mibs/MIBS/quanta/fastpath_mvr.my

381 lines
12 KiB
Plaintext
Raw Permalink Normal View History

2023-12-05 12:25:34 +01:00
-- MVR MIB overview:
-- MVR MIB falls under lb6m MIB node of the private subtree.
NETGEAR-MVR-PRIVATE-MIB DEFINITIONS ::= BEGIN
IMPORTS
lb6m FROM QUANTA-LB6M-REF-MIB
TruthValue, TimeInterval, DisplayString, RowStatus
FROM SNMPv2-TC
InterfaceIndex FROM IF-MIB
ifIndex, InterfaceIndex FROM IF-MIB
VlanIndex FROM Q-BRIDGE-MIB
OBJECT-TYPE, MODULE-IDENTITY,IpAddress,Unsigned32
FROM SNMPv2-SMI;
fastpathMvr MODULE-IDENTITY
LAST-UPDATED "201101260000Z" -- 26 January 2011 12:00:00 GMT
ORGANIZATION "Netgear Inc"
CONTACT-INFO ""
DESCRIPTION
"The Netgear Private MIB for MVR Configuration"
-- Revision history.
REVISION
"201101260000Z" -- 26 January 2011 12:00:00 GMT
DESCRIPTION
"Postal address updated."
REVISION
"200910210000Z" -- 21 October 2009 12:00:00 GMT
DESCRIPTION
"Initial version."
::= { lb6m 50 }
--**************************************************************************************
-- mvrGlobalConfig
--**************************************************************************************
mvrGlobalConfig OBJECT IDENTIFIER ::= { fastpathMvr 1 }
mvrAdminMode OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable MVR. The value true(1) indicates that MVR is enabled
A value of false(2) indicates that MVR is disabled."
DEFVAL { false }
::= { mvrGlobalConfig 1 }
mvrModeType OBJECT-TYPE
SYNTAX INTEGER{
compatible(1),
dynamic(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Shows/Changes MVR mode.
The value compatible(1) indicates that compatible mode is enabled.
A value of dynamic(2) indicates that dynamic mode is enabled."
DEFVAL { compatible }
::= {mvrGlobalConfig 2 }
mvrMulticastVlanId OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Shows/Changes the Multicast Vlan number."
DEFVAL { 1 }
::= { mvrGlobalConfig 3 }
mvrMaxMulticastGroupsCount OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of multicast groups that is supported by MVR."
::= { mvrGlobalConfig 4 }
mvrCurrentMulticastGroupsCount OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current number of MVR groups allocated."
::= { mvrGlobalConfig 5 }
mvrQueryTime OBJECT-TYPE
SYNTAX TimeInterval(1..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Shows/Changes the MVR Query time, in centiseconds."
DEFVAL { 5 }
::= { mvrGlobalConfig 6 }
--**************************************************************************************
-- mvrPortTable
--**************************************************************************************
mvrPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF MvrPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of MVR control information about every bridge port.
This is indexed by mvrBasePort."
::= { fastpathMvr 2 }
mvrPortEntry OBJECT-TYPE
SYNTAX MvrPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MVR control information for a bridge port."
INDEX { ifIndex }
::= { mvrPortTable 1 }
MvrPortEntry ::= SEQUENCE {
mvrPortMvrEnabled
TruthValue,
mvrPortType
INTEGER,
mvrPortImmediateLeaveMode
TruthValue,
mvrPortStatus
INTEGER
}
mvrPortMvrEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable\Disable MVR on port. The value true(1) indicates that MVR is enabled.
A value of false(2) indicates that MVR is disabled."
DEFVAL { false }
::= { mvrPortEntry 1 }
mvrPortType OBJECT-TYPE
SYNTAX INTEGER{
source(1),
receiver(2),
none(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"MVR Interface type."
DEFVAL { none }
::= { mvrPortEntry 2 }
mvrPortImmediateLeaveMode OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Shows/Changes Immediate Leave mode for MVR port.
The value true(1) indicates that the port is in Immediate Leave mode.
A value of false(2) indicates that the port is not in Immediate Leave mode."
