mibs/MIBS/ray/RAY3-MIB

889 lines
22 KiB
Plaintext
Raw Permalink Normal View History

2023-12-05 12:25:34 +01:00
RAY3-MIB DEFINITIONS ::= BEGIN
IMPORTS
enterprises, IpAddress, Gauge
FROM RFC1155-SMI
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
Unsigned32, TimeTicks, Counter32, Gauge32, Integer32, Counter64
FROM SNMPv2-SMI
DateAndTime, TEXTUAL-CONVENTION
FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
mib-2 FROM SNMPv2-SMI
snmpTraps
FROM SNMPv2-MIB;
racom MODULE-IDENTITY
LAST-UPDATED "201910210000Z"
ORGANIZATION "Racom s.r.o"
CONTACT-INFO
"Racom s.r.o
Mirova 1283
592 31 Nove Mesto na Morave
Czech Republic
Tel: +420 722 937 522
E-mail: racom@racom.eu"
DESCRIPTION "The MIB module defines management objects for RAy product series. Revision 201909200000Z."
REVISION "201910210000Z"
DESCRIPTION "Latest version of this MIB module"
::= { enterprises 33555 }
Tenths ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d-1"
STATUS current
DESCRIPTION "Numeric 32-bit type with 0.1 precision without subtyping."
SYNTAX Integer32
Hundredths ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d-2"
STATUS current
DESCRIPTION "Numeric 32-bit type with 0.01 precision without subtyping."
SYNTAX Integer32
Thousandths ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d-3"
STATUS current
DESCRIPTION "Numeric 32-bit type with 0.001 precision without subtyping."
SYNTAX Integer32
DisplayStringRaw ::= TEXTUAL-CONVENTION
DISPLAY-HINT "1t"
STATUS current
DESCRIPTION "Unlimited display string - UTF8 encoding."
SYNTAX OCTET STRING
PhysAddressRaw ::= TEXTUAL-CONVENTION
DISPLAY-HINT "1x"
STATUS current
DESCRIPTION "Unlimited physic address - hexadecimal encoding for each octet."
SYNTAX OCTET STRING
ServiceState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "System service or device state."
SYNTAX INTEGER {
na (0), -- service/device state not available
up (1), -- service is running or device is up
down (2) -- service is not running or device is down
}
AlarmState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Alarm status."
SYNTAX INTEGER {
na (0), -- alarm state not available
up (1), -- alarm up
down (2), -- alarm down
ack (3) -- alarm up and acknowledged
}
OptionSetting ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Setting of some options."
SYNTAX INTEGER {
na (0),
on (1),
off (2)
}
ModulationList ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Radio channel modulations numerical list"
SYNTAX INTEGER {
na (0),
qpskS (1),
qpsk (2),
qam16 (3),
qam32 (4),
qam64 (5),
qam128 (6),
qam256 (7),
qam512 (8),
qam1024 (9),
qam2048 (10),
qam4096 (11)
}
ray3 OBJECT IDENTIFIER ::= { racom 4 }
station OBJECT IDENTIFIER ::= {ray3 1}
interface OBJECT IDENTIFIER ::= {ray3 2}
statistic OBJECT IDENTIFIER ::= {ray3 3}
switch OBJECT IDENTIFIER ::= {ray3 4}
ray3Traps OBJECT IDENTIFIER ::= {ray3 12}
-- station MIB
product OBJECT IDENTIFIER ::= {station 1}
info OBJECT IDENTIFIER ::= {station 2}
status OBJECT IDENTIFIER ::= {station 3}
chassis OBJECT IDENTIFIER ::= {station 4}
system OBJECT IDENTIFIER ::= {station 5}
access OBJECT IDENTIFIER ::= {station 6}
alarm OBJECT IDENTIFIER ::= {station 8}
-- product MIB
productName OBJECT-TYPE
SYNTAX DisplayStringRaw (SIZE(0..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Product name."
::= { product 1 }
serialNumber OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Product serial number."
::= { product 2 }
unitType OBJECT-TYPE
SYNTAX DisplayStringRaw (SIZE(0..4))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Station type (L or H)."
::= { product 3 }
-- info MIB
deviceName OBJECT-TYPE
SYNTAX DisplayStringRaw (SIZE(0..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Station name."
::= { info 1 }
swVer OBJECT-TYPE
SYNTAX DisplayStringRaw (SIZE(0..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Firmware version."
::= { info 2 }
swVerRadio OBJECT-TYPE
SYNTAX DisplayStringRaw (SIZE(0..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Radio firmware version."
::= { info 3 }
-- status mib
systemStatus OBJECT-TYPE
SYNTAX INTEGER {
na (0),
ok (1),
warning (2),
alarm (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Unit status."
::= { status 1 }
peerNumber OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Peer station serial number."
