david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
main
mibs/MIBS/transition/TN-ETHSOAM-MIB

1863 lines
62 KiB
Plaintext
Raw Permalink Normal View History

Initial commit
2023-12-05 12:25:34 +01:00
-- *****************************************************************
-- TN-ETHSOAM-MIB.my : TN Ethernet OAM MIB
--
-- Author : Angela Xing & Tony Lei
--
-- Copyright (c) 2014 by Transition Networks, Inc.
-- All rights reserved.
--
-- *************************************************************************************************
--
TN-ETHSOAM-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
NOTIFICATION-TYPE,
OBJECT-TYPE,
Unsigned32,
Integer32,
Gauge32
FROM SNMPv2-SMI
MODULE-COMPLIANCE,
OBJECT-GROUP,
NOTIFICATION-GROUP
FROM SNMPv2-CONF
TEXTUAL-CONVENTION, RowStatus,TruthValue,
MacAddress
FROM SNMPv2-TC -- [RFC2579]
InterfaceIndex,
InterfaceIndexOrZero
FROM IF-MIB
IEEE8021PriorityValue
FROM IEEE8021-TC-MIB
VlanIdOrNone, VlanId
FROM Q-BRIDGE-MIB
dot1agCfmMepEntry, dot1agCfmLtrEntry,
dot1agCfmMepIdentifier
FROM IEEE8021-CFM-MIB -- IEEE 802.1ag
tnProducts
FROM TRANSITION-SMI;
-- Textual Conventions
Dot1agCfmMepId ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"Maintenance association End Point Identifier (MEPID): A small
integer, unique over a given Maintenance Association,
identifying a specific MEP.
"
REFERENCE
"802.1ag clauses 3.19 and 19.2.1"
SYNTAX Unsigned32 (1..8191)
Dot1agCfmMpDirection ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Indicates the direction in which the Maintenance
association (MEP or MIP) faces on the bridge port:
down(1) Sends Continuity Check Messages away from the
MAC Relay Entity.
up(2) Sends Continuity Check Messages towards the
MAC Relay Entity.
"
REFERENCE
"802.1ag clauses 12.14.6.3.2:c"
SYNTAX INTEGER {
down (1),
up (2)
}
Dot1agCfmMaintDomainName ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Denotes a generic Maintenance Domain Name.
A Dot1agCfmMaintDomainName value is always interpreted within
the context of a Dot1agCfmMaintDomainNameType value. Every
usage of the Dot1agCfmMaintDomainName textual convention is
required to specify the Dot1agCfmMaintDomainNameType object
that provides the context. It is suggested that the
Dot1agCfmMaintDomainNameType object be logically registered
before the object(s) that use the Dot1agCfmMaintDomainName
textual convention, if they appear in the same logical row.
The value of a Dot1agCfmMaintDomainName object must always
be consistent with the value of the associated
Dot1agCfmMaintDomainNameType object. Attempts to set
an Dot1agCfmMaintDomainName object to a value inconsistent
with the associated Dot1agCfmMaintDomainNameType must fail
with an inconsistentValue error.
When this textual convention is used as the syntax of an
index object, there may be issues with the limit of 128
sub-identifiers specified in SMIv2, IETF STD 58. In this
case, the object definition MUST include a 'SIZE' clause
to limit the number of potential instance sub-identifiers;
otherwise the applicable constraints MUST be stated in
the appropriate conceptual row DESCRIPTION clauses, or
in the surrounding documentation if there is no single
DESCRIPTION clause that is appropriate.
A value of none(1) in the associated
Dot1agCfmMaintDomainNameType object means that no Maintenance
Domain name is present, and the contents of the
Dot1agCfmMaintDomainName object are meaningless.
See the DESCRIPTION of the Dot1agCfmMaintAssocNameType
TEXTUAL-CONVENTION for a discussion of the length limits on
the Maintenance Domain name and Maintenance Association name.
"
REFERENCE
"802.1ag clause 21.6.5"
SYNTAX OCTET STRING (SIZE(1..43))
Dot1agCfmMaintAssocName ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Denotes a generic Maintenance Association Name. It is the
part of the Maintenance Association Identifier which is
unique within the Maintenance Domain Name and is appended
to the Maintenance Domain Name to form the Maintenance
Association Identifier (MAID).
A Dot1agCfmMaintAssocName value is always interpreted within
the context of a Dot1agCfmMaintAssocNameType value. Every
usage of the Dot1agCfmMaintAssocName textual convention is
required to specify the Dot1agCfmMaintAssocNameType object
that provides the context. It is suggested that the
Dot1agCfmMaintAssocNameType object be logically registered
before the object(s) that use the Dot1agCfmMaintAssocName
textual convention, if they appear in the same logical row.
The value of a Dot1agCfmMaintAssocName object must
always be consistent with the value of the associated
Dot1agCfmMaintAssocNameType object. Attempts to set
an Dot1agCfmMaintAssocName object to a value inconsistent
with the associated Dot1agCfmMaintAssocNameType must fail
with an inconsistentValue error.
When this textual convention is used as the syntax of an
index object, there may be issues with the limit of 128
sub-identifiers specified in SMIv2, IETF STD 58. In this
case, the object definition MUST include a 'SIZE' clause
to limit the number of potential instance sub-identifiers;
otherwise the applicable constraints MUST be stated in
the appropriate conceptual row DESCRIPTION clauses, or
in the surrounding documentation if there is no single
DESCRIPTION clause that is appropriate.
"
REFERENCE
"802.1ag clauses 21.6.5.4, 21.6.5.5, 21.6.5.6"
SYNTAX OCTET STRING (SIZE(1..45))
Dot1agCfmMDLevel ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"Integer identifying the Maintenance Domain Level (MD Level).
Higher numbers correspond to higher Maintenance Domains,
those with the greatest physical reach, with the highest
values for customers' CFM PDUs. Lower numbers correspond
to lower Maintenance Domains, those with more limited
physical reach, with the lowest values for CFM PDUs
protecting single bridges or physical links.
"
REFERENCE
"802.1ag clauses 18.3, 21.4.1"
SYNTAX Integer32 (0..7)
TnEthSoamType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Indicates the type of the domain in which the Maintenance
association.
"
SYNTAX INTEGER {
port (1),
esp (2),
evc (3),
vlan (4),
mplslink (5),
mplstunnel (6),
mplspw (7),
mplslsp (8)
}
TnEthSoamTestPatternType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This enumeration data type indicates the type of test pattern to be
sent in an OAM PDU Test TLV.
