david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
main
mibs/MIBS/saf/SAF-MPMUX-MIB

2930 lines
69 KiB
Plaintext
Raw Permalink Normal View History

Initial commit
2023-12-05 12:25:34 +01:00
SAF-MPMUX-MIB DEFINITIONS ::= BEGIN
-- Title: SAF SAF_MPMUX MIB version 2.15 in concise format
-- Date: 2006.07.14
-- By: Technical Support <techsupport@saftehnika.com>
-- changes:
-- 2010.02.09. - outputABCD R/W
IMPORTS
enterprises, NetworkAddress, IpAddress,
Counter, Gauge, TimeTicks FROM RFC1155-SMI
OBJECT-TYPE FROM RFC-1212
DisplayString FROM RFC1213-MIB
TRAP-TYPE FROM RFC-1215;
saf OBJECT IDENTIFIER ::= { enterprises 7571 }
--old saf_ft OBJECT IDENTIFIER ::= { enterprises 4858 }
tehnika OBJECT IDENTIFIER ::= { saf 100 }
microwaveRadio OBJECT IDENTIFIER ::= { tehnika 1}
pointToPoint OBJECT IDENTIFIER ::= { microwaveRadio 1 }
cfm22 OBJECT IDENTIFIER ::= { pointToPoint 2 }
mpmux OBJECT IDENTIFIER ::= { cfm22 22 }
--mpmux ====================================================================
terminal OBJECT IDENTIFIER ::= { mpmux 1 }
--termProduct Text
--termDescription Text
--termLocation Text promt>
--termVersion Text
--termOperation integer ok, error,
--termIduTemperature integer
--termRfCablePowerStatus integer off, ok, short
--termRestart ??? integer write restart ???
baseband OBJECT IDENTIFIER ::= { mpmux 2 }
--bbVersion Text
--bbOperation integer
--bbLinkCapacity integer Kbits
--bbLinkCapacityDescr Text MUX 2M+2M+2M+2M
--bbLoopback integer off, on
--bbSyncLostAlarm integer off, on
radio1 OBJECT IDENTIFIER ::= { mpmux 3 }
--rf1Allarm integer off,on
--rf1Version Text
--rf1Side integer low,high
--rf1Channel integer
--rf1TxFrequency Text
--rf1RxFrequency Text
--rf1TxPower integer dBm
--rf1RxState integer error, low, ok
--rf1RxLevel integer dBm
--rf1CableAtt integer dB
--rf1TxOut integer error, ok
--rf1TxPLL integer error, ok
--rf1RxPLL integer error, ok
--rf1OduTemperature integer
--rf1Humidity integer low, high
--rf1Loopback integer off, on
--rf1RxAlarmLevel integer dBm
radio2 OBJECT IDENTIFIER ::= { mpmux 4 }
--look radio1
switchCtrl OBJECT IDENTIFIER ::= { mpmux 5 }
-- activeLink
modules OBJECT IDENTIFIER ::= { mpmux 6 }
m1 OBJECT IDENTIFIER ::= { modules 1 }
m2 OBJECT IDENTIFIER ::= { modules 2 }
m3 OBJECT IDENTIFIER ::= { modules 3 }
m4 OBJECT IDENTIFIER ::= { modules 4 }
--type integer e1(33),v35(37),bridge(43), f2bridge(242)
--description Text
--version Text
--speed integer 2048 Kbits
--oper integer none(0),booting(1),ok(2),testing(3),
-- loopback(4),illegalSpeed(5),error(6)
--rx integer none(0),ok(1),noSignal(2),noLink(3),rxAIS(4),error(5)
--tx integer none(0),ok(1),txAIS(4),error(5)
--loopback integer off(0),on(1)
--rxInput integer other(0),coax(1),rj45(2),v35(3)
--txMode integer other(0),halfDuplex(1),fullDuplex(2)
--txClockSource integer other(0),master(1),slave(2)
--txClockPhase integer other(0),normal(1),inverse(2)
--dataPolarity integer other(0),normal(1),inverse(2)
termProduct OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Textual name of the model."
::= { terminal 1 }
termDescription OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Textual description of the model."
::= { terminal 2 }
termLocation OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Textual description of location (same as PROMT>)."
::= { terminal 3 }
termVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Textual version."
::= { terminal 4 }
termOperation OBJECT-TYPE
SYNTAX INTEGER {
none(0), -- none of the following
booting(1),
ok(2),
testing(3),
error(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"System operation."
::= { terminal 5 }
termIduTemperature OBJECT-TYPE
SYNTAX INTEGER(-128..127)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Integer variable."
::= { terminal 6 }
-- termRfCablePowerStatus OBJECT-TYPE
-- SYNTAX INTEGER {
-- off(0),
-- ok(1),
-- short(2),
-- error(3)
-- }
-- ACCESS read-only
-- STATUS obsolete
-- DESCRIPTION
-- "Look at termRf1CablePowerStatus and termRf2CablePowerStatus"
-- ::= { terminal 7 }
-- termUpTime OBJECT-TYPE
-- SYNTAX INTEGER
-- ACCESS read-only
-- STATUS obsolete
-- DESCRIPTION
-- "Integer variable."