::= { status 3 }
securePeerMode OBJECT-TYPE
SYNTAX OptionSetting
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Secure peer mode."
::= { status 7 }
lineStatusII OBJECT-TYPE
SYNTAX INTEGER {
na (0),
setup (1),
single (2),
connecting (3),
authorizing (4),
ok (5),
analyzer (6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Radio link status."
::= { status 8 }
eth1Link OBJECT-TYPE
SYNTAX ServiceState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Ethernet 1 link status."
::= { status 9 }
eth2Link OBJECT-TYPE
SYNTAX ServiceState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Ethernet 2 link status."
::= { status 10 }
-- chassis mib
temperatureModem OBJECT-TYPE
SYNTAX Hundredths (-10000..10000)
UNITS "deg C"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Modem temperature in hundredths of Celsius."
::= { chassis 1 }
temperatureRadio OBJECT-TYPE
SYNTAX Hundredths (-10000..10000)
UNITS "deg C"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Radio temperature in hundredths of Celsius."
::= { chassis 2}
voltageUnit OBJECT-TYPE
SYNTAX Tenths (0..1000)
UNITS "V"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Power supply voltage in tenths of Volts (V)."
::= { chassis 3 }
voltageSource OBJECT-TYPE
SYNTAX INTEGER {
na (0),
aux (1),
poe (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Source of supply voltage."
::= { chassis 4 }
-- system mib
useCpu OBJECT-TYPE
SYNTAX INTEGER
UNITS "%"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "System use CPU in %."
::= { system 1 }
useMemory OBJECT-TYPE
SYNTAX INTEGER
UNITS "%"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "System use memory in %."
::= { system 2 }
useLogStorage OBJECT-TYPE
SYNTAX INTEGER
UNITS "%"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Use storage for log in %."
::= { system 3 }
-- access mib
sshd OBJECT-TYPE
SYNTAX INTEGER {
on (1),
onlykey (2),
off (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Management interface: SSH."
::= { access 1 }
telnetd OBJECT-TYPE
SYNTAX OptionSetting
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Management interface: Telnet."
::= { access 2 }
httpd OBJECT-TYPE
SYNTAX OptionSetting
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Management interface: HTTP."
::= { access 3 }
ip OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Management interface: IP address."
::= { access 4 }
mac OBJECT-TYPE
SYNTAX PhysAddressRaw
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Management interface: MAC address."
::= { access 5 }
managementVlan OBJECT-TYPE
SYNTAX OptionSetting
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Management interface: VLAN on/off."
::= { access 6 }
managementVlanId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Management interface: VLAN ID."
::= { access 7 }
wifiHAP OBJECT-TYPE
SYNTAX INTEGER {
na (0),
disabled (1),
enabled-on-air-link-loss (2),
force-enabled (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Management interface: WiFi Host Access Point."
::= { access 8 }
-- alarm mib
alarmTemperature OBJECT-TYPE
SYNTAX AlarmState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Temperature alarm state."
::= { alarm 1 }
alarmVoltageLow OBJECT-TYPE
SYNTAX AlarmState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Low voltage alarm state."
::= { alarm 2 }
alarmVoltageHigh OBJECT-TYPE
SYNTAX AlarmState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "High voltage alarm state."
::= { alarm 3 }
alarmRss OBJECT-TYPE
SYNTAX AlarmState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "RSS alarm state."
::= { alarm 4 }
alarmBer OBJECT-TYPE
SYNTAX AlarmState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "BER alarm state."
::= { alarm 6 }
alarmPeerDisconnected OBJECT-TYPE
SYNTAX AlarmState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Peer disconnect alarm state."
::= { alarm 7 }
alarmEth1Down OBJECT-TYPE
SYNTAX AlarmState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Ethernet 1 Link Down alarm state."
::= { alarm 8 }
alarmEth2Down OBJECT-TYPE
SYNTAX AlarmState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Ethernet 2 Link Down alarm state."
::= { alarm 9 }
alarmNetBitrate OBJECT-TYPE
SYNTAX AlarmState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Air Speed below Limit alarm state."
::= { alarm 11 }
alarmWifiOn OBJECT-TYPE
SYNTAX AlarmState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "WiFi Host Access Point on."
::= { alarm 12 }
alarmMse OBJECT-TYPE
SYNTAX AlarmState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "MSE alarm state."
::= { alarm 13 }
-- interface mib
ifRadio OBJECT IDENTIFIER ::= {interface 1}
ifEth OBJECT IDENTIFIER ::= {interface 2}
-- radio mib
rxChannel OBJECT-TYPE
SYNTAX DisplayStringRaw (SIZE(0..8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Receiver channel ID."
