mibs/MIBS/smartoptics/DCP-LINKVIEW-MIB

--
-- DCP-LINKVIEW-MIB.mib
-- Smartoptics DCP Linkview Enterprise Specific MIB.
--
-- Copyright (c) 2018, Smartoptics
-- All rights reserved
--

DCP-LINKVIEW-MIB DEFINITIONS ::= BEGIN
IMPORTS
    dcpGeneric
        FROM DCP-MIB
    OBJECT-GROUP, MODULE-COMPLIANCE
        FROM SNMPv2-CONF
    Unsigned32, Integer32, Gauge32, OBJECT-TYPE, MODULE-IDENTITY
        FROM SNMPv2-SMI
    DisplayString, TEXTUAL-CONVENTION
        FROM SNMPv2-TC
    OpticalPower1Decimal, InterfaceStatus
        FROM SO-TC-MIB;


-- 1.3.6.1.4.1.30826.2.2.3
dcpLinkview MODULE-IDENTITY 
    LAST-UPDATED "202102251200Z"
    ORGANIZATION "Smartoptics."
    CONTACT-INFO "http://www.smartoptics.com"
    DESCRIPTION "This is the enterprise specific DCP LINKVIEW MIB for Smartoptics"

    REVISION "202102251200Z"      -- February 25.
    DESCRIPTION "Update description for dcpLinkviewLocalPower"

    REVISION "201810081444Z"
    DESCRIPTION "The initial revision"
::= { dcpGeneric 3 }


DcpFiberLoss ::= TEXTUAL-CONVENTION
    DISPLAY-HINT
    "d-1"
    STATUS current
    DESCRIPTION
    "The fiber loss in dB with 1 decimal."
    SYNTAX Unsigned32 (0..1000)


DcpFiberAttenuation ::= TEXTUAL-CONVENTION
    DISPLAY-HINT
    "d-2"
    STATUS current
    DESCRIPTION
    "The fiber attenuation per km with 2 decimals."
    SYNTAX Unsigned32 (0..10)


DcpFiberLength ::= TEXTUAL-CONVENTION
    DISPLAY-HINT
    "d-1"
    STATUS current
    DESCRIPTION
    "The fiber length in km with 1 decimal."
    SYNTAX Unsigned32 (0..500)



--  Node definitions
-- 
-- 1.3.6.1.4.1.30826.2.2.3.1
dcpLinkviewObjects OBJECT IDENTIFIER ::= { dcpLinkview 1 }


-- 1.3.6.1.4.1.30826.2.2.3.1.1
dcpLinkviewTable OBJECT-TYPE
    SYNTAX SEQUENCE OF DcpLinkviewEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
    "Description."
::= { dcpLinkviewObjects 1 }


-- 1.3.6.1.4.1.30826.2.2.3.1.1.1
dcpLinkviewEntry OBJECT-TYPE
    SYNTAX DcpLinkviewEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
    "Description."
INDEX { dcpLinkviewIndex }
::= { dcpLinkviewTable 1 }


DcpLinkviewEntry ::=
    SEQUENCE { 
        dcpLinkviewIndex
        Unsigned32,
        dcpLinkviewLocalHostname
        DisplayString,
        dcpLinkviewLocalName
        DisplayString,
        dcpLinkviewLocalStatus
        InterfaceStatus,
        dcpLinkviewLocalPower
        OpticalPower1Decimal,
        dcpLinkviewFiberLoss
        DcpFiberLoss,
        dcpLinkviewFiberAttenuation
        DcpFiberAttenuation,
        dcpLinkviewFiberLength
        DcpFiberLength,
        dcpLinkviewFiberDispersion
        Unsigned32,
        dcpLinkviewFiberType
        DisplayString,
        dcpLinkviewFiberDispComp
        Integer32,
        dcpLinkviewFiberDispFinal
        Integer32,
        dcpLinkviewFiberUtilization
        Gauge32,
        dcpLinkviewRemotePower
        OpticalPower1Decimal,
        dcpLinkviewRemoteName
        DisplayString,
        dcpLinkviewRemoteHostname
        DisplayString
 }

-- 1.3.6.1.4.1.30826.2.2.3.1.1.1.1
dcpLinkviewIndex OBJECT-TYPE
    SYNTAX Unsigned32 (1..1000000)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
    "Interface Index in the following format:
	csiixy where
	
	c: chassis.
	s: slot number.
	ii: Interface number.
	x: 1 = line, 2 = client.
	y: 0 = tx+rx port, 1 = tx port, 2 = rx port.
	
	For DCP-M products Slot is always 0.
	
	Same Index is used in the IF-MIB."
::= { dcpLinkviewEntry 1 }


-- 1.3.6.1.4.1.30826.2.2.3.1.1.1.2
dcpLinkviewLocalHostname OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The hostname of the local system."
::= { dcpLinkviewEntry 2 }


-- 1.3.6.1.4.1.30826.2.2.3.1.1.1.3
dcpLinkviewLocalName OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The local interface name. If no interface this value is empty.
     if-c/channelid-direction where c = chassis and direction = rx or tx."
::= { dcpLinkviewEntry 3 }


-- 1.3.6.1.4.1.30826.2.2.3.1.1.1.4
dcpLinkviewLocalStatus OBJECT-TYPE
    SYNTAX InterfaceStatus
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The operational state of the local port.

        idle - The port is not activated.

        down - The port traffic is lost.

