david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
main
mibs/MIBS/transition/TN-DEV-SYS-IPMGMT-MIB

758 lines
23 KiB
Plaintext
Raw Permalink Normal View History

Initial commit
2023-12-05 12:25:34 +01:00
-- ***********************************************************************************************
-- TN-DEV-SYS-IPMGMT-MIB.smi: Transition Networks Enterprise MIB for TN device IP management feature
--
-- Copyright (c) 2012 by Transition Networks, Inc.
-- All rights reserved.
--
-- ***********************************************************************************************
--
TN-DEV-SYS-IPMGMT-MIB DEFINITIONS ::= BEGIN
IMPORTS
DisplayString, RowStatus, TruthValue
FROM SNMPv2-TC
InetAddressType, InetAddress
FROM INET-ADDRESS-MIB
MODULE-IDENTITY,
OBJECT-IDENTITY,
entPhysicalIndex FROM ENTITY-MIB
tnProducts FROM TRANSITION-SMI
IpAddressOriginTC FROM IP-MIB
InterfaceIndex FROM IF-MIB;
tnDevSysIpMgmtMIB MODULE-IDENTITY
LAST-UPDATED "201208060000Z"
ORGANIZATION "Transition Networks, Inc."
CONTACT-INFO
" Transition Networks
Technical Support
10900 Red Circle Drive
Minnetonka, MN 55343 USA
Tel: +1-800-526-9267
E-mail: techsupport@transition.com"
DESCRIPTION
"The mib provides functionalities for managing the IP DHCP, IPv6 and DNS."
REVISION "201208070000Z"
DESCRIPTION
"Initial Revision of this module"
::= { tnProducts 10 }
tnDevSysIpmgmt OBJECT IDENTIFIER ::= { tnDevSysIpMgmtMIB 1 }
tnIpMgmtTable OBJECT-TYPE
SYNTAX SEQUENCE OF TnIpMgmtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table to manage IP status for each device."
::= { tnDevSysIpmgmt 1 }
tnIpMgmtEntry OBJECT-TYPE
SYNTAX TnIpMgmtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing IP status for each device."
INDEX { entPhysicalIndex }
::= { tnIpMgmtTable 1 }
TnIpMgmtEntry ::=
SEQUENCE {
tnIpAddressMode INTEGER,
tnIpMgmtAccess INTEGER,
tnIpAddrType InetAddressType,
tnIpAddr InetAddress,
tnSubnetMask InetAddress,
tnDefaultGateway InetAddress
}
tnIpAddressMode OBJECT-TYPE
SYNTAX INTEGER
{
notApplicable(0),
dhcp(1),
static(2),
bootpc(3),
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The status of DHCP client. The value of
notApplicable(0) indicating the device don't support DHCP client,
set this value to dhcp(1) to enable DHCP client,
set this value to static(2) to enable static ip.
set this value to bootpc(3) to enable bootp client"
::= { tnIpMgmtEntry 1 }
tnIpMgmtAccess OBJECT-TYPE
SYNTAX INTEGER
{
notApplicable(0),
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "(0)IP management access is not applicable.
(1)Enable IP management access.
(2)Disable IP management access.
Use this OID to Enable/Disable IP management access for the device."
::= { tnIpMgmtEntry 2 }
tnIpAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The IP address type of the device.
For a detailed description of this type, please refer to INET-ADDRESS-MIB."
::= { tnIpMgmtEntry 3 }
tnIpAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The IP address of the device.
For a detailed description of this type, please refer to INET-ADDRESS-MIB."
::= { tnIpMgmtEntry 4 }
tnSubnetMask OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The subnet the ipAddr belongs to."
::= { tnIpMgmtEntry 5 }
tnDefaultGateway OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The default gateway for the device.
For a detailed description of this type, please refer to INET-ADDRESS-MIB."
::= { tnIpMgmtEntry 6 }
--
-- DNS Server
--
tnDnsServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF TnDnsServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of DNS server.
For a detailed description of this type, please refer to INET-ADDRESS-MIB."
::= { tnDevSysIpmgmt 2 }
tnDnsServerEntry OBJECT-TYPE
SYNTAX TnDnsServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry in the table, containing inforamtion
about a DNS server."
INDEX { entPhysicalIndex, tnDnsServerIndex }
::= { tnDnsServerTable 1 }
TnDnsServerEntry ::= SEQUENCE
{
tnDnsServerIndex Integer32,
tnDnsServerIPAddrType InetAddressType,
tnDnsServerIPAddr InetAddress,
tnDnsServerStatus RowStatus
}
tnDnsServerIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Index of DNS server table."
