david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
main
mibs/MIBS/riello/RIELLOUPS-MIB

1644 lines
48 KiB
Plaintext
Raw Permalink Normal View History

Initial commit
2023-12-05 12:25:34 +01:00
-- RPS S.p.A enterprise MIB definition
-- Copyright (c) RPS S.p.A.
-- Version: 1.0.3 by Michele Marcon
-- Date: 29.05.2017
-- Title: RIELLOUPS-MIB
-- RielloUPS-MIB { iso org(3) dod(6) internet(1) private(4)
-- enterprises(1) riello(5491) }
-- ************************************************************************
-- ************************************************************************
RIELLOUPS-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, NOTIFICATION-TYPE,
OBJECT-IDENTITY, Counter32, Gauge32, Integer32
FROM SNMPv2-SMI
DisplayString, TimeStamp, TimeInterval, TestAndIncr,
AutonomousType, TEXTUAL-CONVENTION
FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
Gauge, Counter
FROM RFC1155-SMI
OBJECT-TYPE
FROM RFC-1212
TRAP-TYPE
FROM RFC-1215
rielloMIB
FROM RIELLO-MIB;
rupsMIB OBJECT IDENTIFIER ::= { rielloMIB 10 }
PositiveInteger ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"This data type is a non-zero and non-negative value."
SYNTAX INTEGER (1..2147483647)
NonNegativeInteger ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"This data type is a non-negative value."
SYNTAX INTEGER (0..2147483647)
rupsObjects OBJECT IDENTIFIER ::= { rupsMIB 1 }
rupsIdent OBJECT IDENTIFIER ::= { rupsObjects 1 }
rupsIdentManufacturer OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The name of the UPS manufacturer."
::= { rupsIdent 1 }
rupsIdentModel OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The UPS Model designation."
::= { rupsIdent 2 }
rupsIdentUPSSoftwareVersion OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The UPS firmware/software version(s). This variable
may or may not have the same value as
upsIdentAgentSoftwareVersion in some implementations."
::= { rupsIdent 3 }
rupsIdentAgentSoftwareVersion OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The UPS agent software version. This variable may or
may not have the same value as
upsIdentUPSSoftwareVersion in some implementations."
::= { rupsIdent 4 }
rupsIdentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A string identifying the UPS. This object should be
set by the administrator."
::= { rupsIdent 5 }
rupsIdentAttachedDevices OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A string identifying the devices attached to the
output(s) of the UPS. This object should be set by
the administrator."
::= { rupsIdent 6 }
rupsIdentIOConfiguration OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The UPS IO configuration."
::= { rupsIdent 7 }
rupsIdentUpsType OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The UPS type."
::= { rupsIdent 8 }
rupsIdentNominalPowerVA OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The UPS nominal power VA."
::= { rupsIdent 9 }
rupsIdentNominalPowerW OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The UPS nominal power W."
::= { rupsIdent 10 }
rupsIdentBatteryVoltage OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The UPS nominal battery voltage."
::= { rupsIdent 11 }
rupsIdentBatteryCapacity OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The UPS nominal battery capacity."
::= { rupsIdent 12 }
rupsIdentOutputVoltage OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The UPS nominal output voltage."
::= { rupsIdent 13 }
rupsIdentOutputFrequency OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The UPS nominal output frequency."
::= { rupsIdent 14 }
rupsBattery OBJECT IDENTIFIER ::= { rupsObjects 2 }
rupsBatteryStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
batteryNormal(2),
batteryLow(3),
batteryDepleted(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The indication of the capacity remaining in the UPS
system's batteries. A value of batteryNormal
indicates that the remaining run-time is greater than
rupsConfigLowBattTime. A value of batteryLow indicates
that the remaining battery run-time is less than or
equal to rupsConfigLowBattTime. A value of
batteryDepleted indicates that the UPS will be unable
to sustain the present load when and if the utility
power is lost (including the possibility that the
utility power is currently absent and the UPS is
unable to sustain the output)."
::= { rupsBattery 1 }
rupsSecondsOnBattery OBJECT-TYPE
SYNTAX NonNegativeInteger -- UNITS seconds
ACCESS read-only
STATUS mandatory
DESCRIPTION
"If the unit is on battery power, the elapsed time
since the UPS last switched to battery power, or the
time since the network management subsystem was last
restarted, whichever is less. Zero shall be returned
if the unit is not on battery power."
