mibs/MIBS/tait/TAIT-TN9300-TC

TAIT-TN9300-TC DEFINITIONS ::= BEGIN

--
-- Textual conventions and enumerations for the TN9300 DMR Node
--

IMPORTS

    Integer32, Unsigned32,
    MODULE-IDENTITY        FROM SNMPv2-SMI
    TEXTUAL-CONVENTION     FROM SNMPv2-TC
	taitModules            FROM TAIT-COMMON-MIB;

taittn9300TC MODULE-IDENTITY
   LAST-UPDATED "201812041200Z"
   ORGANIZATION "www.taitworld.com"
   CONTACT-INFO
      "postal:   Tait International Limited
                 558 Wairakei Road
                 Christchurch
                 PO Box 1645
                 Christchurch
                 New Zealand

       phone:    +64 3358 3399
       email:    support@taitworld.com"

   DESCRIPTION  "Textual conventions used in the TN9300 MIB."

   REVISION "201812041200Z"
   DESCRIPTION "Defined the EventSeverity, LicenseValidity, UnitAuthentication, and RemoteNodeSyncState textual conventions."

   REVISION "201807171005Z"
   DESCRIPTION "Changed to Tait International Limited"

   REVISION "201803182203Z"
   DESCRIPTION "Changed naming on new terminal alarm definitions to camel case."

   REVISION "201703160123Z"
   DESCRIPTION "Fixed syntax on new terminal alarm definitions."

   REVISION "201608221200Z"
   DESCRIPTION "Added 3 Terminal alarm descriptions"

   REVISION "201510301200Z"
   DESCRIPTION "Changed some descriptions"

   REVISION "201503172208Z"
   DESCRIPTION "added UnitStatusMessageId enum"

   REVISION "201206270902Z"
   DESCRIPTION "Changed type of the syscode value to string"

   REVISION     "201205282317Z"
   DESCRIPTION
      "Version 1.00.01
       Status  [under review]"
       ::= { taitModules 11 1 }


-- =====================
--
--  Textual Conventions
--
-- =====================

NodeRequestedState ::= TEXTUAL-CONVENTION
   STATUS      current
   DESCRIPTION "The state that a node has been instructed to enter. Status types are: Unknown (0), Offline(1), Program (2), or Online (3)."
   SYNTAX      INTEGER {
            unknown(0),
            offline(1),
            program(2),
            online(3)
            }

NodeState ::= TEXTUAL-CONVENTION
   STATUS      current
   DESCRIPTION "The state in which a node is operating. Status types are Unknown (0), Offline (1), Program (2), Switching (3) or Control (4)."
   SYNTAX      INTEGER {
            unknown(0),
            offline(1),
            program(2),
            switching(3),
            control(4)
            }

NetworkCheckState ::= TEXTUAL-CONVENTION
   STATUS      current
   DESCRIPTION "The status of a network check. Status types are Not Configured (0), OK (1) or Failed (2)."
   SYNTAX      INTEGER {
            notConfigured(0),
            ok(1),
            failed(2)
            }

ChannelState ::= TEXTUAL-CONVENTION
   STATUS      current
   DESCRIPTION "The state in which a channel is operating. Status types are Unknown (0), Disabled (1), Idle (2), Control (3), Traffic (4), Data (5) or Failed (6)."
   SYNTAX      INTEGER {
            unknown(0),
            disabled(1),
            idle(2),
            control(3),
            traffic(4),
            data(5),
            failed(6)
            }

SipLineRegistrationType ::= TEXTUAL-CONVENTION
   STATUS      current
   DESCRIPTION "The types of SIP line registration. Registration types are Unknown (0), Outbound (1), Inbound (2) or AIS (3)."
   SYNTAX      INTEGER {
            unknown(0),
            inbound(1),
            outbound(2),
            ais(3)
            }

SipLineIncomingType ::= TEXTUAL-CONVENTION
   STATUS      current
   DESCRIPTION "The ident of the A party in an incoming phone call. Ident types are Unknown (0), PSTNI (1) or PABXI (2)."
   SYNTAX      INTEGER {
            unknown(0),
            pstni(1),
            pabxi(2)
            }

SipCallSpeechVotingPriority ::= TEXTUAL-CONVENTION
   STATUS      current
   DESCRIPTION "The speech voting priority for SIP calls. Priority types are Unknown (0), Normal (1) or Override (2)."
   SYNTAX      INTEGER {
            unknown(0),
            normal(1),
            override(2)
            }

SipLineState ::= TEXTUAL-CONVENTION
   STATUS      current
   DESCRIPTION "The state in which a SIP line is operating. Status types are Unknown (0), Disabled (1), Up (2) or Down (3)."
   SYNTAX      INTEGER {
            unknown(0),
            disabled(1),
            up(2),
            down(3)
            }

DipLineState ::= TEXTUAL-CONVENTION
   STATUS      current
   DESCRIPTION "The state in which a DIP line is operating. Status types are Unknown (0), Unconfigured (1), Idle (2), Active (3) or Failed (4)."
   SYNTAX      INTEGER {
            unknown(0),
            unconfigured(1),
            idle(2),
            active(3),
            failed(4)
            }

