mibs/MIBS/telco-systems/binos/PRVT-SAA-MIB

-- *********************************************************************
-- *********************************************************************
-- ** Filename: PRVT-SWITCH-SAA-MIB
-- ** Project: T - Ethernet and Fast Ethernet IP Switches.
-- ** Purpose: Private MIB
-- *********************************************************************
-- (c) Copyright, 2001, BATM Advanced Communications. All rights reserved.
-- WARNING:
--
-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
--
-- This file is the property of BATM Advanced Communications.
-- BATM Advanced Communications retains all title and
-- ownership in the Specification, including any revisions.

-- BATM Advanced Communications grants all interested parties a non-exclusive
-- license to use and distribute an unmodified copy of this
-- Specification in connection with management of BATM Advanced Communications 
-- and Telco Systems<6D>products, and without fee, provided that the following
-- conditions are met:
-- 1. Redistributions of this specification must retain the above copyright
-- notice, this list of conditions and the following disclaimer.
-- 2. Redistributions in binary form must reproduce the above copyright
-- notice, this list of conditions and the following disclaimer in the
-- documentation and/or other materials provided with the distribution.
-- 3. The name of the BATM Advanced Communications MAY NOT be used to endorse
-- or promote products derived from this specification without specific prior written
-- permission.
--
-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
-- WARRANTY, THE SPECIFICATIONS CONTAINED IN THIS FILE ARE
-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
-- INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
-- TO USE, THE SPECIFICATION CONTAINED IN THIS FILE.
PRVT-SAA-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, Counter32, NOTIFICATION-TYPE,
    IpAddress, Integer32, Counter64
        FROM SNMPv2-SMI                  -- [RFC2578]
    MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP       
        FROM SNMPv2-CONF                 -- [RFC2580]
    RowStatus, TruthValue, DisplayString, TEXTUAL-CONVENTION
        FROM SNMPv2-TC                   -- [RFC2579]
    SnmpAdminString
        FROM SNMP-FRAMEWORK-MIB          -- [RFC2571]
    switch
 	FROM PRVT-SWITCH-MIB;

prvtSaaMib MODULE-IDENTITY
LAST-UPDATED "201503250000Z"
ORGANIZATION "BATM Advanced Communication"       
CONTACT-INFO
"BATM/Telco Systems Support team
Email: 
For North America: techsupport@telco.com
For North Europe: support@batm.de, info@batm.de
For the rest of the world: techsupport@telco.com"

DESCRIPTION
"This MIB provides the extended capability of controlling and 
provisioning various OAM tests and SAA monitoring.
It adds extra functionality for DISMAN-PING-MIB"
-- revision history
        REVISION       "201503250000Z"
        DESCRIPTION
        "Add CountAllPriorities leaf to SAA Throughput tests."
-- revision history
        REVISION       "201405160000Z"
        DESCRIPTION
        "Add twamp tests."     
-- revision history
        REVISION       "201110200000Z"
        DESCRIPTION
        "Add ethertype leaf to SAA Throughput tests."
-- revision history
        REVISION       "201102070000Z"
        DESCRIPTION
        "Add delays to SAA Throughput tests."
-- revision history
        REVISION       "201009290000Z"
        DESCRIPTION
        "Add name leaf to profile table."
-- revision history
        REVISION       "201009270000Z"
        DESCRIPTION
        "Add measurement units for prvtSaaY1731TestResultCompletionTime, fix range for prvtSaaY1731PmTestEncapValue."
-- revision history
        REVISION       "201009130000Z"
        DESCRIPTION
        "Add decription for percentile values for jitter and delay in case of outside 1-100 range."
-- revision history
        REVISION       "201008240000Z"
        DESCRIPTION
        "Fix prvtSaaY1731PmTestMonitorInterval range and default value."
-- revision history
	REVISION       "201005050000Z"
	DESCRIPTION
	"Add prvtSaaY1731LoopbackTestTable."
-- revision history
	REVISION       "201003260000Z"
	DESCRIPTION
	"Add prvtSaaY1731PmTestProfile description if retued value is 0."
-- revision history
	REVISION       "201003180000Z"
	DESCRIPTION
	"Add detailed description and measurement units on some test result leafs."
-- revision history
	REVISION       "201003120000Z"
	DESCRIPTION
	"Clarify description on several leafs."
-- revision history
	REVISION       "201001110000Z"
	DESCRIPTION
	"Initial version."

::= { switch 130 }

-- ***********************************************
-- ************ Top level structure of the MIB****
-- ***********************************************
 prvtSaaNotifications              OBJECT IDENTIFIER ::= { prvtSaaMib 0 }
 prvtSaaObjects                    OBJECT IDENTIFIER ::= { prvtSaaMib 1 }
 prvtSaaConformance                OBJECT IDENTIFIER ::= { prvtSaaMib 2 }

prvtSaaTest OBJECT IDENTIFIER ::= { prvtSaaObjects 1 }
prvtSaaTestResult OBJECT IDENTIFIER ::= { prvtSaaObjects 2 }
prvtSaaProfiles OBJECT IDENTIFIER ::= { prvtSaaObjects 3 }

-- ***********************************************
-- ************* global scalar objects ***********
-- ***********************************************

-- ***********************************************
-- *************** Y1731 PM TEST *****************
-- ***********************************************

prvtSaaY1731PmTestTable OBJECT-TYPE
    SYNTAX SEQUENCE OF PrvtSaaY1731PmTestEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table holds the configuration for a SAA Y1731 test"
    ::= { prvtSaaTest 1 }

prvtSaaY1731PmTestEntry OBJECT-TYPE
	SYNTAX PrvtSaaY1731PmTestEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
	"NONE"
	INDEX {
		prvtSaaY1731PmTestOwner,
		prvtSaaY1731PmTestName
              }
	::= { prvtSaaY1731PmTestTable 1 }

PrvtSaaY1731PmTestEntry ::= SEQUENCE {
	prvtSaaY1731PmTestOwner				SnmpAdminString,
	prvtSaaY1731PmTestName				SnmpAdminString,
	prvtSaaY1731PmTestType 				INTEGER,
	prvtSaaY1731PmTestExecStatus			INTEGER,
	prvtSaaY1731PmTestEncapType			INTEGER,
	prvtSaaY1731PmTestEncapValue			Unsigned32,
	prvtSaaY1731PmTestUserPort			Unsigned32,
	prvtSaaY1731PmTestUplinkPort			Unsigned32,
	prvtSaaY1731PmTestTargetMac			DisplayString,
	prvtSaaY1731PmTestCfmDomainLevel		Unsigned32,
	prvtSaaY1731PmTestRemoteCfmMep			Unsigned32,
	prvtSaaY1731PmTestProfile			Unsigned32,
	prvtSaaY1731PmTestHistoryDepth			Unsigned32,
	prvtSaaY1731PmTestPeriod			Unsigned32,
	prvtSaaY1731PmTestTimeout			Unsigned32,
	prvtSaaY1731PmTestMonitorInterval		Unsigned32,
	prvtSaaY1731PmTestFrequency			Unsigned32,
	prvtSaaY1731PmTestClocksInSync			TruthValue,
	prvtSaaY1731PmTestDelayMethod			INTEGER,
	prvtSaaY1731PmTestDelayPvalue			Unsigned32,
	prvtSaaY1731PmTestJitterMethod			INTEGER,
	prvtSaaY1731PmTestJitterPvalue			Unsigned32,
	prvtSaaY1731PmTestPriority			Unsigned32,
	prvtSaaY1731PmTestRowStatus			RowStatus,
	prvtSaaY1731PmTestCCMAPSCount          TruthValue,
	prvtSaaY1731PmTestLossMeasurementType INTEGER,
	prvtSaaY1731PmTestSLMTransmit 		TruthValue,
	prvtSaaY1731PmTestTestId             Unsigned32,
	prvtSaaY1731PmTestDropEligible      TruthValue,
	prvtSaaY1731PmTestDataSize            Unsigned32,
	prvtSaaY1731PmTestCountAllPriorities         TruthValue


