mibs/MIBS/telco-systems/binos/PRVT-MST-MIB

-- *********************************************************************
-- *********************************************************************
-- ** Filename: PRVT-MST-MIB
-- ** Project: T - Ethernet and Fast Ethernet IP Switches.
-- ** Purpose: Private MIB
-- *********************************************************************
-- (c) Copyright, 2001, BATM Advanced Communications. All rights reserved.
-- WARNING:
--
-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
--
-- This file is the property of BATM Advanced Communications.
-- BATM Advanced Communications retains all title and
-- ownership in the Specification, including any revisions.

-- BATM Advanced Communications grants all interested parties a non-exclusive
-- license to use and distribute an unmodified copy of this
-- Specification in connection with management of BATM Advanced Communications
-- and Telco Systems<6D>products, and without fee, provided that the following
-- conditions are met:
-- 1. Redistributions of this specification must retain the above copyright
-- notice, this list of conditions and the following disclaimer.
-- 2. Redistributions in binary form must reproduce the above copyright
-- notice, this list of conditions and the following disclaimer in the
-- documentation and/or other materials provided with the distribution.
-- 3. The name of the BATM Advanced Communications MAY NOT be used to endorse
-- or promote products derived from this specification without specific prior written
-- permission.
--
-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
-- WARRANTY, THE SPECIFICATIONS CONTAINED IN THIS FILE ARE
-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
-- INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
-- TO USE, THE SPECIFICATION CONTAINED IN THIS FILE.
PRVT-MST-MIB DEFINITIONS ::= BEGIN

IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
Counter32,
Integer32,
NOTIFICATION-TYPE
FROM SNMPv2-SMI

MODULE-COMPLIANCE,
OBJECT-GROUP,
NOTIFICATION-GROUP
FROM SNMPv2-CONF

TruthValue,
TimeStamp,
DisplayString
FROM SNMPv2-TC

dot1dStpPortEntry,
Timeout,
BridgeId,
dot1dBasePort
FROM BRIDGE-MIB

switch
FROM PRVT-SWITCH-MIB;

prvtMSTMib MODULE-IDENTITY
LAST-UPDATED "200502160000Z"
ORGANIZATION "BATM Advanced Communication"
CONTACT-INFO
" BATM/Telco Systems Support team
Email:
For North America: techsupport@telco.com
For North Europe: support@batm.de, info@batm.de
For the rest of the world: techsupport@telco.com"
DESCRIPTION
"The MIB module for managing 802.1s
Multiple Spanning Tree Protocol (MSTP)."

-- revision history
REVISION "200502160000Z"
DESCRIPTION
"Fixed spelling errors and changed the contact info."

::= { switch 107 }

prvtMSTNotifications OBJECT IDENTIFIER ::= { prvtMSTMib 0 }
prvtMSTObjects OBJECT IDENTIFIER ::= { prvtMSTMib 1 }

mSTRegion OBJECT IDENTIFIER ::= { prvtMSTObjects 1 }
mSTBridgeParams OBJECT IDENTIFIER ::= { prvtMSTObjects 2 }
mSTTimers OBJECT IDENTIFIER ::= { prvtMSTObjects 3 }
mSTPort OBJECT IDENTIFIER ::= { prvtMSTObjects 4 }

--
-- Multiple Spanning Tree region objects
--
mSTRegionEditControl OBJECT IDENTIFIER ::= { mSTRegion 1 }
mSTRegionParameters OBJECT IDENTIFIER ::= { mSTRegion 2 }

mSTRegionEditBufferStatus OBJECT-TYPE
SYNTAX INTEGER {
released(1),
acquiredBySnmp(2),
acquiredByNonSnmp(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the current ownership status of the unique
Region Config Edit Buffer.

released -- the Edit Buffer can be acquired by any of
the SNMP management stations.

acquiredBySnmp -- the Edit Buffer is acquired by
any of the SNMP management stations.

acquiredByNonSnmp -- the Edit Buffer is acquired by the
non-SNMP users managing the device."
::= { mSTRegionEditControl 1 }

mSTRegionEditBufferOperation OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- read-only
acquire(2),
releaseWithForce(3),
commit(4),
rollBack(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the operation that is performed on the Region
Config Edit Buffer.

other -- none of the following operations.

