mibs/MIBS/quanta/qos_diffserv_extensions.my

1075 lines
38 KiB
Plaintext
Raw Permalink Normal View History

2023-12-05 12:25:34 +01:00
NETGEAR-QOS-DIFFSERV-EXTENSIONS-MIB DEFINITIONS ::= BEGIN
-- Netgear Inc Quality of Service Diffserv Extensions MIB
-- Copyright Netgear Inc (2001-2007) All rights reserved.
-- This SNMP Management Information Specification
-- embodies Netgear Inc's confidential and proprietary
-- intellectual property. Netgear Inc retains all title
-- and ownership in the Specification including any revisions.
-- This Specification is supplied "AS IS", Netgear Inc
-- makes no warranty, either expressed or implied,
-- as to the use, operation, condition, or performance of the
-- Specification.
IMPORTS
IpAddress, Integer32, Unsigned32, MODULE-IDENTITY, OBJECT-TYPE, OBJECT-IDENTITY
FROM SNMPv2-SMI
TEXTUAL-CONVENTION, RowStatus, StorageType, MacAddress
FROM SNMPv2-TC
InterfaceIndex
FROM IF-MIB
InetPortNumber
FROM INET-ADDRESS-MIB
DisplayString
FROM RFC1213-MIB
IndexInteger, IndexIntegerNextFree, IfDirection, diffServMeterEntry
FROM DIFFSERV-MIB
lb6m FROM QUANTA-LB6M-REF-MIB;
fastPathQOSDiffServExtensions MODULE-IDENTITY
LAST-UPDATED "201101260000Z" -- 26 Jan 2011 12:00:00 GMT
ORGANIZATION "Netgear Inc"
CONTACT-INFO ""
DESCRIPTION
""
-- Revision history.
REVISION
"201101260000Z" -- 26 Jan 2011 12:00:00 GMT
DESCRIPTION
"Postal address updated."
REVISION
"200705230000Z" -- 23 May 2007 12:00:00 GMT
DESCRIPTION
"Netgear branding related changes."
REVISION
"200406300000Z" -- 30 Jun 2003 12:00:00 GMT
DESCRIPTION
"DiffServ enhancements for NETGEAR Release 5.0."
REVISION
"200311210000Z" -- 21 Nov 2003 12:00:00 GMT
DESCRIPTION
"Revisions made for new release."
REVISION
"200111010933Z"
DESCRIPTION
"Initial version."
::= { lb6m 6 }
IpPrecedence ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"An IP Precedence value that may be used for marking a traffic stream."
SYNTAX Integer32 (0..7)
Cos ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"The 802.1p header Class of Service field that may be used for
marking a traffic streams. Also known as the Ethernet frame
priority."
SYNTAX Integer32 (0..7)
CosOrAny ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"The 802.1p header Class of Service field that may be used for
discriminating among traffic streams. Also known as the Ethernet
frame priority. The value -1 is used to indicate a wild card
i.e. any value."
SYNTAX Integer32 (-1 | 0..7)
VlanIdOrAny ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"The virtual LAN identifier (VLAN ID) that may be used to
differentiate among traffic streams. The value -1 is
used to indicate a wild card i.e. any value."
SYNTAX Integer32 (-1 | 1..4094)
EtypeOrAny ::= TEXTUAL-CONVENTION
DISPLAY-HINT "x"
STATUS current
DESCRIPTION
"Ethertype value field that may be used to differentiate among traffic
streams. The allowed value is 0x0600 to 0xFFFF, with a value of
0 used to indicate this object is not involved in the classifier
entry."
SYNTAX Unsigned32 (0 | 1536..65535) -- hex value 0x0600 to 0xFFFF
agentDiffServMIBObjects OBJECT IDENTIFIER ::= { fastPathQOSDiffServExtensions 1 }
agentDiffServMIBAdmin OBJECT IDENTIFIER ::= { fastPathQOSDiffServExtensions 2 }
--
-- Classifiers
--
agentDiffServClassifier OBJECT IDENTIFIER ::= { agentDiffServMIBObjects 1 }
--
-- Auxiliary Multi-field Classification Table
--
-- Classification based on different fields in the Layer 2 and IP headers.
