david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
main
mibs/MIBS/radlan/RADLAN-IPv6

1950 lines
66 KiB
Plaintext
Raw Permalink Normal View History

Initial commit
2023-12-05 12:25:34 +01:00
RADLAN-IPv6 DEFINITIONS ::= BEGIN
-- Title: RADLAN IPv6 Private Extension
-- Version: 7.60.00.00
-- Date: 25 Sep 2011
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE,
Integer32, Counter32, IpAddress,
mib-2, Unsigned32, Counter64,
zeroDotZero, Gauge32 FROM SNMPv2-SMI
TimeInterval, TruthValue, DisplayString, RowStatus
FROM SNMPv2-TC
rnd FROM RADLAN-MIB
ipSpec FROM RADLAN-IP
ipAddressEntry, ipv6InterfaceEntry FROM IP-MIB
ipNetToPhysicalEntry FROM IP-MIB
inetCidrRouteEntry FROM IP-FORWARD-MIB
InterfaceIndex, InterfaceIndexOrZero
FROM IF-MIB
InetAddressPrefixLength, InetAddressType, InetAddress,
InetAutonomousSystemNumber
FROM INET-ADDRESS-MIB
ipv6RouterAdvertEntry FROM IP-MIB
IANAipRouteProtocol FROM IANA-RTPROTO-MIB
IANAtunnelType FROM IANAifType-MIB;
rlIPv6 MODULE-IDENTITY
LAST-UPDATED "200809250000Z"
ORGANIZATION "Marvell Semiconductor, Inc."
CONTACT-INFO
"www.marvell.com"
DESCRIPTION
"The private MIB module definition for IPv6 MIB."
REVISION "200809250000Z"
DESCRIPTION
"Initial version of this MIB."
::= { rnd 129 }
--- IpAddressTable augmentation
rlIpAddressTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlIpAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is parallel to ipAddressTable, and is used to
add/delete IPv6 entries to/from that table. It contains
private objects."
::= { ipSpec 19 }
rlIpAddressEntry OBJECT-TYPE
SYNTAX RlIpAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An address mapping for a particular interface."
AUGMENTS { ipAddressEntry }
::= { rlIpAddressTable 1 }
RlIpAddressEntry ::= SEQUENCE {
rlIpAddressPrefixLength InetAddressPrefixLength,
rlIpAddressType INTEGER
}
rlIpAddressPrefixLength OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The prefix length of this address."
DEFVAL { 64 }
::= { rlIpAddressEntry 1 }
rlIpAddressType OBJECT-TYPE
SYNTAX INTEGER {
unicast(1),
anycast(2),
broadcast(3),
multicast(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Extend standard field ipAddressType to multicast"
DEFVAL { unicast }
::= { rlIpAddressEntry 2 }
--- ipv6InterfaceTable augmentation
rlipv6InterfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF Rlipv6InterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is parallel to ipv6InterfaceTable, and is used to
configure additional interface parameters."
::= { ipSpec 20 }
rlipv6InterfaceEntry OBJECT-TYPE
SYNTAX Rlipv6InterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Additional configuration parameters for a particular interface."
AUGMENTS { ipv6InterfaceEntry }
::= { rlipv6InterfaceTable 1 }
Rlipv6InterfaceEntry ::= SEQUENCE {
rlipv6InterfaceNdDadAttemps INTEGER,
rlipv6InterfaceAutoconfigEnable INTEGER,
rlipv6InterfaceIcmpUnreachSendEnable INTEGER,
rlipv6InterfaceLinkMTU Unsigned32,
rlipv6InterfaceMLDVersion Unsigned32,
rlipv6InterfaceRetransmitTime Unsigned32,
rlipv6InterfaceIcmpRedirectSendEnable INTEGER
}
rlipv6InterfaceNdDadAttemps OBJECT-TYPE
SYNTAX INTEGER (0..600)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"ND Duplicated address detection number of attempts."
DEFVAL { 0 }
::= { rlipv6InterfaceEntry 1 }
rlipv6InterfaceAutoconfigEnable OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enables or disables Stateless Address Auto configuration
on specific interface."
DEFVAL { enable }
::= { rlipv6InterfaceEntry 2 }
rlipv6InterfaceIcmpUnreachSendEnable OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enables or disables sending of ICMP Destination Unreachable
Error on specific interface."
DEFVAL { enable }
::= { rlipv6InterfaceEntry 3 }
rlipv6InterfaceLinkMTU OBJECT-TYPE
SYNTAX Unsigned32 (1280..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The maximum transmission unit (MTU) size of IPv6 packets
sent on an interface in bytes."
DEFVAL { 1500 }
::= { rlipv6InterfaceEntry 4 }
rlipv6InterfaceMLDVersion OBJECT-TYPE
SYNTAX Unsigned32 (1..2)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Set version of MLD protocol on specific interface."
DEFVAL { 2 }
::= { rlipv6InterfaceEntry 5 }
rlipv6InterfaceRetransmitTime OBJECT-TYPE
SYNTAX Unsigned32 (0 | 1000..3600000)
UNITS "milliseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This value will be included in all IPv6 router advertisements sent
out this interface. Very short intervals are not recommended in
normal IPv6 operation. When a nondefault value is configured, the
configured time is both advertised and used by the router itself.
When value 0 is configured, 0 seconds (unspecified) advertised in
router advertisements and the value 1000 milliseconds is used for
the neighbor discovery activity of the router itself."
DEFVAL { 0 }
::= { rlipv6InterfaceEntry 6 }
rlipv6InterfaceIcmpRedirectSendEnable OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enables or disables sending of ICMP IPv6 redirect messages to
re-send a packet through the same interface on which the packet was
received."
DEFVAL { enable }
::= { rlipv6InterfaceEntry 7 }
--- inetCidrRoutetable augmentation
rlinetCidrRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlinetCidrRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is parallel to inetCidrRouteTable, and is used to
configure or display additional route parameters."
::= { ipSpec 21 }
rlinetCidrRouteEntry OBJECT-TYPE
SYNTAX RlinetCidrRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Additional parameters for a particular route."
AUGMENTS { inetCidrRouteEntry }
::= { rlinetCidrRouteTable 1 }
RlinetCidrRouteEntry ::= SEQUENCE {
rlinetCidrRouteLifetime Unsigned32,
rlinetCidrRouteInfo INTEGER
}
rlinetCidrRouteLifetime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The remaining length of time, in seconds, that this route
will continue to be valid, i.e., time until deprecation.