::= { rupsBattery 2 }
rupsEstimatedMinutesRemaining OBJECT-TYPE
SYNTAX PositiveInteger -- UNITS minutes
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An estimate of the time to battery charge depletion
under the present load conditions if the utility power
is off and remains off, or if it were to be lost and
remain off."
::= { rupsBattery 3 }
rupsEstimatedChargeRemaining OBJECT-TYPE
SYNTAX INTEGER -- UNITS percent
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An estimate of the battery charge remaining expressed
as a percent of full charge."
::= { rupsBattery 4 }
rupsBatteryVoltage OBJECT-TYPE
SYNTAX NonNegativeInteger -- UNITS 0.1 Volt DC
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The magnitude of the present battery voltage."
::= { rupsBattery 5 }
rupsBatteryCurrent OBJECT-TYPE
SYNTAX INTEGER (-2147483648..2147483647) -- UNITS 0.1 Amp DC
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The present battery current."
::= { rupsBattery 6 }
rupsBatteryTemperature OBJECT-TYPE
SYNTAX INTEGER (-2147483648..2147483647) -- UNITS degrees Centigrade
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The ambient temperature at or near the UPS Battery
casing."
::= { rupsBattery 7 }
rupsBatteryPositiveVoltage OBJECT-TYPE
SYNTAX INTEGER (-2147483648..2147483647) -- UNITS V
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The UPS Battery positive voltage."
::= { rupsBattery 8 }
rupsBatteryNegativeVoltage OBJECT-TYPE
SYNTAX INTEGER (-2147483648..2147483647) -- UNITS V
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The UPS Battery negative voltage."
::= { rupsBattery 9 }
rupsBatteryPositiveCurrent OBJECT-TYPE
SYNTAX INTEGER (-2147483648..2147483647) -- UNITS 0.1 A
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The UPS Battery positive current."
::= { rupsBattery 10 }
rupsBatteryNegativeCurrent OBJECT-TYPE
SYNTAX INTEGER (-2147483648..2147483647) -- UNITS 0.1 A
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The UPS Battery positive current."
::= { rupsBattery 11 }
rupsIsCharging OBJECT-TYPE
SYNTAX INTEGER {
discharging(0),
charging(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The charging/discharging status of the battery"
::= { rupsBattery 12 }
rupsInput OBJECT IDENTIFIER ::= { rupsObjects 3 }
rupsInputLineBads OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A count of the number of times the input entered an
out-of-tolerance condition as defined by the
manufacturer. This count is incremented by one each
time the input transitions from zero out-of-tolerance
lines to one or more input lines out-of-tolerance."
::= { rupsInput 1 }
rupsInputNumLines OBJECT-TYPE
SYNTAX NonNegativeInteger
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of input lines utilized in this device.
This variable indicates the number of rows in the
input table."
::= { rupsInput 2 }
rupsInputTable OBJECT-TYPE
SYNTAX SEQUENCE OF RUpsInputEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of input table entries. The number of entries
is given by the value of upsInputNumLines."
::= { rupsInput 3 }
rupsInputEntry OBJECT-TYPE
SYNTAX RUpsInputEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry containing information applicable to a
particular input line."
INDEX { rupsInputLineIndex }
::= { rupsInputTable 1 }
RUpsInputEntry ::=
SEQUENCE {
rupsInputLineIndex
PositiveInteger,
rupsInputFrequency
NonNegativeInteger,
rupsInputVoltage
NonNegativeInteger,
rupsInputCurrent
NonNegativeInteger,
rupsInputTruePower
NonNegativeInteger
}
rupsInputLineIndex OBJECT-TYPE
SYNTAX PositiveInteger
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The input line identifier."
::= { rupsInputEntry 1 }
rupsInputFrequency OBJECT-TYPE
SYNTAX NonNegativeInteger -- UNITS 0.1 Hertz
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The present input frequency."
::= { rupsInputEntry 2 }
rupsInputVoltage OBJECT-TYPE
SYNTAX NonNegativeInteger -- UNITS RMS Volts
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The magnitude of the present input voltage."
::= { rupsInputEntry 3 }
rupsInputCurrent OBJECT-TYPE
SYNTAX NonNegativeInteger -- UNITS 0.1 RMS Amp
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The magnitude of the present input current."