-- Functional Data Paths may share definitions by using the same entry.
--
-- NOTE: This table is an alternative to the IP Multi-field Classification
-- Table.
--
agentDiffServAuxMfClfrNextFree OBJECT-TYPE
SYNTAX IndexIntegerNextFree
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains an unused value for
agentDiffServAuxMfClfrId , or a zero to indicate that none exist."
::= { agentDiffServClassifier 1 }
agentDiffServAuxMfClfrTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentDiffServAuxMfClfrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of Auxiliary Multi-field Classifier filter entries that a
system may use to identify IP traffic."
::= { agentDiffServClassifier 2 }
agentDiffServAuxMfClfrEntry OBJECT-TYPE
SYNTAX AgentDiffServAuxMfClfrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An IP Multi-field Classifier entry describes a single filter."
INDEX { agentDiffServAuxMfClfrId }
::= { agentDiffServAuxMfClfrTable 1 }
AgentDiffServAuxMfClfrEntry ::= SEQUENCE {
agentDiffServAuxMfClfrId IndexInteger,
agentDiffServAuxMfClfrDstAddr IpAddress,
agentDiffServAuxMfClfrDstMask IpAddress,
agentDiffServAuxMfClfrSrcAddr IpAddress,
agentDiffServAuxMfClfrSrcMask IpAddress,
agentDiffServAuxMfClfrProtocol Unsigned32,
agentDiffServAuxMfClfrDstL4PortMin InetPortNumber,
agentDiffServAuxMfClfrDstL4PortMax InetPortNumber,
agentDiffServAuxMfClfrSrcL4PortMin InetPortNumber,
agentDiffServAuxMfClfrSrcL4PortMax InetPortNumber,
agentDiffServAuxMfClfrCos CosOrAny,
agentDiffServAuxMfClfrTos OCTET STRING,
agentDiffServAuxMfClfrTosMask OCTET STRING,
agentDiffServAuxMfClfrDstMac MacAddress,
agentDiffServAuxMfClfrDstMacMask MacAddress,
agentDiffServAuxMfClfrSrcMac MacAddress,
agentDiffServAuxMfClfrSrcMacMask MacAddress,
agentDiffServAuxMfClfrVlanId VlanIdOrAny,
agentDiffServAuxMfClfrStorage StorageType,
agentDiffServAuxMfClfrStatus RowStatus,
agentDiffServAuxMfClfrCos2 CosOrAny,
agentDiffServAuxMfClfrEtypeVal1 EtypeOrAny,
agentDiffServAuxMfClfrEtypeVal2 EtypeOrAny,
agentDiffServAuxMfClfrVlanIdMin Unsigned32,
agentDiffServAuxMfClfrVlanIdMax Unsigned32,
agentDiffServAuxMfClfrVlanId2Min Unsigned32,
agentDiffServAuxMfClfrVlanId2Max Unsigned32
}
agentDiffServAuxMfClfrId OBJECT-TYPE
SYNTAX IndexInteger
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index that enumerates the Auxiliary MultiField Classifier filter
entries. Managers obtain new values for row creation in this
table by reading agentDiffServAuxMfClfrNextFree."
::= { agentDiffServAuxMfClfrEntry 1 }
agentDiffServAuxMfClfrDstAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IP address to match against the packet's destination IP
address."
::= { agentDiffServAuxMfClfrEntry 2 }
agentDiffServAuxMfClfrDstMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This mask value identifies the portion of agentDiffServAuxMfClfrDstAddr
that is compared against a packet.
A non-contiguous mask value is permitted. A mask of 0 indicates a match
of any address."
DEFVAL { '00000000'h }
::= { agentDiffServAuxMfClfrEntry 3 }
agentDiffServAuxMfClfrSrcAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IP address to match against the packet's source IP
address."
