mibs/MIBS/quanta/fastpathbgp.my

1040 lines
36 KiB
Plaintext
Raw Permalink Normal View History

2023-12-05 12:25:34 +01:00
NETGEAR-BGP-MIB DEFINITIONS ::= BEGIN
-- Netgear Inc Border Gateway Protocol Package MIB
-- Copyright Netgear Inc (2002-2007) All rights reserved.
-- This SNMP Management Information Specification
-- embodies Netgear Inc's confidential and proprietary
-- intellectual property. Netgear Inc retains all title
-- and ownership in the Specification including any revisions.
-- This Specification is supplied "AS IS", Netgear Inc
-- makes no warranty, either expressed or implied,
-- as to the use, operation, condition, or performance of the
-- Specification.
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Integer32, Unsigned32, Gauge32, Counter32, IpAddress, TimeTicks
FROM SNMPv2-SMI
TEXTUAL-CONVENTION, TruthValue FROM SNMPv2-TC
lb6m FROM QUANTA-LB6M-REF-MIB
DisplayString FROM RFC1213-MIB;
fastPathBGP MODULE-IDENTITY
LAST-UPDATED "201101260000Z" -- 26 Jan 2011 12:00:00 GMT
ORGANIZATION "Netgear Inc"
CONTACT-INFO ""
DESCRIPTION
"The MIB definitions for Border Gateway Protocol Flex package."
-- Revision history.
REVISION
"201101260000Z" -- 26 Jan 2011 12:00:00 GMT
DESCRIPTION
"Postal address updated."
REVISION
"200705230000Z" -- 23 May 2007 12:00:00 GMT
DESCRIPTION
"Netgear branding related changes."
REVISION
"200311210000Z" -- 21 Nov 2003 12:00:00 GMT
DESCRIPTION
"Revisions made for new release."
REVISION
"200303282030Z"
DESCRIPTION
"Initial revision."
::= { lb6m 5 }
--****************************************************************
-- agentBGPQueueGroup
--
--****************************************************************
agentBGPQueueGroup OBJECT IDENTIFIER ::= { fastPathBGP 1 }
--**********************************************************
-- BGP work queues table. The BGP protocol executes on a single
-- thread, doing work received on several work queues.
--
--**********************************************************
agentBGPQueueTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentBGPQueueEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table lists information about BGP work queue utilization."
::= { agentBGPQueueGroup 1 }
agentBGPQueueEntry OBJECT-TYPE
SYNTAX AgentBGPQueueEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information on a specific BGP work queue."
INDEX { agentBGPQueueIndex }
::= { agentBGPQueueTable 1 }
AgentBGPQueueEntry ::= SEQUENCE {
agentBGPQueueIndex
Unsigned32,
agentBGPQueueName
DisplayString,
agentBGPQueueLength
Gauge32,
agentBGPQueueHigh
Gauge32,
agentBGPQueueDrops
Counter32,
agentBGPQueueLimit
Unsigned32
}
agentBGPQueueIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index value for this work queue."
::= { agentBGPQueueEntry 1 }
agentBGPQueueName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Name of an BGP work queue."
::= { agentBGPQueueEntry 2 }
agentBGPQueueLength OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of items currently in the work queue."
::= { agentBGPQueueEntry 3 }
agentBGPQueueHigh OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The high water mark of the number of items in the work queue."
::= { agentBGPQueueEntry 4 }
agentBGPQueueDrops OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of items dropped because the work queue was full."
::= { agentBGPQueueEntry 5 }
agentBGPQueueLimit OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of items this queue can hold."
::= { agentBGPQueueEntry 6 }
--****************************************************************
-- BGP global counters table. Global counts of messages sent and
-- received of each message type.
--
--****************************************************************
agentBGPMessageStatsGroup OBJECT IDENTIFIER ::= { fastPathBGP 2 }
agentBGPCountersCleared OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time since BGP counters were last cleared, in seconds."
::= { agentBGPMessageStatsGroup 1 }
agentBGPInOpens OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of BGP OPEN messages received since BGP counters were last cleared."
