mibs/MIBS/transition/TN-IPMC-SNOOPING-MIB

711 lines
28 KiB
Plaintext
Raw Permalink Normal View History

2023-12-05 12:25:34 +01:00
-- *****************************************************************
-- TN-IPMC-SNOOPING-MIB.smi : TN-IPMC-SNOOPING-MIB
--
-- Copyright (c) 2012 by Transition Networks, Inc.
-- All rights reserved.
-- Version 1.00, 2012/10/11, Tonyl
--
-- *****************************************************************
TN-IPMC-SNOOPING-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, Integer32,
Counter32
FROM SNMPv2-SMI
RowStatus, TruthValue
FROM SNMPv2-TC
InetAddress,InetAddressPrefixLength
FROM INET-ADDRESS-MIB
PortList, VlanId
FROM Q-BRIDGE-MIB
InterfaceIndex
FROM IF-MIB
tnProducts FROM TRANSITION-SMI;
tnIpmcSnoopingMib MODULE-IDENTITY
LAST-UPDATED "201207061930Z"
ORGANIZATION "Transition Networks, Inc."
CONTACT-INFO
"Transition Networks
Technical Support
10900 Red Circle Drive
Minnetonka, MN 55343 USA
Tel: +1-800-526-9267
E-mail: techsupport@transition.com"
DESCRIPTION
"The structure of IPMC snooping for
the proprietary enterprise."
::= { tnProducts 115 }
tnIpmcSnoopingMibNotifications OBJECT IDENTIFIER ::= { tnIpmcSnoopingMib 1 }
tnIpmcSnoopingMibObjects OBJECT IDENTIFIER ::= { tnIpmcSnoopingMib 2 }
tnIpmcSnoopingMibConformance OBJECT IDENTIFIER ::= { tnIpmcSnoopingMib 3 }
-- Textual Conventions
TnIpmcType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "A value that represents the protocol type of IPMC:
igmp(1) : type of IPMC is IGMP
mld(2) : type of IPMC is MLD
unknown(0) : type of IPMC is not determined."
SYNTAX INTEGER {
igmp (1),
mld (2),
unknown (4)
}
TnIpmcVersion ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "A value that represents the version of IGMP or MLD:
version1(1) : Version 1 of IGMP or MLD
version2(2) : Version 2 of IGMP or MLD
version2(3) : Version 2 of IGMP
unknown(4) : Version of IGMP or MLD is not determined."
SYNTAX INTEGER {
version1 (1),
version2 (2),
version3 (3),
unknown (4)
}
----------------------------------------------------------------------------
--tnIpmcSnoopingMibObjects
----------------------------------------------------------------------------
tnIpmcSnoopingMgmt OBJECT IDENTIFIER ::= { tnIpmcSnoopingMibObjects 1 }
tnSystemCfgInfo OBJECT IDENTIFIER ::= { tnIpmcSnoopingMgmt 1 }
tnPortCfgInfo OBJECT IDENTIFIER ::= { tnIpmcSnoopingMgmt 2 }
tnVlanCfgInfo OBJECT IDENTIFIER ::= { tnIpmcSnoopingMgmt 3 }
tnPortFilterCfgInfo OBJECT IDENTIFIER ::= { tnIpmcSnoopingMgmt 4 }
tnPortStatusInfo OBJECT IDENTIFIER ::= { tnIpmcSnoopingMgmt 5 }
tnVlanStatisticInfo OBJECT IDENTIFIER ::= { tnIpmcSnoopingMgmt 6 }
tnIpmcGroupInfo OBJECT IDENTIFIER ::= { tnIpmcSnoopingMgmt 7 }
tnIpmcSfmInfo OBJECT IDENTIFIER ::= { tnIpmcSnoopingMgmt 8 }
----------------------------------------------------------------------------
-- tnSystemInfo
----------------------------------------------------------------------------
tnSystemCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF TnSystemCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table contains System based configuration information
for Ipmc Snooping."
::= { tnSystemCfgInfo 1 }
tnSystemCfgEntry OBJECT-TYPE
SYNTAX TnSystemCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry is created for each active port in the device."