DEFVAL { false }
::= { mvrPortEntry 3}
mvrPortStatus OBJECT-TYPE
SYNTAX INTEGER{
activeInVlan(1),
activeNotInVlan(2),
inactiveInVlan(3),
inactiveNotInVlan(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface status."
::= { mvrPortEntry 4 }
--**************************************************************************************
-- mvrGroupsTable
--**************************************************************************************
mvrGroupsTable OBJECT-TYPE
SYNTAX SEQUENCE OF MvrGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of MVR groups."
::= { fastpathMvr 3 }
mvrGroupEntry OBJECT-TYPE
SYNTAX MvrGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "MVR information of membership group."
INDEX { mvrGroupIPAddress}
::= { mvrGroupsTable 1 }
MvrGroupEntry::= SEQUENCE {
mvrGroupIPAddress
IpAddress,
mvrGroupStatus
INTEGER,
mvrGroupRowStatus
RowStatus
}
mvrGroupIPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The multicast Group IP address."
::= { mvrGroupEntry 1 }
mvrGroupStatus OBJECT-TYPE
SYNTAX INTEGER{
active(1),
inactive(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the specific MVR group."
::= { mvrGroupEntry 2 }
mvrGroupRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.To create a row in this table,
a manager must set this object to 'createAndGo'(4) .To delete a row in
this table, a manager must set this object to `destroy'(6)"
::= { mvrGroupEntry 3 }
--**************************************************************************************
-- mvrPortMembershipTable
--**************************************************************************************
mvrPortMembershipTable OBJECT-TYPE
SYNTAX SEQUENCE OF MvrPortMembershipEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of MVR membership groups."
::= { fastpathMvr 4 }
mvrPortMembershipEntry OBJECT-TYPE
SYNTAX MvrPortMembershipEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "MVR information of membership group."
INDEX { mvrPortMembershipGroupIPAddress, mvrPortMembershipPortIfIndex}
::= { mvrPortMembershipTable 1 }
MvrPortMembershipEntry::= SEQUENCE {
mvrPortMembershipGroupIPAddress
IpAddress,
mvrPortMembershipPortIfIndex
InterfaceIndex,
mvrPortMembershipRowStatus
RowStatus
}
mvrPortMembershipGroupIPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The multicast Group IP address."
::= { mvrPortMembershipEntry 1 }
mvrPortMembershipPortIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Interface index in 'ifTable'."
::= { mvrPortMembershipEntry 2 }
mvrPortMembershipRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.To create a row in this table,
a manager must set this object to 'createAndGo'(4) .To delete a row in
this table, a manager must set this object to `destroy'(6)"
::= { mvrPortMembershipEntry 3 }
--**************************************************************************************
-- mvrStatistics
--**************************************************************************************
mvrStatistics OBJECT IDENTIFIER ::= { fastpathMvr 5 }
mvrIGMPQueryReceived OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of received IGMP Queries. "
::= { mvrStatistics 1 }
mvrIGMPReportV1Received OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of received IGMP Reports V1. "
::= { mvrStatistics 2 }
mvrIGMPReportV2Received OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of received IGMP Reports V1. "
::= { mvrStatistics 3 }
mvrIGMPLeaveReceived OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of received IGMP Leaves. "
::= { mvrStatistics 4 }
mvrIGMPQueryTransmitted OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of transmitted IGMP Queries. "
::= { mvrStatistics 5 }
mvrIGMPReportV1Transmitted OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of transmitted IGMP Reports V1. "
::= { mvrStatistics 6 }
mvrIGMPReportV2Transmitted OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of transmitted IGMP Reports V2. "
::= { mvrStatistics 7 }
mvrIGMPLeaveTransmitted OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of transmitted IGMP Leaves. "
::= { mvrStatistics 8 }
mvrIGMPPacketReceiveFailures OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of failures on receiving the IGMP packets. "
::= { mvrStatistics 9 }
mvrIGMPPacketTransmitFailures OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of failures on transmitting the IGMP packets. "
::= { mvrStatistics 10 }
END