mibs/MIBS/transition/TN-DHCP-RELAY-MIB

316 lines
10 KiB
Plaintext
Raw Permalink Normal View History

2023-12-05 12:25:34 +01:00
-- *****************************************************************
-- TN-DHCP-RELAY-MIB.mib : TN DHCP RELAY private MIB
--
-- Copyright (c) 2015 by Transition Networks, Inc.
-- All rights reserved.
--
-- *****************************************************************
TN-DHCP-RELAY-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
MODULE-IDENTITY, OBJECT-TYPE
FROM SNMPv2-SMI
TEXTUAL-CONVENTION
FROM SNMPv2-TC
tnProducts
FROM TRANSITION-SMI
IpAddress FROM SNMPv2-SMI
Unsigned32 FROM SNMPv2-SMI
TruthValue FROM SNMPv2-TC
;
tnDhcpRelayMib MODULE-IDENTITY
LAST-UPDATED "201504200000Z"
ORGANIZATION "Transition Networks, Inc."
CONTACT-INFO
"Transition Networks
Technical Support
10900 Red Circle Drive
Minnetonka, MN 55343 USA
Tel: +1-800-526-9267
E-mail: techsupport@transition.com"
DESCRIPTION
"The mib module for DHCP settings."
REVISION "201504200000Z"
DESCRIPTION
"Initial Revision of this module"
::= { tnProducts 148 }
TNDhcpRelayInformationPolicyType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This enumeration indicates the DHCP relay information policy type."
SYNTAX INTEGER { replace(0), keep(1), drop(2) }
tnDhcpRelayMibObjects OBJECT IDENTIFIER
::= { tnDhcpRelayMib 1 }
tnDhcpRelayConfig OBJECT IDENTIFIER
::= { tnDhcpRelayMibObjects 2 }
tnDhcpRelayConfigGlobals OBJECT IDENTIFIER
::= { tnDhcpRelayConfig 1 }
tnDhcpRelayConfigGlobalsMode OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Global mode of DHCP relay. true is to enable DHCP relay and false is to
disable it."
::= { tnDhcpRelayConfigGlobals 1 }
tnDhcpRelayConfigGlobalsServerIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Server IP address. This IP address is for DHCP server where the DHCP
relay will relay DHCP packets to."
::= { tnDhcpRelayConfigGlobals 2 }
tnDhcpRelayConfigGlobalsInformationMode OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the DHCP relay information mode option operation. Possible
modes are - Enabled: Enable DHCP relay information mode operation. When
DHCP relay information mode operation is enabled, the agent inserts
specific information (option 82) into a DHCP message when forwarding to
DHCP server and removes it from a DHCP message when transferring to
DHCP client. It only works when DHCP relay operation mode is enabled.
Disabled: Disable DHCP relay information mode operation."
::= { tnDhcpRelayConfigGlobals 3 }
tnDhcpRelayConfigGlobalsInformationPolicy OBJECT-TYPE
SYNTAX TNDhcpRelayInformationPolicyType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the DHCP relay information option policy. When DHCP relay
information mode operation is enabled, if the agent receives a DHCP
message that already contains relay agent information it will enforce
the policy. The 'Replace' policy is invalid when relay information mode
is disabled."
::= { tnDhcpRelayConfigGlobals 4 }
tnDhcpRelayStatus OBJECT IDENTIFIER
::= { tnDhcpRelayMibObjects 3 }
tnDhcpRelayStatusStatistics OBJECT IDENTIFIER
::= { tnDhcpRelayStatus 1 }
tnDhcpRelayStatusStatisticsServerPacketsRelayed OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Packets relayed from server to client."
::= { tnDhcpRelayStatusStatistics 1 }
tnDhcpRelayStatusStatisticsServerPacketErrors OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Errors sending packets to servers."
::= { tnDhcpRelayStatusStatistics 2 }
tnDhcpRelayStatusStatisticsClientPacketsRelayed OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Packets relayed from client to server."
::= { tnDhcpRelayStatusStatistics 3 }
tnDhcpRelayStatusStatisticsClientPacketErrors OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Errors sending packets to clients."
::= { tnDhcpRelayStatusStatistics 4 }
tnDhcpRelayStatusStatisticsAgentOptionErrors OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets forwarded without agent options because there was no
room."
::= { tnDhcpRelayStatusStatistics 5 }
tnDhcpRelayStatusStatisticsMissingAgentOption OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets dropped because no RAI option matching our ID was
found."
::= { tnDhcpRelayStatusStatistics 6 }
tnDhcpRelayStatusStatisticsBadCircuitId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Circuit ID option in matching RAI option did not match any known
circuit ID."
