594 lines
23 KiB
Plaintext
594 lines
23 KiB
Plaintext
|
TPLINK-POWER-OVER-ETHERNET-MIB DEFINITIONS ::= BEGIN
|
||
|
|
|
||
|
|
IMPORTS
|
||
|
|
MODULE-IDENTITY, OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE
|
||
|
|
FROM SNMPv2-SMI
|
||
|
|
TPRowStatus
|
||
|
|
FROM TPLINK-TC-MIB
|
||
|
|
tplinkMgmt
|
||
|
|
FROM TPLINK-MIB;
|
||
|
|
|
||
|
|
tplinkPowerOverEthernetMIB MODULE-IDENTITY
|
||
|
|
LAST-UPDATED "201307030000Z"
|
||
|
|
ORGANIZATION "TP-LINK"
|
||
|
|
CONTACT-INFO " www.tplink.com"
|
||
|
|
DESCRIPTION "Private MIB for PoE module."
|
||
|
|
REVISION "201307030000Z"
|
||
|
|
DESCRIPTION "Initial version of this MIB module."
|
||
|
|
::= { tplinkMgmt 56 }
|
||
|
|
|
||
|
|
-- (Top) SubNodes
|
||
|
|
tplinkPoeMIBObjects OBJECT IDENTIFIER ::= {tplinkPowerOverEthernetMIB 1}
|
||
|
|
tplinkPoeNotifications OBJECT IDENTIFIER ::= {tplinkPowerOverEthernetMIB 2}
|
||
|
|
|
||
|
|
-------------- tplinkPoeMIBObjects Overview------------
|
||
|
|
tpPoeConfig OBJECT IDENTIFIER ::= {tplinkPoeMIBObjects 1}
|
||
|
|
tpPoeProfile OBJECT IDENTIFIER ::= {tplinkPoeMIBObjects 2}
|
||
|
|
tpPoeRecovery OBJECT IDENTIFIER ::= {tplinkPoeMIBObjects 3}
|
||
|
|
tpPoeExtend OBJECT IDENTIFIER ::= {tplinkPoeMIBObjects 4}
|
||
|
|
|
||
|
|
-- (1) tpPoeConfig Objects
|
||
|
|
tpPoeGlobal OBJECT IDENTIFIER ::= {tpPoeConfig 1}
|
||
|
|
tpPoePort OBJECT IDENTIFIER ::= {tpPoeConfig 2}
|
||
|
|
|
||
|
|
tpSystemPowerLimit OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER(1..3200)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Define max power the PoE switch supply. The unit is 0.1W."
|
||
|
|
::= { tpPoeGlobal 1 }
|
||
|
|
|
||
|
|
tpPowerDisconnectMethod OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
{
|
||
|
|
deny-lower-priority(1)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The PoE Switch use this method to offset the power
|
||
|
|
limit being exceeded and keep the switch system using
|
||
|
|
power at a usable level."
|
||
|
|
::= { tpPoeGlobal 2 }
|
||
|
|
|
||
|
|
tpSystemPowerConsumption OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER(1..3200)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Display the PoE switch's real time system power consumption. The unit is 0.1W."
|
||
|
|
::= { tpPoeGlobal 3 }
|
||
|
|
|
||
|
|
tpSystemPowerRemain OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER(1..3200)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Display the PoE switch's real time remaining system power. The unit is 0.1W."
|
||
|
|
::= { tpPoeGlobal 4 }
|
||
|
|
|
||
|
|
tpPoePortConfigTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF POEPORTCONFIGENTRY
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A list of PoE entries.
|
||
|
|
Here you can configure the PoE feature on each port."
|
||
|
|
::= { tpPoePort 1 }
|
||
|
|
|
||
|
|
tpPoePortConfigEntry OBJECT-TYPE
|
||
|
|
SYNTAX POEPORTCONFIGENTRY
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An entry contains of the configuration and information of poe port."