The valid enumerated values associated with this type are:
All Zreo(1) pattern will be '00000000'
All One(2) pattern will be '11111111'
OneZero(3) pattern will be '10101010'
"
REFERENCE
"[MEF7.1], Appendix III.2 Enumeration, [Y.1731] 7.7"
SYNTAX INTEGER {
allzero (1),
allone (2),
onezero (3)
}
--
-- main body
--
tnEthSoamMIB MODULE-IDENTITY
LAST-UPDATED "201405060000Z"
ORGANIZATION "Transition Networks, Inc."
CONTACT-INFO
"Transition Networks
Technical Support
10900 Red Circle Drive
Minnetonka, MN 55343 USA
Tel: +1-800-526-9267
E-mail: techsupport@transition.com
"
DESCRIPTION
"TBD"
REVISION "201204200000Z"
DESCRIPTION
"Initial version of this MIB module."
REVISION "201405060000Z"
DESCRIPTION
"Added Serval MIB tnEthSoamVOE to this MIB module."
::= { tnProducts 105 }
tnEthSoamMIBNotifications OBJECT IDENTIFIER ::= { tnEthSoamMIB 0 }
tnEthSoamMIBObjects OBJECT IDENTIFIER ::= { tnEthSoamMIB 1 }
tnEthSoamMIBConformance OBJECT IDENTIFIER ::= { tnEthSoamMIB 2 }
-- ******************************************************************
-- NOTIFICATIONS (TRAPS)
-- These notifications will be sent to the management entity
-- whenever a MEP active/disactive contact with one or more other MEPs.
-- ******************************************************************
tnEthSoamFaultAlarm NOTIFICATION-TYPE
OBJECTS { dot1agCfmMepIdentifier,
tnEthSoamStatusCCMLevel,
tnEthSoamStatusCCMMeg,
tnEthSoamStatusCCMMep,
tnEthSoamStatusAIS,
tnEthSoamStatusCLK,
tnEthSoamStatusSSF
}
STATUS current
DESCRIPTION
"An EthSoam has a persistent defect condition. A notification
(fault alarm) is sent to the management entity with the OID
of the EthSoam that has detected the fault.
The management entity receiving the notification can identify
the system from the network source address of the
notification, and can identify the EthSoam reporting the defect
by the indices in the OID of the variables in the notification:
tnEthSoamInstance - Also the index of the EthSoam status table entry
(tnEthSoamStatusTable).
"
::= { tnEthSoamMIBNotifications 1 }
tnEthSoamPeerFaultAlarm NOTIFICATION-TYPE
OBJECTS { dot1agCfmMepIdentifier,
tnEthSoamPeerStatuscLOC,
tnEthSoamPeerStatuscRDI,
tnEthSoamPeerStatuscPeriod,
tnEthSoamPeerStatuscPriority
}
STATUS current
DESCRIPTION
"An EthSoamPeer has a persistent defect condition. A notification
(fault alarm) is sent to the management entity with the OID
of the EthSoamPeer that has detected the fault.
The management entity receiving the notification can identify
the system from the network source address of the
notification, and can identify the EthSoamPeer reporting the defect
by the indices in the OID of the variables in the notification:
tnEthSoamInstance - Also the index of the EthSoam Peer status table entry
(tnEthSoamPeerStatusTable).
tnEthSoamPeerStatusMepId - Also the index of the EthSoam Peer status table entry
(tnEthSoamPeerStatusTable).
"
::= { tnEthSoamMIBNotifications 2 }
--
-- sub Objects list
--
tnEthSoamMPMgmt OBJECT IDENTIFIER ::= { tnEthSoamMIBObjects 1 }
tnEthSoamPeerCfgMgmt OBJECT IDENTIFIER ::= { tnEthSoamMIBObjects 2 }
tnEthSoamPeerStatusMgmt OBJECT IDENTIFIER ::= { tnEthSoamMIBObjects 3 }
tnEthSoamAPSCfgMgmt OBJECT IDENTIFIER ::= { tnEthSoamMIBObjects 4 }
tnEthSoamClientCfgMgmt OBJECT IDENTIFIER ::= { tnEthSoamMIBObjects 5 }
tnEthSoamLocalCfgMgmt OBJECT IDENTIFIER ::= { tnEthSoamMIBObjects 6 }
tnEthSoamStatusMgmt OBJECT IDENTIFIER ::= { tnEthSoamMIBObjects 7 }
tnEthSoamLossStateMgmt OBJECT IDENTIFIER ::= { tnEthSoamMIBObjects 8 }
tnEthSoamTSExtMgmt OBJECT IDENTIFIER ::= { tnEthSoamMIBObjects 9 }
tnEthSoamLtmMgmt OBJECT IDENTIFIER ::= { tnEthSoamMIBObjects 10 }
tnEthSoamLtrMgmt OBJECT IDENTIFIER ::= { tnEthSoamMIBObjects 11 }
tnEthSoamAisCfgMgmt OBJECT IDENTIFIER ::= { tnEthSoamMIBObjects 12 }
tnEthSoamDmCfgMgmt OBJECT IDENTIFIER ::= { tnEthSoamMIBObjects 13 }
tnEthSoamDmStateMgmt OBJECT IDENTIFIER ::= { tnEthSoamMIBObjects 14 }
-- ******************************************************************
-- tn tnEthSoamMPtabletable by Tony Lei
-- ******************************************************************
tnEthSoamMPTable OBJECT-TYPE
SYNTAX SEQUENCE OF TnEthSoamMPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides configuration of SOAM Maintenance Point.
"
::= { tnEthSoamMPMgmt 1 }
tnEthSoamMPEntry OBJECT-TYPE
SYNTAX TnEthSoamMPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A entry in the table represents a configuration for local SOAM."
INDEX { tnEthSoaminstance }
::= { tnEthSoamMPTable 1 }
TnEthSoamMPEntry ::=
SEQUENCE{
tnEthSoaminstance Unsigned32,
tnEthSoamDomaintype TnEthSoamType,
tnEthSoamMode INTEGER,
tnEthSoamdirection Dot1agCfmMpDirection,
tnEthSoamresidencePort InterfaceIndex,
tnEthSoamlevel Dot1agCfmMDLevel,
tnEthSoamFlowInstance INTEGER,
tnEthSoamTaggedVID VlanIdOrNone,
tnEthSoamAlarm TruthValue,
tnEthSoamStatus RowStatus
}
tnEthSoaminstance OBJECT-TYPE
SYNTAX Unsigned32(1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is the configuration of the two possible Maintenance Association Identifier formats.