}

prvtSaaY1731PmTestOwner OBJECT-TYPE
    SYNTAX      SnmpAdminString (SIZE(0..32))
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       "This string is used to describe the owner of the
       Y1731 Pm SAA test."
    ::= { prvtSaaY1731PmTestEntry 1 }

prvtSaaY1731PmTestName OBJECT-TYPE
    SYNTAX      SnmpAdminString (SIZE(0..32))
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       "This string is used to describe the test name for the
       Y1731 Pm SAA test. It is also used as a test identifier."
    ::= { prvtSaaY1731PmTestEntry 2 }

prvtSaaY1731PmTestType OBJECT-TYPE
	SYNTAX INTEGER
        {
		frameloss ( 1 ),
		framedelayAndDelayvariation ( 2 ),
                framelossAndFramedelayAndDelayvariation ( 3 )
	}
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
	"SAA Y1731 Pm test type."
	::= { prvtSaaY1731PmTestEntry 3 }

prvtSaaY1731PmTestExecStatus OBJECT-TYPE
	SYNTAX INTEGER
	{
		notRunning ( 1 ),
		running ( 2 )
	}
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"SAA Y1731 Pm test execution status."
	DEFVAL { notRunning }
	::= { prvtSaaY1731PmTestEntry 4 }

prvtSaaY1731PmTestEncapType OBJECT-TYPE
	SYNTAX INTEGER
	{
		none	( 1 ),
		service ( 2 ),
		vlan	( 3 )
	}
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
	"SAA Y1731 Pm test encapsulation type.
	It can be either test over VLAN or test over Service.
	The value 1 is the default value representing that neither
	type is set."
	DEFVAL { none }
	::= { prvtSaaY1731PmTestEntry 5 }

prvtSaaY1731PmTestEncapValue OBJECT-TYPE
        SYNTAX Unsigned32 (1..4294967295)
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
	"The value of the defined SAA Y1731 Pm test encapsulation.
	It should be either the Vlan ID or the Service ID, depending 
	on the type set in prvtSaaY1731PmTestEncapType."
	::= { prvtSaaY1731PmTestEntry 6 }

prvtSaaY1731PmTestUserPort OBJECT-TYPE
	SYNTAX Unsigned32
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
	"For SAA Y1731 Pm test, this leaf is used only in case the encapsulation 
	is VLAN type and it determines the port on which the user is connected."
	::= { prvtSaaY1731PmTestEntry 7 }

prvtSaaY1731PmTestUplinkPort OBJECT-TYPE
	SYNTAX Unsigned32
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
	"For SAA Y1731 Pm test, this leaf is used only in case the encapsulation 
	is VLAN type and it determines the port that the SAA test devices are 
	connected through."
	::= { prvtSaaY1731PmTestEntry 8 }

prvtSaaY1731PmTestTargetMac OBJECT-TYPE
	SYNTAX DisplayString (SIZE(17))
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
	"The target MAC address for the SAA Y1731 test."
	::= { prvtSaaY1731PmTestEntry 9 }

prvtSaaY1731PmTestCfmDomainLevel OBJECT-TYPE
	SYNTAX Unsigned32 (0..7)
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
	"CFM Domain level on which the test will be run."
	::= { prvtSaaY1731PmTestEntry 10 }

prvtSaaY1731PmTestRemoteCfmMep OBJECT-TYPE
	SYNTAX Unsigned32 (0..8191)
        MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
	"The remote MEP associated with target MAC."
	::= { prvtSaaY1731PmTestEntry 11 }

prvtSaaY1731PmTestProfile OBJECT-TYPE
	SYNTAX Unsigned32 (0|1..2147483647)
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
	"The profile ID associated to the SAA Y1731 Pm test.
	 A value of 0 depicts no set profile."
	::= { prvtSaaY1731PmTestEntry 12 }

prvtSaaY1731PmTestHistoryDepth OBJECT-TYPE
	SYNTAX Unsigned32 (1..120)
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
	"Probe history count."
	DEFVAL { 96 }
	::= { prvtSaaY1731PmTestEntry 13 }

prvtSaaY1731PmTestPeriod OBJECT-TYPE
	SYNTAX Unsigned32 (100..10000)
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
	"The period the SAA Y1731 Pm test will run, in milliseconds."
	DEFVAL { 1000 }
	::= { prvtSaaY1731PmTestEntry 14 }

prvtSaaY1731PmTestTimeout OBJECT-TYPE
	SYNTAX Unsigned32 (1..60)
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
	"The timeout period for a test packet."
	DEFVAL { 3 }
	::= { prvtSaaY1731PmTestEntry 15 }

prvtSaaY1731PmTestMonitorInterval OBJECT-TYPE
        SYNTAX Unsigned32 (1..60)
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
	"Monitoring interval is relevant only for continous Y1731 test.
        It is measured in minutes."
        DEFVAL { 15 }
	::= { prvtSaaY1731PmTestEntry 16 }

prvtSaaY1731PmTestFrequency OBJECT-TYPE
	SYNTAX Unsigned32 (0..65535)
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
	"The time between two consecutive intervals.
	A value of 1 defines a delay of a second between the end of the first 
	and the begining of the next interval."
	DEFVAL { 0 }
	::= { prvtSaaY1731PmTestEntry 17 }

prvtSaaY1731PmTestClocksInSync OBJECT-TYPE
	SYNTAX TruthValue
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
	"This variable tells if the clocks of the test are syncronized."
	DEFVAL { false }
	::= { prvtSaaY1731PmTestEntry 18 }

prvtSaaY1731PmTestDelayMethod OBJECT-TYPE
	SYNTAX INTEGER
        {
		average ( 1 ),
		percentile ( 2 )
	}
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
	"Defines the method of calculating delay on a Y1731 test."
	::= { prvtSaaY1731PmTestEntry 19 }

prvtSaaY1731PmTestDelayPvalue OBJECT-TYPE
	SYNTAX Unsigned32 (1..100)
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
	"Percent used to calculate delay in p-percentile method. 
	 Reported delay is the percent-th member in the array with sorted delays. 
         Relevant only for p-percentile method.
         Value in range of 1-100 is for percentile delay method of calculation.
         Value 101 describes that average delay method of calculation is used.
         Only values inside the 1..100 range can be set to this parameter."
	::= { prvtSaaY1731PmTestEntry 20 }

prvtSaaY1731PmTestJitterMethod OBJECT-TYPE
	SYNTAX INTEGER
        {
		peakToPeak ( 1 ),
                variance ( 2 ),
		percentile ( 3 )
	}
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
	"Defines the method of calculating jitter on a Y1731 test."
	::= { prvtSaaY1731PmTestEntry 21 }

prvtSaaY1731PmTestJitterPvalue OBJECT-TYPE
	SYNTAX Unsigned32 (1..100)
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
	"Percent used to calculate jitter in p-percentile method. 
	 Reported jitter is the percent-th member in the array with sorted jitters. 
         Relevant only for p-percentile method.
         Value in range of 1..100 is for percentile jitter method of calculation.
         Value 101 describes that peakToPeak jitter method of calculation is used.
         Value 102 describes that variance jitter method of calculation is used.
         Only values inside the 1..100 range can be set to this parameter."
	::= { prvtSaaY1731PmTestEntry 22 }

prvtSaaY1731PmTestPriority OBJECT-TYPE
	SYNTAX Unsigned32 (0..7)
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
	"Defines the priority of the packets sent by the SAA Y1731 Pm test
	(priority to count user traffic)."
	::= { prvtSaaY1731PmTestEntry 23 }


prvtSaaY1731PmTestRowStatus OBJECT-TYPE
	SYNTAX RowStatus
	MAX-ACCESS read-create
	STATUS current
	DESCRIPTION
	"The status of the row.
	 The writable columns in a row can not be changed if the row
	 is active. Certain columns must have a valid value before a row
	 can be activated."
	::= { prvtSaaY1731PmTestEntry 24 }

prvtSaaY1731PmTestCCMAPSCount OBJECT-TYPE
	SYNTAX TruthValue
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
	"Determines whether to include proactive OAM frames for ETH-CC and ETH-APS in loss measurement counters or not."
	DEFVAL { false }
	::= { prvtSaaY1731PmTestEntry 25 }

prvtSaaY1731PmTestLossMeasurementType  OBJECT-TYPE
	SYNTAX INTEGER
        {
		lmm ( 0 ),
		slm ( 1 )
	}
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
	"If set to 1 Synthetic Loss Measurement will be used for frame-loss calculations.If set 0 user packets will be used for frame-loss calculations"
	DEFVAL { 0 }
	::= { prvtSaaY1731PmTestEntry 26 }	

prvtSaaY1731PmTestSLMTransmit                      OBJECT-TYPE
	SYNTAX TruthValue
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
	"If set true the device is capable of sending SLM packets and frame-loss calculations. This must be used only when loss measurement type is SLM"
	DEFVAL { false }
	::= { prvtSaaY1731PmTestEntry 27 }
	
prvtSaaY1731PmTestTestId                  OBJECT-TYPE
	SYNTAX Unsigned32 (0..4095)
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
	"Specify the unique test id used in Y1731 SLM. 0 means not set.It is mandatory for the Y1731 SLM test"
	DEFVAL { 0 }
	::= { prvtSaaY1731PmTestEntry 28 }
	
prvtSaaY1731PmTestDropEligible OBJECT-TYPE
	SYNTAX TruthValue
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
	"Drop Eligible flag for S-VLAN used for the Y1731 SLM  test."
	DEFVAL { false }
	::= { prvtSaaY1731PmTestEntry 29 }
	
prvtSaaY1731PmTestDataSize                OBJECT-TYPE
	SYNTAX  Unsigned32 (64..1518)
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
	"Packet sizes for Y1731 SLM test"
	DEFVAL { 64 }
	::= { prvtSaaY1731PmTestEntry  30 }

prvtSaaY1731PmTestCountAllPriorities OBJECT-TYPE
	SYNTAX TruthValue
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
	"Measure for all priorities."
	DEFVAL { false }
	::= { prvtSaaY1731PmTestEntry 31 }

-- ***********************************************
-- **************** RFC2544 TEST *****************
-- ***********************************************
prvtSaaRFC2544ThroughputTestTable OBJECT-TYPE
    SYNTAX SEQUENCE OF PrvtSaaRFC2544ThroughputTestEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table holds the configuration for a SAA RFC2544 test"
    ::= { prvtSaaTest 2 }

prvtSaaRFC2544ThroughputTestEntry OBJECT-TYPE
	SYNTAX PrvtSaaRFC2544ThroughputTestEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
	"NONE"
	INDEX {
		prvtSaaRFC2544ThroughputTestOwner,
		prvtSaaRFC2544ThroughputTestName
              }
	::= { prvtSaaRFC2544ThroughputTestTable 1 }