::= { rupsInputEntry 4 }
rupsInputTruePower OBJECT-TYPE
SYNTAX NonNegativeInteger -- UNITS Watts
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The magnitude of the present input true power."
::= { rupsInputEntry 5 }
rupsOutput OBJECT IDENTIFIER ::= { rupsObjects 4 }
rupsOutputSource OBJECT-TYPE
SYNTAX INTEGER {
other(1),
none(2),
normal(3),
bypass(4),
battery(5),
booster(6),
reducer(7)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The present source of output power. The enumeration
none(2) indicates that there is no source of output
power (and therefore no output power), for example,
the system has opened the output breaker."
::= { rupsOutput 1 }
rupsOutputFrequency OBJECT-TYPE
SYNTAX NonNegativeInteger -- UNITS 0.1 Hertz
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The present output frequency."
::= { rupsOutput 2 }
rupsOutputNumLines OBJECT-TYPE
SYNTAX NonNegativeInteger
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of output lines utilized in this device.
This variable indicates the number of rows in the
output table."
::= { rupsOutput 3 }
rupsOutputTable OBJECT-TYPE
SYNTAX SEQUENCE OF RUpsOutputEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of output table entries. The number of
entries is given by the value of rupsOutputNumLines."
::= { rupsOutput 4 }
rupsOutputEntry OBJECT-TYPE
SYNTAX RUpsOutputEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry containing information applicable to a
particular output line."
INDEX { rupsOutputLineIndex }
::= { rupsOutputTable 1 }
RUpsOutputEntry ::=
SEQUENCE {
rupsOutputLineIndex
PositiveInteger,
rupsOutputVoltage
NonNegativeInteger,
rupsOutputCurrent
NonNegativeInteger,
rupsOutputPower
NonNegativeInteger,
rupsOutputPercentLoad
INTEGER,
rupsOutputPeakCurrent
NonNegativeInteger
}
rupsOutputLineIndex OBJECT-TYPE
SYNTAX PositiveInteger
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The output line identifier."
::= { rupsOutputEntry 1 }
rupsOutputVoltage OBJECT-TYPE
SYNTAX NonNegativeInteger -- UNITS RMS Volts
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The present output voltage."
::= { rupsOutputEntry 2 }
rupsOutputCurrent OBJECT-TYPE
SYNTAX NonNegativeInteger -- UNITS 0.1 RMS Amp
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The present output current."
::= { rupsOutputEntry 3 }
rupsOutputPower OBJECT-TYPE
SYNTAX NonNegativeInteger -- UNITS Watts
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The present output true power."
::= { rupsOutputEntry 4 }
rupsOutputPercentLoad OBJECT-TYPE
SYNTAX INTEGER -- UNITS percent
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The percentage of the UPS power capacity presently
being used on this output line, i.e., the greater of
the percent load of true power capacity and the
percent load of VA."
::= { rupsOutputEntry 5 }
rupsOutputPeakCurrent OBJECT-TYPE
SYNTAX NonNegativeInteger -- UNITS 0.1 RMS Amp
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The present output peak current."
::= { rupsOutputEntry 6 }
rupsBypass OBJECT IDENTIFIER ::= { rupsObjects 5 }
rupsBypassFrequency OBJECT-TYPE
SYNTAX NonNegativeInteger -- UNITS 0.1 Hertz
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The present bypass frequency."
::= { rupsBypass 1 }
rupsBypassNumLines OBJECT-TYPE
SYNTAX NonNegativeInteger
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of bypass lines utilized in this device.
This entry indicates the number of rows in the bypass
table."
::= { rupsBypass 2 }
rupsBypassTable OBJECT-TYPE
SYNTAX SEQUENCE OF RUpsBypassEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of bypass table entries. The number of
entries is given by the value of rupsBypassNumLines."
::= { rupsBypass 3 }
rupsBypassEntry OBJECT-TYPE
SYNTAX RUpsBypassEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry containing information applicable to a
particular bypass input."
INDEX { rupsBypassLineIndex }
::= { rupsBypassTable 1 }
RUpsBypassEntry ::=
SEQUENCE {
rupsBypassLineIndex
PositiveInteger,
rupsBypassVoltage
NonNegativeInteger,
rupsBypassCurrent
NonNegativeInteger,
rupsBypassPower
NonNegativeInteger
}
rupsBypassLineIndex OBJECT-TYPE
SYNTAX PositiveInteger
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The bypass line identifier."
