david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
main
mibs/MIBS/rittal/RITTAL-CMC-III-MIB

4288 lines
189 KiB
Plaintext
Raw Permalink Normal View History

Initial commit
2023-12-05 12:25:34 +01:00
-- ********************************************************************
-- RITTAL GmbH & Co. KG, Herborn
-- CMC-III-MIB Version 1.7
-- CMC-III-Processing Unit - 7030.000, 7030.010, 7030.020
-- PDU Metered/Managed/Switched - 7955.xxx
-- IoT Interface - 3124.300
--
-- Management Information Base for SNMP Network Management
--
-- Copyright 2018 Rittal Herborn.
-- All Rights Reserved.
--
-- The information in this document is subject to change without notice.
-- Refer to document "AGB_Software_Rittal.pdf"
--
-- ********************************************************************
-- File : $RCSfile: RITTAL-CMC-III-MIB.txt,v $
-- Rev. : $Revision: 1.7 $
-- Date : $Date: 2018/03/05 $
-- Author : $Author: fis $
-- Id : $Id: RITTAL-CMC-III-MIB.txt,v 1.6 2015/10/09 17:29:40 fis Exp $
-- ********************************************************************
RITTAL-CMC-III-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
NOTIFICATION-TYPE,
OBJECT-TYPE,
Integer32,
Unsigned32
FROM SNMPv2-SMI
MODULE-COMPLIANCE,
OBJECT-GROUP,
NOTIFICATION-GROUP
FROM SNMPv2-CONF
DisplayString
FROM SNMPv2-TC
sysObjectID
FROM SNMPv2-MIB
rittal
FROM RITTAL-SMI-MIB;
cmcIII MODULE-IDENTITY
LAST-UPDATED "201803050000Z"
ORGANIZATION "RITTAL GmbH & Co. KG"
CONTACT-INFO "www.rittal.de
RITTAL GmbH & Co. KG
Forschung & Entwicklung
Auf dem Stuetzelberg
D-35745 Herborn
Germany, Europe
+49(0)2772 5050
info@rittal.de."
DESCRIPTION "The MIB module for representing cmcIII SNMP agent."
REVISION "201803050000Z"
DESCRIPTION "enums added to cmcIIIVarType, enums added to cmcIIIUnitType."
REVISION "201708040000Z"
DESCRIPTION "cmcIIIModbusAccess, changed enums to 'readonly' and 'readwrite'.
'noaccess' and 'writeonly' no longer supported."
REVISION "201602020000Z"
DESCRIPTION "added new enums, fixed wrong descriptions."
REVISION "201510270000Z"
DESCRIPTION "added cmcIIIFiles, cmcIIIVarByTypeTable, cmcIIIVarIntDynTable, cmcIIIUnitLoadTable, cmcIIIUnitMode, cmcIIICapabilityRev,
and all members of cmcIIIRadiusMibGroup, cmcIIIWebCamMibGroup."
REVISION "201501230000Z"
DESCRIPTION "added new enums."
REVISION "201407100000Z"
DESCRIPTION "matching of SIZEs."
REVISION "201311100000Z"
DESCRIPTION "added cmcIIIDevAssembly."
REVISION "201305010000Z"
DESCRIPTION "extended cmcIIILdapMibGroup, added cmcIIIShutdownMibGroup, cmcIIIModbusMibGroup, cmcIIIDrcMibGroup, added OPC UA support."
REVISION "201208300000Z"
DESCRIPTION "modified object-grouping."
REVISION "201109020000Z"
DESCRIPTION "SMIv2 Version of cmcIII MIB."
REVISION "201104110000Z"
DESCRIPTION "Initial Version of cmcIII MIB."
-- ::= { iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) rittal(2606) 7 }
::= { rittal 7 }
-- *****************************************************************************
-- rittal OBJECT IDENTIFIER ::= { enterprises 2606 }
-- cmcIII OBJECT IDENTIFIER ::= { rittal 7 }
cmcIIINotifications OBJECT IDENTIFIER ::= { cmcIII 0 }
cmcIIIMibRev OBJECT IDENTIFIER ::= { cmcIII 1 }
cmcIIIUnit OBJECT IDENTIFIER ::= { cmcIII 2 }
cmcIIISetup OBJECT IDENTIFIER ::= { cmcIII 3 }
cmcIIISetupGeneral OBJECT IDENTIFIER ::= { cmcIIISetup 2 }
cmcIIISetupTimer OBJECT IDENTIFIER ::= { cmcIIISetup 3 }
cmcIIISetupTrap OBJECT IDENTIFIER ::= { cmcIIISetup 4 }
cmcIIISetupSMTP OBJECT IDENTIFIER ::= { cmcIIISetup 5 }
cmcIIISetupSMS OBJECT IDENTIFIER ::= { cmcIIISetup 6 }
cmcIIISetupSysLog OBJECT IDENTIFIER ::= { cmcIIISetup 7 }
cmcIIISetupNTP OBJECT IDENTIFIER ::= { cmcIIISetup 8 }
cmcIIISetupLDAP OBJECT IDENTIFIER ::= { cmcIIISetup 9 }
cmcIIISetupShutdown OBJECT IDENTIFIER ::= { cmcIIISetup 10 }
cmcIIISetupModbus OBJECT IDENTIFIER ::= { cmcIIISetup 11 }
cmcIIISetupRadius OBJECT IDENTIFIER ::= { cmcIIISetup 12 }
cmcIIISetupWebCam OBJECT IDENTIFIER ::= { cmcIIISetup 13 }
cmcIIIDevice OBJECT IDENTIFIER ::= { cmcIII 4 }
cmcIIIDevs OBJECT IDENTIFIER ::= { cmcIIIDevice 1 }
cmcIIIDevInfo OBJECT IDENTIFIER ::= { cmcIIIDevs 1 }
cmcIIIVars OBJECT IDENTIFIER ::= { cmcIIIDevice 2 }
cmcIIIVarInfo OBJECT IDENTIFIER ::= { cmcIIIVars 1 }
cmcIIIMsgs OBJECT IDENTIFIER ::= { cmcIIIDevice 3 }
cmcIIIMsgInfo OBJECT IDENTIFIER ::= { cmcIIIMsgs 1 }
cmcIIIDrcs OBJECT IDENTIFIER ::= { cmcIIIDevice 4 }
cmcIIIDrcInfo OBJECT IDENTIFIER ::= { cmcIIIDrcs 1 }
cmcIIIFiles OBJECT IDENTIFIER ::= { cmcIIIDevice 5 }
cmcIIIFileInfo OBJECT IDENTIFIER ::= { cmcIIIFiles 1 }
cmcIIIControl OBJECT IDENTIFIER ::= { cmcIII 5 }
-- cmcIIIExtAlarm OBJECT IDENTIFIER ::= { cmcIIIControl 4 }
cmcIIIConformance OBJECT IDENTIFIER ::= { cmcIII 6 }
cmcIIIMibCompliances OBJECT IDENTIFIER ::= { cmcIIIConformance 1 }
cmcIIIMibGroups OBJECT IDENTIFIER ::= { cmcIIIConformance 2 }
-- cmcIIIProducts OBJECT IDENTIFIER ::= { cmcIII 7 }
-- cmcIIICapability OBJECT IDENTIFIER ::= { cmcIII 8 }
-- cmcIIITraps OBJECT IDENTIFIER ::= { cmcIII 9 }
-- *****************************************************************************
-- CMC-III ComputerMultiControl DK7030.yyy --
-- *****************************************************************************
-- cmcIIIMibRev: --
cmcIIIMibMajRev OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The Major Revision level.
A change in the major revision level represents a major change
in the architecture of the MIB. A change in the major revision
level may indicate a significant change in the information,
correct interpretation of data may require a MIB document
with the same major revision level."
::= { cmcIIIMibRev 1 }
cmcIIIMibMinRev OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The Minor Revision level.
A change in the minor revision level may represent some minor
additional support, no changes to any pre-existing information
has occurred."
::= { cmcIIIMibRev 2 }
cmcIIIAgentRev OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The SNMP Agent Revision level."
::= { cmcIIIMibRev 3 }
cmcIIICapabilityRev OBJECT-TYPE
SYNTAX Unsigned32 (30000..39999)
-- = 3 (cmcIII) * 10000
-- + x (0 as default or cmcIIIUnitType * 1000 for specific hardware)
-- + cmcIIIMibMajRev
-- + cmcIIIMibMinRev
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This agents capabilities as used in RITTAL-CMC-III-CAPABILITY-MIB."
::= { cmcIIIMibRev 4 }
-- =============================================================================
-- cmcIIIUnit: --
cmcIIIUnitStatus OBJECT-TYPE
SYNTAX INTEGER {
ok (1),
failed (2),
overload (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "General Status of CMCIII PU unit itself
(1) OK
(2) failed
(3) overload (current too high)."
::= { cmcIIIUnit 1 }
cmcIIIUnitURL OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..30))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "URL of CMCIII PU."
::= { cmcIIIUnit 2 }
cmcIIIUnitHWRev OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..24))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Hardware Revision of CMCIII PU."
::= { cmcIIIUnit 3 }
cmcIIIUnitFWRev OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..24))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Firmware Revision of CMCIII PU."
::= { cmcIIIUnit 4 }
cmcIIIUnitOSRev OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Linux Revision of CMCIII PU."
::= { cmcIIIUnit 5 }
cmcIIIUnitSerial OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..10))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Serial Number of CMCIII PU."
::= { cmcIIIUnit 6 }
cmcIIIUnitProd OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..24))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Production Code of CMCIII PU."
::= { cmcIIIUnit 7 }
cmcIIIUnitType OBJECT-TYPE
SYNTAX INTEGER {
unknown (1),
pu (2),
compact (3),
lcp (4),
pdu (5),
rms (6),
mcs (7),
iot (8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Type of CMCIII
(1) Unit unknown
(2) Processing Unit
(3) Processing Unit Compact
(4) LCP
(5) PDU
(6) RiMatrix S."
::= { cmcIIIUnit 8 }
cmcIIIUnitCurrentSource OBJECT-TYPE
SYNTAX INTEGER {
unknown (1),
acAdapter (2),
terminalStrip (3),
poe (4),
usb (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Current source of CMCIII PU
(1) unknown
(2) AC Adapter Power Supply
(3) Terminal Strip
(4) poe: Power Over Ethernet
(5) usb: Universal Serial Bus."
::= { cmcIIIUnit 9 }
cmcIIICan0CurrentConsumption OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Maximal current consumption required by CANopen fieldbus 1."
::= { cmcIIIUnit 10 }
cmcIIICan1CurrentConsumption OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Maximal current consumption required by CANopen fieldbus 2."
::= { cmcIIIUnit 11 }
cmcIIIUnitUpTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Operating time of CMCIII PU in seconds since an epoch."
::= { cmcIIIUnit 12 }
cmcIIIUnitMode OBJECT-TYPE
SYNTAX INTEGER {
localInit (1),
start (2),
pwrDelay (3),
restartBus (4),
localOnline (5),
collectSlaves (6),
reorganizeBus (7),
online (8),
prepareUpgrade (9),
upgradeSensor (10),
terminate (11)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Current status mode of CMCIII PU and all subsystems
(1) local init ini progress
(2) start local system first time
(3) first start delay
(4) restart bus system, reread configuration
(5) locally online
(6) collect all slaves at the bus
(7) reorganize bus
(8) up and running
(9) prepare for sensor upgrade
(10) upgrade sensors
(11) gentle termination."
::= { cmcIIIUnit 13 }
cmcIIIUnitLoadTable OBJECT-TYPE
SYNTAX SEQUENCE OF CmcIIIUnitLoadEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A list of system load entries."
::= { cmcIIIUnit 14 }
cmcIIIUnitLoadEntry OBJECT-TYPE
SYNTAX CmcIIIUnitLoadEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entries of system load table."
INDEX { cmcIIIUnitLoadIndex }
::= { cmcIIIUnitLoadTable 1 }
CmcIIIUnitLoadEntry ::= SEQUENCE {
cmcIIIUnitLoadIndex Unsigned32,
cmcIIIUnitLoadAverage Unsigned32
}
cmcIIIUnitLoadIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..10)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index for the system load table.
These are the past minutes the load is given for."
::= { cmcIIIUnitLoadEntry 1 }
cmcIIIUnitLoadAverage OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "System load average multiplied by 100."
::= { cmcIIIUnitLoadEntry 2 }
-- =============================================================================
-- cmcIIISetup: --
cmcIIILastChangeSetup OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Last change of configuration
according to operating time cmcIIIUnitUpTime."
::= { cmcIIISetup 1 }
-- cmcIIISetupGeneral: --
cmcIIISetTempUnit OBJECT-TYPE
SYNTAX INTEGER {
celsius (1),
fahrenheit (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Unit of all temperature values and setpoints."
DEFVAL { celsius }
::= { cmcIIISetupGeneral 1 }
cmcIIISetBeeper OBJECT-TYPE
SYNTAX INTEGER {
off (1),
on (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Audible alarm in CMCIII unit:
(1) beeper is off (general)
(2) beeper is on."
DEFVAL { off }
::= { cmcIIISetupGeneral 2 }
cmcIIIQuitRelay OBJECT-TYPE
SYNTAX INTEGER {
disabled (1),
enabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable or disable acknowledging currently active alarm relay
(with 'C' on CMCIII)."
DEFVAL { disabled }
::= { cmcIIISetupGeneral 3 }
cmcIIILogicRelay OBJECT-TYPE
SYNTAX INTEGER {
closeAtAlarm (1),
openAtAlarm (2),
disabled (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Logic of alarm relay:
(1) Relay will pick up in case of an alarm
(2) Relay will release in case of an alarm
(3) Relay disabled."