::= { agentDiffServAuxMfClfrEntry 4 }
agentDiffServAuxMfClfrSrcMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This mask value identifies the portion of agentDiffServAuxMfClfrSrcAddr
that is compared against a packet.
A non-contiguous mask value is permitted. A mask of 0 indicates a match
of any address."
DEFVAL { '00000000'h }
::= { agentDiffServAuxMfClfrEntry 5 }
agentDiffServAuxMfClfrProtocol OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IP protocol to match against the IPv4 protocol number. A value of 255 means
match all. "
DEFVAL { 255 }
::= { agentDiffServAuxMfClfrEntry 6 }
agentDiffServAuxMfClfrDstL4PortMin OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The minimum value that the layer-4 destination port number in the packet must have
in order to match this classifier entry. "
DEFVAL { 0 }
::= { agentDiffServAuxMfClfrEntry 7 }
agentDiffServAuxMfClfrDstL4PortMax OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The maximum value that the layer-4 destination port number in the
packet must have in order to match this classifier entry.
This value must be equal to or greater than the value specified
for this entry in agentDiffServAuxMfClfrDstL4PortMin. "
DEFVAL { 65535 }
::= { agentDiffServAuxMfClfrEntry 8 }
agentDiffServAuxMfClfrSrcL4PortMin OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The minimum value that the layer-4 source port number in the
packet must have in order to match this classifier entry. "
DEFVAL { 0 }
::= { agentDiffServAuxMfClfrEntry 9 }
agentDiffServAuxMfClfrSrcL4PortMax OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The maximum value that the layer-4 source port number in the
packet must have in order to match this classifier entry. This
value must be equal to or greater than the value specified for
this entry in diffServMultiFieldClfrSrcL4PortMin. "
DEFVAL { 65535 }
::= { agentDiffServAuxMfClfrEntry 10 }
agentDiffServAuxMfClfrCos OBJECT-TYPE
SYNTAX CosOrAny
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Three-bit user priority field in the 802.1Q tag header of a tagged
Ethernet frame used as a class-match parameter. For frames
containing a double VLAN tag, this field is located in the first/outer
tag. A value of -1 indicates that a specific COS value has not been
defined and thus all COS values are considered a match."
DEFVAL { -1 }
::= { agentDiffServAuxMfClfrEntry 11 }
agentDiffServAuxMfClfrTos OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"IP TOS bits value, defined as all eight bits of the Service
Type octet in the IPv4 header. There are multiple, overlapping,
meanings of the TOS octet in use today:
Precedence (bits 7-5): IP Precedence, values 0-7
DSCP (bits 7-2): IP DiffServ Code Point, values 0-63
TOS (bits 7-0): IP Type of Service, by bits, values 0-255
Each of these definitions can be produced using the appropriate
agentDiffServAuxMfClfrTosMask mask value. These definitions are
mutually-exclusive, so only one is allowed for any given classifier
element."
::= { agentDiffServAuxMfClfrEntry 12 }
agentDiffServAuxMfClfrTosMask OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"IP TOS bits mask value. It identifies the portion of
agentDiffServAuxMfClfrTos that is compared against a packet.
A non-contiguous mask value is permitted. A mask of 0 indicates a match
of any TOS value.
There are multiple, overlapping meanings of the TOS octet in use today.
These are represented by the following specific mask values:
Precedence (bits 7-5): 224 (bit mask '11100000')
DSCP (bits 7-2): 252 (bit mask '11111100')
TOS (bits 7-0): 255 (bit mask '11111111')
Other mask values are also permitted."
::= { agentDiffServAuxMfClfrEntry 13 }
agentDiffServAuxMfClfrDstMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Destination MAC address. "
::= { agentDiffServAuxMfClfrEntry 14 }
agentDiffServAuxMfClfrDstMacMask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Destination MAC address mask value. This mask value
identifies the portion of agentDiffServAuxMfClfrDstMac
that is compared against a packet.
A non-contiguous mask value is permitted. A mask of 0 indicates a match
of any MAC address."
