mibs/MIBS/telco-systems/binox/PRVT-LMGR-MIB

374 lines
13 KiB
Plaintext
Raw Permalink Normal View History

2023-12-05 12:25:34 +01:00
-- *********************************************************************
-- **
-- ** BATM Advanced Communications.
-- **
-- *********************************************************************
-- ** Filename: PRVT-LMGR-MIB.mib
-- ** Project: T-Metro Switches.
-- ** Purpose: Private MIB
-- *********************************************************************
-- (c) Copyright, 2009, BATM Advanced Communications. All rights reserved.
-- WARNING:
--
-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
--
-- This file is the property of BATM Advanced Communications and contains
-- proprietary and confidential information. This file is made
-- available to authorized BATM customers on the express
-- condition that neither it, nor any of the information contained
-- therein, shall be disclosed to third parties or be used for any
-- purpose other than to replace, modify or upgrade firmware and/or
-- software components of BATM manufactured equipment within the
-- authorized customer's network, and that such transfer be
-- completed in accordance with the instructions provided by
-- BATM. Any other use is strictly prohibited.
--
-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
-- WARRANTY, THE SOFTWARE PROGRAMS CONTAINED IN THIS FILE ARE
-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
--
-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
-- INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
-- TO USE, THE SOFTWARE CONTAINED IN THIS FILE.
--
-- ----------------------------------------------------------------------------
PRVT-LMGR-MIB DEFINITIONS ::= BEGIN
IMPORTS
InetAddressType
FROM INET-ADDRESS-MIB
mpls
FROM PRVT-SWITCH-MIB
IpAddress, MODULE-IDENTITY, OBJECT-TYPE, Unsigned32
FROM SNMPv2-SMI
RowStatus, TEXTUAL-CONVENTION
FROM SNMPv2-TC;
prvtLmgrMIB MODULE-IDENTITY
LAST-UPDATED "200606110000Z"
ORGANIZATION
"BATM Advanced Communication"
CONTACT-INFO
"BATM/Telco Systems Support team
Email:
For North America: techsupport@telco.com
For North Europe: support@batm.de, info@batm.de
For the rest of the world: techsupport@telco.com"
DESCRIPTION
"The MIB module for management of the PRVT-LMGR
product."
REVISION "200606110000Z"
DESCRIPTION
"Initial"
::= { mpls 4 }
PrvtLmgrAdminStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The desired administrative state of a Label
Manager entity."
SYNTAX INTEGER { up(1), down(2) }
PrvtLmgrOperStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The current operational state of a Label Manager
entity. If the operational state is goingDown then
a request to activate the Label Manager entity
is rejected."
SYNTAX INTEGER { up(1), down(2), goingUp(3), goingDown(4),
actFailed(5) }
PrvtLmgrPartnerStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The state of a Label Manager partner entity."
SYNTAX INTEGER { initial(0), activating(1), active(2),
deactivating(3), failedOver(4), failed(5),
unavailable(6) }
PrvtLmgrIndex ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"The index value identifying a Label Manager
entity."
SYNTAX Unsigned32
PrvtLmgrControlModes ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The Control Mode of Label Manager."
SYNTAX INTEGER { ordered(1), independent(2) }
prvtLmgrObjects OBJECT IDENTIFIER
::= { prvtLmgrMIB 1 }
prvtLmgrLsrEntityTable OBJECT-TYPE
SYNTAX SEQUENCE OF PrvtLmgrLsrEntityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry represents an instance of the Label Manager.
Each instance is identified by LSR index."
::= { prvtLmgrObjects 2 }
prvtLmgrLsrEntityEntry OBJECT-TYPE
SYNTAX PrvtLmgrLsrEntityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry represents a Label Manager entity."
INDEX { prvtlmgrLsrEntityLsrIndex }
::= { prvtLmgrLsrEntityTable 1 }
PrvtLmgrLsrEntityEntry ::= SEQUENCE {
prvtlmgrLsrEntityLsrIndex PrvtLmgrIndex,
prvtLmgrLsrEntityRowStatus RowStatus,
prvtLmgrLsrEntityAdminStatus PrvtLmgrAdminStatus,
prvtLmgrLsrEntityOperStatus PrvtLmgrOperStatus,
prvtLmgrLsrEntityLsrId Unsigned32,
prvtLmgrLsrEntityTranAddrType InetAddressType,
prvtLmgrLsrEntityTranAddrLen Unsigned32,
prvtLmgrLsrEntityTranAddr OCTET STRING
}
prvtlmgrLsrEntityLsrIndex OBJECT-TYPE
SYNTAX PrvtLmgrIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"LSR index for this prvtLmgrLsrEntityEntry. This is the
entity index passed in the Label Manager create
parameters."
::= { prvtLmgrLsrEntityEntry 1 }
prvtLmgrLsrEntityRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Row status for the Label Manager table entry, used to
create and destroy table entries. When
prvtLmgrLsrEntityRowStatus is 'active' and
prvtLmgrLsrEntityAdminStatus is 'up' Label Manager is
active and only these two fields and
prvtLmgrLsrEntityMinLsiBuffers can be modified."
::= { prvtLmgrLsrEntityEntry 2 }
prvtLmgrLsrEntityAdminStatus OBJECT-TYPE
SYNTAX PrvtLmgrAdminStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Administrative status for Label Manager. When
prvtLmgrLsrEntityRowStatus is 'active' and
prvtLmgrLsrEntityAdminStatus is 'up' Label Manager is
active and only these two fields and
prvtLmgrLsrEntityMinLsiBuffers can be modified."