::= { ifRadio 1 }
txChannel OBJECT-TYPE
SYNTAX DisplayStringRaw (SIZE(0..8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Transceiver channel ID."
::= { ifRadio 2 }
rxFreq OBJECT-TYPE
SYNTAX Gauge32
UNITS "kHz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Receiver frequency in kHz."
::= { ifRadio 3 }
txFreq OBJECT-TYPE
SYNTAX Gauge32
UNITS "kHz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Transceiver frequency in kHz."
::= { ifRadio 4 }
rxModulation OBJECT-TYPE
SYNTAX DisplayStringRaw
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Rx modulation text ID."
::= { ifRadio 5 }
txModulation OBJECT-TYPE
SYNTAX DisplayStringRaw
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Tx modulation text ID."
::= { ifRadio 6 }
rxModulationIndex OBJECT-TYPE
SYNTAX ModulationList
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Rx modulation index."
::= { ifRadio 7 }
txModulationIndex OBJECT-TYPE
SYNTAX ModulationList
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Tx modulation index."
::= { ifRadio 8 }
matching OBJECT-TYPE
SYNTAX OptionSetting
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Channel matching."
::= { ifRadio 11 }
rfPowerConfigured OBJECT-TYPE
SYNTAX Integer32
UNITS "dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Configured RF Power in dBm."
::= { ifRadio 12 }
netBitrate OBJECT-TYPE
SYNTAX Integer32
UNITS "kbps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Current net bitrate in kbps."
::= { ifRadio 13 }
maxNetBitrate OBJECT-TYPE
SYNTAX Integer32
UNITS "Mbps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Maximum net bitrate in Mbps."
::= { ifRadio 14 }
txBandwidthKHz OBJECT-TYPE
SYNTAX Integer32
UNITS "kHz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Radio Tx channel bandwidth in kHz."
::= { ifRadio 15 }
channelArrangement OBJECT-TYPE
SYNTAX INTEGER {
na (0),
accp (1),
acap (2),
ccdp (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Channel arrangement."
::= { ifRadio 16 }
rfPowerCurrent OBJECT-TYPE
SYNTAX Integer32
UNITS "dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Current RF Power in dBm."
::= { ifRadio 17 }
acm OBJECT-TYPE
SYNTAX OptionSetting
MAX-ACCESS read-only
STATUS current
DESCRIPTION "ACM option."
::= { ifRadio 18 }
atpc OBJECT-TYPE
SYNTAX OptionSetting
MAX-ACCESS read-only
STATUS current
DESCRIPTION "ATPC option."
::= { ifRadio 19 }
frequencyTable OBJECT-TYPE
SYNTAX DisplayStringRaw (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Current frequency table name."
::= { ifRadio 20 }
rxBandwidthKHz OBJECT-TYPE
SYNTAX Integer32
UNITS "kHz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Radio Rx channel bandwidth in kHz."
::= { ifRadio 21 }
-- ifEth mib
ifEthTable OBJECT-TYPE
SYNTAX SEQUENCE OF IfEthEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "List of Ethernet interfaces."
::= { ifEth 1 }
ifEthEntry OBJECT-TYPE
SYNTAX IfEthEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Ethernet interface entry."
INDEX { speed }
::= { ifEthTable 1 }
IfEthEntry ::=
SEQUENCE {
speed Integer32,
duplex INTEGER,
mdix INTEGER,
autonego OptionSetting,
flowControl INTEGER
}
speed OBJECT-TYPE
SYNTAX Integer32(1..1000000000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Ethernet speed."
::= { ifEthEntry 1 }
duplex OBJECT-TYPE
SYNTAX INTEGER {
na (0),
full (1),
half (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Ethernet duplex."
::= { ifEthEntry 2 }
mdix OBJECT-TYPE
SYNTAX INTEGER {
na (0),
mdi (1),
mdi-x (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Ethernet MDI-X / MDI."
::= { ifEthEntry 3 }
autonego OBJECT-TYPE
SYNTAX OptionSetting
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Ethernet autonego."
::= { ifEthEntry 4 }
flowControl OBJECT-TYPE
SYNTAX INTEGER {
na (0),
off (1),
on (2),
auto (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Ethernet flow control."
::= { ifEthEntry 7 }
-- statistic mib
radio OBJECT IDENTIFIER ::= {statistic 2}
ethernet OBJECT IDENTIFIER ::= {statistic 3}
-- statistic radio mib
rss OBJECT-TYPE
SYNTAX Tenths (-1000..0)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Receiving RSS indicator in tenths of dBm."
::= { radio 1 }
timeAllConnect OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overall link uptime."
::= { radio 5 }
timeAllDisconnect OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overall link downtime."
::= { radio 6 }
timeMaxDisconnect OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The longest drop (disconnecting)."
::= { radio 7 }
numDisconnect OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of drops (disconnecting)."