::= { agentDiffServAuxMfClfrEntry 15 }
agentDiffServAuxMfClfrSrcMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Source MAC address. "
::= { agentDiffServAuxMfClfrEntry 16 }
agentDiffServAuxMfClfrSrcMacMask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Source MAC address mask value. This mask value
identifies the portion of agentDiffServAuxMfClfrSrcMac
that is compared against a packet.
A non-contiguous mask value is permitted. A mask of 0 indicates a match
of any MAC address."
::= { agentDiffServAuxMfClfrEntry 17 }
agentDiffServAuxMfClfrVlanId OBJECT-TYPE
SYNTAX VlanIdOrAny
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"VLAN ID value for the classifier. A value of -1 indicates that
a specific VLAN ID value has not been defined and thus all
VLAN ID values are considered a match."
DEFVAL { -1 }
::= { agentDiffServAuxMfClfrEntry 18 }
agentDiffServAuxMfClfrStorage OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage type for this conceptual row. "
DEFVAL { nonVolatile }
::= { agentDiffServAuxMfClfrEntry 19 }
agentDiffServAuxMfClfrStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row."
::= { agentDiffServAuxMfClfrEntry 20 }
agentDiffServAuxMfClfrCos2 OBJECT-TYPE
SYNTAX CosOrAny
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Three-bit user priority field in the second/inner 802.1Q tag header of a
double VLAN tagged Ethernet frame used as a class-match parameter
A value of -1 indicates that a specific Secondary COS value has not been
defined and thus all Secondary COS values are considered a match."
DEFVAL { -1 }
::= { agentDiffServAuxMfClfrEntry 21 }
agentDiffServAuxMfClfrEtypeVal1 OBJECT-TYPE
SYNTAX EtypeOrAny
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Ethertype value to be compared in order to match this classifier entry.
The allowed value for this object is 0x0600 to 0xFFFF, with a value of
0 used to indicate this object is not involved in the classifier entry."
DEFVAL { 0 }
::= { agentDiffServAuxMfClfrEntry 22 }
agentDiffServAuxMfClfrEtypeVal2 OBJECT-TYPE
SYNTAX EtypeOrAny
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A second Ethertype value to be compared in order to match
this classifier entry. This value is considered in addition
to the value specified by agentDiffServAuxMfClfrEtypeVal1 and serves
as a second possible match value (i.e. a packet can match either
EtypeVal1 or EtypeVal2). The allowed value for this object is
0x0600 to 0xFFFF, with a value of 0 used to indicate this object is
not involved in the classifier entry."
DEFVAL { 0 }
::= { agentDiffServAuxMfClfrEntry 23 }
agentDiffServAuxMfClfrVlanIdMin OBJECT-TYPE
SYNTAX Unsigned32 (1..4094)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The minimum value that the VLAN ID in the packet must have
in order to match this classifier entry. This field is defined
as the 12-bit VLAN identifier in the 802.1Q tag header of a
tagged Ethernet frame. For a double VLAN tagged frame, this
field is contained in the first/outer tag."
DEFVAL { 1 }
::= { agentDiffServAuxMfClfrEntry 24 }
agentDiffServAuxMfClfrVlanIdMax OBJECT-TYPE
SYNTAX Unsigned32 (1..4094)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The maximum value that the VLAN ID in the packet must have
in order to match this classifier entry. This field is defined
as the 12-bit VLAN identifier in the 802.1Q tag header of a
tagged Ethernet frame. For a double VLAN tagged frame, this
field is contained in the first/outer tag. This value must be
equal to or greater than the value specified for the entry in
agentDiffServAuxMfClfrVlanIdMin."
DEFVAL { 4094 }
::= { agentDiffServAuxMfClfrEntry 25 }
agentDiffServAuxMfClfrVlanId2Min OBJECT-TYPE
SYNTAX Unsigned32 (1..4094)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The minimum value that the Secondary VLAN ID in the packet must have
in order to match this classifier entry. This field is defined
as the 12-bit VLAN identifier in the second/inner 802.1Q tag header
of a double VLAN tagged Ethernet frame."