DEFVAL { closeAtAlarm }
::= { cmcIIISetupGeneral 4 }
cmcIIIUnitMsgRelay OBJECT-TYPE
SYNTAX INTEGER {
disabled (1),
enabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Alarm relay in case of Device Messages (detect, lost, changed..):
(1) Relay disabled, relay will not switch in case of a device message
(2) Relay enabled, relay will switch in case of a unit message."
DEFVAL { disabled }
::= { cmcIIISetupGeneral 5 }
cmcIIIFunctionRelay OBJECT-TYPE
SYNTAX INTEGER {
warningOnly (1),
alarmOnly (2),
warningOrAlarm (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Logic of alarm relay:
(1) Relay will switch in case of a warning only
(2) Relay will switch in case of an alarm only
(3) Relay will switch in case of an alarm or warning."
DEFVAL { warningOnly }
::= { cmcIIISetupGeneral 6 }
cmcIIITimeZone OBJECT-TYPE
SYNTAX Integer32 (0..74)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Time Zone
0 : (GMT-12:00) International Date Line West
1 : (GMT-11:00) Midway Island, Samoa
2 : (GMT-10:00) Hawaii
3 : (GMT-09:00) Alaska
4 : (GMT-08:00) Pacific Time (US and Canada), Tijuana
5 : (GMT-07:00) Arizona
6 : (GMT-07:00) Chihuahua, La Paz, Mazatlan
7 : (GMT-07:00) Mountain Time (US & Canada)
8 : (GMT-06:00) Central America
9 : (GMT-06:00) Central Time (US and Canada)
10 : (GMT-06:00) Guadalajara, Mexico City, Monterrey
11 : (GMT-06:00) Saskatchewan
12 : (GMT-05:00) Bogota, Lima, Quito
13 : (GMT-05:00) Eastern Time (Us and Canada)
14 : (GMT-05:00) Indiana (East)
15 : (GMT-04:00) Atlantic Time (Canada)
16 : (GMT-04:00) Caracas, La Paz
17 : (GMT-04:00) Santiago
18 : (GMT-03:30) Newfoundland
19 : (GMT-03:00) Brasilia
20 : (GMT-03:00) Buenos Aires, Georgetown
21 : (GMT-03:00) Greenland
22 : (GMT-02:00) Mid-Atlantic
23 : (GMT-01:00) Azores
24 : (GMT-01:00) Cape Verde Is.
25 : (GMT) Casablanca, Monrovia
26 : (GMT) Greenwich Mean Time : Dublin, Lisbon, London
27 : (GMT+01:00) Amsterdam, Berlin, Bern, Rome, Vienna
28 : (GMT+01:00) Belgrade, Bratislava, Budapest, Prague
29 : (GMT+01:00) Brussels, Copenhagen, Madrid, Paris
30 : (GMT+01:00) Sarajevo, Skopje, Warsaw, Zagreb
31 : (GMT+01:00) West Central Africa
32 : (GMT+02:00) Athens, Istanbul, Minsk
33 : (GMT+02:00) Bucharest
34 : (GMT+02:00) Harare, Pretoria
35 : (GMT+02:00) Helsinki, Kyiv, Sofia
36 : (GMT+02:00) Riga, Tallinn, Vilnius
37 : (GMT+02:00) Jerusalem
38 : (GMT+03:00) Baghdad
39 : (GMT+03:00) Kuwait, Riyadh
40 : (GMT+03:00) Moscow, St. Petersburg, Volgograd
41 : (GMT+03:00) Nairobi
42 : (GMT+03:30) Tehran
43 : (GMT+04:00) Abu Dhabi, Muscat
44 : (GMT+04:00) Baku, Tbilisi, Yerevan
45 : (GMT+04:30) Kabul
46 : (GMT+05:00) Ekaterinburg
47 : (GMT+05:00) Islamabad, Karachi, Tashkent
48 : (GMT+05:30) Chennai, Kolkata, Mumbai, New Delhi
49 : (GMT+05:45) Kathmandu
50 : (GMT+06:00) Almaty, Novosibirsk
51 : (GMT+06:00) Astana, Dhaka
52 : (GMT+06:00) Sri Jayawardenepura
53 : (GMT+06:30) Rangoon
54 : (GMT+07:00) Bangkok, Hanoi, Jakarta
55 : (GMT+07:00) Krasnoyarsk
56 : (GMT+08:00) Beijing, Chongqing, Hong Kong, Urumqi
57 : (GMT+08:00) Irkutsk, Ulaan Bataar
58 : (GMT+08:00) Kuala Lumpur, Singapore
59 : (GMT+08:00) Perth
60 : (GMT+08:00) Taipei
61 : (GMT+09:00) Osaka, Sapporo, Tokyo
62 : (GMT+09:00) Seoul
63 : (GMT+09:00) Yakutsk
64 : (GMT+09:30) Adelaide
65 : (GMT+09:30) Darwin
66 : (GMT+10:00) Brisbane
67 : (GMT+10:00) Canberra, Melbourne, Sydney
68 : (GMT+10:00) Guam, Port Moresby
69 : (GMT+10:00) Hobart
70 : (GMT+10:00) Vladivostok
71 : (GMT+11:00) Magadan, Solomon Is., New Caledonia
72 : (GMT+12:00) Auckland, Wellington
73 : (GMT+12:00) Fiji, Kamchatka, Marshall Is.
74 : (GMT+13:00) Nukualofa."
DEFVAL { 27 }
::= { cmcIIISetupGeneral 7 }
cmcIIISetupDate OBJECT-TYPE
SYNTAX DisplayString (SIZE (10..10))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Actual date in format DD.MM.YYYY
Use UTC date to set date."
::= { cmcIIISetupGeneral 8 }
cmcIIISetupTime OBJECT-TYPE
SYNTAX DisplayString (SIZE (8..8))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Actual time in format HH:MM:SS, HH (0-23), MM (0-59), SS (0-59).
Use UTC time to set time."
::= { cmcIIISetupGeneral 9 }
cmcIIIWebAccess OBJECT-TYPE
SYNTAX BITS {
httpEnabled (0),
httpsEnabled (1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Web access status:
(0) httpEnabled : http protocol is enabled
(1) httpsEnabled : https protocol is enabled."
DEFVAL { { httpEnabled, httpsEnabled } }
::= { cmcIIISetupGeneral 10 }
cmcIIIHttpPort OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "TCP/IP port of HTTP daemon."
DEFVAL { 80 }
::= { cmcIIISetupGeneral 11 }
cmcIIIHttpsPort OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "TCP/IP port of HTTPS daemon."
DEFVAL { 443 }
::= { cmcIIISetupGeneral 12 }
cmcIIIFtpAccess OBJECT-TYPE
SYNTAX INTEGER {
disabled (1),
enabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Ftp access:
(1) disabled
(2) enabled."
DEFVAL { enabled }
::= { cmcIIISetupGeneral 13 }
cmcIIIFtpPort OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "TCP/IP port of FTP daemon."
DEFVAL { 21 }
::= { cmcIIISetupGeneral 14 }
cmcIIISshAccess OBJECT-TYPE
SYNTAX INTEGER {
disabled (1),
enabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Ssh access:
(1) disabled
(2) enabled."
DEFVAL { enabled }
::= { cmcIIISetupGeneral 15 }
cmcIIISshPort OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "TCP/IP port of SSH daemon."
DEFVAL { 22 }
::= { cmcIIISetupGeneral 16 }
cmcIIITelnetAccess OBJECT-TYPE
SYNTAX INTEGER {
disabled (1),
enabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Telnet access:
(1) disabled
(2) enabled."
DEFVAL { enabled }
::= { cmcIIISetupGeneral 17 }
cmcIIITelnetPort OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "TCP/IP port of telnet daemon."
DEFVAL { 23 }
::= { cmcIIISetupGeneral 18 }
cmcIIILanguage OBJECT-TYPE
SYNTAX INTEGER {
english (1),
german (2),
french (3),
spanish (4),
portuguese (5),
russian (6),
chinese (7),
japanese (8)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Language:
(1) English.
(2) German,
(3) French,
(4) Spanish,
(5) Portuguese,
(6) Russian,
(7) Chinese
(8) Japanese."
DEFVAL { english }
::= { cmcIIISetupGeneral 19 }
cmcIIIOpcUaAccess OBJECT-TYPE
SYNTAX INTEGER {
disabled (1),
enabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "OPC UA access:
(1) disabled
(2) enabled."
DEFVAL { disabled }
::= { cmcIIISetupGeneral 20 }
cmcIIIOpcUaPort OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "TCP/IP port of OPC UA daemon."
DEFVAL { 4840 }
::= { cmcIIISetupGeneral 21 }
-- cmcIIISetupTimer: --
cmcIIINumberOfTimers OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of value table entries=number of outlets available on this unit."
::= { cmcIIISetupTimer 1 }
cmcIIITimerTable OBJECT-TYPE
SYNTAX SEQUENCE OF CmcIIITimerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Headline of Timer Table."
::= { cmcIIISetupTimer 2 }
cmcIIITimerEntry OBJECT-TYPE
SYNTAX CmcIIITimerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entries of Timer Table."
INDEX { cmcIIITimerIndex }
::= { cmcIIITimerTable 1 }
CmcIIITimerEntry ::=
SEQUENCE {
cmcIIITimerIndex Unsigned32,
cmcIIITimerStatus INTEGER,
cmcIIITimerDayOfWeek INTEGER,
cmcIIITimeOn DisplayString,
cmcIIITimeOff DisplayString,
cmcIIITimeControl INTEGER,
cmcIIITimerFunction INTEGER
}
cmcIIITimerIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index for the list of timer entries. Its value ranges
between 1 and the value of cmcIIINumberOfTimers."
::= { cmcIIITimerEntry 1 }
cmcIIITimerStatus OBJECT-TYPE
SYNTAX INTEGER {
switchedOff (1),
switchedOn (2),
noTime (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Actual status of the timer."
::= { cmcIIITimerEntry 2 }
cmcIIITimerDayOfWeek OBJECT-TYPE
SYNTAX INTEGER {
sun (1),
mon (2),
tue (3),
wed (4),
thu (5),
fri (6),
sat (7),
sat2sun (8),
mon2fri (9),
mon2sun (10)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Selection of day of week for timer to switch."
::= { cmcIIITimerEntry 3 }
cmcIIITimeOn OBJECT-TYPE
SYNTAX DisplayString (SIZE (5..5))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Time to switch on current function, Format: HH:MM."
::= { cmcIIITimerEntry 4 }
cmcIIITimeOff OBJECT-TYPE
SYNTAX DisplayString (SIZE (5..5))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Time to switch off current function, Format: HH:MM."
::= { cmcIIITimerEntry 5 }
cmcIIITimeControl OBJECT-TYPE
SYNTAX INTEGER {
disabled (1),
enabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Control via RTC."
::= { cmcIIITimerEntry 6 }
cmcIIITimerFunction OBJECT-TYPE
SYNTAX INTEGER {
disKeypads (1),
unlDoors (2),
disTrapRec1 (3),
disTrapRec2 (4),
disTrapRec3 (5),
disTrapRec4 (6),
disSMS1 (7),
disSMS2 (8),
disSMS3 (9),
disSMS4 (10),
schedule1 (11),
schedule2 (12),
schedule3 (13),
schedule4 (14),
schedule5 (15),
schedule6 (16),
schedule7 (17),
schedule8 (18)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Function which is controlled via timer
1: Unlock of doors via keypad is disabled
2: Doors will be unlocked
3-6: sending traps to this trap receiver will be disabled
7-10: sending SMS to phone number 1..4 will be disabled
11-18: Scheduled alarm off."
::= { cmcIIITimerEntry 7 }
-- cmcIIISetupTrapReceiver: --
cmcIIINumberOfTrapReceivers OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of TrapReceiverTable entries. The number of trap receivers."
::= { cmcIIISetupTrap 1 }
cmcIIITrapReceiverTable OBJECT-TYPE
SYNTAX SEQUENCE OF CmcIIITrapReceiverEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A list of trap receiver entries."
::= { cmcIIISetupTrap 2 }
cmcIIITrapReceiverEntry OBJECT-TYPE
SYNTAX CmcIIITrapReceiverEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entries of trapTable."
INDEX { cmcIIITrapReceiverIndex }
::= { cmcIIITrapReceiverTable 1 }
CmcIIITrapReceiverEntry ::=
SEQUENCE {
cmcIIITrapReceiverIndex Unsigned32,
cmcIIITrapReceiverStatus INTEGER,
cmcIIITrapReceiverIpAddress DisplayString
}
cmcIIITrapReceiverIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index for the trap receiver table. Its value ranges between
1 and the value of NumberOfTrapReceivers."
::= { cmcIIITrapReceiverEntry 1 }
cmcIIITrapReceiverStatus OBJECT-TYPE
SYNTAX INTEGER {
disabled (1),
snmpv1Trap (2),
snmpv2cTrap (3),
snmpv2cInform (4),
snmpv3Trap (5),
snmpv3Inform (6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable SNMP version and trap/inform type or disable trap receiver.
Enumeration type snmpv3Inform(6) is not yet supported."
DEFVAL { snmpv1Trap }
::= { cmcIIITrapReceiverEntry 2 }
cmcIIITrapReceiverIpAddress OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "IP address of trap receiver."
::= { cmcIIITrapReceiverEntry 3 }
-- cmcIIISetupSMTP: --
cmcIIISmtpStatus OBJECT-TYPE
SYNTAX INTEGER {
disabled (1),
enabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SMTP (email) usage:
(1) disabled
(2) enabled."
DEFVAL { disabled }
::= { cmcIIISetupSMTP 1 }
cmcIIISmtpServer OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "IP address of SMTP server."