::= { tnDnsServerEntry 1 }
tnDnsServerIPAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The IP address type of the DNS server.
For a detailed description of this type, please refer to INET-ADDRESS-MIB."
::= { tnDnsServerEntry 2 }
tnDnsServerIPAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The IP address of the DNS server.
For a detailed description of this type, please refer to INET-ADDRESS-MIB."
::= { tnDnsServerEntry 3 }
tnDnsServerStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "For a detailed description of this object, please refer to
SNMPv2-TC MIB."
::= { tnDnsServerEntry 4 }
--
-- IP Extension table
--
tnIpextMgmtTable OBJECT-TYPE
SYNTAX SEQUENCE OF TnIpextMgmtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of IPv6 status."
::= { tnDevSysIpmgmt 3 }
tnIpextMgmtEntry OBJECT-TYPE
SYNTAX TnIpextMgmtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing IPv6 status for each device."
INDEX { entPhysicalIndex }
::= { tnIpextMgmtTable 1 }
TnIpextMgmtEntry ::=
SEQUENCE {
tnIpv6status INTEGER,
tnIpv6AddressLinklocal InetAddress,
tnIpv6Method INTEGER,
tnIpv6Addr InetAddress,
tnIpv6prefix INTEGER,
tnIpv6DupAddrDetected INTEGER,
tnIpv6GwMethod INTEGER,
tnIpv6defaultGW InetAddress
}
tnIpv6status OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "(1)enable IPv6
(2)disable IPv6
Use this OID to change the method of IP management access for the device."
::= { tnIpextMgmtEntry 1 }
tnIpv6AddressLinklocal OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Link-local IPv6 address"
::= { tnIpextMgmtEntry 2 }
tnIpv6Method OBJECT-TYPE
SYNTAX INTEGER
{
static(1),
dhcpv6(2),
stateless(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "(1)Static ip access, the default value is Static ip.
(2)dhcpv6 autoconfig.
(3)stateless autoconfig.
Use this OID to change the method of IP management access for the device."
::= { tnIpextMgmtEntry 3 }
tnIpv6Addr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Global IPv6 address"
::= { tnIpextMgmtEntry 4 }
tnIpv6prefix OBJECT-TYPE
SYNTAX INTEGER(1..128)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "IPv6 prefix value"
::= { tnIpextMgmtEntry 5 }
tnIpv6DupAddrDetected OBJECT-TYPE
SYNTAX INTEGER
{
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "(1)true: duplicate address detected
(2)false: no duplicate
Use this OID to get the status of IPv6 address for the device."
::= { tnIpextMgmtEntry 6 }
tnIpv6GwMethod OBJECT-TYPE
SYNTAX INTEGER
{
static(1),
routeDisc(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "(1)static gateway address defined by ipv6defaultGW node.
(2)route discovery.
Use this OID to change the method of gateway address for the device.
Default value is static"
::= { tnIpextMgmtEntry 7 }
tnIpv6defaultGW OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "ipv6 default gateway address"
::= { tnIpextMgmtEntry 8 }
--
-- IPv6 Dynamic routes
--
tnIpv6DynRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF TnIpv6DynRouteEntry
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This entity's IPv6 dynamic routing table."
::= { tnDevSysIpmgmt 4 }
tnIpv6DynRouteEntry OBJECT-TYPE
SYNTAX TnIpv6DynRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A particular route to a particular destination.
This table is specially for the result of route discovery
which is needed for stateless auto-configuration feature."
INDEX {
tnIpv6DynRouteIndex
}
::= { tnIpv6DynRouteTable 1 }
TnIpv6DynRouteEntry ::= SEQUENCE {
tnIpv6DynRouteIndex Gauge32,
tnIpv6DynRouteDest InetAddress,
tnIpv6DynRoutePfxLen Gauge32,
tnIpv6DynRouteNextHop InetAddress,
tnIpv6DynRouteAge Gauge32,
}
tnIpv6DynRouteIndex OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Index value that identifies this route. "
::= { tnIpv6DynRouteEntry 1 }
tnIpv6DynRouteDest OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination IP address of this route."
::= { tnIpv6DynRouteEntry 2 }
tnIpv6DynRoutePfxLen OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of leading one bits that form the
mask to be logical-ANDed with the destination address
before being compared to the value in the
tnIpv6DynRouteDest field."
