david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
main
mibs/MIBS/quanta/fastpathsntp.my

785 lines
28 KiB
Plaintext
Raw Permalink Normal View History

Initial commit
2023-12-05 12:25:34 +01:00
NETGEAR-SNTP-CLIENT-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, Counter32, Gauge32
FROM SNMPv2-SMI
TEXTUAL-CONVENTION, RowStatus, DateAndTime FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF
InetAddressType, InetAddress, InetPortNumber FROM INET-ADDRESS-MIB
lb6m FROM QUANTA-LB6M-REF-MIB
InterfaceIndexOrZero FROM IF-MIB;
agentSntpClientMIB MODULE-IDENTITY
LAST-UPDATED "201112140000Z" -- 14 Dec 2011 12:00:00 GMT
ORGANIZATION "Netgear Inc"
CONTACT-INFO ""
DESCRIPTION
"This MIB module defines a portion of the SNMP MIB under
the Netgear Inc enterprise OID pertaining to
SNTP client configuration and statistical collection."
-- Revision history.
REVISION
"201410290000Z" -- 03 Nov 2014 12:00:00 GMT
DESCRIPTION
"sntp server KoD Rate Exceeded State Added."
REVISION
"201112140000Z" -- 14 Dec 2011 12:00:00 GMT
DESCRIPTION
"sntp source interface object added."
REVISION
"201101260000Z" -- 26 Jan 2011 12:00:00 GMT
DESCRIPTION
"Postal address updated."
REVISION
"200705230000Z" -- 23 May 2007 12:00:00 GMT
DESCRIPTION
"Netgear branding related changes."
REVISION
"200312181629Z" -- Fri Dec 18 16:29 GMT 2003
DESCRIPTION
"Initial version of this MIB module."
::= { lb6m 17 }
-- -------------------------------------------------------------
-- Textual Conventions
-- -------------------------------------------------------------
SntpClientAdminMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"An SNTP client may operate in any of several modes.
At least one mode other than disabled must be supported
by a client.
disabled
- SNTP is not administrative. No SNTP requests are sent
from the client nor are any received SNTP messages
processed.
unicast
- SNTP operates in a point-to-point fashion. A unicast
client sends a request to a designated server
at its unicast address and expects a reply from which
it can determine the time and, optionally, the
round-trip delay and local clock offset relative to the
server.
broadcast
- SNTP operates using the local broadcast address.
The broadcast address has a single subnet scope.
The SNTP server uses a broadcast address to send
unsolicited SNTP messages to clients. The client
listens on this address and sends no requests for
updates. The broadcast address is determined
by the address and netmask of the service port over
which the SNTP client is operating.
multicast
- SNTP operates in a point-to-multipoint fashion. A
multicast client listens on the dedicated broadcast
address or multicast group address."
REFERENCE
"RFC 2030 - Simple Network Time Protocol (SNTP) Version 4
for IPv4, IPv6 and OSI; Section 2."
SYNTAX BITS {
disabled(0),
unicast(1),
broadcast(2),
multicast(3)
}
SntpClientUpdateStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The status of the last received response or broadcast from a
configured server. These values are appropriate for all
administrative modes.
other
- None of the following enumeration values.
success
- The SNTP operation was successful and the system time
was updated.
requestTimedOut
- An SNTP poll request timed out without receiving a
response from the SNTP server.
badDateEncoded
- The time provided by the SNTP server was not valid.
versionNotSupported
- The SNTP version supported by the server is not compatible
with the version supported by the client. This is indicated
by the server returning a version later than the version
configured for that server or a version of '0'.
serverUnsychronized
- The SNTP server is not synchronized with its peers. This
is indicated via the 'leap indicator' field on the SNTP
message.
serverKissOfDeath
- The SNTP server indicated that no further polls are to be
sent to this server. This is indicated by a stratum field
field equal to 0 in a message received from a server.
serverKoDRateExceeded
- The SNTP server has temporarily denied access because
the client exceeded the rate threshold."
REFERENCE
"RFC 2030 - Simple Network Time Protocol (SNTP) Version 4
for IPv4, IPv6 and OSI; Section 4."