PrvtSaaRFC2544ThroughputTestEntry ::= SEQUENCE {
	prvtSaaRFC2544ThroughputTestOwner		SnmpAdminString,
	prvtSaaRFC2544ThroughputTestName		SnmpAdminString,
        prvtSaaRFC2544ThroughputTestType 		INTEGER,
	prvtSaaRFC2544ThroughputTestExecStatus		INTEGER,
	prvtSaaRFC2544ThroughputTestSourceType		INTEGER,
        prvtSaaRFC2544ThroughputTestSource		OCTET STRING,
        prvtSaaRFC2544ThroughputTestTargetType		INTEGER,
        prvtSaaRFC2544ThroughputTestTarget		OCTET STRING,
	prvtSaaRFC2544ThroughputTestTimeout		Unsigned32,
        prvtSaaRFC2544ThroughputTestCIR			Unsigned32,
        prvtSaaRFC2544ThroughputTestCBS			Unsigned32,
	prvtSaaRFC2544ThroughputTestBurstPercentage	Unsigned32,
	prvtSaaRFC2544ThroughputTestDuration		Unsigned32,
	prvtSaaRFC2544ThroughputTestMaxFrameloss	Unsigned32,
        prvtSaaRFC2544ThroughputTestCVLAN0		Unsigned32,
	prvtSaaRFC2544ThroughputTestCVLAN0Priority	Unsigned32,
	prvtSaaRFC2544ThroughputTestCVLAN0DropEligible	TruthValue,
	prvtSaaRFC2544ThroughputTestSVLAN		Unsigned32,
	prvtSaaRFC2544ThroughputTestSVLANPriority	Unsigned32,
	prvtSaaRFC2544ThroughputTestSVLANDropEligible	TruthValue,
	prvtSaaRFC2544ThroughputTestPDUSize		DisplayString,
	prvtSaaRFC2544ThroughputTestACKTimeout		Unsigned32,
	prvtSaaRFC2544ThroughputTestLoopbackType 	INTEGER,
	prvtSaaRFC2544ThroughputTestPaternType 		INTEGER,
	prvtSaaRFC2544ThroughputTestRowStatus		RowStatus,
	prvtSaaRFC2544ThroughputTestEthertype       OCTET STRING
}

prvtSaaRFC2544ThroughputTestOwner OBJECT-TYPE
    SYNTAX      SnmpAdminString (SIZE(0..32))
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       "This string is used to describe the owner of the
       RFC2544 SAA test."
    ::= { prvtSaaRFC2544ThroughputTestEntry 1 }

prvtSaaRFC2544ThroughputTestName OBJECT-TYPE
    SYNTAX      SnmpAdminString (SIZE(0..32))
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       "This string is used to describe the test name for the
       RFC2544 SAA test. It is also used as a test identifier."
    ::= { prvtSaaRFC2544ThroughputTestEntry 2 }

prvtSaaRFC2544ThroughputTestType OBJECT-TYPE
	SYNTAX INTEGER
        {
		unidirectionalTestHead( 1 ),
                bidirectionalTestHead ( 2 ),
		testTail( 3 ),
		testLoopback( 4 )
	}
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
	"SAA RFC2544 Throughput test type"
	::= { prvtSaaRFC2544ThroughputTestEntry 3 }

prvtSaaRFC2544ThroughputTestExecStatus OBJECT-TYPE
	SYNTAX INTEGER
	{
		notRunning ( 1 ),
		running ( 2 )
	}
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"SAA RFC2544 Throughput test execution status."
	DEFVAL { notRunning }
	::= { prvtSaaRFC2544ThroughputTestEntry 4 }


prvtSaaRFC2544ThroughputTestSourceType OBJECT-TYPE
	SYNTAX INTEGER
        {
		none( 0 ),
		mac ( 1 ),
		mep ( 2 )
	}
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"SAA RFC2544 Throughput test source type."
	::= { prvtSaaRFC2544ThroughputTestEntry 5 }

prvtSaaRFC2544ThroughputTestSource OBJECT-TYPE
	SYNTAX OCTET STRING (SIZE(1..17))
	MAX-ACCESS read-create
	STATUS current
	DESCRIPTION
	"String that holds either the MAC or the MEP ID.
	 MAC should be in the format AA:BB:CC:DD:EE:FF
	 MEP shold be in the format DOMAIN:MA:MEP that represent 
	 the values corresponding to dot1agCfmMdIndex, 
	 dot1agCfmMaIndex and dot1agCfmMepIdentifier from 
	 IEEE8021-CFM-MIB.
	 e.g.:
		MAC:   00:A0:12:5C:12:C0
		MEP:   1:1:2"
	::= { prvtSaaRFC2544ThroughputTestEntry 6 }

prvtSaaRFC2544ThroughputTestTargetType OBJECT-TYPE
	SYNTAX INTEGER
        {
		none( 0 ),
		mac ( 1 ),
		mep ( 2 )
	}
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"SAA RFC2544 Throughput test target type."
	::= { prvtSaaRFC2544ThroughputTestEntry 7 }

prvtSaaRFC2544ThroughputTestTarget OBJECT-TYPE
	SYNTAX OCTET STRING (SIZE(1..17))
	MAX-ACCESS read-create
	STATUS current
	DESCRIPTION
	"String that holds either the MAC or the MEP ID.
	 MAC should be in the format AA:BB:CC:DD:EE:FF
	 MEP shold be in the format DOMAIN:MA:MEP that represent 
	 the values corresponding to dot1agCfmMdIndex, 
	 dot1agCfmMaIndex and dot1agCfmMepIdentifier from 
	 IEEE8021-CFM-MIB.
	 e.g.:
		MAC:   00:A0:12:5C:12:C0
		MEP:   1:1:2"
	::= { prvtSaaRFC2544ThroughputTestEntry 8 }

prvtSaaRFC2544ThroughputTestTimeout OBJECT-TYPE
	SYNTAX Unsigned32 (0..100)
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
	"SAA RFC2544 Throughput test timeout, in 0.1 of a second increments"
	DEFVAL { 10 }
	::= { prvtSaaRFC2544ThroughputTestEntry 9 }

prvtSaaRFC2544ThroughputTestCIR OBJECT-TYPE
	SYNTAX Unsigned32 (64..1000000)
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
	"SAA RFC2544 Throughput Committed Information Rate (CIR) value."
	::= { prvtSaaRFC2544ThroughputTestEntry 10 }

prvtSaaRFC2544ThroughputTestCBS OBJECT-TYPE
	SYNTAX Unsigned32 (10..2048)
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
	"SAA RFC2544 Throughput Committed Burst Size (CBS) value."
	::= { prvtSaaRFC2544ThroughputTestEntry 11 }

prvtSaaRFC2544ThroughputTestBurstPercentage OBJECT-TYPE
	SYNTAX Unsigned32 (0..100)
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
	"Part of CIR to use for bursts(CBS)."
	::= { prvtSaaRFC2544ThroughputTestEntry 12 }

prvtSaaRFC2544ThroughputTestDuration OBJECT-TYPE
	SYNTAX Unsigned32 (1..180)
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
	"The SAA RFC2544 Throughput test duration, in seconds."
	::= { prvtSaaRFC2544ThroughputTestEntry 13 }

prvtSaaRFC2544ThroughputTestMaxFrameloss OBJECT-TYPE
	SYNTAX Unsigned32 (0..100000)
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
	"The maximum frameloss to declare a successful 
	SAA RFC2544 Throughput test in 0.001 of a percent."
	::= { prvtSaaRFC2544ThroughputTestEntry 14 }

prvtSaaRFC2544ThroughputTestCVLAN0 OBJECT-TYPE
	SYNTAX Unsigned32 (0..4094)
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
	"C-VLAN ID for the SAA RFC2544 Throughput test."
	::= { prvtSaaRFC2544ThroughputTestEntry 15 }

prvtSaaRFC2544ThroughputTestCVLAN0Priority OBJECT-TYPE
	SYNTAX Unsigned32 (0..7)
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
	"VPT for C-VLAN0 for the SAA RFC2544 Throughput test."
	::= { prvtSaaRFC2544ThroughputTestEntry 16 }

prvtSaaRFC2544ThroughputTestCVLAN0DropEligible OBJECT-TYPE
	SYNTAX TruthValue
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
	"Drop Eligible flag for C-VLAN0 for the SAA RFC2544 Throughput test."
	::= { prvtSaaRFC2544ThroughputTestEntry 17 }

prvtSaaRFC2544ThroughputTestSVLAN OBJECT-TYPE
	SYNTAX Unsigned32 (0..4094)
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"S-VLAN ID for the SAA RFC2544 Throughput test."
	::= { prvtSaaRFC2544ThroughputTestEntry 18 }

prvtSaaRFC2544ThroughputTestSVLANPriority OBJECT-TYPE
	SYNTAX Unsigned32 (0..7)
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
	"VPT for S-VLAN0 for the SAA RFC2544 Throughput test."
	::= { prvtSaaRFC2544ThroughputTestEntry 19 }