ITU ICC: This is defined by ITU. 'ICC' can be max. 6 char. 'MEG id' can be max. 7 char.
IEEE String: This is defined by IEEE. 'Domain Name' can be max. 8 char. 'MEG id' can be max. 8 char.
"
::= { tnEthSoamMPEntry 1 }
tnEthSoamDomaintype OBJECT-TYPE
SYNTAX TnEthSoamType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Domain Mode affects the OAM. The allowed values are
Port: This is a MEP in the Port Domain. 'Flow Instance' is a Port.
Esp: Future use.
Evc: This is a MEP in the EVC Domain. 'Flow Instance' is a EVC.
Mpls: Future use.
Vlan: This is a MEP in the VLAN Domain. 'Flow Instance' is a VLAN.
"
::= { tnEthSoamMPEntry 2}
tnEthSoamMode OBJECT-TYPE
SYNTAX INTEGER{
mep (1),
mip (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"MEP: This is a Maintenance Entity End Point.
MIP: This is a Maintenance Entity Intermediate Point.
"
::= { tnEthSoamMPEntry 3}
tnEthSoamdirection OBJECT-TYPE
SYNTAX Dot1agCfmMpDirection
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Direction in which the MP faces on the Bridge Port.
"
::= { tnEthSoamMPEntry 4}
tnEthSoamresidencePort OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is the interface index of the interface either a
bridge port, or an aggregated IEEE 802.1 link within a bridge
port, to which the MEP is attached."
::= { tnEthSoamMPEntry 5}
tnEthSoamlevel OBJECT-TYPE
SYNTAX Dot1agCfmMDLevel
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Level of the Maintenance Point."
::= { tnEthSoamMPEntry 6}
tnEthSoamFlowInstance OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The MEP is related to this flow - See 'Domain'."
::= { tnEthSoamMPEntry 7}
tnEthSoamTaggedVID OBJECT-TYPE
SYNTAX VlanIdOrNone
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Port MEP: An outer C/S-tag (depending on VLAN Port Type) is added with this VID.
Entering '0' means no TAG added."
::= { tnEthSoamMPEntry 8}
tnEthSoamAlarm OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An active alarm on the MEP.
"
::= { tnEthSoamMPEntry 9}
tnEthSoamStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of the row.
The writable columns in a row can not be changed if the row
is active. All columns must have a valid value before a row
can be activated.
"
::= { tnEthSoamMPEntry 11 }
-- ******************************************************************
-- tn S3280 SOAM peer configuration managment table by Angelax
-- ******************************************************************
tnEthSoamPeerCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF TnEthSoamPeerCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table has entries which generate a configuration for peer SOAM.
"
::= { tnEthSoamPeerCfgMgmt 1 }
tnEthSoamPeerCfgEntry OBJECT-TYPE
SYNTAX TnEthSoamPeerCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A entry in the table represents a configuration for peer SOAM.
"
INDEX { tnEthSoaminstance, tnEthSoamPeerCfgMepId }
::= { tnEthSoamPeerCfgTable 1 }
TnEthSoamPeerCfgEntry ::=
SEQUENCE{
tnEthSoamPeerCfgMepId Dot1agCfmMepId,
tnEthSoamPeerCfgUnicastMac MacAddress,
tnEthSoamPeerCfgRowState RowStatus
}
tnEthSoamPeerCfgMepId OBJECT-TYPE
SYNTAX Dot1agCfmMepId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ID of the MEP.
"
::= { tnEthSoamPeerCfgEntry 1 }
tnEthSoamPeerCfgUnicastMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This MAC will be used when unicast is selected with this peer MEP.
Also this MAC is used to create HW checking of receiving CCM PDU (LOC detection) from this MEP.
"
::= { tnEthSoamPeerCfgEntry 2 }
tnEthSoamPeerCfgRowState OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"row status.
"
::= { tnEthSoamPeerCfgEntry 3 }
-- ******************************************************************
-- tn S3280 SOAM tnEthSoampeerstatustable by Tony Lei
-- ******************************************************************
tnEthSoamPeerStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF TnEthSoamPeerStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides configuration about the SOAM that provide
OAM services.
"
::= { tnEthSoamPeerStatusMgmt 1 }
tnEthSoamPeerStatusEntry OBJECT-TYPE
SYNTAX TnEthSoamPeerStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entry represents configuration about the SOAM that provide
OAM services.
"
INDEX { tnEthSoaminstance,tnEthSoamPeerStatusMepId }
::= { tnEthSoamPeerStatusTable 1 }
TnEthSoamPeerStatusEntry ::= SEQUENCE{
tnEthSoamPeerStatusMepId Dot1agCfmMepId,
tnEthSoamPeerStatuscLOC TruthValue,
tnEthSoamPeerStatuscRDI TruthValue,
tnEthSoamPeerStatuscPeriod TruthValue,
tnEthSoamPeerStatuscPriority TruthValue
}
tnEthSoamPeerStatusMepId OBJECT-TYPE
SYNTAX Dot1agCfmMepId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MEPID.
"
::= { tnEthSoamPeerStatusEntry 1}
tnEthSoamPeerStatuscLOC OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Fault Cause indicating that no CCM has been received (in 3,5 periods) - from this peer MEP.
"
::= { tnEthSoamPeerStatusEntry 2}
tnEthSoamPeerStatuscRDI OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Fault Cause indicating that a CCM is received with Remote Defect Indication - from this peer MEP.
"
::= { tnEthSoamPeerStatusEntry 3}
tnEthSoamPeerStatuscPeriod OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Fault Cause indicating that a CCM is received with a period different what is configured for this MEP - from this peer MEP.
"
::= { tnEthSoamPeerStatusEntry 4}
tnEthSoamPeerStatuscPriority OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Fault Cause indicating that a CCM is received with a priority different what is configured for this MEP - from this peer MEP.
"
::= { tnEthSoamPeerStatusEntry 5}
-- ******************************************************************
-- tn S3280 SOAM tnEthSoamAPSCfgtable table by angelax
-- ******************************************************************
tnEthSoamAPSCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF TnEthSoamAPSCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides configuration about the APSCfg that provide
OAM services.
"
::= { tnEthSoamAPSCfgMgmt 1 }
tnEthSoamAPSCfgEntry OBJECT-TYPE
SYNTAX TnEthSoamAPSCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entry represents configuration about the SOAM that provide
OAM services.
