mibs/MIBS/tplink/TPLINK-IPV6ADDR-MIB

277 lines
9.6 KiB
Plaintext
Raw Permalink Normal View History

2023-12-05 12:25:34 +01:00
TPLINK-IPV6ADDR-MIB DEFINITIONS ::= BEGIN
IMPORTS
RowStatus, DisplayString
FROM SNMPv2-TC
tplinkMgmt
FROM TPLINK-MIB
OBJECT-TYPE,IpAddress
FROM SNMPv2-SMI
InetAddress, InetAddressType
FROM INET-ADDRESS-MIB;
tplinkIpv6AddrMIB MODULE-IDENTITY
LAST-UPDATED "201512130930Z"
ORGANIZATION "TPLINK"
CONTACT-INFO "www.tplink.com"
DESCRIPTION "Private MIB for IPv6 address configuration."
REVISION "201212130930Z"
DESCRIPTION
"Initial version of this MIB module."
::= { tplinkMgmt 50 }
tplinkIpv6AddrMIBObjects OBJECT IDENTIFIER ::= { tplinkIpv6AddrMIB 1 }
tplinkIpv6RoutingConfig OBJECT IDENTIFIER ::= { tplinkIpv6AddrMIB 2 }
tplinkIpv6AddrNotifications OBJECT IDENTIFIER ::= { tplinkIpv6AddrMIB 3 }
ipv6ParaConfigAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ipv6ParaConfigAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of address information is relevant to the
switch's IPv6 addresses."
::= { tplinkIpv6AddrMIBObjects 1 }
ipv6ParaConfigAddrEntry OBJECT-TYPE
SYNTAX Ipv6ParaConfigAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Define the IPv6 address information."
INDEX
{
ipv6ParaConfigIfIndex,
ipv6ParaConfigAddrType,
ipv6ParaConfigSourceType,
ipv6ParaConfigAddress
}
::= { ipv6ParaConfigAddrTable 1 }
Ipv6ParaConfigAddrEntry ::=
SEQUENCE
{
ipv6ParaConfigIfIndex INTEGER,
ipv6ParaConfigIfDescription DisplayString,
ipv6ParaConfigAddrType InetAddressType,
ipv6ParaConfigAddress InetAddress,
ipv6ParaConfigPrefixLength INTEGER(1..128),
ipv6ParaConfigSourceType INTEGER,
ipv6ParaConfigRowStatus RowStatus
}
ipv6ParaConfigIfIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IfIndex of the interface"
::= { ipv6ParaConfigAddrEntry 1 }
ipv6ParaConfigIfDescription OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The description of the interface."
::= { ipv6ParaConfigAddrEntry 2 }
ipv6ParaConfigAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address type of the switch. The value must be ipv6."
::= { ipv6ParaConfigAddrEntry 3 }
ipv6ParaConfigAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IPv6 address of the switch."
::= { ipv6ParaConfigAddrEntry 4 }
ipv6ParaConfigPrefixLength OBJECT-TYPE
SYNTAX INTEGER(1..128)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The length of the prefix (in bits) associated with
the IPv6 address of the switch."
::= { ipv6ParaConfigAddrEntry 5 }
ipv6ParaConfigSourceType OBJECT-TYPE
SYNTAX INTEGER
{
assignedIp(1),
assignedEUI64Ip(2),
assignedLinklocalIp(3),
autoIp(4),
dhcpv6(5),
negotiate(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicate the type of source of IPv6 address.
The value can be one of following:
'assignedIp':
Assigned global/site-local IPv6 address;
'assignedEUI64Ip':
Assigned global/site-local IPv6 address
by using EUI-64 interface identifier;
'assignedLinklocalIp':
Assigned link-local IPv6 address.
'autoIp':
Auto generated IPv6 address as a result
of non-linklocal anycast/unicast address
configuration;
'dhcpv6':
Assigned IPv6 address through DHCPv6
protocol;
'negotiate':
Assigned IPv6 address through negotiation;"
::= { ipv6ParaConfigAddrEntry 6 }
ipv6ParaConfigRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"the following values are states:
these values may be used as follow:
active(1),if the entry is being used.
notInService(2),destory the entry.
notReady(3),destory the entry.
createAndGo(4),not being used
createAndWait(5),creat a new entry
destroy(6),destory the entry.
When you create a new user,the default password
is admin."
::= { ipv6ParaConfigAddrEntry 7 }
ipv6ParaConfigCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ipv6ParaConfigCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of configuration information is relevant to the
switch's IPv6 addresses."
::= { tplinkIpv6AddrMIBObjects 2 }
ipv6ParaConfigCfgEntry OBJECT-TYPE
SYNTAX Ipv6ParaConfigCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Define the IPv6 address information."
INDEX
{
ipv6ParaConfigCfgIfIndex
}
::= { ipv6ParaConfigCfgTable 1 }
Ipv6ParaConfigCfgEntry ::=
SEQUENCE
{
ipv6ParaConfigCfgIfIndex INTEGER,
ipv6ParaConfigCfgIfDescription DisplayString,
ipv6ParaConfigAutoLinkLocalEnable INTEGER,
ipv6ParaConfigDhcpEnable INTEGER,
ipv6ParaConfigNegotiateEnable INTEGER,
ipv6ParaConfigIPv6Enable INTEGER
}
ipv6ParaConfigCfgIfIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IfIndex of the interface"
::= { ipv6ParaConfigCfgEntry 1 }
ipv6ParaConfigCfgIfDescription OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The description of the interface."
::= { ipv6ParaConfigCfgEntry 2 }
ipv6ParaConfigAutoLinkLocalEnable OBJECT-TYPE
SYNTAX INTEGER{
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"0. disable
1. enable
Enable/Disable IPv6 link-local address auto configuration mode."
::= { ipv6ParaConfigCfgEntry 3 }
ipv6ParaConfigDhcpEnable OBJECT-TYPE
SYNTAX INTEGER{
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"0. disable
1. enable
Enable/Disable IPv6 global address auto configuration via DHCPv6 Server."
::= { ipv6ParaConfigCfgEntry 4 }
ipv6ParaConfigNegotiateEnable OBJECT-TYPE
SYNTAX INTEGER{
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"0. disable
1. enable
Enable/Disable IPv6 global address auto configuration via RA message."
::= { ipv6ParaConfigCfgEntry 5 }
ipv6ParaConfigIPv6Enable OBJECT-TYPE
SYNTAX INTEGER{
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"0. disable
1. enable
Enable/Disable IPv6 function on the interface of switch."
::= { ipv6ParaConfigCfgEntry 6 }
ipv6GatewayConfig OBJECT IDENTIFIER ::= {tplinkIpv6AddrMIBObjects 3}
ipv6Gateway OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(46))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The gateway of the ipv6 interface. Set '0' to delete the gateway."
::= { ipv6GatewayConfig 1 }
tpIpv6Routing OBJECT-TYPE
SYNTAX INTEGER{
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"0. disable
1. enable"
::= { tplinkIpv6RoutingConfig 1 }
END