SYNTAX INTEGER {
other(1),
success(2),
requestTimedOut(3),
badDateEncoded(4),
versionNotSupported(5),
serverUnsychronized(6),
serverKissOfDeath(7),
serverKoDRateExceeded(8)
}
-- -------------------------------------------------------------
-- MIB Objects
-- -------------------------------------------------------------
agentSntpClientObjects OBJECT IDENTIFIER ::= { agentSntpClientMIB 1 }
agentSntpClient OBJECT IDENTIFIER
::= { agentSntpClientObjects 1 }
agentSntpClientUnicast OBJECT IDENTIFIER
::= { agentSntpClientObjects 2 }
agentSntpClientBroadcast OBJECT IDENTIFIER
::= { agentSntpClientObjects 3 }
-- -------------------------------------------------------------
-- SNTP Client Group
-- -------------------------------------------------------------
agentSntpClientVersion OBJECT-TYPE
SYNTAX INTEGER {
version1(1),
version2(2),
version3(3),
version4(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The highest SNTP version this client supports. Per
RFC 2030, higher versions are required to be backwards
compatible with all lower versions with the exception of
version 0."
REFERENCE
"RFC 2030 - Simple Network Time Protocol (SNTP) Version 4
for IPv4, IPv6 and OSI; Section 5."
::= { agentSntpClient 1 }
agentSntpClientSupportedMode OBJECT-TYPE
SYNTAX SntpClientAdminMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The SNTP client administrative modes that this device supports.
A client may support more than one administrative mode."
::= { agentSntpClient 2 }
agentSntpClientMode OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
unicast(1),
broadcast(2),
multicast(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The current administrative mode of the SNTP client. A SET
of this object will cause the SNTP client to change
administrative modes. A SET request MUST have only 1 bit
set since is not possible to operate in multiple modes
simultaneously. SETs of this object are limited
to values supported by the device as specified by
agentSntpClientSupportedMode."
DEFVAL { disabled }
::= { agentSntpClient 3 }
agentSntpClientPort OBJECT-TYPE
SYNTAX InetPortNumber (123|1025..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The local port number used to listen for broadcasts and
responses from servers."
DEFVAL { 123 }
::= { agentSntpClient 4 }
agentSntpClientLastUpdateTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The local date and time that the SNTP client last updated the
system time on the device since agent reboot. This time is
updated for all non-disabled administrative modes of the SNTP
client. If the SNTP client has not updated the time then
the client MUST return '00000000'H."
DEFVAL { '00000000'H }
::= { agentSntpClient 5 }
agentSntpClientLastAttemptTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The local date and time of the last SNTP request or
unsolicited SNTP message for this SNTP client since agent
reboot. This value is a timestamp for the
agentSntpClientLastAttemptStatus object. When the
agentSntpClientLastAttemptStatus has a value of success(2),
this object's value should be equal to the value returned by
agentSntpClientLastUpdateTime. If no SNTP frames have been
processed by the SNTP client then the client MUST return
'00000000'H. This object is updated for all non-disabled
administrative modes of the SNTP client."
DEFVAL { '00000000'H }
::= { agentSntpClient 6 }
agentSntpClientLastAttemptStatus OBJECT-TYPE
SYNTAX SntpClientUpdateStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the last SNTP request or unsolicited SNTP
message for this SNTP client since agent reboot. The status is
updated for all non-disabled administrative modes of the SNTP
client."
DEFVAL { other }
::= { agentSntpClient 7 }
agentSntpClientServerAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address type of the SNTP server as identified
by the last received packet. Support for all address
types is NOT REQUIRED."
::= { agentSntpClient 8 }
agentSntpClientServerAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE(1..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The encoded address of the SNTP server as identified
by the last received packet."
::= { agentSntpClient 9 }
agentSntpClientServerMode OBJECT-TYPE
SYNTAX Unsigned32 (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is a 3-bit integer identifying the mode of the server as
indicated in the last received packet with values defined as
follows:
Mode Meaning
------------------------------------
0 reserved
1 symmetric active
2 symmetric passive
3 client
4 server
5 broadcast
6 reserved for NTP control message
7 reserved for private use "
::= { agentSntpClient 10 }
agentSntpClientServerStratum OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is an 8-bit integer identifying the stratum of the server as
indicated in the last received packet with values defined as
follows:
Stratum Meaning
------------------------------------
0 unspecified
1 primary reference
2-15 secondary reference
16-255 reserved"
::= { agentSntpClient 11 }
agentSntpClientServerRefClkId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(4))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the value of the Reference Identifier in the last
received packet defined as follows.