::= { cmcIIISetupSMTP 2 }
cmcIIISmtpPort OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "TCP/IP port of SMTP server."
DEFVAL { 25 }
::= { cmcIIISetupSMTP 3 }
cmcIIISmtpAuth OBJECT-TYPE
SYNTAX INTEGER {
disabled (1),
enabled (2),
enabledTls (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SMTP authentication usage:
(1) disabled
(2) enabled
(3) enabled with TLS support."
DEFVAL { disabled }
::= { cmcIIISetupSMTP 4 }
cmcIIISmtpUsername OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..50))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Username required to authenticate at the SMTP server."
::= { cmcIIISetupSMTP 5 }
cmcIIISmtpPassword OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..50))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Password required to authenticate at the SMTP server."
::= { cmcIIISetupSMTP 6 }
cmcIIISmtpSender OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..50))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Sender address (FROM:) of the SMTP message."
::= { cmcIIISetupSMTP 7 }
cmcIIISmtpReply OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..50))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Reply address (REPLY:) of the SMTP message."
::= { cmcIIISetupSMTP 8 }
cmcIIINumberOfSmtpReceivers OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of SmtpReceiverTable entries. The number of SMTP receivers."
::= { cmcIIISetupSMTP 9 }
cmcIIISmtpReceiverTable OBJECT-TYPE
SYNTAX SEQUENCE OF CmcIIISmtpReceiverEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A list of SMTP receiver entries."
::= { cmcIIISetupSMTP 10 }
cmcIIISmtpReceiverEntry OBJECT-TYPE
SYNTAX CmcIIISmtpReceiverEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entries of SMTPTable."
INDEX { cmcIIISmtpReceiverIndex }
::= { cmcIIISmtpReceiverTable 1 }
CmcIIISmtpReceiverEntry ::=
SEQUENCE {
cmcIIISmtpReceiverIndex Unsigned32,
cmcIIISmtpReceiverStatus INTEGER,
cmcIIISmtpReceiverAddress DisplayString
}
cmcIIISmtpReceiverIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index for the SMTP receiver table. Its value ranges between
1 and the value of NumberOfSmtpReceivers."
::= { cmcIIISmtpReceiverEntry 1 }
cmcIIISmtpReceiverStatus OBJECT-TYPE
SYNTAX INTEGER {
disabled (1),
enabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable or disable SMTP receiver."
DEFVAL { disabled }
::= { cmcIIISmtpReceiverEntry 2 }
cmcIIISmtpReceiverAddress OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..50))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "IP address of SMTP receiver."
::= { cmcIIISmtpReceiverEntry 3 }
-- cmcIIISetupSMS: --
cmcIIISmsStatus OBJECT-TYPE
SYNTAX INTEGER {
disabled (1),
enabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SMS usage:
(1) disabled
(2) enabled."
DEFVAL { disabled }
::= { cmcIIISetupSMS 1 }
cmcIIISmsPIN OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..10))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SMS PIN number."
::= { cmcIIISetupSMS 2 }
cmcIIISmsService OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..30))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SMS service number."
::= { cmcIIISetupSMS 3 }
cmcIIISmsMSN OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..30))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SMS MSN for ISDN."
::= { cmcIIISetupSMS 4 }
cmcIIISmsPreDial OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..2))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SMS PreDial number."
::= { cmcIIISetupSMS 5 }
cmcIIINumberOfSmsReceivers OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of SmsReceiverTable entries. The number of SMS receivers."
::= { cmcIIISetupSMS 6 }
cmcIIISmsReceiverTable OBJECT-TYPE
SYNTAX SEQUENCE OF CmcIIISmsReceiverEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A list of SMS receiver entries."
::= { cmcIIISetupSMS 7 }
cmcIIISmsReceiverEntry OBJECT-TYPE
SYNTAX CmcIIISmsReceiverEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entries of SMSTable."
INDEX { cmcIIISmsReceiverIndex }
::= { cmcIIISmsReceiverTable 1 }
CmcIIISmsReceiverEntry ::=
SEQUENCE {
cmcIIISmsReceiverIndex Unsigned32,
cmcIIISmsReceiverStatus INTEGER,
cmcIIISmsReceiverNumber DisplayString
}
cmcIIISmsReceiverIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index for the SMS receiver table. Its value ranges between
1 and the value of NumberOfSmsReceivers."
::= { cmcIIISmsReceiverEntry 1 }
cmcIIISmsReceiverStatus OBJECT-TYPE
SYNTAX INTEGER {
disabled (1),
enabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable or disable SMS receiver."
DEFVAL { disabled }
::= { cmcIIISmsReceiverEntry 2 }
cmcIIISmsReceiverNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..30))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Phone number of SMS receiver."
::= { cmcIIISmsReceiverEntry 3 }
-- cmcIIISetupSysLog: --
cmcIIISysLogStatus OBJECT-TYPE
SYNTAX INTEGER {
disabled (1),
enabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SysLog usage:
(1) disabled
(2) enabled."
DEFVAL { disabled }
::= { cmcIIISetupSysLog 1 }
cmcIIISysLogFacility OBJECT-TYPE
SYNTAX INTEGER {
local0 (1),
local1 (2),
local2 (3),
local3 (4),
local4 (5),
local5 (6),
local6 (7),
local7 (8)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SysLog facility local0..7."
DEFVAL { local0 }
::= { cmcIIISetupSysLog 2 }
cmcIIISysLogServer1 OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "IP address of first SysLog server."
::= { cmcIIISetupSysLog 3 }
cmcIIISysLogServer2 OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "IP address of second SysLog server."
::= { cmcIIISetupSysLog 4 }
-- cmcIIISetupNTP: --
cmcIIINtpStatus OBJECT-TYPE
SYNTAX INTEGER {
disabled (1),
enabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "NTP usage:
(1) disabled
(2) enabled."
DEFVAL { disabled }
::= { cmcIIISetupNTP 1 }
cmcIIINtpTimeZone OBJECT-TYPE
SYNTAX Integer32 (0..74)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "NTP time zone, see cmcIIITimeZone for valid time zones."
DEFVAL { 27 }
::= { cmcIIISetupNTP 2 }
cmcIIINtpServer1 OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "IP address of first NTP server."
::= { cmcIIISetupNTP 3 }
cmcIIINtpServer2 OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "IP address of second NTP server."
::= { cmcIIISetupNTP 4 }
-- cmcIIISetupLDAP: --
cmcIIILdapStatus OBJECT-TYPE
SYNTAX INTEGER {
disabled (1),
enabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "LDAP usage:
(1) disabled
(2) enabled."
DEFVAL { disabled }
::= { cmcIIISetupLDAP 1 }
cmcIIILdapServer OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "IP address of LDAP server."
::= { cmcIIISetupLDAP 2 }
cmcIIILdapBindDN OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..100))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "LDAP user name."
::= { cmcIIISetupLDAP 3 }
cmcIIILdapBindPW OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "LDAP user password."
::= { cmcIIISetupLDAP 4 }
cmcIIILdapUserBase OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "LDAP base user."
::= { cmcIIISetupLDAP 5 }
cmcIIILdapUserSearch OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..200))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "LDAP searchpath user."
::= { cmcIIISetupLDAP 6 }
cmcIIILdapUserAttrib OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "LDAP attribute user."
::= { cmcIIISetupLDAP 7 }
cmcIIILdapGroupBase OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "LDAP base group."
::= { cmcIIISetupLDAP 8 }
cmcIIILdapGroupSearch OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..200))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "LDAP searchpath group."
::= { cmcIIISetupLDAP 9 }
cmcIIILdapGroupAttrib OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "LDAP attribute group."
::= { cmcIIISetupLDAP 10 }
-- cmcIIIShutdown: --
cmcIIINumberOfShutdowns OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of cmcIIIShutdownTable entries. The number of shutdown servers."
::= { cmcIIISetupShutdown 1 }
cmcIIIShutdownTable OBJECT-TYPE
SYNTAX SEQUENCE OF CmcIIIShutdownEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A list of shutdown entries."
::= { cmcIIISetupShutdown 2 }
cmcIIIShutdownEntry OBJECT-TYPE
SYNTAX CmcIIIShutdownEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entries of Shutdown table."
INDEX { cmcIIIShutdownIndex }
::= { cmcIIIShutdownTable 1 }
CmcIIIShutdownEntry ::=
SEQUENCE {
cmcIIIShutdownIndex Unsigned32,
cmcIIIShutdownServer DisplayString,
cmcIIIShutdownName DisplayString,
cmcIIIShutdownPort Unsigned32,
cmcIIIShutdownDelay Unsigned32,
cmcIIIShutdownEnabled INTEGER
}
cmcIIIShutdownIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index for the shutdown server table. Its value ranges between
1 and the value of cmcIIINumberOfShutdowns."
::= { cmcIIIShutdownEntry 1 }
cmcIIIShutdownServer OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "IP address or name of server to shutdown."
::= { cmcIIIShutdownEntry 2 }
cmcIIIShutdownName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Name of server to shutdown."
::= { cmcIIIShutdownEntry 3 }
cmcIIIShutdownPort OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Port used to shutdown server."
DEFVAL { 6003 }
::= { cmcIIIShutdownEntry 4 }
cmcIIIShutdownDelay OBJECT-TYPE
SYNTAX Unsigned32 (0..999)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Delay of server shutdown."
DEFVAL { 0 }
::= { cmcIIIShutdownEntry 5 }
cmcIIIShutdownEnabled OBJECT-TYPE
SYNTAX INTEGER {
disabled (1),
enabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable or disable this server shutdown entry."
DEFVAL { disabled }
::= { cmcIIIShutdownEntry 6 }
-- cmcIIISetupModbus: --
cmcIIIModbusStatus OBJECT-TYPE
SYNTAX INTEGER {
shutdown (1),
readonly (2),
writeonly (3),
readwrite (4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Modbus daemon running status:
(1) shutdown
(2) readonly
(3) writeonly
(4) readwrite."
DEFVAL { readonly }
::= { cmcIIISetupModbus 1 }
cmcIIIModbusPort OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "TCP/IP port of Modbus daemon."
DEFVAL { 502 }
::= { cmcIIISetupModbus 2 }
cmcIIINumberOfModbusSources OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of cmcIIIModbusTable entries. The number of Modbus access settings."
::= { cmcIIISetupModbus 3 }
cmcIIIModbusTable OBJECT-TYPE
SYNTAX SEQUENCE OF CmcIIIModbusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A list of Modbus entries."
::= { cmcIIISetupModbus 4 }
cmcIIIModbusEntry OBJECT-TYPE
SYNTAX CmcIIIModbusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entries of Modbus table."
INDEX { cmcIIIModbusIndex }
::= { cmcIIIModbusTable 1 }
CmcIIIModbusEntry ::=
SEQUENCE {
cmcIIIModbusIndex Unsigned32,
cmcIIIModbusAccess INTEGER,
cmcIIIModbusSource DisplayString
}
cmcIIIModbusIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index for the Modbus access table. Its value ranges
between 1 and the value of cmcIIINumberOfModbusSources."
::= { cmcIIIModbusEntry 1 }
cmcIIIModbusAccess OBJECT-TYPE
SYNTAX INTEGER {
readonly (1),
readwrite (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Modbus access for this source entry:
(1) readonly
(2) readwrite
This access is inferior to cmcIIIModbusStatus, e.g.
readwrite access also requires readwrite status."
DEFVAL { readonly }
::= { cmcIIIModbusEntry 2 }
cmcIIIModbusSource OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Source to restrict Modbus access.
It can either be a
specific hostname,
IP address, or a subnet represented as
IP/MASK (e.g. 10.10.10.0/255.255.255.0),
or IP/BITS (e.g. 10.10.10.0/24),
or the IPv6 equivalents.
The same source can be specified in several separate
entries (presumably with different access tokens),
and the first combination that matches the incoming
request will be selected."
::= { cmcIIIModbusEntry 3 }
-- cmcIIISetupRadius: --
cmcIIIRadiusStatus OBJECT-TYPE
SYNTAX INTEGER {
disabled (1),
enabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Radius usage:
(1) disabled
(2) enabled."
DEFVAL { disabled }
::= { cmcIIISetupRadius 1 }
cmcIIIRadiusServer OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "IP address of Radius server."
::= { cmcIIISetupRadius 2 }
cmcIIIRadiusPort OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "TCP/IP port of Radius server."
DEFVAL { 1812 }
::= { cmcIIISetupRadius 3 }
cmcIIIRadiusPassword OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Password required to authenticate at the Radius server."
::= { cmcIIISetupRadius 4 }
cmcIIIRadiusGroupMode OBJECT-TYPE
SYNTAX INTEGER {
manual (1),
byAttribute (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Radius group method:
(1) manual
(2) byAttribute."
DEFVAL { manual }
::= { cmcIIISetupRadius 5 }
cmcIIIRadiusGroupId OBJECT-TYPE
SYNTAX Unsigned32 (1..32)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Radius group id."
::= { cmcIIISetupRadius 6 }
cmcIIIRadiusAuth OBJECT-TYPE
SYNTAX INTEGER {
auto (1),
pap (2),
chap (3),
mschap (4),
md5 (5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Radius authentification method:
(1) auto - not supported
(2) pap
(3) chap
(4) mschap
(5) md5."
DEFVAL { pap }
::= { cmcIIISetupRadius 7 }
-- cmcIIISetupWebCam: --
cmcIIIWebCamStatus OBJECT-TYPE
SYNTAX INTEGER {
disabled (1),
enabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "WebCam usage:
(1) disabled
(2) enabled."
DEFVAL { disabled }
::= { cmcIIISetupWebCam 1 }
cmcIIIWebCamServer OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "IP address of WebCam."
