mibs/MIBS/ruckus/RUCKUS-DEVICE-MIB

348 lines
8.7 KiB
Plaintext
Raw Permalink Normal View History

2023-12-05 12:25:34 +01:00
--
-- Copyright (c) 2010 by Ruckus Wireless, Inc.
-- All Rights Reserved
--
RUCKUS-DEVICE-MIB DEFINITIONS ::= BEGIN
IMPORTS
ruckusCommonDeviceModule
FROM RUCKUS-ROOT-MIB
TruthValue,
DisplayString
FROM SNMPv2-TC
MODULE-IDENTITY,
OBJECT-TYPE,
IpAddress
FROM SNMPv2-SMI
OBJECT-GROUP,
MODULE-COMPLIANCE
FROM SNMPv2-CONF
ifIndex
FROM IF-MIB
RuckusCountryCode
FROM RUCKUS-TC-MIB;
ruckusDeviceMIB MODULE-IDENTITY
LAST-UPDATED "201010150800Z"
ORGANIZATION "Ruckus Wireless, Inc."
CONTACT-INFO
"Ruckus Wireless Inc.
Postal:
880 W Maude Ave
Sunnyvale, CA 94085
USA
EMail: support@ruckuswireless.com
Phone: +1-650-265-4200."
DESCRIPTION
"Ruckus device management mib."
::= { ruckusCommonDeviceModule 1 }
-- Groups
--
ruckusDeviceObjects OBJECT IDENTIFIER ::= { ruckusDeviceMIB 1 }
ruckusDeviceInfo OBJECT IDENTIFIER ::= { ruckusDeviceObjects 1 }
ruckusDeviceTrapInfo OBJECT IDENTIFIER ::= { ruckusDeviceObjects 2 }
ruckusDeviceIPInfo OBJECT IDENTIFIER ::= { ruckusDeviceObjects 3 }
ruckusDeviceWanInfo OBJECT IDENTIFIER ::= { ruckusDeviceObjects 4 }
ruckusDeviceEvents OBJECT IDENTIFIER ::= { ruckusDeviceMIB 2 }
-- Device Generals
--
ruckusDeviceName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies name of the device.
Show the same value as model name."
::= { ruckusDeviceInfo 1 }
ruckusDeviceReboot OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this object to true(1) would cause to reboot the device.
Always returns false(2) on read."
DEFVAL { false }
::= { ruckusDeviceInfo 2 }
ruckusDeviceRebootWithDefaults OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This allows the product to revert to factory defaults."
DEFVAL { false }
::= { ruckusDeviceInfo 3 }
ruckusDeviceCountryCode OBJECT-TYPE
SYNTAX RuckusCountryCode
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the country code.
Example ISO country codes: CA,US,HK,IL,CN,JP,TW."
::= { ruckusDeviceInfo 4 }
ruckusDeviceGPS OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies GPS coordinates of the device.
(e.g. 37.3881,-122.0258)"
::= { ruckusDeviceInfo 5 }
ruckusDeviceNEId OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "NE Id."
::= { ruckusDeviceInfo 6 }
ruckusDeviceLocation OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Location of the device.
Show the intstallation position."
::= { ruckusDeviceInfo 10 }
-- SNMP Trap Receiver
--
ruckusDeviceTrapDestination OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (2..40))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies primary trap destination IPv6 or IPv4 address."
::= { ruckusDeviceTrapInfo 1 }
ruckusDeviceTrapDestination2 OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (2..40))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies secondary trap destination IPv6 or IPv4 address."
::= { ruckusDeviceTrapInfo 2 }
-- Device Misc IP Configuration
--
ruckusDevicePrimaryDNS OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies primary DNS IP address."
::= { ruckusDeviceIPInfo 1 }
ruckusDeviceSecondaryDNS OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies secondary DNS IP address."
::= { ruckusDeviceIPInfo 2 }
ruckusDevicePrimaryDNSIPV6 OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (2..40))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies primary DNS IPV6 address."
::= { ruckusDeviceIPInfo 3 }
ruckusDeviceSecondaryDNSIPV6 OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (2..40))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies secondary DNS IPV6 address."