::= { agentBGPMessageStatsGroup 2 }
agentBGPOutOpens OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of BGP OPEN messages transmitted since BGP counters were last cleared."
::= { agentBGPMessageStatsGroup 3 }
agentBGPInUpdates OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of BGP UPDATE messages received since BGP counters were last cleared."
::= { agentBGPMessageStatsGroup 4 }
agentBGPOutUpdates OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of BGP UPDATE messages transmitted since BGP counters were last cleared."
::= { agentBGPMessageStatsGroup 5 }
agentBGPInNotifications OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of BGP NOTIFICATION messages received since BGP counters were last cleared."
::= { agentBGPMessageStatsGroup 6 }
agentBGPOutNotifications OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of BGP NOTIFICATION messages transmitted since BGP counters were last cleared."
::= { agentBGPMessageStatsGroup 7 }
agentBGPInKeepalives OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of BGP KEEPALIVE messages received since BGP counters were last cleared."
::= { agentBGPMessageStatsGroup 8 }
agentBGPOutKeepalives OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of BGP KEEPALIVE messages transmitted since BGP counters were last cleared."
::= { agentBGPMessageStatsGroup 9 }
agentBGPInRouteRefreshes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of BGP ROUTE REFRESH messages received since BGP counters were last cleared."
::= { agentBGPMessageStatsGroup 10 }
agentBGPOutRouteRefreshes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of BGP ROUTE REFRESH messages transmitted since BGP counters were last cleared."
::= { agentBGPMessageStatsGroup 11 }
agentBGPInUpdatesMax OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum rate of BGP UPDATE messages received. The rate is given in
packets per second."
::= { agentBGPMessageStatsGroup 12 }
agentBGPOutUpdatesMax OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum rate of BGP UPDATE messages transmitted. The rate is
given in packets per second."
::= { agentBGPMessageStatsGroup 13 }
--****************************************************************
-- BGP Decision process table
--
--************************************************************
agentBGPDecProcTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentBGPDecProcEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains information about the twenty most recent
executions of any of the three decision process phases.
The most recent information is at the end of the table.
This table is applicable to IPv4 address family only."
::= { fastPathBGP 3}
agentBGPDecProcEntry OBJECT-TYPE
SYNTAX AgentBGPDecProcEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about execution of a single decision process phase."
INDEX { agentBGPDecProcIndex }
::= { agentBGPDecProcTable 1 }
AgentBGPDecProcEntry ::= SEQUENCE {
agentBGPDecProcIndex
Counter32,
agentBGPDecProcDeltaT
Unsigned32,
agentBGPDecProcPhase
Unsigned32,
agentBGPDecProcUpdateGroup
Unsigned32,
agentBGPDecProcGenId
Unsigned32,
agentBGPDecProcReason
DisplayString,
agentBGPDecProcPeer
IpAddress,
agentBGPDecProcDuration
Gauge32,
agentBGPDecProcAdds
Gauge32,
agentBGPDecProcMods
Gauge32,
agentBGPDecProcDels
Gauge32
}
agentBGPDecProcIndex OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Integer that uniquely identifies a decision process run.
This value is incremented each time BGP runs one phase of the decision process."
::= { agentBGPDecProcEntry 1 }
agentBGPDecProcDeltaT OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"How long since this decision process ran. The time is
given in seconds."
::= { agentBGPDecProcEntry 2 }
agentBGPDecProcPhase OBJECT-TYPE
SYNTAX Unsigned32 (1..3)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Which of the three decision process phases was run."
::= { agentBGPDecProcEntry 3 }
agentBGPDecProcUpdateGroup OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable is only valid when agentBGPDecProcPhase is 3. When the phase is 3,
this variable identifies the outbound update group for which phase 3 was run.
When the variable has a value of 65535 then it means that the corresponding
agentBGPDecProcEntry does not belong to any outbound update group"
::= { agentBGPDecProcEntry 4 }
agentBGPDecProcGenId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The global generation ID when the decision process ran."