acquire -- acquire the Edit Buffer. This operation can
only be performed when the mSTRegionEditBufferStatus
object has the value of
released(1). After the successful execution of
this action, the mSTRegionEditBufferStatus object
will be changed to acquiredBySnmp(2).

releaseWithForce -- release the Edit Buffer acquired by
non-SNMP users with force and discard the changes
in the Edit Buffer. This operation can only be
performed when the mSTRegionEditBufferStatus object
has the value of acquiredByNonSnmp(2).

commit -- commit the changes in the Edit Buffer
and release the Edit Buffer. The successful
execution of this action will make the changes
in the Edit Buffer effective on the device.
This operation can only be performed when the
mSTRegionEditBufferStatus object has the
value of acquiredBySnmp(3).

rollBack -- discard the changes in the Edit Buffer
and release the Edit Buffer. This operation can
only be performed when the mSTRegionEditBufferStatus
object has the value of acquiredBySnmp(3).

This object always returns other(1) when it is read."
::= { mSTRegionEditControl 2 }

mSTRegionName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational MST region name."
::= { mSTRegionParameters 1}

mSTRegionEditName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The MST region name in the Edit Buffer.

This object is only instantiated when the
mSTRegionEditBufferStatus object has the value of
acquiredBySnmp(2)."
::= { mSTRegionParameters 2 }

mSTRegionRevision OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational MST region version."
::= { mSTRegionParameters 3 }

mSTRegionEditRevision OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The MST region version in the Edit Buffer. This object is
only instantiated when the mSTRegionEditBufferStatus object
has the value of acquiredBySnmp(2)."
::= { mSTRegionParameters 4 }

mSTInstanceVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF MSTInstanceVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains MST instance information with
one entry for each MST instance numbered from 0
to mSTMaxInstanceNumber."
::= {mSTRegionParameters 5 }

mSTInstanceVlanEntry OBJECT-TYPE
SYNTAX MSTInstanceVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row containing the MST instance
information."
INDEX { mSTInstanceIndex }
::= { mSTInstanceVlanTable 1 }

MSTInstanceVlanEntry ::= SEQUENCE {
mSTInstanceIndex Integer32,
mSTInstanceVlansMapped OCTET STRING,
mSTInstanceVlansMapped2k OCTET STRING,
mSTInstanceVlansMapped3k OCTET STRING,
mSTInstanceVlansMapped4k OCTET STRING
}

mSTInstanceIndex OBJECT-TYPE
SYNTAX Integer32 (0..256)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"An integer that uniquely identifies an MST instance
from 0 to the object value of mSTMaxInstanceNumber."
::= {mSTInstanceVlanEntry 1 }

mSTInstanceVlansMapped OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN. The
first octet corresponds to VLANs with VlanIndex values
of 0 through 7; the second octet to VLANs 8 through
15; etc. The least significant bit of each octet
corresponds to the lowest value VlanIndex in that octet.

For each VLAN, if it is mapped to this MST instance,
then the bit corresponding to that VLAN is set to '1'."
::= {mSTInstanceVlanEntry 2 }

mSTInstanceVlansMapped2k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN for
VLANs with VlanIndex values of 1024 through 2047. The
first octet corresponds to VLANs with VlanIndex values
of 1024 through 1031; the second octet to VLANs 1032
through 1039; etc. The least significant bit of each
octet corresponds to the lowest value VlanIndex in that
octet.

For each VLAN, if it is mapped to this MST instance,
then the bit corresponding to that VLAN is set to '1'."
::= {mSTInstanceVlanEntry 3 }

mSTInstanceVlansMapped3k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN for
VLANs with VlanIndex values of 2048 through 3071. The
first octet corresponds to VLANs with VlanIndex values
of 2048 through 2055; the second octet to VLANs 2056
through 2063; etc. The least significant bit of each
octet corresponds to the lowest value VlanIndex in that
octet.

For each VLAN, if it is mapped to this MST instance,
then the bit corresponding to that VLAN is set to '1'."
::= {mSTInstanceVlanEntry 4 }

mSTInstanceVlansMapped4k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN for
VLANs with VlanIndex values of 3072 through 4095. The
first octet corresponds to VLANs with VlanIndex values
of 3072 through 3079; the second octet to VLANs 3080
through 3087; etc. The least significant bit of each
octet corresponds to the lowest value VlanIndex in that
octet.