INDEX { tnIpmcSnoopingType }
::= { tnSystemCfgTable 1 }
TnSystemCfgEntry ::= SEQUENCE {
tnIpmcSnoopingType TnIpmcType,
tnIpmcSnoopingEnabled TruthValue,
tnIpmcSnoopingFloodingEnabled TruthValue,
tnIpmcSnoopingLeaveProxyEnabled TruthValue,
tnIpmcSnoopingProxyEnabled TruthValue,
tnIpmcSnoopingSsmRange InetAddress,
tnIpmcSnoopingSsmRangePrefix InetAddressPrefixLength,
tnIpmcSnoopingStatisticClear TruthValue
}
tnIpmcSnoopingType OBJECT-TYPE
SYNTAX TnIpmcType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This object indicates whether IGMP or MLD Snooping has been
configued for the system."
::={ tnSystemCfgEntry 1 }
tnIpmcSnoopingEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object indicates whether IGMP or MLD Snooping has been
enabled for the system."
::={ tnSystemCfgEntry 2 }
tnIpmcSnoopingFloodingEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable unregistered IPMCv6 traffic flooding.
The flooding control takes effect only when IGMP or MLD Snooping
is enabled.When Ipmc Snooping is disabled, unregistered
IPMCv4 traffic flooding is always active in spite of this
setting."
::={ tnSystemCfgEntry 3 }
tnIpmcSnoopingLeaveProxyEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable Ipmc Leave proxy. This feature can be used to
avoid forwarding unnecessary leave messages to the
router side."
::={ tnSystemCfgEntry 4 }
tnIpmcSnoopingProxyEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable Ipmc proxy. This feature can be used to avoid
forwarding unnecessary join and leave messages to the
router side."
::={ tnSystemCfgEntry 5 }
tnIpmcSnoopingSsmRange OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SSM (Source-Specific Multicast) Range allows the SSM-aware
hosts and routers run the SSM service model for the groups
in the address range."
::={ tnSystemCfgEntry 6 }
tnIpmcSnoopingSsmRangePrefix OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Denotes the length of a generic Internet network address
prefix."
::={ tnSystemCfgEntry 7 }
tnIpmcSnoopingStatisticClear OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Clears all Statistics counters."
::={ tnSystemCfgEntry 8 }
----------------------------------------------------------------------
-- tnPortConfigInfo
----------------------------------------------------------------------
tnPortCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF TnPortCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table contains Port based configuration information
for Ipmc Snooping."
::= { tnPortCfgInfo 1 }
tnPortCfgEntry OBJECT-TYPE
SYNTAX TnPortCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry is created for each active port in the device."
INDEX { tnIpmcSnoopingType, ifIndex }
::= { tnPortCfgTable 1 }
TnPortCfgEntry ::= SEQUENCE {
tnPortRoutePortEnabled TruthValue,
tnPortFastLeaveEnabled TruthValue,
tnPortThrottling Unsigned32
}
tnPortRoutePortEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify which ports act as router ports. A router port
is a port on the Ethernet switch that leads towards the
Layer 3 multicast device or Ipmc querier. If an aggregation
member port is selected as a router port, the whole
aggregation will act as a router port."
::= { tnPortCfgEntry 1 }
tnPortFastLeaveEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable the fast leave on the port."
::= { tnPortCfgEntry 2 }
tnPortThrottling OBJECT-TYPE
SYNTAX Unsigned32 (0..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable to limit the number of multicast groups to which a
switch port can belong. The range is 1-10 for S3280.
0 means disabled."
::= { tnPortCfgEntry 3 }
----------------------------------------------------------------------------
-- tnVlanConfigInfo
----------------------------------------------------------------------------
tnVlanCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF TnVlanCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table contains VLAN based configuration information
for Ipmc Snooping."
::= { tnVlanCfgInfo 1 }
tnVlanCfgEntry OBJECT-TYPE
SYNTAX TnVlanCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry is created for each active VLAN in the device"
INDEX { tnIpmcSnoopingType, tnVlanIndex }
::= { tnVlanCfgTable 1 }
TnVlanCfgEntry ::= SEQUENCE {
tnVlanIndex VlanId,
tnVlanIpmcSnoopingEnabled TruthValue,
tnVlanIpmcQuerierEnabled TruthValue,
tnVlanIpmcCompatibility INTEGER,
tnVlanIpmcSnoopingRV Unsigned32,
tnVlanIpmcSnoopingQI Unsigned32,
tnVlanIpmcSnoopingQRI Unsigned32,
tnVlanIpmcSnoopingLLQI Unsigned32,
tnVlanIpmcSnoopingURI Unsigned32,
tnVlanIpmcRowStatus RowStatus
}
tnVlanIndex OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This object indicates the VLAN in which Ipmc Snooping is
configured."