A value of 4,294,967,295 represents infinity."
DEFVAL { 4294967295 }
::= { rlinetCidrRouteEntry 1 }
rlinetCidrRouteInfo OBJECT-TYPE
SYNTAX INTEGER {
none(0),
ospfIntraArea(1),
ospfInterArea(2),
ospfExternalType1(3),
ospfExternalType2(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A reference to MIB definitions specific to the particular routing
protocol which is responsible for this route, as determined by the
value specified in the route's inetCidrRouteProto value."
DEFVAL { none }
::= { rlinetCidrRouteEntry 2 }
--- ipNetToPhysicalTable augmentation
rlipNetToPhysicalTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlipNetToPhysicalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is parallel to ipNetToPhysicalTable, and is used to
configure or display additional neighbor parameters."
::= { ipSpec 22 }
rlipNetToPhysicalEntry OBJECT-TYPE
SYNTAX RlipNetToPhysicalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Additional parameters for a neighbor"
AUGMENTS { ipNetToPhysicalEntry }
::= { rlipNetToPhysicalTable 1 }
RlipNetToPhysicalEntry ::= SEQUENCE {
rlipNetToPhysicalIsRouter TruthValue,
rlipNetToPhysicalReachableConfirmed Unsigned32
}
rlipNetToPhysicalIsRouter OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object has the value 'true(1)', if the neighbor
is router; otherwise, the value is 'false(2)'."
::= { rlipNetToPhysicalEntry 1 }
rlipNetToPhysicalReachableConfirmed OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time (in seconds) since the address was confirmed to be reachable.
Only, relevant for dynamic entries."
::= { rlipNetToPhysicalEntry 2 }
--- ICMPv6 Rate Limiting
rlipv6IcmpErrorRatelimitInterval OBJECT-TYPE
SYNTAX TimeInterval
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The time interval between tokens being placed in the bucket,
each token represents a single ICMP error message.
The interval measured in milliseconds."
DEFVAL { 100 }
::= { rlIPv6 1 }
rlipv6IcmpErrorRatelimitBucketSize OBJECT-TYPE
SYNTAX INTEGER(1..200)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum number of tokens stored in the bucket,
each token represents a single ICMP error message."
DEFVAL { 10 }
::= { rlIPv6 2 }
--- IPv6 Link Local Default Zone
rlipv6LLDefaultZone OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The interface which would be used as the egress interface
for packets sent without a specified IPv6Z interface identifier
or with the default '0' identifier. Zero value means no default
interface specified."
DEFVAL { 0 }
::= { rlIPv6 3 }
--- rlIpv6GeneralPrefixTable
rlIpv6GeneralPrefixTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlIpv6GeneralPrefixEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table defines general prefix description,
based on which a number of longer, more specific, prefixes can
be defined."
::= { rlIPv6 4 }
rlIpv6GeneralPrefixEntry OBJECT-TYPE
SYNTAX RlIpv6GeneralPrefixEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Single entry in general prefix table."
INDEX {rlIpv6GeneralPrefixName}
::= { rlIpv6GeneralPrefixTable 1 }
RlIpv6GeneralPrefixEntry ::= SEQUENCE {
rlIpv6GeneralPrefixName DisplayString,
rlIpv6GeneralPrefixInetAddrType InetAddressType,
rlIpv6GeneralPrefixInetAddr InetAddress,
rlIpv6GeneralPrefixInetAddrPrefixLength InetAddressPrefixLength,
rlIpv6GeneralPrefixInterfaceId Unsigned32,
rlIpv6GeneralPrefixRowStatus RowStatus
}
rlIpv6GeneralPrefixName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The name assigned to the prefix."
::= { rlIpv6GeneralPrefixEntry 1 }
rlIpv6GeneralPrefixInetAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Prefix inet address type. Has to be IPv6."
::= { rlIpv6GeneralPrefixEntry 2 }
rlIpv6GeneralPrefixInetAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IPv6 network assigned to the general prefix.
This argument must be in the form documented in RFC4293
where the address is specified in hexadecimal using 16-bit values
between colons."
::= { rlIpv6GeneralPrefixEntry 3 }
rlIpv6GeneralPrefixInetAddrPrefixLength OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the number of leading one bits that form the
mask to be logical-ANDed with the inet address
before being compared to the value in the
rlIpv6GeneralPrefixInetAddr field."
::= { rlIpv6GeneralPrefixEntry 4 }
rlIpv6GeneralPrefixInterfaceId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Interface id to use when creating prefix based on point-to-point interface."
::= { rlIpv6GeneralPrefixEntry 5 }
rlIpv6GeneralPrefixRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Row status."
::= { rlIpv6GeneralPrefixEntry 6 }
--- IPv6 maximum number of hops
rlipv6MaximumHopsNumber OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Maximum number of hops used in router advertisements and all IPv6 packets that
are originated by the router."
DEFVAL { 64 }
::= { rlIPv6 5 }
--- rlIpv6RouterAdvertPrefixTable
rlIpv6RouterAdvertPrefixTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlIpv6RouterAdvertPrefixEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table defines IPv6 prefixes which are included in IPv6 Neighbor
Discovery (ND) router advertisements."
::= { rlIPv6 6 }
rlIpv6RouterAdvertPrefixEntry OBJECT-TYPE
SYNTAX RlIpv6RouterAdvertPrefixEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Single entry in Neighbor Discovery Prefix table."