::= { agentBGPDecProcEntry 5 }
agentBGPDecProcReason OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Reason why the decision process was run."
::= { agentBGPDecProcEntry 6 }
agentBGPDecProcPeer OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable is only valid when phase 1 is run for a single peer.
In this case, this variable is the IP address of the peer for which phase 1 was run."
::= { agentBGPDecProcEntry 7 }
agentBGPDecProcDuration OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"How long the decision process ran. Milliseconds."
::= { agentBGPDecProcEntry 8 }
agentBGPDecProcAdds OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of prefixes added during the decision process. For phase 1,
this is the number of prefixes that pass inbound policy. For phase 2,
this is the number of prefixes added to the BGP routing table.
For phase 3, this is the number of prefixes added to the Adj-RIB-Out."
::= { agentBGPDecProcEntry 9 }
agentBGPDecProcMods OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of prefixes modified during the decision process. For phase 1,
this is the number of prefixes that pass inbound policy. For phase 2,
this is the number of routes modified. For phase 3,
this is the number of routes modified in the Adj-RIB-Out."
::= { agentBGPDecProcEntry 10 }
agentBGPDecProcDels OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of prefixes deleted during the decision process. For phase 1,
this is the number of prefixes that previously passed inbound policy
but no longer pass. For phase 2, this is the number of prefixes removed
from the BGP routing table. For phase 3, this is the number of prefixes
removed from the Adj-RIB-Out."
::= { agentBGPDecProcEntry 11 }
agentBGPDecProcIPv6Table OBJECT-TYPE
SYNTAX SEQUENCE OF AgentBGPDecProcIPv6Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains information about the twenty most recent
executions of any of the three decision process phases.
The most recent information is at the end of the table.
This table is applicable to IPv6 address family only."
::= { fastPathBGP 5}
agentBGPDecProcIPv6Entry OBJECT-TYPE
SYNTAX AgentBGPDecProcIPv6Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about execution of a single decision process phase."
INDEX { agentBGPDecProcIPv6Index }
::= { agentBGPDecProcIPv6Table 1 }
AgentBGPDecProcIPv6Entry ::= SEQUENCE {
agentBGPDecProcIPv6Index
Counter32,
agentBGPDecProcDeltaTIPv6
Unsigned32,
agentBGPDecProcPhaseIPv6
Unsigned32,
agentBGPDecProcUpdateGroupIPv6
Unsigned32,
agentBGPDecProcGenIdIPv6
Unsigned32,
agentBGPDecProcReasonIPv6
DisplayString,
agentBGPDecProcPeerIPv6
IpAddress,
agentBGPDecProcDurationIPv6
Gauge32,
agentBGPDecProcAddsIPv6
Gauge32,
agentBGPDecProcModsIPv6
Gauge32,
agentBGPDecProcDelsIPv6
Gauge32
}
agentBGPDecProcIPv6Index OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Integer that uniquely identifies a decision process run.
This value is incremented each time BGP runs one phase of the decision process."
::= { agentBGPDecProcIPv6Entry 1 }
agentBGPDecProcDeltaTIPv6 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"How long since this decision process ran. The time is
given in seconds."
::= { agentBGPDecProcIPv6Entry 2 }
agentBGPDecProcPhaseIPv6 OBJECT-TYPE
SYNTAX Unsigned32 (1..3)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Which of the three decision process phases was run."
::= { agentBGPDecProcIPv6Entry 3 }
agentBGPDecProcUpdateGroupIPv6 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable is only valid when agentBGPDecProcPhase is 3. When the phase is 3,
this variable identifies the outbound update group for which phase 3 was run.
When the variable has a value of 65535 then it means that the corresponding
agentBGPDecProcIPv6Entry does not belong to any outbound update group"
::= { agentBGPDecProcIPv6Entry 4 }
agentBGPDecProcGenIdIPv6 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The global generation ID when the decision process ran."
::= { agentBGPDecProcIPv6Entry 5 }
agentBGPDecProcReasonIPv6 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Reason why the decision process was run."