prvtSaaRFC2544ThroughputTestSVLANDropEligible OBJECT-TYPE
	SYNTAX TruthValue
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
	"Drop Eligible flag for S-VLAN0 for the SAA RFC2544 Throughput test."
	::= { prvtSaaRFC2544ThroughputTestEntry 20 }

prvtSaaRFC2544ThroughputTestPDUSize OBJECT-TYPE
	SYNTAX DisplayString (SIZE(3))
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
	"Bitmask with predefined packet sizes for SAA RFC2544 Throughput test:
	   64,128,256,512,1024,1280,1518,1530,2000,9000 (LSB set=64...10th bit set =9000)"
	::= { prvtSaaRFC2544ThroughputTestEntry 21 }

prvtSaaRFC2544ThroughputTestACKTimeout OBJECT-TYPE
	SYNTAX Unsigned32 (1..60)
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
	"Defines the timeout for a SAA RFC2544 Throughput test tail to send an ACK MCC."
	::= { prvtSaaRFC2544ThroughputTestEntry 22 }

prvtSaaRFC2544ThroughputTestLoopbackType OBJECT-TYPE
	SYNTAX INTEGER
        {
		macSwap ( 1 ),
                oam ( 2 )
	}
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
	"SAA RFC2544 Throughput test loopback type."
	::= { prvtSaaRFC2544ThroughputTestEntry 23 }

prvtSaaRFC2544ThroughputTestPaternType OBJECT-TYPE
	SYNTAX INTEGER
        {
		null ( 1 ),
                nullCRC ( 2 ),
		prbs ( 3 ),
                prbsCRC ( 4 ),
                none ( 8 )
	}
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
	"SAA RFC2544 Throughput test patern type.
	 Options for it are none, null, null-crc, prbs, prbs-crc."
	::= { prvtSaaRFC2544ThroughputTestEntry 24 }

prvtSaaRFC2544ThroughputTestRowStatus OBJECT-TYPE
	SYNTAX RowStatus
	MAX-ACCESS read-create
	STATUS current
	DESCRIPTION
	"The status of the row entry.
	 The writable columns in a row can not be changed if the row
	 is active. Certain columns must have a valid value before a row
	 can be activated."
	::= { prvtSaaRFC2544ThroughputTestEntry 25 }    
	 
prvtSaaRFC2544ThroughputTestEthertype OBJECT-TYPE
	SYNTAX OCTET STRING
	MAX-ACCESS read-create
	STATUS current
	DESCRIPTION "SAA RFC2544 Throughput test Ethertype."    
	DEFVAL { '8902'H }
	::= { prvtSaaRFC2544ThroughputTestEntry 26 }


	
-- ***********************************************
-- ************ Y1731 LOOPBACK TEST **************
-- ***********************************************

prvtSaaY1731LoopbackTestTable OBJECT-TYPE
    SYNTAX SEQUENCE OF PrvtSaaY1731LoopbackTestEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table holds the configuration for a SAA Y1731 Loopback test.
		It describes the FPGA configuration."
    ::= { prvtSaaTest 3 }

prvtSaaY1731LoopbackTestEntry OBJECT-TYPE
	SYNTAX PrvtSaaY1731LoopbackTestEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
	"NONE"
	INDEX {
			prvtSaaY1731LoopbackTestEncapType,
			prvtSaaY1731LoopbackTestEncapValue
          }
	::= { prvtSaaY1731LoopbackTestTable 1 }

PrvtSaaY1731LoopbackTestEntry ::= SEQUENCE {
	prvtSaaY1731LoopbackTestEncapType 			INTEGER,
	prvtSaaY1731LoopbackTestEncapValue			Unsigned32,
	prvtSaaY1731LoopbackTestUserPort			Unsigned32,
	prvtSaaY1731LoopbackTestUplinkPort			Unsigned32,
	prvtSaaY1731LoopbackTestType				INTEGER,
	prvtSaaY1731LoopbackTestRowStatus			RowStatus,
	prvtSaaY1731LoopbackTestCCMAPSCount         		TruthValue,  
	prvtSaaY1731LoopbackTestCountAllPriorities         	TruthValue
}

prvtSaaY1731LoopbackTestEncapType OBJECT-TYPE
	SYNTAX INTEGER
	{
		service	( 1 ),
		vlan ( 2 )
	}
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
	"SAA Y1731 Loopback test encapsulation type.
	It can be either test over VLAN or test over Service.
	The value 1 is the default value representing that neither
	type is set."
	::= { prvtSaaY1731LoopbackTestEntry 1 }
	
prvtSaaY1731LoopbackTestEncapValue OBJECT-TYPE
	SYNTAX Unsigned32 (0..10000) 
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
	"The value of the defined SAA Y1731 Lopback test encapsulation.
	It should be either the Vlan ID or the Service ID, depending 
	on the type set in prvtSaaY1731LoopbackTestEncapType."
	::= { prvtSaaY1731LoopbackTestEntry 2 }

prvtSaaY1731LoopbackTestUserPort OBJECT-TYPE
	SYNTAX Unsigned32
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
	"For SAA Y1731 Loopback test, this leaf is used only in case the encapsulation 
	is VLAN type and it determines the port on which the user is connected."
	::= { prvtSaaY1731LoopbackTestEntry 3 }

prvtSaaY1731LoopbackTestUplinkPort OBJECT-TYPE
	SYNTAX Unsigned32
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
	"For SAA Y1731 Loopback test, this leaf is used only in case the encapsulation 
	is VLAN type and it determines the port that the SAA test devices are 
	connected through."
	::= { prvtSaaY1731LoopbackTestEntry 4 }

prvtSaaY1731LoopbackTestType OBJECT-TYPE
	SYNTAX INTEGER
    {
		none ( 1 ),
		frameloss ( 2 ),
		delayvariation ( 3 ),
		framelossAndDelayvariation ( 4 )
	}
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
	"SAA Y1731 Loopback test type. Specifies the test being perfoer"
	::= { prvtSaaY1731LoopbackTestEntry 5 }

	
prvtSaaY1731LoopbackTestRowStatus OBJECT-TYPE
	SYNTAX RowStatus
	MAX-ACCESS read-create
	STATUS current
	DESCRIPTION
	"The status of the row entry.
	 The writable columns in a row can not be changed if the row
	 is active. Certain columns must have a valid value before a row
	 can be activated."
	::= { prvtSaaY1731LoopbackTestEntry 6 }     


prvtSaaY1731LoopbackTestCCMAPSCount OBJECT-TYPE
	SYNTAX TruthValue
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
	"Determines whether to include proactive OAM frames for ETH-CC and ETH-APS in loss measurement counters or not."
	DEFVAL { false }
	::= { prvtSaaY1731LoopbackTestEntry 7}

prvtSaaY1731LoopbackTestCountAllPriorities OBJECT-TYPE
	SYNTAX TruthValue
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
	"Determines whether to count all packets ignoring the priority."
	DEFVAL { false }
	::= { prvtSaaY1731LoopbackTestEntry 8}

-- ***********************************************
-- ************ Y1731 PM TEST RESULT *************
-- ***********************************************
prvtSaaY1731TestResultTable OBJECT-TYPE
	SYNTAX SEQUENCE OF PrvtSaaY1731TestResultEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
	"This table contains SAA results for Y1731 tests."
	::= { prvtSaaTestResult 1 }

prvtSaaY1731TestResultEntry OBJECT-TYPE
	SYNTAX PrvtSaaY1731TestResultEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION	"NONE"
	INDEX { prvtSaaY1731PmTestOwner,
		prvtSaaY1731PmTestName,
		prvtSaaY1731TestResultIndex }
	::= { prvtSaaY1731TestResultTable 1 }

PrvtSaaY1731TestResultEntry ::= SEQUENCE {
	prvtSaaY1731TestResultIndex 			Unsigned32,
	prvtSaaY1731TestResultDelayNE			Unsigned32,
        prvtSaaY1731TestResultDelayFE			Unsigned32,
	prvtSaaY1731TestResultJitterNE			Unsigned32,
	prvtSaaY1731TestResultJitterFE			Unsigned32,
	prvtSaaY1731TestResultFrameLossNE		Unsigned32,
        prvtSaaY1731TestResultFrameLossFE		Unsigned32,
	prvtSaaY1731TestResultFramesSentNE		Counter32,
	prvtSaaY1731TestResultFramesSentFE		Counter32,
	prvtSaaY1731TestResultFramesRcvdNE		Counter32,
	prvtSaaY1731TestResultFramesRcvdFE		Counter32,
	prvtSaaY1731TestResultPacketsSent		Counter32,
	prvtSaaY1731TestResultNoTimeouts		Unsigned32,
	prvtSaaY1731TestResultNoErrors			Unsigned32,
	prvtSaaY1731TestResultCompletionTime		Unsigned32
}

prvtSaaY1731TestResultIndex OBJECT-TYPE
	SYNTAX Unsigned32
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
	"SAA Y1731 test results table index"
	::= { prvtSaaY1731TestResultEntry 1 }

prvtSaaY1731TestResultDelayNE OBJECT-TYPE
	SYNTAX Unsigned32
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"Near end delay result in 0.01 of a microsecond"
	::= { prvtSaaY1731TestResultEntry 2 }