For each VLAN, if it is mapped to this MST instance,
then the bit corresponding to that VLAN is set to '1'."
::= {mSTInstanceVlanEntry 5 }

mSTInstanceVlanEditTable OBJECT-TYPE
SYNTAX SEQUENCE OF MSTInstanceVlanEditEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains MST instance information in the
Edit Buffer with one entry for each MST
instance numbered from 0 to mSTMaxInstanceNumber.

This table is only instantiated when the
mSTRegionEditBufferStatus object has the value of
acquiredBySnmp(2)."
::= { mSTRegionParameters 6 }

mSTInstanceVlanEditEntry OBJECT-TYPE
SYNTAX MSTInstanceVlanEditEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row containing MST instance information
in the Edit Buffer."
INDEX { mSTInstanceIndex }
::= { mSTInstanceVlanEditTable 1 }

MSTInstanceVlanEditEntry ::= SEQUENCE {
mSTInstanceEditVlansMap OCTET STRING,
mSTInstanceEditVlansMap2k OCTET STRING,
mSTInstanceEditVlansMap3k OCTET STRING,
mSTInstanceEditVlansMap4k OCTET STRING
}

mSTInstanceEditVlansMap OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN. The
first octet corresponds to VLANs with VlanIndex values
of 0 through 7; the second octet to VLANs 8 through
15; etc. The least significant bit of each octet
corresponds to the lowest value VlanIndex in that octet.

For each VLAN, if it is mapped to this MST instance,
then the bit corresponding to that VLAN is set to
'1'. Each VLAN can only be mapped to one unique MST
instance in the range from 1 to mSTMaxInstanceNumber.
If the bit corresponding to a VLAN is changed from '1'
to '0', then that VLAN will be automatically mapped to
MST instance 0 by the device."
::= {mSTInstanceVlanEditEntry 1 }

mSTInstanceEditVlansMap2k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN for
VLANs with VlanIndex values of 1024 through 2047.
The first octet corresponds to VLANs with VlanIndex values
of 1024 through 1031; the second octet to VLANs 1032 through 1039; etc.
The least significant bit of each
octet corresponds to the lowest value VlanIndex in that
octet.

For each VLAN, if it is mapped to this MST instance,
then the bit corresponding to that VLAN is set to
'1'. Each VLAN can only be mapped to one unique MST
instance in the range from 1 to mSTMaxInstanceNumber.
If the bit corresponding to a VLAN is changed from '1'
to '0', then that VLAN will be automatically mapped to
MST instance 0 by the device."
::= {mSTInstanceVlanEditEntry 2 }

mSTInstanceEditVlansMap3k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN for
VLANs with VlanIndex values of 2048 through 3071. The
first octet corresponds to VLANs with VlanIndex values
of 2048 through 2055; the second octet to VLANs 2056
through 2063; etc. The least significant bit of each
octet corresponds to the lowest value VlanIndex in that
octet.

For each VLAN, if it is mapped to this MST instance,
then the bit corresponding to that VLAN is set to
'1'. Each VLAN can only be mapped to one unique MST
instance in the range from 1 to mSTMaxInstanceNumber.
If the bit corresponding to a VLAN is changed from '1'
to '0', then that VLAN will be automatically mapped to
MST instance 0 by the device."
::= {mSTInstanceVlanEditEntry 3 }

mSTInstanceEditVlansMap4k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN for
VLANs with VlanIndex values of 3072 through 4095. The
first octet corresponds to VLANs with VlanIndex values
of 3072 through 3079; the second octet to VLANs 3080
through 3087; etc. The least significant bit of each
octet corresponds to the lowest value VlanIndex in that
octet.

