaces that are captive portal capable.
This table identifies services that are provided on this interface."
::= { cpCaptivePortalIntfDatabaseGroup 1 }
cpCaptivePortalIntfDatabaseEntry OBJECT-TYPE
SYNTAX CpCaptivePortalIntfDatabaseEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { cpCaptivePortalIntfIfIndex }
::= { cpCaptivePortalIntfDatabaseTable 1 }
CpCaptivePortalIntfDatabaseEntry ::= SEQUENCE {
cpCaptivePortalIntfCapabilities
CpCaptivePortalIntfCapabilitiesMap
}
cpCaptivePortalIntfCapabilities OBJECT-TYPE
SYNTAX CpCaptivePortalIntfCapabilitiesMap
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bitmap value used to identify which capabilities are available on the interface."
::= { cpCaptivePortalIntfDatabaseEntry 1 }
--**************************************************************************************
-- cpCaptivePortalClientStatusGroup
--**************************************************************************************
cpCaptivePortalClientStatusGroup OBJECT IDENTIFIER ::= { cpStatusGroup 5 }
cpCaptivePortalClientStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpCaptivePortalClientStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This database is used to report status of authenticated clients."
::= { cpCaptivePortalClientStatusGroup 1 }
cpCaptivePortalClientStatusEntry OBJECT-TYPE
SYNTAX CpCaptivePortalClientStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Captive portal client status entry."
INDEX { cpCaptivePortalClientMacAddress }
::= { cpCaptivePortalClientStatusTable 1 }
CpCaptivePortalClientStatusEntry ::= SEQUENCE {
cpCaptivePortalClientMacAddress
MacAddress,
cpCaptivePortalClientIpAddress
IpAddress,
cpCaptivePortalClientUserName
DisplayString,
cpCaptivePortalClientProtocolMode
INTEGER,
cpCaptivePortalClientVerificationMode
INTEGER,
cpCaptivePortalClientAssocIfIndex
InterfaceIndex,
cpCaptivePortalClientCPID
Integer32,
cpCaptivePortalClientSessionTime
TimeTicks,
cpCaptivePortalClientSwitchMacAddress
MacAddress,
cpCaptivePortalClientSwitchIpAddress
IpAddress,
cpCaptivePortalClientSwitchType
INTEGER,
cpCaptivePortalClientDeauthAction
INTEGER
}
cpCaptivePortalClientMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address of the workstation from which the client is authenticated."
::= { cpCaptivePortalClientStatusEntry 1 }
cpCaptivePortalClientIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the workstation from which the client is authenticated."
::= { cpCaptivePortalClientStatusEntry 2 }
cpCaptivePortalClientUserName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"User name (or Guest ID) of the connected client."
::= { cpCaptivePortalClientStatusEntry 3 }
cpCaptivePortalClientProtocolMode OBJECT-TYPE
SYNTAX INTEGER {
https(0),
http(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Protocol mode used for the client authentication."
::= { cpCaptivePortalClientStatusEntry 4 }
cpCaptivePortalClientVerificationMode OBJECT-TYPE
SYNTAX INTEGER {
guest(0),
local(1),
radius(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Type of user verification performed for the client authentication."
::= { cpCaptivePortalClientStatusEntry 5 }
cpCaptivePortalClientAssocIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface on which the client was authenticated."
::= { cpCaptivePortalClientStatusEntry 6 }
cpCaptivePortalClientCPID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The captive portal instance on which the client was authenticated."
::= { cpCaptivePortalClientStatusEntry 7 }
cpCaptivePortalClientSessionTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time (in seconds) since the client was authenticated."
::= { cpCaptivePortalClientStatusEntry 8 }
-- object support based on cluster support
cpCaptivePortalClientSwitchMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address of the switch to which the client is authenticated."
::= { cpCaptivePortalClientStatusEntry 9 }
-- object support based on cluster support
cpCaptivePortalClientSwitchIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the switch to which the client is authenticated."
::= { cpCaptivePortalClientStatusEntry 10 }
-- object support based on cluster support
cpCaptivePortalClientSwitchType OBJECT-TYPE
SYNTAX INTEGER {
peer(1),
local(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The switch (peer or local) to which the client is authenticated."
::= { cpCaptivePortalClientStatusEntry 11 }
cpCaptivePortalClientDeauthAction OBJECT-TYPE
SYNTAX INTEGER {
none(1),
start(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is an action object. Setting this object to start will initiate the
deauthentication of authenticated client. Read on this object will always return none."
::= { cpCaptivePortalClientStatusEntry 12 }
-- ------------------------------------
-- cpCaptivePortalClientStatisticsTable
-- ------------------------------------
cpCaptivePortalClientStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpCaptivePortalClientStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of statistics for each active session."
