mibs/MIBS/raisecom/RAISECOM-POWERMONITOR-MIB

173 lines
5.9 KiB
Plaintext
Raw Permalink Normal View History

2023-12-05 12:25:34 +01:00
-- MibName=rcPowerMonitor
-- *****************************************************************
-- Version 1.0 Created 2011.1.25 by wangjiangbo
-- This version of MIB is created just for the Management of Power .
--
-- Copyright(c) 2002-2012 by RAISECOM TECH, Ltd.
-- All rights reserved.
--
-- modify history
-- 01<30><31>20110901,hetao, <20><><EFBFBD><EFBFBD> raisecomPowerStatusTrap<61><70> raisecomPowerStatus
-- *****************************************************************
RAISECOM-POWERMONITOR-MIB DEFINITIONS ::= BEGIN
IMPORTS
raisecomAgent
FROM RAISECOM-BASE-MIB
-- TruthValue
-- FROM SNMPv2-TC
Integer32,Unsigned32,Counter32
FROM SNMPv2-SMI;
raisecomPowerMonitor MODULE-IDENTITY
LAST-UPDATED "201101190000Z"
ORGANIZATION "Raisecom, Inc."
CONTACT-INFO
" Raise Systems
Postal: Beijing,
China
Tel: 86-010-82884499
E-mail: support@raisecom.com"
DESCRIPTION "The initial revision of this MIB."
::= { raisecomAgent 24}
--
-- groups in the raisecomPowerMonitor MIB
--
raisecomPowerMonitorNotification OBJECT IDENTIFIER ::= { raisecomPowerMonitor 1 }
raisecomPowerMonitorMibObjects OBJECT IDENTIFIER ::= { raisecomPowerMonitor 2 }
--
-- raisecomPowerMonitorNotification
--
raisecomPowerVoltNormal NOTIFICATION-TYPE
OBJECTS { raisecomPowerIndex,
raisecomPowerVoltReference,
raisecomPowerVoltValue
}
STATUS current
DESCRIPTION
"The trap notification occur when power-card value translating from abnormal to normal."
::= { raisecomPowerMonitorNotification 1 }
raisecomPowerVoltAbnormal NOTIFICATION-TYPE
OBJECTS { raisecomPowerIndex,
raisecomPowerVoltReference,
raisecomPowerVoltValue
}
STATUS current
DESCRIPTION
"The trap notification occur when power-card value translating from normal to abnormal."
::= { raisecomPowerMonitorNotification 2 }
raisecomPowerStatusTrap NOTIFICATION-TYPE
-- OBJECTS { raisecomAlarmHistStatus, raisecomAlarmHistSource,raisecomAlarmHistDescr, raisecomAlarmHistTimestamp, raisecomAlarmHistType }
OBJECTS { raisecomPowerIndex,
raisecomPowerStatus
}
STATUS current
DESCRIPTION
"A raisecomPowerTrap trap is sent when a power alarm generate."
::= { raisecomPowerMonitorNotification 3 }
raisecomDyingGaspTrap NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"Dying gasp."
::= { raisecomPowerMonitorNotification 4 }
--
-- raisecomPowerMonitorStateTable
--
raisecomPowerMonitorStateTable OBJECT-TYPE
SYNTAX SEQUENCE OF RaisecomPowerMonitorStateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Power monitor state table."
::= { raisecomPowerMonitorMibObjects 1 }
raisecomPowerMonitorStateEntry OBJECT-TYPE
SYNTAX RaisecomPowerMonitorStateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Power monitor state entry."
INDEX { raisecomPowerIndex }
::= { raisecomPowerMonitorStateTable 1 }
RaisecomPowerMonitorStateEntry ::= SEQUENCE {
raisecomPowerIndex Unsigned32,
raisecomPowerSerialNumber OCTET STRING,
raisecomPowerType INTEGER,
raisecomPowerVoltReference INTEGER,
raisecomPowerVoltValue INTEGER,
raisecomPowerStatus INTEGER
}
raisecomPowerIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Specify the sequence number of Power."
::= { raisecomPowerMonitorStateEntry 1 }
raisecomPowerSerialNumber OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"specify the identical serial number of current power card,this
string number will be set when device leaving factory"
::= { raisecomPowerMonitorStateEntry 2 }
raisecomPowerType OBJECT-TYPE
SYNTAX INTEGER
{
ac(1),
dc(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specify the current type of the power.
ac(1) means the current power AC Input.
dc(2) means the current power DC Input."
::= { raisecomPowerMonitorStateEntry 3 }
raisecomPowerVoltReference OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specify the reference of the volt value of Power."
::= { raisecomPowerMonitorStateEntry 4 }
raisecomPowerVoltValue OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specify the volt value of Power."
::= { raisecomPowerMonitorStateEntry 5 }
raisecomPowerStatus OBJECT-TYPE
SYNTAX INTEGER {
offline(1),
online(2),
power-on(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of power alarm."
::= {raisecomPowerMonitorStateEntry 6 }
END