-- ::= { terminal 8 }
-- termDownTime OBJECT-TYPE
-- SYNTAX INTEGER
-- ACCESS read-only
-- STATUS obsolete
-- DESCRIPTION
-- "Integer variable."
-- ::= { terminal 9 }
termFrameErrors OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Integer variable. "
::= { terminal 10 }
writeConfig OBJECT-TYPE
SYNTAX INTEGER
ACCESS write-only
STATUS mandatory
DESCRIPTION
"Write Config"
::= { terminal 11 }
restartCPU OBJECT-TYPE
SYNTAX INTEGER
ACCESS write-only
STATUS mandatory
DESCRIPTION
"Restart CPU"
::= { terminal 12 }
serialNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Serial number"
::= { terminal 13 }
termRf1CablePowerStatus OBJECT-TYPE
SYNTAX INTEGER {
off(0),
ok(1),
short(2),
error(3),
power-off(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Cable status from ODU1"
::= { terminal 14 }
termRf2CablePowerStatus OBJECT-TYPE
SYNTAX INTEGER {
off(0),
ok(1),
short(2),
error(3),
power-off(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Cable status from ODU2"
::= { terminal 15 }
-- PW 1
power3V3PS1 OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"IDU power voltage +3.3V"
::= { terminal 16 }
power5VPS1 OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"IDU power voltage +5V"
::= { terminal 17 }
powerM5VPS1 OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"IDU power voltage -5V"
::= { terminal 18 }
powerODU1V OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"ODU power voltage (V)"
::= { terminal 19 }
powerODU1I OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"ODU power current (A)"
::= { terminal 20 }
powerODU1W OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"ODU power (W)"
::= { terminal 21 }
-- PW 2
power3V3PS2 OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"IDU power voltage +3.3V"
::= { terminal 22 }
power5VPS2 OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"IDU power voltage +5V"
::= { terminal 23 }
powerM5VPS2 OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"IDU power voltage -5V"
::= { terminal 24 }
powerODU2V OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"ODU power voltage (V)"
::= { terminal 25 }
powerODU2I OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"ODU power current (A)"
::= { terminal 26 }
powerODU2W OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"ODU power (W)"
::= { terminal 27 }
-- end PW 1 2
cpuUsage OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"CPU usage [%]"
::= { terminal 28 }
termBFrameErr OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Background block errors"
::= { terminal 29 }
termStatCountTime OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Stat. count. time"
::= { terminal 30 }
termErroredSecond OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Err. seconds"
::= { terminal 31 }
termSeverelyErroredSecond OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Severe err. seconds"
::= { terminal 32 }
termSyncLostTime OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Sync lost time"
::= { terminal 33 }
termAvailableTime OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Available time"
::= { terminal 34 }
termUnAvailableTime OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unavailable time"
::= { terminal 35 }
termBer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Textual representation of BER"
::= { terminal 36 }
berAlarm OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The BER alarm"
::= { terminal 37 }
remoteAlarm OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Remote alarm"
::= { terminal 38 }
systemAlarm OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The SYSTEM alarm"
::= { terminal 39 }
inputABCD OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Input sensor"
::= { terminal 40 }
outputABCD OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The Output relays"
::= { terminal 41 }
termBerInPwOf10 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"The Power of 10 part of termBer"
::= { terminal 42 }
outputMaskABCD OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The Output relay bit mask.
If the correspondig bit is
0 - the output bit can be changed manualy
1 - the output bit changes automaticaly (according to sync lost, radio allarm etc.)"
::= { terminal 43 }
-- ****** Basebend ***************************************************
--bbVersion Text
--bbOperation integer
--bbLinkCapacity integer Kbits
--bbLinkCapacityDescr Text MUX 2M+2M+2M+2M
--bbLoopback integer off, on
--bbSyncLostAlarm integer off, on
bbVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Textual version."
::= { baseband 1 }
bbOperation OBJECT-TYPE
SYNTAX INTEGER {
none(0), -- none of the following
booting(1),
ok(2),
testing(3),
loopback(4),
illegalSpeed(5),
error(6)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"System operation."
::= { baseband 2 }
bbLinkCapacity OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Integer variable."
::= { baseband 3 }
bbLinkCapacityDescription OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Textual version."
::= { baseband 4 }
bbLoopback OBJECT-TYPE
SYNTAX INTEGER {
off(0),
digital(1),
analog(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Loopback Integer variable."
::= { baseband 5 }
bbSyncLostAlarm OBJECT-TYPE
SYNTAX INTEGER {
none(0), -- none of the following
on(1) -- Alarm ON
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The SYncLostAlarm."
::= { baseband 6 }
-- ****** Radio1 *****************************************************
rf1Operation OBJECT-TYPE
SYNTAX INTEGER {
none(0), -- none of the following
booting(1),
ok(2),
testing(3),
error(4),
noDataFromODU(5)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Radio operation."
::= { radio1 1 }
rf1Alarm OBJECT-TYPE
SYNTAX INTEGER {
none(0), -- none of the following
on(1) -- Alarm ON
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The RadioAlarm."
::= { radio1 2 }
rf1Version OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Textual version."
::= { radio1 3 }
rf1Side OBJECT-TYPE
SYNTAX INTEGER {
low(0),
high(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Side."
::= { radio1 4 }
rf1Channel OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Integer variable."