prvtSaaY1731TestResultDelayFE OBJECT-TYPE
	SYNTAX Unsigned32
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"Far end delay result in 0.01 of a microsecond"
	::= { prvtSaaY1731TestResultEntry 3 }

prvtSaaY1731TestResultJitterNE OBJECT-TYPE
	SYNTAX Unsigned32
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"Near end jitter result in 0.01 of a microsecond"
	::= { prvtSaaY1731TestResultEntry 4 }

prvtSaaY1731TestResultJitterFE OBJECT-TYPE
	SYNTAX Unsigned32
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"Far end jitter result in 0.01 of a microsecond"
	::= { prvtSaaY1731TestResultEntry 5 }

prvtSaaY1731TestResultFrameLossNE OBJECT-TYPE
	SYNTAX Unsigned32
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"Near end frame-loss result in 0.0000001 of a percent"
	::= { prvtSaaY1731TestResultEntry 6 }

prvtSaaY1731TestResultFrameLossFE OBJECT-TYPE
	SYNTAX Unsigned32
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"Far end frame-loss result in 0.0000001 of a percent"
	::= { prvtSaaY1731TestResultEntry 7 }

prvtSaaY1731TestResultFramesSentNE OBJECT-TYPE
	SYNTAX Counter32
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"Near end sent frames"
	::= { prvtSaaY1731TestResultEntry 8 }

prvtSaaY1731TestResultFramesSentFE OBJECT-TYPE
	SYNTAX Counter32
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"Far end sent frames"
	::= { prvtSaaY1731TestResultEntry 9 }

prvtSaaY1731TestResultFramesRcvdNE OBJECT-TYPE
	SYNTAX Counter32
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"Near end received frames"
	::= { prvtSaaY1731TestResultEntry 10 }

prvtSaaY1731TestResultFramesRcvdFE OBJECT-TYPE
	SYNTAX Counter32
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"Far end received frames"
	::= { prvtSaaY1731TestResultEntry 11 }

prvtSaaY1731TestResultPacketsSent OBJECT-TYPE
	SYNTAX Counter32
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"The test packets sent between devices"
	::= { prvtSaaY1731TestResultEntry 12 }

prvtSaaY1731TestResultNoTimeouts OBJECT-TYPE
	SYNTAX Unsigned32
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"Number of timeouts for the SAA Y1731 Pm test"
	::= { prvtSaaY1731TestResultEntry 13 }

prvtSaaY1731TestResultNoErrors OBJECT-TYPE
	SYNTAX Unsigned32
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"Number of errors for the SAA Y1731 Pm test"
	::= { prvtSaaY1731TestResultEntry 14 }

prvtSaaY1731TestResultCompletionTime OBJECT-TYPE
	SYNTAX Unsigned32
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
        "Completion time in seconds for the SAA Y1731 PM test."
	::= { prvtSaaY1731TestResultEntry 15 }

-- ***********************************************
-- ************* RFC2544 TEST RESULT *************
-- ***********************************************

prvtSaaRFC2544TestResultTable OBJECT-TYPE
	SYNTAX SEQUENCE OF PrvtSaaRFC2544TestResultEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
        "This table contains SAA results for RFC2544 tests."
	::= { prvtSaaTestResult 2 }

prvtSaaRFC2544TestResultEntry OBJECT-TYPE
	SYNTAX PrvtSaaRFC2544TestResultEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION	"NONE"
	INDEX { prvtSaaRFC2544ThroughputTestOwner,
		prvtSaaRFC2544ThroughputTestName,
		prvtSaaRFC2544TestResultIndex }
	::= { prvtSaaRFC2544TestResultTable 1 }

PrvtSaaRFC2544TestResultEntry ::= SEQUENCE {
	prvtSaaRFC2544TestResultIndex 			Unsigned32,
	prvtSaaRFC2544TestResultFrameSize		Unsigned32,
	prvtSaaRFC2544TestResultFrameLoss		Unsigned32,
	prvtSaaRFC2544TestResultThroughput		Unsigned32,
	prvtSaaRFC2544TestResultNetThroughput		Unsigned32,
	prvtSaaRFC2544TestResultStatus			INTEGER,
        prvtSaaRFC2544TestResultDelayMinimum            Unsigned32,
        prvtSaaRFC2544TestResultDelayAverage            Unsigned32,
        prvtSaaRFC2544TestResultDelayMaximum            Unsigned32
}

prvtSaaRFC2544TestResultIndex OBJECT-TYPE
	SYNTAX Unsigned32
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
	"SAA RFC2544 Throughput test results table index.
	Index will take values 1 to 9, each value representing a frame size
	from this list: 64,128,256,512,1024,1280,1518,2000,9000.
	The leaf prvtSaaRFC2544TestResultFrameSize will present this value
	in a more user-friendly way."
	::= { prvtSaaRFC2544TestResultEntry 1 }

prvtSaaRFC2544TestResultFrameSize OBJECT-TYPE
	SYNTAX Unsigned32
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"Frame size of the SAA RFC2544 test.
	Possible values are: 64,128,256,512,1024,1280,1518,2000,9000"
	::= { prvtSaaRFC2544TestResultEntry 2 }

prvtSaaRFC2544TestResultFrameLoss OBJECT-TYPE
	SYNTAX Unsigned32
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"Frame loss of the SAA RFC2544 test measured in 0.001 of a percent"
	::= { prvtSaaRFC2544TestResultEntry 3 }

prvtSaaRFC2544TestResultThroughput OBJECT-TYPE
	SYNTAX Unsigned32
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"Throughput of the SAA RFC2544 test measured in Kbps"
	::= { prvtSaaRFC2544TestResultEntry 4 }

prvtSaaRFC2544TestResultNetThroughput OBJECT-TYPE
	SYNTAX Unsigned32
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"The actual throughput of the SAA RFC2544 test 
	containing only user data. It is measured in Kbps."
	::= { prvtSaaRFC2544TestResultEntry 5 }

prvtSaaRFC2544TestResultStatus OBJECT-TYPE
        SYNTAX INTEGER
        {
                notAvailable ( 1 ),
                ready ( 2 ),
                error ( 3 )
        }
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"Status of the SAA RFC2544 test"
	::= { prvtSaaRFC2544TestResultEntry 6 }

prvtSaaRFC2544TestResultDelayMinimum OBJECT-TYPE
        SYNTAX Unsigned32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
        "Minimum delay for SAA RFC2544 test measured in 1/100th of a microsecond."
        ::= { prvtSaaRFC2544TestResultEntry 7 }

prvtSaaRFC2544TestResultDelayAverage OBJECT-TYPE
        SYNTAX Unsigned32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
        "Average delay for SAA RFC2544 test measured in 1/100th of a microsecond."
        ::= { prvtSaaRFC2544TestResultEntry 8 }

prvtSaaRFC2544TestResultDelayMaximum OBJECT-TYPE
        SYNTAX Unsigned32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
        "Maximum delay for SAA RFC2544 test measured in 1/100th of a microsecond."
        ::= { prvtSaaRFC2544TestResultEntry 9 }

-- ***********************************************
-- ****************** PROFILES *******************
-- ***********************************************
prvtSaaProfileTable OBJECT-TYPE
	SYNTAX SEQUENCE OF PrvtSaaProfileEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
	"Table contains SAA thresholds."
	::= { prvtSaaProfiles 1 }

prvtSaaProfileEntry OBJECT-TYPE
	SYNTAX PrvtSaaProfileEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION	"NONE"
	INDEX { prvtSaaProfileIndex }
	::= { prvtSaaProfileTable 1 }

PrvtSaaProfileEntry ::= SEQUENCE {
	prvtSaaProfileIndex			Unsigned32,
        prvtSaaProfileDelayNE			Unsigned32,
        prvtSaaProfileDelayFE			Unsigned32,
	prvtSaaProfileJitterNE			Unsigned32,
	prvtSaaProfileJitterFE			Unsigned32,
	prvtSaaProfileFrameLossNE		Unsigned32,
        prvtSaaProfileFrameLossFE		Unsigned32,
        prvtSaaProfileRowStatus                 RowStatus,
        prvtSaaProfileName                      OCTET STRING
       }

prvtSaaProfileIndex OBJECT-TYPE
	SYNTAX Unsigned32 (1..2147483647)
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
	"SAA profile table index."
	::= { prvtSaaProfileEntry 1 }

prvtSaaProfileDelayNE OBJECT-TYPE
	SYNTAX Unsigned32 (1..60000000)
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
	"Near end delay in microseconds"
	DEFVAL          {1000000}
	::= { prvtSaaProfileEntry 2 }

prvtSaaProfileDelayFE OBJECT-TYPE
	SYNTAX Unsigned32 (1..60000000)
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
	"Far end delay in microseconds"
	DEFVAL          {1000000}
	::= { prvtSaaProfileEntry 3 }

prvtSaaProfileJitterNE OBJECT-TYPE
	SYNTAX Unsigned32 (1..60000000)
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
	"Near end jitter in microseconds"
	DEFVAL          {300000}
	::= { prvtSaaProfileEntry 4 }

prvtSaaProfileJitterFE OBJECT-TYPE
	SYNTAX Unsigned32 (1..60000000)
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
	"Far end jitter in microseconds"
	DEFVAL          {300000}
	::= { prvtSaaProfileEntry 5 }

prvtSaaProfileFrameLossNE OBJECT-TYPE
	SYNTAX Unsigned32 (0..100000)
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
	"Near end frame-loss measured in 0.001 of percent"
	DEFVAL          {8000}
	::= { prvtSaaProfileEntry 6 }

prvtSaaProfileFrameLossFE OBJECT-TYPE
	SYNTAX Unsigned32 (0..100000)
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
	"Far end frame-loss measured in 0.001 of percent"
	DEFVAL          {8000}
	::= { prvtSaaProfileEntry 7 }

prvtSaaProfileRowStatus OBJECT-TYPE
	SYNTAX RowStatus
	MAX-ACCESS read-create
	STATUS current
	DESCRIPTION
	"Creation/delete/edit of the SAA profile. "
	::= { prvtSaaProfileEntry 8 }

prvtSaaProfileName OBJECT-TYPE
        SYNTAX OCTET STRING (SIZE(0..32))
        MAX-ACCESS read-create
        STATUS current
        DESCRIPTION
        "Name assigned to the SAA profile."
        DEFVAL { '00'H }
        ::= { prvtSaaProfileEntry 9 }