::= { cpCaptivePortalClientStatusGroup 2 }
cpCaptivePortalClientStatisticsEntry OBJECT-TYPE
SYNTAX CpCaptivePortalClientStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Captive portal client statistics entry."
AUGMENTS { cpCaptivePortalClientStatusEntry }
::= { cpCaptivePortalClientStatisticsTable 1 }
CpCaptivePortalClientStatisticsEntry ::= SEQUENCE {
cpCaptivePortalClientBytesReceived
Counter64,
cpCaptivePortalClientBytesTransmitted
Counter64,
cpCaptivePortalClientPacketsReceived
Counter64,
cpCaptivePortalClientPacketsTransmitted
Counter64
}
cpCaptivePortalClientBytesReceived OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of bytes received by this client."
::= { cpCaptivePortalClientStatisticsEntry 1 }
cpCaptivePortalClientBytesTransmitted OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of bytes transmitted by this client."
::= { cpCaptivePortalClientStatisticsEntry 2 }
cpCaptivePortalClientPacketsReceived OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets received by this client."
::= { cpCaptivePortalClientStatisticsEntry 3 }
cpCaptivePortalClientPacketsTransmitted OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets transmitted by this client."
::= { cpCaptivePortalClientStatisticsEntry 4 }
--**************************************************************************************
-- cpCaptivePortalIntfClientAssocGroup
--**************************************************************************************
cpCaptivePortalIntfClientAssocGroup OBJECT IDENTIFIER ::= { cpStatusGroup 6 }
cpCaptivePortalIntfClientAssocTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpCaptivePortalIntfClientAssocEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This database is used to report clients associated with a
particular captive portal interface."
::= { cpCaptivePortalIntfClientAssocGroup 1 }
cpCaptivePortalIntfClientAssocEntry OBJECT-TYPE
SYNTAX CpCaptivePortalIntfClientAssocEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Captive portal interface client status entry."
INDEX { cpCaptivePortalIntfClientIfIndex, cpCaptivePortalIntfClientAssocMacAddress }
::= { cpCaptivePortalIntfClientAssocTable 1 }
CpCaptivePortalIntfClientAssocEntry ::= SEQUENCE {
cpCaptivePortalIntfClientIfIndex
InterfaceIndex,
cpCaptivePortalIntfClientAssocMacAddress
MacAddress,
cpCaptivePortalIntfClientAssocRowStatus
RowStatus
}
cpCaptivePortalIntfClientIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface on which the client was authenticated."
::= { cpCaptivePortalIntfClientAssocEntry 1 }
cpCaptivePortalIntfClientAssocMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address of the workstation from which the client is authenticated."
::= { cpCaptivePortalIntfClientAssocEntry 2 }
cpCaptivePortalIntfClientAssocRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This specifies the row-status of this entry. For a valid entry,
the row-status will return active(1). This is the only supported value."
::= { cpCaptivePortalIntfClientAssocEntry 3 }
--**************************************************************************************
-- cpCaptivePortalInstanceClientAssocGroup
--**************************************************************************************
cpCaptivePortalInstanceClientAssocGroup OBJECT IDENTIFIER ::= { cpStatusGroup 7 }
cpCaptivePortalInstanceClientAssocTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpCaptivePortalInstanceClientAssocEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This database is used to report clients associated with a
particular captive portal instance."
::= { cpCaptivePortalInstanceClientAssocGroup 1 }
cpCaptivePortalInstanceClientAssocEntry OBJECT-TYPE
SYNTAX CpCaptivePortalInstanceClientAssocEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Captive Portal instance client status entry."
INDEX { cpCaptivePortalInstanceClientAssocInstanceId, cpCaptivePortalInstanceClientAssocMacAddress }
::= { cpCaptivePortalInstanceClientAssocTable 1 }
CpCaptivePortalInstanceClientAssocEntry ::= SEQUENCE {
cpCaptivePortalInstanceClientAssocInstanceId
Integer32,
cpCaptivePortalInstanceClientAssocMacAddress
MacAddress,
cpCaptivePortalInstanceClientAssocRowStatus
RowStatus
}
cpCaptivePortalInstanceClientAssocInstanceId OBJECT-TYPE
SYNTAX Integer32 (1..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The instance ID associated with this client."
::= { cpCaptivePortalInstanceClientAssocEntry 1 }
cpCaptivePortalInstanceClientAssocMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address of the workstation from which the client is authenticated."
