mibs/MIBS/screenos/NETSCREEN-SET-LOG-MIB

-- This module defines enterprise MIBs for syslog setting
-- 
-- Copyright (c) 1999-2004, Juniper Networks, Inc.
-- All rights reserved.

NETSCREEN-SET-LOG-MIB DEFINITIONS ::= BEGIN

IMPORTS
    netscreenSetting, netscreenSettingMibModule
        FROM NETSCREEN-SMI
    Integer32, MODULE-IDENTITY, OBJECT-TYPE
        FROM SNMPv2-SMI
    DisplayString
        FROM SNMPv2-TC
    ;

netscreenSetLogMibModule MODULE-IDENTITY
    LAST-UPDATED  "200405032022Z" -- May 03, 2004
    ORGANIZATION
        "Juniper Networks, Inc."
    CONTACT-INFO
        "Customer Support

         1194 North Mathilda Avenue 
         Sunnyvale, California 94089-1206
         USA

         Tel: 1-800-638-8296
         E-mail: customerservice@juniper.net
         HTTP://www.juniper.net"
    DESCRIPTION
        "This module defines the object that are used to monitor 
         syslog setting"
    REVISION      "200405030000Z" -- May 03, 2004
    DESCRIPTION
        "Modified copyright and contact information"
    REVISION      "200403030000Z" -- March 03, 2004
    DESCRIPTION
        "Converted to SMIv2 by Longview Software"
    REVISION      "200311100000Z" -- November 10, 2003
    DESCRIPTION
        "Correct spelling mistake"
    REVISION      "200109280000Z" -- September 28, 2001
    DESCRIPTION
        "No Comment"
    REVISION      "200105270000Z" -- May 27, 2001
    DESCRIPTION
        "Creation Date"
    ::= { netscreenSettingMibModule 8 }

nsSetLog OBJECT IDENTIFIER ::= { netscreenSetting 8 }

nsSetLogEnable OBJECT-TYPE
    SYNTAX        INTEGER {
        disable(0),
        enabled(1)
    }
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "Enable Syslog messages"
    ::= { nsSetLog 1 }

nsSetLogVPNEnable OBJECT-TYPE
    SYNTAX        INTEGER {
        disable(0),
        enabled(1)
    }
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "Secure syslog message traffic using VPN encryption"
    ::= { nsSetLog 2 }

nsSetLogTraffic OBJECT-TYPE
    SYNTAX        INTEGER {
        disable(0),
        enabled(1)
    }
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "Including traffic log when recording administration log"
    ::= { nsSetLog 3 }

nsSetLogHostName OBJECT-TYPE
    SYNTAX        DisplayString (SIZE(0..32))
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "syslog server name or ip address"
    ::= { nsSetLog 4 }

nsSetLogPort OBJECT-TYPE
    SYNTAX        Integer32
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "syslog server port number"
    ::= { nsSetLog 5 }

nsSetLogSecFacility OBJECT-TYPE
    SYNTAX        INTEGER {
        local0(16),
        local1(17),
        local2(18),
        local3(19),
        local4(20),
        local5(21),
        local6(22),
        local7(23),
        auth-sec(4)
    }
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "Security Facility of syslog server"
    ::= { nsSetLog 6 }

nsSetLogFacility OBJECT-TYPE
    SYNTAX        INTEGER {
        local0(16),
        local1(17),
        local2(18),
        local3(19),
        local4(20),
        lcoal5(21),
        local6(22),
        loca7(23),
        auth-sec(4)
    }
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "Facility of syslog server"
    ::= { nsSetLog 7 }

nsSetLogLevel OBJECT-TYPE
    SYNTAX        INTEGER {
        emergency(0),
        aleart(1),
        critical(2),
        error(3),
        warning(4),
        notice(5),
        info(6),
        debug(7)
    }
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "Only log messages with a priority level of
         EMERGENCY/ALERT/CRITICAL/ERROR/WARNING/NOTICE/INFO/DEBUG or
         higher"
    ::= { nsSetLog 8 }

nsSetLogWebTrendsEnable OBJECT-TYPE
    SYNTAX        INTEGER {
        disable(0),
        enabled(1)
    }
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "Enable WebTrends Firewall syslog report."
    ::= { nsSetLog 9 }

nsSetLogWebTrendsVPNEnable OBJECT-TYPE
    SYNTAX        INTEGER {
        disable(0),
        enabled(1)
    }
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "Secure WebTrends message via VPN encryption"
    ::= { nsSetLog 10 }

nsSetLogWebTrendsHostName OBJECT-TYPE
    SYNTAX        DisplayString (SIZE(0..32))
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "WebTrends Host Name"
    ::= { nsSetLog 11 }

nsSetLogWebTrendsPort OBJECT-TYPE
    SYNTAX        Integer32
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "WebTrends Host Port"
    ::= { nsSetLog 12 }

END