485 lines
16 KiB
Plaintext
485 lines
16 KiB
Plaintext
|
-- *********************************************************************
|
||
|
|
-- **
|
||
|
|
-- ** BATM Advanced Communications.
|
||
|
|
-- **
|
||
|
|
-- *********************************************************************
|
||
|
|
-- ** Filename: PRVT-MPLS-IF-MIB.mib
|
||
|
|
-- ** Project: T-Metro Switches.
|
||
|
|
-- ** Purpose: Private MIB
|
||
|
|
-- *********************************************************************
|
||
|
|
-- (c) Copyright, 2001, BATM Advanced Communications. All rights reserved.
|
||
|
|
-- WARNING:
|
||
|
|
--
|
||
|
|
-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
|
||
|
|
--
|
||
|
|
-- This file is the property of BATM Advanced Communications and contains
|
||
|
|
-- proprietary and confidential information. This file is made
|
||
|
|
-- available to authorized BATM customers on the express
|
||
|
|
-- condition that neither it, nor any of the information contained
|
||
|
|
-- therein, shall be disclosed to third parties or be used for any
|
||
|
|
-- purpose other than to replace, modify or upgrade firmware and/or
|
||
|
|
-- software components of BATM manufactured equipment within the
|
||
|
|
-- authorized customer's network, and that such transfer be
|
||
|
|
-- completed in accordance with the instructions provided by
|
||
|
|
-- BATM. Any other use is strictly prohibited.
|
||
|
|
--
|
||
|
|
-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
|
||
|
|
-- WARRANTY, THE SOFTWARE PROGRAMS CONTAINED IN THIS FILE ARE
|
||
|
|
-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
|
||
|
|
-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
|
||
|
|
-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
|
||
|
|
--
|
||
|
|
-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
|
||
|
|
-- INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
|
||
|
|
-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
|
||
|
|
-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
|
||
|
|
-- TO USE, THE SOFTWARE CONTAINED IN THIS FILE.
|
||
|
|
--
|
||
|
|
-- ----------------------------------------------------------------------------
|
||
|
|
--
|
||
|
|
PRVT-MPLS-IF-MIB DEFINITIONS ::= BEGIN
|
||
|
|
|
||
|
|
|
||
|
|
IMPORTS
|
||
|
|
MODULE-IDENTITY, OBJECT-TYPE,Integer32, Unsigned32
|
||
|
|
FROM SNMPv2-SMI
|
||
|
|
TEXTUAL-CONVENTION, RowStatus, TruthValue FROM SNMPv2-TC
|
||
|
|
ifIndex,ifEntry
|
||
|
|
FROM IF-MIB
|
||
|
|
InetAddress FROM INET-ADDRESS-MIB
|
||
|
|
mpls FROM PRVT-CR-LDP-MIB;
|
||
|
|
|
||
|
|
|
||
|
|
prvtMPLSIfMib MODULE-IDENTITY
|
||
|
|
LAST-UPDATED "200801010000Z"
|
||
|
|
ORGANIZATION "BATM Advanced Communication"
|
||
|
|
CONTACT-INFO
|
||
|
|
" BATM/Telco Systems Support team
|
||
|
|
Email:
|
||
|
|
For North America: techsupport@telco.com
|
||
|
|
For North Europe: support@batm.de, info@batm.de
|
||
|
|
For the rest of the world: techsupport@telco.com"
|
||
|
|
|
||
|
|
DESCRIPTION
|
||
|
|
"This module includes configuration parameters for MPLS and RSVP interface specific parameters."
|
||
|
|
|
||
|
|
-- revision history
|
||
|
|
REVISION "200801010000Z"
|
||
|
|
DESCRIPTION
|
||
|
|
"Removed redefined OIDs in private vendor extension definitions."
|
||
|
|
REVISION "200701230000Z"
|
||
|
|
DESCRIPTION
|
||
|
|
"Changed ifaceRsvpHelloTolerance, ifaceRsvpHelloPersist to Unsigned32."
|
||
|
|
REVISION "200606270000Z"
|
||
|
|
DESCRIPTION
|
||
|
|
"Changes the ingress and egress label ranges."
|
||
|
|
REVISION "200601080000Z"
|
||
|
|
DESCRIPTION
|
||
|
|
"Added the global label space object and changed augmentation to ifTable."
|
||
|
|
REVISION "200511110000Z"
|
||
|
|
DESCRIPTION
|
||
|
|
"Initial version."