        up - There is traffic on the port."
::= { dcpLinkviewEntry 4 }


-- 1.3.6.1.4.1.30826.2.2.3.1.1.1.5
dcpLinkviewLocalPower OBJECT-TYPE
    SYNTAX OpticalPower1Decimal
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The optical power present at the line interface, all wavelengths combined in units of 0.1 dBm."
::= { dcpLinkviewEntry 5 }


-- 1.3.6.1.4.1.30826.2.2.3.1.1.1.6
dcpLinkviewFiberLoss OBJECT-TYPE
    SYNTAX DcpFiberLoss
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The fiber loss in units of 0.1 dB."
::= { dcpLinkviewEntry 6 }


-- 1.3.6.1.4.1.30826.2.2.3.1.1.1.7
dcpLinkviewFiberAttenuation OBJECT-TYPE
    SYNTAX DcpFiberAttenuation
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The fiber attenuation in units of 0.01 dB/km."
::= { dcpLinkviewEntry 7 }


-- 1.3.6.1.4.1.30826.2.2.3.1.1.1.8
dcpLinkviewFiberLength OBJECT-TYPE
    SYNTAX DcpFiberLength
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The fiber length in units of 0.1 km."
::= { dcpLinkviewEntry 8 }


-- 1.3.6.1.4.1.30826.2.2.3.1.1.1.9
dcpLinkviewFiberDispersion OBJECT-TYPE
    SYNTAX Unsigned32 (0..10000)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The calculated dispersion based on the measured fiber length in units of 1 ps/nm."
::= { dcpLinkviewEntry 9 }


-- 1.3.6.1.4.1.30826.2.2.3.1.1.1.10
dcpLinkviewFiberType OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The fiber type configured, currently only G.652 is supported."
::= { dcpLinkviewEntry 10 }


-- 1.3.6.1.4.1.30826.2.2.3.1.1.1.11
dcpLinkviewFiberDispComp OBJECT-TYPE
    SYNTAX Integer32 (-10000..10000)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The compensated dispersion value by the system in units of 1 ps/nm."
::= { dcpLinkviewEntry 11 }


-- 1.3.6.1.4.1.30826.2.2.3.1.1.1.12
dcpLinkviewFiberDispFinal OBJECT-TYPE
    SYNTAX Integer32 (-10000..10000)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "Residiual(remaning) dispersion in units of 1 ps/nm."
::= { dcpLinkviewEntry 12 }


-- 1.3.6.1.4.1.30826.2.2.3.1.1.1.13
dcpLinkviewFiberUtilization OBJECT-TYPE
    SYNTAX Gauge32 (0..100)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "Wavelength utilization of the system in units of %."
::= { dcpLinkviewEntry 13 }


-- 1.3.6.1.4.1.30826.2.2.3.1.1.1.14
dcpLinkviewRemotePower OBJECT-TYPE
    SYNTAX OpticalPower1Decimal
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The optical power of the remote interface in units of 0.1 dBm."
::= { dcpLinkviewEntry 14 }


-- 1.3.6.1.4.1.30826.2.2.3.1.1.1.15
dcpLinkviewRemoteName OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The remote interface name. If no interface this value is empty.
     if-c/channelid-direction where c = chassis and direction = rx or tx."
::= { dcpLinkviewEntry 15 }


-- 1.3.6.1.4.1.30826.2.2.3.1.1.1.16
dcpLinkviewRemoteHostname OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The hostname of the remote system."
::= { dcpLinkviewEntry 16 }


-- 1.3.6.1.4.1.30826.2.2.3.2
dcpLinkviewMIBCompliance OBJECT IDENTIFIER ::= { dcpLinkview 2 }

-- 1.3.6.1.4.1.30826.2.2.3.2.1
dcpLinkviewMIBGroups OBJECT IDENTIFIER ::= { dcpLinkviewMIBCompliance 1 }

-- 1.3.6.1.4.1.30826.2.2.3.2.1.1
dcpLinkviewTableGroupV1 OBJECT-GROUP
    OBJECTS { dcpLinkviewLocalHostname, dcpLinkviewLocalName, dcpLinkviewLocalStatus,
              dcpLinkviewLocalPower, dcpLinkviewFiberLoss, dcpLinkviewFiberAttenuation,
              dcpLinkviewFiberLength, dcpLinkviewFiberDispersion, dcpLinkviewFiberType, dcpLinkviewFiberDispComp,
              dcpLinkviewFiberDispFinal, dcpLinkviewFiberUtilization, dcpLinkviewRemotePower,
              dcpLinkviewRemoteName, dcpLinkviewRemoteHostname }
    STATUS current
    DESCRIPTION 
    "The interface table objects V1."
::= { dcpLinkviewMIBGroups 1 }

-- 1.3.6.1.4.1.30826.2.2.3.2.2
dcpLinkviewMIBCompliances OBJECT IDENTIFIER ::= { dcpLinkviewMIBCompliance 2 }

-- 1.3.6.1.4.1.30826.2.2.3.2.2.1
dcpLinkviewBasicComplV1 MODULE-COMPLIANCE
    STATUS      current
    DESCRIPTION
        "Basic implementation requirements for the DCP-INTERFACE-MIB V1."
    MODULE
        MANDATORY-GROUPS {
            dcpLinkviewTableGroupV1 }
    ::= { dcpLinkviewMIBCompliances 1 }


END

--
-- DCP-LINKVIEW-MIB.mib
--