DEFVAL { 1 }
::= { agentDiffServAuxMfClfrEntry 26 }
agentDiffServAuxMfClfrVlanId2Max OBJECT-TYPE
SYNTAX Unsigned32 (1..4094)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The maximum value that the Secondary VLAN ID in the packet must have
in order to match this classifier entry. This field is defined
as the 12-bit VLAN identifier in the second/inner 802.1Q tag header
of a double VLAN tagged Ethernet frame. This value must be equal to or
greater than the value specified for the entry in
agentDiffServAuxMfClfrVlanId2Min."
DEFVAL { 4094 }
::= { agentDiffServAuxMfClfrEntry 27 }
--
-- Actions
--
agentDiffServAction OBJECT IDENTIFIER ::= { agentDiffServMIBObjects 2 }
--
-- IP Precedence Mark Action Table
--
-- Rows of this table are pointed to by diffServActionSpecific to
-- provide detailed parameters specific to the IP Precedence Mark action.
--
-- A single entry in this table can be shared by multiple
-- diffServActionTable entries.
--
-- NOTE: This table is referenced instead of the DSCP Mark Action Table
-- when marking the IP Precedence of a packet rather than its DSCP.
--
agentDiffServIpPrecMarkActTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentDiffServIpPrecMarkActEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table enumerates specific IP Precedence values used for marking
or remarking the Precedence field of IP packets. The entries of this
table may be referenced by a diffServActionSpecific attribute."
::= { agentDiffServAction 4 }
agentDiffServIpPrecMarkActEntry OBJECT-TYPE
SYNTAX AgentDiffServIpPrecMarkActEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the IP Precedence mark action table that describes a
single IP Precedence value used for marking."
INDEX { agentDiffServIpPrecMarkActPrecedence }
::= { agentDiffServIpPrecMarkActTable 1 }
AgentDiffServIpPrecMarkActEntry ::= SEQUENCE {
agentDiffServIpPrecMarkActPrecedence IpPrecedence
}
agentDiffServIpPrecMarkActPrecedence OBJECT-TYPE
SYNTAX IpPrecedence
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP Precedence that this Action will store into the Precedence
field of the IP packet. It is quite possible that the only packets
subject to this Action are already marked with this IP Precedence.
Note also that Differentiated Services processing may result in a
packet being marked on both ingress to a network and on egress from
it, and that ingress and egress can occur in the same router."
::= { agentDiffServIpPrecMarkActEntry 1 }
--
-- COS Mark Action Table
--
-- Rows of this table are pointed to by diffServActionSpecific to
-- provide detailed parameters specific to the COS Mark action.
--
-- A single entry in this table can be shared by multiple
-- diffServActionTable entries.
--
-- NOTE: This table is referenced when marking the Class of Service
-- priority bits as defined in the 802.1Q tag header of a
-- tagged Ethernet frame. For frames containing a double VLAN
-- tag, this field is located in the first/outer tag.
--
agentDiffServCosMarkActTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentDiffServCosMarkActEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table enumerates specific Class of Service values used for marking
or remarking the priority bits in the 802.1p header. The entries of this
table may be referenced by a diffServActionSpecific attribute."
::= { agentDiffServAction 2 }
agentDiffServCosMarkActEntry OBJECT-TYPE
SYNTAX AgentDiffServCosMarkActEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the COS mark action table that describes a
single Class of Service value used for marking."
INDEX { agentDiffServCosMarkActCos }
::= { agentDiffServCosMarkActTable 1 }
AgentDiffServCosMarkActEntry ::= SEQUENCE {
agentDiffServCosMarkActCos Cos
}
agentDiffServCosMarkActCos OBJECT-TYPE
SYNTAX Cos
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Class of Service value that this Action will store into the
priority bits of the 802.1p header. It is quite possible that the
only packets subject to this Action are already marked with this COS
value."
::= { agentDiffServCosMarkActEntry 1 }
--
-- Secondary COS (COS2) Mark Action Table
--
-- Rows of this table are pointed to by diffServActionSpecific to
-- provide detailed parameters specific to the Secondary COS Mark action.