|
||
|
|
|
||
|
|
::= { mpls 6 }
|
||
|
|
|
||
|
|
|
||
|
|
-- --------------------------------------------------------------------
|
||
|
|
-- PRVT-MPLS-MIB organisation
|
||
|
|
-- --------------------------------------------------------------------
|
||
|
|
|
||
|
|
prvtMPLSIfaceObjs OBJECT IDENTIFIER ::= { prvtMPLSIfMib 1}
|
||
|
|
prvtMPLSRouteObjs OBJECT IDENTIFIER ::= { prvtMPLSIfMib 2}
|
||
|
|
|
||
|
|
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
-- Interface objects
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
prvtMplsIfaceTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF PrvtMplsIfaceEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This table contains object for configuring MPLS and LDP interface specific parameters."
|
||
|
|
::= { prvtMPLSIfaceObjs 1 }
|
||
|
|
|
||
|
|
prvtMplsIfaceEntry OBJECT-TYPE
|
||
|
|
SYNTAX PrvtMplsIfaceEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The MPLS/LDP configuration of an IP interface."
|
||
|
|
INDEX { ifIndex }
|
||
|
|
::= { prvtMplsIfaceTable 1 }
|
||
|
|
|
||
|
|
PrvtMplsIfaceEntry ::= SEQUENCE {
|
||
|
|
ifaceMplsEnable TruthValue,
|
||
|
|
ifaceMplsPHPEnable TruthValue,
|
||
|
|
ifaceMplsIngressLblRangeLow Integer32,
|
||
|
|
ifaceMplsIngressLblRangeHigh Integer32,
|
||
|
|
ifaceMplsEgressLblRangeLow Integer32,
|
||
|
|
ifaceMplsEgressLblRangeHigh Integer32,
|
||
|
|
ifaceMplsLdpHelloHoldTimer Integer32,
|
||
|
|
ifaceMplsLdpKeepaliveHoldTimer Integer32,
|
||
|
|
ifaceMplsLdpUseGlobalLabelSpace TruthValue
|
||
|
|
}
|
||
|
|
|
||
|
|
ifaceMplsEnable OBJECT-TYPE
|
||
|
|
SYNTAX TruthValue
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Enable or disable MPLS on this interface."
|
||
|
|
::= { prvtMplsIfaceEntry 1 }
|
||
|
|
|
||
|
|
ifaceMplsPHPEnable OBJECT-TYPE
|
||
|
|
SYNTAX TruthValue
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Enable or disable Penultimate Hop Popping on this interface."
|
||
|
|
::= { prvtMplsIfaceEntry 2 }
|
||
|
|
|
||
|
|
ifaceMplsIngressLblRangeLow OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (32768..131071)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This is the lower border of the Ingress Lable Range for this interface."
|
||
|
|
::= { prvtMplsIfaceEntry 3 }
|
||
|
|
|
||
|
|
ifaceMplsIngressLblRangeHigh OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (32768..131071)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This is the higher border of the Ingress Lable Range for this interface."
|
||
|
|
::= { prvtMplsIfaceEntry 4 }
|
||
|
|
|
||
|
|
ifaceMplsEgressLblRangeLow OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (32768..131071)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This is the lower border of the Egress Lable Range for this interface."
|
||
|
|
::= { prvtMplsIfaceEntry 5 }
|
||
|
|
|
||
|
|
ifaceMplsEgressLblRangeHigh OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (32768..131071)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This is the higher border of the Egress Lable Range for this interface."
|
||
|
|
::= { prvtMplsIfaceEntry 6 }
|
||
|
|
|
||
|
|
ifaceMplsLdpHelloHoldTimer OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..65535)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"LDP Hello Hold Time."
|
||
|
|
::= { prvtMplsIfaceEntry 7 }
|
||
|
|
|
||
|
|
ifaceMplsLdpKeepaliveHoldTimer OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..65535)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"LDP Hello Keep-alive Time."
|
||
|
|
::= { prvtMplsIfaceEntry 8 }
|
||
|
|
|
||
|
|
ifaceMplsLdpUseGlobalLabelSpace OBJECT-TYPE
|
||
|
|
SYNTAX TruthValue
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Default value is true and correct value is true."
|
||
|
|
::= { prvtMplsIfaceEntry 9 }
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
prvtRsvpIfaceTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF PrvtRsvpIfaceEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This table contains object for configuring RSVP interface specific parameters."
|
||
|
|
::= { prvtMPLSIfaceObjs 2 }
|
||
|
|
|
||
|
|
prvtRsvpIfaceEntry OBJECT-TYPE
|
||
|
|
SYNTAX PrvtRsvpIfaceEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The MPLS/LDP configuration of an IP interface."