INDEX {rlIpv6RouterAdvertPrefixIfIndex,
rlIpv6RouterAdvertPrefixIsDefault,
rlIpv6RouterAdvertPrefixInetAddrType,
rlIpv6RouterAdvertPrefixInetAddr,
rlIpv6RouterAdvertPrefixInetAddrPrefixLength}
::= { rlIpv6RouterAdvertPrefixTable 1 }
RlIpv6RouterAdvertPrefixEntry ::= SEQUENCE {
rlIpv6RouterAdvertPrefixIfIndex InterfaceIndex,
rlIpv6RouterAdvertPrefixIsDefault TruthValue,
rlIpv6RouterAdvertPrefixInetAddrType InetAddressType,
rlIpv6RouterAdvertPrefixInetAddr InetAddress,
rlIpv6RouterAdvertPrefixInetAddrPrefixLength InetAddressPrefixLength,
rlIpv6RouterAdvertPrefixAdminStatus INTEGER,
rlIpv6RouterAdvertPrefixAdvertise TruthValue,
rlIpv6RouterAdvertPrefixOnLinkStatus INTEGER,
rlIpv6RouterAdvertPrefixAutonomousFlag TruthValue,
rlIpv6RouterAdvertPrefixAdvPreferredLifetime Unsigned32,
rlIpv6RouterAdvertPrefixAdvValidLifetime Unsigned32,
rlIpv6RouterAdvertPrefixRowStatus RowStatus
}
rlIpv6RouterAdvertPrefixIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index value that uniquely identifies the interface on
which this prefix is configured. The interface identified
by a particular value of this index is the same interface as
identified by the same value of the IF-MIB's ifIndex."
::= { rlIpv6RouterAdvertPrefixEntry 1 }
rlIpv6RouterAdvertPrefixIsDefault OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates whether this object belongs to 'default' entry.
Default entry contains specifics about advertising prefixes which
were created from local ipv6 addresses."
::= { rlIpv6RouterAdvertPrefixEntry 2 }
rlIpv6RouterAdvertPrefixInetAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Prefix inet address type. Has to be IPv6."
::= { rlIpv6RouterAdvertPrefixEntry 3 }
rlIpv6RouterAdvertPrefixInetAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IPv6 network prefix to include in router advertisements.
This argument must be in the form documented in RFC4293 where
the address is specified in hexadecimal using 16-bit values between
colons."
::= { rlIpv6RouterAdvertPrefixEntry 4 }
rlIpv6RouterAdvertPrefixInetAddrPrefixLength OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The length of the IPv6 prefix. A decimal value that indicates
how many of the high-order contiguous bits of the address comprise
the prefix (the network portion of the address)."
::= { rlIpv6RouterAdvertPrefixEntry 5 }
rlIpv6RouterAdvertPrefixAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Admin status of the entry. Relevant only for default entry."
DEFVAL { enable }
::= { rlIpv6RouterAdvertPrefixEntry 6 }
rlIpv6RouterAdvertPrefixAdvertise OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Whether the prefix is included in router advertisements."
DEFVAL { true }
::= { rlIpv6RouterAdvertPrefixEntry 7 }
rlIpv6RouterAdvertPrefixOnLinkStatus OBJECT-TYPE
SYNTAX INTEGER {
onlink (1), -- connected prefix
not-onlink (2), -- connected state of the prefix is not specified
off-link (3) -- not connected prefix
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If object has the value 'onlink(1)', this prefix is confidered as on-link.
This prefix will be advertised with the L-bit set and will be present
in the Routing Table.
If object has the value 'not-onlink(2)', this prefix will be advertised
with the L-bit clear, but connected state of the prefix will not be changed.
If object has the value 'offlink(3)', this prefix is confidered as on-link.
This prefix will be advertised with the L-bit clear, and will be
not present in the Routing Table."
DEFVAL { onlink }
::= { rlIpv6RouterAdvertPrefixEntry 8 }
rlIpv6RouterAdvertPrefixAutonomousFlag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If object has the value 'true(1)', this prefix indicates to hosts on
the local link that the specified prefix can be used for IPv6
autoconfiguration. The prefix will be advertised with the A-bit set."
DEFVAL { true }
::= { rlIpv6RouterAdvertPrefixEntry 9 }
rlIpv6RouterAdvertPrefixAdvPreferredLifetime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The amount of time (in seconds) that the specified IPv6 prefix is
advertised as being preferred."
DEFVAL { 604800 }
::= { rlIpv6RouterAdvertPrefixEntry 10 }
rlIpv6RouterAdvertPrefixAdvValidLifetime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The amount of time (in seconds) that the specified IPv6 prefix is
advertised as being valid."
DEFVAL { 2592000 }
::= { rlIpv6RouterAdvertPrefixEntry 11 }
rlIpv6RouterAdvertPrefixRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Row status."
::= { rlIpv6RouterAdvertPrefixEntry 12 }
--- ipv6RouterAdvertTable augmentation
rlIpv6RouterAdvertTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlIpv6RouterAdvertEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is parallel to inetCidrRouteTable, and is used to
configure or display additional route parameters."
::= { rlIPv6 7 }
rlIpv6RouterAdvertEntry OBJECT-TYPE
SYNTAX RlIpv6RouterAdvertEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Additional parameters for a particular route."
AUGMENTS { ipv6RouterAdvertEntry }
::= { rlIpv6RouterAdvertTable 1 }
RlIpv6RouterAdvertEntry ::= SEQUENCE {
rlIpv6RouterAdvertAdvIntervalOption TruthValue,
rlIpv6RouterAdvertRouterPreference INTEGER,
rlIpv6RouterAdvertIsCurHopLimitUserConfigured TruthValue
}
rlIpv6RouterAdvertAdvIntervalOption OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates to a visiting mobile node the interval at which that node
may expect to receive RAs. The node may use this information in its
movement detection algorithm."
DEFVAL { false }
::= { rlIpv6RouterAdvertEntry 1 }
rlIpv6RouterAdvertRouterPreference OBJECT-TYPE
SYNTAX INTEGER {
low(1),
medium(2),
high(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Configures a default router preference (DRP) for the router on a specific interface."
DEFVAL { medium }
::= { rlIpv6RouterAdvertEntry 2 }
rlIpv6RouterAdvertIsCurHopLimitUserConfigured OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates that hop limit value used in router advertisement is
an user configured value and not necessarily value that is used by
router itself."
DEFVAL { false }
::= { rlIpv6RouterAdvertEntry 3 }
--- Clear IPv6 routes
rlipv6InetCidrTableClear OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This scalar indicates to clear all ipv6 routes from inetCidrTable."
::= { rlIPv6 8 }
--- rlIpv6PathMtuTable
rlIpv6PathMtuTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlIpv6PathMtuEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table used to represent all Path MTU changes to specific destination
received from 'packet-too-big' messages."
::= { rlIPv6 9 }
rlIpv6PathMtuEntry OBJECT-TYPE
SYNTAX RlIpv6PathMtuEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Single entry in Path MTU table."