::= { rupsBypassEntry 1 }
rupsBypassVoltage OBJECT-TYPE
SYNTAX NonNegativeInteger -- UNITS RMS Volts
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The present bypass voltage."
::= { rupsBypassEntry 2 }
rupsBypassCurrent OBJECT-TYPE
SYNTAX NonNegativeInteger -- UNITS 0.1 RMS Amp
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The present bypass current."
::= { rupsBypassEntry 3 }
rupsBypassPower OBJECT-TYPE
SYNTAX NonNegativeInteger -- UNITS Watts
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The present true power conveyed by the bypass."
::= { rupsBypassEntry 4 }
rupsAlarm OBJECT IDENTIFIER ::= { rupsObjects 6 }
rupsAlarmsPresent OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The present number of active alarm conditions."
::= { rupsAlarm 1 }
rupsAlarmTable OBJECT-TYPE
SYNTAX SEQUENCE OF RUpsAlarmEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of alarm table entries. The table contains
zero, one, or many rows at any moment, depending upon
the number of alarm conditions in effect. The table
is initially empty at agent startup. The agent
creates a row in the table each time a condition is
detected and deletes that row when that condition no
longer pertains. The agent creates the first row with
rupsAlarmId equal to 1, and increments the value of
rupsAlarmId each time a new row is created, wrapping to
the first free value greater than or equal to 1 when
the maximum value of rupsAlarmId would otherwise be
exceeded. Consequently, after multiple operations,
the table may become sparse, e.g., containing entries
for rows 95, 100, 101, and 203 and the entries should
not be assumed to be in chronological order because
rupsAlarmId might have wrapped.
Alarms are named by an AutonomousType (OBJECT
IDENTIFIER), rupsAlarmDescr, to allow a single table to
reflect well known alarms plus alarms defined by a
particular implementation, i.e., as documented in the
private enterprise MIB definition for the device. No
two rows will have the same value of rupsAlarmDescr,
since alarms define conditions. In order to meet this
requirement, care should be taken in the definition of
alarm conditions to insure that a system cannot enter
the same condition multiple times simultaneously.
The number of rows in the table at any given time is
reflected by the value of rupsAlarmsPresent."
::= { rupsAlarm 2 }
rupsAlarmEntry OBJECT-TYPE
SYNTAX RUpsAlarmEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry containing information applicable to a
particular alarm."
INDEX { rupsAlarmId }
::= { rupsAlarmTable 1 }
RUpsAlarmEntry ::=
SEQUENCE {
rupsAlarmId
PositiveInteger,
rupsAlarmDescr
OBJECT IDENTIFIER,
rupsAlarmTime
PositiveInteger
}
rupsAlarmId OBJECT-TYPE
SYNTAX PositiveInteger
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A unique identifier for an alarm condition. This
value must remain constant."
::= { rupsAlarmEntry 1 }
rupsAlarmDescr OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A reference to an alarm description object. The
object referenced should not be accessible, but rather
be used to provide a unique description of the alarm
condition."
::= { rupsAlarmEntry 2 }
rupsAlarmTime OBJECT-TYPE
SYNTAX PositiveInteger
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value of sysUpTime when the alarm condition was
detected. If the alarm condition was detected at the
time of agent startup and presumably existed before
agent startup, the value of rupsAlarmTime shall equal
0."
::= { rupsAlarmEntry 3 }
rupsWellKnownAlarms OBJECT IDENTIFIER ::= { rupsAlarm 3 }
rupsAlarmBatteryBad OBJECT IDENTIFIER ::= { rupsWellKnownAlarms 1 }
rupsAlarmOnBattery OBJECT IDENTIFIER ::= { rupsWellKnownAlarms 2 }
rupsAlarmLowBattery OBJECT IDENTIFIER ::= { rupsWellKnownAlarms 3 }
rupsAlarmShutdownImminent OBJECT IDENTIFIER ::= { rupsWellKnownAlarms 4 }
rupsAlarmTempBad OBJECT IDENTIFIER ::= { rupsWellKnownAlarms 5 }
rupsAlarmFault OBJECT IDENTIFIER ::= { rupsWellKnownAlarms 6 }
rupsAlarmInternal OBJECT IDENTIFIER ::= { rupsWellKnownAlarms 7 }
rupsAlarmOutputOverload OBJECT IDENTIFIER ::= { rupsWellKnownAlarms 8 }
rupsAlarmOnBypass OBJECT IDENTIFIER ::= { rupsWellKnownAlarms 9 }
rupsAlarmBypassBad OBJECT IDENTIFIER ::= { rupsWellKnownAlarms 10 }
rupsAlarmShutdownImminent OBJECT IDENTIFIER ::= { rupsWellKnownAlarms 11 }
--
-- The Test Group
--
rupsTest OBJECT IDENTIFIER ::= { rupsObjects 7 }
rupsTestId OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
ACCESS read-write
STATUS optional
DESCRIPTION
"The test is named by an OBJECT IDENTIFIER which
allows a standard mechanism for the initiation of
tests, including the well known tests identified in
this document as well as those introduced by a
particular implementation, i.e., as documented in the
private enterprise MIB definition for the device.