::= { tnIpv6DynRouteEntry 3 }
tnIpv6DynRouteNextHop OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"On remote routes, the address of the next system en
route. For non-remote routes, a zero length string."
::= { tnIpv6DynRouteEntry 4 }
tnIpv6DynRouteAge OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of seconds since this route was last updated
or otherwise determined to be correct. Note that no
semantics of 'too old' can be implied, except through
knowledge of the routing protocol by which the route
was learned."
::= { tnIpv6DynRouteEntry 5 }
--
-- Host to IP Table
--
tnHostToIpTable OBJECT-TYPE
SYNTAX SEQUENCE OF TnHostToIpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of host name to IP mapping."
::= { tnDevSysIpmgmt 7 }
tnHostToIpEntry OBJECT-TYPE
SYNTAX TnHostToIpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry in the table, containing inforamtion
about a host name mapping to an IP address."
INDEX { tnHostToIpIndex }
::= { tnHostToIpTable 1 }
TnHostToIpEntry ::= SEQUENCE
{
tnHostToIpIndex Integer32,
tnHostIPAddrType InetAddressType,
tnHostIPAddr InetAddress,
tnHostName DisplayString,
tnAliasName DisplayString,
tnEntryStatus RowStatus
}
tnHostToIpIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Index of DNS server table."
::= { tnHostToIpEntry 1 }
tnHostIPAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The IP address type of the host.
For a detailed description of this type, please refer to INET-ADDRESS-MIB."
::= { tnHostToIpEntry 2 }
tnHostIPAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The IP address of the host."
::= { tnHostToIpEntry 3 }
tnHostName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The host name."
::= { tnHostToIpEntry 4 }
tnAliasName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The alias name of the host."
::= { tnHostToIpEntry 5 }
tnEntryStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "For a detailed description of this object, please refer to
SNMPv2-TC MIB."
::= { tnHostToIpEntry 6 }
tnIPv4MgmtTable OBJECT-TYPE
SYNTAX SEQUENCE OF TnIPv4MgmtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table to manage IP status for each device."
::= { tnDevSysIpmgmt 8 }
tnIPv4MgmtEntry OBJECT-TYPE
SYNTAX TnIPv4MgmtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing IP status for each device."
INDEX { tnIpv4Interface, tnIPv4Index }
::= { tnIPv4MgmtTable 1 }
TnIPv4MgmtEntry ::=
SEQUENCE {
tnIpv4Interface InterfaceIndex,
tnIPv4Index INTEGER,
tnIPv4ConfigMode INTEGER,
tnIPv4Origin IpAddressOriginTC,
tnIPv4AddrType InetAddressType,
tnIPv4Addr InetAddress,
tnIPv4SubnetMask InetAddress,
tnIPv4DefaultGateway InetAddress,
tnIPv4Status INTEGER
}
tnIpv4Interface OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The ifIndex for the IP interface."
::= { tnIPv4MgmtEntry 1 }
tnIPv4Index OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Index of server table."
::= { tnIPv4MgmtEntry 2 }
tnIPv4ConfigMode OBJECT-TYPE
SYNTAX INTEGER
{
dhcp(1),
static(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The status of DHCP client. The value of
set this value to dhcp(1) to enable DHCP client,
set this value to static(2) to enable static ip."
::= { tnIPv4MgmtEntry 3 }
tnIPv4Origin OBJECT-TYPE
SYNTAX IpAddressOriginTC
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The origin of the address.
For a detailed description of this type, please refer to IP-MIB.
manual(2) indicates that the address was manually configured
to a specified address, e.g., by user configuration.
dhcp(4) indicates an address that was assigned to this
system by a DHCP server.
other(1) indicates that the dhcp is processing or failed"
::= { tnIPv4MgmtEntry 4 }
tnIPv4AddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The IP address type of the device.
For a detailed description of this type, please refer to INET-ADDRESS-MIB."
::= { tnIPv4MgmtEntry 5 }
tnIPv4Addr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The IP address of the device.
For a detailed description of this type, please refer to INET-ADDRESS-MIB."
::= { tnIPv4MgmtEntry 6 }
tnIPv4SubnetMask OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The subnet the ipAddr belongs to."
::= { tnIPv4MgmtEntry 7 }
tnIPv4DefaultGateway OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The default gateway for the device.