--
-- A single entry in this table can be shared by multiple
-- diffServActionTable entries.
--
-- NOTE: This table is referenced when marking the Secondary Class of Service
-- priority bits as defined in the second/inner 802.1Q tag header of a
-- double VLAN tagged Ethernet packet.
--
agentDiffServCos2MarkActTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentDiffServCos2MarkActEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table enumerates specific Secondary Class of Service values used for marking
or remarking the priority bits in the second/inner 802.1Q tag header of a double VLAN
tagged Ethernet packet. The entries of this table may be referenced by
a diffServActionSpecific attribute."
::= { agentDiffServAction 5 }
agentDiffServCos2MarkActEntry OBJECT-TYPE
SYNTAX AgentDiffServCos2MarkActEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the Secondary COS mark action table that describes a
single Class of Service value used for marking."
INDEX { agentDiffServCos2MarkActCos }
::= { agentDiffServCos2MarkActTable 1 }
AgentDiffServCos2MarkActEntry ::= SEQUENCE {
agentDiffServCos2MarkActCos Cos
}
agentDiffServCos2MarkActCos OBJECT-TYPE
SYNTAX Cos
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Secondary Class of Service value that this Action will store into the
priority bits of the second/inner 802.1p tag header. It is quite possible
that the only packets subject to this Action are already marked with this
COS value."
::= { agentDiffServCos2MarkActEntry 1 }
--
-- Assign Queue Table
--
-- Rows of this table are pointed to by diffServActionSpecific to
-- provide detailed parameters specific to the Assign Queue action.
--
agentDiffServAssignQueueNextFree OBJECT-TYPE
SYNTAX IndexIntegerNextFree
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains an unused value for agentDiffServAssignIndex, or a
zero to indicate that none exist."
::= { agentDiffServAction 6 }
agentDiffServAssignQueueTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentDiffServAssignQueueEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table used for assigning a stream of Differentiated Services
traffic to a specific quality of service (QoS) queue.
The traffic stream is identified by the upstream Functional
Data Path Element(s), i.e. by the object(s) that point
to each entry in this table. This may include all traffic on an
interface or just a portion thereof."
::= { agentDiffServAction 7 }
agentDiffServAssignQueueEntry OBJECT-TYPE
SYNTAX AgentDiffServAssignQueueEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the assign queue table describes a specific (egress)
QoS queue identifier for a traffic stream."
INDEX { agentDiffServAssignQueueIndex }
::= { agentDiffServAssignQueueTable 1 }
AgentDiffServAssignQueueEntry ::= SEQUENCE {
agentDiffServAssignQueueIndex IndexInteger,
agentDiffServAssignQueueQnum Unsigned32,
agentDiffServAssignQueueStorage StorageType,
agentDiffServAssignQueueStatus RowStatus
}
agentDiffServAssignQueueIndex OBJECT-TYPE
SYNTAX IndexInteger
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index that enumerates the Assign Queue entries. Managers obtain
new values for row creation in this table by reading
agentDiffServAssignQueueNextFree."
::= { agentDiffServAssignQueueEntry 1 }
agentDiffServAssignQueueQnum OBJECT-TYPE
SYNTAX Unsigned32 (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The queue identifier value. This value indicates the QoS queue
number to which the traffic stream for this data path is directed
for egress from the device."
::= { agentDiffServAssignQueueEntry 2 }
agentDiffServAssignQueueStorage OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage type for this conceptual row. Conceptual rows
having the value 'permanent' need not allow write-access to any
columnar objects in the row."
DEFVAL { nonVolatile }
::= { agentDiffServAssignQueueEntry 3 }
agentDiffServAssignQueueStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row. All writable objects in this
row may be modified at any time. Setting this variable to
'destroy' when the MIB contains one or more RowPointers pointing
to it results in destruction being delayed until the row is no
longer used."
::= { agentDiffServAssignQueueEntry 4 }
--
-- Redirect Table
--
-- Rows of this table are pointed to by diffServActionSpecific to
-- provide detailed parameters specific to the Redirect action.
