538 lines
14 KiB
Plaintext
538 lines
14 KiB
Plaintext
|
-- This module defines enterprise MIBs for VPN tunnel monitoring
|
||
|
|
--
|
||
|
|
-- Copyright (c) 1999-2004, Juniper Networks, Inc.
|
||
|
|
-- All rights reserved.
|
||
|
|
|
||
|
|
NETSCREEN-VPN-MON-MIB DEFINITIONS ::= BEGIN
|
||
|
|
|
||
|
|
IMPORTS
|
||
|
|
netscreenVpn, netscreenVpnMibModule
|
||
|
|
FROM NETSCREEN-SMI
|
||
|
|
Counter32, Integer32, IpAddress, MODULE-IDENTITY, OBJECT-TYPE,
|
||
|
|
TimeTicks
|
||
|
|
FROM SNMPv2-SMI
|
||
|
|
DisplayString
|
||
|
|
FROM SNMPv2-TC
|
||
|
|
;
|
||
|
|
|
||
|
|
netscreenVpnMonMibModule MODULE-IDENTITY
|
||
|
|
LAST-UPDATED "200405032022Z" -- May 03, 2004
|
||
|
|
ORGANIZATION
|
||
|
|
"Juniper Networks, Inc."
|
||
|
|
CONTACT-INFO
|
||
|
|
"Customer Support
|
||
|
|
|
||
|
|
1194 North Mathilda Avenue
|
||
|
|
Sunnyvale, California 94089-1206
|
||
|
|
USA
|
||
|
|
|
||
|
|
Tel: 1-800-638-8296
|
||
|
|
E-mail: customerservice@juniper.net
|
||
|
|
HTTP://www.juniper.net"
|
||
|
|
DESCRIPTION
|
||
|
|
"This module defines the object that are used to monitor VPN
|
||
|
|
tunnels"
|
||
|
|
REVISION "200405030000Z" -- May 03, 2004
|
||
|
|
DESCRIPTION
|
||
|
|
"Modified copyright and contact information"
|
||
|
|
REVISION "200403030000Z" -- March 03, 2004
|
||
|
|
DESCRIPTION
|
||
|
|
"Converted to SMIv2 by Longview Software"
|
||
|
|
REVISION "200311130000Z" -- November 13, 2003
|
||
|
|
DESCRIPTION
|
||
|
|
"Correct spelling mistake"
|
||
|
|
REVISION "200109280000Z" -- September 28, 2001
|
||
|
|
DESCRIPTION
|
||
|
|
"no comment"
|
||
|
|
REVISION "200008270000Z" -- August 27, 2000
|
||
|
|
DESCRIPTION
|
||
|
|
"Creation Date"
|
||
|
|
::= { netscreenVpnMibModule 1 }
|
||
|
|
|
||
|
|
NsVpnMonEntry ::= SEQUENCE
|
||
|
|
{
|
||
|
|
nsVpnMonIndex Integer32,
|
||
|
|
nsVpnMonInPlyId Integer32,
|
||
|
|
nsVpnMonOutPlyId Integer32,
|
||
|
|
nsVpnMonVpnName DisplayString,
|
||
|
|
nsVpnMonVsysName DisplayString,
|
||
|
|
nsVpnMonTunnelType INTEGER,
|
||
|
|
nsVpnMonEspEncAlg INTEGER,
|
||
|
|
nsVpnMonEspAuthAlg INTEGER,
|
||
|
|
nsVpnMonAhAlg INTEGER,
|
||
|
|
nsVpnMonKeyType INTEGER,
|
||
|
|
nsVpnMonP1Auth INTEGER,
|
||
|
|
nsVpnMonVpnType INTEGER,
|
||
|
|
nsVpnMonRmtGwIp IpAddress,
|
||
|
|
nsVpnMonRmtGwId DisplayString,
|
||
|
|
nsVpnMonMyGwIp IpAddress,
|
||
|
|
nsVpnMonMyGwId DisplayString,
|
||
|
|
nsVpnMonOutSpi Integer32,
|
||
|
|
nsVpnMonInSpi Integer32,
|
||
|
|
nsVpnMonMonState INTEGER,
|
||
|
|
nsVpnMonTunnelState INTEGER,
|
||
|
|
nsVpnMonP1State INTEGER,
|
||
|
|
nsVpnMonP1LifeTime Integer32,
|
||
|
|
nsVpnMonP2State INTEGER,
|
||
|
|
nsVpnMonP2LifeTime Integer32,
|
||
|
|
nsVpnMonP2LifeBytes Integer32,
|
||
|
|
nsVpnMonDelayAvg Integer32,
|
||
|
|
nsVpnMonDelayLast Integer32,
|
||
|
|
nsVpnMonAvail Integer32,
|
||
|
|
nsVpnMonSaId Integer32,
|
||
|
|
nsVpnMonGroupId Integer32,
|
||
|
|
nsVpnMonUsrId Integer32,
|
||
|
|
nsVpnMonStartSessRequestTime TimeTicks,
|
||
|
|
nsVpnMonStartSessEstTime TimeTicks,
|
||
|
|
nsVpnMonEndSessTime TimeTicks,
|
||
|
|
nsVpnMonBytesIn Counter32,
|
||
|
|
nsVpnMonBytesOut Counter32,
|
||
|
|
nsVpnMonPacketsIn Counter32,
|
||
|
|