::= { radio1 5 }
rf1TxFrequency OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Textual version."
::= { radio1 6 }
rf1RxFrequency OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Textual version."
::= { radio1 7 }
rf1TxPower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Integer variable."
::= { radio1 8 }
rf1RxState OBJECT-TYPE
SYNTAX INTEGER {
low(0),
ok(1),
error(2),
loopback(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The rx State."
::= { radio1 9 }
rf1RxLevel OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Integer variable."
::= { radio1 10 }
rf1CableAttenuation OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Integer variable."
::= { radio1 11 }
rf1TxOut OBJECT-TYPE
SYNTAX INTEGER {
error(0),
ok(1),
off(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Tx out."
::= { radio1 12 }
rf1TxPLL OBJECT-TYPE
SYNTAX INTEGER {
error(0),
ok(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The txPLL."
::= { radio1 13 }
rf1RxPLL OBJECT-TYPE
SYNTAX INTEGER {
error(0),
ok(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The rxPLL."
::= { radio1 14 }
rf1OduTemperature OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Integer variable."
::= { radio1 15 }
rf1OduHumidity OBJECT-TYPE
SYNTAX INTEGER {
low(0),
high(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The ODU Humidity."
::= { radio1 16 }
rf1Loopback OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Loopback Integer variable."
::= { radio1 17 }
rf1RxAlarmLevel OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Integer variable."
::= { radio1 18 }
-- new 2005.05.17
rf1txfstart OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"Integer variable."
::= { radio1 19 }
rf1duplexshift OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"Integer variable."
::= { radio1 20 }
rf1chstep OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"Integer variable."
::= { radio1 21 }
rf1chstart OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"Integer variable."
::= { radio1 22 }
rf1chend OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"Integer variable."
::= { radio1 23 }
rf1txpwmin OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"Integer variable."
::= { radio1 24 }
rf1txpwmax OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"Integer variable."
::= { radio1 25 }
rf1txpwstep OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"Integer variable."
::= { radio1 26 }
--rf1subbands OBJECT-TYPE
-- SYNTAX INTEGER
-- ACCESS read-only
-- STATUS optional
-- DESCRIPTION
-- "Integer variable."
-- ::= { radio1 27 }
-- ****** Radio2 *****************************************************
rf2Operation OBJECT-TYPE
SYNTAX INTEGER {
none(0), -- none of the following
booting(1),
ok(2),
testing(3),
error(4),
noDataFromODU(5)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Radio operation."
::= { radio2 1 }
rf2Alarm OBJECT-TYPE
SYNTAX INTEGER {
none(0), -- none of the following
on(1) -- Alarm ON
}
ACCESS read-only
STATUS optional
DESCRIPTION
"The RadioAlarm. -> rf1Alarm"
::= { radio2 2 }
rf2Version OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Textual version."
::= { radio2 3 }
rf2Side OBJECT-TYPE
SYNTAX INTEGER {
low(0),
high(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Side."
::= { radio2 4 }
rf2Channel OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Integer variable."
::= { radio2 5 }
rf2TxFrequency OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Textual version."
::= { radio2 6 }
rf2RxFrequency OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Textual version."
::= { radio2 7 }
rf2TxPower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Integer variable."
::= { radio2 8 }
rf2RxState OBJECT-TYPE
SYNTAX INTEGER {
low(0),
ok(1),
error(2),
loopback(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The rx State."
::= { radio2 9 }
rf2RxLevel OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Integer variable."
::= { radio2 10 }
rf2CableAttenuation OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Integer variable."
::= { radio2 11 }
rf2TxOut OBJECT-TYPE
SYNTAX INTEGER {
error(0),
ok(1),
off(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Tx out."
::= { radio2 12 }
rf2TxPLL OBJECT-TYPE
SYNTAX INTEGER {
error(0),
ok(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The txPLL."
::= { radio2 13 }
rf2RxPLL OBJECT-TYPE
SYNTAX INTEGER {
error(0),
ok(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The rxPLL."
::= { radio2 14 }
rf2OduTemperature OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Integer variable."
::= { radio2 15 }
rf2OduHumidity OBJECT-TYPE
SYNTAX INTEGER {
low(0),
high(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The ODU Humidity."
::= { radio2 16 }
rf2Loopback OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Loopback Integer variable."
::= { radio2 17 }
rf2RxAlarmLevel OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Integer variable."
::= { radio2 18 }
-- new 2005.05.17
rf2txfstart OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"Integer variable."
::= { radio2 19 }
rf2duplexshift OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"Integer variable."
::= { radio2 20 }
rf2chstep OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"Integer variable."
::= { radio2 21 }
rf2chstart OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"Integer variable."
::= { radio2 22 }
rf2chend OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"Integer variable."
::= { radio2 23 }
rf2txpwmin OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"Integer variable."
::= { radio2 24 }
rf2txpwmax OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"Integer variable."
::= { radio2 25 }
rf2txpwstep OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"Integer variable."
::= { radio2 26 }
--rf2subbands OBJECT-TYPE
-- SYNTAX INTEGER
-- ACCESS read-only
-- STATUS optional
-- DESCRIPTION
-- "Integer variable."