|
||
|
|
INDEX { tpPoePortIndex }
|
||
|
|
::= { tpPoePortConfigTable 1 }
|
||
|
|
|
||
|
|
POEPORTCONFIGENTRY ::=
|
||
|
|
SEQUENCE {
|
||
|
|
|
||
|
|
tpPoePortIndex
|
||
|
|
INTEGER,
|
||
|
|
tpPoePortStatus
|
||
|
|
INTEGER,
|
||
|
|
tpPoePriority
|
||
|
|
INTEGER,
|
||
|
|
tpPoePowerLimit
|
||
|
|
INTEGER,
|
||
|
|
tpPoePortTimeRangeName
|
||
|
|
OCTET STRING (SIZE (0..255)),
|
||
|
|
tpPoePortProfileName
|
||
|
|
OCTET STRING (SIZE (0..255)),
|
||
|
|
tpPoePower
|
||
|
|
INTEGER,
|
||
|
|
tpPoeCurrent
|
||
|
|
INTEGER,
|
||
|
|
tpPoeVoltage
|
||
|
|
INTEGER,
|
||
|
|
tpPoeClass
|
||
|
|
INTEGER,
|
||
|
|
tpPoePowerStatus
|
||
|
|
INTEGER
|
||
|
|
}
|
||
|
|
tpPoePortIndex OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The port number of the Switch."
|
||
|
|
::= { tpPoePortConfigEntry 1 }
|
||
|
|
|
||
|
|
tpPoePortStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER{
|
||
|
|
disable(0),
|
||
|
|
enable(1)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Select to disable/enable the PoE feature
|
||
|
|
for the corresponding port. If set enable,
|
||
|
|
the corresponding port can supply power to
|
||
|
|
the linked PD (Powered Device)."
|
||
|
|
::= { tpPoePortConfigEntry 2 }
|
||
|
|
|
||
|
|
tpPoePriority OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER{
|
||
|
|
high(0),
|
||
|
|
middle(1),
|
||
|
|
low(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Cooperates with the Power Disconnected Method
|
||
|
|
to decide the way to supply power to the new
|
||
|
|
linked PD (Powered Device) when the surplus
|
||
|
|
power is inadequate."
|
||
|
|
::= { tpPoePortConfigEntry 3 }
|
||
|
|
tpPoePowerLimit OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER(1..300)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Defines the max power the corresponding port can supply.The unit is 0.1W"
|
||
|
|
::= { tpPoePortConfigEntry 4 }
|
||
|
|
|
||
|
|
tpPoePortTimeRangeName OBJECT-TYPE
|
||
|
|
SYNTAX OCTET STRING (SIZE (0..255))
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Select time range by entering its name."
|
||
|
|
::= { tpPoePortConfigEntry 5 }
|
||
|
|
|
||
|
|
tpPoePortProfileName OBJECT-TYPE
|
||
|
|
SYNTAX OCTET STRING (SIZE (0..255))
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Select profile by entering its name. "
|
||
|
|
::= { tpPoePortConfigEntry 6 }
|
||
|
|
tpPoePower OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER(1..300)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
" Displays the port's real time power supply in 0.1W."
|
||
|
|
::= { tpPoePortConfigEntry 7 }
|
||
|
|
tpPoeCurrent OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER(1..1000)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
" Displays the port's real time current in 1mA."
|
||
|
|
::= { tpPoePortConfigEntry 8 }
|
||
|
|
tpPoeVoltage OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER(1..300)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
" Displays the port's real time voltage in 0.1V."
|
||
|
|
::= { tpPoePortConfigEntry 9 }
|
||
|
|
tpPoeClass OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
{
|
||
|
|
class0(0),
|
||
|
|
class1(1),
|
||
|
|
class2(2),
|
||
|
|
class3(3),
|
||
|
|
class4(4),
|
||
|
|
class-not-defined(7)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
" Displays the class the linked PD (Powered Device) belongs to."
|
||
|
|
::= { tpPoePortConfigEntry 10 }
|
||
|
|
tpPoePowerStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
{
|
||
|
|
off(0),
|
||
|
|
turning-on(1),
|
||
|
|
on(2),
|
||
|
|
overload(3),
|
||
|
|
short(4),
|
||
|
|
nonstandard-pd(5),
|
||
|
|
voltage-high(6),
|
||
|
|
voltage-low(7),
|
||
|
|
hardware-fault(8),
|
||
|
|
overtemperature(9)
|
||
|
|
}
|
||
|
|
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
" Displays the port's real time power status."