"
INDEX { tnEthSoaminstance }
::= { tnEthSoamAPSCfgTable 1 }
TnEthSoamAPSCfgEntry ::= SEQUENCE{
tnEthSoamAPSCfgEnable TruthValue,
tnEthSoamAPSCfgPriority IEEE8021PriorityValue,
tnEthSoamAPSCfgCast INTEGER,
tnEthSoamAPSCfgType INTEGER,
tnEthSoamAPSCfgLastOctet Unsigned32
}
tnEthSoamAPSCfgEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Automatic Protection Switching protocol information transportation based on transmitting/receiving R-APS/L-APS PDU can be enabled/disabled.
Must be enabled to support ERPS/ELPS implementing APS. This is only valid with one Peer MEP configured.
"
::= { tnEthSoamAPSCfgEntry 1}
tnEthSoamAPSCfgPriority OBJECT-TYPE
SYNTAX IEEE8021PriorityValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The priority to be inserted as PCP bits in TAG (if any). "
::= { tnEthSoamAPSCfgEntry 2}
tnEthSoamAPSCfgCast OBJECT-TYPE
SYNTAX INTEGER {
unicast (0),
multicast (1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Selection of APS PDU transmitted unicast or multi-cast.
The unicast MAC will be taken from the 'Unicast Peer MAC' configuration.
Unicast is only valid for L-APS - see 'Type'.
The R-APS PDU is always transmitted with multi-cast MAC described in G.8032.
"
::= { tnEthSoamAPSCfgEntry 3}
tnEthSoamAPSCfgType OBJECT-TYPE
SYNTAX INTEGER {
raps (0),
laps (1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"R-APS: APS PDU is transmitted as R-APS - this is for ERPS.
L-APS: APS PDU is transmitted as L-APS - this is for ELPS.
"
::= { tnEthSoamAPSCfgEntry 4}
tnEthSoamAPSCfgLastOctet OBJECT-TYPE
SYNTAX Unsigned32(0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This is the last octet of the transmitted and expected RAPS multi-cast MAC.
In G.8031 (03/2010) a RAPS multi-cast MAC is defined as 01-19-A7-00-00-XX.
In current standard the value for this last octet is '01' and the usage of other values is for further study.
"
::= { tnEthSoamAPSCfgEntry 5}
-- ******************************************************************
-- tn S3280 SOAM tnEthSoamClientCfgtable table by angelax
-- ******************************************************************
tnEthSoamClientCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF TnEthSoamClientCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides configuration about the Link Trace reply that provide
OAM services.
"
::= { tnEthSoamClientCfgMgmt 1 }
tnEthSoamClientCfgEntry OBJECT-TYPE
SYNTAX TnEthSoamClientCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entry represents configuration about the Client Configuration that provide
OAM services.
"
INDEX { tnEthSoaminstance}
::= { tnEthSoamClientCfgTable 1 }
TnEthSoamClientCfgEntry ::= SEQUENCE{
tnEthSoamClientCfgDomain TnEthSoamType,
tnEthSoamClientCfgLevel Dot1agCfmMDLevel,
tnEthSoamClientCfgFlow1 Unsigned32,
tnEthSoamClientCfgFlow2 Unsigned32,
tnEthSoamClientCfgFlow3 Unsigned32,
tnEthSoamClientCfgFlow4 Unsigned32,
tnEthSoamClientCfgFlow5 Unsigned32,
tnEthSoamClientCfgFlow6 Unsigned32,
tnEthSoamClientCfgFlow7 Unsigned32,
tnEthSoamClientCfgFlow8 Unsigned32,
tnEthSoamClientCfgFlow9 Unsigned32,
tnEthSoamClientCfgFlow10 Unsigned32
}
tnEthSoamClientCfgDomain OBJECT-TYPE
SYNTAX TnEthSoamType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The domain of the client layer. Must be EVC.
"
::= { tnEthSoamClientCfgEntry 1}
tnEthSoamClientCfgLevel OBJECT-TYPE
SYNTAX Dot1agCfmMDLevel
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Client layer level - meaning that PDU transmitted in client layer flows will be on this level.
"
::= { tnEthSoamClientCfgEntry 2}
tnEthSoamClientCfgFlow1 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Client layer flow instance numbers.
"
::= { tnEthSoamClientCfgEntry 3}
tnEthSoamClientCfgFlow2 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Client layer flow instance numbers.
"
::= { tnEthSoamClientCfgEntry 4}
tnEthSoamClientCfgFlow3 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Client layer flow instance numbers.
"
::= { tnEthSoamClientCfgEntry 5}
tnEthSoamClientCfgFlow4 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Client layer flow instance numbers.
"
::= { tnEthSoamClientCfgEntry 6}
tnEthSoamClientCfgFlow5 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Client layer flow instance numbers.
"
::= { tnEthSoamClientCfgEntry 7}
tnEthSoamClientCfgFlow6 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Client layer flow instance numbers.
"
::= { tnEthSoamClientCfgEntry 8}
tnEthSoamClientCfgFlow7 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Client layer flow instance numbers.
"
::= { tnEthSoamClientCfgEntry 9}
tnEthSoamClientCfgFlow8 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Client layer flow instance numbers.
"
::= { tnEthSoamClientCfgEntry 10}
tnEthSoamClientCfgFlow9 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Client layer flow instance numbers.
"
::= { tnEthSoamClientCfgEntry 11}
tnEthSoamClientCfgFlow10 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Client layer flow instance numbers.
"
::= { tnEthSoamClientCfgEntry 12}
-- ******************************************************************
-- tn S3280 SOAM local configuration managment table by Angelax
-- ******************************************************************
tnEthSoamLocalCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF TnEthSoamLocalCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table has entries which generate a configuration for local SOAM.
"
::= { tnEthSoamLocalCfgMgmt 1 }
tnEthSoamLocalCfgEntry OBJECT-TYPE
SYNTAX TnEthSoamLocalCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A entry in the table represents a configuration for local SOAM."
INDEX { tnEthSoaminstance }
::= { tnEthSoamLocalCfgTable 1 }
TnEthSoamLocalCfgEntry ::=
SEQUENCE{
tnEthSoamFormat INTEGER,
tnEthSoamDomainName OCTET STRING,
tnEthSoamMegOrMaName OCTET STRING,
tnEthSoamMepID Dot1agCfmMepId,
tnEthSoamCcmInterval INTEGER,
tnEthSoamEVCQos INTEGER,
tnEthSoamEVCPolicyID INTEGER,
tnEthSoamVOE TruthValue
}
tnEthSoamFormat OBJECT-TYPE
SYNTAX INTEGER {
itu (1),
ieee (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the configuration of the two possible Maintenance Association Identifier formats.
