mibs/MIBS/telco-systems/binos/PRVT-Y1564-MIB

782 lines
22 KiB
Plaintext
Raw Permalink Normal View History

2023-12-05 12:25:34 +01:00
-- *********************************************************************
-- *********************************************************************
-- ** Filename: PRVT-SWITCH-Y1564-MIB
-- ** Project: T - Ethernet and Fast Ethernet IP Switches.
-- ** Purpose: Private MIB
-- *********************************************************************
-- (c) Copyright, 2001, BATM Advanced Communications. All rights reserved.
-- WARNING:
--
-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
--
-- This file is the property of BATM Advanced Communications.
-- BATM Advanced Communications retains all title and
-- ownership in the Specification, including any revisions.
-- BATM Advanced Communications grants all interested parties a non-exclusive
-- license to use and distribute an unmodified copy of this
-- Specification in connection with management of BATM Advanced Communications
-- and Telco Systems<6D>products, and without fee, provided that the following
-- conditions are met:
-- 1. Redistributions of this specification must retain the above copyright
-- notice, this list of conditions and the following disclaimer.
-- 2. Redistributions in binary form must reproduce the above copyright
-- notice, this list of conditions and the following disclaimer in the
-- documentation and/or other materials provided with the distribution.
-- 3. The name of the BATM Advanced Communications MAY NOT be used to endorse
-- or promote products derived from this specification without specific prior written
-- permission.
--
-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
-- WARRANTY, THE SPECIFICATIONS CONTAINED IN THIS FILE ARE
-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
-- INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
-- TO USE, THE SPECIFICATION CONTAINED IN THIS FILE.
PRVT-Y1564-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, Counter32, NOTIFICATION-TYPE
FROM SNMPv2-SMI -- [RFC2578]
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
FROM SNMPv2-CONF -- [RFC2580]
RowStatus, TruthValue, DisplayString
FROM SNMPv2-TC -- [RFC2579]
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB -- [RFC2571]
switch
FROM PRVT-SWITCH-MIB;
prvtY1564Mib MODULE-IDENTITY
LAST-UPDATED "201202270000Z"
ORGANIZATION "BATM Advanced Communication"
CONTACT-INFO
"BATM/Telco Systems Support team
Email:
For North America: techsupport@telco.com
For North Europe: support@batm.de, info@batm.de
For the rest of the world: techsupport@telco.com"
DESCRIPTION
"This MIB provides the extended capability of controlling and
provisioning for Y1564 test.
It adds extra functionality for DISMAN-PING-MIB"
-- revision history
REVISION "201202270000Z"
DESCRIPTION
"Initial version."
::= { switch 129 }
-- ***********************************************
-- ************ Top level structure of the MIB****
-- ***********************************************
prvtY1564Notifications OBJECT IDENTIFIER ::= { prvtY1564Mib 0 }
prvtY1564Objects OBJECT IDENTIFIER ::= { prvtY1564Mib 1 }
prvtY1564Conformance OBJECT IDENTIFIER ::= { prvtY1564Mib 2 }
prvtY1564Test OBJECT IDENTIFIER ::= { prvtY1564Objects 1 }
prvtY1564TestResult OBJECT IDENTIFIER ::= { prvtY1564Objects 2 }
prvtY1564Profiles OBJECT IDENTIFIER ::= { prvtY1564Objects 3 }
-- ***********************************************
-- ************* global scalar objects ***********
-- ***********************************************
prvtY1564TestTable OBJECT-TYPE
SYNTAX SEQUENCE OF PrvtY1564TestEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table holds the configuration for a Y1564 test"
::= { prvtY1564Test 1 }
prvtY1564TestEntry OBJECT-TYPE
SYNTAX PrvtY1564TestEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"NONE"
INDEX {
prvtY1564TestName
}
::= { prvtY1564TestTable 1 }
PrvtY1564TestEntry ::= SEQUENCE {
prvtY1564TestName SnmpAdminString,
prvtY1564TestType INTEGER,
prvtY1564TestMode INTEGER,
prvtY1564TestExecStatus INTEGER,
prvtY1564TestSourceType INTEGER,
prvtY1564TestSource OCTET STRING,
prvtY1564TestTargetType INTEGER,
prvtY1564TestTarget OCTET STRING,
prvtY1564TestTimeout Unsigned32,
prvtY1564TestCIR Unsigned32,
prvtY1564TestEIR Unsigned32,
prvtY1564TestConfigurationTestTrafficPolicing TruthValue,
prvtY1564TestConfigurationTestCirSteps Unsigned32,
prvtY1564TestConfigurationStepDuration Unsigned32,
prvtY1564TestPerformanceTestDuration INTEGER,
prvtY1564TestCVLAN Unsigned32,
prvtY1564TestCVLANPriority Unsigned32,
prvtY1564TestCVLANDropEligible TruthValue,
prvtY1564TestSVLAN Unsigned32,
prvtY1564TestSVLANPriority Unsigned32,
prvtY1564TestSVLANDropEligible TruthValue,
prvtY1564TestPDUSize INTEGER,
prvtY1564TestLoopbackType INTEGER,
prvtY1564TestPaternType INTEGER,
prvtY1564TestProfileName OCTET STRING,
prvtY1564TestRowStatus RowStatus
}
prvtY1564TestName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This string is used to describe the test name for the
Y1564 test. It is also used as a test identifier."