INDEX {rlIpv6PathMtuEntryInetDestAddrType,
rlIpv6PathMtuEntryInetDestAddr}
::= { rlIpv6PathMtuTable 1 }
RlIpv6PathMtuEntry ::= SEQUENCE {
rlIpv6PathMtuEntryInetDestAddrType InetAddressType,
rlIpv6PathMtuEntryInetDestAddr InetAddress,
rlIpv6PathMtuEntryMtu Unsigned32,
rlIpv6PathMtuEntryAge Unsigned32
}
rlIpv6PathMtuEntryInetDestAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Prefix inet address type. Has to be IPv6."
::= { rlIpv6PathMtuEntry 1 }
rlIpv6PathMtuEntryInetDestAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IPv6 destination address for which packet-too-big message
was received.
This argument must be in the form documented in RFC4293
where the address is specified in hexadecimal using 16-bit values
between colons."
::= { rlIpv6PathMtuEntry 2 }
rlIpv6PathMtuEntryMtu OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MTU value that was received in packet-too-bug message for
specific destination."
::= { rlIpv6PathMtuEntry 3 }
rlIpv6PathMtuEntryAge OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This entry's age (seconds)"
::= { rlIpv6PathMtuEntry 4 }
--- Inet IP Static Route Table
rlInetStaticRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlInetStaticRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entity's static (user configured) Inet Routing table.
Entries are MAX-ACCESSible even if not used for forwarding "
::= { ipSpec 28 }
rlInetStaticRouteEntry OBJECT-TYPE
SYNTAX RlInetStaticRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A particular Static(user configured) route to a particular destination."
INDEX {
rlInetStaticRouteDestType,
rlInetStaticRouteDest,
rlInetStaticRoutePfxLen,
rlInetStaticRouteNextHopType,
rlInetStaticRouteNextHop,
rlInetStaticRouteIfIndex
}
::= { rlInetStaticRouteTable 1 }
RlInetStaticRouteEntry ::= SEQUENCE {
rlInetStaticRouteDestType InetAddressType,
rlInetStaticRouteDest InetAddress,
rlInetStaticRoutePfxLen InetAddressPrefixLength,
rlInetStaticRouteNextHopType InetAddressType,
rlInetStaticRouteNextHop InetAddress,
rlInetStaticRouteIfIndex InterfaceIndexOrZero,
rlInetStaticRoutePathCost Unsigned32,
rlInetStaticRouteType INTEGER,
rlInetStaticRouteOwner INTEGER,
rlInetStaticRouteRowStatus RowStatus,
rlInetStaticRouteForwardingStatus INTEGER
}
rlInetStaticRouteDestType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of the address used as the destination
internetwork address or subnet address."
::= { rlInetStaticRouteEntry 1 }
rlInetStaticRouteDest OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Destination internetwork address or subnet address. The
destination prefix length is applied to this value, and to a
particular destination address, to determine whether the route
applies to the particular address.
If the prefix length is L, then applying the length to an address
means taking the first L bits of the address."
::= { rlInetStaticRouteEntry 2 }
rlInetStaticRoutePfxLen OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the number of leading one bits that form the
mask to be logical-ANDed with the destination address
before being compared to the value in the
rlInetStaticRouteDest field."
::= { rlInetStaticRouteEntry 3 }
rlInetStaticRouteNextHopType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The type of the address used as the next-hop address
for this route."
::= { rlInetStaticRouteEntry 4 }
rlInetStaticRouteNextHop OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The next-hop IP address, if any.
If rlInetStaticRouteAction is 'forward', there may or may not be
a next-hop IP address.
A next-hop IP address is not required if an output interface
index is specified (in other words, if rlInetStaticRouteIfIndex is
non-zero).
If rlInetStaticRouteAction is not 'forward', there is no next-hop
IP address.
If there is no next-hop IP address, the rlInetStaticRouteNextHop
object is set to all zeroes."
::= { rlInetStaticRouteEntry 5 }
rlInetStaticRouteIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ifIndex value that identifies the local interface
through which the next hop of this route should be
reached. A value of 0 is valid and represents the
scenario where no interface is specified."
DEFVAL { 0 }
::= { rlInetStaticRouteEntry 6 }
rlInetStaticRoutePathCost OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Path cost for this static route."
DEFVAL { 1 }
::= { rlInetStaticRouteEntry 7 }
rlInetStaticRouteType OBJECT-TYPE
SYNTAX INTEGER {
reject (2), -- route that discards traffic and
-- returns ICMP notification
local (3), -- local interface
remote (4), -- remote destination
blackhole(5), -- route that discards traffic
-- silently
nd (6) -- route that is configred through
-- neighbor discovery (relevant only for icmp owner)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Same as inetCidrRouteType MIB (excluded 'other' route type)"
DEFVAL { remote }
::= { rlInetStaticRouteEntry 8 }
rlInetStaticRouteOwner OBJECT-TYPE
SYNTAX INTEGER {
static (1),
dhcp (2),
default (3),
icmp (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Static - The route is configured over Static IP.
This route is written to configuration files.
Dhcp - The route is Configured by DHCP
(received as part of DHCP configuration)
This route IS NOT written to configuration files
Default - The route is Configured by default system config
exists till any other configuration is applied.
Icmp - The route is Configured by ICMP protocol either by
router advertisements or to be advertised in router
advertisements ."
::= { rlInetStaticRouteEntry 9 }
rlInetStaticRouteRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The row status variable, used according to row
installation and removal conventions.
A row entry cannot be modified when the status is
marked as active(1)."
::= { rlInetStaticRouteEntry 10 }
rlInetStaticRouteForwardingStatus OBJECT-TYPE
SYNTAX INTEGER {
active (1),
inactive (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"active - An indication that the route has implication on routing
inactive - the route is a backup route or it is down. It is not used
in forwarding decision.
Down means that the Ip interface on which it is configured is down.
(Note: ip interface down may be for two reason - its admin status or
the L2 interface , on which the ip interface is configured, status"
::= { rlInetStaticRouteEntry 11 }
--- Clear entries from ipNetToPhysicalTable
rlIpNetToPhysicalTableClearTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlIpNetToPhysicalTableClearEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entity is used to clear all or specific-type entries from ipNetToPhysicalTable."
::= { rlIPv6 10 }
rlIpNetToPhysicalTableClearEntry OBJECT-TYPE
SYNTAX RlIpNetToPhysicalTableClearEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A particular entry in this table."