Setting this variable initiates the named test. Sets
to this variable require the presence of
upsTestSpinLock in the same SNMP message.
The set request will be rejected with an appropriate
error message if the requested test cannot be
performed, including attempts to start a test when
another test is already in progress. The status of
the current or last test is maintained in
upsTestResultsSummary. Tests in progress may be
aborted by setting the rupsTestId variable to
rupsTestAbortTestInProgress.
Read operations return the value of the name of the
test in progress if a test is in progress or the name
of the last test performed if no test is in progress,
unless no test has been run, in which case the well
known value upsTestNoTestsInitiated is returned."
::= { rupsTest 1 }
-- see [6] for more information on the semantics of objects with
-- syntax of TestAndIncr
rupsTestSpinLock OBJECT-TYPE
SYNTAX TestAndIncr
ACCESS read-write
STATUS optional
DESCRIPTION
"A spin lock on the test subsystem. The spinlock is
used as follows.
Before starting a test, a manager-station should make
sure that a test is not in progress as follows:
try_again:
get (upsTestSpinLock)
while (upsTestResultsSummary == inProgress) {
/* loop while a test is running for another
manager */
short delay
get (upsTestSpinLock)
}
lock_value = upsTestSpinLock
/* no test in progress, start the test */
set (upsTestSpinLock = lock_value, upsTestId =
requested_test)
if (error_index == 1) { /* (upsTestSpinLock
failed) */
/* if problem is not access control, then
some other manager slipped in ahead of us
*/
goto try_again
}
if (error_index == 2) { /* (upsTestId) */
/* cannot perform the test */
give up
}
/* test started ok */
/* wait for test completion by polling
upsTestResultsSummary */
get (upsTestSpinLock, upsTestResultsSummary,
upsTestResultsDetail)
while (upsTestResultsSummary == inProgress) {
short delay
get (upsTestSpinLock, upsTestResultsSummary,
upsTestResultsDetail)
}
/* when test completes, retrieve any additional
test results */
/* if upsTestSpinLock == lock_value + 1, then
these are our test */
/* results (as opposed to another manager's */
The initial value of upsTestSpinLock at agent
initialization shall
be 1."
::= { rupsTest 2 }
rupsTestResultsSummary OBJECT-TYPE
SYNTAX INTEGER {
donePass(1),
doneWarning(2),
doneError(3),
aborted(4),
inProgress(5),
noTestsInitiated(6)
}
ACCESS read-only
STATUS optional
DESCRIPTION
"The results of the current or last UPS diagnostics
test performed. The values for donePass(1),
doneWarning(2), and doneError(3) indicate that the
test completed either successfully, with a warning, or
with an error, respectively. The value aborted(4) is
returned for tests which are aborted by setting the
value of upsTestId to upsTestAbortTestInProgress.
Tests which have not yet concluded are indicated by
inProgress(5). The value noTestsInitiated(6)
indicates that no previous test results are available,
such as is the case when no tests have been run since
the last reinitialization of the network management
subsystem and the system has no provision for non-
volatile storage of test results."
::= { rupsTest 3 }
rupsTestResultsDetail OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS optional
DESCRIPTION
"Additional information about upsTestResultsSummary.
If no additional information available, a zero length
string is returned."
::= { rupsTest 4 }
rupsTestStartTime OBJECT-TYPE
SYNTAX TimeStamp
ACCESS read-only
STATUS optional
DESCRIPTION
"The value of sysUpTime at the time the test in
progress was initiated, or, if no test is in progress,
the time the previous test was initiated. If the
value of upsTestResultsSummary is noTestsInitiated(6),
upsTestStartTime has the value 0."