ITU ICC: This is defined by ITU. 'ICC' can be max. 6 char. 'MEG id' can be max. 7 char.
IEEE String: This is defined by IEEE. 'Domain Name' can be max. 8 char. 'MEG id' can be max. 8 char.
"
::= { tnEthSoamLocalCfgEntry 1 }
tnEthSoamDomainName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is either ITU ICC (MEG ID value[1-6]) or IEEE Maintenance Domain Name - depending on 'Format'. See 'Format'.
"
::= { tnEthSoamLocalCfgEntry 2 }
tnEthSoamMegOrMaName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is either ITU UMC (MEG ID value[7-13]) or IEEE Short MA Name - depending on 'Format'. See 'Format'.
In case of ITU ICC format this can be max. 7 char. If only 6 char. is entered the MEG ID value[13] will become NULL."
::= { tnEthSoamLocalCfgEntry 3 }
tnEthSoamMepID OBJECT-TYPE
SYNTAX Dot1agCfmMepId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This value will become the transmitted two byte CCM MEP ID."
::= { tnEthSoamLocalCfgEntry 4 }
tnEthSoamCcmInterval OBJECT-TYPE
SYNTAX INTEGER {
interval300s (1),
interval100s (2),
interval10s (3),
interval1s (4),
interval6M (5),
interval1M (6),
interval6H (7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Interval between CCM transmissions to be used by all MEPs
in the MA.
"
::= { tnEthSoamLocalCfgEntry 5 }
tnEthSoamEVCQos OBJECT-TYPE
SYNTAX INTEGER(0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is only relevant for a EVC MEP.
This is the Qos of the EVC used for getting QoS counters for Loss Measurement.
"
::= { tnEthSoamLocalCfgEntry 6 }
tnEthSoamEVCPolicyID OBJECT-TYPE
SYNTAX INTEGER(1..128)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is relevant for an EVC Egress/Up-MEP. This is the Policy number of the relevant ECE.
The Policy ID that the generated TST frames will get as IS1 action. Can be the same as any ECE Policy Number,
enabling it to hit the same ACL and thereby the same EVC policer.
"
::= { tnEthSoamLocalCfgEntry 7 }
tnEthSoamVOE OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This will attempt to utilize VOE HW for MEP implementation. Not all platforms support VOE.
"
::= { tnEthSoamLocalCfgEntry 8 }
-- ******************************************************************
-- tn S3280 SOAM tnEthSoamStatusTable managment table by Tony Lei
-- ******************************************************************
tnEthSoamStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF TnEthSoamStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides configuration about the SOAM that provide
OAM services.
"
::= { tnEthSoamStatusMgmt 1 }
tnEthSoamStatusEntry OBJECT-TYPE
SYNTAX TnEthSoamStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entry represents configuration about the SOAM that provide
OAM services.
"
INDEX { tnEthSoaminstance }
::= { tnEthSoamStatusTable 1 }
TnEthSoamStatusEntry ::= SEQUENCE {
tnEthSoamStatusCCMLevel TruthValue,
tnEthSoamStatusCCMMeg TruthValue,
tnEthSoamStatusCCMMep TruthValue,
tnEthSoamStatusAIS TruthValue,
tnEthSoamStatusCLK TruthValue,
tnEthSoamStatusSSF TruthValue,
tnEthSoamStatusBLK TruthValue,
tnEthSoamStatusTSF TruthValue
}
tnEthSoamStatusCCMLevel OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Fault Cause indicating that a CCM is received with a lower level than the configured for this MEP.
"
::= { tnEthSoamStatusEntry 1}
tnEthSoamStatusCCMMeg OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Fault Cause indicating that a CCM is received with a MEG ID different from configured for this MEP.
"
::= { tnEthSoamStatusEntry 2}
tnEthSoamStatusCCMMep OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Fault Cause indicating that a CCM is received with a MEP ID different from all 'Peer MEP ID' configured for this MEP.
"
::= { tnEthSoamStatusEntry 3}
tnEthSoamStatusAIS OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Fault Cause indicating that AIS PDU is received.
"
::= { tnEthSoamStatusEntry 4}
tnEthSoamStatusCLK OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Fault Cause indicating that LCK PDU is received.
"
::= { tnEthSoamStatusEntry 5}
tnEthSoamStatusSSF OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Fault Cause indicating that server layer is indicating Signal Fail.
"
::= { tnEthSoamStatusEntry 6}
tnEthSoamStatusBLK OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The consequent action of blocking service frames in this flow is active.
"
::= { tnEthSoamStatusEntry 7}
tnEthSoamStatusTSF OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The consequent action of indicating Trail Signal Fail to-wards protection is active.
"
::= { tnEthSoamStatusEntry 8}
-- ******************************************************************
-- tn S3280 SOAM loss measurement State table
-- ******************************************************************
tnEthSoamLossStateTable OBJECT-TYPE
SYNTAX SEQUENCE OF TnEthSoamLossStateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table has entries which generate a configuration for loss measurement State.
"
::= { tnEthSoamLossStateMgmt 1 }
tnEthSoamLossStateEntry OBJECT-TYPE
SYNTAX TnEthSoamLossStateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A entry in the table represents a configuration for loss measurement State.
"
INDEX { tnEthSoaminstance }
::= { tnEthSoamLossStateTable 1 }
TnEthSoamLossStateEntry ::=
SEQUENCE{
tnEthSoamLossStateTxCount Gauge32,
tnEthSoamLossStateRxCount Gauge32,
tnEthSoamLossStateNELossCount Gauge32,
tnEthSoamLossStateFELossCount Gauge32,
tnEthSoamLossStateNELossRatio Gauge32,
tnEthSoamLossStateFELossRatio Gauge32,
tnEthSoamLossStateAction TruthValue
}
tnEthSoamLossStateTxCount OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The accumulated Tx frame loss count.
"
::= { tnEthSoamLossStateEntry 1 }
tnEthSoamLossStateRxCount OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The accumulated Rx frame loss count.
"
::= { tnEthSoamLossStateEntry 2 }
tnEthSoamLossStateNELossCount OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The accumulated near end frame loss count - since last 'clear'.