NgwLinkState ::= TEXTUAL-CONVENTION
   STATUS      current
   DESCRIPTION "The state of the link to the network gateway. Status types are Unknown (0), OK (1) or Failed (2)."
   SYNTAX      INTEGER {
            unknown(0),
            ok(1),
            failed(2)
            }

Mpt1327LinkState ::= TEXTUAL-CONVENTION
   STATUS      current
   DESCRIPTION "The state of the link to the MPT gateway. Status types are Unknown (0), OK (1) or Failed (2)."
   SYNTAX      INTEGER {
            unknown(0),
            ok(1),
            failed(2)
            }

Mpt1327ChannelState ::= TEXTUAL-CONVENTION
   STATUS      current
   DESCRIPTION "The state in which an MPT 1327 channel is operating. Status types are Unknown (0), Idle (1), Traffic (2), Control (3) or Failed (4)."
   SYNTAX      INTEGER {
            unknown(0),
            idle(1),
            traffic(2),
            control(3),
            failed(4)
            }

RemoteNodeState ::= TEXTUAL-CONVENTION
   STATUS      current
   DESCRIPTION "The state in which a remote node is operating. Status types are Unknown (0), Offline (1), Program (2), Switching (3), Control (4), Failed (5) or Graceful Shutdown (6)."
   SYNTAX      INTEGER {
            unknown(0),
            offline(1),
            program(2),
            switching(3),
            control(4),
            failed(5),
            gracefulShutdown(6)
            }

UnitStatusMessageId ::= TEXTUAL-CONVENTION
   STATUS      current
   DESCRIPTION "Unit alarm status message IDs:
        PPP link to MPC down (1),
        GPS signal lost (2),
        GPS signal regained (after loss) (3),
        Unit antenna connection failure (VSWR out of range) (4),
        Unit supply voltage out of range (5),
        Unit temperature T0 (normal range) (6),
        Unit temperature T1 (over temp) (7),
        Unit temperature T2 (over temp) (8),
        Unit temperature T3 (over temp) (9),
        Unit loss of service (10),
        Radio frequency out of lock (service regained) (11),
        MCP configuration error (12),
        Unit antenna connection good (13),
        Unit unsolicited reset (14),
        Unit gained service (15)"
   SYNTAX      INTEGER {
        clearAll(0),
        pppLinkToMpcDown(1),
        gpsSignalLost(2),
        gpsSignalRegainedAfterLoss(3),
        terminalAntennaConnectionFailureVswrOutOfRange(4),
        terminalSupplyVoltageOutOfRange(5),
        radioTemperatureT0NormalRange(6),
        radioTemperatureT1OverTemp(7),
        radioTemperatureT2OverTemp(8),
        radioTemperatureT3OverTemp(9),
        terminalLossOfService(10),
        radioFrequencyOutOfLockServiceRegained(11),
        mcpConfigurationError(12),
        terminalAntennaConnectionGood(13),
        terminalUnsolicitedReset(14),
        terminalGainedService(15),
        unknown(128)
        }

EventSeverity ::= TEXTUAL-CONVENTION
   STATUS      current
   DESCRIPTION "The severity of an event. Types are OK (0), Minor (1), or Major (2)."
   SYNTAX      INTEGER {
            ok(0),
            minor(1),
            major(2)
            }

LicenseValidity ::= TEXTUAL-CONVENTION
   STATUS      current
   DESCRIPTION "The current validity of the license. Types are as follows:
                Valid (0),
                File Not Found (1),
                Invalid Host ID (2),
                Invalid Product Code(3),
                Invalid Version (4),
                Invalid Expiry Date (5),
                Expired (6),
                Corrupt Signature (7),
                Conflicting Features (8),
                Invalid Tier Mode (9),
                Invalid License Format (10)"
   SYNTAX      INTEGER {
            valid(0),
            fileNotFound(1),
            invalidHostId(2),
            invalidProductCode(3),
            invalidVersion(4),
            invalidExpiryDate(5),
            expired(6),
            corruptSignature(7),
            conflictingFeatures(8),
            invalidTierMode(9),
            invalidLicenseFormat(10)
            }

UnitAuthentication ::= TEXTUAL-CONVENTION
   STATUS      current
   DESCRIPTION "The authentication state of a unit. Types are as follows:
                Not Polled (0),
                Polling (1),
                Not Home (2),
                Busy (3),
                Bad Authentication (4),
                Bad CRC Received (5),
                Good Authentication Received (6),
                Rejected (7),
                Not Registered (8)"
   SYNTAX      INTEGER {
            notPolled(0),
            polling(1),
            notHome(2),
            busy(3),
            badAuthentication(4),
            badCrcReceived(5),
            goodAuthenticationReceived(6),
            rejected(7),
            notRegistered(8)
            }

RemoteNodeSyncState ::= TEXTUAL-CONVENTION
   STATUS      current
   DESCRIPTION "The state of synchronisation between the control and a remote node. Types are OK (0), Failed (1), Unknown (2), or None (3)."
   SYNTAX      INTEGER {
            ok(0),
            failed(1),
            unknown(2),
            none(3)
            }

END