::= { cmcIIISetupWebCam 2 }
cmcIIIWebCamUsername OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..30))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Username required to authenticate at the WebCam server."
::= { cmcIIISetupWebCam 3 }
cmcIIIWebCamPassword OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Password required to authenticate at the WebCam server."
::= { cmcIIISetupWebCam 4 }
cmcIIIWebCamIntervall OBJECT-TYPE
SYNTAX Unsigned32 (5..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "WebCam snapshot intervall in 1/10 seconds."
DEFVAL { 10 }
::= { cmcIIISetupWebCam 5 }
cmcIIIWebCamNumberofImages OBJECT-TYPE
SYNTAX Unsigned32 (1..16)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "WebCam number of images per event."
DEFVAL { 8 }
::= { cmcIIISetupWebCam 6 }
cmcIIIWebCamDestination OBJECT-TYPE
SYNTAX INTEGER {
usb (1),
sd (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "WebCam storage destination:
(1) usb
(2) sd."
DEFVAL { usb }
::= { cmcIIISetupWebCam 7 }
-- =============================================================================
-- cmcIIIDevs: --
cmcIIIOverallDevStatus OBJECT-TYPE
SYNTAX INTEGER {
ok (1),
warning (2),
alarm (3),
detected (4),
lost (5),
changed (6),
update (7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overall status of all devices."
::= { cmcIIIDevInfo 1 }
cmcIIINumberOfDevs OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of devices available."
::= { cmcIIIDevInfo 2 }
cmcIIILastChangeOverallDevStatus OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Timestamp of last status change of any device connected to CMCIII PU
according to operating time cmcIIIUnitUpTime."
::= { cmcIIIDevInfo 3 }
cmcIIILastChangeNumberOfDevs OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Timestamp of last device number change
according to operating time cmcIIIUnitUpTime."
::= { cmcIIIDevInfo 4 }
cmcIIILastChangeDevSettings OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Timestamp of last setting change of any device connected to CMCIII PU
according to operating time cmcIIIUnitUpTime.
This timestamp will be affected by SNMP settings only!"
::= { cmcIIIDevInfo 5 }
cmcIIILastChangeDevs OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Timestamp of last device change
according to operating time cmcIIIUnitUpTime."
::= { cmcIIIDevInfo 6 }
cmcIIIDevTable OBJECT-TYPE
SYNTAX SEQUENCE OF CmcIIIDevEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Headline of device table."
::= { cmcIIIDevs 2 }
cmcIIIDevEntry OBJECT-TYPE
SYNTAX CmcIIIDevEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entries of device table."
INDEX { cmcIIIDevIndex }
::= { cmcIIIDevTable 1 }
CmcIIIDevEntry ::=
SEQUENCE {
cmcIIIDevIndex Unsigned32,
cmcIIIDevName DisplayString,
cmcIIIDevAlias DisplayString,
cmcIIIDevType OBJECT IDENTIFIER,
cmcIIIDevNodeID Integer32,
cmcIIIDevStatus INTEGER,
cmcIIIDevArtNr DisplayString,
cmcIIIDevLocation DisplayString,
cmcIIIDevBus INTEGER,
cmcIIIDevPos Integer32,
cmcIIIDevFW DisplayString,
cmcIIIDevHW DisplayString,
cmcIIIDevSerial DisplayString,
cmcIIIDevProductWeek DisplayString,
cmcIIIDevLastChange Unsigned32,
cmcIIIDevURL DisplayString,
cmcIIIDevNumberOfVars Integer32,
cmcIIIDevNumberOfMsgs Integer32,
cmcIIIDevStatusText DisplayString,
cmcIIIDevCurrentMinConsumption Integer32,
cmcIIIDevCurrentMaxConsumption Integer32,
cmcIIIDevEntPhysicalIndex Integer32,
cmcIIIDevAssembly DisplayString
}
cmcIIIDevIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..126)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index of device connected to CMCIII PU."
::= { cmcIIIDevEntry 1 }
cmcIIIDevName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..30))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Name of the device connected to CMCIII PU."
::= { cmcIIIDevEntry 2 }
cmcIIIDevAlias OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..40))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Descriptional text for device connected to CMCIII PU."
::= { cmcIIIDevEntry 3 }
cmcIIIDevType OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Type of device chassis connected to CMCIII PU.
The authoritative identification of the device contained
in the entity is allocated within the SMI cmcIIIProducts
subtree (1.3.6.1.4.1.2606.7.7) and provides an easy and
unambiguous means for determining `what kind of box' is
connected.
E.g.: in cmcIIIProductChassis (1.3.6.1.4.1.2606.7.7.4.x)
the placeholder x is used for
1 : Not Available
2 : Internal Device of Processing Unit
3 : Virtual Device
4 : Temperature Sensor 7030.110
5 : Temp/Humidity Sensor 7030.111
6 : Vandalism Sensor 7030.130
7 : Access Sensor 7030.120
8 : Door Lock Device 7030.200, .210
9 : Universal Sensor 7030.190
10: Sensor Gateway 7030.100
11: Power Unit 7030.050
12: Pressure Sensor 7030.150
20-25: Gateways to RS422, RS485."
::= { cmcIIIDevEntry 4 }
cmcIIIDevNodeID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Node ID of device connected to CMCIII PU."
::= { cmcIIIDevEntry 5 }
cmcIIIDevStatus OBJECT-TYPE
SYNTAX INTEGER {
notAvail (1),
ok (2),
detect (3),
lost (4),
changed (5),
error (6),
fwUpdate (7),
fwUpdateRun (8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "General Status of device connected to CMCIII PU
(1) Device not available
(2) OK
(3) Device detected, confirmation required
(4) Device lost (disconnected), confirmation required
(5) Device changed
(6) Error
(7) Firmware Update pending
(8) Firmware Update running."
::= { cmcIIIDevEntry 6 }
cmcIIIDevArtNr OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..10))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Article number of device connected to CMCIII PU."
::= { cmcIIIDevEntry 7 }
cmcIIIDevLocation OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..40))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Location of device connected to CMCIII PU."
::= { cmcIIIDevEntry 8 }
cmcIIIDevBus OBJECT-TYPE
SYNTAX INTEGER {
canBus1 (1),
canBus2 (2),
virtual (3),
modbus (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "CAN bus of device connected to CMCIII PU."
::= { cmcIIIDevEntry 9 }
cmcIIIDevPos OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Position (order) of device in CAN bus connected to CMCIII PU."
::= { cmcIIIDevEntry 10 }
cmcIIIDevFW OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..12))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "FW version of device connected to CMCIII PU."
::= { cmcIIIDevEntry 11 }
cmcIIIDevHW OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..12))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "HW version of device connected to CMCIII PU."
::= { cmcIIIDevEntry 12 }
cmcIIIDevSerial OBJECT-TYPE
SYNTAX DisplayString (SIZE (8..8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Serial number of device connected to CMCIII PU."
::= { cmcIIIDevEntry 13 }
cmcIIIDevProductWeek OBJECT-TYPE
SYNTAX DisplayString (SIZE (8..8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Production week of device connected to CMCIII PU."
::= { cmcIIIDevEntry 14 }
cmcIIIDevLastChange OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Timestamp of last change of device connected to CMCIII PU
according to operating time cmcIIIUnitUpTime."
::= { cmcIIIDevEntry 15 }
cmcIIIDevURL OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..30))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "URL to device page of CMCIII PU (if available)."
::= { cmcIIIDevEntry 16 }
cmcIIIDevNumberOfVars OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of variables available on this device.
This variable will give the number of rows of the
variable table cmcIIIVarTable belonging to this device."
::= { cmcIIIDevEntry 17 }
cmcIIIDevNumberOfMsgs OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of messages available in this device.
This variable will give the number of rows of the message
table cmcIIIMsgTable belonging to this device."
::= { cmcIIIDevEntry 18 }
cmcIIIDevStatusText OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..160))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Latest status of this device."
::= { cmcIIIDevEntry 19 }
cmcIIIDevCurrentMinConsumption OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Standby power consumption of device in mA."
::= { cmcIIIDevEntry 20 }
cmcIIIDevCurrentMaxConsumption OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Maximal power consumption of device in mA."
::= { cmcIIIDevEntry 21 }
cmcIIIDevEntPhysicalIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Corresponding entPhysicalIndex of this device. 0 if none exists."
::= { cmcIIIDevEntry 22 }
cmcIIIDevAssembly OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..100))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Assembly of this device."
::= { cmcIIIDevEntry 23 }
-- =============================================================================
-- cmcIIIVars: --
cmcIIINumberOfVars OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Total number of variables available."
::= { cmcIIIVarInfo 1 }
cmcIIILastChangeNumberOfVars OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Timestamp of last change number of variables
according to operating time cmcIIIUnitUpTime."
::= { cmcIIIVarInfo 2 }
cmcIIILastChangeVarSettings OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Timestamp of last setting change
according to operating time cmcIIIUnitUpTime
This timestamp will be affected by SNMP settings only!"
::= { cmcIIIVarInfo 3 }
cmcIIILastChangeVars OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Timestamp of last variable change
according to operating time cmcIIIUnitUpTime."
::= { cmcIIIVarInfo 4 }
cmcIIIVarByQualityHide OBJECT-TYPE
SYNTAX BITS {
-- notInUse is a dummy entry to keep mapping to cmcIIIVarQuality and avoid warnings of MIB checking using smilint!
notInUse (0),
undefined (1),
ok (2),
warning (3),
alarm (4),
info (5),
undefinedNoValue(21),
okNoValue (22),
warningNoValue (23),
alarmNoValue (24),
infoNoValue (25)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Hide entries in cmcIIIVarByQualityTable to reduce table size."
DEFVAL {{ ok }}
::= { cmcIIIVarInfo 5 }
cmcIIIDynUpdateRate OBJECT-TYPE
SYNTAX Unsigned32 (5..86400)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Update rate in seconds to add/remove entries
from cmcIIIVarIntDynTable and cmcIIIVarStrDynTable.
Note: cmcIIIDynUpdateHistory (>0) has to be at least twice cmcIIIDynUpdateRate."
DEFVAL { 10 }
::= { cmcIIIVarInfo 6 }
cmcIIIDynUpdateHistory OBJECT-TYPE
SYNTAX Unsigned32 (0 | 10..2419200)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "History range in seconds to restrict data view
in cmcIIIVarIntDynTable and cmcIIIVarStrDynTable.
The value 0 will disable the history range restriction completly.
Note: cmcIIIDynUpdateHistory (>0) has to be at least twice cmcIIIDynUpdateRate."
DEFVAL { 300 }
::= { cmcIIIVarInfo 7 }
-- table with entry for each variable available on this unit
cmcIIIVarTable OBJECT-TYPE
SYNTAX SEQUENCE OF CmcIIIVarEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Headline of variable table."
::= { cmcIIIVars 2 }
cmcIIIVarEntry OBJECT-TYPE
SYNTAX CmcIIIVarEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entries of variable table."
INDEX { cmcIIIVarDeviceIndex,cmcIIIVarIndex }
::= { cmcIIIVarTable 1 }
CmcIIIVarEntry ::=
SEQUENCE {
cmcIIIVarDeviceIndex Unsigned32,
cmcIIIVarIndex Unsigned32,
cmcIIIVarName DisplayString,
cmcIIIVarType INTEGER,
cmcIIIVarUnit DisplayString,
cmcIIIVarDataType INTEGER,
cmcIIIVarScale Integer32,
cmcIIIVarConstraints DisplayString,
cmcIIIVarSteps Integer32,
cmcIIIVarValueStr DisplayString,
cmcIIIVarValueInt Integer32,
cmcIIIVarLastChange Unsigned32,
cmcIIIVarAccess INTEGER,
cmcIIIVarQuality INTEGER,
cmcIIIVarEntPhysicalIndex Integer32
}
cmcIIIVarDeviceIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index for the device. Its value ranges
between 1 and the value of cmcIIINumberOfDevs."
::= { cmcIIIVarEntry 1 }
cmcIIIVarIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index for the list of value entries. Its value ranges
between 1 and the value of cmcIIINumberOfVars."
::= { cmcIIIVarEntry 2 }
cmcIIIVarName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..50))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Clear name of variable."
::= { cmcIIIVarEntry 3 }
cmcIIIVarType OBJECT-TYPE
SYNTAX INTEGER {
description (1),
value (2),
setHigh (3),
setWarn (4),
setLow (5),
hysteresis (6),
status (7),
statusEnum (8),
setWarnLow (9),
unit (10),
alarmDur (11),
steps (12),
configPar (13),
category (14),
logic (15),
logicEnum (16),
setCntrl (17),
offset (18),
type (19),
output (20),
outputdelay (21),
outputaction (22),
outdelayExec (23),
outputEnum (24),
config (25),
configNum (26),
configLcpFcs (27),
assembly (28),
configWiring (29),
sensitivity (30),
accessTime (31),
accessLogic (32),
position (33),
positionEnum (34),
pin (35),
sequence (36),
remote (37),
stringValue (38),
outputPWM (40),
rotation (41),
circuit (42),
rizoneArray (43),
socketType (44),
customValue (45),
rcmPosition (46),
rcmPosEnum (47),
rcmResult (48),
productDate (50),
orderNr (51),
devName (52),
devLocation (53),
currentMin (54),
currentMax (55),
keycode (80),
command (81),
commandEnum (82),
commandKeypad (83),
commandService (84),
commandRack (85),
commandRCM (86),
unitType (90),
swVersion (91),
serialNumber (92),
mountPos (93),
mountPosEnum (94),
gsmStatus (95),
connected (96),
connectedEnum (97),
grouping (100),
scaleValue (110),
scaleUnit (111),
scaleStart (112),
scaleEnd (113),
commandCtrl (120),
commandCtrlDP (121),
commandCtrlWdt (122),
fanAffect (123),
waterAffect (124),
commandDP (125),
commandBEP (126),
commandMiniCh (127),
remoteBEP (128),
location (130),
building (131),
level (132),
room (133),
row (134),
rack (135),
operatingTime (136),
numberOfRU (137),
tagsQuit (138),
tagsChanged (139),
uid (140),
opModeMiniCh (145),
opModeBEP (146),
ignore (254),
illegal (255)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Type of variable."