|
||
|
|
::= { tpPoePortConfigEntry 11 }
|
||
|
|
|
||
|
|
-- (2) tpPoeProfile Objects
|
||
|
|
tpPoeProfileTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF POEPROFILEENTRY
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A list of PoE profile entries.
|
||
|
|
Here you can define the PoE profile."
|
||
|
|
::= { tpPoeProfile 1 }
|
||
|
|
|
||
|
|
tpPoeProfileEntry OBJECT-TYPE
|
||
|
|
SYNTAX POEPROFILEENTRY
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An entry contains of the information of PoE profile."
|
||
|
|
INDEX { tpPoeProfileName }
|
||
|
|
::= { tpPoeProfileTable 1 }
|
||
|
|
|
||
|
|
|
||
|
|
POEPROFILEENTRY ::=
|
||
|
|
SEQUENCE {
|
||
|
|
tpPoeProfileIndex
|
||
|
|
INTEGER,
|
||
|
|
tpPoeProfileName
|
||
|
|
OCTET STRING (SIZE (0..255)),
|
||
|
|
tpPoeProfilePortStatus
|
||
|
|
INTEGER,
|
||
|
|
tpPoeProfilePriority
|
||
|
|
INTEGER,
|
||
|
|
tpPoeProfilePowerLimit
|
||
|
|
INTEGER,
|
||
|
|
tpPoeProfileStatus
|
||
|
|
TPRowStatus
|
||
|
|
}
|
||
|
|
tpPoeProfileIndex OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The index number of the Switch."
|
||
|
|
::= { tpPoeProfileEntry 1 }
|
||
|
|
|
||
|
|
tpPoeProfileName OBJECT-TYPE
|
||
|
|
SYNTAX OCTET STRING (SIZE (0..255))
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
" the name of PoE profile."
|
||
|
|
::= { tpPoeProfileEntry 2 }
|
||
|
|
|
||
|
|
tpPoeProfilePortStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER{
|
||
|
|
disable(0),
|
||
|
|
enable(1)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Select to disable/enable the PoE feature
|
||
|
|
for the corresponding profile. If set enable,
|
||
|
|
the port selected the profile can supply power to
|
||
|
|
the linked PD (Powered Device)."
|
||
|
|
::= { tpPoeProfileEntry 3 }
|
||
|
|
|
||
|
|
tpPoeProfilePriority OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER{
|
||
|
|
high(0),
|
||
|
|
middle(1),
|
||
|
|
low(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Cooperates with the Power Disconnected Method
|
||
|
|
to decide the way to supply power to the new
|
||
|
|
linked PD (Powered Device) when the surplus
|
||
|
|
power is inadequate."
|
||
|
|
::= { tpPoeProfileEntry 4 }
|
||
|
|
|
||
|
|
tpPoeProfilePowerLimit OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER(1..300)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Defines the max power the corresponding port can supply.The unit is 0.1W."
|
||
|
|
::= { tpPoeProfileEntry 5 }
|
||
|
|
|
||
|
|
tpPoeProfileStatus OBJECT-TYPE
|
||
|
|
SYNTAX TPRowStatus
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
""
|
||
|
|
::= { tpPoeProfileEntry 6 }
|
||
|
|
|
||
|
|
-- (3) tpPoeRecovery Objects
|
||
|
|
tpPoeRecoveryGlobal OBJECT IDENTIFIER ::= {tpPoeRecovery 1}
|
||
|
|
tpPoeRecoveryPort OBJECT IDENTIFIER ::= {tpPoeRecovery 2}
|
||
|
|
|
||
|
|
tpPoeRecoveryGlobalStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
{
|
||
|
|
disable(0),
|
||
|
|
enable(1)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Enable the PoE Auto Recovery function."
|
||
|
|
::= { tpPoeRecoveryGlobal 1 }
|
||
|
|
|
||
|
|
tpPoeRecoveryPortTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF POERECOVERYPORTENTRY
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A list of PoE Auto Recovery entries. Here you can configure the PoE Auto Recovery feature on each port."