|
||
|
|
AUGMENTS { ifEntry }
|
||
|
|
::= { prvtRsvpIfaceTable 1 }
|
||
|
|
|
||
|
|
PrvtRsvpIfaceEntry ::= SEQUENCE {
|
||
|
|
ifaceRsvpRefreshInterval Integer32,
|
||
|
|
ifaceRsvpRefreshMultiple Integer32,
|
||
|
|
ifaceRsvpSlewNumerator Integer32,
|
||
|
|
ifaceRsvpSlewDenom Integer32,
|
||
|
|
ifaceRsvpBlockadeMultiple Integer32,
|
||
|
|
ifaceRsvpNotifyRRDecay Integer32,
|
||
|
|
ifaceRsvpNotifyRRInterval Integer32,
|
||
|
|
ifaceRsvpNotifyRRLimit Integer32,
|
||
|
|
ifaceRsvpHelloInterval Integer32,
|
||
|
|
ifaceRsvpHelloDecay Integer32,
|
||
|
|
ifaceRsvpHelloTolerance Unsigned32,
|
||
|
|
ifaceRsvpHelloPersist Unsigned32,
|
||
|
|
ifaceRsvpHelloTTL Integer32
|
||
|
|
|
||
|
|
}
|
||
|
|
|
||
|
|
ifaceRsvpRefreshInterval OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The RSVP value, R, which is used to set the average
|
||
|
|
interval between refresh path and resv messages."
|
||
|
|
::= { prvtRsvpIfaceEntry 1 }
|
||
|
|
|
||
|
|
ifaceRsvpRefreshMultiple OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The RSVP value, K, which is the number of unresponded Path
|
||
|
|
or Resv refresh attempts which must be made, spaced by
|
||
|
|
the refresh interval before the state is deemed to have
|
||
|
|
timed out."
|
||
|
|
::= { prvtRsvpIfaceEntry 2}
|
||
|
|
|
||
|
|
ifaceRsvpSlewNumerator OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..214783647)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The numerator of the fraction, SlewMax, which is the maximum
|
||
|
|
allowable increase in the refresh interval, R, to prevent
|
||
|
|
state timeout while changing R. R is increased by this
|
||
|
|
fraction until it reaches the new desired value."
|
||
|
|
::= { prvtRsvpIfaceEntry 3 }
|
||
|
|
|
||
|
|
ifaceRsvpSlewDenom OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..214783647)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The denominator of the fraction, SlewMax, which is the
|
||
|
|
maximum allowable increase in the refresh interval, R, to
|
||
|
|
prevent state timeout while changing R. R is increased by
|
||
|
|
this fraction until it reaches the new desired value."
|
||
|
|
::= { prvtRsvpIfaceEntry 4 }
|
||
|
|
|
||
|
|
ifaceRsvpBlockadeMultiple OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..214783647)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The RSVP value, Kb, which is the number of refresh timeout
|
||
|
|
periods after which blockade state is deleted."
|
||
|
|
::= { prvtRsvpIfaceEntry 5 }
|
||
|
|
|
||
|
|
ifaceRsvpNotifyRRDecay OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..100)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The percentage increase in the rapid retransmission
|
||
|
|
interval for each consecutive unacknowledged RSVP Notify
|
||
|
|
message. A value of 0 indicates a constant retransmission
|
||
|
|
rate."
|
||
|
|
::= { prvtRsvpIfaceEntry 6}
|
||
|
|
|
||
|
|
ifaceRsvpNotifyRRInterval OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..214783647)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The interval in milliseconds before a Notify message is
|
||
|
|
first resent if no acknowledgement is received."
|
||
|
|
::= { prvtRsvpIfaceEntry 7 }
|
||
|
|
|
||
|
|
ifaceRsvpNotifyRRLimit OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..214783647)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The maximum number of times a Notify message is resent if
|
||
|
|
no acknowledgement is received."
|
||
|
|
::= { prvtRsvpIfaceEntry 8 }
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
ifaceRsvpHelloInterval OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The interval between sending consecutive Hello messages."
|
||
|
|
::= { prvtRsvpIfaceEntry 9 }
|
||
|
|
|
||
|
|
ifaceRsvpHelloDecay OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..100)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Percentage increase of hello interval after each Hello message
|
||
|
|
sent when the hello session with the neighbor has timed out."
|
||
|
|
::= { prvtRsvpIfaceEntry 10}
|
||
|
|
|
||
|
|
ifaceRsvpHelloTolerance OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The number of hello periods which may pass without receiving a successful
|
||
|
|
Hello message from a partner before the Hello session times out."
|
||
|
|
::= { prvtRsvpIfaceEntry 11 }
|
||
|
|
|
||
|
|
ifaceRsvpHelloPersist OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The number of hello periods which may pass after the Hello session times out before Hello messages cease."
|
||
|
|
::= { prvtRsvpIfaceEntry 12 }
|
||
|
|
|
||
|
|
ifaceRsvpHelloTTL OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..255)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The Time To Live that will be set in the IP header of all Hello packets sent to the neighbor associated with this interface."