::= { cmcIIIVarEntry 4 }
cmcIIIVarUnit OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..12))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Unit of variable e. g. degree C."
::= { cmcIIIVarEntry 5 }
cmcIIIVarDataType OBJECT-TYPE
SYNTAX INTEGER {
notAvail (1),
int (2),
string (3),
enum (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Datatype of variable."
::= { cmcIIIVarEntry 6 }
cmcIIIVarScale OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Scaling factor of variable value,
e. g. -100 -> value has to be divided by 100
+100 -> value has to be multiplied by 100."
::= { cmcIIIVarEntry 7 }
cmcIIIVarConstraints OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Constraints of value,
e. g. [-_ a-zA-Z0-9]+ (if VariableDatatype is 'string')."
::= { cmcIIIVarEntry 8 }
cmcIIIVarSteps OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Steps of variable value (resolution)."
::= { cmcIIIVarEntry 9 }
cmcIIIVarValueStr OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..40))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Value as string, including sign (+/-) and unit (degree C)."
::= { cmcIIIVarEntry 10 }
cmcIIIVarValueInt OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Value as integer."
::= { cmcIIIVarEntry 11 }
cmcIIIVarLastChange OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Timestamp of last update or change
according to operating time cmcIIIUnitUpTime."
::= { cmcIIIVarEntry 12 }
cmcIIIVarAccess OBJECT-TYPE
SYNTAX INTEGER {
none (1),
readonly (2),
readwrite (3),
readwriteswitch (4),
readwriteextended(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Access for value."
::= { cmcIIIVarEntry 13 }
cmcIIIVarQuality OBJECT-TYPE
SYNTAX INTEGER {
undefined (1),
ok (2),
warning (3),
alarm (4),
info (5),
undefinedNoValue(21),
okNoValue (22),
warningNoValue (23),
alarmNoValue (24),
infoNoValue (25)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Quality of variable."
::= { cmcIIIVarEntry 14 }
cmcIIIVarEntPhysicalIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Corresponding entPhysicalIndex of this variable. 0 if none exists."
::= { cmcIIIVarEntry 15 }
-- table with entry for each variable available on this unit sorted by cmcIIIVarType
cmcIIIVarByTypeTable OBJECT-TYPE
SYNTAX SEQUENCE OF CmcIIIVarByTypeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Headline of variable by type table."
::= { cmcIIIVars 3 }
cmcIIIVarByTypeEntry OBJECT-TYPE
SYNTAX CmcIIIVarByTypeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entries of variable by type table."
INDEX { cmcIIIVarByTypeType,cmcIIIVarByTypeDeviceIndex,cmcIIIVarByTypeIndex }
::= { cmcIIIVarByTypeTable 1 }
CmcIIIVarByTypeEntry ::=
SEQUENCE {
cmcIIIVarByTypeType INTEGER,
cmcIIIVarByTypeDeviceIndex Unsigned32,
cmcIIIVarByTypeIndex Unsigned32,
cmcIIIVarByTypeValueStr DisplayString,
cmcIIIVarByTypeValueInt Integer32,
cmcIIIVarByTypeLastChange Unsigned32
}
cmcIIIVarByTypeType OBJECT-TYPE
SYNTAX INTEGER {
description (1),
value (2),
setHigh (3),
setWarn (4),
setLow (5),
hysteresis (6),
status (7),
statusEnum (8),
setWarnLow (9),
unit (10),
alarmDur (11),
steps (12),
configPar (13),
category (14),
logic (15),
logicEnum (16),
setCntrl (17),
offset (18),
type (19),
output (20),
outputdelay (21),
outputaction (22),
outdelayExec (23),
outputEnum (24),
config (25),
configNum (26),
configLcpFcs (27),
assembly (28),
configWiring (29),
sensitivity (30),
accessTime (31),
accessLogic (32),
position (33),
positionEnum (34),
pin (35),
sequence (36),
remote (37),
stringValue (38),
outputPWM (40),
rotation (41),
circuit (42),
rizoneArray (43),
socketType (44),
customValue (45),
rcmPosition (46),
rcmPosEnum (47),
rcmResult (48),
productDate (50),
orderNr (51),
devName (52),
devLocation (53),
currentMin (54),
currentMax (55),
keycode (80),
command (81),
commandEnum (82),
commandKeypad (83),
commandService (84),
commandRack (85),
commandRCM (86),
unitType (90),
swVersion (91),
serialNumber (92),
mountPos (93),
mountPosEnum (94),
gsmStatus (95),
connected (96),
connectedEnum (97),
grouping (100),
scaleValue (110),
scaleUnit (111),
scaleStart (112),
scaleEnd (113),
commandCtrl (120),
commandCtrlDP (121),
commandCtrlWdt (122),
fanAffect (123),
waterAffect (124),
commandDP (125),
commandBEP (126),
commandMiniCh (127),
remoteBEP (128),
location (130),
building (131),
level (132),
room (133),
row (134),
rack (135),
operatingTime (136),
numberOfRU (137),
tagsQuit (138),
tagsChanged (139),
uid (140),
opModeMiniCh (145),
opModeBEP (146),
ignore (254),
illegal (255)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Type of variable."
::= { cmcIIIVarByTypeEntry 1 }
cmcIIIVarByTypeDeviceIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index for the device. Its value ranges
between 1 and the value of cmcIIINumberOfDevs."
::= { cmcIIIVarByTypeEntry 2 }
cmcIIIVarByTypeIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index for the list of value entries. Its value ranges
between 1 and the value of cmcIIINumberOfVars."
::= { cmcIIIVarByTypeEntry 3 }
cmcIIIVarByTypeValueStr OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..40))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Value as string, including sign (+/-) and unit (degree C)."
::= { cmcIIIVarByTypeEntry 4 }
cmcIIIVarByTypeValueInt OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Value as integer."
::= { cmcIIIVarByTypeEntry 5 }
cmcIIIVarByTypeLastChange OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Timestamp of last update or change
according to operating time cmcIIIUnitUpTime."
::= { cmcIIIVarByTypeEntry 6 }
-- table with entry for each variable available on this unit sorted by cmcIIIVarType
cmcIIIVarByQualityTable OBJECT-TYPE
SYNTAX SEQUENCE OF CmcIIIVarByQualityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Headline of variable by quality table."
::= { cmcIIIVars 4 }
cmcIIIVarByQualityEntry OBJECT-TYPE
SYNTAX CmcIIIVarByQualityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entries of variable by quality table.
The view of this table may be reduced using the bits of cmcIIIVarByQualityHide."
INDEX { cmcIIIVarByQualityQuality,cmcIIIVarByQualityDeviceIndex,cmcIIIVarByQualityIndex }
::= { cmcIIIVarByQualityTable 1 }
CmcIIIVarByQualityEntry ::=
SEQUENCE {
cmcIIIVarByQualityQuality INTEGER,
cmcIIIVarByQualityDeviceIndex Unsigned32,
cmcIIIVarByQualityIndex Unsigned32,
cmcIIIVarByQualityValueStr DisplayString,
cmcIIIVarByQualityValueInt Integer32,
cmcIIIVarByQualityLastChange Unsigned32
}
cmcIIIVarByQualityQuality OBJECT-TYPE
SYNTAX INTEGER {
undefined (1),
ok (2),
warning (3),
alarm (4),
info (5),
undefinedNoValue(21),
okNoValue (22),
warningNoValue (23),
alarmNoValue (24),
infoNoValue (25)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Quality of variable."
::= { cmcIIIVarByQualityEntry 1 }
cmcIIIVarByQualityDeviceIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index for the device. Its value ranges
between 1 and the value of cmcIIINumberOfDevs."
::= { cmcIIIVarByQualityEntry 2 }
cmcIIIVarByQualityIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index for the list of value entries. Its value ranges
between 1 and the value of cmcIIINumberOfVars."
::= { cmcIIIVarByQualityEntry 3 }
cmcIIIVarByQualityValueStr OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..40))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Value as string, including sign (+/-) and unit (degree C)."
::= { cmcIIIVarByQualityEntry 4 }
cmcIIIVarByQualityValueInt OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Value as integer."
::= { cmcIIIVarByQualityEntry 5 }
cmcIIIVarByQualityLastChange OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Timestamp of last update or change
according to operating time cmcIIIUnitUpTime."
::= { cmcIIIVarByQualityEntry 6 }
-- table with entry for each dynamic integer variable (cmcIIIVarDataType = int(2) or enum(4)) available on this unit
cmcIIIVarIntDynTable OBJECT-TYPE
SYNTAX SEQUENCE OF CmcIIIVarIntDynEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Headline of dynamically changed variable table of cmcIIIVarDatatype int(2) or enum(4).
This table is updated each cmcIIIVarDynUpdateRate seconds only.
This table has variables updated/changed within the last cmcIIIVarDynUpdateHistory seconds only.
This table has dynamic integer variables (cmcIIIVarDataType = int(2) or enum(4)) only."
::= { cmcIIIVars 5 }
cmcIIIVarIntDynEntry OBJECT-TYPE
SYNTAX CmcIIIVarIntDynEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entries of dynamically changed table."
INDEX { cmcIIIVarIntDynDeviceIndex,cmcIIIVarIntDynIndex,cmcIIIVarIntDynLastChange }
::= { cmcIIIVarIntDynTable 1 }
CmcIIIVarIntDynEntry ::=
SEQUENCE {
cmcIIIVarIntDynDeviceIndex Unsigned32,
cmcIIIVarIntDynIndex Unsigned32,
cmcIIIVarIntDynLastChange Unsigned32,
cmcIIIVarIntDynValue Integer32
}
cmcIIIVarIntDynDeviceIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index for the device. Its value ranges
between 1 and the value of cmcIIINumberOfDevs."
::= { cmcIIIVarIntDynEntry 1 }
cmcIIIVarIntDynIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index for the list of value entries. Its value ranges
between 1 and the value of cmcIIINumberOfVars."
::= { cmcIIIVarIntDynEntry 2 }
cmcIIIVarIntDynLastChange OBJECT-TYPE
SYNTAX Unsigned32 (0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Timestamp of last update or change
according to operating time cmcIIIUnitUpTime.
Entries may be restricted by cmcIIIDynUpdateHistory."
::= { cmcIIIVarIntDynEntry 3 }
cmcIIIVarIntDynValue OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Value as integer."
::= { cmcIIIVarIntDynEntry 4 }
-- table with entry for each dynamic string variable (cmcIIIVarDataType = string(3)) available on this unit
cmcIIIVarStrDynTable OBJECT-TYPE
SYNTAX SEQUENCE OF CmcIIIVarStrDynEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Headline of dynamically changed variable table of cmcIIIVarDataType string(3).
This table is updated each cmcIIIVarDynUpdateRate seconds only.
This table has variables updated/changed within the last cmcIIIVarDynUpdateHistory seconds only.
This table has dynamic string variables (cmcIIIVarDataType = string(3)) only.
Please note, this table will be empty in most cases as strings are rarely changing."
::= { cmcIIIVars 6 }
cmcIIIVarStrDynEntry OBJECT-TYPE
SYNTAX CmcIIIVarStrDynEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entries of dynamically changed table."
INDEX { cmcIIIVarStrDynDeviceIndex,cmcIIIVarStrDynIndex,cmcIIIVarStrDynLastChange }
::= { cmcIIIVarStrDynTable 1 }
CmcIIIVarStrDynEntry ::=
SEQUENCE {
cmcIIIVarStrDynDeviceIndex Unsigned32,
cmcIIIVarStrDynIndex Unsigned32,
cmcIIIVarStrDynLastChange Unsigned32,
cmcIIIVarStrDynValue DisplayString
}
cmcIIIVarStrDynDeviceIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index for the device. Its value ranges
between 1 and the value of cmcIIINumberOfDevs."
::= { cmcIIIVarStrDynEntry 1 }
cmcIIIVarStrDynIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index for the list of value entries. Its value ranges
between 1 and the value of cmcIIINumberOfVars."
::= { cmcIIIVarStrDynEntry 2 }
cmcIIIVarStrDynLastChange OBJECT-TYPE
SYNTAX Unsigned32 (0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Timestamp of last update or change
according to operating time cmcIIIUnitUpTime.
Entries may be restricted by cmcIIIDynUpdateHistory."
::= { cmcIIIVarStrDynEntry 3 }
cmcIIIVarStrDynValue OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..40))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Value as string."
::= { cmcIIIVarStrDynEntry 4 }
-- =============================================================================
-- cmcIIIMsgs: --
cmcIIIOverallMsgStatus OBJECT-TYPE
SYNTAX INTEGER {
ok (1),
warning (2),
alarm (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overall message status of device."
::= { cmcIIIMsgInfo 1 }
cmcIIINumberOfMsgs OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of messages.
All status vars available in cmcIIIVarTable will cause a message in cmcIIIMsgTable."
::= { cmcIIIMsgInfo 2 }
cmcIIILastChangeOverallMsgStatus OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Timestamp of last status change
according to operating time cmcIIIUnitUpTime."
::= { cmcIIIMsgInfo 3 }
cmcIIILastChangeNumberOfMsgs OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Timestamp of last message number change
according to operating time cmcIIIUnitUpTime."
::= { cmcIIIMsgInfo 4 }
cmcIIILastChangeMsgSettings OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Timestamp of last setting change
according to operating time cmcIIIUnitUpTime
This timestamp will be affected by SNMP settings only!"