"
::= { tnEthSoamLossStateEntry 3 }
tnEthSoamLossStateFELossCount OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The accumulated far end frame loss count - since last 'clear'.
"
::= { tnEthSoamLossStateEntry 4 }
tnEthSoamLossStateNELossRatio OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The near end frame loss ratio calculated based on the near end frame loss count and far end
frame transmitted - in the latest 'FLR Interval'. The result is given in percent.
"
::= { tnEthSoamLossStateEntry 5 }
tnEthSoamLossStateFELossRatio OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The far end frame loss ratio calculated based on the far end frame loss count and
near end frame transmitted - in the latest 'FLR Interval'. The result is given in percent.
"
::= { tnEthSoamLossStateEntry 6 }
tnEthSoamLossStateAction OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set of this check and save will clear the accumulated counters and restart ratio calculation.
"
::= { tnEthSoamLossStateEntry 7 }
-- ******************************************************************
-- tn S3280 SOAM test signal state table
-- ******************************************************************
tnEthSoamTSExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF TnEthSoamTSExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table has entries which generate a configuration for test signal.
"
::= { tnEthSoamTSExtMgmt 1 }
tnEthSoamTSExtEntry OBJECT-TYPE
SYNTAX TnEthSoamTSExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A entry in the table represents a configuration for test signal.
"
INDEX { tnEthSoaminstance }
::= { tnEthSoamTSExtTable 1 }
TnEthSoamTSExtEntry ::=
SEQUENCE {
tnEthSoamTSSeqNum TruthValue,
tnEthSoamTSStateRxRate INTEGER,
tnEthSoamTSStateAction TruthValue,
tnEthSoamTestCfgPattern TnEthSoamTestPatternType
}
tnEthSoamTSSeqNum OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"sequence number.
"
::= { tnEthSoamTSExtEntry 1 }
tnEthSoamTSStateRxRate OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current received TST frame bit rate in 100 Kbps. This is calculated on a 1 s.
basis, starting when first TST frame is received after 'Clear'. The frame size used for this calculation is
the first received after 'Clear' .
"
::= { tnEthSoamTSExtEntry 2 }
tnEthSoamTSStateAction OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This will clear all Test Signal State. Transmission of TST frame will be restarted.
Calculation of 'Rx frame count', 'RX rate' and 'Test time' will be started when receiving first TST frame.
"
::= { tnEthSoamTSExtEntry 3}
tnEthSoamTestCfgPattern OBJECT-TYPE
SYNTAX TnEthSoamTestPatternType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute specifies the type of test pattern to be
sent or received in an OAM PDU Test TLV.
"
REFERENCE
"[MEF7.1] 9.3.4.3"
DEFVAL { allzero } -- changed from none to allzero by Jing
::= { tnEthSoamTSExtEntry 4 }
-- ******************************************************************
-- tn S3280 SOAM tnEthSoamLtm table by angelax
-- ******************************************************************
tnEthSoamLtmTable OBJECT-TYPE
SYNTAX SEQUENCE OF TnEthSoamLtmEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides configuration about ltm priority that provide
OAM services.
"
::= { tnEthSoamLtmMgmt 1 }
tnEthSoamLtmEntry OBJECT-TYPE
SYNTAX TnEthSoamLtmEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entry represents configuration about the SOAM that provide
OAM services.
"
INDEX { tnEthSoaminstance }
::= { tnEthSoamLtmTable 1 }
TnEthSoamLtmEntry ::= SEQUENCE{
tnEthSoamltmPriority IEEE8021PriorityValue
}
tnEthSoamltmPriority OBJECT-TYPE
SYNTAX IEEE8021PriorityValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The priority to be inserted as PCP bits in TAG (if any).
"
::= { tnEthSoamLtmEntry 1}
-- ******************************************************************
-- tn S3280 SOAM tnEthSoamLtr table by angelax
-- ******************************************************************
tnEthSoamLtrTable OBJECT-TYPE
SYNTAX SEQUENCE OF TnEthSoamLtrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides configuration about ltm priority that provide
OAM services.
"
::= { tnEthSoamLtrMgmt 1 }
tnEthSoamLtrEntry OBJECT-TYPE
SYNTAX TnEthSoamLtrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entry represents configuration about the SOAM that provide
OAM services.
"
AUGMENTS { dot1agCfmLtrEntry }
::= { tnEthSoamLtrTable 1 }
TnEthSoamLtrEntry ::= SEQUENCE{
tnEthSoamLtrDirection INTEGER
}
tnEthSoamLtrDirection OBJECT-TYPE
SYNTAX INTEGER{
down (0),
up (1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The priority to be inserted as PCP bits in TAG (if any).
"
::= { tnEthSoamLtrEntry 1}
-- ******************************************************************
-- tn S3280 SOAM tnEthSoamAisCfg table by angelax
-- ******************************************************************
tnEthSoamAisCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF TnEthSoamAisCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides configuration about ais that provide
OAM services.
"
::= { tnEthSoamAisCfgMgmt 1 }
tnEthSoamAisCfgEntry OBJECT-TYPE
SYNTAX TnEthSoamAisCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entry represents configuration about the SOAM that provide
OAM services.
"
AUGMENTS { dot1agCfmMepEntry }
::= { tnEthSoamAisCfgTable 1 }
TnEthSoamAisCfgEntry ::= SEQUENCE{
tnEthSoamAisCfgProtection TruthValue
}
tnEthSoamAisCfgProtection OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Selecting this means that the first 3 AIS PDU is transmitted as fast as possible -
in case of using this for protection in the end point."
::= { tnEthSoamAisCfgEntry 1}
-- ******************************************************************
-- tn S3280 SOAM tnEthSoamDmCfg table by angelax
-- ******************************************************************
tnEthSoamDmCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF TnEthSoamDmCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides configuration about the Delay Measurement that provide
OAM services.
"
::= { tnEthSoamDmCfgMgmt 1 }
tnEthSoamDmCfgEntry OBJECT-TYPE
SYNTAX TnEthSoamDmCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entry represents configuration about the Delay Measurement that provide
OAM services.