-- ::= { radio2 27 }
-- switchCtrl ====================
activeLink OBJECT-TYPE
SYNTAX INTEGER {
unknown(0), -- none of the following
link1(1),
link2(2),
error(255)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Integer variable."
::= { switchCtrl 1 }
activeTx OBJECT-TYPE
SYNTAX INTEGER {
none(0), -- none of the following
link1(1),
link2(2),
both(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Integer variable."
::= { switchCtrl 2 }
preferedLink OBJECT-TYPE
SYNTAX INTEGER {
unknown(0), -- none of the following
link1(1),
link2(2),
error(255)
}
ACCESS read-write
STATUS optional
DESCRIPTION
"Integer variable."
::= { switchCtrl 3 }
forcedLink OBJECT-TYPE
SYNTAX INTEGER {
off(0), -- none of the following
link1(1),
link2(2),
error(255)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Integer variable."
::= { switchCtrl 4 }
switchMode OBJECT-TYPE
SYNTAX INTEGER {
unknown(0), -- none of the following
freqDiv(1),
hotStandby(2),
independent(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Integer variable."
::= { switchCtrl 5 }
odu1RxMax OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Integer variable."
::= { switchCtrl 6 }
odu2RxMax OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Integer variable."
::= { switchCtrl 7 }
odu1RxMin OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Integer variable."
::= { switchCtrl 8 }
odu2RxMin OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Integer variable."
::= { switchCtrl 9 }
rxDelta OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Integer variable."
::= { switchCtrl 10 }
rxBER OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Maximum value of allowed BER"
::= { switchCtrl 11 }
switchDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Delay (s)"
::= { switchCtrl 12 }
switchEnabledForRxBer OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Enable/disable swithing for Rx and BER"
::= { switchCtrl 13 }
switchReason OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" 100 - command SWITCH FORCE OFF
101 - command SWITCH FORCE 1
102 - command SWITCH FORCE 2
103 - command SWITCH ACTIVE 1
104 - command SWITCH ACTIVE 2
105 - active ODU changed from 1
to 2 because of power problems in ODU1
106 - active ODU changed from 2
to 2 because of power problems in ODU2
107 - active ODU changed from 1
to 2 because of cable problems in ODU1
108 - active ODU changed from 2
to 1 because of cable problems in ODU2
109 - active ODU changed from 1
to 2 because of SyncLoss problems when active ODU1
110 - active ODU changed from 2
to 1 because of SyncLoss problems when active ODU2
111 - active ODU changed from 1
to 2 because of RAI problems when active ODU1
112 - active ODU changed from 2
to 1 because of RAI problems when active ODU2
113 - active ODU changed from 1
to 2 because of RXLEV problems in ODU1
114 - active ODU changed from 2
to 1 because of RXLEV problems in ODU2
115 - active ODU changed from 1
to 2 because of BER problems when active ODU1
116 - active ODU changed from 2
to 1 because of BER problems when active ODU2"
::= { switchCtrl 14 }
-- ***** modules *********************************************************
-- ****** m1 **************************
m1Type OBJECT-TYPE
SYNTAX INTEGER {
error(0),
e1x1(30),
e1(33),
v35(37),
bridge(43),
eow64(100),
e3(227),
t1x4(74),
e1x4(78),
f1bridge(241),
f2bridge(242),
none(255)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The module type."
::= { m1 1 }
m1Description OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Textual description of the module."
::= { m1 2 }
m1Version OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Module Textual version."
::= { m1 3 }
m1Speed OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Module data speed Integer variable Kbit."
::= { m1 4 }
m1Operation OBJECT-TYPE
SYNTAX INTEGER {
none(0), -- none of the following
booting(1),
ok(2),
testing(3),
loopback(4),
illegalSpeed(5),
error(6)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Module operation statuss."
::= { m1 5 }
m1Rx OBJECT-TYPE
SYNTAX INTEGER {
none(0), -- none of the following
ok(1),
noSignal(2),
noLink(3),
rxAIS(4),
error(5),
noData(6)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Module Rx statuss."
::= { m1 6 }
m1Tx OBJECT-TYPE
SYNTAX INTEGER {
none(0), -- none of the following
ok(1),
noSignal(2),
noLink(3),
txAIS(4),
error(5),
noData(6)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Module Tx statuss."
::= { m1 7 }
m1Loopback OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1),
analog(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Module Loopback Integer variable."
::= { m1 8 }
m1RxInput OBJECT-TYPE
SYNTAX INTEGER {
other(0),
coax(1),
rj45(2),
v35(3),
e3(4),
db25unbalanced(5),
db25balanced(6)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Module Rx Input."
::= { m1 9 }
m1TxMode OBJECT-TYPE
SYNTAX INTEGER {
other(0),
halfDuplex(1),
fullDuplex(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Module Tx duplex mode."
::= { m1 10 }
m1TxClockSource OBJECT-TYPE
SYNTAX INTEGER {
other(0),
master(1),
slave(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Module Tx clock source."
::= { m1 11 }
m1TxClockPhase OBJECT-TYPE
SYNTAX INTEGER {
other(0),
normal(1),
inverse(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Module Tx clock Phase."
::= { m1 12 }
m1DataPolarity OBJECT-TYPE
SYNTAX INTEGER {
other(0),
normal(1),
inverse(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Module data."