Reference Identifier: This is a 32-bit bitstring identifying
the particular reference source. In the case of NTP Version 3 or
Version 4 stratum-0 (unspecified) or stratum-1 (primary) servers,
this is a four-character ASCII string, left justified and zero
padded to 32 bits. In NTP Version 3 secondary servers, this is the
32-bit IPv4 address of the reference source. In NTP Version 4
secondary servers, this is the low order 32 bits of the latest
transmit timestamp of the reference source."
::= { agentSntpClient 12 }
agentSntpClientPollInterval OBJECT-TYPE
SYNTAX Unsigned32 (6..10)
UNITS "seconds"
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"The minimum number of seconds between successive SNTP polls
of the server in seconds as a power of two. This
polling interval is used for SNTP requests in
unicast(1) or broadcast(2) administrative mode."
DEFVAL { 6 }
::= { agentSntpClient 13 }
agentSntpClientSourceInterface OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A source-interface selection on an Interface Index (like vlan based
routing interface, port based routing interface, loopback interface,
tunnel interface). A non-zero value indicates ifIndex for the
corresponding interface entry in the ifTable is selected.
A zero value indicates the source-interface un-selection."
::= { agentSntpClient 14 }
-- -------------------------------------------------------------
-- SNTP Client Unicast Group
-- -------------------------------------------------------------
agentSntpClientUnicastPollInterval OBJECT-TYPE
SYNTAX Unsigned32 (6..10)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The minimum number of seconds between successive SNTP polls
of the server in seconds as a power of two. This
polling interval is used for SNTP requests in
unicast(1) administrative mode."
DEFVAL { 6 }
::= { agentSntpClientUnicast 1 }
agentSntpClientUnicastPollTimeout OBJECT-TYPE
SYNTAX Unsigned32 (1..30)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number of seconds to wait for a response from a SNTP
server before considering the attempt to have 'timed out'.
This timeout is used for SNTP requests in unicast(1)
administrative mode."
DEFVAL { 5 }
::= { agentSntpClientUnicast 2 }
agentSntpClientUnicastPollRetry OBJECT-TYPE
SYNTAX Unsigned32 (0..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number of times to retry a request to the same SNTP server
that has 'timed out.'. This retry count is
used for directed SNTP requests in unicast(1) administrative mode.
For example, assume this object has been SET to a value of 2.
When the SNTP client queries a given server it will send 1 SNTP
request frame. If that original attempt fails, the client will
retry up to a maximum of 2 more times before declaring the unicast
poll unsuccessful and attempting the next server."
DEFVAL { 1 }
::= { agentSntpClientUnicast 3 }
agentSntpClientUcastServerMaxEntries OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of server entries that are allowed in the
agentSntpClientUcastServerTable."
::= { agentSntpClientUnicast 4 }
agentSntpClientUcastServerCurrEntries OBJECT-TYPE
SYNTAX Gauge32 (0..3)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current number of server entries in the
agentSntpClientUcastServerTable."
::= { agentSntpClientUnicast 5 }
-- -------------------------------------------------------------
-- SNTP Client Unicast Server Table
-- -------------------------------------------------------------
agentSntpClientUcastServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentSntpClientUcastServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing configuration and statistical
information for unicast SNTP servers. Each server
entry is represented by single conceptual row in this
table."
::= { agentSntpClientUnicast 6 }
agentSntpClientUcastServerEntry OBJECT-TYPE
SYNTAX AgentSntpClientUcastServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information for a particular unicast SNTP server."