::= { tnDhcpRelayStatusStatistics 7 }
tnDhcpRelayStatusStatisticsMissingCircuitId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Circuit ID option in matching RAI option was missing."
::= { tnDhcpRelayStatusStatistics 8 }
tnDhcpRelayStatusStatisticsBadRemoteId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Remote ID option in matching RAI option did not match any known remote
ID."
::= { tnDhcpRelayStatusStatistics 9 }
tnDhcpRelayStatusStatisticsMissingRemoteId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Remote ID option in matching RAI option was missing."
::= { tnDhcpRelayStatusStatistics 10 }
tnDhcpRelayStatusStatisticsReceiveServerPackets OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Receive DHCP message from server."
::= { tnDhcpRelayStatusStatistics 11 }
tnDhcpRelayStatusStatisticsReceiveClientPackets OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Receive DHCP message from client."
::= { tnDhcpRelayStatusStatistics 12 }
tnDhcpRelayStatusStatisticsReceiveClientAgentOption OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Receive relay agent information option from client."
::= { tnDhcpRelayStatusStatistics 13 }
tnDhcpRelayStatusStatisticsReplaceAgentOption OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Replace relay agent information option."
::= { tnDhcpRelayStatusStatistics 14 }
tnDhcpRelayStatusStatisticsKeepAgentOption OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Keep relay agent information option."
::= { tnDhcpRelayStatusStatistics 15 }
tnDhcpRelayStatusStatisticsDropAgentOption OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Drop relay agent information option."
::= { tnDhcpRelayStatusStatistics 16 }
tnDhcpRelayControl OBJECT IDENTIFIER
::= { tnDhcpRelayMibObjects 4 }
tnDhcpRelayControlClearStatistics OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The action to clear statistics. true is to clear the statistics data.
false, then, does nothing."
::= { tnDhcpRelayControl 1 }
tnDhcpRelayMibConformance OBJECT IDENTIFIER
::= { tnDhcpRelayMib 2 }
tnDhcpRelayMibCompliances OBJECT IDENTIFIER
::= { tnDhcpRelayMibConformance 1 }
tnDhcpRelayMibGroups OBJECT IDENTIFIER
::= { tnDhcpRelayMibConformance 2 }
tnDhcpRelayConfigGlobalsInfoGroup OBJECT-GROUP
OBJECTS { tnDhcpRelayConfigGlobalsMode,
tnDhcpRelayConfigGlobalsServerIpAddress,
tnDhcpRelayConfigGlobalsInformationMode,
tnDhcpRelayConfigGlobalsInformationPolicy }
STATUS current
DESCRIPTION
"A collection of objects suitable for bulk operations."
::= { tnDhcpRelayMibGroups 1 }
tnDhcpRelayStatusStatisticsInfoGroup OBJECT-GROUP
OBJECTS { tnDhcpRelayStatusStatisticsServerPacketsRelayed,
tnDhcpRelayStatusStatisticsServerPacketErrors,
tnDhcpRelayStatusStatisticsClientPacketsRelayed,
tnDhcpRelayStatusStatisticsClientPacketErrors,
tnDhcpRelayStatusStatisticsAgentOptionErrors,
tnDhcpRelayStatusStatisticsMissingAgentOption,
tnDhcpRelayStatusStatisticsBadCircuitId,
tnDhcpRelayStatusStatisticsMissingCircuitId,
tnDhcpRelayStatusStatisticsBadRemoteId,
tnDhcpRelayStatusStatisticsMissingRemoteId,
tnDhcpRelayStatusStatisticsReceiveServerPackets,
tnDhcpRelayStatusStatisticsReceiveClientPackets,
tnDhcpRelayStatusStatisticsReceiveClientAgentOption,
tnDhcpRelayStatusStatisticsReplaceAgentOption,
tnDhcpRelayStatusStatisticsKeepAgentOption,
tnDhcpRelayStatusStatisticsDropAgentOption }
STATUS current
DESCRIPTION
"A collection of objects suitable for bulk operations."
::= { tnDhcpRelayMibGroups 2 }
tnDhcpRelayControlInfoGroup OBJECT-GROUP
OBJECTS { tnDhcpRelayControlClearStatistics }
STATUS current
DESCRIPTION
"A collection of objects suitable for bulk operations."
::= { tnDhcpRelayMibGroups 3 }
tnDhcpRelayMibCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for the implementation."
MODULE -- this module
MANDATORY-GROUPS { tnDhcpRelayConfigGlobalsInfoGroup,
tnDhcpRelayStatusStatisticsInfoGroup,
tnDhcpRelayControlInfoGroup }
::= { tnDhcpRelayMibCompliances 1 }
END