mibs/MIBS/smartoptics/DCP-OCH-MIB

--
-- DCP-OCH-MIB.mib
-- Smartoptics DCP Interface Enterprise Specific MIB.
--
-- Copyright (c) 2021, Smartoptics
-- All rights reserved
--

DCP-OCH-MIB DEFINITIONS ::= BEGIN
IMPORTS
    dcpGeneric
        FROM DCP-MIB
    OBJECT-GROUP, MODULE-COMPLIANCE
        FROM SNMPv2-CONF
    Unsigned32, Gauge32, OBJECT-TYPE, MODULE-IDENTITY
        FROM SNMPv2-SMI
    DisplayString
        FROM SNMPv2-TC
    OpticalPower1Decimal, ItuPerceivedSeverity, InterfaceStatus, DcpTenths, DcpHundreds, OchPortMode
        FROM SO-TC-MIB;

-- 1.3.6.1.4.1.30826.2.2.4
dcpOch MODULE-IDENTITY
    LAST-UPDATED "202103181449Z"
    ORGANIZATION "Smartoptics."
    CONTACT-INFO "http://www.smartoptics.com"
    DESCRIPTION "This is the enterprise specific DCP OCH MIB for Smartoptics"

    REVISION "202103181449Z"
    DESCRIPTION "The initial revision"
::= { dcpGeneric 4 }



--  Node definitions
--
-- 1.3.6.1.4.1.30826.2.2.4.1
dcpOchGeneral OBJECT IDENTIFIER ::= { dcpOch 1 }



-- 1.3.6.1.4.1.30826.2.2.4.1.1
dcpOchGeneralTable OBJECT-TYPE
    SYNTAX SEQUENCE OF OchGeneralEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
    "A table with general information about the och port."
::= { dcpOchGeneral 1 }


-- 1.3.6.1.4.1.30826.2.2.4.1.1.1
dcpOchGeneralEntry OBJECT-TYPE
    SYNTAX OchGeneralEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
    "Description."
INDEX { dcpOchGeneralIndex }
::= { dcpOchGeneralTable 1 }


OchGeneralEntry ::=
    SEQUENCE {
        dcpOchGeneralIndex
        Unsigned32,
        dcpOchGeneralPortName
        DisplayString,
        dcpOchGeneralSpacing
        DcpHundreds,
        dcpOchGeneralMaxChannels
        Unsigned32,
        dcpOchGeneralActiveChannels
        Unsigned32,
        dcpOchGeneralUtilization
        Gauge32,
        dcpOchGeneralConfiguredChannels
        Unsigned32
 }

-- 1.3.6.1.4.1.30826.2.2.4.1.1.1.1
dcpOchGeneralIndex OBJECT-TYPE
    SYNTAX Unsigned32 (1..1000000)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
    "Port Index in the following format:
	ccspp where

	cc: chassis.
	s: slot number.
	pp: port number."
::= { dcpOchGeneralEntry 1 }


-- 1.3.6.1.4.1.30826.2.2.4.1.1.1.2
dcpOchGeneralPortName OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The port name in the following format:
    och-c/s/port where c = chassis, s = slot, port = port name
    or
    ocm-c/s where c = chassis, s = slot"
::= { dcpOchGeneralEntry 2 }


-- 1.3.6.1.4.1.30826.2.2.4.1.1.1.3
dcpOchGeneralSpacing OBJECT-TYPE
    SYNTAX DcpHundreds
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The channel spacing used in units of 0.01 GHz." 
::= { dcpOchGeneralEntry 3 }


-- 1.3.6.1.4.1.30826.2.2.4.1.1.1.4
dcpOchGeneralMaxChannels OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The number of channels that is used for the optical power channel plan for the EDFA."
::= { dcpOchGeneralEntry 4 }


-- 1.3.6.1.4.1.30826.2.2.4.1.1.1.5
dcpOchGeneralActiveChannels OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The number of active channels currently in regulation."
::= { dcpOchGeneralEntry 5 }


-- 1.3.6.1.4.1.30826.2.2.4.1.1.1.6
dcpOchGeneralUtilization OBJECT-TYPE
    SYNTAX Gauge32 (0..100)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The number of channels used in the system in units of %."
::= { dcpOchGeneralEntry 6 }


-- 1.3.6.1.4.1.30826.2.2.4.1.1.1.7
dcpOchGeneralConfiguredChannels OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The number of channels that are enabled."
::= { dcpOchGeneralEntry 7 }



--  Node definitions
--
-- 1.3.6.1.4.1.30826.2.2.4.2
dcpOchObjects OBJECT IDENTIFIER ::= { dcpOch 2 }



-- 1.3.6.1.4.1.30826.2.2.4.2.1
dcpOchTable OBJECT-TYPE
    SYNTAX SEQUENCE OF OchInterfaceEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
    "A table with all optical channels of the system."
::= { dcpOchObjects 1 }


-- 1.3.6.1.4.1.30826.2.2.4.2.1.1
dcpOchEntry OBJECT-TYPE
    SYNTAX OchInterfaceEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
    "Description."
INDEX { dcpOchIndex }
::= { dcpOchTable 1 }


OchInterfaceEntry ::=
    SEQUENCE {
        dcpOchIndex
        Unsigned32,
        dcpOchChannelId
        DisplayString,
        dcpOchRxPower
        DcpTenths,
        dcpOchTxPower
        DcpTenths,
        dcpOchWssAttenuation
        DcpTenths,
        dcpOchWssInsertionLoss
        DcpTenths,
        dcpOchWantedOutputPower
        DcpTenths,
        dcpOchPortMode
        OchPortMode,
        dcpOchStatus
        InterfaceStatus,
        dcpOchDescription
        DisplayString,
        dcpOchAlarm
        ItuPerceivedSeverity
 }

-- 1.3.6.1.4.1.30826.2.2.4.2.1.1.1
dcpOchIndex OBJECT-TYPE
    SYNTAX Unsigned32 (1..1000000)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
    "Och Index in the following format:
	cspoooy where

	c: chassis.
	s: slot number.
	p: port number.
	ooo: Och number.
	y: 0 = tx+rx port, 1 = tx port, 2 = rx port.

