mibs/MIBS/tplink/TPLINK-DOT1Q-VLAN-MIB

240 lines
6.9 KiB
Plaintext
Raw Permalink Normal View History

2023-12-05 12:25:34 +01:00
-- ==================================================================
-- Copyright(c) 2008-2010 Shenzhen TP-LINK Technologies Co.Ltd.
--
-- Description: Lan Switch VLAN MIB
-- Reference:
-- Version: V0.1
-- History: Create by weishuifeng, 2102.11.28
-- ==================================================================
TPLINK-DOT1Q-VLAN-MIB DEFINITIONS ::= BEGIN
IMPORTS
ifIndex
FROM RFC1213-MIB
MODULE-IDENTITY, OBJECT-TYPE, Counter32, Integer32, OBJECT-IDENTITY, NOTIFICATION-TYPE
FROM SNMPv2-SMI
TPRowStatus
FROM TPLINK-TC-MIB
DisplayString
FROM SNMPv2-TC
tplinkMgmt
FROM TPLINK-MIB;
tplinkDot1qVlanMIB MODULE-IDENTITY
LAST-UPDATED "200812160000Z"
ORGANIZATION "Shenzhen TP-LINK Technologies Co.Ltd."
CONTACT-INFO "www.tplink.com.cn"
DESCRIPTION
"VLAN (Virtual Local Area Network) technology is developed for
the switch to divide the LAN into multiple logical LANs flexibly.
Hosts in the same VLAN can communicate with each other, regardless
of their physical locations. VLAN can enhance performance by conserving
bandwidth, and improve security by limiting traffic to specific domains."
REVISION "200908030000Z"
DESCRIPTION
"Initial version of this MIB module."
::= { tplinkMgmt 14 }
tplinkDot1qVlanMIBObjects OBJECT IDENTIFIER ::= { tplinkDot1qVlanMIB 1 }
tplinkDot1qVlanNotifications OBJECT IDENTIFIER ::= { tplinkDot1qVlanMIB 2}
vlanTableCreate NOTIFICATION-TYPE
OBJECTS {
dot1qVlanId
}
STATUS current
DESCRIPTION
""
::= { tplinkDot1qVlanNotifications 1}
vlanPortConfig OBJECT IDENTIFIER ::= {tplinkDot1qVlanMIBObjects 1}
vlanConfig OBJECT IDENTIFIER ::= {tplinkDot1qVlanMIBObjects 2}
vlanPortConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF VLANPORTCONFIGENTRY
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The switch provides three Link Types for the ports. Usually,
the ACCESS port is to connect to the terminal hosts, such as
PC and Server; the TRUNK port is to connect to the switch;
the GENERAL port can connect to the terminal hosts or the
switch also."
::= { vlanPortConfig 1 }
vlanPortConifgEntry OBJECT-TYPE
SYNTAX VLANPORTCONFIGENTRY
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry contains of the information of a port parameter."
INDEX { ifIndex }
::= { vlanPortConfigTable 1 }
VLANPORTCONFIGENTRY ::=
SEQUENCE {
vlanPortNumber
OCTET STRING,
vlanPortType
INTEGER,
vlanPortPvid
INTEGER,
vlanPortLag
DisplayString ( SIZE (0..10) )
}
vlanPortNumber OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port id."
::= { vlanPortConifgEntry 1}
vlanPortType OBJECT-TYPE
SYNTAX INTEGER{
access(0), --ACCESS
trunk(1), --TRUNK
general(2) --GENERAL
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"0.ACCESS:The ACCESS port can be added in a single VLAN,and the
egress rule of the port is UNTAG. The PVID is same as the current
VLAN ID. If the current VLAN is deleted,the PVID will be set to 1
by default.
1.TRUNK:The TRUNK port can be added in multiple VLANs, and the
egress rule of the port is TAG. The PVID can be set as the VID
number of any VLAN the port belongs to.
2.GENERAL:The GENERAL port can be added in multiple VLANs and set
various egress rules according to the different VLANs. The default
egress rule is UNTAG. The PVID can be set as the VID number of any
VLAN the port belongs to."
::= { vlanPortConifgEntry 2 }
vlanPortPvid OBJECT-TYPE
SYNTAX INTEGER(1..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enter the PVID number of the port, 1-4094"
::= { vlanPortConifgEntry 3 }
vlanPortLag OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..10))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Displays the LAG to which the port belongs."
::= { vlanPortConifgEntry 4 }
vlanPortUnknown OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { vlanPortConifgEntry 5 }
vlanConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF DOT1QVLANCONFIGENTRY
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Here you can view and modify the VLAN Table."
::= { vlanConfig 1 }
vlanConfigEntry OBJECT-TYPE
SYNTAX DOT1QVLANCONFIGENTRY
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry contains of the information of a vlan."
INDEX { dot1qVlanId }
::= { vlanConfigTable 1 }
DOT1QVLANCONFIGENTRY ::=
SEQUENCE {
dot1qVlanId
INTEGER(1..4094),
dot1qVlanDescription
OCTET STRING (SIZE (0..64)),
vlanTagPortMemberAdd
OCTET STRING,
vlanUntagPortMemberAdd
OCTET STRING,
vlanPortMemberRemove
OCTET STRING,
dot1qVlanStatus
TPRowStatus
}
dot1qVlanId OBJECT-TYPE
SYNTAX INTEGER(1..4094)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enter the ID number of VLAN,2-4094."
::= { vlanConfigEntry 1 }
dot1qVlanDescription OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..64))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Give a description to the VLAN for identification,1-16 characters"
::= { vlanConfigEntry 2 }
vlanTagPortMemberAdd OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enter the desired port to be a tag member of VLAN,The format of input
port number shoud be like '1, 3, 4-7, 11'.
tag:All packets forwarded by the port are tagged. The packets contain
VLAN information."
::= { vlanConfigEntry 3 }
vlanUntagPortMemberAdd OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enter the desired port to be a untag member of VLAN,The format of input
port number shoud be like '1, 3, 4-7, 11'.
untag:Packets forwarded by the port are untagged."
::= { vlanConfigEntry 4 }
vlanPortMemberRemove OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Remove port member of vlan,The format of input port number shoud be like
'1, 3, 4-7, 11'."
::= { vlanConfigEntry 5 }
dot1qVlanStatus OBJECT-TYPE
SYNTAX TPRowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"the following two values are states:
these values may be read or written
active(1),
the following three values are
actions: these values may be written,
but are never read
createAndGo(4),
destroy(6)"
::= { vlanConfigEntry 6 }
END