::= { radio 8 }
reliability OBJECT-TYPE
SYNTAX Thousandths (0..100000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Reliability in thousandths of %."
::= { radio 9 }
linkUptime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Current radio link uptime."
::= { radio 10 }
ber OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Bit Error Rate (BER) multiplied by 10^9."
::= { radio 11 }
mse OBJECT-TYPE
SYNTAX Tenths (-500..0)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Receiving MSE indicator in thnths of dB."
::= { radio 12 }
-- statistic Ethernet mib
ethInThroughput OBJECT-TYPE
SYNTAX Integer32
UNITS "kbps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Input Ethernet 1 data port throughput in kbps."
::= { ethernet 1 }
ethOutThroughput OBJECT-TYPE
SYNTAX Integer32
UNITS "kbps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Output Ethernet 1 data port throughput in kbps."
::= { ethernet 2 }
eth2InThroughput OBJECT-TYPE
SYNTAX Integer32
UNITS "kbps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Input Ethernet 2 data port throughput in kbps."
::= { ethernet 3 }
eth2OutThroughput OBJECT-TYPE
SYNTAX Integer32
UNITS "kbps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Output Ethernet 2 data port throughput in kbps."
::= { ethernet 4 }
-- switch mib
egressQueue OBJECT IDENTIFIER ::= {switch 3}
-- switch egress mib
speedGuard OBJECT-TYPE
SYNTAX OptionSetting
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Speed guard feature on/off."
::= { egressQueue 2 }
-- RAy3 trap definitions
ray3TrapsPrefix OBJECT IDENTIFIER ::= { ray3Traps 0 }
tr3TemperatureAlarm NOTIFICATION-TYPE
OBJECTS { temperatureModem,
alarmTemperature }
STATUS current
DESCRIPTION
"Temperature exceeded the threshold."
::= { ray3TrapsPrefix 1 }
tr3VoltageLowAlarm NOTIFICATION-TYPE
OBJECTS { voltageUnit,
alarmVoltageLow }
STATUS current
DESCRIPTION
"Supply voltage below minimal threshold."
::= { ray3TrapsPrefix 2 }
tr3VoltageHighAlarm NOTIFICATION-TYPE
OBJECTS { voltageUnit,
alarmVoltageHigh }
STATUS current
DESCRIPTION
"Supply voltage above maximal threshold."
::= { ray3TrapsPrefix 3 }
tr3RssAlarm NOTIFICATION-TYPE
OBJECTS { rss,
alarmRss }
STATUS current
DESCRIPTION
"RSS exceeded the threshold."
::= { ray3TrapsPrefix 4 }
tr3MseAlarm NOTIFICATION-TYPE
OBJECTS { mse,
alarmMse }
STATUS current
DESCRIPTION
"MSE exceeded the threshold."
::= { ray3TrapsPrefix 5 }
tr3BerAlarm NOTIFICATION-TYPE
OBJECTS { ber,
alarmBer }
STATUS current
DESCRIPTION
"BER exceeded the threshold."
::= { ray3TrapsPrefix 6 }
tr3AirDisconnect NOTIFICATION-TYPE
OBJECTS { lineStatusII,
alarmPeerDisconnected }
STATUS current
DESCRIPTION
"Air line disconnected."
::= { ray3TrapsPrefix 7 }
tr3AirConnect NOTIFICATION-TYPE
OBJECTS { lineStatusII,
alarmPeerDisconnected }
STATUS current
DESCRIPTION
"Air line connected after being disconnected."
::= { ray3TrapsPrefix 8 }
tr3Eth1LinkDown NOTIFICATION-TYPE
OBJECTS { eth1Link,
alarmEth1Down }
STATUS current
DESCRIPTION
"Local station Ethernet 1 link Up/Down."
::= { ray3TrapsPrefix 9 }
tr3Eth21LinkDown NOTIFICATION-TYPE
OBJECTS { eth2Link,
alarmEth2Down }
STATUS current
DESCRIPTION
"Local station Ethernet 2 link Up/Down."
::= { ray3TrapsPrefix 10 }
tr3NetBitrate NOTIFICATION-TYPE
OBJECTS { netBitrate,
alarmNetBitrate }
STATUS current
DESCRIPTION
"Air speed below threshold."
::= { ray3TrapsPrefix 11 }
tr3WifiOn NOTIFICATION-TYPE
OBJECTS { wifiHAP,
alarmWifiOn }
STATUS current
DESCRIPTION
"WiFi Host Access Point is on."
::= { ray3TrapsPrefix 12 }
tr3EventAirCapacity NOTIFICATION-TYPE
OBJECTS { netBitrate }
STATUS current
DESCRIPTION
"Air channel capacity changed."
::= { ray3TrapsPrefix 101 }
END