	Same Index is used in the IF-MIB."
::= { dcpOchEntry 1 }


-- 1.3.6.1.4.1.30826.2.2.4.2.1.1.2
dcpOchChannelId OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The optical channel id name in the following format:
     och-c/s/p/och where
     c = chassis.
     s = slot number.
     port = edfa or eq.
     och = optical channel."
::= { dcpOchEntry 2 }


-- 1.3.6.1.4.1.30826.2.2.4.2.1.1.3
dcpOchRxPower OBJECT-TYPE
    SYNTAX DcpTenths
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The optical input power for the optical channel in units of 0.1 dBm."
::= { dcpOchEntry 3 }


-- 1.3.6.1.4.1.30826.2.2.4.2.1.1.4
dcpOchTxPower OBJECT-TYPE
    SYNTAX DcpTenths
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The optical output power for the optical channel in units of 0.1 dBm."
::= { dcpOchEntry 4 }


-- 1.3.6.1.4.1.30826.2.2.4.2.1.1.5
dcpOchWssAttenuation OBJECT-TYPE
    SYNTAX DcpTenths
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The WSS attenuation for the optical channel in units of 0.1 dB."
::= { dcpOchEntry 5 }


-- 1.3.6.1.4.1.30826.2.2.4.2.1.1.6
dcpOchWssInsertionLoss OBJECT-TYPE
    SYNTAX DcpTenths
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The calibration value of WSS insertion loss in units of 0.1 dBm."
::= { dcpOchEntry 6 }


-- 1.3.6.1.4.1.30826.2.2.4.2.1.1.7
dcpOchWantedOutputPower OBJECT-TYPE
    SYNTAX DcpTenths
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The wanted optical output power for the optical channel in units of 0.1 dBm."
::= { dcpOchEntry 7 }


-- 1.3.6.1.4.1.30826.2.2.4.2.1.1.8
dcpOchPortMode OBJECT-TYPE
    SYNTAX OchPortMode
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The port mode for the channel. Port mode can be on or off. 
     off - The channel is disabled.
     on - The channel is enabled.
     edfa - The channel is enabled and connected to the edfa port.
     express - The channel is enabled and connected to the express port."
::= { dcpOchEntry 8 }


-- 1.3.6.1.4.1.30826.2.2.4.2.1.1.9
dcpOchStatus OBJECT-TYPE
    SYNTAX InterfaceStatus
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The operational state for a channel.

        idle - The optical channel is not activated.

        down - The optical channel traffic is lost.

        up - There is traffic on the optical channel."
::= { dcpOchEntry 9 }


-- 1.3.6.1.4.1.30826.2.2.4.2.1.1.10
dcpOchDescription OBJECT-TYPE
    SYNTAX DisplayString (SIZE(0..128))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "User configurable description string for the optical channel."
::= { dcpOchEntry 10 }

-- 1.3.6.1.4.1.30826.2.2.4.2.1.1.11
dcpOchAlarm OBJECT-TYPE
    SYNTAX ItuPerceivedSeverity
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The highest alarm severity of the optical channel."
::= { dcpOchEntry 11 }


-- 1.3.6.1.4.1.30826.2.2.4.3
dcpOchMIBCompliance OBJECT IDENTIFIER ::= { dcpOch 3 }

-- 1.3.6.1.4.1.30826.2.2.4.3.1
dcpOchMIBGroups OBJECT IDENTIFIER ::= { dcpOchMIBCompliance 1 }

-- 1.3.6.1.4.1.30826.2.2.4.3.1.1
dcpOchGeneralTableGroupV1 OBJECT-GROUP
    OBJECTS { dcpOchGeneralPortName, dcpOchGeneralSpacing, dcpOchGeneralMaxChannels, dcpOchGeneralActiveChannels,
    dcpOchGeneralUtilization, dcpOchGeneralConfiguredChannels}
    STATUS current
    DESCRIPTION
    "The och general table objects V1."
::= { dcpOchMIBGroups 1 }

-- 1.3.6.1.4.1.30826.2.2.4.3.1.2
dcpOchTableGroupV1 OBJECT-GROUP
    OBJECTS { dcpOchChannelId, dcpOchRxPower, dcpOchTxPower, dcpOchWssAttenuation, dcpOchWssInsertionLoss,
    dcpOchWantedOutputPower, dcpOchPortMode, dcpOchStatus, dcpOchDescription, dcpOchAlarm}
    STATUS current
    DESCRIPTION
    "The och table objects V1."
::= { dcpOchMIBGroups 2 }


-- 1.3.6.1.4.1.30826.2.2.4.3.2
dcpOchMIBCompliances OBJECT IDENTIFIER ::= { dcpOchMIBCompliance 2 }

-- 1.3.6.1.4.1.30826.2.2.4.3.2.1
dcpOchBasicComplV1 MODULE-COMPLIANCE
    STATUS      current
    DESCRIPTION
        "Basic implementation requirements for the DCP-OCH-MIB V1."
    MODULE
        MANDATORY-GROUPS {
                         dcpOchGeneralTableGroupV1,
                         dcpOchTableGroupV1}
    ::= { dcpOchMIBCompliances 1 }


END

--
-- DCP-OCH-MIB.mib
--