::= { cmcIIIMsgInfo 5 }
-- table with entry for each alarm available on this unit
cmcIIIMsgTable OBJECT-TYPE
SYNTAX SEQUENCE OF CmcIIIMsgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Headline of message table."
::= { cmcIIIMsgs 2 }
cmcIIIMsgEntry OBJECT-TYPE
SYNTAX CmcIIIMsgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entries of message table."
INDEX { cmcIIIMsgDeviceIndex,cmcIIIMsgIndex }
::= { cmcIIIMsgTable 1 }
CmcIIIMsgEntry ::=
SEQUENCE {
cmcIIIMsgDeviceIndex Unsigned32,
cmcIIIMsgIndex Unsigned32,
cmcIIIMsgText DisplayString,
cmcIIIMsgStatus INTEGER,
cmcIIIMsgRelay INTEGER,
cmcIIIMsgBeeper INTEGER,
cmcIIIMsgTrap BITS,
cmcIIIMsgSMTP BITS,
cmcIIIMsgSMS BITS,
cmcIIIMsgQuit INTEGER,
cmcIIIMsgDelay Unsigned32,
cmcIIIMsgSchedAlarmOff Integer32,
cmcIIIMsgQuality INTEGER,
cmcIIIMsgVarIdx Integer32,
cmcIIIMsgVarValueIdx Integer32,
cmcIIIMsgStatusText DisplayString
}
cmcIIIMsgDeviceIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index for the device. Its value ranges
between 1 and the value of cmcIIINumberOfDevs."
::= { cmcIIIMsgEntry 1 }
cmcIIIMsgIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index for the list of message entries. Its value ranges
between 1 and the value of cmcIIINumberOfMsgs."
::= { cmcIIIMsgEntry 2 }
cmcIIIMsgText OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..40))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Text for each message (entry in the table)."
::= { cmcIIIMsgEntry 3 }
cmcIIIMsgStatus OBJECT-TYPE
SYNTAX INTEGER {
notAvail (1),
configChanged (2),
error (3),
ok (4),
alarm (5),
highWarn (6),
lowAlarm (7),
highAlarm (8),
lowWarn (9),
setOff (10),
setOn (11),
open (12),
closed (13),
locked (14),
unlRemote (15),
doorOpen (16),
service (17),
standby (18),
busy (19),
noAccess (20),
lost (21),
detected (22),
lowVoltage (23),
probeopen (24),
probeshort (25),
calibration (26),
inactive (27),
active (28),
noPower (29),
readOnly (30),
exchanged (31),
valveOpen (32),
warning (33),
remote (34)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Actual message status
1: not available
2: configuration has changed (sensor new, changed, lost)
3: error
4: OK
5: alarm, e.g. smoke, vibration...
6: warning of analog value, value reached high warning threshold
7: analog value too low, value reached low threshold (Alarm)
8: analog value too high, value reached high threshold (Alarm)
9: warning of analog value, value reached low warning threshold
10: output is set to OFF
11: output is set to ON
12: door is open
13: door is closed
14: door is locked
15: door is unlocked by remote input, e.g. external card reader
16: door is unlocked by reader or keypad connected
17: door is unlocked by SNMP set command
18: door is unlocked by WEB
19: door is unlocked by timer
20: no access, wrong key code or card number
21: lost
22: detected
23: battery low, wireless sensor
24: sensor cable broken
25: sensor cable short
26: sensor calibration in progress
27: sensor is inactive
28: sensor is active
29: no Power (PSM)
30: read only (SD, USB-Stick)
31: control boards of LCP exchanged
32: valve open (info)
33: warning
34: remote control."
::= { cmcIIIMsgEntry 4 }
cmcIIIMsgRelay OBJECT-TYPE
SYNTAX INTEGER {
disable (1),
enable (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Setup of Alarm relay for this message/alarm
1: no switching of alarm relay
2: switching of alarm relay."
DEFVAL { enable }
::= { cmcIIIMsgEntry 5 }
cmcIIIMsgBeeper OBJECT-TYPE
SYNTAX INTEGER {
disable (1),
enable (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Setup of Alarm beeper for this alarm
1: no audible alarm
2: audible alarm."
DEFVAL { enable }
::= { cmcIIIMsgEntry 6 }
cmcIIIMsgTrap OBJECT-TYPE
SYNTAX BITS {
receiver1 (0),
receiver2 (1),
receiver3 (2),
receiver4 (3),
receiver5 (4),
receiver6 (5),
receiver7 (6),
receiver8 (7),
receiver9 (8),
receiver10 (9),
receiver11 (10),
receiver12 (11),
receiver13 (12),
receiver14 (13),
receiver15 (14),
receiver16 (15)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Each bit is representing an entry of cmcIIITrapReceiverTable.
If the corresponding cmcIIITrapReceiverStatus is enabled
setting this bit enables sending messages to this receiver."
::= { cmcIIIMsgEntry 7 }
cmcIIIMsgSMTP OBJECT-TYPE
SYNTAX BITS {
receiver1 (0),
receiver2 (1),
receiver3 (2),
receiver4 (3),
receiver5 (4),
receiver6 (5),
receiver7 (6),
receiver8 (7),
receiver9 (8),
receiver10 (9),
receiver11 (10),
receiver12 (11),
receiver13 (12),
receiver14 (13),
receiver15 (14),
receiver16 (15)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Each bit is representing an entry of cmcIIISmtpReceiverTable.
If the corresponding cmcIIISmtpReceiverStatus is enabled
setting this bit enables sending messages to this receiver."
::= { cmcIIIMsgEntry 8 }
cmcIIIMsgSMS OBJECT-TYPE
SYNTAX BITS {
receiver1 (0),
receiver2 (1),
receiver3 (2),
receiver4 (3),
receiver5 (4),
receiver6 (5),
receiver7 (6),
receiver8 (7),
receiver9 (8),
receiver10 (9),
receiver11 (10),
receiver12 (11),
receiver13 (12),
receiver14 (13),
receiver15 (14),
receiver16 (15)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Each bit is representing an entry of cmcIIISmsReceiverTable.
If the corresponding cmcIIISmsReceiverStatus is enabled
setting this bit enables sending messages to this receiver."
::= { cmcIIIMsgEntry 9 }
cmcIIIMsgQuit OBJECT-TYPE
SYNTAX INTEGER {
auto (1),
manual (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Reset of this alarm
1: auto
2: manual, alarm needs confirmation, e. g. with 'C' key."
DEFVAL { auto }
::= { cmcIIIMsgEntry 10 }
cmcIIIMsgDelay OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Delay of alarm condition."
::= { cmcIIIMsgEntry 11 }
cmcIIIMsgSchedAlarmOff OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Alarm condition disabled by scheduler."
::= { cmcIIIMsgEntry 12 }
cmcIIIMsgQuality OBJECT-TYPE
SYNTAX INTEGER {
undefined (1),
ok (2),
warning (3),
alarm (4),
info (5),
undefinedNoValue(21),
okNoValue (22),
warningNoValue (23),
alarmNoValue (24),
infoNoValue (25)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Quality of variable."
::= { cmcIIIMsgEntry 13 }
cmcIIIMsgVarIdx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Index of variable 'Status' in variable table generating this message."
::= { cmcIIIMsgEntry 14 }
cmcIIIMsgVarValueIdx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Index of variable 'Value' in the variable table."
::= { cmcIIIMsgEntry 15 }
cmcIIIMsgStatusText OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..160))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Message status text."
::= { cmcIIIMsgEntry 16 }
-- =============================================================================
-- cmcIIIDrcs: --
cmcIIIOverallDrcStatus OBJECT-TYPE
SYNTAX INTEGER {
ok (1),
warning (2),
alarm (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overall DRC status of devices."
::= { cmcIIIDrcInfo 1 }
cmcIIINumberOfDrcs OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of DRCs available."
::= { cmcIIIDrcInfo 2 }
cmcIIIOverallLastChangeDrcStatus OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overall timestamp of last DRC change
according to operating time cmcIIIUnitUpTime."
::= { cmcIIIDrcInfo 3 }
cmcIIILastChangeNumberOfDrcs OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overall timestamp of last DRC number change
according to operating time cmcIIIUnitUpTime."
::= { cmcIIIDrcInfo 4 }
cmcIIIOverallDrcUtilization OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Percentage of occupied RUs."
::= { cmcIIIDrcInfo 5 }
cmcIIIOverallDrcPower OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Total Power in Watts, calculated from all cmcIIITotalDrcPower -values."
::= { cmcIIIDrcInfo 6 }
-- table with entry for each DRC available on this unit
cmcIIIDrcTable OBJECT-TYPE
SYNTAX SEQUENCE OF CmcIIIDrcEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Headline of DRC table."
::= { cmcIIIDrcs 2 }
cmcIIIDrcEntry OBJECT-TYPE
SYNTAX CmcIIIDrcEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entries of DRC table."
INDEX { cmcIIIDrcIndex }
::= { cmcIIIDrcTable 1 }
CmcIIIDrcEntry ::=
SEQUENCE {
cmcIIIDrcIndex Unsigned32,
cmcIIIDrcStatus INTEGER,
cmcIIILastChangeDrcStatus Unsigned32,
cmcIIIDrcUnitName DisplayString,
cmcIIIDrcLocation DisplayString,
cmcIIIDrcBuilding DisplayString,
cmcIIIDrcLevel DisplayString,
cmcIIIDrcRoom DisplayString,
cmcIIIDrcRow DisplayString,
cmcIIIDrcRackNr DisplayString,
cmcIIIDrcMfgDate DisplayString,
cmcIIIDrcSerialNr Unsigned32,
cmcIIIDrcOpHours Unsigned32,
cmcIIIDrcNumberOfRU Unsigned32,
cmcIIIDrcUtilization Unsigned32,
cmcIIITotalDrcPower Unsigned32,
cmcIIIDrcSwController DisplayString,
cmcIIIDrcSwBootloader DisplayString,
cmcIIIDrcFwController DisplayString,
cmcIIIDrcSwAntenna DisplayString,
cmcIIIDrcSwAntennaBL DisplayString,
cmcIIIDrcCommand INTEGER
}
cmcIIIDrcIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index for the DRC. Its value ranges
between 1 and the value of cmcIIINumberOfDrcs."
::= { cmcIIIDrcEntry 1 }
cmcIIIDrcStatus OBJECT-TYPE
SYNTAX INTEGER {
notAvail (1),
configChanged (2),
error (3),
ok (4),
alarm (5),
service (17),
lost (21),
detected (22)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "DRC status of device."
::= { cmcIIIDrcEntry 2 }
cmcIIILastChangeDrcStatus OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Timestamp of last DRC change
according to operating time cmcIIIUnitUpTime."
::= { cmcIIIDrcEntry 3 }
cmcIIIDrcUnitName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..10))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Unit of Installation of DRC."
::= { cmcIIIDrcEntry 4 }
cmcIIIDrcLocation OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Location of Installation of DRC."
::= { cmcIIIDrcEntry 5 }
cmcIIIDrcBuilding OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Building of Installation of DRC."
::= { cmcIIIDrcEntry 6 }
cmcIIIDrcLevel OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Level of Installation of DRC."
::= { cmcIIIDrcEntry 7 }
cmcIIIDrcRoom OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Room of Installation of DRC."
::= { cmcIIIDrcEntry 8 }
cmcIIIDrcRow OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..16))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Row of Installation of DRC."
::= { cmcIIIDrcEntry 9 }
cmcIIIDrcRackNr OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..8))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Rack number of Installation of DRC."
::= { cmcIIIDrcEntry 10 }
cmcIIIDrcMfgDate OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..10))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Manufacture date of DRC, format DD.MM.YYYY."
::= { cmcIIIDrcEntry 11 }
cmcIIIDrcSerialNr OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Serial number of DRC."
::= { cmcIIIDrcEntry 12 }
cmcIIIDrcOpHours OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Operational hours of DRC."
::= { cmcIIIDrcEntry 13 }
cmcIIIDrcNumberOfRU OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of RUs."
::= { cmcIIIDrcEntry 14 }
cmcIIIDrcUtilization OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Percentage of occupied RUs."
::= { cmcIIIDrcEntry 15 }
cmcIIITotalDrcPower OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Total Power in Watts, calculated from all cmcIIIDrcPower -values."
::= { cmcIIIDrcEntry 16 }
cmcIIIDrcSwController OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Software version of controller."
::= { cmcIIIDrcEntry 17 }
cmcIIIDrcSwBootloader OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Software version of controller bootloader."
::= { cmcIIIDrcEntry 18 }
cmcIIIDrcFwController OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Firmware version of controller."
::= { cmcIIIDrcEntry 19 }
cmcIIIDrcSwAntenna OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Software version of antenna module."
::= { cmcIIIDrcEntry 20 }
cmcIIIDrcSwAntennaBL OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Software version of antenna modul bootloader."
::= { cmcIIIDrcEntry 21 }
cmcIIIDrcCommand OBJECT-TYPE
SYNTAX INTEGER {
noQuit (1),
quit (2),
ledAuto (3),
ledOnOccupied (4),
ledOnFreeRU (5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Command (to) send to the DRC
1: no Quit command
2: Quit command
3: LED auto, LED will show status of TAG (detected, lost..)
4: LEDs of occupied RUs will be switched on
5: LEDs of free RUs will be switched on."
DEFVAL { noQuit }
::= { cmcIIIDrcEntry 22 }
-- table with entry for each DRC Tag available on this unit
cmcIIITagTable OBJECT-TYPE
SYNTAX SEQUENCE OF CmcIIITagEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Headline of DRC Tag table."