::= { prvtY1564TestEntry 1 }
prvtY1564TestType OBJECT-TYPE
SYNTAX INTEGER
{
testHead ( 1 ),
testLoopback( 2 )
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Y1564 test type"
::= { prvtY1564TestEntry 2 }
prvtY1564TestMode OBJECT-TYPE
SYNTAX INTEGER {
configurationTest ( 1 ),
performanceTest ( 2 ),
both ( 3 )
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specify test mode"
::= { prvtY1564TestEntry 3 }
prvtY1564TestExecStatus OBJECT-TYPE
SYNTAX INTEGER
{
notRunning ( 1 ),
running ( 2 )
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Y1564 test execution status."
DEFVAL { notRunning }
::= { prvtY1564TestEntry 4 }
prvtY1564TestSourceType OBJECT-TYPE
SYNTAX INTEGER
{
none( 0 ),
mac ( 1 ),
mep ( 2 )
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Y1564 test source type."
::= { prvtY1564TestEntry 5}
prvtY1564TestSource OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..17))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"String that holds either the MAC or the MEP ID.
MAC should be in the format AA:BB:CC:DD:EE:FF
MEP shold be in the format DOMAIN:MA:MEP that represent
the values corresponding to dot1agCfmMdIndex,
dot1agCfmMaIndex and dot1agCfmMepIdentifier from
IEEE8021-CFM-MIB.
e.g.:
MAC: 00:A0:12:5C:12:C0
MEP: 1:1:2"
::= { prvtY1564TestEntry 6 }
prvtY1564TestTargetType OBJECT-TYPE
SYNTAX INTEGER
{
none( 0 ),
mac ( 1 ),
mep ( 2 )
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Y1564 test target type."
::= { prvtY1564TestEntry 7 }
prvtY1564TestTarget OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..17))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"String that holds either the MAC or the MEP ID.
MAC should be in the format AA:BB:CC:DD:EE:FF
MEP shold be in the format DOMAIN:MA:MEP that represent
the values corresponding to dot1agCfmMdIndex,
dot1agCfmMaIndex and dot1agCfmMepIdentifier from
IEEE8021-CFM-MIB.
e.g.:
MAC: 00:A0:12:5C:12:C0
MEP: 1:1:2"
::= { prvtY1564TestEntry 8 }
prvtY1564TestTimeout OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Y1564 test timeout in 0.1 of a second increments."
DEFVAL { 1 }
::= { prvtY1564TestEntry 9 }
prvtY1564TestCIR OBJECT-TYPE
SYNTAX Unsigned32 (64..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Y1564 Committed Information Rate (CIR) value."
::= { prvtY1564TestEntry 10 }
prvtY1564TestEIR OBJECT-TYPE
SYNTAX Unsigned32 (0..1000000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specify Excess Information Rate"
::= { prvtY1564TestEntry 11 }
prvtY1564TestConfigurationTestTrafficPolicing OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specify Traffic Policing "
::= { prvtY1564TestEntry 12 }
prvtY1564TestConfigurationTestCirSteps OBJECT-TYPE
SYNTAX Unsigned32 (1..10)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specify the number of Comitted Information Rate Steps"
::= { prvtY1564TestEntry 13 }
prvtY1564TestConfigurationStepDuration OBJECT-TYPE
SYNTAX Unsigned32 (1..60)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specify the configuration step duration, in seconds. This duration is used for every CIR step test and
also for EIR test and Policing test."