-- ***********************************************
-- **************** Notification *****************
-- ***********************************************

prvtSaaRFC2544ProbeFailed NOTIFICATION-TYPE
	OBJECTS {
		prvtSaaRFC2544ThroughputTestType,
		prvtSaaRFC2544TestResultStatus
	}
	STATUS current
	DESCRIPTION
		"This trap should be sent whenever a SAA probe
		on a specific test fails."
	::= { prvtSaaNotifications 1 }

prvtSaaRFC2544ProbeSuccess NOTIFICATION-TYPE
	OBJECTS {
		prvtSaaRFC2544ThroughputTestType,
		prvtSaaRFC2544TestResultStatus
	}
	STATUS current
	DESCRIPTION
		"This trap should be sent whenever a SAA probe
		on a specific test finishes with success."
	::= { prvtSaaNotifications 2 }

prvtSaaRFC2544TestFinished NOTIFICATION-TYPE
	OBJECTS {
		prvtSaaRFC2544ThroughputTestExecStatus
	}
	STATUS current
	DESCRIPTION
		"This trap should be sent whenever a SAA RFC2544 test is finished"
	::= { prvtSaaNotifications 3 }

prvtSaaY1731DelayNEThreshold NOTIFICATION-TYPE
	OBJECTS {
		prvtSaaY1731TestResultDelayNE,
		prvtSaaProfileDelayNE
	}
	STATUS current
	DESCRIPTION
		"This trap should be sent whenever the near end delay
		on a SAA Y1731 test will surpass one of the 2 defined 
		thresholds."
	::= { prvtSaaNotifications 4 }

prvtSaaY1731DelayFEThreshold NOTIFICATION-TYPE
	OBJECTS {
		prvtSaaY1731TestResultDelayFE,
		prvtSaaProfileDelayFE
	}
	STATUS current
	DESCRIPTION
		"This trap should be sent whenever the far end delay
		on a SAA Y1731 test will surpass one of the 2 defined 
		thresholds."
	::= { prvtSaaNotifications 5 }

prvtSaaY1731JitterNEThreshold NOTIFICATION-TYPE
	OBJECTS {
		prvtSaaY1731TestResultJitterNE,
		prvtSaaProfileJitterNE
	}
	STATUS current
	DESCRIPTION
		"This trap should be sent whenever the near end jitter 
		on a SAA Y1731 test will surpass one of the 2 defined 
		thresholds."
	::= { prvtSaaNotifications 6 }

prvtSaaY1731JitterFEThreshold NOTIFICATION-TYPE
	OBJECTS {
		prvtSaaY1731TestResultJitterFE,
		prvtSaaProfileJitterFE
	}
	STATUS current
	DESCRIPTION
		"This trap should be sent whenever the far end jitter
		on a SAA Y1731 test will surpass one of the 2 defined 
		thresholds."
	::= { prvtSaaNotifications 7 }

prvtSaaY1731FrLossNEThreshold NOTIFICATION-TYPE
	OBJECTS {
		prvtSaaY1731TestResultFrameLossNE,
		prvtSaaProfileFrameLossNE
	}
	STATUS current
	DESCRIPTION
		"This trap should be sent whenever the near end frameloss
		on a SAA Y1731 test will surpass one of the 2 defined 
		thresholds."
	::= { prvtSaaNotifications 8 }

prvtSaaY1731FrLossFEThreshold NOTIFICATION-TYPE
	OBJECTS {
		prvtSaaY1731TestResultFrameLossFE,
		prvtSaaProfileFrameLossFE
	}
	STATUS current
	DESCRIPTION
		"This trap should be sent whenever the far end frameloss
		on a SAA Y1731 test will surpass one of the 2 defined 
		thresholds."
	::= { prvtSaaNotifications 9 }


-- ******************************************************************
-- PRVT-RING-EPS MIB Module - Conformance Information
-- ******************************************************************

prvtSaaCompliances OBJECT IDENTIFIER ::= { prvtSaaConformance 1 }
prvtSaaGroups      OBJECT IDENTIFIER ::= { prvtSaaConformance 2 }

-- ******************************************************************
-- Units of conformance
-- ******************************************************************

prvtSaaY1731TestGroup OBJECT-GROUP
    OBJECTS {
	prvtSaaY1731PmTestType,
	prvtSaaY1731PmTestExecStatus,
	prvtSaaY1731PmTestEncapType,
        prvtSaaY1731PmTestEncapValue,
	prvtSaaY1731PmTestUserPort,
	prvtSaaY1731PmTestUplinkPort,
	prvtSaaY1731PmTestTargetMac,
	prvtSaaY1731PmTestCfmDomainLevel,
        prvtSaaY1731PmTestRemoteCfmMep,
	prvtSaaY1731PmTestProfile,
        prvtSaaY1731PmTestHistoryDepth,
	prvtSaaY1731PmTestPeriod,
        prvtSaaY1731PmTestTimeout,
	prvtSaaY1731PmTestMonitorInterval,
	prvtSaaY1731PmTestFrequency,
	prvtSaaY1731PmTestClocksInSync,
	prvtSaaY1731PmTestDelayMethod,
	prvtSaaY1731PmTestDelayPvalue,
	prvtSaaY1731PmTestJitterMethod,
	prvtSaaY1731PmTestJitterPvalue,
	prvtSaaY1731PmTestPriority,
	prvtSaaY1731PmTestCCMAPSCount,
	prvtSaaY1731PmTestLossMeasurementType,
	prvtSaaY1731PmTestSLMTransmit,
	prvtSaaY1731PmTestTestId,
	prvtSaaY1731PmTestDropEligible,
	prvtSaaY1731PmTestDataSize,
	prvtSaaY1731PmTestRowStatus,
	prvtSaaY1731PmTestCountAllPriorities

	}
    STATUS      current
    DESCRIPTION
       "Objects for the SAA Y1731 test group."
    ::= { prvtSaaGroups 1 }

prvtSaaRFC2544TestGroup OBJECT-GROUP
    OBJECTS {
        prvtSaaRFC2544ThroughputTestType,
	prvtSaaRFC2544ThroughputTestExecStatus,
	prvtSaaRFC2544ThroughputTestSourceType,
        prvtSaaRFC2544ThroughputTestSource,
        prvtSaaRFC2544ThroughputTestTargetType,
        prvtSaaRFC2544ThroughputTestTarget,
	prvtSaaRFC2544ThroughputTestTimeout,
        prvtSaaRFC2544ThroughputTestCIR,
        prvtSaaRFC2544ThroughputTestCBS,
	prvtSaaRFC2544ThroughputTestBurstPercentage,
	prvtSaaRFC2544ThroughputTestDuration,
	prvtSaaRFC2544ThroughputTestMaxFrameloss,
        prvtSaaRFC2544ThroughputTestCVLAN0,
	prvtSaaRFC2544ThroughputTestCVLAN0Priority,
	prvtSaaRFC2544ThroughputTestCVLAN0DropEligible,
	prvtSaaRFC2544ThroughputTestSVLAN,
	prvtSaaRFC2544ThroughputTestSVLANPriority,
	prvtSaaRFC2544ThroughputTestSVLANDropEligible,
	prvtSaaRFC2544ThroughputTestPDUSize,
	prvtSaaRFC2544ThroughputTestACKTimeout,
	prvtSaaRFC2544ThroughputTestLoopbackType,
	prvtSaaRFC2544ThroughputTestPaternType,
	prvtSaaRFC2544ThroughputTestRowStatus,  
	prvtSaaRFC2544ThroughputTestEthertype
    }
    STATUS      current
    DESCRIPTION
       "Objects for the SAA RFC2544 test group."
    ::= { prvtSaaGroups 2 }