For each VLAN, if it is mapped to this MST instance,
then the bit corresponding to that VLAN is set to
'1'. Each VLAN can only be mapped to one unique MST
instance in the range from 1 to mSTMaxInstanceNumber.
If the bit corresponding to a VLAN is changed from '1'
to '0', then that VLAN will be automatically mapped to
MST instance 0 by the device."
::= {mSTInstanceVlanEditEntry 4 }

--
-- Multiple Spanning Tree bridge parametrs
--
mSTMaxHopCount OBJECT-TYPE
SYNTAX Integer32 (1..40)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum number of hops for the MST region."
::= { mSTBridgeParams 1 }

mSTMaxInstanceNumber OBJECT-TYPE
SYNTAX Integer32 (1..256)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum MST (Multiple Spanning Tree) instance IDs
that are supported by the device for the MST Protocol."
::= { mSTBridgeParams 2 }

mSTInstanceTable OBJECT-TYPE
SYNTAX SEQUENCE OF MSTInstanceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains MST instance information with
one entry for each MST instance numbered from 0
to mSTMaxInstanceNumber."
::= {mSTBridgeParams 3 }

mSTInstanceEntry OBJECT-TYPE
SYNTAX MSTInstanceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row containing the MST instance
information."
INDEX { mSTInstanceIndex }
::= { mSTInstanceTable 1 }

MSTInstanceEntry ::= SEQUENCE {
mSTInstanceDesignatedRoot BridgeId,
mSTInstanceRootCost Integer32,
mSTInstanceRootPort Integer32,
mSTInstanceDesignatedBridge BridgeId,
mSTInstanceRootPriority Integer32,
mSTInstanceRemainingHopCount Integer32,
mSTInstancePriority Integer32
}

mSTInstanceDesignatedRoot OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unique MST Bridge Identifier of the Bridge
recorded as the Root in the Configuration BPDUs
transmitted by the Designated Bridge for the
segment to which the port is attached."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.5.4"
::= { mSTInstanceEntry 1 }

mSTInstanceRootCost OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The path cost of the root Port of this MST. This value is
compared to the Root Path Cost field in received
bridge PDUs."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.5.5"
::= { mSTInstanceEntry 2 }

mSTInstanceRootPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The root port of this MST."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.5.6"
::= { mSTInstanceEntry 3 }


mSTInstanceDesignatedBridge OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unique MST Designated Bridge Identifier. "

REFERENCE
"IEEE 802.1D-1990: Section 4.5.5.4"
::= { mSTInstanceEntry 4}

mSTInstanceRootPriority OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MST root priority."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.5.5"
::= { mSTInstanceEntry 5 }

mSTInstanceRemainingHopCount OBJECT-TYPE
SYNTAX Integer32 (0..40)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The remaining hop count for this MST instance."

::= {mSTInstanceEntry 6 }

mSTInstancePriority OBJECT-TYPE
SYNTAX Integer32 (0..61440)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"MSTI priority, in steps of 4096."
DEFVAL { 32768 }
::= {mSTInstanceEntry 7 }

--
-- Multiple Spanning Tree timers
--
mSTMigrationTimer OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"MST (Multiple Spanning Tree) migration timer .
Determines timeout migration in seconds"
::= { mSTTimers 1}


mSTTxHoldCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"MST (Multiple Spanning Tree) Tx Hold Counter"
::= { mSTTimers 2}


mSTMaxAge OBJECT-TYPE
SYNTAX Timeout (600..4000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum age of Multiple Spanning Tree Protocol
information learned from the network on any port
before it is discarded, in units of hundredths of
a second. This is the actual value that this
bridge is currently using."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.3.4"
::= { mSTTimers 3 }

mSTHelloTime OBJECT-TYPE
SYNTAX Timeout (100..1000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time between the transmissions of
Configuration bridge PDUs by this node on any port
when the port is the root of the spanning tree or trying
to become so, in units of hundredths of a second.
This is the actual value that this bridge is
currently using."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.3.5"
::= { mSTTimers 4 }

mSTForwardDelay OBJECT-TYPE
SYNTAX Timeout (400..3000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This time value, measured in units of hundredths
of a second, controls how fast a port changes its
spanning state when moving toward the Forwarding
state. The value determines how long the port
stays in each of the Listening and Learning
states, which precede the Forwarding state. This
value is also used, when a topology change has
been detected and is underway, to age all dynamic
entries in the Forwarding Database. Note that
this value is the one that this bridge is
currently using, in contrast to
mSTBridgeForwardDelay which is the value that
this bridge and all others would start using
if/when this bridge were to become the root."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.3.6"
::= { mSTTimers 5 }