INDEX {
rlIpNetToPhysicalTableClearIfIndex
}
::= { rlIpNetToPhysicalTableClearTable 1 }
RlIpNetToPhysicalTableClearEntry ::= SEQUENCE {
rlIpNetToPhysicalTableClearIfIndex InterfaceIndexOrZero,
rlIpNetToPhysicalTableClearScope INTEGER
}
rlIpNetToPhysicalTableClearIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Interface index of to clear or zero in case of whole table."
::= { rlIpNetToPhysicalTableClearEntry 1 }
rlIpNetToPhysicalTableClearScope OBJECT-TYPE
SYNTAX INTEGER {
all(1),
dynamicOnly(2),
staticOnly(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Scope of the action - type of entries to delete."
::= { rlIpNetToPhysicalTableClearEntry 2 }
--- Inet IP Distance Table
rlInetRoutingDistanceTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlInetRoutingDistanceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table defines administrative distances for
different protocol routes that are inserted into
the routing table."
::= { ipSpec 29 }
rlInetRoutingDistanceEntry OBJECT-TYPE
SYNTAX RlInetRoutingDistanceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A set of distances per inet address type."
INDEX {
rlInetRoutingDistanceType
}
::= { rlInetRoutingDistanceTable 1 }
RlInetRoutingDistanceEntry ::= SEQUENCE {
rlInetRoutingDistanceType INTEGER,
rlInetRoutingDistanceConnected INTEGER,
rlInetRoutingDistanceStatic INTEGER,
rlInetRoutingDistanceRip INTEGER,
rlInetRoutingDistanceOspfInternal INTEGER,
rlInetRoutingDistanceOspfExternal INTEGER
}
rlInetRoutingDistanceType OBJECT-TYPE
SYNTAX INTEGER {
ipv4(1),
ipv6(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The inet address type for distance definitions set,
either IPv4 or IPv6."
::= { rlInetRoutingDistanceEntry 1 }
rlInetRoutingDistanceConnected OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative distance used for directly connected routes."
::= { rlInetRoutingDistanceEntry 2 }
rlInetRoutingDistanceStatic OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative distance used for static routes."
::= { rlInetRoutingDistanceEntry 3 }
rlInetRoutingDistanceRip OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative distance used for RIP routes."
::= { rlInetRoutingDistanceEntry 4 }
rlInetRoutingDistanceOspfInternal OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative distance used for OSPF internal routes."
::= { rlInetRoutingDistanceEntry 5 }
rlInetRoutingDistanceOspfExternal OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative distance used for OSPF Autonomous System external routes."
::= { rlInetRoutingDistanceEntry 6 }
--- Internal inetCidrRouteTable (including custom rlInetCidrRouteEntry objects)
rlInternInetCidrRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlInternInetCidrRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Internal inetCidrRouteTable - this entity's IP Routing table."
REFERENCE
"RFC 1213 Section 6.6, The IP Group"
::= { ipSpec 30 }
rlInternInetCidrRouteEntry OBJECT-TYPE
SYNTAX RlInternInetCidrRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A particular route to a particular destination, under a
particular policy (as reflected in the
rlInternInetCidrRoutePolicy object).
Dynamically created rows will survive an agent reboot.
Implementers need to be aware that if the total number
of elements (octets or sub-identifiers) in
rlInternInetCidrRouteDest, rlInternInetCidrRoutePolicy, and
rlInternInetCidrRouteNextHop exceeds 111, then OIDs of column
instances in this table will have more than 128 sub-
identifiers and cannot be accessed using SNMPv1,
SNMPv2c, or SNMPv3."
INDEX {
rlInternInetCidrRouteDestType,
rlInternInetCidrRouteDest,
rlInternInetCidrRoutePfxLen,
rlInternInetCidrRoutePolicy,
rlInternInetCidrRouteNextHopType,
rlInternInetCidrRouteNextHop
}
::= { rlInternInetCidrRouteTable 1 }
RlInternInetCidrRouteEntry ::= SEQUENCE {
rlInternInetCidrRouteDestType InetAddressType,
rlInternInetCidrRouteDest InetAddress,
rlInternInetCidrRoutePfxLen InetAddressPrefixLength,
rlInternInetCidrRoutePolicy OBJECT IDENTIFIER,
rlInternInetCidrRouteNextHopType InetAddressType,
rlInternInetCidrRouteNextHop InetAddress,
rlInternInetCidrRouteIfIndex InterfaceIndexOrZero,
rlInternInetCidrRouteType INTEGER,
rlInternInetCidrRouteProto IANAipRouteProtocol,
rlInternInetCidrRouteAge Gauge32,
rlInternInetCidrRouteNextHopAS InetAutonomousSystemNumber,
rlInternInetCidrRouteMetric1 Integer32,
rlInternInetCidrRouteMetric2 Integer32,
rlInternInetCidrRouteMetric3 Integer32,
rlInternInetCidrRouteMetric4 Integer32,
rlInternInetCidrRouteMetric5 Integer32,
rlInternInetCidrRouteStatus RowStatus,
rlInternInetCidrRouteLifetime Unsigned32,
rlInternInetCidrRouteInfo INTEGER
}
rlInternInetCidrRouteDestType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The type of the rlInternInetCidrRouteDest address, as defined
in the InetAddress MIB.
Only those address types that may appear in an actual
routing table are allowed as values of this object."
REFERENCE "RFC 4001"
::= { rlInternInetCidrRouteEntry 1 }
rlInternInetCidrRouteDest OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The destination IP address of this route.
The type of this address is determined by the value of
the rlInternInetCidrRouteDestType object.
The values for the index objects rlInternInetCidrRouteDest and
rlInternInetCidrRoutePfxLen must be consistent. When the value
of rlInternInetCidrRouteDest (excluding the zone index, if one
is present) is x, then the bitwise logical-AND
of x with the value of the mask formed from the
corresponding index object rlInternInetCidrRoutePfxLen MUST be
equal to x. If not, then the index pair is not
consistent and an inconsistentName error must be
returned on SET or CREATE requests."
::= { rlInternInetCidrRouteEntry 2 }
rlInternInetCidrRoutePfxLen OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the number of leading one bits that form the
mask to be logical-ANDed with the destination address
before being compared to the value in the
rlInternInetCidrRouteDest field.