prvtSaaY1731TestResultsGroup OBJECT-GROUP
    OBJECTS {
	prvtSaaY1731TestResultDelayNE,
        prvtSaaY1731TestResultDelayFE,
	prvtSaaY1731TestResultJitterNE,
	prvtSaaY1731TestResultJitterFE,
	prvtSaaY1731TestResultFrameLossNE,
        prvtSaaY1731TestResultFrameLossFE,
	prvtSaaY1731TestResultFramesSentNE,
	prvtSaaY1731TestResultFramesSentFE,
	prvtSaaY1731TestResultFramesRcvdNE,
	prvtSaaY1731TestResultFramesRcvdFE,
	prvtSaaY1731TestResultPacketsSent,
	prvtSaaY1731TestResultNoTimeouts,
	prvtSaaY1731TestResultNoErrors,
	prvtSaaY1731TestResultCompletionTime
    }
    STATUS      current
    DESCRIPTION
       "Objects for the SAA Y1731 test results group."
    ::= { prvtSaaGroups 3 }

prvtSaaRFC2544TestResultsGroup OBJECT-GROUP
    OBJECTS {
	prvtSaaRFC2544TestResultFrameSize,
	prvtSaaRFC2544TestResultFrameLoss,
	prvtSaaRFC2544TestResultThroughput,
	prvtSaaRFC2544TestResultNetThroughput,
	prvtSaaRFC2544TestResultStatus,
        prvtSaaRFC2544TestResultDelayMinimum,
        prvtSaaRFC2544TestResultDelayAverage,
        prvtSaaRFC2544TestResultDelayMaximum
    }
    STATUS      current
    DESCRIPTION
       "Objects for the SAA RFC2544 test results group."
    ::= { prvtSaaGroups 4 }

prvtSaaProfilesGroup OBJECT-GROUP
    OBJECTS {
        prvtSaaProfileDelayNE,
        prvtSaaProfileDelayFE,
	prvtSaaProfileJitterNE,
	prvtSaaProfileJitterFE,
	prvtSaaProfileFrameLossNE,
        prvtSaaProfileFrameLossFE,
        prvtSaaProfileRowStatus,
        prvtSaaProfileName
    }
    STATUS      current
    DESCRIPTION
       "Objects for the SAA profiles group."
    ::= { prvtSaaGroups 5 }

prvtSaaNotificationsGroup NOTIFICATION-GROUP
    NOTIFICATIONS {
      prvtSaaRFC2544ProbeFailed,
      prvtSaaRFC2544ProbeSuccess,
      prvtSaaRFC2544TestFinished,
      prvtSaaY1731DelayNEThreshold,
      prvtSaaY1731DelayFEThreshold,
      prvtSaaY1731JitterNEThreshold,
      prvtSaaY1731JitterFEThreshold,
      prvtSaaY1731FrLossNEThreshold,
      prvtSaaY1731FrLossFEThreshold
    }
    STATUS      current
    DESCRIPTION
       "Objects for the Notifications group."
    ::= { prvtSaaGroups 6 }
    
prvtSaaY1731LoopbackTestGroup OBJECT-GROUP
    OBJECTS {
	prvtSaaY1731LoopbackTestUserPort,
	prvtSaaY1731LoopbackTestUplinkPort,
	prvtSaaY1731LoopbackTestType,
	prvtSaaY1731LoopbackTestCCMAPSCount,
	prvtSaaY1731LoopbackTestRowStatus,
	prvtSaaY1731LoopbackTestCountAllPriorities
    }
    STATUS      current
    DESCRIPTION
       "Objects for the SAA Y1731 Loopback test group."
    ::= { prvtSaaGroups 7 }


-- ******************************************************************
-- MIB Module Compliance statements
-- ******************************************************************

prvtSaaCompliance MODULE-COMPLIANCE
    STATUS      current
    DESCRIPTION
       "The compliance statement for support of the SAA MIB module."
    MODULE
        MANDATORY-GROUPS {
            prvtSaaY1731TestGroup,
	    prvtSaaRFC2544TestGroup,
	    prvtSaaY1731TestResultsGroup,
	    prvtSaaRFC2544TestResultsGroup,
	    prvtSaaProfilesGroup,
	    prvtSaaNotificationsGroup,
	    prvtSaaY1731LoopbackTestGroup
            }

    OBJECT prvtSaaY1731PmTestRowStatus
      SYNTAX       RowStatus { active(1), notInService(2), notReady(3) }
      WRITE-SYNTAX RowStatus { active(1), notInService(2), notReady(3),
                               createAndWait(5), destroy(6) }
      DESCRIPTION "Support for createAndWait is required."

    OBJECT prvtSaaRFC2544ThroughputTestRowStatus
      SYNTAX       RowStatus { active(1), notInService(2), notReady(3) }
      WRITE-SYNTAX RowStatus { active(1), notInService(2), notReady(3),
                               createAndWait(5), destroy(6) }
      DESCRIPTION "Support for createAndWait is required."
      
    OBJECT prvtSaaProfileRowStatus
      SYNTAX       RowStatus { active(1), notInService(2), notReady(3) }
      WRITE-SYNTAX RowStatus { active(1), notInService(2), notReady(3),
                               createAndWait(5), destroy(6) }
      DESCRIPTION "Support for createAndWait is required."

    OBJECT prvtSaaY1731LoopbackTestRowStatus
      SYNTAX       RowStatus { active(1), notInService(2), notReady(3) }
      WRITE-SYNTAX RowStatus { active(1), notInService(2), notReady(3),
                               createAndWait(5), destroy(6) }
      DESCRIPTION "Support for createAndWait is required."

    ::= { prvtSaaCompliances 1 }


--- TWAMP


--prvtTwampNotifications OBJECT IDENTIFIER ::= { prvtTwampMIB 0 }
prvtTwampObjects OBJECT IDENTIFIER ::= { prvtSaaObjects 4 }
--
--
--
prvtTwampTest OBJECT IDENTIFIER ::= { prvtTwampObjects 1 }
prvtTwampServer OBJECT IDENTIFIER ::= { prvtTwampObjects 2 }
prvtTwampTestResult OBJECT IDENTIFIER ::= { prvtTwampObjects 3 }
--
--
--
PrvtTwampTestNameType ::= TEXTUAL-CONVENTION
DISPLAY-HINT "32a"
STATUS current
DESCRIPTION "TWAMP test name type (1..32 characters)."
SYNTAX OCTET STRING (SIZE(1..32))



PrvtTwampDecimalPercent ::= TEXTUAL-CONVENTION
    DISPLAY-HINT "3d.2d"
    STATUS      current
    DESCRIPTION 
        "A percentage value in decimal format."
    SYNTAX OCTET STRING (SIZE(1..10))
--
--
--


prvtTwampTestTable OBJECT-TYPE
	SYNTAX SEQUENCE OF PrvtTwampTestEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
	"Table contains TWAMP tests."
		::= { prvtTwampTest 1 }
		
prvtTwampTestEntry OBJECT-TYPE
    SYNTAX      PrvtTwampTestEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "Entry in prvtTwampTestTable"
    INDEX  {prvtTwampTestName }
    ::= { prvtTwampTestTable 1 }       


PrvtTwampTestEntry ::= SEQUENCE {
	prvtTwampTestName PrvtTwampTestNameType,
	prvtTwampTestRowStatus RowStatus,
	prvtTwampTestServer IpAddress,
	prvtTwampTestSessionsCount Integer32,
	prvtTwampTestPackets Integer32,
	prvtTwampTestTimeout Integer32,
	prvtTwampTestDelay Integer32,
	prvtTwampTestExecuteNow Integer32
}


   prvtTwampTestName OBJECT-TYPE
       SYNTAX      PrvtTwampTestNameType
       MAX-ACCESS  not-accessible
       STATUS      current
       DESCRIPTION
               "TWAMP test name."
           ::= { prvtTwampTestEntry 1 }
           
           
   prvtTwampTestRowStatus OBJECT-TYPE
       SYNTAX      RowStatus
       MAX-ACCESS  read-create
       STATUS      current
       DESCRIPTION
               "Create/delete entry in prvtTwampTestTable."
           ::= { prvtTwampTestEntry 2 }
 
   prvtTwampTestServer OBJECT-TYPE
       SYNTAX      IpAddress
       MAX-ACCESS  read-create
       STATUS      current
       DESCRIPTION
               "TWAMP test server ip-address."
           ::= { prvtTwampTestEntry 3 }     
           
	prvtTwampTestSessionsCount OBJECT-TYPE
       SYNTAX      Integer32 (1..10)
       MAX-ACCESS  read-create
       STATUS      current
       DESCRIPTION
               "The number of parallel test sessions."
       DEFVAL  { 1 }
           ::= { prvtTwampTestEntry 4 }

   prvtTwampTestPackets OBJECT-TYPE
       SYNTAX      Integer32 (10..1000)
       MAX-ACCESS  read-create
       STATUS      current
       DESCRIPTION
               "The number of packets in parallel sessions."
       DEFVAL  { 300 }
           ::= { prvtTwampTestEntry 5 }

   prvtTwampTestTimeout OBJECT-TYPE
       SYNTAX      Integer32 (100..10000)
       MAX-ACCESS  read-create
       STATUS      current
       DESCRIPTION
               "The timout interval of test packets (in milliseconds)."
       DEFVAL  { 900 }
           ::= { prvtTwampTestEntry 6 }
           
           
   prvtTwampTestDelay OBJECT-TYPE
       SYNTAX      Integer32 (100..1500)
       MAX-ACCESS  read-create
       STATUS      current
       DESCRIPTION
               "The delay interval between test packets (in milliseconds)"
       DEFVAL  { 100 }
           ::= { prvtTwampTestEntry 7 }     
           
           
prvtTwampTestExecuteNow OBJECT-TYPE
SYNTAX Integer32 (0..2)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When this object is set to '1', command
self-test execute-now.  When this object is set to '2' 
the self-test is stopped. Setting the variable to '0'
results in an 'inconsistentValue' error.
Setting it to any other value has no effect.