::= { agentBGPDecProcIPv6Entry 6 }
agentBGPDecProcPeerIPv6 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable is only valid when phase 1 is run for a single peer.
In this case, this variable is the IP address of the peer for which phase 1 was run."
::= { agentBGPDecProcIPv6Entry 7 }
agentBGPDecProcDurationIPv6 OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"How long the decision process ran. Milliseconds."
::= { agentBGPDecProcIPv6Entry 8 }
agentBGPDecProcAddsIPv6 OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of prefixes added during the decision process. For phase 1,
this is the number of prefixes that pass inbound policy. For phase 2,
this is the number of prefixes added to the BGP routing table.
For phase 3, this is the number of prefixes added to the Adj-RIB-Out."
::= { agentBGPDecProcIPv6Entry 9 }
agentBGPDecProcModsIPv6 OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of prefixes modified during the decision process. For phase 1,
this is the number of prefixes that pass inbound policy. For phase 2,
this is the number of routes modified. For phase 3,
this is the number of routes modified in the Adj-RIB-Out."
::= { agentBGPDecProcIPv6Entry 10 }
agentBGPDecProcDelsIPv6 OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of prefixes deleted during the decision process. For phase 1,
this is the number of prefixes that previously passed inbound policy
but no longer pass. For phase 2, this is the number of prefixes removed
from the BGP routing table. For phase 3, this is the number of prefixes
removed from the Adj-RIB-Out."
::= { agentBGPDecProcIPv6Entry 11 }
--****************************************************************
-- BGP peer table. Augments the peer table in the standard MIB.
--
--************************************************************
agentBGPPeerTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentBGPPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"BGP peer table. This table contains,
one entry per BGP peer, information about
connections with BGP peers."
::= { fastPathBGP 4 }
agentBGPPeerEntry OBJECT-TYPE
SYNTAX AgentBGPPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry containing information about the
connection with a BGP peer."
INDEX { agentBGPPeerRemoteAddr }
::= { agentBGPPeerTable 1 }
AgentBGPPeerEntry ::= SEQUENCE {
agentBGPPeerRemoteAddr
IpAddress,
agentBGPPeerInOpens
Counter32,
agentBGPPeerOutOpens
Counter32,
agentBGPPeerInUpdates
Counter32,
agentBGPPeerOutUpdates
Counter32,
agentBGPPeerInNotifications
Counter32,
agentBGPPeerOutNotifications
Counter32,
agentBGPPeerInKeepalives
Counter32,
agentBGPPeerOutKeepalives
Counter32,
agentBGPPeerInRouteRefreshes
Counter32,
agentBGPPeerOutRouteRefreshes
Counter32,
agentBGPPeerInTotalMessages
Counter32,
agentBGPPeerOutTotalMessages
Counter32,
agentBGPPeerUpdateQueueLen
Gauge32,
agentBGPPeerUpdateQueueHigh
Gauge32,
agentBGPPeerUpdateQueueLimit
Unsigned32,
agentBGPPeerUpdateQueueDrops
Counter32,
agentBGPPeerInPfxAdv
Counter32,
agentBGPPeerOutPfxAdv
Counter32,
agentBGPPeerInPfxWithdrawn
Counter32,
agentBGPPeerOutPfxWithdrawn
Counter32,
agentBGPPeerInPfxCurrent
Gauge32,
agentBGPPeerOutPfxCurrent
Gauge32,
agentBGPPeerInPfxAccepted
Gauge32,
agentBGPPeerInPfxRejected
Gauge32,
agentBGPPeerInMaxNlriPerUpdate
Gauge32,
agentBGPPeerOutMaxNlriPerUpdate
Gauge32,
agentBGPPeerInMinNlriPerUpdate
Gauge32,
agentBGPPeerOutMinNlriPerUpdate
Gauge32,
agentBGPPeerInPfxAdvIPv6
Counter32,
agentBGPPeerOutPfxAdvIPv6
Counter32,
agentBGPPeerInPfxWithdrawnIPv6
Counter32,
agentBGPPeerOutPfxWithdrawnIPv6
Counter32,
agentBGPPeerInPfxCurrentIPv6
Gauge32,
agentBGPPeerOutPfxCurrentIPv6
Gauge32,
agentBGPPeerInPfxAcceptedIPv6
Gauge32,
agentBGPPeerInPfxRejectedIPv6
Gauge32,
agentBGPPeerInMaxNlriPerUpdateIPv6
Gauge32,
agentBGPPeerOutMaxNlriPerUpdateIPv6
Gauge32,
agentBGPPeerInMinNlriPerUpdateIPv6
Gauge32,
agentBGPPeerOutMinNlriPerUpdateIPv6
Gauge32
}
agentBGPPeerRemoteAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The remote IP address of this entry's BGP
peer."