::= { prvtY1564TestEntry 14 }
prvtY1564TestPerformanceTestDuration OBJECT-TYPE
SYNTAX INTEGER {
testDuration15min (15),
testDuration30min (30)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specify the performane test duration, in minutes"
::= { prvtY1564TestEntry 15}
prvtY1564TestCVLAN OBJECT-TYPE
SYNTAX Unsigned32 (0..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"C-VLAN ID for the Y1564 test."
::= { prvtY1564TestEntry 16 }
prvtY1564TestCVLANPriority OBJECT-TYPE
SYNTAX Unsigned32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"VPT for C-VLAN0 for the Y1564 test."
::= { prvtY1564TestEntry 17 }
prvtY1564TestCVLANDropEligible OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Drop Eligible flag for C-VLAN for the Y1564 test."
::= { prvtY1564TestEntry 18 }
prvtY1564TestSVLAN OBJECT-TYPE
SYNTAX Unsigned32 (0..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"S-VLAN ID for the Y1564 test."
::= { prvtY1564TestEntry 19 }
prvtY1564TestSVLANPriority OBJECT-TYPE
SYNTAX Unsigned32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"VPT for S-VLAN0 for the Y1564 test."
::= { prvtY1564TestEntry 20 }
prvtY1564TestSVLANDropEligible OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Drop Eligible flag for S-VLAN for the Y1564 test."
::= { prvtY1564TestEntry 21 }
prvtY1564TestPDUSize OBJECT-TYPE
SYNTAX INTEGER
{
value64 ( 64 ),
value128 ( 128 ),
value256 ( 256 ),
value512 ( 512),
value1024 ( 1024 ),
value1280 ( 1280 ),
value1518 ( 1518 ),
value2000 ( 2000 ),
value9000 ( 9000)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Packet sizes for Y1564 test:
64,128,256,512,1024,1280,1518,2000,9000"
::= { prvtY1564TestEntry 22 }
prvtY1564TestLoopbackType OBJECT-TYPE
SYNTAX INTEGER
{
macSwap ( 1 ),
oam ( 2 )
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Y1564 test loopback type."
::= { prvtY1564TestEntry 23 }
prvtY1564TestPaternType OBJECT-TYPE
SYNTAX INTEGER
{
null ( 1 ),
nullCRC ( 2 ),
prbs ( 3 ),
prbsCRC ( 4 ),
none ( 8 )
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Y1564 test patern type.
Options for it are none, null, null-crc, prbs, prbs-crc."
::= { prvtY1564TestEntry 24 }
prvtY1564TestProfileName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Name assigned to the Y1564 profile."
DEFVAL { '00'H }
::= { prvtY1564TestEntry 25 }
prvtY1564TestRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of the row entry.
The writable columns in a row can not be changed if the row
is active. Certain columns must have a valid value before a row
can be activated."
::= { prvtY1564TestEntry 26 }
-- ***********************************************
-- ************* TEST RESULT *************
-- ***********************************************
prvtY1564TestResultTable OBJECT-TYPE
SYNTAX SEQUENCE OF PrvtY1564TestResultEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains Y1564 results for tests."
::= { prvtY1564TestResult 1 }
prvtY1564TestResultEntry OBJECT-TYPE
SYNTAX PrvtY1564TestResultEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "NONE"
INDEX {
prvtY1564TestName,
prvtY1564TestResultIndex }
::= { prvtY1564TestResultTable 1 }
PrvtY1564TestResultEntry ::= SEQUENCE {
prvtY1564TestResultIndex Unsigned32,
prvtY1564TestResultSentInformationRate Unsigned32,
prvtY1564TestResultPacketSize Unsigned32,
prvtY1564TestResultMode INTEGER,
prvtY1564TestResultFrameLoss Unsigned32,
prvtY1564TestResultInformationRate Unsigned32,
prvtY1564TestResultFrameTransferDelay Unsigned32,
prvtY1564TestResutFrameDelayVariation Unsigned32,
prvtY1564TestResultStatus INTEGER
}
prvtY1564TestResultIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Y1564 test results table index.