::= { prvtLmgrLsrEntityEntry 3 }
prvtLmgrLsrEntityOperStatus OBJECT-TYPE
SYNTAX PrvtLmgrOperStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current operational status of the Label Manager
entity."
::= { prvtLmgrLsrEntityEntry 4 }
prvtLmgrLsrEntityLsrId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"An ID that uniquely identifies this LSR within the
network.
The LSR ID is typically derived from one of the LSR's IP
addresses. It may be used for path vector based loop
detection if the signaling protocol in use implements
that.
A value of zero indicates that no LSR ID has been
configured. In this case, the signaling protocol stack
should construct a unique LSR ID from the other
information that is available to it (such as IP
addresses). For example, PRVT-CR-LDP and PRVT-RSVP derive
the LSR ID by taking the 32 low bits of the following
_transport_address_ field, left padding with zeros if
necessary.
The LSR ID is only used to identify this LSR on IPv4
networks. See dcLmgrLsrEntityIpv6TranAddr for equivalent
function for use in IPv6 networks."
::= { prvtLmgrLsrEntityEntry 5 }
prvtLmgrLsrEntityTranAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of the internetwork layer address used as the
transport address. Currently this must be IPv4. See
dcLmgrLsrEntityIpv6TranAddr, below, for the equivalent
field for use in IPv6 networks.
The transport address is used by LDP as the source
transport address for LDP Hello messages for the global
(per-platform) label space.
The transport address is used by RSVP as the source
address for messages originating on unnumbered interfaces.
This object indicates how the value of
mplsLdpEntityTransAddr is to be interpreted."
::= { prvtLmgrLsrEntityEntry 6 }
prvtLmgrLsrEntityTranAddrLen OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The length of the internetwork layer address used as the
transport address for LDP Hello messages in the global
label space and for messages originating on unnumbered
interfaces in RSVP. Currently this must be an IPv4
address.
This object indicates how many elements of the
mplsLdpEntityTransAddr array are valid. This value must
not exceed _LMGR_LSR_ADDR_LEN_."
::= { prvtLmgrLsrEntityEntry 7 }
prvtLmgrLsrEntityTranAddr OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(4 | 16))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the internetwork layer address used as the
transport address for LDP Hello messages in the global
label space and for messages originating on unnumbered
interfaces in RSVP.
This must be an IPv4 address. See
dcLmgrLsrEntityIpv6TranAddr, below, for the equivalent
field for use in IPv6 networks.
If the transport address is not set, then _lsr_id_ must be
set to zero. In this case, the transport address and LSR
ID are taken from an address on the Interface Information
Interface."
::= { prvtLmgrLsrEntityEntry 8 }
prvtLmgrLsrLspXcTable OBJECT-TYPE
SYNTAX SEQUENCE OF PrvtLmgrLsrLspXcEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry represents an instance of an LSP
cross-conect between a single in-segment and a
single out-segment."
::= { prvtLmgrObjects 3 }
prvtLmgrLsrLspXcEntry OBJECT-TYPE
SYNTAX PrvtLmgrLsrLspXcEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry represents an LSP cross connect."
INDEX { prvtlmgrLsrEntityLsrIndex, prvtLmgrLsrLspXcIndex,
prvtLmgrLsrLspInSegLabel, prvtLmgrLsrLspOutSegIndex }
::= { prvtLmgrLsrLspXcTable 1 }
PrvtLmgrLsrLspXcEntry ::= SEQUENCE {
prvtLmgrLsrLspXcIndex Unsigned32,
prvtLmgrLsrLspInSegIndex Unsigned32,
prvtLmgrLsrLspInSegIfIndex Unsigned32,
prvtLmgrLsrLspInSegLabel Unsigned32,
prvtLmgrLsrLspOutSegIndex Unsigned32,
prvtLmgrLsrLspOutSegIfIndex Unsigned32,
prvtLmgrLsrLspOutSegLabel Unsigned32,
prvtLmgrLsrLspOutSegNextHopAddr IpAddress
}
prvtLmgrLsrLspXcIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"XC index for this prvtLmgrLsrLspXc. This is the XC index
assigned by Label Manager for the LSP."
::= { prvtLmgrLsrLspXcEntry 2 }
prvtLmgrLsrLspInSegIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index for the in segment. This is the index assigned
by Label Manager for the in segment."
::= { prvtLmgrLsrLspXcEntry 3 }
prvtLmgrLsrLspInSegIfIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If index for the in segment. This is the If index
specified on setting up the in segment."
::= { prvtLmgrLsrLspXcEntry 4 }
prvtLmgrLsrLspInSegLabel OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Top label for the in segment. This is the Label assigned
by Label Manager Label Library for the in segment."
::= { prvtLmgrLsrLspXcEntry 5 }
prvtLmgrLsrLspOutSegIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index for the out segment. This is the index assigned
by Label Manager for the out segment."
::= { prvtLmgrLsrLspXcEntry 6 }
prvtLmgrLsrLspOutSegIfIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface Index for the out segment. This is the
interface index specified when setting up the out segment."
::= { prvtLmgrLsrLspXcEntry 7 }
prvtLmgrLsrLspOutSegLabel OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Top label for the out segment. This is the label
specified by the remote LSR for the out segment."
::= { prvtLmgrLsrLspXcEntry 8 }
prvtLmgrLsrLspOutSegNextHopAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Next hop address for the out segment. This is the address
specified by the remote LSR for the out segment."
::= { prvtLmgrLsrLspXcEntry 9 }
END -- end of module PRVT-LMGR-MIB.