--
agentDiffServRedirectNextFree OBJECT-TYPE
SYNTAX IndexIntegerNextFree
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains an unused value for agentDiffServRedirectId, or a
zero to indicate that none exist."
::= { agentDiffServAction 8 }
agentDiffServRedirectTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentDiffServRedirectEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table used for redirecting a stream of Differentiated Services
traffic to a specific egress interface, bypassing any normal
device forwarding decision. The traffic stream is identified by
the upstream Functional Data Path Element(s), i.e. by the object(s)
that point to each entry in this table. This may include all traffic
on an interface or just a portion thereof."
::= { agentDiffServAction 9 }
agentDiffServRedirectEntry OBJECT-TYPE
SYNTAX AgentDiffServRedirectEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the redirect table describes a specific external
interface number used as the egress point of a traffic stream."
INDEX { agentDiffServRedirectId }
::= { agentDiffServRedirectTable 1 }
AgentDiffServRedirectEntry ::= SEQUENCE {
agentDiffServRedirectId IndexInteger,
agentDiffServRedirectIntf InterfaceIndex,
agentDiffServRedirectStorage StorageType,
agentDiffServRedirectStatus RowStatus
}
agentDiffServRedirectId OBJECT-TYPE
SYNTAX IndexInteger
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index that enumerates the Redirect entries. Managers obtain new
values for row creation in this table by reading
agentDiffServRedirectNextFree."
::= { agentDiffServRedirectEntry 1 }
agentDiffServRedirectIntf OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The external interface number identifier value. This value indicates
the egress interface to which the traffic stream for this data path
is directed. Normal traffic forwarding decisions are bypassed."
::= { agentDiffServRedirectEntry 2 }
agentDiffServRedirectStorage OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage type for this conceptual row. Conceptual rows
having the value 'permanent' need not allow write-access to any
columnar objects in the row."
DEFVAL { nonVolatile }
::= { agentDiffServRedirectEntry 3 }
agentDiffServRedirectStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row. All writable objects in this
row may be modified at any time. Setting this variable to
'destroy' when the MIB contains one or more RowPointers pointing
to it results in destruction being delayed until the row is no
longer used."
::= { agentDiffServRedirectEntry 4 }
--
-- Mirror Table
--
-- Rows of this table are pointed to by diffServActionSpecific to
-- provide detailed parameters specific to the Mirror action.
--
agentDiffServMirrorNextFree OBJECT-TYPE
SYNTAX IndexIntegerNextFree
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains an unused value for agentDiffServMirrorId, or a
zero to indicate that none exist."
::= { agentDiffServAction 10 }
agentDiffServMirrorTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentDiffServMirrorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table used for mirroring a stream of Differentiated Services
traffic to a specific egress interface, in addition to any normal
device forwarding decision. The traffic stream is identified by
the upstream Functional Data Path Element(s), i.e. by the object(s)
that point to each entry in this table. This may include all traffic
on an interface or just a portion thereof."
::= { agentDiffServAction 11 }
agentDiffServMirrorEntry OBJECT-TYPE
SYNTAX AgentDiffServMirrorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the mirror table describes a specific external
interface number used as the egress point of a copied traffic
stream."
INDEX { agentDiffServMirrorId }
::= { agentDiffServMirrorTable 1 }
AgentDiffServMirrorEntry ::= SEQUENCE {
agentDiffServMirrorId IndexInteger,
agentDiffServMirrorIntf InterfaceIndex,
agentDiffServMirrorStorage StorageType,
agentDiffServMirrorStatus RowStatus
}
agentDiffServMirrorId OBJECT-TYPE
SYNTAX IndexInteger
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index that enumerates the Mirror entries. Managers obtain new
values for row creation in this table by reading
agentDiffServMirrorNextFree."
::= { agentDiffServMirrorEntry 1 }
agentDiffServMirrorIntf OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The external interface number identifier value. This value indicates
the egress interface to which the traffic stream for this data path
is copied. Normal traffic forwarding decisions are still performed
on the traffic stream."