::= { cpCaptivePortalInstanceClientAssocEntry 2 }
cpCaptivePortalInstanceClientAssocRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This specifies the row-status of this entry. For a valid entry,
the row-status will return active(1). This is the only supported value."
::= { cpCaptivePortalInstanceClientAssocEntry 3 }
--**************************************************************************************
-- cpTrapsConfig
--**************************************************************************************
cpTrapsConfig OBJECT IDENTIFIER ::= { fastPathCaptivePortal 3 }
cpTrapMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object enables/disables the global Captive Portal trap mode.
If this object is disabled, the Captive Portal Client Authentication Failure traps,
Client Connection traps, Client Database Full traps, and Client Disconnection traps
are not sent regardless of their setting."
DEFVAL { disable }
::= { cpTrapsConfig 1 }
cpClientAuthenticationFailureTrapMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Flag to enable/disable client authentication failure SNMP traps."
DEFVAL { disable }
::= { cpTrapsConfig 2 }
cpClientConnectTrapMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Flag to enable/disable client connection SNMP traps."
DEFVAL { disable }
::= { cpTrapsConfig 3 }
cpClientDatabaseFullTrapMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Flag to enable/disable client database full SNMP traps."
DEFVAL { disable }
::= { cpTrapsConfig 4 }
cpClientDisconnectTrapMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Flag to enable/disable client disconnection SNMP traps."
DEFVAL { disable }
::= { cpTrapsConfig 5 }
--**************************************************************************************
-- cpTraps
--**************************************************************************************
cpTraps OBJECT IDENTIFIER ::= { fastPathCaptivePortal 4 }
cpClientAuthenticationFailure NOTIFICATION-TYPE
OBJECTS { cpCaptivePortalClientMacAddress,cpCaptivePortalClientIpAddress,cpCaptivePortalClientCPID,cpCaptivePortalClientAssocIfIndex,cpCaptivePortalClientSwitchMacAddress,cpCaptivePortalClientUserName }
STATUS current
DESCRIPTION
"A cpClientAuthenticationFailure trap signifies that the SNMP entity,
acting in an agent role, has detected a client authentication failure."
::= { cpTraps 1 }
cpClientConnect NOTIFICATION-TYPE
OBJECTS { cpCaptivePortalClientMacAddress,cpCaptivePortalClientAssocIfIndex,cpCaptivePortalClientIpAddress,cpCaptivePortalClientCPID,cpCaptivePortalClientSwitchMacAddress }
STATUS current
DESCRIPTION
"A cpClientConnect trap signifies that the SNMP entity,
acting in an agent role, has detected a client connection."
::= { cpTraps 2 }
cpClientDatabaseFull NOTIFICATION-TYPE
OBJECTS { cpCaptivePortalClientMacAddress }
STATUS current
DESCRIPTION
"A cpClientDatabaseFull trap signifies that the SNMP entity,
acting in an agent role, has detected that client authentication database is full."
::= { cpTraps 3 }
cpClientDisconnect NOTIFICATION-TYPE
OBJECTS { cpCaptivePortalClientMacAddress,cpCaptivePortalClientAssocIfIndex,cpCaptivePortalClientIpAddress,cpCaptivePortalClientCPID,cpCaptivePortalClientSwitchMacAddress }
STATUS current
DESCRIPTION
"A cpClientDisconnect trap signifies that the SNMP entity,
acting in an agent role, has detected a client disconnection."
::= { cpTraps 4 }
--**************************************************************************************
-- cpCaptivePortalConfigWebGroup
--**************************************************************************************
cpCaptivePortalConfigWebGroup OBJECT IDENTIFIER ::= { fastPathCaptivePortal 5 }
cpCaptivePortalConfigWebTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpCaptivePortalConfigWebEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This database is used to web config."
::= { cpCaptivePortalConfigWebGroup 1 }
cpCaptivePortalConfigWebEntry OBJECT-TYPE
SYNTAX CpCaptivePortalConfigWebEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Captive Portal instance client status entry."
INDEX {cpCaptivePortalConfigWebInstanceId,cpCaptivePortalConfigWebWebId}
::= { cpCaptivePortalConfigWebTable 1 }
CpCaptivePortalConfigWebEntry ::= SEQUENCE {
cpCaptivePortalConfigWebInstanceId
Unsigned32,
cpCaptivePortalConfigWebWebId
Unsigned32
}
cpCaptivePortalConfigWebInstanceId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"TThe identifier associated with instance of Captive Portal."
::= { cpCaptivePortalConfigWebEntry 1 }
cpCaptivePortalConfigWebWebId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Web ID associated with this client."
::= { cpCaptivePortalConfigWebEntry 2 }
END
Reference in New Issue Copy Permalink