mSTBridgeMaxAge OBJECT-TYPE
SYNTAX Timeout (600..4000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value that all bridges use for MaxAge when
this bridge is acting as the root. Note that
802.1D-1990 specifies that the range for this
parameter is related to the value of
mSTBridgeHelloTime. The granularity of this
timer is specified by 802.1D-1990 to be 1 second.
An agent may return a badValue error if a set operation is
attempted with a value that is not a whole number
of seconds."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.3.8"
::= { mSTTimers 6 }

mSTBridgeHelloTime OBJECT-TYPE
SYNTAX Timeout (100..1000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value that all bridges use for HelloTime when
this bridge is acting as the root. The
granularity of this timer is specified by 802.1D-
1990 to be 1 second. An agent may return a badValue error if a set operation is
attempted with a value that is not a whole number
of seconds."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.3.9"
::= { mSTTimers 7 }

mSTBridgeForwardDelay OBJECT-TYPE
SYNTAX Timeout (400..3000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value that all bridges use for ForwardDelay
when this bridge is acting as the root. Note that
802.1D-1990 specifies that the range for this
parameter is related to the value of
mSTBridgeMaxAge. The granularity of this
timer is specified by 802.1D-1990 to be 1 second.
An agent may return a badValue error if a set operation is
attempted with a value that is not a whole number
of seconds."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.3.10"
::= { mSTTimers 8 }


--
-- Multiple Spanning Tree bridge ports
--
mSTPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF MSTPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing port information for the MST
Protocol on all the bridge ports existing on the
system."
::= { mSTPort 1 }

mSTPortEntry OBJECT-TYPE
SYNTAX MSTPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry with port information for the MST Protocol
on a bridge port."
INDEX { dot1dBasePort }
::= { mSTPortTable 1 }

MSTPortEntry ::= SEQUENCE {
mSTPortAdminLinkType INTEGER,
mSTPortOperLinkType INTEGER,
mSTPortProtocolMigration TruthValue,
mSTPortStatus BITS,
mSTPortAdminEdgePort TruthValue,
mSTPortOperEdgePort TruthValue,
mSTPortEnable INTEGER

}

mSTPortAdminLinkType OBJECT-TYPE
SYNTAX INTEGER {
pointToPoint(1),
shared(2),
auto(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the administrative link type configuration of
a bridge port for the MST protocol.

pointToPoint -- the port is administratively configured to
be connected to a point-to-point link.

shared -- the port is administratively configured to be
connected to a shared medium.

auto -- the administrative configuration of the port's
link type depends on the duplex mode of the port's link.
If the port's link is full-duplex, the administrative
link type configuration on this port will be taken
as pointTopoint(1). If the port link is half-duplex,
the administrative link type configuration on this
port will be taken as shared(2).

This configuration of this object only takes effect when the
stpxSpanningTreeType is mst(4)."
::= { mSTPortEntry 1 }

mSTPortOperLinkType OBJECT-TYPE
SYNTAX INTEGER {
pointToPoint(1),
shared(2),
other(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the operational link type of a bridge port
for the MST protocol.

pointToPoint -- the port is operationally connected to
a point-to-point link.

shared -- the port is operationally connected to
a shared medium.

other -- none of the above.

This object is only instantiated when the value of the
stpxSpanningTreeType object is mst(4)."
::= { mSTPortEntry 2 }

mSTPortProtocolMigration OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The protocol migration control on this port. When the
value of thw stpxSpanningTreeType object is mst(4), setting
true(1) to this object forces the device to try using
version 2 BPDUs on this port. When the value of
the stpxSpanningTreeType object is not mst(4), setting true(1) to
this object has no effect. Setting false(2) to this object
has no effect. This object always returns false(2) when read."
REFERENCE
"IEEE 802.1w clause 14.8.2.4, 17.26."
::= { mSTPortEntry 3 }

mSTPortStatus OBJECT-TYPE
SYNTAX BITS {
edge(0),
boundary(1),
pvst(2),
stp(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the operational status of the port for the
MST protocol.

edge -- this port is an edge port for the MST region.

boundary -- this port is a boundary port for the
MST region.

pvst -- this port is connected to a PVST/PVST+ bridge.

stp -- this port is connected to a Single Spanning
Tree bridge.