::= { agentBGPPeerEntry 1 }
agentBGPPeerInOpens OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of BGP OPEN messages received from
this peer."
::= { agentBGPPeerEntry 2 }
agentBGPPeerOutOpens OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of BGP OPEN messages transmitted to
this peer."
::= { agentBGPPeerEntry 3 }
agentBGPPeerInUpdates OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of BGP UPDATE messages
received from this peer."
::= { agentBGPPeerEntry 4 }
agentBGPPeerOutUpdates OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of BGP UPDATE messages
transmitted to this peer."
::= { agentBGPPeerEntry 5 }
agentBGPPeerInNotifications OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of BGP NOTIFICATION messages
received from this peer."
::= { agentBGPPeerEntry 6 }
agentBGPPeerOutNotifications OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of BGP NOTIFICATION messages
transmitted to this peer."
::= { agentBGPPeerEntry 7 }
agentBGPPeerInKeepalives OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of BGP KEEPALIVE messages
received from this peer."
::= { agentBGPPeerEntry 8 }
agentBGPPeerOutKeepalives OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of BGP KEEPALIVE messages
transmitted to this peer."
::= { agentBGPPeerEntry 9 }
agentBGPPeerInRouteRefreshes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of BGP ROUTE REFRESH messages
received from this peer."
::= { agentBGPPeerEntry 10 }
agentBGPPeerOutRouteRefreshes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of BGP ROUTE REFRESH messages
transmitted to this peer."
::= { agentBGPPeerEntry 11 }
agentBGPPeerInTotalMessages OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of BGP messages of all types
received from this peer."
::= { agentBGPPeerEntry 12 }
agentBGPPeerOutTotalMessages OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of BGP messages of all types
transmitted to this peer."
::= { agentBGPPeerEntry 13 }
agentBGPPeerUpdateQueueLen OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"After receiving a BGP UPDATE message, BGP places each UPDATE on a per-neighbor
queue before processing the UPDATE. This variable gives the current length
of this peer's UPDATE queue, in bytes."
::= { agentBGPPeerEntry 14 }
agentBGPPeerUpdateQueueHigh OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum length (or high water mark) of this peer.s UPDATE queue, in bytes."
::= { agentBGPPeerEntry 15 }
agentBGPPeerUpdateQueueLimit OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of bytes of received UPDATE messages that may be queued for this peer at any given time."
::= { agentBGPPeerEntry 16 }
agentBGPPeerUpdateQueueDrops OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of UPDATE messages from this peer that could not be added to
the UPDATE queue because the queue was full."
::= { agentBGPPeerEntry 17 }
agentBGPPeerInPfxAdv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of IPv4 prefixes received from this peer."
::= { agentBGPPeerEntry 18 }
agentBGPPeerOutPfxAdv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of IPv4 prefixes advertised to this peer."
::= { agentBGPPeerEntry 19 }
agentBGPPeerInPfxWithdrawn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of IPv4 prefixes this peer has withdrawn."
::= { agentBGPPeerEntry 20 }
agentBGPPeerOutPfxWithdrawn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of IPv4 prefixes this router has withdrawn in UPDATE messages to this peer."
::= { agentBGPPeerEntry 21 }
agentBGPPeerInPfxCurrent OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of IPv4 prefixes this peer is currently advertising to this
router and that have passed inbound policy."