::= { m1 13 }
m1ChanCount OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of data channels"
::= { m1 14 }
-- ****** m2 **************************
m2Type OBJECT-TYPE
SYNTAX INTEGER {
error(0),
e1x1(30),
e1(33),
v35(37),
bridge(43),
eow64(100),
e3(227),
t1x4(74),
e1x4(78),
f1bridge(241),
f2bridge(242),
none(255)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The module type."
::= { m2 1 }
m2Description OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Textual description of the module."
::= { m2 2 }
m2Version OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Module Textual version."
::= { m2 3 }
m2Speed OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Module data speed Integer variable Kbit."
::= { m2 4 }
m2Operation OBJECT-TYPE
SYNTAX INTEGER {
none(0), -- none of the following
booting(1),
ok(2),
testing(3),
loopback(4),
illegalSpeed(5),
error(6)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Module operation statuss."
::= { m2 5 }
m2Rx OBJECT-TYPE
SYNTAX INTEGER {
none(0), -- none of the following
ok(1),
noSignal(2),
noLink(3),
rxAIS(4),
error(5),
noData(6)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Module Rx statuss."
::= { m2 6 }
m2Tx OBJECT-TYPE
SYNTAX INTEGER {
none(0), -- none of the following
ok(1),
noSignal(2),
noLink(3),
txAIS(4),
error(5),
noData(6)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Module Tx statuss."
::= { m2 7 }
m2Loopback OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1),
analog(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Loopback Integer variable."
::= { m2 8 }
m2RxInput OBJECT-TYPE
SYNTAX INTEGER {
other(0),
coax(1),
rj45(2),
v35(3),
e3(4),
db25unbalanced(5),
db25balanced(6)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Module Rx Input."
::= { m2 9 }
m2TxMode OBJECT-TYPE
SYNTAX INTEGER {
other(0),
halfDuplex(1),
fullDuplex(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Module Tx duplex mode."
::= { m2 10 }
m2TxClockSource OBJECT-TYPE
SYNTAX INTEGER {
other(0),
master(1),
slave(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Module Tx clock source."
::= { m2 11 }
m2TxClockPhase OBJECT-TYPE
SYNTAX INTEGER {
other(0),
normal(1),
inverse(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Module Tx clock Phase."
::= { m2 12 }
m2DataPolarity OBJECT-TYPE
SYNTAX INTEGER {
other(0),
normal(1),
inverse(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Module data."
::= { m2 13 }
m2ChanCount OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of data channels"
::= { m2 14 }
-- ****** m3 **************************
m3Type OBJECT-TYPE
SYNTAX INTEGER {
error(0),
e1x1(30),
e1(33),
v35(37),
bridge(43),
eow64(100),
e3(227),
t1x4(74),
e1x4(78),
f1bridge(241),
f2bridge(242),
none(255)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The module type."
::= { m3 1 }
m3Description OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Textual description of the module."
::= { m3 2 }
m3Version OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Module Textual version."
::= { m3 3 }
m3Speed OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Module data speed Integer variable Kbit."
::= { m3 4 }
m3Operation OBJECT-TYPE
SYNTAX INTEGER {
none(0), -- none of the following
booting(1),
ok(2),
testing(3),
loopback(4),
illegalSpeed(5),
error(6)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Module operation statuss."
::= { m3 5 }
m3Rx OBJECT-TYPE
SYNTAX INTEGER {
none(0), -- none of the following
ok(1),
noSignal(2),
noLink(3),
rxAIS(4),
error(5),
noData(6)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Module Rx statuss."
::= { m3 6 }
m3Tx OBJECT-TYPE
SYNTAX INTEGER {
none(0), -- none of the following
ok(1),
noSignal(2),
noLink(3),
txAIS(4),
error(5),
noData(6)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Module Tx statuss."
::= { m3 7 }
m3Loopback OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1),
analog(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Loopback Integer variable."
::= { m3 8 }
m3RxInput OBJECT-TYPE
SYNTAX INTEGER {
other(0),
coax(1),
rj45(2),
v35(3),
e3(4),
db25unbalanced(5),
db25balanced(6)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Module Rx Input."
::= { m3 9 }
m3TxMode OBJECT-TYPE
SYNTAX INTEGER {
other(0),
halfDuplex(1),
fullDuplex(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Module Tx duplex mode."
::= { m3 10 }
m3TxClockSource OBJECT-TYPE
SYNTAX INTEGER {
other(0),
master(1),
slave(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Module Tx clock source."
::= { m3 11 }
m3TxClockPhase OBJECT-TYPE
SYNTAX INTEGER {
other(0),
normal(1),
inverse(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Module Tx clock Phase."
::= { m3 12 }
m3DataPolarity OBJECT-TYPE
SYNTAX INTEGER {
other(0),
normal(1),
inverse(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Module data."
::= { m3 13 }
m3ChanCount OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of data channels"
::= { m3 14 }
-- ****** m4 **************************
m4Type OBJECT-TYPE
SYNTAX INTEGER {
error(0),
e1x1(30),
e1(33),
v35(37),
bridge(43),
eow64(100),
e3(227),
t1x4(74),
e1x4(78),
f1bridge(241),
f2bridge(242),
none(255)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The module type."