Index will take values 1 to 13, each value representing a percentage
of the CIR or EIR.1-10 step of CIR , EIR+CIR, EIR+CIR+25%EIR + Peformance test CIR
The leaf prvtY1564TestResultFrameSize will present this value
in a more user-friendly way."
::= { prvtY1564TestResultEntry 1 }
prvtY1564TestResultSentInformationRate OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sent information rate at each test step"
::= { prvtY1564TestResultEntry 2 }
prvtY1564TestResultPacketSize OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The packet size for a Y1564 test packet"
::= { prvtY1564TestResultEntry 3 }
prvtY1564TestResultMode OBJECT-TYPE
SYNTAX INTEGER
{
notAvailable ( 1 ),
configurationCIRTest ( 2),
configurationEIRTest ( 3),
configurationPolicingTest ( 4),
performanceTest ( 5 )
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Y1564 test mode correspondig to the result"
::= { prvtY1564TestResultEntry 4 }
prvtY1564TestResultFrameLoss OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Frame loss of the Y1564 test measured in 0.001 of a percent"
::= { prvtY1564TestResultEntry 5 }
prvtY1564TestResultInformationRate OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The received information Rate of the Y1564 test measured in Kbps"
::= { prvtY1564TestResultEntry 6 }
prvtY1564TestResultFrameTransferDelay OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Frame transfer delay for Y1564 test measured in 1/100th of a microsecond.."
::= { prvtY1564TestResultEntry 7 }
prvtY1564TestResutFrameDelayVariation OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Frame delay variation for Y1564 test measured in 1/100th of a microsecond."
::= { prvtY1564TestResultEntry 8 }
prvtY1564TestResultStatus OBJECT-TYPE
SYNTAX INTEGER
{
notAvailable ( 1 ),
ready ( 2 ),
error ( 3 )
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Status of the Y1564 test"
::= { prvtY1564TestResultEntry 9 }
-- ***********************************************
-- ****************** PROFILE *******************
-- ***********************************************
prvtY1564ProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF PrvtY1564ProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table contains Y1564 thresholds."
::= { prvtY1564Profiles 1 }
prvtY1564ProfileEntry OBJECT-TYPE
SYNTAX PrvtY1564ProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "NONE"
INDEX { prvtY1564ProfileName }
::= { prvtY1564ProfileTable 1 }
PrvtY1564ProfileEntry ::= SEQUENCE {
prvtY1564ProfileName SnmpAdminString,
prvtY1564ProfileFrameLoss Unsigned32,
prvtY1564ProfileFrameTransferDelay Unsigned32,
prvtY1564ProfileFrameDelayVariation Unsigned32,
prvtY1564ProfileRowStatus RowStatus
}
prvtY1564ProfileName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This string is used to describe the test profile name for the
Y1564 test. It is also used as a profile identifier."
::= { prvtY1564ProfileEntry 1 }
prvtY1564ProfileFrameLoss OBJECT-TYPE
SYNTAX Unsigned32 (0..100000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specify maximum frameloss to declare test succeeded"
::= { prvtY1564ProfileEntry 2 }
prvtY1564ProfileFrameTransferDelay OBJECT-TYPE
SYNTAX Unsigned32 (1..60000000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specify maximum frame transfer delay in microseconds to declare test succeeded"
::= { prvtY1564ProfileEntry 3 }
prvtY1564ProfileFrameDelayVariation OBJECT-TYPE
SYNTAX Unsigned32 (1..60000000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specify maximum frame delay variation in microseconds to declare test succeeded"
::= { prvtY1564ProfileEntry 4 }
prvtY1564ProfileRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Creation/delete/edit of the Y1564 profile. "
::= { prvtY1564ProfileEntry 5 }
-- ***********************************************
-- **************** Notification *****************
-- ***********************************************
prvtY1564ProbeFailed NOTIFICATION-TYPE
OBJECTS {
prvtY1564TestType,
prvtY1564TestResultStatus
}
STATUS current
DESCRIPTION
"This trap should be sent whenever a Y1564 probe
on a specific test fails."
::= { prvtY1564Notifications 1 }
prvtY1564ProbeSuccess NOTIFICATION-TYPE
OBJECTS {
prvtY1564TestType,
prvtY1564TestResultStatus
}
STATUS current
DESCRIPTION
"This trap should be sent whenever a Y1564 probe
on a specific test finishes with success."