For a detailed description of this type, please refer to INET-ADDRESS-MIB."
::= { tnIPv4MgmtEntry 8 }
tnIPv4Status OBJECT-TYPE
SYNTAX INTEGER
{
active(1),
disabled(2),
renew(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "'Renew' restarts ipv4 interfaces the status changes to active/disable
depending on the success of the <20>renew<65> operation."
::= { tnIPv4MgmtEntry 9 }
--
-- IP Extension table
--
tnIPv6MgmtTable OBJECT-TYPE
SYNTAX SEQUENCE OF TnIPv6MgmtEntry
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Table of IPv6 status."
::= { tnDevSysIpmgmt 9 }
tnIPv6MgmtEntry OBJECT-TYPE
SYNTAX TnIPv6MgmtEntry
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An entry containing IPv6 status for each device."
INDEX { tnIpv6Interface, tnIPv6Index }
::= { tnIPv6MgmtTable 1 }
TnIPv6MgmtEntry ::=
SEQUENCE {
tnIpv6Interface InterfaceIndex,
tnIPv6Index INTEGER,
tnIPv6Origin IpAddressOriginTC,
tnIPv6CfgMethod INTEGER,
tnIPv6AddressType INTEGER,
tnIPv6Prefix InetAddress,
tnIPv6PrefixLen INTEGER,
tnIPv6Address InetAddress,
tnIPv6RouterAddr InetAddress,
tnIPv6DupAddressDetected INTEGER,
tnIPv6Scope INTEGER,
tnIPv6MTU INTEGER,
tnIPv6LinkMTU INTEGER,
tnIPv6Status INTEGER
}
tnIpv6Interface OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The ifIndex for the IP interface."
::= { tnIPv6MgmtEntry 1 }
tnIPv6Index OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Index of server table."
::= { tnIPv6MgmtEntry 2 }
tnIPv6Origin OBJECT-TYPE
SYNTAX IpAddressOriginTC
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The origin of the address.
For a detailed description of this type, please refer to IP-MIB.
manual(2) indicates that the address was manually configured
to a specified address, e.g., by user configuration.
linklayer(5) indicates an address created by IPv6 stateless"
::= { tnIPv6MgmtEntry 3 }
tnIPv6CfgMethod OBJECT-TYPE
SYNTAX INTEGER
{
link-local(1),
stateless(2),
auto(3),
manual(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "(1)link-local.
(2)auto stateless.
(3)auto state.
(4) manual
Use this OID to change the method of IP management access for the device."
::= { tnIPv6MgmtEntry 4 }
tnIPv6AddressType OBJECT-TYPE
SYNTAX INTEGER
{
anycast(1),
unicast(2),
multicast(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The address type of ipAddressPrefix."
::= { tnIPv6MgmtEntry 5 }
tnIPv6Prefix OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The prefix associated with the this interface."
::= { tnIPv6MgmtEntry 6 }
tnIPv6PrefixLen OBJECT-TYPE
SYNTAX INTEGER(1..128)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The length of the prefix (in bits)."
::= { tnIPv6MgmtEntry 7 }
tnIPv6Address OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Global IPv6 address."
::= { tnIPv6MgmtEntry 8 }
tnIPv6RouterAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "ipv6 default router address."
::= { tnIPv6MgmtEntry 9 }
tnIPv6DupAddressDetected OBJECT-TYPE
SYNTAX INTEGER
{
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "(1)true: duplicate address detected
(2)false: no duplicate"
::= { tnIPv6MgmtEntry 10 }
tnIPv6Scope OBJECT-TYPE
SYNTAX INTEGER
{
node(1),
link(2),
site(3),
organization(4),
host(5),
global(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Scope value used to limit the scope of the address.
unicast address only have scopes of link or global"
::= { tnIPv6MgmtEntry 11 }
tnIPv6MTU OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "MTU maximum transmission unit. Size (in bytes) of the largest protocol data unit."
::= { tnIPv6MgmtEntry 12 }
tnIPv6LinkMTU OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Link MTU maximum transmission unit. Size (in bytes) of the largest protocol data unit."
::= { tnIPv6MgmtEntry 13 }
tnIPv6Status OBJECT-TYPE
SYNTAX INTEGER
{
active(1),
disabled(2),
renew(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "'Renew' restarts ipv6 interfaces. Active sets the status to enabled
Disable sets the status to disabled."
::= { tnIPv6MgmtEntry 14 }
END
Reference in New Issue Copy Permalink