::= { m4 1 }
m4Description OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Textual description of the module."
::= { m4 2 }
m4Version OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Module Textual version."
::= { m4 3 }
m4Speed OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Module data speed Integer variable Kbit."
::= { m4 4 }
m4Operation OBJECT-TYPE
SYNTAX INTEGER {
none(0), -- none of the following
booting(1),
ok(2),
testing(3),
loopback(4),
illegalSpeed(5),
error(6)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Module operation statuss."
::= { m4 5 }
m4Rx OBJECT-TYPE
SYNTAX INTEGER {
none(0), -- none of the following
ok(1),
noSignal(2),
noLink(3),
rxAIS(4),
error(5),
noData(6)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Module Rx statuss."
::= { m4 6 }
m4Tx OBJECT-TYPE
SYNTAX INTEGER {
none(0), -- none of the following
ok(1),
noSignal(2),
noLink(3),
txAIS(4),
error(5),
noData(6)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Module Tx statuss."
::= { m4 7 }
m4Loopback OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1),
analog(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Loopback Integer variable."
::= { m4 8 }
m4RxInput OBJECT-TYPE
SYNTAX INTEGER {
other(0),
coax(1),
rj45(2),
v35(3),
e3(4),
db25unbalanced(5),
db25balanced(6)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Module Rx Input."
::= { m4 9 }
m4TxMode OBJECT-TYPE
SYNTAX INTEGER {
other(0),
halfDuplex(1),
fullDuplex(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Module Tx duplex mode."
::= { m4 10 }
m4TxClockSource OBJECT-TYPE
SYNTAX INTEGER {
other(0),
master(1),
slave(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Module Tx clock source."
::= { m4 11 }
m4TxClockPhase OBJECT-TYPE
SYNTAX INTEGER {
other(0),
normal(1),
inverse(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Module Tx clock Phase."
::= { m4 12 }
m4DataPolarity OBJECT-TYPE
SYNTAX INTEGER {
other(0),
normal(1),
inverse(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Module data."
::= { m4 13 }
m4ChanCount OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of data channels"
::= { m4 14 }
m1port1 OBJECT IDENTIFIER ::= { m1 21 }
m1port2 OBJECT IDENTIFIER ::= { m1 22 }
m1port3 OBJECT IDENTIFIER ::= { m1 23 }
m1port4 OBJECT IDENTIFIER ::= { m1 24 }
m2port1 OBJECT IDENTIFIER ::= { m2 21 }
m2port2 OBJECT IDENTIFIER ::= { m2 22 }
m2port3 OBJECT IDENTIFIER ::= { m2 23 }
m2port4 OBJECT IDENTIFIER ::= { m2 24 }
m3port1 OBJECT IDENTIFIER ::= { m3 21 }
m3port2 OBJECT IDENTIFIER ::= { m3 22 }
m3port3 OBJECT IDENTIFIER ::= { m3 23 }
m3port4 OBJECT IDENTIFIER ::= { m3 24 }
m4port1 OBJECT IDENTIFIER ::= { m4 21 }
m4port2 OBJECT IDENTIFIER ::= { m4 22 }
m4port3 OBJECT IDENTIFIER ::= { m4 23 }
m4port4 OBJECT IDENTIFIER ::= { m4 24 }
m1p1statbin OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { m1port1 1 }
m1p1connection OBJECT-TYPE
SYNTAX INTEGER {
none(0), -- none of the following
auto(1),
eth10fdx(2),
eth10hdx(3),
eth100fdx(4),
eth100hdx(5),
ds1(6)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Note: ds1 means E1 or T1"
::= { m1port1 2 }
m1p1flowcntrl OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { m1port1 3 }
m1p1priority OBJECT-TYPE
SYNTAX INTEGER {
low(0),
high(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { m1port1 4 }
m1p1loopback OBJECT-TYPE
SYNTAX INTEGER {
off(0),
analog(1),
remote(2),
digital(4),
remoteANDdigital(6)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"loopback"
::= { m1port1 5 }
m1p2statbin OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { m1port2 1 }
m1p2connection OBJECT-TYPE
SYNTAX INTEGER {
none(0), -- none of the following
auto(1),
eth10fdx(2),
eth10hdx(3),
eth100fdx(4),
eth100hdx(5),
ds1(6)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Note: ds1 means E1 or T1"
::= { m1port2 2 }
m1p2flowcntrl OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { m1port2 3 }
m1p2priority OBJECT-TYPE
SYNTAX INTEGER {
low(0),
high(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { m1port2 4 }
m1p2loopback OBJECT-TYPE
SYNTAX INTEGER {
off(0),
analog(1),
remote(2),
digital(4),
remoteANDdigital(6)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"loopback"
::= { m1port2 5 }
m1p3statbin OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { m1port3 1 }
m1p3connection OBJECT-TYPE
SYNTAX INTEGER {
none(0), -- none of the following
auto(1),
eth10fdx(2),
eth10hdx(3),
eth100fdx(4),
eth100hdx(5),
ds1(6)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Note: ds1 means E1 or T1"
::= { m1port3 2 }
m1p3flowcntrl OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { m1port3 3 }
m1p3priority OBJECT-TYPE
SYNTAX INTEGER {
low(0),
high(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { m1port3 4 }
m1p3loopback OBJECT-TYPE
SYNTAX INTEGER {
off(0),
analog(1),
remote(2),
digital(4),
remoteANDdigital(6)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"loopback"