::= { agentDiffServMirrorEntry 2 }
agentDiffServMirrorStorage OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage type for this conceptual row. Conceptual rows
having the value 'permanent' need not allow write-access to any
columnar objects in the row."
DEFVAL { nonVolatile }
::= { agentDiffServMirrorEntry 3 }
agentDiffServMirrorStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row. All writable objects in this
row may be modified at any time. Setting this variable to
'destroy' when the MIB contains one or more RowPointers pointing
to it results in destruction being delayed until the row is no
longer used."
::= { agentDiffServMirrorEntry 4 }
--
-- Meter
--
agentDiffServMeter OBJECT IDENTIFIER ::= { agentDiffServMIBObjects 3 }
--
-- Color Aware Table
--
-- Augments the diffServMeterTable to provide additional information regarding
-- the policing color mode and its associated color-aware parameters. Each
-- row in this table is indexed using a meter Id corresponding to its
-- associated Meter Table row plus a local table row index.
--
agentDiffServColorAwareTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentDiffServColorAwareEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table used for augmenting the Differentiated Services
meter information with information describing the packet coloration
characteristics for a color-aware mode of policing. The
diffServMeterId is used as the index to this table,
which logically extends the Meter table row with the columnar
objects defined in this Color Aware table row."
::= { agentDiffServMeter 1 }
agentDiffServColorAwareEntry OBJECT-TYPE
SYNTAX AgentDiffServColorAwareEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the color aware table describes a single color conformance
level of a meter."
AUGMENTS { diffServMeterEntry }
::= { agentDiffServColorAwareTable 1 }
AgentDiffServColorAwareEntry ::= SEQUENCE {
agentDiffServColorAwareLevel INTEGER,
agentDiffServColorAwareMode INTEGER,
agentDiffServColorAwareValue Unsigned32
}
agentDiffServColorAwareLevel OBJECT-TYPE
SYNTAX INTEGER {
conform(1),
exceed(2),
unused(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The metering conformance level of this table entry. A policing meter
represents either a conforming or an exceeding level of traffic
in the traffic stream for this data path. The color characteristics
used by the meter are relevant to this conformance level. This
object is set to unused(3) when the meter is not being used for
policing."
DEFVAL { unused }
::= { agentDiffServColorAwareEntry 1 }
agentDiffServColorAwareMode OBJECT-TYPE
SYNTAX INTEGER {
blind(1),
awarecos(2),
awarecos2(3),
awareipdscp(4),
awareipprec(5),
awareunused(6)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The color mode indicator for the meter. When set to blind(1),
metering is performed in a color-blind manner such that any
packet markings are ignored by the meter. The other values
listed for this object indicate the packet field used for determining
its pre-existing color marking. In color-aware mode, the
current color of a packet (e.g. green, yellow, red) influences
the metering outcome. The object value awareunused(6) is
special in that it denotes that the specific field attributes
are not specified for the meter even though a color aware scheme
is in use for policing. This object always returns blind(1) when the
agentDiffServColorAwareLevel is set to unused(3)."
DEFVAL { blind }
::= { agentDiffServColorAwareEntry 2 }
agentDiffServColorAwareValue OBJECT-TYPE
SYNTAX Unsigned32 (0..63)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the color aware table entry. This value is used
to compare the field indicated in agentDiffServColorAwareMode against
packets in a traffic stream along the data path supplying the meter
for a given conformance level. This object always returns 0 when the
agentDiffServColorAwareMode is set to blind(1) or awareunused(6)."
DEFVAL { 0 }
::= { agentDiffServColorAwareEntry 3 }
--
-- OIDs for diffServTBParamType standard MIB definitions: additional values
--
agentDiffServTBMeters OBJECT IDENTIFIER ::= { agentDiffServMIBAdmin 1 }
agentDiffServTBParamSimpleTokenBucketAware OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Two Parameter Token Bucket Meter as described in the Informal
Differentiated Services Model section 5.2.3, but using a
color-aware mode of operation."
::= { agentDiffServTBMeters 1 }
END