::= { ruckusDeviceIPInfo 4 }
-- Device's WAN Configuration
--
ruckusDeviceWanTable OBJECT-TYPE
SYNTAX SEQUENCE OF RuckusDeviceWanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Specifies each wan table."
::= { ruckusDeviceWanInfo 1 }
ruckusDeviceWanEntry OBJECT-TYPE
SYNTAX RuckusDeviceWanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Specifies each wan entry."
INDEX {
ifIndex }
::= { ruckusDeviceWanTable 1 }
RuckusDeviceWanEntry ::= SEQUENCE {
ruckusDeviceWanIPAddrMode INTEGER,
ruckusDeviceWanIPAddr IpAddress,
ruckusDeviceWanName DisplayString,
ruckusDeviceWanNetmask IpAddress,
ruckusDeviceWanGateway IpAddress,
ruckusDeviceWanIPVersion INTEGER,
ruckusDeviceWanIPV6AddrMode INTEGER,
ruckusDeviceWanIPV6Addr OCTET STRING,
ruckusDeviceWanIPV6PrefixLen INTEGER,
ruckusDeviceWanIPV6Gateway OCTET STRING }
ruckusDeviceWanIPAddrMode OBJECT-TYPE
SYNTAX INTEGER {
none(1),
static(2),
dhcp(3),
pppoe(4) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies how the wan gets its IP address.
none - bridging
static - Statically assigned IP address
dhcp - Using DHCP protocol
pppoe - Using PPPoE protocol
when ipaddr mode from dhcp to static,the relative nodes should be set together ,
including:ruckusDeviceWanIPAddr,ruckusDeviceWanNetmask,ruckusDeviceWanGateway
"
::= { ruckusDeviceWanEntry 1 }
ruckusDeviceWanIPAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is writable only if the ruckusDeviceWanIPAddrMode
is set to static(2)."
::= { ruckusDeviceWanEntry 2 }
ruckusDeviceWanName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the name of the wan interface."
::= { ruckusDeviceWanEntry 3 }
ruckusDeviceWanNetmask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the ip address mask if the ruckusDeviceWanIPAddrMode
is set to static(2)."
::= { ruckusDeviceWanEntry 4 }
ruckusDeviceWanGateway OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the gateway ipaddr if the ruckusDeviceWanIPAddrMode
is set to static(2)."
::= { ruckusDeviceWanEntry 5 }
ruckusDeviceWanIPVersion OBJECT-TYPE
SYNTAX INTEGER { ipv4(1), ipv6(2),dualstack(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the system ip version,ipv4 or ipv6 or dualstack.
ipv4 - only support IPV4
ipv6 - only support IPV6
dualstack - support IPV4 and IPV6"
DEFVAL {ipv6}
::= { ruckusDeviceWanEntry 8 }
ruckusDeviceWanIPV6AddrMode OBJECT-TYPE
SYNTAX INTEGER {
auto-configuration(1),
static(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies how the wan gets its IPV6 address.
auto-configuration - auto get ipv6 address by RFC about IPV6
static - Statically assigned IPV6 address
when ipv6addr mode from auto-configuration to static,the relative nodes should be set together ,
including:ruckusDeviceWanIPV6Addr,ruckusDeviceWanIPV6PrefixLen,ruckusDeviceWanIPV6Gateway "
DEFVAL {auto-configuration}
::= { ruckusDeviceWanEntry 10 }
ruckusDeviceWanIPV6Addr OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (2..40))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is writable only if the ruckusDeviceWanIPAddrMode
is set to static(2)."
::= { ruckusDeviceWanEntry 11 }
ruckusDeviceWanIPV6PrefixLen OBJECT-TYPE
SYNTAX INTEGER (3..128)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the ip v6 address prefix length if the ruckusDeviceWanIPV6AddrMode
is set to static(2)."
::= { ruckusDeviceWanEntry 12 }
ruckusDeviceWanIPV6Gateway OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (2..40))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the gateway ipv6 address if the ruckusDeviceWanIPV6AddrMode
is set to static(2)."
::= { ruckusDeviceWanEntry 13 }
-- Conformance & Compliance
--
END