mibs/MIBS/sagemcom/SESSION-MIB

--*******************************************************************
--*    SAGEM, IONOS													*
--*******************************************************************
--*******************************************************************

--  Filename: session
--
--  File type: .mib    
-- 
--  Description:	SNMP source Mib file.
--
--			Gives information about a way to handle access 
--			conflicts between several applications 
--			(SNMP, HTTP, CLI, vt100) that could try to modify 
--			the equipment configuration at the same time and 
--			session inactivity.
--             
--
--  Version:  19 11 2002
--	
--  Date(DD MM YYYY): 15 11 02 last update for IONOS NMS 
--     
--  Contact: D. Mobuchon, F. Bonnevialle
--
--  History: 
--		Version: MIB-P0-301199	Date: 30 11 1999 
--      
--		Name: F.Bonnevialle	
--		Date: 30 11 1999 
--		Desc: original
--
--		Name: F.Bonnevialle 	
--		Date: 11 06 2002
--		Desc: New variable: savePending
--  
--		Name: F.Bonnevialle 	
--		Date: 15 11 2002 		
--		Desc: Modification for SilverCreek Compiler
--*******************************************************************
--*******************************************************************
--*   Copyright (c) 2002, SAGEM , All rights reserved.              *
--*******************************************************************




--*******************************************************************
-- MIB: SESSION-MIB
--*******************************************************************
SESSION-MIB DEFINITIONS ::= BEGIN


--*******************************************************************
-- IMPORTS
--*******************************************************************
IMPORTS
   sagemDr							FROM SAGEM-DR-MIB
-- CommunityAccessList					FROM SAGEM-DR-MIB     
   SagemBoolean						FROM EQUIPMENT-MIB
   MODULE-IDENTITY,OBJECT-TYPE,IpAddress        FROM SNMPv2-SMI;
--   DisplayString                              FROM RFC1213-MIB;


--*******************************************************************
-- OBJECTS
--*******************************************************************
   session	MODULE-IDENTITY
      LAST-UPDATED "0206110000Z"
      ORGANIZATION "SAGEM/DR Tolbiac Centre"
      CONTACT-INFO
	""
      DESCRIPTION 
	"
	Modification:
			Date: 20 12 1999
			Description: modification of comments

			Name: sessionTrap
			Description: sessionTrap and sessionReason are 
				no more used in SESSION-MIB. They have been 
				replaced by a logTrap (see LOG-MIB)
	New Object:
			Date: 19 11 1999 
			Name: tInactivity
			Description: 
			Name: sessionType
			Description: Add of tpiEmulated

	Creation: 
			Description:
			This MIB module gives information about a way to 
			handle access conflicts between several 
			applications (SNMP, HTTP, CLI, vt100) 
			that could try to modify the equipment 
			configuration at the same time
	"
      ::= { sagemDr 201 }


--*******************************************************************
-- Description:
--
--     Manager or Configurator write session (1 session max at 
--	 the same time)
   
   tLock   OBJECT-TYPE
      SYNTAX       INTEGER (0..30)
      MAX-ACCESS   read-write
      STATUS       current
      DESCRIPTION 
      "	
	Number of minutes for which a write session is active on 
	the equipment.
	When the value of this variable is 0, the equipment is not 
	locked.	
	When a SNMP manager (iONOSANMSupervisor and Operator) start 
	a write session, tLock can be set to a value by the manager 
	(up to 30 minutes, so it has time to configure the equipment).	
	Each time an action is done under the equipment tLock is set 
	again to its value.
	tLock is a decremental counter; when the value of tLock return 
	to 0, the write session is ended and the equipment is unlocked.
	The SNMP manager can choose to unlock the equipment by setting 
	the value of tLock to 0 before it reach this value itself.
	"  
      ::= { session 1 } 
   

   sessionIp   OBJECT-TYPE
      SYNTAX       IpAddress 
      MAX-ACCESS   read-only
      STATUS       current
      DESCRIPTION 
      "IP address of the application that holds the session"  
      ::= { session 2 } 

   sessionType   OBJECT-TYPE
      SYNTAX       INTEGER { none (0),snmp (1), http (2), telnet (3), 
						vt100 (4), tpiEmulated (5) }
      MAX-ACCESS   read-only
      STATUS       current
      DESCRIPTION 
	  "Type of the application protocol that holds the session"
      ::= { session 3 }


   tLockDefault   OBJECT-TYPE
      SYNTAX       INTEGER (0..20)
      MAX-ACCESS   read-write
      STATUS       current
      DESCRIPTION 
      "
	tLockDefault is used to define initial value of tLock.
	tLockDefault can be changed only by iONOSANMSupervisor or 
      by dIRECTACCESSsupervisor.
	The normal value is 10 minutes"	
      ::= { session 5 } 


--*******************************************************************
-- Description:
-- 	Manager or Configurator read/write inactivity 
--	(n session at the same time)

   tInactivity   OBJECT-TYPE
      SYNTAX       INTEGER (0..60)
      MAX-ACCESS   read-write
      STATUS       current
      DESCRIPTION 
      "
	The normal configuration is tInactivity > tLock; 
	tInactivityDefault is about 30 min.
	The session with a manager is closed by the equipment if there
	is no activity during tInactivity min.
	It is not used with SNMP.
	This is used to protect the acces to the manager when the 
	operator is not there during a long time.
	"  
     ::= { session 6 } 

-- P0: sessionName,sessionCommunity not used.
--   sessionName   OBJECT-TYPE
--    SYNTAX       DisplayString (SIZE (0..20))
--    MAX-ACCESS   read-only
--      STATUS       current
--      DESCRIPTION 
--	"Login name used for the session"  
--     ::= { session 10 }    

--   sessionCommunity   OBJECT-TYPE
--      SYNTAX       CommunityAccessList
--      MAX-ACCESS   read-only
--      STATUS       current
--      DESCRIPTION 
--	"Access community (User rights) used for the session"  
--      ::= { session 11 }  
  
   savePending   OBJECT-TYPE
      SYNTAX       SagemBoolean
      MAX-ACCESS   read-only
      STATUS       current
      DESCRIPTION 
      "
	  Return TRUE if the write session is unlocked for more than 30 seconds
	  "  
     ::= { session 20 } 

--*******************************************************************

	  
END