nsVpnMonPacketsOut Counter32,
|
||
|
|
nsVpnMonIfIndex Integer32,
|
||
|
|
nsVpnMonUpdateTime TimeTicks,
|
||
|
|
nsVpnMonDN DisplayString,
|
||
|
|
nsVpnMonIfInfo Integer32
|
||
|
|
}
|
||
|
|
|
||
|
|
netscreenVpnMon OBJECT IDENTIFIER ::= { netscreenVpn 1 }
|
||
|
|
|
||
|
|
nsVpnMonTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF NsVpnMonEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A list of active VPN tunnel entries."
|
||
|
|
::= { netscreenVpnMon 1 }
|
||
|
|
|
||
|
|
nsVpnMonEntry OBJECT-TYPE
|
||
|
|
SYNTAX NsVpnMonEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A VPN tunnel entry containing attributes for both IKE Phase 1
|
||
|
|
and Phase 2 as well as associated policy"
|
||
|
|
INDEX
|
||
|
|
{ nsVpnMonIndex }
|
||
|
|
::= { nsVpnMonTable 1 }
|
||
|
|
|
||
|
|
nsVpnMonIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..2147483647)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A unique value for each active VPN tunnel. Its value ranges
|
||
|
|
between 1 and 65535 and may not be contiguous. Due to the
|
||
|
|
dynamic nature of active VPN tunnels, the index has no other
|
||
|
|
meaning but a pure index"
|
||
|
|
::= { nsVpnMonEntry 1 }
|
||
|
|
|
||
|
|
nsVpnMonInPlyId OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The incoming policy ID for which this tunnel is created for.
|
||
|
|
-1 means no policy associates with this SA."
|
||
|
|
::= { nsVpnMonEntry 2 }
|
||
|
|
|
||
|
|
nsVpnMonOutPlyId OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The outgoing policy ID for which this tunnel is created for.
|
||
|
|
-1 means no policy associates with this SA."
|
||
|
|
::= { nsVpnMonEntry 3 }
|
||
|
|
|
||
|
|
nsVpnMonVpnName OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..32))
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A textual string contains information about the VPN entity
|
||
|
|
from which this tunnel was derived."
|
||
|
|
::= { nsVpnMonEntry 4 }
|
||
|
|
|
||
|
|
nsVpnMonVsysName OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..32))
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A textual string contains the Virtual system to which this
|
||
|
|
tunnel belongs."
|
||
|
|
::= { nsVpnMonEntry 5 }
|
||
|
|
|
||
|
|
nsVpnMonTunnelType OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
reserved(0),
|
||
|
|
proto-isakmp(1),
|
||
|
|
proto-ipsec-ah(2),
|
||
|
|
proto-ipsec-esp(3),
|
||
|
|
proto-ipcomp(4)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Protocol type used for the tunnel"
|
||
|
|
::= { nsVpnMonEntry 6 }
|
||
|
|
|
||
|
|
nsVpnMonEspEncAlg OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
reserved(0),
|
||
|
|
esp-des-iv64(1),
|
||
|
|
esp-des(2),
|
||
|
|
esp-3des(3),
|
||
|
|
esp-rc5(4),
|
||
|
|
esp-idea(5),
|
||
|
|
esp-cast(6),
|
||
|
|
esp-blowfish(7),
|
||
|
|
esp-3idea(8),
|
||
|
|
esp-des-iv32(9),
|
||
|
|
esp-rc4(10),
|
||
|
|
esp-null(11),
|
||
|
|
esp-aes(12),
|
||
|
|
esp-aes192(20),
|
||
|
|
esp-aes256(21)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"a value which identifies a particular algorithm to be used to
|
||
|
|
provide secrecy protection for ESP."