::= { prvtY1564Notifications 2 }
prvtY1564TestFinished NOTIFICATION-TYPE
OBJECTS {
prvtY1564TestExecStatus
}
STATUS current
DESCRIPTION
"This trap should be sent whenever a Y1564 test is finished"
::= { prvtY1564Notifications 3 }
-- ******************************************************************
-- PRVT-Y1564 MIB Module - Conformance Information
-- ******************************************************************
prvtY1564Compliances OBJECT IDENTIFIER ::= { prvtY1564Conformance 1 }
prvtY1564Groups OBJECT IDENTIFIER ::= { prvtY1564Conformance 2 }
-- ******************************************************************
-- Units of conformance
-- ******************************************************************
prvtY1564TestGroup OBJECT-GROUP
OBJECTS {
prvtY1564TestType,
prvtY1564TestMode,
prvtY1564TestExecStatus,
prvtY1564TestSourceType,
prvtY1564TestSource,
prvtY1564TestTargetType,
prvtY1564TestTarget,
prvtY1564TestTimeout,
prvtY1564TestCIR ,
prvtY1564TestEIR ,
prvtY1564TestConfigurationTestTrafficPolicing ,
prvtY1564TestConfigurationTestCirSteps ,
prvtY1564TestConfigurationStepDuration ,
prvtY1564TestPerformanceTestDuration ,
prvtY1564TestCVLAN,
prvtY1564TestCVLANPriority,
prvtY1564TestCVLANDropEligible,
prvtY1564TestSVLAN,
prvtY1564TestSVLANPriority,
prvtY1564TestSVLANDropEligible,
prvtY1564TestPDUSize,
prvtY1564TestLoopbackType,
prvtY1564TestPaternType,
prvtY1564TestProfileName,
prvtY1564TestRowStatus
}
STATUS current
DESCRIPTION
"Objects for the Y1564 test group."
::= { prvtY1564Groups 1 }
prvtY1564TestResultsGroup OBJECT-GROUP
OBJECTS {
prvtY1564TestResultSentInformationRate,
prvtY1564TestResultPacketSize,
prvtY1564TestResultMode,
prvtY1564TestResultFrameLoss,
prvtY1564TestResultInformationRate,
prvtY1564TestResultFrameTransferDelay,
prvtY1564TestResutFrameDelayVariation,
prvtY1564TestResultStatus
}
STATUS current
DESCRIPTION
"Objects for the Y1564 test results group."
::= { prvtY1564Groups 2 }
prvtY1564ProfilesGroup OBJECT-GROUP
OBJECTS {
prvtY1564ProfileFrameLoss ,
prvtY1564ProfileFrameTransferDelay ,
prvtY1564ProfileFrameDelayVariation ,
prvtY1564ProfileRowStatus
}
STATUS current
DESCRIPTION
"Objects for the Y1564 profiles group."
::= { prvtY1564Groups 3 }
prvtY1564NotificationsGroup NOTIFICATION-GROUP
NOTIFICATIONS {
prvtY1564ProbeFailed,
prvtY1564ProbeSuccess,
prvtY1564TestFinished
}
STATUS current
DESCRIPTION
"Objects for the Notifications group."
::= { prvtY1564Groups 4 }
-- ******************************************************************
-- MIB Module Compliance statements
-- ******************************************************************
prvtY1564Compliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for support of the Y1564 MIB module."
MODULE
MANDATORY-GROUPS {
prvtY1564TestGroup,
prvtY1564TestResultsGroup,
prvtY1564ProfilesGroup,
prvtY1564NotificationsGroup
}
OBJECT prvtY1564TestRowStatus
SYNTAX RowStatus { active(1), notInService(2), notReady(3) }
WRITE-SYNTAX RowStatus { active(1), notInService(2), notReady(3),
createAndWait(5), destroy(6) }
DESCRIPTION "Support for createAndWait is required."
OBJECT prvtY1564ProfileRowStatus
SYNTAX RowStatus { active(1), notInService(2), notReady(3) }
WRITE-SYNTAX RowStatus { active(1), notInService(2), notReady(3),
createAndWait(5), destroy(6) }
DESCRIPTION "Support for createAndWait is required."
::= { prvtY1564Compliances 1 }
END