The values for the index objects rlInternInetCidrRouteDest and
rlInternInetCidrRoutePfxLen must be consistent. When the value
of rlInternInetCidrRouteDest (excluding the zone index, if one
is present) is x, then the bitwise logical-AND
of x with the value of the mask formed from the
corresponding index object rlInternInetCidrRoutePfxLen MUST be
equal to x. If not, then the index pair is not
consistent and an inconsistentName error must be
returned on SET or CREATE requests."
::= { rlInternInetCidrRouteEntry 3 }
rlInternInetCidrRoutePolicy OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object is an opaque object without any defined
semantics. Its purpose is to serve as an additional
index that may delineate between multiple entries to
the same destination. The value { 0 0 } shall be used
as the default value for this object."
::= { rlInternInetCidrRouteEntry 4 }
rlInternInetCidrRouteNextHopType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The type of the rlInternInetCidrRouteNextHop address, as
defined in the InetAddress MIB.
Value should be set to unknown(0) for non-remote
routes.
Only those address types that may appear in an actual
routing table are allowed as values of this object."
REFERENCE "RFC 4001"
::= { rlInternInetCidrRouteEntry 5 }
rlInternInetCidrRouteNextHop OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"On remote routes, the address of the next system en
route. For non-remote routes, a zero length string.
The type of this address is determined by the value of
the rlInternInetCidrRouteNextHopType object."
::= { rlInternInetCidrRouteEntry 6 }
rlInternInetCidrRouteIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ifIndex value that identifies the local interface
through which the next hop of this route should be
reached. A value of 0 is valid and represents the
scenario where no interface is specified."
::= { rlInternInetCidrRouteEntry 7 }
rlInternInetCidrRouteType OBJECT-TYPE
SYNTAX INTEGER {
other (1), -- not specified by this MIB
reject (2), -- route that discards traffic and
-- returns ICMP notification
local (3), -- local interface
remote (4), -- remote destination
blackhole(5) -- route that discards traffic
-- silently
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of route. Note that local(3) refers to a
route for which the next hop is the final destination;
remote(4) refers to a route for which the next hop is
not the final destination.
Routes that do not result in traffic forwarding or
rejection should not be displayed, even if the
implementation keeps them stored internally.
reject(2) refers to a route that, if matched, discards
the message as unreachable and returns a notification
(e.g., ICMP error) to the message sender. This is used
in some protocols as a means of correctly aggregating
routes.
blackhole(5) refers to a route that, if matched,
discards the message silently."
::= { rlInternInetCidrRouteEntry 8 }
rlInternInetCidrRouteProto OBJECT-TYPE
SYNTAX IANAipRouteProtocol
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The routing mechanism via which this route was learned.
Inclusion of values for gateway routing protocols is
not intended to imply that hosts should support those
protocols."
::= { rlInternInetCidrRouteEntry 9 }
rlInternInetCidrRouteAge OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of seconds since this route was last updated
or otherwise determined to be correct. Note that no
semantics of 'too old' can be implied, except through
knowledge of the routing protocol by which the route
was learned."
::= { rlInternInetCidrRouteEntry 10 }
rlInternInetCidrRouteNextHopAS OBJECT-TYPE
SYNTAX InetAutonomousSystemNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Autonomous System Number of the Next Hop. The
semantics of this object are determined by the routing-
protocol specified in the route's rlInternInetCidrRouteProto
value. When this object is unknown or not relevant, its
value should be set to zero."
DEFVAL { 0 }
::= { rlInternInetCidrRouteEntry 11 }
rlInternInetCidrRouteMetric1 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The primary routing metric for this route. The
semantics of this metric are determined by the routing-
protocol specified in the route's rlInternInetCidrRouteProto
value. If this metric is not used, its value should be
set to -1."
DEFVAL { -1 }
::= { rlInternInetCidrRouteEntry 12 }
rlInternInetCidrRouteMetric2 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An alternate routing metric for this route. The
semantics of this metric are determined by the routing-
protocol specified in the route's rlInternInetCidrRouteProto
value. If this metric is not used, its value should be
set to -1."
DEFVAL { -1 }
::= { rlInternInetCidrRouteEntry 13 }
rlInternInetCidrRouteMetric3 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An alternate routing metric for this route. The
semantics of this metric are determined by the routing-
protocol specified in the route's rlInternInetCidrRouteProto
value. If this metric is not used, its value should be
set to -1."
DEFVAL { -1 }
::= { rlInternInetCidrRouteEntry 14 }
rlInternInetCidrRouteMetric4 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An alternate routing metric for this route. The
semantics of this metric are determined by the routing-
protocol specified in the route's rlInternInetCidrRouteProto
value. If this metric is not used, its value should be
set to -1."
DEFVAL { -1 }
::= { rlInternInetCidrRouteEntry 15 }
rlInternInetCidrRouteMetric5 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An alternate routing metric for this route. The
semantics of this metric are determined by the routing-
protocol specified in the route's rlInternInetCidrRouteProto
value. If this metric is not used, its value should be
set to -1."
DEFVAL { -1 }
::= { rlInternInetCidrRouteEntry 16 }
rlInternInetCidrRouteStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The row status variable, used according to row
installation and removal conventions.
A row entry cannot be modified when the status is
marked as active(1)."
::= { rlInternInetCidrRouteEntry 17 }
rlInternInetCidrRouteLifetime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The remaining length of time, in seconds, that this route
will continue to be valid, i.e., time until deprecation.
A value of 4,294,967,295 represents infinity."
DEFVAL { 4294967295 }
::= { rlInternInetCidrRouteEntry 18 }
rlInternInetCidrRouteInfo OBJECT-TYPE
SYNTAX INTEGER {
none(0),
ospfIntraArea(1),
ospfInterArea(2),
ospfExternalType1(3),
ospfExternalType2(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A reference to MIB definitions specific to the particular routing
protocol which is responsible for this route, as determined by the
value specified in the route's inetCidrRouteProto value."
DEFVAL { none }
::= { rlInternInetCidrRouteEntry 19 }
--- Internal Inet IP Static Route Table
rlInternInetStaticRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlInternInetStaticRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entity's static (user configured) Inet Routing table.