::= { rupsTest 5 }
rupsTestElapsedTime OBJECT-TYPE
SYNTAX TimeInterval
ACCESS read-only
STATUS optional
DESCRIPTION
"The amount of time, in TimeTicks, since the test in
progress was initiated, or, if no test is in progress,
the previous test took to complete. If the value of
upsTestResultsSummary is noTestsInitiated(6),
upsTestElapsedTime has the value 0."
::= { rupsTest 6 }
--
-- Well known tests.
--
rupsWellKnownTests OBJECT IDENTIFIER ::= { rupsTest 7 }
rupsTestNoTestsInitiated OBJECT IDENTIFIER
-- "No tests have been initiated and no test is in
-- progress."
::= { rupsWellKnownTests 1 }
rupsTestAbortTestInProgress OBJECT IDENTIFIER
-- "The test in progress is to be aborted / the test in
-- progress was aborted."
::= { rupsWellKnownTests 2 }
rupsTestGeneralSystemsTest OBJECT IDENTIFIER
-- "The manufacturer's standard test of UPS device
-- systems."
::= { rupsWellKnownTests 3 }
rupsTestQuickBatteryTest OBJECT IDENTIFIER
-- "A test that is sufficient to determine if the battery
-- needs replacement."
::= { rupsWellKnownTests 4 }
rupsTestDeepBatteryCalibration OBJECT IDENTIFIER
-- "The system is placed on battery to a discharge level,
-- set by the manufacturer, sufficient to determine
-- battery replacement and battery run-time with a high
-- degree of confidence. WARNING: this test will leave
-- the battery in a low charge state and will require
-- time for recharging to a level sufficient to provide
-- normal battery duration for the protected load."
::= { rupsWellKnownTests 5 }
rupsControl OBJECT IDENTIFIER ::= { rupsObjects 8 }
rupsShutdownType OBJECT-TYPE
SYNTAX INTEGER {
output(1),
system(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object determines the nature of the action to be
taken at the time when the countdown of the
upsShutdownAfterDelay and upsRebootWithDuration
objects reaches zero.
Setting this object to output(1) indicates that
shutdown requests should cause only the output of the
UPS to turn off. Setting this object to system(2)
indicates that shutdown requests will cause the entire
UPS system to turn off."
::= { rupsControl 1 }
rupsShutdownAfterDelay OBJECT-TYPE
SYNTAX INTEGER -- UNITS seconds
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Setting this object will shutdown (i.e., turn off)
either the UPS output or the UPS system (as determined
by the value of upsShutdownType at the time of
shutdown) after the indicated number of seconds, or
less if the UPS batteries become depleted. Setting
this object to 0 will cause the shutdown to occur
immediately. Setting this object to -1 will abort the
countdown. If the system is already in the desired
state at the time the countdown reaches 0, then
nothing will happen. That is, there is no additional
action at that time if upsShutdownType = system and
the system is already off. Similarly, there is no
additional action at that time if upsShutdownType =
output and the output is already off. When read,
upsShutdownAfterDelay will return the number of
seconds remaining until shutdown, or -1 if no shutdown
countdown is in effect. On some systems, if the agent
is restarted while a shutdown countdown is in effect,
the countdown may be aborted. Sets to this object
override any upsShutdownAfterDelay already in effect."
::= { rupsControl 2 }
rupsStartupAfterDelay OBJECT-TYPE
SYNTAX INTEGER -- UNITS seconds
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Setting this object will start the output after the
indicated number of seconds, including starting the
UPS, if necessary. Setting this object to 0 will
cause the startup to occur immediately. Setting this
object to -1 will abort the countdown. If the output
is already on at the time the countdown reaches 0,
then nothing will happen. Sets to this object
override the effect of any upsStartupAfterDelay
countdown or upsRebootWithDuration countdown in
progress. When read, upsStartupAfterDelay will return
the number of seconds until startup, or -1 if no
startup countdown is in effect. If the countdown
expires during a utility failure, the startup shall
not occur until the utility power is restored. On
some systems, if the agent is restarted while a
startup countdown is in effect, the countdown is
aborted."