This object is only instantiated when the object value
of stpxSpanningTreeType is mst(4)."
::= { mSTPortEntry 4 }

mSTPortAdminEdgePort OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative value of the Edge Port parameter. A
value of true(1) indicates that this port should be
assumed as an edge-port and a value of FALSE(2) indicates
that this port should be assumed as a non-edge-port."
REFERENCE
"IEEE 802.1t clause 14.8.2, 18.3.3"
::= { mSTPortEntry 5 }

mSTPortOperEdgePort OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational value of the Edge Port parameter. The
object is initialized to the value of
dot1dStpPortAdminEdgePort and is set false(2) on reception of
a BPDU."
REFERENCE
"IEEE 802.1t clause 14.8.2, 18.3.4"
::= { mSTPortEntry 6 }

mSTPortEnable OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The enabled/disabled status of the port."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.5.2"
::= { mSTPortEntry 7 }

mSTPortPerMstTable OBJECT-TYPE
SYNTAX SEQUENCE OF MSTPortPerMstEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing a list of the bridge ports for a
particular MST instance. This table holds the
settings."
::= { mSTPort 2 }

mSTPortPerMstEntry OBJECT-TYPE
SYNTAX MSTPortPerMstEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing the port information for the MST
protocol on a port for a particular MST instance."
INDEX { mSTInstanceIndex,
dot1dBasePort }
::= { mSTPortPerMstTable 1 }

MSTPortPerMstEntry ::= SEQUENCE {
mSTPortPerMstRoleValue INTEGER,
mSTPortPerMstPriority INTEGER,
mSTPortPerMstState INTEGER,
mSTPortPerMstPathCost INTEGER,
mSTPortPerMstDesignatedCost Integer32,
mSTPortPerMstDesignatedBridge BridgeId,
mSTPortPerMstDesignatedPort OCTET STRING

}

mSTPortPerMstRoleValue OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
root(2),
designated(3),
alternate(4),
backUp(5),
boundary(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the port role on a particular MST instance
for the MST protocol.

disabled -- this port has no role on this MST instance.

root -- this port has the role of root port on this MST
instance.

designated -- this port has the role of designated
port on this MST instance.

alternate -- this port has the role of alternate port
on this MST instance.

backUp -- this port has the role of backup port on this
MST instance.

boundary -- this port has the role of boundary port on
this MST instance."
::= { mSTPortPerMstEntry 1 }

mSTPortPerMstPriority OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the priority field which is
contained in the first (in network byte order)
octet of the (2 octet long) Port ID. The other
octet of the Port ID is given by the value of
mSTPort."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.5.1"
::= { mSTPortPerMstEntry 2 }

mSTPortPerMstState OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
blocking(2),
listening(3),
learning(4),
forwarding(5),
broken(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port's current state as defined by
application of the Spanning Tree Protocol. This
state controls what action a port takes on
reception of a frame. If the bridge has detected
a port that is malfunctioning it will place that
port into the broken(6) state. For ports that
are disabled (see mSTPortEnable), this object
will have a value of disabled(1)."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.5.2"
::= { mSTPortPerMstEntry 3 }


mSTPortPerMstPathCost OBJECT-TYPE
SYNTAX INTEGER (1..200000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The contribution of this port to the path cost of
paths toward the spanning tree root that include
this port. 802.1D-1990 recommends that the
default value of this parameter be in inverse
proportion to the speed of the attached LAN."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.5.3"
::= { mSTPortPerMstEntry 4 }

mSTPortPerMstDesignatedCost OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
REFERENCE
""
::= { mSTPortPerMstEntry 5 }

mSTPortPerMstDesignatedBridge OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
REFERENCE
""
::= { mSTPortPerMstEntry 6 }

mSTPortPerMstDesignatedPort OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (2))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Port Identifier of the port on the MST Instance Designated Bridge for this port's segment."
::= { mSTPortPerMstEntry 7 }

mstpNewRoot NOTIFICATION-TYPE
OBJECTS { mSTInstanceIndex }
STATUS current
DESCRIPTION
"This notification is the MSTP equivalent of the standard STP newRoot notification."
::= {prvtMSTNotifications 1}

mstpTopologyChange NOTIFICATION-TYPE
OBJECTS { mSTInstanceIndex }
STATUS current
DESCRIPTION
"This notification is the MSTP equivalent of the standard STP topologyChange notification."
::= {prvtMSTNotifications 2}


END