Entries are MAX-ACCESSible even if not used for forwarding "
::= { ipSpec 31 }
rlInternInetStaticRouteEntry OBJECT-TYPE
SYNTAX RlInternInetStaticRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A particular Static(user configured) route to a particular destination."
INDEX {
rlInternInetStaticRouteDestType,
rlInternInetStaticRouteDest,
rlInternInetStaticRoutePfxLen,
rlInternInetStaticRouteNextHopType,
rlInternInetStaticRouteNextHop,
rlInternInetStaticRouteIfIndex
}
::= { rlInternInetStaticRouteTable 1 }
RlInternInetStaticRouteEntry ::= SEQUENCE {
rlInternInetStaticRouteDestType InetAddressType,
rlInternInetStaticRouteDest InetAddress,
rlInternInetStaticRoutePfxLen InetAddressPrefixLength,
rlInternInetStaticRouteNextHopType InetAddressType,
rlInternInetStaticRouteNextHop InetAddress,
rlInternInetStaticRouteIfIndex InterfaceIndexOrZero,
rlInternInetStaticRoutePathCost Unsigned32,
rlInternInetStaticRouteType INTEGER,
rlInternInetStaticRouteOwner INTEGER,
rlInternInetStaticRouteRowStatus RowStatus,
rlInternInetStaticRouteForwardingStatus INTEGER
}
rlInternInetStaticRouteDestType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of the address used as the destination
internetwork address or subnet address."
::= { rlInternInetStaticRouteEntry 1 }
rlInternInetStaticRouteDest OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Destination internetwork address or subnet address. The
destination prefix length is applied to this value, and to a
particular destination address, to determine whether the route
applies to the particular address.
If the prefix length is L, then applying the length to an address
means taking the first L bits of the address."
::= { rlInternInetStaticRouteEntry 2 }
rlInternInetStaticRoutePfxLen OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the number of leading one bits that form the
mask to be logical-ANDed with the destination address
before being compared to the value in the
rlInternInetStaticRouteDest field."
::= { rlInternInetStaticRouteEntry 3 }
rlInternInetStaticRouteNextHopType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The type of the address used as the next-hop address
for this route."
::= { rlInternInetStaticRouteEntry 4 }
rlInternInetStaticRouteNextHop OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The next-hop IP address, if any.
If rlInternInetStaticRouteAction is 'forward', there may or may not be
a next-hop IP address.
A next-hop IP address is not required if an output interface
index is specified (in other words, if rlInternInetStaticRouteIfIndex is
non-zero).
If rlInternInetStaticRouteAction is not 'forward', there is no next-hop
IP address.
If there is no next-hop IP address, the rlInternInetStaticRouteNextHop
object is set to all zeroes."
::= { rlInternInetStaticRouteEntry 5 }
rlInternInetStaticRouteIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ifIndex value that identifies the local interface
through which the next hop of this route should be
reached. A value of 0 is valid and represents the
scenario where no interface is specified."
DEFVAL { 0 }
::= { rlInternInetStaticRouteEntry 6 }
rlInternInetStaticRoutePathCost OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Path cost for this static route. Value of 0 signs default value metric"
::= { rlInternInetStaticRouteEntry 7 }
rlInternInetStaticRouteType OBJECT-TYPE
SYNTAX INTEGER {
reject (2), -- route that discards traffic and
-- returns ICMP notification
local (3), -- local interface
remote (4), -- remote destination
blackhole(5), -- route that discards traffic
-- silently
nd (6) -- route that is configred through
-- neighbor discovery (relevant only for icmp owner)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Same as inetCidrRouteType MIB (excluded 'other' route type)"
DEFVAL { remote }
::= { rlInternInetStaticRouteEntry 8 }
rlInternInetStaticRouteOwner OBJECT-TYPE
SYNTAX INTEGER {
static (1),
dhcp (2),
default (3),
icmp (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Static - The route is configured over Static IP.
This route is written to configuration files.
Dhcp - The route is Configured by DHCP
(received as part of DHCP configuration)
This route IS NOT written to configuration files
Default - The route is Configured by default system config
exists till any other configuration is applied.
Icmp - The route is Configured by ICMP protocol either by
router advertisements or to be advertised in router
advertisements ."
::= { rlInternInetStaticRouteEntry 9 }
rlInternInetStaticRouteRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The row status variable, used according to row
installation and removal conventions.
A row entry cannot be modified when the status is
marked as active(1)."
::= { rlInternInetStaticRouteEntry 10 }
rlInternInetStaticRouteForwardingStatus OBJECT-TYPE
SYNTAX INTEGER {
active (1),
inactive (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"active - An indication that the route has implication on routing
inactive - the route is a backup route or it is down. It is not used
in forwarding decision.
Down means that the Ip interface on which it is configured is down."
::= { rlInternInetStaticRouteEntry 11 }
--- IPv6 Host Forwarding Table
rlIpv6HostForwardingTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlIpv6HostForwardingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entity's IPv6 host forwarding table."
::= { rlIPv6 11 }
rlIpv6HostForwardingEntry OBJECT-TYPE
SYNTAX RlIpv6HostForwardingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A particular Static(user configured) route to a particular destination."
INDEX {
rlIpv6HostForwardingDestType,
rlIpv6HostForwardingDest,
rlIpv6HostForwardingPfxLen,
rlIpv6HostForwardingNextHopType,
rlIpv6HostForwardingNextHop,
rlIpv6HostForwardingIfIndex,
rlIpv6HostForwardingType
}
::= { rlIpv6HostForwardingTable 1 }
RlIpv6HostForwardingEntry ::= SEQUENCE {
rlIpv6HostForwardingDestType InetAddressType,
rlIpv6HostForwardingDest InetAddress,
rlIpv6HostForwardingPfxLen InetAddressPrefixLength,
rlIpv6HostForwardingNextHopType InetAddressType,
rlIpv6HostForwardingNextHop InetAddress,
rlIpv6HostForwardingIfIndex InterfaceIndexOrZero,
rlIpv6HostForwardingType INTEGER,
rlIpv6HostForwardingPathCost Unsigned32
}
rlIpv6HostForwardingDestType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of the address used as the destination
internetwork address or subnet address."
::= { rlIpv6HostForwardingEntry 1 }
rlIpv6HostForwardingDest OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Destination internetwork address or subnet address."