|
||
|
|
::= { tpPoeRecoveryPort 1 }
|
||
|
|
|
||
|
|
tpPoeRecoveryPortEntry OBJECT-TYPE
|
||
|
|
SYNTAX POERECOVERYPORTENTRY
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An entry contains of the poe auto recovery configuration and information of poe port."
|
||
|
|
INDEX { tpPoePortIndex }
|
||
|
|
::= { tpPoeRecoveryPortTable 1 }
|
||
|
|
|
||
|
|
POERECOVERYPORTENTRY ::=
|
||
|
|
SEQUENCE {
|
||
|
|
|
||
|
|
tpPoeRecoveryPort
|
||
|
|
INTEGER,
|
||
|
|
tpPoeRecoveryIp
|
||
|
|
OCTET STRING (SIZE (0..255)),
|
||
|
|
tpPoeRecoveryStartup
|
||
|
|
INTEGER,
|
||
|
|
tpPoeRecoveryInterval
|
||
|
|
INTEGER,
|
||
|
|
tpPoeRecoveryRetry
|
||
|
|
INTEGER,
|
||
|
|
tpPoeRecoveryBreak
|
||
|
|
INTEGER,
|
||
|
|
tpPoeRecoveryStatus
|
||
|
|
INTEGER,
|
||
|
|
tpPoeRecoveryFailure
|
||
|
|
INTEGER,
|
||
|
|
tpPoeRecoveryRestart
|
||
|
|
INTEGER,
|
||
|
|
tpPoeRecoveryTotal
|
||
|
|
INTEGER
|
||
|
|
}
|
||
|
|
tpPoeRecoveryPort OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The port number of the Switch."
|
||
|
|
::= { tpPoeRecoveryPortEntry 1 }
|
||
|
|
|
||
|
|
tpPoeRecoveryIp OBJECT-TYPE
|
||
|
|
SYNTAX OCTET STRING (SIZE (0..255))
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Defines the ping IP address for the corresponding port. (Format: x.x.x.x)"
|
||
|
|
::= { tpPoeRecoveryPortEntry 2 }
|
||
|
|
|
||
|
|
tpPoeRecoveryStartup OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER(30..600)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Defines the startup delay for the corresponding port.(30-600 Seconds)"
|
||
|
|
::= { tpPoeRecoveryPortEntry 3 }
|
||
|
|
|
||
|
|
tpPoeRecoveryInterval OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER(10..120)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Defines the ping interval for the corresponding port. (10-120 Seconds)"
|
||
|
|
::= { tpPoeRecoveryPortEntry 4 }
|
||
|
|
|
||
|
|
tpPoeRecoveryRetry OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER(1..10)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Defines the ping failure threshold for the corresponding port. (1-10) "
|
||
|
|
::= { tpPoeRecoveryPortEntry 5 }
|
||
|
|
|
||
|
|
tpPoeRecoveryBreak OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER(3..120)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Defines the break time for the corresponding port. (3-120 Seconds)"
|
||
|
|
::= { tpPoeRecoveryPortEntry 6 }
|
||
|
|
|
||
|
|
tpPoeRecoveryStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER{
|
||
|
|
disable(0),
|
||
|
|
enable(1)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Select to disable/enable the PoE Auto Recovery feature for the corresponding port."
|
||
|
|
::= { tpPoeRecoveryPortEntry 7 }
|
||
|
|
|
||
|
|
tpPoeRecoveryFailure OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER(1..9999)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
" Displays the port's ping failures."
|
||
|
|
::= { tpPoeRecoveryPortEntry 8 }
|
||
|
|
|
||
|
|
tpPoeRecoveryRestart OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER(1..9999)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
" Displays the port's restarts."
|
||
|
|
::= { tpPoeRecoveryPortEntry 9 }
|
||
|
|
|
||
|
|
tpPoeRecoveryTotal OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER(1..9999)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
" Displays the port's total pings."