::= { m1port3 5 }
m1p4statbin OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { m1port4 1 }
m1p4connection OBJECT-TYPE
SYNTAX INTEGER {
none(0), -- none of the following
auto(1),
eth10fdx(2),
eth10hdx(3),
eth100fdx(4),
eth100hdx(5),
ds1(6)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Note: ds1 means E1 or T1"
::= { m1port4 2 }
m1p4flowcntrl OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { m1port4 3 }
m1p4priority OBJECT-TYPE
SYNTAX INTEGER {
low(0),
high(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { m1port4 4 }
m1p4loopback OBJECT-TYPE
SYNTAX INTEGER {
off(0),
analog(1),
remote(2),
digital(4),
remoteANDdigital(6)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"loopback"
::= { m1port4 5 }
m2p1statbin OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { m2port1 1 }
m2p1connection OBJECT-TYPE
SYNTAX INTEGER {
none(0), -- none of the following
auto(1),
eth10fdx(2),
eth10hdx(3),
eth100fdx(4),
eth100hdx(5),
ds1(6)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Note: ds1 means E1 or T1"
::= { m2port1 2 }
m2p1flowcntrl OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { m2port1 3 }
m2p1priority OBJECT-TYPE
SYNTAX INTEGER {
low(0),
high(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { m2port1 4 }
m2p1loopback OBJECT-TYPE
SYNTAX INTEGER {
off(0),
analog(1),
remote(2),
digital(4),
remoteANDdigital(6)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"loopback"
::= { m2port1 5 }
m2p2statbin OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { m2port2 1 }
m2p2connection OBJECT-TYPE
SYNTAX INTEGER {
none(0), -- none of the following
auto(1),
eth10fdx(2),
eth10hdx(3),
eth100fdx(4),
eth100hdx(5),
ds1(6)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Note: ds1 means E1 or T1"
::= { m2port2 2 }
m2p2flowcntrl OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { m2port2 3 }
m2p2priority OBJECT-TYPE
SYNTAX INTEGER {
low(0),
high(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { m2port2 4 }
m2p2loopback OBJECT-TYPE
SYNTAX INTEGER {
off(0),
analog(1),
remote(2),
digital(4),
remoteANDdigital(6)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"loopback"
::= { m2port2 5 }
m2p3statbin OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { m2port3 1 }
m2p3connection OBJECT-TYPE
SYNTAX INTEGER {
none(0), -- none of the following
auto(1),
eth10fdx(2),
eth10hdx(3),
eth100fdx(4),
eth100hdx(5),
ds1(6)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Note: ds1 means E1 or T1"
::= { m2port3 2 }
m2p3flowcntrl OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { m2port3 3 }
m2p3priority OBJECT-TYPE
SYNTAX INTEGER {
low(0),
high(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { m2port3 4 }
m2p3loopback OBJECT-TYPE
SYNTAX INTEGER {
off(0),
analog(1),
remote(2),
digital(4),
remoteANDdigital(6)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"loopback"
::= { m2port3 5 }
m2p4statbin OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { m2port4 1 }
m2p4connection OBJECT-TYPE
SYNTAX INTEGER {
none(0), -- none of the following
auto(1),
eth10fdx(2),
eth10hdx(3),
eth100fdx(4),
eth100hdx(5),
ds1(6)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Note: ds1 means E1 or T1"
::= { m2port4 2 }
m2p4flowcntrl OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { m2port4 3 }
m2p4priority OBJECT-TYPE
SYNTAX INTEGER {
low(0),
high(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { m2port4 4 }
m2p4loopback OBJECT-TYPE
SYNTAX INTEGER {
off(0),
analog(1),
remote(2),
digital(4),
remoteANDdigital(6)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"loopback"
::= { m2port4 5 }
m3p1statbin OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { m3port1 1 }
m3p1connection OBJECT-TYPE
SYNTAX INTEGER {
none(0), -- none of the following
auto(1),
eth10fdx(2),
eth10hdx(3),
eth100fdx(4),
eth100hdx(5),
ds1(6)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Note: ds1 means E1 or T1"
::= { m3port1 2 }
m3p1flowcntrl OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { m3port1 3 }
m3p1priority OBJECT-TYPE
SYNTAX INTEGER {
low(0),
high(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { m3port1 4 }
m3p1loopback OBJECT-TYPE
SYNTAX INTEGER {
off(0),
analog(1),
remote(2),
digital(4),
remoteANDdigital(6)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"loopback"
::= { m3port1 5 }
m3p2statbin OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { m3port2 1 }
m3p2connection OBJECT-TYPE
SYNTAX INTEGER {
none(0), -- none of the following
auto(1),
eth10fdx(2),
eth10hdx(3),
eth100fdx(4),
eth100hdx(5),
ds1(6)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Note: ds1 means E1 or T1"
::= { m3port2 2 }
m3p2flowcntrl OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { m3port2 3 }
m3p2priority OBJECT-TYPE
SYNTAX INTEGER {
low(0),
high(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { m3port2 4 }