|
||
|
|
::= { nsVpnMonEntry 7 }
|
||
|
|
|
||
|
|
nsVpnMonEspAuthAlg OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
reserved(0),
|
||
|
|
hmac-md5(1),
|
||
|
|
hmac-sha(2),
|
||
|
|
des-mac(3),
|
||
|
|
ipdk(4)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The ESP Authentication Algorithm used in the IPsec."
|
||
|
|
::= { nsVpnMonEntry 8 }
|
||
|
|
|
||
|
|
nsVpnMonAhAlg OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
reserved(0),
|
||
|
|
ah-md5(2),
|
||
|
|
ah-sha(3),
|
||
|
|
ah-des(4)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"a value which identifies a particular algorithm to be used to
|
||
|
|
provide integrity protection for AH."
|
||
|
|
::= { nsVpnMonEntry 9 }
|
||
|
|
|
||
|
|
nsVpnMonKeyType OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
manual(0),
|
||
|
|
auto-ike(1)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"a value which identifies a key exchange protocol to be used
|
||
|
|
for the negotiation"
|
||
|
|
::= { nsVpnMonEntry 10 }
|
||
|
|
|
||
|
|
nsVpnMonP1Auth OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
unused(0),
|
||
|
|
preshared-key(1),
|
||
|
|
dss-Signature(2),
|
||
|
|
rsa-Signature(3),
|
||
|
|
rsa-Encryption1(4),
|
||
|
|
rsa-Encryption2(5)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"a value which identifies Phase 1 authentication method"
|
||
|
|
::= { nsVpnMonEntry 11 }
|
||
|
|
|
||
|
|
nsVpnMonVpnType OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
reserved(0),
|
||
|
|
dialup(1),
|
||
|
|
site-to-site(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The type of this VPN tunnel, either a dialup or site-to-site"
|
||
|
|
::= { nsVpnMonEntry 12 }
|
||
|
|
|
||
|
|
nsVpnMonRmtGwIp OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The peer Gateway's IP address"
|
||
|
|
::= { nsVpnMonEntry 13 }
|
||
|
|
|
||
|
|
nsVpnMonRmtGwId OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The peer Gateway's ID"
|
||
|
|
::= { nsVpnMonEntry 14 }
|
||
|
|
|
||
|
|
nsVpnMonMyGwIp OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The local Gateway's IP address"
|
||
|
|
::= { nsVpnMonEntry 15 }
|
||
|
|
|
||
|
|
nsVpnMonMyGwId OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The local Gateway's ID"
|
||
|
|
::= { nsVpnMonEntry 16 }
|
||
|
|
|
||
|
|
nsVpnMonOutSpi OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The SPI for outgoing packets"
|
||
|
|
::= { nsVpnMonEntry 17 }
|
||
|
|
|
||
|
|
nsVpnMonInSpi OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The SPI for incoming packets"
|
||
|
|
::= { nsVpnMonEntry 18 }
|
||
|
|
|
||
|
|
nsVpnMonMonState OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
off(0),
|
||
|
|
on(1)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The monitoring status, if it is on, an icmp ping will be sent
|
||
|
|
over the tunnel periodically to test the connectivity and
|
||
|
|
latency"
|
||
|
|
::= { nsVpnMonEntry 19 }
|
||
|
|
|
||
|
|
nsVpnMonTunnelState OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
down(0),
|
||
|
|
up(1)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The current tunnel status determined by the icmp ping if The
|
||
|
|
monitoring status is on."
|
||
|
|
::= { nsVpnMonEntry 20 }
|
||
|
|
|
||
|
|
nsVpnMonP1State OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
inactive(0),
|
||
|
|
active(1)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The IKE's Phase 1 status"
|
||
|
|
::= { nsVpnMonEntry 21 }
|
||
|
|
|
||
|
|
nsVpnMonP1LifeTime OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"an active Phase 1 sa's time left before re-key. -1 means
|
||
|
|
unlimited lifetime."