INDEX { agentSntpClientUcastServerIndex }
::= { agentSntpClientUcastServerTable 1 }
AgentSntpClientUcastServerEntry ::=
SEQUENCE {
agentSntpClientUcastServerIndex
Unsigned32,
agentSntpClientUcastServerAddressType
InetAddressType,
agentSntpClientUcastServerAddress
InetAddress,
agentSntpClientUcastServerPort
InetPortNumber,
agentSntpClientUcastServerVersion
INTEGER,
agentSntpClientUcastServerPrecedence
Unsigned32,
agentSntpClientUcastServerLastUpdateTime
DateAndTime,
agentSntpClientUcastServerLastAttemptTime
DateAndTime,
agentSntpClientUcastServerLastAttemptStatus
SntpClientUpdateStatus,
agentSntpClientUcastServerNumRequests
Counter32,
agentSntpClientUcastServerNumFailedRequests
Counter32,
agentSntpClientUcastServerRowStatus
RowStatus
}
agentSntpClientUcastServerIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object uniquely identifies the entry in the table."
::= { agentSntpClientUcastServerEntry 1 }
agentSntpClientUcastServerAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies how agentSntpClientUcastServerAddr is
encoded. Support for all possible enumerations defined by
InetAddressType is NOT REQUIRED."
::= { agentSntpClientUcastServerEntry 2 }
agentSntpClientUcastServerAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE(1..64))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The encoded internet address of an SNTP server.
Unicast SNTP requests will be sent to this address. If this
address is a DNS hostname, then that hostname SHOULD be
resolved into an IP address each time a SNTP request is sent
to it."
::= { agentSntpClientUcastServerEntry 3 }
agentSntpClientUcastServerPort OBJECT-TYPE
SYNTAX InetPortNumber (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The port number on the server to which poll requests are sent.
A set request MUST NOT use a value of 0 for this object."
DEFVAL { 123 }
::= { agentSntpClientUcastServerEntry 4 }
agentSntpClientUcastServerVersion OBJECT-TYPE
SYNTAX INTEGER {
version1(1),
version2(2),
version3(3),
version4(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The SNTP version this server supports. This is the value
that will be encoded in NTP polls when operating in unicast(1)
administrative mode."
REFERENCE
"RFC 2030 - Simple Network Time Protocol (SNTP) Version 4
for IPv4, IPv6 and OSI; Section 5."
::= { agentSntpClientUcastServerEntry 5}
agentSntpClientUcastServerPrecedence OBJECT-TYPE
SYNTAX Unsigned32 (1..3)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The precedence that this server has in relation to its peers
in the determining the sequence of servers to which SNTP requests
will be sent. The client continues sending requests to
different servers until a successful response is received or
all servers are exhausted. This object indicates the order in
which to query the servers. A server entry with a precedence
of 1 will be queried before a server with a precedence of 2,
and so forth. If more than one server has the same precedence
then the request order will follow the lexicographical
ordering of the entries in this table."
DEFVAL { 1 }
::= { agentSntpClientUcastServerEntry 6 }
agentSntpClientUcastServerLastUpdateTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The local date and time that the response from this server was
used to update the system time on the device since agent
reboot. If the SNTP client has not updated the time using
a response from this server then this object MUST return
'00000000'H."
DEFVAL { '00000000'H }
::= { agentSntpClientUcastServerEntry 7 }
agentSntpClientUcastServerLastAttemptTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The local date and time that this SNTP server was last queried
since agent reboot. Essentially, this value is a
timestamp for the agentSntpClientUcastServerLastAttemptStatus
object. If this server has not been queried then this object
MUST return '00000000'H."
DEFVAL { '00000000'H }
::= { agentSntpClientUcastServerEntry 8 }
agentSntpClientUcastServerLastAttemptStatus OBJECT-TYPE
SYNTAX SntpClientUpdateStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the last SNTP request to this server since
agent reboot. If no requests have been made then this object
should return 'other'."
DEFVAL { other }
::= { agentSntpClientUcastServerEntry 9 }
agentSntpClientUcastServerNumRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SNTP requests made to this server since
the last agent reboot. This includes retry attempts to
the server."
::= { agentSntpClientUcastServerEntry 10 }
agentSntpClientUcastServerNumFailedRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SNTP requests made to this server that did
not result in a successful response since the last agent
reboot. This includes retry attempts to the server."
::= { agentSntpClientUcastServerEntry 11 }
agentSntpClientUcastServerRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The row status of this conceptual row in the table.
active
- The server is available for use in SNTP client operations.