m3p2loopback OBJECT-TYPE
SYNTAX INTEGER {
off(0),
analog(1),
remote(2),
digital(4),
remoteANDdigital(6)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"loopback"
::= { m3port2 5 }
m3p3statbin OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { m3port3 1 }
m3p3connection OBJECT-TYPE
SYNTAX INTEGER {
none(0), -- none of the following
auto(1),
eth10fdx(2),
eth10hdx(3),
eth100fdx(4),
eth100hdx(5),
ds1(6)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Note: ds1 means E1 or T1"
::= { m3port3 2 }
m3p3flowcntrl OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { m3port3 3 }
m3p3priority OBJECT-TYPE
SYNTAX INTEGER {
low(0),
high(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { m3port3 4 }
m3p3loopback OBJECT-TYPE
SYNTAX INTEGER {
off(0),
analog(1),
remote(2),
digital(4),
remoteANDdigital(6)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"loopback"
::= { m3port3 5 }
m3p4statbin OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { m3port4 1 }
m3p4connection OBJECT-TYPE
SYNTAX INTEGER {
none(0), -- none of the following
auto(1),
eth10fdx(2),
eth10hdx(3),
eth100fdx(4),
eth100hdx(5),
ds1(6)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Note: ds1 means E1 or T1"
::= { m3port4 2 }
m3p4flowcntrl OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { m3port4 3 }
m3p4priority OBJECT-TYPE
SYNTAX INTEGER {
low(0),
high(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { m3port4 4 }
m3p4loopback OBJECT-TYPE
SYNTAX INTEGER {
off(0),
analog(1),
remote(2),
digital(4),
remoteANDdigital(6)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"loopback"
::= { m3port4 5 }
m4p1statbin OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { m4port1 1 }
m4p1connection OBJECT-TYPE
SYNTAX INTEGER {
none(0), -- none of the following
auto(1),
eth10fdx(2),
eth10hdx(3),
eth100fdx(4),
eth100hdx(5),
ds1(6)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Note: ds1 means E1 or T1"
::= { m4port1 2 }
m4p1flowcntrl OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { m4port1 3 }
m4p1priority OBJECT-TYPE
SYNTAX INTEGER {
low(0),
high(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { m4port1 4 }
m4p1loopback OBJECT-TYPE
SYNTAX INTEGER {
off(0),
analog(1),
remote(2),
digital(4),
remoteANDdigital(6)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"loopback"
::= { m4port1 5 }
m4p2statbin OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { m4port2 1 }
m4p2connection OBJECT-TYPE
SYNTAX INTEGER {
none(0), -- none of the following
auto(1),
eth10fdx(2),
eth10hdx(3),
eth100fdx(4),
eth100hdx(5),
ds1(6)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Note: ds1 means E1 or T1"
::= { m4port2 2 }
m4p2flowcntrl OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { m4port2 3 }
m4p2priority OBJECT-TYPE
SYNTAX INTEGER {
low(0),
high(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { m4port2 4 }
m4p2loopback OBJECT-TYPE
SYNTAX INTEGER {
off(0),
analog(1),
remote(2),
digital(4),
remoteANDdigital(6)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"loopback"
::= { m4port2 5 }
m4p3statbin OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { m4port3 1 }
m4p3connection OBJECT-TYPE
SYNTAX INTEGER {
none(0), -- none of the following
auto(1),
eth10fdx(2),
eth10hdx(3),
eth100fdx(4),
eth100hdx(5),
ds1(6)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Note: ds1 means E1 or T1"
::= { m4port3 2 }
m4p3flowcntrl OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { m4port3 3 }
m4p3priority OBJECT-TYPE
SYNTAX INTEGER {
low(0),
high(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { m4port3 4 }
m4p3loopback OBJECT-TYPE
SYNTAX INTEGER {
off(0),
analog(1),
remote(2),
digital(4),
remoteANDdigital(6)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"loopback"
::= { m4port3 5 }
m4p4statbin OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { m4port4 1 }
m4p4connection OBJECT-TYPE
SYNTAX INTEGER {
none(0), -- none of the following
auto(1),
eth10fdx(2),
eth10hdx(3),
eth100fdx(4),
eth100hdx(5),
ds1(6)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Note: ds1 means E1 or T1"
::= { m4port4 2 }
m4p4flowcntrl OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { m4port4 3 }
m4p4priority OBJECT-TYPE
SYNTAX INTEGER {
low(0),
high(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { m4port4 4 }
m4p4loopback OBJECT-TYPE
SYNTAX INTEGER {
off(0),
analog(1),
remote(2),
digital(4),
remoteANDdigital(6)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"loopback"
::= { m4port4 5 }
--mpmux ==================================================================
alarmTrap TRAP-TYPE
ENTERPRISE mpmux
VARIABLES
{
rfAlarm,
bbSyncLostAlarm,
berAlarm,
remoteAlarm,
systemAlarm
}
DESCRIPTION
"SAF management Alarm trap."
::= 0
alinkTrap TRAP-TYPE
ENTERPRISE mpmux
VARIABLES
{
activeLink
}
DESCRIPTION
"SAF Active Link trap."
::= 1
END
Reference in New Issue Copy Permalink