mibs/MIBS/telco-systems/binos/PRVT-OSPF-EXTENSION-MIB

-- *********************************************************************
-- *********************************************************************
-- ** Filename: PRVT-OSPF-EXTENSION-MIB
-- *********************************************************************
-- *********************************************************************
-- ** Filename: PRVT-CONFIGCHANGE-MIB
-- ** Project: T - Ethernet and Fast Ethernet IP Switches.
-- ** Purpose: Private MIB
-- *********************************************************************
-- (c) Copyright, 2001, BATM Advanced Communications. All rights reserved.
-- WARNING:
--
-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
--
-- This file is the property of BATM Advanced Communications.
-- BATM Advanced Communications retains all title and
-- ownership in the Specification, including any revisions.

-- BATM Advanced Communications grants all interested parties a non-exclusive
-- license to use and distribute an unmodified copy of this
-- Specification in connection with management of BATM Advanced Communications 
-- and Telco Systems<6D>products, and without fee, provided that the following
-- conditions are met:
-- 1. Redistributions of this specification must retain the above copyright
-- notice, this list of conditions and the following disclaimer.
-- 2. Redistributions in binary form must reproduce the above copyright
-- notice, this list of conditions and the following disclaimer in the
-- documentation and/or other materials provided with the distribution.
-- 3. The name of the BATM Advanced Communications MAY NOT be used to endorse
-- or promote products derived from this specification without specific prior written
-- permission.
--
-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
-- WARRANTY, THE SPECIFICATIONS CONTAINED IN THIS FILE ARE
-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
-- INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
-- TO USE, THE SPECIFICATION CONTAINED IN THIS FILE.
-- *********************************************************************
-- (c) Copyright, 2001, BATM Advanced Communications. All rights reserved.
-- WARNING:
--
-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
--
-- This file is the property of BATM Advanced Communications.
-- BATM Advanced Communications retains all title and
-- ownership in the Specification, including any revisions.

-- BATM Advanced Communications grants all interested parties a non-exclusive
-- license to use and distribute an unmodified copy of this
-- Specification in connection with management of BATM Advanced Communications 
-- and Telco Systems<6D>products, and without fee, provided that the following
-- conditions are met:
-- 1. Redistributions of this specification must retain the above copyright
-- notice, this list of conditions and the following disclaimer.
-- 2. Redistributions in binary form must reproduce the above copyright
-- notice, this list of conditions and the following disclaimer in the
-- documentation and/or other materials provided with the distribution.
-- 3. The name of the BATM Advanced Communications MAY NOT be used to endorse
-- or promote products derived from this specification without specific prior written
-- permission.
--
-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
-- WARRANTY, THE SPECIFICATIONS CONTAINED IN THIS FILE ARE
-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
-- INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
-- TO USE, THE SPECIFICATION CONTAINED IN THIS FILE.
PRVT-OSPF-EXTENSION-MIB DEFINITIONS ::= BEGIN
IMPORTS
    MODULE-IDENTITY, OBJECT-TYPE
        FROM SNMPv2-SMI
             TruthValue, RowStatus
        FROM SNMPv2-TC
ipSwitch   
	                                     FROM PRVT-SWITCH-MIB;  


    prvtOSPFExtensionMib MODULE-IDENTITY
    LAST-UPDATED "200801010000Z"
    ORGANIZATION "BATM Advanced Communication"
    CONTACT-INFO
        "BATM/Telco Systems Support team
				Email: 
				For North America: techsupport@telco.com
				For North Europe: support@batm.de, info@batm.de
				For the rest of the world: techsupport@telco.com"

    DESCRIPTION
        "The OSPF extension MIB module contains additional information, needed to
         control the OSPF protocol, that is not found in the standard RFC"

    -- revision history    
         REVISION     "200801010000Z"
     	 DESCRIPTION
		"Removed redefined OIDs in private vendor extension definitions." 
     REVISION     "200502160000Z"
     	 DESCRIPTION
		"Fixed spelling errors and changed the contact info." 

    REVISION     "200211110000Z"
    DESCRIPTION
        "Initial version."


    ::= { routingProtocols 2 }

    -------------------------------------------------------------------------------
    --     PRIVATE BRANCH  PRODUCTS
    -------------------------------------------------------------------------------
    routingProtocols   OBJECT IDENTIFIER ::= { ipSwitch 4 }


    ospfExtension OBJECT IDENTIFIER ::= { prvtOSPFExtensionMib 1 }

    ospfEnable OBJECT-TYPE
    SYNTAX TruthValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "This object enables/disables the OSPF process in the switch"
    ::= { ospfExtension 1 }

    ospfRedistributeTable OBJECT-TYPE
    SYNTAX SEQUENCE OF OspfRedistributeEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
              "The table represents the routing protocols, redistributed into the OSPF 
              routing domain.
               
              Creation of conceptual row in the table starts the redistribution of the 
              specified protocol, which would lead to the injection of routing information 
              from that protocol into the OSPF.
              
              Deletion of conceptual row would stop the redistribution of that protocol 
              into the OSPF.
              
              OSPF router, which redistributes routing information from other 
              protocols, is an ASBR router"
    ::= { ospfExtension 2 }

    ospfRedistributeEntry OBJECT-TYPE
    SYNTAX OspfRedistributeEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
               "The conceptual row represents a routing protocol, redistributed into OSPF"
    INDEX {ospfRedistributeProtocol}
    ::= {ospfRedistributeTable 1}

    OspfRedistributeEntry ::= SEQUENCE {
        ospfRedistributeProtocol       INTEGER,
        ospfRedistributeMetric         INTEGER,
        ospfRedistributeMetricType     INTEGER,
        ospfRedistributeRouteMap       OCTET STRING,
        ospfRedistributeRowStatus      RowStatus
    }


    ospfRedistributeProtocol OBJECT-TYPE
    SYNTAX INTEGER {
           kernel (1),
           connected(2),
           static (3),
           rip (4),
           bgp (5)
           }
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
               "The specific routes redistributed into OSPF. For T4R model the valid values 
               are connected, rip and static.
               For all the other models all of the above routes can be redistributed "
        ::= { ospfRedistributeEntry 1}

    ospfRedistributeMetric OBJECT-TYPE
    SYNTAX INTEGER (0..16777214)
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
               "The metric, with which the external routes will be redistributed in the OSPF"
        ::= {ospfRedistributeEntry 2}

    ospfRedistributeMetricType OBJECT-TYPE
    SYNTAX INTEGER {
           e1(1),
           e2(2)
           }
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "The type of metric, with which the external routes are advertised into the OSPF 
        routing domain. OSPF supports two types of external metrics.  Type 1 external 
        metrics are expressed in the same units as the OSPF interface cost (i.e., in terms 
        of the link state metric).  Type 2 external metrics are an order of magnitude larger; 
        any Type 2 metric is considered greater than the cost of any path internal to the AS.  
        Use of Type 2 external metrics assumes that routing between AS'es is the major 
        cost of routing a packet, and eliminates the need for conversion of external costs 
        to internal link state metrics."
    ::= {ospfRedistributeEntry 3}

    ospfRedistributeRouteMap OBJECT-TYPE
    SYNTAX OCTET STRING
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
               "The route map that would filter the redistributed routing information"
    ::= {ospfRedistributeEntry 4}

    ospfRedistributeRowStatus OBJECT-TYPE
    SYNTAX RowStatus
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "Indicates the status of the row. Setting of this field to active enables the 
        redistribution of the protocol.
        
        Setting this field to destroy disables the redistribution of the protocol."
    ::= {ospfRedistributeEntry 5}


END