::= { cmcIIIDrcs 3 }
cmcIIITagEntry OBJECT-TYPE
SYNTAX CmcIIITagEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entries of tag table."
INDEX { cmcIIITagDrcIndex,cmcIIITagRuIndex }
::= { cmcIIITagTable 1 }
CmcIIITagEntry ::=
SEQUENCE {
cmcIIITagDrcIndex Unsigned32,
cmcIIITagRuIndex Unsigned32,
cmcIIITagStatus INTEGER,
cmcIIITagUID DisplayString,
cmcIIITagPosition Unsigned32,
cmcIIITagUnitFormfactor Unsigned32,
cmcIIITagOffset Unsigned32,
cmcIIITagRuPosition Unsigned32,
cmcIIITagDeviceClass INTEGER,
cmcIIITagDescName DisplayString,
cmcIIITagManufacturer DisplayString,
cmcIIITagType DisplayString,
cmcIIITagSerialNumber DisplayString,
cmcIIITagVendor DisplayString,
cmcIIITagMac1 DisplayString,
cmcIIITagMac2 DisplayString,
cmcIIITagService DisplayString,
cmcIIITagDeviceName DisplayString,
cmcIIITagInventoryCode DisplayString,
cmcIIITagPower Unsigned32,
cmcIIITagCurrent Unsigned32,
cmcIIITagVoltage Unsigned32,
cmcIIITagLastService DisplayString,
cmcIIITagNextService DisplayString,
cmcIIITagLastUpdate DisplayString,
cmcIIITagNextUpdate DisplayString,
cmcIIITagInitialStart DisplayString,
cmcIIITagCustom DisplayString,
cmcIIITagCommand INTEGER,
cmcIIITagStart Unsigned32,
cmcIIITagEnd Unsigned32,
cmcIIITagAntennaMap Unsigned32
}
cmcIIITagDrcIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index for the DRC. Its value ranges
between 1 and the value of cmcIIINumberOfDrcs."
::= { cmcIIITagEntry 1 }
cmcIIITagRuIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index for the RU of this DRC. This is the RU for this tag."
::= { cmcIIITagEntry 2 }
cmcIIITagStatus OBJECT-TYPE
SYNTAX INTEGER {
notAvail (1),
configChanged (2),
error (3),
ok (4),
alarm (5),
service (17),
lost (21),
detected (22)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status of the unit at this RU."
::= { cmcIIITagEntry 3 }
cmcIIITagUID OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "UID of the tag of the unit mounted at this position (RU)."
::= { cmcIIITagEntry 4 }
cmcIIITagPosition OBJECT-TYPE
SYNTAX Unsigned32 (0..9999)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Tag position within this RU, 0,1 or 2.
0: topmost position
1: middle position
2: lowermost position."
::= { cmcIIITagEntry 5 }
cmcIIITagUnitFormfactor OBJECT-TYPE
SYNTAX Unsigned32 (0..9999)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Formfactor of the chassis (number of RUs)."
::= { cmcIIITagEntry 6 }
cmcIIITagOffset OBJECT-TYPE
SYNTAX Unsigned32 (0..9999)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Tag offset.
Offset of the tag related to the topmost position (in one-third of a RU)."
::= { cmcIIITagEntry 7 }
cmcIIITagRuPosition OBJECT-TYPE
SYNTAX Unsigned32 (0..9999)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Position (RU) of the chassis."
::= { cmcIIITagEntry 8 }
cmcIIITagDeviceClass OBJECT-TYPE
SYNTAX INTEGER {
notDefined (1),
blankingPlate (2),
componentShelf (3),
cableRouting (4),
patchPanelCatX (5),
patchPanelFibreOptic(6),
ups (7),
powerSupply (8),
kvm (9),
switch (10),
monitorKeyboardDrawer(11),
monitor (12),
server (13),
storage (14)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Class of the device."
DEFVAL { notDefined }
::= { cmcIIITagEntry 9 }
cmcIIITagDescName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Description name of the unit at this RU."
::= { cmcIIITagEntry 10 }
cmcIIITagManufacturer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..16))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Manufacturer of the unit at this RU."
::= { cmcIIITagEntry 11 }
cmcIIITagType OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..16))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Type Name of the unit at this RU."
::= { cmcIIITagEntry 12 }
cmcIIITagSerialNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..16))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Serial number of the Unit at this RU."
::= { cmcIIITagEntry 13 }
cmcIIITagVendor OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..16))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Vendor of the unit at this RU."
::= { cmcIIITagEntry 14 }
cmcIIITagMac1 OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..17))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "MAC address 1 of the Unit at this RU."
::= { cmcIIITagEntry 15 }
cmcIIITagMac2 OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..17))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "MAC address 2 of the unit at this RU."
::= { cmcIIITagEntry 16 }
cmcIIITagService OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Vendor contact of the unit at this RU."
::= { cmcIIITagEntry 17 }
cmcIIITagDeviceName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Name of Unit at this RU."
::= { cmcIIITagEntry 18 }
cmcIIITagInventoryCode OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..200))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Inventory code of the unit at this RU."
::= { cmcIIITagEntry 19 }
cmcIIITagPower OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Power in Watts of the unit at this RU."
::= { cmcIIITagEntry 20 }
cmcIIITagCurrent OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Current in Amperes*10 of the unit at this RU."
::= { cmcIIITagEntry 21 }
cmcIIITagVoltage OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Voltage in Volts of the unit at this RU."
::= { cmcIIITagEntry 22 }
cmcIIITagLastService OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..40))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Last service of the unit at this RU."
::= { cmcIIITagEntry 23 }
cmcIIITagNextService OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..40))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Next service of the Unit at this RU."
::= { cmcIIITagEntry 24 }
cmcIIITagLastUpdate OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Last update of the unit at this RU."
::= { cmcIIITagEntry 25 }
cmcIIITagNextUpdate OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Next update of the unit at this RU."
::= { cmcIIITagEntry 26 }
cmcIIITagInitialStart OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..8))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Initial start (YYYYMMDD) of the unit at this RU."
::= { cmcIIITagEntry 27 }
cmcIIITagCustom OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..40))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Custom field of the unit at this RU."
::= { cmcIIITagEntry 28 }
cmcIIITagCommand OBJECT-TYPE
SYNTAX INTEGER {
noQuit (1),
quit (2),
ledAuto (3),
ledOn (4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Command (to) send to the unit at this RU."
DEFVAL { noQuit }
::= { cmcIIITagEntry 29 }
cmcIIITagStart OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Start position (bottom) of the chassis of this tag.
The resolution is one-third of a RU."
::= { cmcIIITagEntry 30 }
cmcIIITagEnd OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "End position (top) of the chassis of this tag.
The resolution is one-third of a RU."
::= { cmcIIITagEntry 31 }
cmcIIITagAntennaMap OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Tag position mapping to the antennas.
The resolution is one-third of a RU, one RU has three antennas.
Position 1 is at the bottom of the rack.
This value ranges from 1 to cmcIIIDrcNumberOfRU*3."
::= { cmcIIITagEntry 32 }
-- =============================================================================
-- cmcIIIFiles: --
cmcIIINumberOfFiles OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of Files available."
::= { cmcIIIFileInfo 1 }
cmcIIILastChangeFiles OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overall timestamp of last file change
according to operating time cmcIIIUnitUpTime."
::= { cmcIIIFileInfo 2 }
cmcIIILastChangeNumberOfFiles OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overall timestamp of last file number change
according to operating time cmcIIIUnitUpTime."
::= { cmcIIIFileInfo 3 }
-- table with entry for each file available on this unit
cmcIIIFileTable OBJECT-TYPE
SYNTAX SEQUENCE OF CmcIIIFileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Headline of file table."
::= { cmcIIIFiles 2 }
cmcIIIFileEntry OBJECT-TYPE
SYNTAX CmcIIIFileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entries of file table."
INDEX { cmcIIIFileIndex }
::= { cmcIIIFileTable 1 }
CmcIIIFileEntry ::=
SEQUENCE {
cmcIIIFileIndex Unsigned32,
cmcIIILastChangeFile Unsigned32,
cmcIIIFileSize Unsigned32,
cmcIIIFileChecksum Unsigned32,
cmcIIIFileName DisplayString
}
cmcIIIFileIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index for the file. Its value ranges
between 1 and the value of cmcIIINumberOfFiles."
::= { cmcIIIFileEntry 1 }
cmcIIILastChangeFile OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Timestamp of last file change
according to operating time cmcIIIUnitUpTime."
::= { cmcIIIFileEntry 2 }
cmcIIIFileSize OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Size of the file in bytes."
::= { cmcIIIFileEntry 3 }
cmcIIIFileChecksum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Checksum of the file."
::= { cmcIIIFileEntry 4 }
cmcIIIFileName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..40))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Name of the file."
::= { cmcIIIFileEntry 5 }
-- =============================================================================
-- cmcIIIControl: --
cmcIIIQuitUnit OBJECT-TYPE
SYNTAX INTEGER {
noQuit (1),
quit (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Command to quit (acknowledge) alarms of CMCIII unit.
Setting to 'quit' (2) will have same result as pressing 'C' on CMCIII.
Variable is automatically set back to 'noQuit' (1)."
DEFVAL { noQuit }
::= { cmcIIIControl 1 }
cmcIIISmsQueue OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..180))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Fast track to send a SMS message based on configuration of
cmcIIISetupSMS.
Message format: MessageText TabulatorAsSeparator ReceiverPhoneNumber
e.g.: Hello World!\t0123456789"
::= { cmcIIIControl 2 }
-- *****************************************************************************
-- Traps and Notifications: --
alarmSensorDevice NOTIFICATION-TYPE
OBJECTS {
cmcIIIDevName,
cmcIIIMsgText,
cmcIIIMsgStatus,
cmcIIIMsgStatusText
}
STATUS current
DESCRIPTION "Alarm of sensors of device."
--
-- #CATEGORY "Status Events."
-- #TYPE "Sensor unit alarm."
-- #SUMMARY "Device: %s, Message %s, Status: %s, Text: %s."
-- #ARGUMENTS {0,1,2,3}
-- #SEVERITY MAJOR
-- #TIMEINDEX 6
-- #STATE OPERATIONAL
--
::= { cmcIIINotifications 1 }
alarmDevice NOTIFICATION-TYPE
OBJECTS {
cmcIIIDevName,
cmcIIIDevAlias,
cmcIIIDevStatus,
cmcIIIDevStatusText
}
STATUS current
DESCRIPTION "Alarm of device."
--
-- #CATEGORY "Status Events."
-- #TYPE "Device alarm."
-- #SUMMARY "Device: %s, Alias %s, Status: %s, Text: %s."
-- #ARGUMENTS {0,1,2,3}
-- #SEVERITY MAJOR
-- #TIMEINDEX 6
-- #STATE OPERATIONAL
--
::= { cmcIIINotifications 2 }
reConfigAgent NOTIFICATION-TYPE
OBJECTS {
sysObjectID
}
STATUS current
DESCRIPTION "Agent reconfiguration."
--
-- #CATEGORY "Status Events."
-- #TYPE "Agent status."
-- #SUMMARY "Agent type: %s, Status: configuration has changed."
-- #ARGUMENTS {0}
-- #SEVERITY INFORMATIONAL
-- #TIMEINDEX 6
-- #STATE OPERATIONAL
--
::= { cmcIIINotifications 3 }
shutdownAgent NOTIFICATION-TYPE
OBJECTS {
sysObjectID
}
STATUS current
DESCRIPTION "Agent shutdown."
--
-- #CATEGORY "Status Events."
-- #TYPE "Agent status."
-- #SUMMARY "Agent type: %s, Status: shutdown."
-- #ARGUMENTS {0}
-- #SEVERITY SEVERE
-- #TIMEINDEX 6
-- #STATE NONOPERATIONAL
--
::= { cmcIIINotifications 4 }
-- *****************************************************************************
-- Compliance Statements --
cmcIIIMibCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION "The core compliance statement for all cmcIII implementations."
MODULE MANDATORY-GROUPS {
cmcIIITrapGroup,
cmcIIINotificationGroup,
cmcIIIInfoMibGroup,
cmcIIISetupMibGroup,
cmcIIIDeviceMibGroup
}
GROUP cmcIIITrapGroup
DESCRIPTION "trap handling."
GROUP cmcIIINotificationGroup
DESCRIPTION "notification handling."
GROUP cmcIIIInfoMibGroup
DESCRIPTION "base information handling."
GROUP cmcIIISetupMibGroup
DESCRIPTION "setup handling."
GROUP cmcIIIDeviceMibGroup
DESCRIPTION "device handling."
GROUP cmcIIIDrcMibGroup
DESCRIPTION "DRC handling."
GROUP cmcIIIFileMibGroup
DESCRIPTION "File handling."
GROUP cmcIIIControlMibGroup
DESCRIPTION "device control."
GROUP cmcIIIRelayMibGroup
DESCRIPTION "relay handling."
GROUP cmcIIISmsMibGroup
DESCRIPTION "SMS handling."
GROUP cmcIIISmtpMibGroup
DESCRIPTION "SMTP handling."
GROUP cmcIIISyslogMibGroup
DESCRIPTION "syslog handling."
GROUP cmcIIITimerMibGroup
DESCRIPTION "timer handling."
GROUP cmcIIILdapMibGroup
DESCRIPTION "LDAP handling."
GROUP cmcIIINtpMibGroup
DESCRIPTION "NTP handling."
GROUP cmcIIIShutdownMibGroup
DESCRIPTION "Shutdown server handling."
GROUP cmcIIIModbusMibGroup
DESCRIPTION "Modbus access handling."
GROUP cmcIIIRadiusMibGroup
DESCRIPTION "Radius handling."
GROUP cmcIIIWebCamMibGroup
DESCRIPTION "WebCam handling."