::= { agentBGPPeerEntry 22 }
agentBGPPeerOutPfxCurrent OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of IPv4 prefixes this router is currently advertising to this peer."
::= { agentBGPPeerEntry 23 }
agentBGPPeerInPfxAccepted OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of IPv4 prefixes received from this peer that may be considered to be
included in the BGP route table. This includes all current prefixes whose
path does not have an AS path loop and whose BGP NEXT HOP is resolved."
::= { agentBGPPeerEntry 24 }
agentBGPPeerInPfxRejected OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of IPv4 prefixes from this peer that did not pass inbound policy."
::= { agentBGPPeerEntry 25 }
agentBGPPeerInMaxNlriPerUpdate OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of IPv4 prefixes in any single UPDATE message from this peer."
::= { agentBGPPeerEntry 26 }
agentBGPPeerOutMaxNlriPerUpdate OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of IPv4 prefixes in any single UPDATE message sent to this peer."
::= { agentBGPPeerEntry 27 }
agentBGPPeerInMinNlriPerUpdate OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum number of IPv4 prefixes in any single UPDATE message from this peer."
::= { agentBGPPeerEntry 28 }
agentBGPPeerOutMinNlriPerUpdate OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum number of IPv4 prefixes in any single UPDATE message sent to this peer."
::= { agentBGPPeerEntry 29 }
agentBGPPeerInPfxAdvIPv6 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of IPv6 prefixes received from this peer."
::= { agentBGPPeerEntry 30 }
agentBGPPeerOutPfxAdvIPv6 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of IPv6 prefixes advertised to this peer."
::= { agentBGPPeerEntry 31 }
agentBGPPeerInPfxWithdrawnIPv6 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of IPv6 prefixes this peer has withdrawn."
::= { agentBGPPeerEntry 32 }
agentBGPPeerOutPfxWithdrawnIPv6 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of IPv6 prefixes this router has withdrawn in UPDATE messages to this peer."
::= { agentBGPPeerEntry 33 }
agentBGPPeerInPfxCurrentIPv6 OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of IPv6 prefixes this peer is currently advertising to this
router and that have passed inbound policy."
::= { agentBGPPeerEntry 34 }
agentBGPPeerOutPfxCurrentIPv6 OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of IPv6 prefixes this router is currently advertising to this peer."
::= { agentBGPPeerEntry 35 }
agentBGPPeerInPfxAcceptedIPv6 OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of IPv6 prefixes received from this peer that may be considered to be
included in the BGP route table. This includes all current prefixes whose
path does not have an AS path loop and whose BGP NEXT HOP is resolved."
::= { agentBGPPeerEntry 36 }
agentBGPPeerInPfxRejectedIPv6 OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of IPv6 prefixes from this peer that did not pass inbound policy."
::= { agentBGPPeerEntry 37 }
agentBGPPeerInMaxNlriPerUpdateIPv6 OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of IPv6 prefixes in any single UPDATE message from this peer."
::= { agentBGPPeerEntry 38 }
agentBGPPeerOutMaxNlriPerUpdateIPv6 OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of IPv6 prefixes in any single UPDATE message sent to this peer."
::= { agentBGPPeerEntry 39 }
agentBGPPeerInMinNlriPerUpdateIPv6 OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum number of IPv6 prefixes in any single UPDATE message from this peer."
::= { agentBGPPeerEntry 40 }
agentBGPPeerOutMinNlriPerUpdateIPv6 OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum number of IPv6 prefixes in any single UPDATE message sent to this peer."
::= { agentBGPPeerEntry 41 }
--**************************************************************************************
-- agentBGPSnmpTrapFlagsConfigGroup
--
--**************************************************************************************
agentBGPSnmpTrapFlagsConfigGroup OBJECT IDENTIFIER ::= { fastPathBGP 6 }
agentBGPSnmpAllTrapFlag OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable standard traps defined in RFC 4273."
::= { agentBGPSnmpTrapFlagsConfigGroup 1 }
END