"
INDEX { tnEthSoaminstance}
::= { tnEthSoamDmCfgTable 1 }
TnEthSoamDmCfgEntry ::=
SEQUENCE {
tnEthSoamDmCfgEnable TruthValue,
tnEthSoamDmCfgPriority IEEE8021PriorityValue,
tnEthSoamDmCfgCast INTEGER,
tnEthSoamDmCfgPeerId Dot1agCfmMepId,
tnEthSoamDmCfgWayType INTEGER,
tnEthSoamDmCfgTxMode INTEGER,
tnEthSoamDmCfgCalc INTEGER,
tnEthSoamDmCfgGap Unsigned32,
tnEthSoamDmCfgCount INTEGER,
tnEthSoamDmCfgUnit INTEGER,
tnEthSoamDmCfgD2forD1 TruthValue,
tnEthSoamDmCfgCOAction INTEGER
}
tnEthSoamDmCfgEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Delay Measurement based on transmitting 1DM/DMM PDU can be enabled/disabled.
Delay Measurement based on receiving and handling 1DM/DMR PDU is always enabled.
"
::= { tnEthSoamDmCfgEntry 1}
tnEthSoamDmCfgPriority OBJECT-TYPE
SYNTAX IEEE8021PriorityValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The priority to be inserted as PCP bits in TAG (if any).
"
::= { tnEthSoamDmCfgEntry 2}
tnEthSoamDmCfgCast OBJECT-TYPE
SYNTAX INTEGER{
unicast (0),
multicast (1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Selection of 1DM/DMM PDU transmitted unicast or multicast.
The unicast MAC will be configured through 'Peer MEP'.
"
::= { tnEthSoamDmCfgEntry 3}
tnEthSoamDmCfgPeerId OBJECT-TYPE
SYNTAX Dot1agCfmMepId
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Peer MEP ID.
"
::= { tnEthSoamDmCfgEntry 4}
tnEthSoamDmCfgWayType OBJECT-TYPE
SYNTAX INTEGER{
oneway (1),
twoway (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" One-Way: One-Way Delay Measurement implemented on 1DM.
Two-Way: Two-Way Delay Measurement implemented on DMM/DMR.
"
::= { tnEthSoamDmCfgEntry 5}
tnEthSoamDmCfgTxMode OBJECT-TYPE
SYNTAX INTEGER{
standardize (1),
proprietary (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" Standardize: Y.1731 standardize way to transmit 1DM/DMR.
Proprietary: Vitesse proprietary way with follow-up packets to transmit 1DM/DMR.
"
::= { tnEthSoamDmCfgEntry 6}
tnEthSoamDmCfgCalc OBJECT-TYPE
SYNTAX INTEGER{
roundtrip (1),
flow (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" This is only used if the 'Way' is configured to Two-way.
Round trip: The frame dealy calculated by the transmitting and receiving timestamps of initiators.
Frame Delay = RxTimeb-TxTimeStampf
Flow: The frame dealy calculated by the transmitting and receiving timestamps of initiators and remotes.
Frame Delay = (RxTimeb-TxTimeStampf)-(TxTimeStampb-RxTimeStampf).
"
::= { tnEthSoamDmCfgEntry 7}
tnEthSoamDmCfgGap OBJECT-TYPE
SYNTAX Unsigned32(10..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The gap between transmitting 1DM/DMM PDU in 10ms. The range is 10 to 65535.
"
::= { tnEthSoamDmCfgEntry 8}
tnEthSoamDmCfgCount OBJECT-TYPE
SYNTAX INTEGER(10..2000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The number of last records to calculate. The range is 10 to 2000.
"
::= { tnEthSoamDmCfgEntry 9}
tnEthSoamDmCfgUnit OBJECT-TYPE
SYNTAX INTEGER{
ns (1),
us (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The time resolution.
"
::= { tnEthSoamDmCfgEntry 10}
tnEthSoamDmCfgD2forD1 OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" Enable to use DMM/DMR packet to calculate one-way DM. If the option is enabled, the following action will be taken.
When DMR is received, two-way delay (roundtrip or flow) and both near-end-to-far-end and far-end-to-near-end one-way delay are calcualted.
When DMM or 1DM is received, only far-end-to-near-end one-way delay is calculated.
"
::= { tnEthSoamDmCfgEntry 11}
tnEthSoamDmCfgCOAction OBJECT-TYPE
SYNTAX INTEGER{
keep (1),
reset (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The action to counter when overflow happens.
"
::= { tnEthSoamDmCfgEntry 12}
-- ******************************************************************
-- tn SOAM delay measurement status table
-- ******************************************************************
tnEthSoamDmStateTable OBJECT-TYPE
SYNTAX SEQUENCE OF TnEthSoamDmStateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table has entries which generate a configuration for delay measurement state.
"
::= { tnEthSoamDmStateMgmt 1 }
tnEthSoamDmStateEntry OBJECT-TYPE
SYNTAX TnEthSoamDmStateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A entry in the table which generate a configuration for delay measurement state."
INDEX { tnEthSoaminstance }
::= { tnEthSoamDmStateTable 1 }
TnEthSoamDmStateEntry ::=
SEQUENCE {
tnEthSoamDmStateFNTxCount Gauge32,
tnEthSoamDmStateFNRxTimeout Gauge32,
tnEthSoamDmStateFNRxCount Gauge32,
tnEthSoamDmStateFNRxError Gauge32,
tnEthSoamDmStateFNAvgTotal Gauge32,
tnEthSoamDmStateFNAvgLastN Gauge32,
tnEthSoamDmStateFNAvgVarTotal Gauge32,
tnEthSoamDmStateFNAvgVarLastN Gauge32,
tnEthSoamDmStateFNMinValue Gauge32,
tnEthSoamDmStateFNMaxValue Gauge32,
tnEthSoamDmStateFNOverFlow Gauge32,
tnEthSoamDmStateNFTxCount Gauge32,
tnEthSoamDmStateNFRxTimeout Gauge32,
tnEthSoamDmStateNFRxCount Gauge32,
tnEthSoamDmStateNFRxError Gauge32,
tnEthSoamDmStateNFAvgTotal Gauge32,
tnEthSoamDmStateNFAvgLastN Gauge32,
tnEthSoamDmStateNFAvgVarTotal Gauge32,
tnEthSoamDmStateNFAvgVarLastN Gauge32,
tnEthSoamDmStateNFMinValue Gauge32,
tnEthSoamDmStateNFMaxValue Gauge32,
tnEthSoamDmStateNFOverFlow Gauge32,
tnEthSoamDmStateTwoWayTxCount Gauge32,
tnEthSoamDmStateTwoWayRxTimeout Gauge32,
tnEthSoamDmStateTwoWayRxCount Gauge32,
tnEthSoamDmStateTwoWayRxError Gauge32,
tnEthSoamDmStateTwoWayAvgTotal Gauge32,
tnEthSoamDmStateTwoWayAvgLastN Gauge32,
tnEthSoamDmStateTwoWayAvgVarTotal Gauge32,
tnEthSoamDmStateTwoWayAvgVarLastN Gauge32,
tnEthSoamDmStateTwoWayMinValue Gauge32,
tnEthSoamDmStateTwoWayMaxValue Gauge32,
tnEthSoamDmStateTwoWayOverFlow Gauge32,
tnEthSoamDmStateAction TruthValue
}
tnEthSoamDmStateFNTxCount OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The accumulated transmit count - since last 'clear'.