|
||
|
|
::= { prvtRsvpIfaceEntry 13 }
|
||
|
|
|
||
|
|
prvtMplsRouteProtocolTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF PrvtMplsRouteProtocolEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This table contains for configuring the egress and ingress routes for LDP label
|
||
|
|
packets. It supports all CLI route types - bgp, isis, ospf, rip, static, kernel and
|
||
|
|
connected."
|
||
|
|
::= { prvtMPLSRouteObjs 1 }
|
||
|
|
|
||
|
|
prvtMplsRouteProtocolEntry OBJECT-TYPE
|
||
|
|
SYNTAX PrvtMplsRouteProtocolEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An entry in the table represents the configuration of a particular route type for ingress
|
||
|
|
or egress."
|
||
|
|
INDEX { prvtMplsRouteDirection, prvtMplsRouteType }
|
||
|
|
::= { prvtMplsRouteProtocolTable 1 }
|
||
|
|
|
||
|
|
PrvtMplsRouteProtocolEntry ::= SEQUENCE {
|
||
|
|
prvtMplsRouteDirection INTEGER,
|
||
|
|
prvtMplsRouteType INTEGER,
|
||
|
|
prvtMplsRouteRowStatus RowStatus
|
||
|
|
}
|
||
|
|
|
||
|
|
prvtMplsRouteDirection OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
ingress(1),
|
||
|
|
egress(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The direction of the route that will be used to receive or send LDP packets."
|
||
|
|
::= { prvtMplsRouteProtocolEntry 1 }
|
||
|
|
|
||
|
|
prvtMplsRouteType OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
bgp(1),
|
||
|
|
connected(2),
|
||
|
|
isis(3),
|
||
|
|
kernel(4),
|
||
|
|
ospf(5),
|
||
|
|
rip(6),
|
||
|
|
static(7)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The type of the route which will be used to send or receive LDP packets."
|
||
|
|
::= { prvtMplsRouteProtocolEntry 2}
|
||
|
|
|
||
|
|
prvtMplsRouteRowStatus OBJECT-TYPE
|
||
|
|
SYNTAX RowStatus
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object is used to create an entry in the table. Only createAndGo(4) should be
|
||
|
|
used."
|
||
|
|
::= { prvtMplsRouteProtocolEntry 3 }
|
||
|
|
|
||
|
|
prvtMplsRouteAddressTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF PrvtMplsRouteAddressEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This table contains for configuring the egress and ingress routes for LDP label
|
||
|
|
packets. It supports all CLI route types - bgp, isis, ospf, rip, static, kernel and
|
||
|
|
connected."
|
||
|
|
::= { prvtMPLSRouteObjs 2 }
|
||
|
|
|
||
|
|
prvtMplsRouteAddressEntry OBJECT-TYPE
|
||
|
|
SYNTAX PrvtMplsRouteAddressEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An entry in the table represents the configuration of a particular route type for ingress
|
||
|
|
or egress."
|
||
|
|
INDEX { prvtMplsAddressDirection, prvtMplsAddressIPAddr, prvtMplsAddressMask }
|
||
|
|
::= { prvtMplsRouteAddressTable 1 }
|
||
|
|
|
||
|
|
PrvtMplsRouteAddressEntry ::= SEQUENCE {
|
||
|
|
prvtMplsAddressDirection INTEGER,
|
||
|
|
prvtMplsAddressIPAddr InetAddress,
|
||
|
|
prvtMplsAddressMask Integer32,
|
||
|
|
prvtMplsAddressRowStatus RowStatus
|
||
|
|
}
|
||
|
|
|
||
|
|
prvtMplsAddressDirection OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
ingress(1),
|
||
|
|
egress(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The direction of the route that will be used to receive or send LDP packets."
|
||
|
|
::= { prvtMplsRouteAddressEntry 1 }
|
||
|
|
|
||
|
|
prvtMplsAddressIPAddr OBJECT-TYPE
|
||
|
|
SYNTAX InetAddress
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The IP address of the route that will be used to send or receive LDP packets."
|
||
|
|
::= { prvtMplsRouteAddressEntry 2}
|
||
|
|
|
||
|
|
prvtMplsAddressMask OBJECT-TYPE
|
||
|
|
SYNTAX Integer32(0..32)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The mask for the IP address of the route that will be used to send or receive LDP packets."
|
||
|
|
::= { prvtMplsRouteAddressEntry 3}
|
||
|
|
|
||
|
|
prvtMplsAddressRowStatus OBJECT-TYPE
|
||
|
|
SYNTAX RowStatus
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object is used to create an entry in the table. Only createAndGo(4) should be
|
||
|
|
used."
|
||
|
|
::= { prvtMplsRouteAddressEntry 4 }
|
||
|
|
|
||
|
|
END
|