::= { cmcIIIMibCompliances 1 }
-- *****************************************************************************
-- Conformance Groups --
cmcIIITrapGroup OBJECT-GROUP
OBJECTS {
cmcIIIDevName,
cmcIIIDevAlias,
cmcIIIDevStatus,
cmcIIIDevStatusText,
cmcIIIMsgText,
cmcIIIMsgStatus,
cmcIIIMsgStatusText
}
STATUS current
DESCRIPTION "Conformance group for objects contained in cmcIII notifications."
::= { cmcIIIMibGroups 1 }
cmcIIINotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS {
alarmSensorDevice,
alarmDevice,
reConfigAgent,
shutdownAgent
}
STATUS current
DESCRIPTION "The cmcIII MIB notification group."
::= { cmcIIIMibGroups 2 }
cmcIIIInfoMibGroup OBJECT-GROUP
OBJECTS {
cmcIIIMibMajRev,
cmcIIIMibMinRev,
cmcIIIAgentRev,
cmcIIICapabilityRev,
cmcIIIUnitStatus,
cmcIIIUnitURL,
cmcIIIUnitHWRev,
cmcIIIUnitFWRev,
cmcIIIUnitOSRev,
cmcIIIUnitSerial,
cmcIIIUnitProd,
cmcIIIUnitType,
cmcIIIUnitCurrentSource,
cmcIIICan0CurrentConsumption,
cmcIIICan1CurrentConsumption,
cmcIIIUnitUpTime,
cmcIIIUnitMode,
cmcIIIUnitLoadAverage
}
STATUS current
DESCRIPTION "Conformance group for all cmcIII base information."
::= { cmcIIIMibGroups 3 }
cmcIIISetupMibGroup OBJECT-GROUP
OBJECTS {
cmcIIILastChangeSetup,
cmcIIISetTempUnit,
cmcIIITimeZone,
cmcIIISetupDate,
cmcIIISetupTime,
cmcIIIWebAccess,
cmcIIIHttpPort,
cmcIIIHttpsPort,
cmcIIIFtpAccess,
cmcIIIFtpPort,
cmcIIISshAccess,
cmcIIISshPort,
cmcIIITelnetAccess,
cmcIIITelnetPort,
cmcIIILanguage,
cmcIIIOpcUaAccess,
cmcIIIOpcUaPort,
cmcIIINumberOfTrapReceivers,
cmcIIITrapReceiverStatus,
cmcIIITrapReceiverIpAddress
}
STATUS current
DESCRIPTION "Conformance group for default cmcIII setup operations."
::= { cmcIIIMibGroups 4 }
cmcIIIDeviceMibGroup OBJECT-GROUP
OBJECTS {
cmcIIIOverallDevStatus,
cmcIIINumberOfDevs,
cmcIIILastChangeOverallDevStatus,
cmcIIILastChangeNumberOfDevs,
cmcIIILastChangeDevSettings,
cmcIIILastChangeDevs,
cmcIIIDevName,
cmcIIIDevAlias,
cmcIIIDevType,
cmcIIIDevNodeID,
cmcIIIDevStatus,
cmcIIIDevArtNr,
cmcIIIDevLocation,
cmcIIIDevBus,
cmcIIIDevPos,
cmcIIIDevFW,
cmcIIIDevHW,
cmcIIIDevSerial,
cmcIIIDevProductWeek,
cmcIIIDevLastChange,
cmcIIIDevURL,
cmcIIIDevNumberOfVars,
cmcIIIDevNumberOfMsgs,
cmcIIIDevStatusText,
cmcIIIDevCurrentMinConsumption,
cmcIIIDevCurrentMaxConsumption,
cmcIIIDevEntPhysicalIndex,
cmcIIIDevAssembly,
cmcIIINumberOfVars,
cmcIIILastChangeNumberOfVars,
cmcIIILastChangeVarSettings,
cmcIIILastChangeVars,
cmcIIIVarByQualityHide,
cmcIIIDynUpdateRate,
cmcIIIDynUpdateHistory,
cmcIIIVarName,
cmcIIIVarType,
cmcIIIVarUnit,
cmcIIIVarDataType,
cmcIIIVarScale,
cmcIIIVarConstraints,
cmcIIIVarSteps,
cmcIIIVarValueStr,
cmcIIIVarValueInt,
cmcIIIVarAccess,
cmcIIIVarLastChange,
cmcIIIVarQuality,
cmcIIIVarEntPhysicalIndex,
cmcIIIVarByTypeValueStr,
cmcIIIVarByTypeValueInt,
cmcIIIVarByTypeLastChange,
cmcIIIVarByQualityValueStr,
cmcIIIVarByQualityValueInt,
cmcIIIVarByQualityLastChange,
cmcIIIVarIntDynValue,
cmcIIIVarStrDynValue,
cmcIIIOverallMsgStatus,
cmcIIINumberOfMsgs,
cmcIIILastChangeOverallMsgStatus,
cmcIIILastChangeNumberOfMsgs,
cmcIIILastChangeMsgSettings,
cmcIIIMsgText,
cmcIIIMsgStatus,
cmcIIIMsgTrap,
cmcIIIMsgSMTP,
cmcIIIMsgQuit,
cmcIIIMsgDelay,
cmcIIIMsgSchedAlarmOff,
cmcIIIMsgQuality,
cmcIIIMsgVarIdx,
cmcIIIMsgVarValueIdx,
cmcIIIMsgStatusText
}
STATUS current
DESCRIPTION "Conformance group for all cmcIII device information."
::= { cmcIIIMibGroups 5 }
cmcIIIControlMibGroup OBJECT-GROUP
OBJECTS {
cmcIIIQuitUnit
}
STATUS current
DESCRIPTION "Conformance group for all cmcIII control operations."
::= { cmcIIIMibGroups 6 }
cmcIIIRelayMibGroup OBJECT-GROUP
OBJECTS {
cmcIIISetBeeper,
cmcIIIQuitRelay,
cmcIIILogicRelay,
cmcIIIUnitMsgRelay,
cmcIIIFunctionRelay,
cmcIIIMsgRelay,
cmcIIIMsgBeeper
}
STATUS current
DESCRIPTION "Conformance group for cmcIII relay and beeper operations."
::= { cmcIIIMibGroups 7 }
cmcIIISmsMibGroup OBJECT-GROUP
OBJECTS {
cmcIIISmsStatus,
cmcIIISmsPIN,
cmcIIISmsService,
cmcIIISmsMSN,
cmcIIISmsPreDial,
cmcIIINumberOfSmsReceivers,
cmcIIISmsReceiverStatus,
cmcIIISmsReceiverNumber,
cmcIIIMsgSMS,
cmcIIISmsQueue
}
STATUS current
DESCRIPTION "Conformance group for cmcIII SMS operations."
::= { cmcIIIMibGroups 8 }
cmcIIISmtpMibGroup OBJECT-GROUP
OBJECTS {
cmcIIISmtpStatus,
cmcIIISmtpServer,
cmcIIISmtpPort,
cmcIIISmtpAuth,
cmcIIISmtpUsername,
cmcIIISmtpPassword,
cmcIIISmtpSender,
cmcIIISmtpReply,
cmcIIINumberOfSmtpReceivers,
cmcIIISmtpReceiverStatus,
cmcIIISmtpReceiverAddress
}
STATUS current
DESCRIPTION "Conformance group for cmcIII SMTP operations."
::= { cmcIIIMibGroups 9 }
cmcIIISyslogMibGroup OBJECT-GROUP
OBJECTS {
cmcIIISysLogStatus,
cmcIIISysLogFacility,
cmcIIISysLogServer1,
cmcIIISysLogServer2
}
STATUS current
DESCRIPTION "Conformance group for cmcIII syslog operations."
::= { cmcIIIMibGroups 10 }
cmcIIITimerMibGroup OBJECT-GROUP
OBJECTS {
cmcIIINumberOfTimers,
cmcIIITimerStatus,
cmcIIITimerDayOfWeek,
cmcIIITimeOn,
cmcIIITimeOff,
cmcIIITimeControl,
cmcIIITimerFunction
}
STATUS current
DESCRIPTION "Conformance group for cmcIII timer operations."
::= { cmcIIIMibGroups 11 }
cmcIIILdapMibGroup OBJECT-GROUP
OBJECTS {
cmcIIILdapStatus,
cmcIIILdapServer,
cmcIIILdapBindDN,
cmcIIILdapBindPW,
cmcIIILdapUserBase,
cmcIIILdapUserSearch,
cmcIIILdapUserAttrib,
cmcIIILdapGroupBase,
cmcIIILdapGroupSearch,
cmcIIILdapGroupAttrib
}
STATUS current
DESCRIPTION "Conformance group for cmcIII LDAP operations."
::= { cmcIIIMibGroups 12 }
cmcIIINtpMibGroup OBJECT-GROUP
OBJECTS {
cmcIIINtpStatus,
cmcIIINtpTimeZone,
cmcIIINtpServer1,
cmcIIINtpServer2
}
STATUS current
DESCRIPTION "Conformance group for cmcIII NTP operations."
::= { cmcIIIMibGroups 13 }
cmcIIIShutdownMibGroup OBJECT-GROUP
OBJECTS {
cmcIIINumberOfShutdowns,
cmcIIIShutdownServer,
cmcIIIShutdownName,
cmcIIIShutdownPort,
cmcIIIShutdownDelay,
cmcIIIShutdownEnabled
}
STATUS current
DESCRIPTION "Conformance group for cmcIII shutdown server operations."
::= { cmcIIIMibGroups 14 }
cmcIIIModbusMibGroup OBJECT-GROUP
OBJECTS {
cmcIIIModbusStatus,
cmcIIIModbusPort,
cmcIIINumberOfModbusSources,
cmcIIIModbusAccess,
cmcIIIModbusSource
}
STATUS current
DESCRIPTION "Conformance group for cmcIII modbus operations."
::= { cmcIIIMibGroups 15 }
cmcIIIDrcMibGroup OBJECT-GROUP
OBJECTS {
cmcIIIOverallDrcStatus,
cmcIIINumberOfDrcs,
cmcIIIOverallLastChangeDrcStatus,
cmcIIILastChangeNumberOfDrcs,
cmcIIIOverallDrcUtilization,
cmcIIIOverallDrcPower,
cmcIIIDrcStatus,
cmcIIILastChangeDrcStatus,
cmcIIIDrcUnitName,
cmcIIIDrcLocation,
cmcIIIDrcBuilding,
cmcIIIDrcLevel,
cmcIIIDrcRoom,
cmcIIIDrcRow,
cmcIIIDrcRackNr,
cmcIIIDrcMfgDate,
cmcIIIDrcSerialNr,
cmcIIIDrcOpHours,
cmcIIIDrcNumberOfRU,
cmcIIIDrcUtilization,
cmcIIITotalDrcPower,
cmcIIIDrcSwController,
cmcIIIDrcSwBootloader,
cmcIIIDrcFwController,
cmcIIIDrcSwAntenna,
cmcIIIDrcSwAntennaBL,
cmcIIIDrcCommand,
cmcIIITagStatus,
cmcIIITagUID,
cmcIIITagPosition,
cmcIIITagUnitFormfactor,
cmcIIITagOffset,
cmcIIITagRuPosition,
cmcIIITagDeviceClass,
cmcIIITagDescName,
cmcIIITagManufacturer,
cmcIIITagType,
cmcIIITagSerialNumber,
cmcIIITagVendor,
cmcIIITagMac1,
cmcIIITagMac2,
cmcIIITagService,
cmcIIITagDeviceName,
cmcIIITagInventoryCode,
cmcIIITagPower,
cmcIIITagCurrent,
cmcIIITagVoltage,
cmcIIITagLastService,
cmcIIITagNextService,
cmcIIITagLastUpdate,
cmcIIITagNextUpdate,
cmcIIITagInitialStart,
cmcIIITagCustom,
cmcIIITagCommand,
cmcIIITagStart,
cmcIIITagEnd,
cmcIIITagAntennaMap
}
STATUS current
DESCRIPTION "Conformance group for cmcIII Drc operations."
::= { cmcIIIMibGroups 16 }
cmcIIIFileMibGroup OBJECT-GROUP
OBJECTS {
cmcIIINumberOfFiles,
cmcIIILastChangeFiles,
cmcIIILastChangeNumberOfFiles,
cmcIIILastChangeFile,
cmcIIIFileSize,
cmcIIIFileChecksum,
cmcIIIFileName
}
STATUS current
DESCRIPTION "Conformance group for cmcIII files."
::= { cmcIIIMibGroups 17 }
cmcIIIRadiusMibGroup OBJECT-GROUP
OBJECTS {
cmcIIIRadiusStatus,
cmcIIIRadiusServer,
cmcIIIRadiusPort,
cmcIIIRadiusPassword,
cmcIIIRadiusGroupMode,
cmcIIIRadiusGroupId,
cmcIIIRadiusAuth
}
STATUS current
DESCRIPTION "Conformance group for cmcIII Radius operations."
::= { cmcIIIMibGroups 18 }
cmcIIIWebCamMibGroup OBJECT-GROUP
OBJECTS {
cmcIIIWebCamStatus,
cmcIIIWebCamServer,
cmcIIIWebCamUsername,
cmcIIIWebCamPassword,
cmcIIIWebCamIntervall,
cmcIIIWebCamNumberofImages,
cmcIIIWebCamDestination
}
STATUS current
DESCRIPTION "Conformance group for cmcIII WebCam operations."
::= { cmcIIIMibGroups 19 }
-- *****************************************************************************
-- Capabilities --
-- please refer to RITTAL-CMCIII-CAPABILITY-MIB definitions --
-- *****************************************************************************
END
Reference in New Issue Copy Permalink