When this object is read, the value '0' is returned."
::= { prvtTwampTestEntry 8 }



prvtTwampClientTable OBJECT-TYPE
	SYNTAX SEQUENCE OF PrvtTwampClientEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
	"Table contains the allowed clients for the TWAMP server."
		::= { prvtTwampServer 6 }
        
prvtTwampClientEntry OBJECT-TYPE
	SYNTAX PrvtTwampClientEntry
	MAX-ACCESS  not-accessible
	STATUS current
	DESCRIPTION "Entry in twampClientTable." 
	INDEX {prvtTwampClientIp}
		::= { prvtTwampClientTable 1 }
              
PrvtTwampClientEntry ::= SEQUENCE {
	prvtTwampClientIp IpAddress,
	prvtTwampClientRowStatus RowStatus
	}
	
	
prvtTwampClientIp OBJECT-TYPE
       SYNTAX      IpAddress
       MAX-ACCESS  not-accessible
       STATUS      current
       DESCRIPTION
               "The ip-address of the client."
           ::= { prvtTwampClientEntry 1 }
           
prvtTwampClientRowStatus OBJECT-TYPE
       SYNTAX      RowStatus
       MAX-ACCESS  read-create
       STATUS      current
       DESCRIPTION
               "create/delete entry in prvtTwampClientTable"
           ::= { prvtTwampClientEntry 2 }
	

   prvtTwampServerInnactivity OBJECT-TYPE
       SYNTAX      Integer32 (1..900)
       MAX-ACCESS  read-write
       STATUS      current
       DESCRIPTION
               "The server innactivity timeout interval of the TWAMP server (in seconds)."
       DEFVAL  { 900 }
           ::= { prvtTwampServer 1 }
           
   prvtTwampServerSessionInnactivity OBJECT-TYPE
       SYNTAX      Integer32 (1..900)
       MAX-ACCESS  read-write
       STATUS      current
       DESCRIPTION
               "The session innactivity timeout interval of the TWAMP server (in seconds)."
       DEFVAL  { 900 }
           ::= { prvtTwampServer 2 }
           
   prvtTwampServerMaxSessions OBJECT-TYPE
       SYNTAX      Integer32 (1..1000)
       MAX-ACCESS  read-write
       STATUS      current
       DESCRIPTION
               "The maximum number of controll sessions supported by the TWAMP server."
       DEFVAL  { 10 }
           ::= { prvtTwampServer 3 }
           
   prvtTwampServerMaxParallelSessions OBJECT-TYPE
       SYNTAX      Integer32 (1..10)
       MAX-ACCESS  read-write
       STATUS      current
       DESCRIPTION
               "The maximum number of parallel test sessions for each client supperted by the TWAMP server."
       DEFVAL  { 1 }
           ::= { prvtTwampServer 4 }

   prvtTwampServerShutdown OBJECT-TYPE
       SYNTAX      TruthValue
       MAX-ACCESS  read-write
       STATUS      current
       DESCRIPTION
               "The administrative state of the TWAMP server."
       DEFVAL  { 2 }
           ::= { prvtTwampServer 5 }
           
   prvtTwampServerControlSessions OBJECT-TYPE
       SYNTAX      Integer32
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION
               "The number of current control sessions established on the TWAMP server."
           ::= { prvtTwampServer 7 }
           
   prvtTwampServerTestSessions OBJECT-TYPE
       SYNTAX      Integer32
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION
               "The number of current test sessions established on the TWAMP server."
           ::= { prvtTwampServer 8 }
		

prvtTwampTestResultTable OBJECT-TYPE
	SYNTAX SEQUENCE OF PrvtTwampTestResultEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
	"Table contains statistics of the executed TWAMP tests."
		::= { prvtTwampTestResult 1 }

prvtTwampTestResultEntry OBJECT-TYPE
	SYNTAX PrvtTwampTestResultEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION "Entry in twampTestResultTable"
	INDEX {prvtTwampTestId}
		::= { prvtTwampTestResultTable 1 }

PrvtTwampTestResultEntry ::= SEQUENCE {
	prvtTwampTestId Unsigned32,
	prvtTwampTestResultName PrvtTwampTestNameType,
	prvtTwampTestStartTime Unsigned32,
	prvtTwampTestServerAddress IpAddress,
	prvtTwampTestSessions Unsigned32,
	prvtTwampTestState INTEGER,
	prvtTwampTestRtt Counter64,
	prvtTwampTestMinRtt Counter64,
	prvtTwampTestMaxRtt Counter64,
	prvtTwampTestPcktSent Unsigned32,
	prvtTwampTestPcktLost Unsigned32,
	prvtTwampTestPcktDrop Unsigned32,
	prvtTwampTestVariation Counter64,
	prvtTwampTestVariationLow PrvtTwampDecimalPercent,
	prvtTwampTestVariationMiddle PrvtTwampDecimalPercent,
	prvtTwampTestVariationHigh PrvtTwampDecimalPercent   
}


  prvtTwampTestId OBJECT-TYPE
       SYNTAX      Unsigned32
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION
               "The internal ID of the TWAMP test instance."
           ::= { prvtTwampTestResultEntry 1 }

   prvtTwampTestResultName OBJECT-TYPE
       SYNTAX      PrvtTwampTestNameType
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION
               "TWAMP test name."
           ::= { prvtTwampTestResultEntry 2 }

   prvtTwampTestStartTime OBJECT-TYPE
       SYNTAX      Unsigned32
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION
               "The start time of the TWAMP test instance."
           ::= { prvtTwampTestResultEntry 3 }
           
   prvtTwampTestServerAddress OBJECT-TYPE
       SYNTAX      IpAddress
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION
               "The server ip-address of the TWAMP test instance."
           ::= { prvtTwampTestResultEntry 4 }
           
   prvtTwampTestSessions OBJECT-TYPE
       SYNTAX      Unsigned32
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION
               "The number of parallel test sessions of the TWAMP test instance."
       DEFVAL  { 0 }
           ::= { prvtTwampTestResultEntry 5 }
           
           
   prvtTwampTestState OBJECT-TYPE
       SYNTAX      INTEGER  { 
									failed ( 1 ),
									running ( 2 ),
									stopped ( 3 ),
									finished ( 4 )
		}
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION
               "The status of the executed TWAMP test instance."
       DEFVAL  { 2 }
           ::= { prvtTwampTestResultEntry 6 }
           
   prvtTwampTestRtt OBJECT-TYPE
       SYNTAX      Counter64
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION
               "The average round-trip time of the TWAMP test sample."
       DEFVAL  { 0 }
           ::= { prvtTwampTestResultEntry 7 }
           
           
   prvtTwampTestMinRtt OBJECT-TYPE
       SYNTAX      Counter64
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION
               "The minimum round-trip time of the TWAMP test sample."
       DEFVAL  { 0 }
           ::= { prvtTwampTestResultEntry 8 }
           
   prvtTwampTestMaxRtt OBJECT-TYPE
       SYNTAX      Counter64
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION
               "The maximum round-trip time of the TWAMP test sample."
       DEFVAL  { 0 }
           ::= { prvtTwampTestResultEntry 9 }
           
           
   prvtTwampTestPcktSent OBJECT-TYPE
       SYNTAX      Unsigned32
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION
               "The number of test packets sent for the TWAMP test instance."
       DEFVAL  { 0 }
           ::= { prvtTwampTestResultEntry 10 }
           
    prvtTwampTestPcktLost OBJECT-TYPE
       SYNTAX      Unsigned32
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION
               "The number of lost test packets."
       DEFVAL  { 0 }
           ::= { prvtTwampTestResultEntry 11 }
           
           
    prvtTwampTestPcktDrop OBJECT-TYPE
       SYNTAX      Unsigned32
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION
               "The number of dropped test packets."
       DEFVAL  { 0 }
           ::= { prvtTwampTestResultEntry 12 }
           
           
    prvtTwampTestVariation OBJECT-TYPE
       SYNTAX      Counter64
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION
               "The maximum module variation of the TWAMP test sample"
       DEFVAL  { 0 }
           ::= { prvtTwampTestResultEntry 13 }
           
           
 	prvtTwampTestVariationLow OBJECT-TYPE
       SYNTAX      PrvtTwampDecimalPercent
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION
               "The percent of singletons whose variation is less than 10% of the negated maximum module variation of the sample."
           ::= { prvtTwampTestResultEntry 14 }
           
 	prvtTwampTestVariationMiddle OBJECT-TYPE
       SYNTAX      PrvtTwampDecimalPercent
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION
                "The percent of singletons whose variation by module is less than 10% of the maximum module variation of the sample."
           ::= { prvtTwampTestResultEntry 15 }
           
 	prvtTwampTestVariationHigh OBJECT-TYPE
       SYNTAX      PrvtTwampDecimalPercent
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION
                "The percent of singletons whose variation is greater than 10% of the maximum module variation of the sample."
           ::= { prvtTwampTestResultEntry 16 }                        


--- TWAMP end



END