::= { rupsControl 3 }
rupsRebootWithDuration OBJECT-TYPE
SYNTAX INTEGER -- UNITS seconds
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Setting this object will immediately shutdown (i.e.,
turn off) either the UPS output or the UPS system (as
determined by the value of upsShutdownType at the time
of shutdown) for a period equal to the indicated
number of seconds, after which time the output will be
started, including starting the UPS, if necessary. If
the number of seconds required to perform the request
is greater than the requested duration, then the
requested shutdown and startup cycle shall be
performed in the minimum time possible, but in no case
shall this require more than the requested duration
plus 60 seconds. When read, upsRebootWithDuration
shall return the number of seconds remaining in the
countdown, or -1 if no countdown is in progress. If
the startup should occur during a utility failure, the
startup shall not occur until the utility power is
restored."
::= { rupsControl 4 }
rupsAutoRestart OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Setting this object to 'on' will cause the UPS system
to restart after a shutdown if the shutdown occurred
during a power loss as a result of either a
upsShutdownAfterDelay or an internal battery depleted
condition. Setting this object to 'off' will prevent
the UPS system from restarting after a shutdown until
an operator manually or remotely explicitly restarts
it. If the UPS is in a startup or reboot countdown,
then the UPS will not restart until that delay has
been satisfied."
::= { rupsControl 5 }
rupsTemperature OBJECT IDENTIFIER ::= { rupsObjects 10 }
rupsSystemTemperature OBJECT-TYPE
SYNTAX INTEGER -- UNITS degree Celsius
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The present temperature."
::= { rupsTemperature 1 }
rupsPowerTemperature1 OBJECT-TYPE
SYNTAX INTEGER -- UNITS degree Celsius
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The present temperature."
::= { rupsTemperature 2 }
rupsPowerTemperature2 OBJECT-TYPE
SYNTAX INTEGER -- UNITS degree Celsius
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The present temperature."
::= { rupsTemperature 3 }
rupsPowerTemperature3 OBJECT-TYPE
SYNTAX INTEGER -- UNITS degree Celsius
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The present temperature."
::= { rupsTemperature 4 }
rupsChargerTemperature OBJECT-TYPE
SYNTAX INTEGER -- UNITS degree Celsius
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The present temperature."
::= { rupsTemperature 5 }
rupsBatteryPositiveTemperature OBJECT-TYPE
SYNTAX INTEGER -- UNITS degree Celsius
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The present temperature."
::= { rupsTemperature 6 }
rupsBatteryNegativeTemperature OBJECT-TYPE
SYNTAX INTEGER -- UNITS degree Celsius
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The present temperature."
::= { rupsTemperature 7 }
rupsBatteryExternalTemperature OBJECT-TYPE
SYNTAX INTEGER -- UNITS degree Celsius
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The present temperature."
::= { rupsTemperature 8 }
rupsMPS OBJECT IDENTIFIER ::= { rupsObjects 20 }
mpsAlarmGroupS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The alarm group s."
::= { rupsMPS 1 }
mpsAlarmGroupC OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The alarm group c."
::= { rupsMPS 2 }
mpsAlarmGroupB OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The alarm group b."
::= { rupsMPS 3 }
mpsAlarmGroupR OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The alarm group r."
::= { rupsMPS 4 }
mpsAlarmGroupRI OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The alarm group RI."
::= { rupsMPS 5 }
mpsAlarmGroupI OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The alarm group I."
::= { rupsMPS 6 }
mpsAlarmGroupA0 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The alarm group A0."
::= { rupsMPS 7 }
mpsAlarmGroupA1 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The alarm group A1."
::= { rupsMPS 8 }
mpsAlarmGroupA2 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The alarm group A2."
::= { rupsMPS 9 }
mpsAlarmGroupA3 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The alarm group A3."
::= { rupsMPS 10 }
mpsAlarmGroupA4 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The alarm group A4."
::= { rupsMPS 11 }
mpsAlarmGroupA5 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The alarm group A5."
::= { rupsMPS 12 }
rupsMST OBJECT IDENTIFIER ::= { rupsObjects 21 }
mstWarningGroupW0W1 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The anomaly group W0W1."
::= { rupsMST 1 }
mstAnomalyGroupA0A1 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The anomaly group A0A1."
::= { rupsMST 2 }
mstAnomalyGroupA2A3 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The anomaly group A2A3."
::= { rupsMST 3 }
mstAnomalyGroupA4A5 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The anomaly group A4A5."
::= { rupsMST 4 }
mstFaultGroupF0F1 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The fault group F0F1."