Other writable leaves in this table MAY be modified while
the row is in the active state.
notInService
- The entry is fully configured but is not available for
use in SNTP client operations. The agent MAY transition
a row from the active to notInService upon
receipt of a kiss of death packet from the server.
createAndGo
- This is the preferred mechanism for creating conceptual
rows in this table. This value can never be read as
the row will always transition immediately to either active
or notInService.
destroy
- This will remove the conceptual row from the table and
make it unavailable for SNTP client operations. "
::= { agentSntpClientUcastServerEntry 12 }
-- -------------------------------------------------------------
-- SNTP Client Broadcast Group
-- -------------------------------------------------------------
agentSntpClientBroadcastCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of unsolicited broadcast SNTP messages that have
been received and processed by the SNTP client. Unsolicited
SNTP broadcast frames will not be counted unless the SNTP
agent is operating in broadcast(3) mode, as specified by
agentSntpClientMode."
::= { agentSntpClientBroadcast 1 }
agentSntpClientBroadcastInterval OBJECT-TYPE
SYNTAX Unsigned32 (6..10)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number of seconds the client will wait before
processing another broadcast packet expressed as a
power of two. Packets received during the wait interval
are silently discarded."
DEFVAL { 6 }
::= { agentSntpClientBroadcast 2}
-- -------------------------------------------------------------
-- Conformance Information
-- -------------------------------------------------------------
agentSntpClientConformance OBJECT IDENTIFIER
::= { agentSntpClientMIB 2 }
agentSntpClientGroups OBJECT IDENTIFIER
::= { agentSntpClientConformance 1 }
agentSntpClientCompliances OBJECT IDENTIFIER
::= { agentSntpClientConformance 2 }
-- -------------------------------------------------------------
-- Units of conformance
-- -------------------------------------------------------------
agentSntpClientDeviceGroup OBJECT-GROUP
OBJECTS {
agentSntpClientVersion,
agentSntpClientSupportedMode,
agentSntpClientMode,
agentSntpClientLastUpdateTime,
agentSntpClientLastAttemptTime,
agentSntpClientLastAttemptStatus,
agentSntpClientServerAddressType,
agentSntpClientServerAddress,
agentSntpClientServerMode,
agentSntpClientServerStratum,
agentSntpClientServerRefClkId
}
STATUS current
DESCRIPTION
"A collection of objects providing device level control of
an SNTP client on NETGEAR enabled devices."
::= { agentSntpClientGroups 1 }
agentSntpClientUnicastGroup OBJECT-GROUP
OBJECTS {
agentSntpClientUnicastPollInterval,
agentSntpClientUnicastPollTimeout,
agentSntpClientUnicastPollRetry,
agentSntpClientUcastServerMaxEntries,
agentSntpClientUcastServerCurrEntries,
agentSntpClientUcastServerAddress,
agentSntpClientUcastServerAddressType,
agentSntpClientUcastServerPrecedence,
agentSntpClientUcastServerLastUpdateTime,
agentSntpClientUcastServerLastAttemptTime,
agentSntpClientUcastServerLastAttemptStatus,
agentSntpClientUcastServerNumRequests,
agentSntpClientUcastServerNumFailedRequests,
agentSntpClientUcastServerRowStatus
}
STATUS current
DESCRIPTION
"A collection of objects providing control and statistics for
an SNTP client capable of operating in unicast mode."
::= { agentSntpClientGroups 2 }
agentSntpClientBroadcastGroup OBJECT-GROUP
OBJECTS {
agentSntpClientBroadcastCount,
agentSntpClientBroadcastInterval
}
STATUS current
DESCRIPTION
"A collection of objects providing control and statistics for
an SNTP client capable of operating in broadcast mode."
::= { agentSntpClientGroups 3 }
-- -------------------------------------------------------------
-- Compliance statements
-- -------------------------------------------------------------
agentSntpClientCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for devices that support
agentSntpClient."
MODULE
MANDATORY-GROUPS { agentSntpClientDeviceGroup }
GROUP agentSntpClientUnicastGroup
DESCRIPTION
"This group is REQUIRED for devices supporting operation
of an SNTP client in unicast mode."
GROUP agentSntpClientBroadcastGroup
DESCRIPTION
"This group is REQUIRED for devices supporting operation
of a SNTP client in broadcast mode."
::= { agentSntpClientCompliances 1 }
END
Reference in New Issue Copy Permalink