"
::= { tnEthSoamDmStateEntry 1 }
tnEthSoamDmStateFNRxTimeout OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The accumulated receive timeout count for two-way only - since last 'clear'.
"
::= { tnEthSoamDmStateEntry 2 }
tnEthSoamDmStateFNRxCount OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The accumulated receive count - since last 'clear'.
"
::= { tnEthSoamDmStateEntry 3 }
tnEthSoamDmStateFNRxError OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The accumulated receive error count - since last 'clear'. The frame delay is larger than 1 second(timeout).
"
::= { tnEthSoamDmStateEntry 4 }
tnEthSoamDmStateFNAvgTotal OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The average delay - since last 'clear'. The unit is microsecond.
"
::= { tnEthSoamDmStateEntry 5 }
tnEthSoamDmStateFNAvgLastN OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The average delay of the last n packets - since last 'clear'. The unit is microsecond.
"
::= { tnEthSoamDmStateEntry 6 }
tnEthSoamDmStateFNAvgVarTotal OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The average delay variation - since last 'clear'. The unit is microsecond.
"
::= { tnEthSoamDmStateEntry 7 }
tnEthSoamDmStateFNAvgVarLastN OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The average delay variation of the last n packets - since last 'clear'. The unit is microsecond.
"
::= { tnEthSoamDmStateEntry 8 }
tnEthSoamDmStateFNMinValue OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The minimum delay - since last 'clear'. The unit is microsecond.
"
::= { tnEthSoamDmStateEntry 9 }
tnEthSoamDmStateFNMaxValue OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The maximum delay - since last 'clear'. The unit is microsecond.
"
::= { tnEthSoamDmStateEntry 10 }
tnEthSoamDmStateFNOverFlow OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The number of counter overflow - since last 'clear'.
"
::= { tnEthSoamDmStateEntry 11 }
tnEthSoamDmStateNFTxCount OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The accumulated transmit count - since last 'clear'.
"
::= { tnEthSoamDmStateEntry 12 }
tnEthSoamDmStateNFRxTimeout OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The accumulated receive timeout count for two-way only - since last 'clear'.
"
::= { tnEthSoamDmStateEntry 13 }
tnEthSoamDmStateNFRxCount OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The accumulated receive count - since last 'clear'.
"
::= { tnEthSoamDmStateEntry 14 }
tnEthSoamDmStateNFRxError OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The accumulated receive error count - since last 'clear'. The frame delay is larger than 1 second(timeout). "
::= { tnEthSoamDmStateEntry 15 }
tnEthSoamDmStateNFAvgTotal OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The average delay - since last 'clear'. The unit is microsecond. "
::= { tnEthSoamDmStateEntry 16 }
tnEthSoamDmStateNFAvgLastN OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The average delay of the last n packets - since last 'clear'. The unit is microsecond. "
::= { tnEthSoamDmStateEntry 17 }
tnEthSoamDmStateNFAvgVarTotal OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The average delay variation - since last 'clear'. The unit is microsecond. "
::= { tnEthSoamDmStateEntry 18 }
tnEthSoamDmStateNFAvgVarLastN OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The average delay variation of the last n packets - since last 'clear'. The unit is microsecond. "
::= { tnEthSoamDmStateEntry 19 }
tnEthSoamDmStateNFMinValue OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The minimum delay - since last 'clear'. The unit is microsecond. "
::= { tnEthSoamDmStateEntry 20 }
tnEthSoamDmStateNFMaxValue OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The maximum delay - since last 'clear'. The unit is microsecond. "
::= { tnEthSoamDmStateEntry 21 }
tnEthSoamDmStateNFOverFlow OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The number of counter overflow - since last 'clear'. "
::= { tnEthSoamDmStateEntry 22 }
tnEthSoamDmStateTwoWayTxCount OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The accumulated transmit count - since last 'clear'. "
::= { tnEthSoamDmStateEntry 23 }
tnEthSoamDmStateTwoWayRxTimeout OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The accumulated receive timeout count for two-way only - since last 'clear'. "
::= { tnEthSoamDmStateEntry 24 }
tnEthSoamDmStateTwoWayRxCount OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The accumulated receive count - since last 'clear'. "
::= { tnEthSoamDmStateEntry 25 }
tnEthSoamDmStateTwoWayRxError OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The accumulated receive error count - since last 'clear'. The frame delay is larger than 1 second(timeout). "
::= { tnEthSoamDmStateEntry 26 }
tnEthSoamDmStateTwoWayAvgTotal OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The average delay - since last 'clear'. The unit is microsecond. "
::= { tnEthSoamDmStateEntry 27 }
tnEthSoamDmStateTwoWayAvgLastN OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The average delay of the last n packets - since last 'clear'. The unit is microsecond. "
::= { tnEthSoamDmStateEntry 28 }
tnEthSoamDmStateTwoWayAvgVarTotal OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The average delay variation - since last 'clear'. The unit is microsecond. "
::= { tnEthSoamDmStateEntry 29 }
tnEthSoamDmStateTwoWayAvgVarLastN OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The average delay variation of the last n packets - since last 'clear'. The unit is microsecond. "
::= { tnEthSoamDmStateEntry 30 }
tnEthSoamDmStateTwoWayMinValue OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The minimum delay - since last 'clear'. The unit is microsecond. "
::= { tnEthSoamDmStateEntry 31 }
tnEthSoamDmStateTwoWayMaxValue OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The maximum delay - since last 'clear'. The unit is microsecond. "
::= { tnEthSoamDmStateEntry 32 }
tnEthSoamDmStateTwoWayOverFlow OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The number of counter overflow - since last 'clear'. "
::= { tnEthSoamDmStateEntry 33 }
tnEthSoamDmStateAction OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The number of counter overflow - since last 'clear'. "
::= { tnEthSoamDmStateEntry 34 }
END
Reference in New Issue Copy Permalink