::= { rlIpv6HostForwardingEntry 2 }
rlIpv6HostForwardingPfxLen OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the number of leading one bits that form the
mask to be logical-ANDed with the destination address
before being compared to the value in the
rlIpv6HostForwardingDest field."
::= { rlIpv6HostForwardingEntry 3 }
rlIpv6HostForwardingNextHopType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The type of the address used as the next-hop address
for this route."
::= { rlIpv6HostForwardingEntry 4 }
rlIpv6HostForwardingNextHop OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The next-hop IP address, if any.
A next-hop IP address is not required if an output interface
index is specified (in other words, if rlIpv6HostForwardingIfIndex is
non-zero).
If there is no next-hop IP address, the rlIpv6HostForwardingNextHop
object is set to all zeroes."
::= { rlIpv6HostForwardingEntry 5 }
rlIpv6HostForwardingIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ifIndex value that identifies the local interface
through which the next hop of this route should be
reached. A value of 0 is valid and represents the
scenario where no interface is specified."
DEFVAL { 0 }
::= { rlIpv6HostForwardingEntry 6 }
rlIpv6HostForwardingType OBJECT-TYPE
SYNTAX INTEGER {
redirect (1), -- ICMP redirect
local (2), -- local interface (subnet)
nd (3), -- route that is configred through router advertisment (on-link prefix)
remote-static (4), -- default static route
remote-dynamic (5) -- default dynamic route
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Forwarding type"
::= { rlIpv6HostForwardingEntry 7 }
rlIpv6HostForwardingPathCost OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Path cost for this route."
::= { rlIpv6HostForwardingEntry 8 }
rlipv6EnabledByDefaultRemovedIfindex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION "the MIB is relevant when mtsc parameter DHCPv6_client_enabled_by_default is TRUE.
If the MIB has non zero value the meaning is that ipv6 interface has removed from configuration by the user
on the interface and signs to application not to add ipv6 interface. Otherwise (zero value) - the meaning is
that Ipv6 interface must be added. "
DEFVAL{ 0 }
::= { rlIPv6 12 }
--- rlManagementIPv6
rlManagementIpv6 OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The system management IPv6 address which is kept between system mode changes"
::= { rlIPv6 13 }
rlManagementIpv6Action OBJECT-TYPE
SYNTAX INTEGER {
clear (1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The system management IPv6 action:
clear - delete all ipv6 interfaces from startup configuration database except rlManagementIpv6"
::= { rlIPv6 14 }
--- IPv6 Tunnel if/addr/prefix Table (internal mib)
rlIpv6TunnelToIPv6DbTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlIpv6TunnelToIPv6DbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entity's IPv6 Tunnel if/addr/prefix table."
::= { rlIPv6 15 }
rlIpv6TunnelToIPv6DbEntry OBJECT-TYPE
SYNTAX RlIpv6TunnelToIPv6DbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A particular tunnel configured data to IPv6 db."
INDEX {
rlIpv6TunnelToIPv6IfIndex
}
::= { rlIpv6TunnelToIPv6DbTable 1 }
RlIpv6TunnelToIPv6DbEntry ::= SEQUENCE {
rlIpv6TunnelToIPv6IfIndex InterfaceIndex,
rlIpv6TunnelToIPv6Action INTEGER,
rlIpv6TunnelToIPv6TunnelType IANAtunnelType,
rlIpv6TunnelToIPv6Address InetAddress,
rlIpv6TunnelToIPv6PrefixLength Unsigned32,
rlIpv6TunnelToIPv6Mtu Unsigned32,
rlIpv6TunnelToIPv6MinRtrSolicitationInterval Unsigned32,
rlIpv6TunnelToIPv6LinkLayerIPv4 IpAddress
}
rlIpv6TunnelToIPv6IfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IfIndex of tunnel interface"
::= { rlIpv6TunnelToIPv6DbEntry 1 }
rlIpv6TunnelToIPv6Action OBJECT-TYPE
SYNTAX INTEGER {
createTunnel (1), -- create Tunnel interface
destroyTunnel (2), -- destroy Tunnel interface
addAddress (3), -- add IPv6 Address
deleteAddress (4), -- delete IPv6 Address
updateAddresses (5), -- refresh IPv6 Address on tunnel interface (if link-layer address was changed)
six2fourCfgRestore(6), -- restore lost 6to4 configuration
six2fourCfgClear (7) -- clear stale 6to4 configuration
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Action of the entry. All other fields relevant for appropriate actions."
::= { rlIpv6TunnelToIPv6DbEntry 2 }
rlIpv6TunnelToIPv6TunnelType OBJECT-TYPE
SYNTAX IANAtunnelType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Tunnel type (manual/isatap/6to4/...)."
::= { rlIpv6TunnelToIPv6DbEntry 3 }
rlIpv6TunnelToIPv6Address OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The address used for this tunnel. Could be local IPv4 of the tunnel."
::= { rlIpv6TunnelToIPv6DbEntry 4 }
rlIpv6TunnelToIPv6PrefixLength OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The address/prefix length used for above address if applicable."
::= { rlIpv6TunnelToIPv6DbEntry 5 }
rlIpv6TunnelToIPv6Mtu OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Mtu of this interface. Used for host isatap tunnels"
::= { rlIpv6TunnelToIPv6DbEntry 6 }
rlIpv6TunnelToIPv6MinRtrSolicitationInterval OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Minimal router solicitation interval. Used for host isatap tunnels"
::= { rlIpv6TunnelToIPv6DbEntry 7 }
rlIpv6TunnelToIPv6LinkLayerIPv4 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IPv4 address used for link-layer of ipv6 over ipv4 tunnel"
::= { rlIpv6TunnelToIPv6DbEntry 8 }
rlIpv6DefaultTC OBJECT-TYPE
SYNTAX INTEGER(0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The default value inserted into the TC
field of the IPv6 header of datagrams originated at
this entity, whenever a TC value is not supplied
by the application."
::= { rlIPv6 16 }
rlIpv6DefaultUP OBJECT-TYPE
SYNTAX INTEGER(0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The default value inserted into the User Priority
field in the 802.1q VLAN tag of IPv4 frames sent by the
CPU."
::= { rlIPv6 17 }
rlIpv6MtuSize OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the maximum transmission unit (MTU) size in bytes of IPv6 packets (payload)."
::= { rlIPv6 18 }
END
Reference in New Issue Copy Permalink