|
||
|
|
::= { nsVpnMonEntry 22 }
|
||
|
|
|
||
|
|
nsVpnMonP2State OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
inactive(0),
|
||
|
|
active(1)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The IKE's Phase 2 status"
|
||
|
|
::= { nsVpnMonEntry 23 }
|
||
|
|
|
||
|
|
nsVpnMonP2LifeTime OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"an active Phase 2 sa's time left before re-key. -1 means
|
||
|
|
unlimited life time."
|
||
|
|
::= { nsVpnMonEntry 24 }
|
||
|
|
|
||
|
|
nsVpnMonP2LifeBytes OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"an active Phase 2 sa's bytes left before re-key. -1 means
|
||
|
|
unlimited life bytes."
|
||
|
|
::= { nsVpnMonEntry 25 }
|
||
|
|
|
||
|
|
nsVpnMonDelayAvg OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"a kind of rolling average of latency, in milliseconds. -1 has
|
||
|
|
no meaning here, which means nsVpnMonDelayAvg has not been
|
||
|
|
calculated yet."
|
||
|
|
::= { nsVpnMonEntry 26 }
|
||
|
|
|
||
|
|
nsVpnMonDelayLast OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"latency in last sample, in milliseconds.
|
||
|
|
-1 means either vpn tunnel is inactive or vpn tunnel monitor is
|
||
|
|
not turned on."
|
||
|
|
::= { nsVpnMonEntry 27 }
|
||
|
|
|
||
|
|
nsVpnMonAvail OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"percentage over 30 samples"
|
||
|
|
::= { nsVpnMonEntry 28 }
|
||
|
|
|
||
|
|
nsVpnMonSaId OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"SA identifier, also used as table index"
|
||
|
|
::= { nsVpnMonEntry 29 }
|
||
|
|
|
||
|
|
nsVpnMonGroupId OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Group Identifier"
|
||
|
|
::= { nsVpnMonEntry 30 }
|
||
|
|
|
||
|
|
nsVpnMonUsrId OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"User Identifier"
|
||
|
|
::= { nsVpnMonEntry 31 }
|
||
|
|
|
||
|
|
nsVpnMonStartSessRequestTime OBJECT-TYPE
|
||
|
|
SYNTAX TimeTicks
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Start Session request timestamp"
|
||
|
|
::= { nsVpnMonEntry 32 }
|
||
|
|
|
||
|
|
nsVpnMonStartSessEstTime OBJECT-TYPE
|
||
|
|
SYNTAX TimeTicks
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Start Session establish timestamp"
|
||
|
|
::= { nsVpnMonEntry 33 }
|
||
|
|
|
||
|
|
nsVpnMonEndSessTime OBJECT-TYPE
|
||
|
|
SYNTAX TimeTicks
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"End Session timestamp [when session terminates]"
|
||
|
|
::= { nsVpnMonEntry 34 }
|
||
|
|
|
||
|
|
nsVpnMonBytesIn OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Incoming bytes through this sa."
|
||
|
|
::= { nsVpnMonEntry 35 }
|
||
|
|
|
||
|
|
nsVpnMonBytesOut OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Outgoing bytes through this sa."
|
||
|
|
::= { nsVpnMonEntry 36 }
|
||
|
|
|
||
|
|
nsVpnMonPacketsIn OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Incoming packets through this sa."
|
||
|
|
::= { nsVpnMonEntry 37 }
|
||
|
|
|
||
|
|
nsVpnMonPacketsOut OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Outgoing packets through this sa."
|
||
|
|
::= { nsVpnMonEntry 38 }
|
||
|
|
|
||
|
|
nsVpnMonIfIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"interface index."
|
||
|
|
::= { nsVpnMonEntry 39 }
|
||
|
|
|
||
|
|
nsVpnMonUpdateTime OBJECT-TYPE
|
||
|
|
SYNTAX TimeTicks
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Timestamp [Whenever any member of the row gets updated, the
|
||
|
|
timestamp is updated]"
|
||
|
|
::= { nsVpnMonEntry 40 }
|
||
|
|
|
||
|
|
nsVpnMonDN OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..64))
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"DN name"
|
||
|
|
::= { nsVpnMonEntry 41 }
|
||
|
|
|
||
|
|
nsVpnMonIfInfo OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..2147483647)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Internal id assigned to this interface. Stays persistent across resets."
|
||
|
|
::= { nsVpnMonEntry 42 }
|
||
|
|
|
||
|
|
END
|
||
|
|
|
||
|
|
|