|
||
|
|
::= { tpPoeRecoveryPortEntry 10 }
|
||
|
|
|
||
|
|
---(4) tpPoeExtend Objects
|
||
|
|
tpPoeExtendPort OBJECT IDENTIFIER ::= {tpPoeExtend 1}
|
||
|
|
|
||
|
|
tpPoeExtendPortTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF POEEXTENDPORTENTRY
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A list of PoE Extend Mode entries. Here you can configure the PoE Extend Mode feature on each port."
|
||
|
|
::= { tpPoeExtendPort 1 }
|
||
|
|
|
||
|
|
tpPoeExtendPortEntry OBJECT-TYPE
|
||
|
|
SYNTAX POEEXTENDPORTENTRY
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An entry contains of the poe extend mode configuration and information of poe port."
|
||
|
|
INDEX { tpPoePortIndex }
|
||
|
|
::= { tpPoeExtendPortTable 1 }
|
||
|
|
|
||
|
|
POEEXTENDPORTENTRY ::=
|
||
|
|
SEQUENCE {
|
||
|
|
|
||
|
|
tpPoeExtendPort
|
||
|
|
INTEGER,
|
||
|
|
tpPoeExtendStatus
|
||
|
|
INTEGER
|
||
|
|
}
|
||
|
|
tpPoeExtendPort OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The port number of the Switch."
|
||
|
|
::= { tpPoeExtendPortEntry 1 }
|
||
|
|
|
||
|
|
tpPoeExtendStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER{
|
||
|
|
disable(0),
|
||
|
|
enable(1)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Select to disable/enable the PoE Extend Mode feature for the corresponding port."
|
||
|
|
::= { tpPoeExtendPortEntry 2 }
|
||
|
|
|
||
|
|
-- (5) poeNotifications Objects
|
||
|
|
tpPoePortPowerChange NOTIFICATION-TYPE
|
||
|
|
OBJECTS
|
||
|
|
{
|
||
|
|
tpPoePortIndex,
|
||
|
|
tpPoePortStatus
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A poePortPowerChange notification is sent when the status of a port power changes."
|
||
|
|
::= {tplinkPoeNotifications 1}
|
||
|
|
|
||
|
|
tpPoePortPowerOverLoading NOTIFICATION-TYPE
|
||
|
|
OBJECTS
|
||
|
|
{
|
||
|
|
tpPoePortIndex
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A poePortPowerOverLoading notification is sent when a port is over loading."
|
||
|
|
::= {tplinkPoeNotifications 2}
|
||
|
|
|
||
|
|
tpPoePortShortCircuit NOTIFICATION-TYPE
|
||
|
|
OBJECTS
|
||
|
|
{
|
||
|
|
tpPoePortIndex
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A poePortShortCircuit notification is sent when short circuit occurs on a port."
|
||
|
|
::= {tplinkPoeNotifications 3}
|
||
|
|
|
||
|
|
tpPoePortPowerOver30Watts NOTIFICATION-TYPE
|
||
|
|
OBJECTS
|
||
|
|
{
|
||
|
|
tpPoePortIndex
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A poePortPowerOver30Watts notification is sent when a port's consumption is over 30W."
|
||
|
|
::= {tplinkPoeNotifications 4}
|
||
|
|
|
||
|
|
tpPoePortPowerDeny NOTIFICATION-TYPE
|
||
|
|
OBJECTS
|
||
|
|
{
|
||
|
|
tpPoePortIndex
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A poePowerDeny notification is sent when a port's power supply is denied."
|
||
|
|
::= {tplinkPoeNotifications 5}
|
||
|
|
|
||
|
|
tpPoeThermalShutdown NOTIFICATION-TYPE
|
||
|
|
OBJECTS
|
||
|
|
{
|
||
|
|
tpPoePortIndex -- an dummpy object, for compile pass
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A poeThermalShutdown notification is sent when the power supply shutdown occurs because temperature is too high."
|
||
|
|
::= {tplinkPoeNotifications 6}
|
||
|
|
|
||
|
|
tpPoeOverMaxPowerBudget NOTIFICATION-TYPE
|
||
|
|
OBJECTS
|
||
|
|
{
|
||
|
|
tpSystemPowerLimit
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A poeOverMaxPowerBudget notification is sent when the total power is over the budget."
|
||
|
|
::= {tplinkPoeNotifications 7}
|
||
|
|
END
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|