::= { rupsMST 5 }
mstFaultGroupF2F3 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The fault group F2F3."
::= { rupsMST 6 }
mstFaultGroupF4F5 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The fault group F4F5."
::= { rupsMST 7 }
mstLockGroupL0L1 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The lock group L0L1."
::= { rupsMST 8 }
mstLockGroupL2L3 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The lock group L2L3."
::= { rupsMST 9 }
mstLockGroupL4L5 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The lock group L4L5."
::= { rupsMST 10 }
mstEventGroupE0E1 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The event group E0E1."
::= { rupsMST 11 }
rupsMPW OBJECT IDENTIFIER ::= { rupsObjects 22 }
mpwSystemStatusGroup1 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The system status group 1."
::= { rupsMPW 1 }
mpwSystemStatusGroup2 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The system status group 2."
::= { rupsMPW 2 }
mpwSystemStatusGroup3 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The system status group 3."
::= { rupsMPW 3 }
mpwBypassModuleAlarmGroup OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The bypass module alarm group."
::= { rupsMPW 4 }
mpwPowerModule1AlarmGroup OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The power module 1 alarm group."
::= { rupsMPW 5 }
mpwPowerModule2AlarmGroup OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The power module 2 alarm group."
::= { rupsMPW 6 }
mpwPowerModule3AlarmGroup OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The power module 3 alarm group."
::= { rupsMPW 7 }
mpwPowerModule4AlarmGroup OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The power module 4 alarm group."
::= { rupsMPW 8 }
mpwPowerModule5AlarmGroup OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The power module 5 alarm group."
::= { rupsMPW 9 }
mpwPowerModule6AlarmGroup OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The power module 6 alarm group."
::= { rupsMPW 10 }
mpwPowerModule7AlarmGroup OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The power module 7 alarm group."
::= { rupsMPW 11 }
mpwBypassModuleStatus OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The bypass module status."
::= { rupsMPW 12 }
mpwPowerModule1Status OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The status of power module 1."
::= { rupsMPW 13 }
mpwPowerModule2Status OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The status of power module 2."
::= { rupsMPW 14 }
mpwPowerModule3Status OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The status of power module 3."
::= { rupsMPW 15 }
mpwPowerModule4Status OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The status of power module 4."
::= { rupsMPW 16 }
mpwPowerModule5Status OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The status of power module 5."
::= { rupsMPW 17 }
mpwPowerModule6Status OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The status of power module 6."
::= { rupsMPW 18 }
mpwPowerModule7Status OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The status of power module 7."
::= { rupsMPW 19 }
mpwControl OBJECT IDENTIFIER ::= { rupsMPW 20 }
mpwCommandCode OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Command code."
::= { mpwControl 1 }
mpwShutdownDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Shutdown delay."
::= { mpwControl 2 }
mpwRestoreDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Restore delay."
::= { mpwControl 3 }
mpwModuleApplyCommand OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Module apply command"
::= { mpwControl 4 }
mpwCommandResult OBJECT-TYPE
SYNTAX INTEGER -- UNITS RMS Volts
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Result of command."
::= { mpwControl 5 }
rupsTraps OBJECT IDENTIFIER ::= { rupsMIB 2 }
rupsTrapOnBattery TRAP-TYPE
ENTERPRISE rupsTraps
VARIABLES { rupsEstimatedMinutesRemaining, rupsSecondsOnBattery,
rupsConfigLowBattTime }
DESCRIPTION
"The UPS is operating on battery power. This trap is
persistent and is resent at one minute intervals until
the UPS either turns off or is no longer running on
battery."
::= 1
rupsTrapTestCompleted TRAP-TYPE
ENTERPRISE rupsTraps
DESCRIPTION
"This trap is sent upon completion of a UPS diagnostic
test."
::= 2
rupsTrapAlarmEntryAdded TRAP-TYPE
ENTERPRISE rupsTraps
DESCRIPTION
"This trap is sent each time an alarm is inserted into
to the alarm table. It is sent on the insertion of
all alarms except for rupsAlarmOnBattery and
rupsAlarmTestInProgress."
::= 3
rupsTrapAlarmEntryRemoved TRAP-TYPE
ENTERPRISE rupsTraps
DESCRIPTION
"This trap is sent each time an alarm is removed from
the alarm table. It is sent on the removal of all
alarms except for rupsAlarmTestInProgress."
::= 4
END
Reference in New Issue Copy Permalink