::= { tnVlanCfgEntry 1 }
tnVlanIpmcSnoopingEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION "When this object is set to 'true' Ipmc Snooping
is enabled on this VLAN else disabled."
::= { tnVlanCfgEntry 2 }
tnVlanIpmcQuerierEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION "When this object is set to 'true' Ipmc Snooping
is enabled on this VLAN else disabled."
::= { tnVlanCfgEntry 3 }
tnVlanIpmcCompatibility OBJECT-TYPE
SYNTAX INTEGER {
ipmc-auto (0),
ipmc-v1 (1),
ipmc-v2 (2),
ipmc-v3 (3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Compatibility is maintained by hosts and routers taking
appropriate actions depending on the versions of IGMP or MLD operating
on hosts and routers within a network. The allowed selection
is IGMP or MLD-Auto, Forced IGMPv1 or MLDv1, Forced IGMPv2 or MLDv2,
Forced IGMPv3,default compatibility value is IGMP or MLD-Auto."
::= { tnVlanCfgEntry 4 }
tnVlanIpmcSnoopingRV OBJECT-TYPE
SYNTAX Unsigned32 (1..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Robustness Variable. The Robustness Variable allows tuning
for the expected packet loss on a network.
The allowed range is 1 to 255,default robustness variable
value is 2."
DEFVAL { 2 }
::= { tnVlanCfgEntry 5 }
tnVlanIpmcSnoopingQI OBJECT-TYPE
SYNTAX Unsigned32 (1..31744)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Query Interval. The Query Interval is the interval between
General Queries sent by the Querier. The allowed range is
1 to 31744 seconds,default query interval is 125 seconds."
DEFVAL { 125 }
::= { tnVlanCfgEntry 6 }
tnVlanIpmcSnoopingQRI OBJECT-TYPE
SYNTAX Unsigned32 (0..31744)
UNITS "deciseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Query Response Interval. The Maximum Response Delay used to calculate
the Maximum Response Code inserted into the periodic General Queries.
The allowed range is 0 to 31744 in tenths of seconds, default query
response interval is 100 in tenths of seconds (10 seconds)."
DEFVAL { 100 }
::= { tnVlanCfgEntry 7 }
tnVlanIpmcSnoopingLLQI OBJECT-TYPE
SYNTAX Unsigned32 (0..31744)
UNITS "deciseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Last Member Query Interval. The Last Member Query Time is the time value
represented by the Last Member Query Interval, multiplied by the Last Member
Query Count. The allowed range is 0 to 31744 in tenths of seconds, default
last member query interval is 10 in tenths of seconds (1 second)."
DEFVAL { 10 }
::= { tnVlanCfgEntry 8 }
tnVlanIpmcSnoopingURI OBJECT-TYPE
SYNTAX Unsigned32 (0..31744)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Unsolicited Report Interval. The Unsolicited Report Interval is the time
between repetitions of a host's initial report of membership in a group.
The allowed range is 0 to 31744 seconds, default unsolicited report interval
is 1 second. "
DEFVAL { 1 }
::= { tnVlanCfgEntry 9 }
tnVlanIpmcRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "This object indicates RowStatus "
::= { tnVlanCfgEntry 10 }
------------------------------------------------------------------------------
-- tnPortFilterCfgInfo
------------------------------------------------------------------------------
tnPortFilterCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF TnPortFilterCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table contains VLAN based configuration information
for IGMP or MLD Snooping."
::= { tnPortFilterCfgInfo 1 }
tnPortFilterCfgEntry OBJECT-TYPE
SYNTAX TnPortFilterCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry is created for each active VLAN in the device"
INDEX { tnIpmcSnoopingType, tnPortFilterIfIndex, tnPortFilterIpmcIp }
::= { tnPortFilterCfgTable 1 }
TnPortFilterCfgEntry ::= SEQUENCE {
tnPortFilterIfIndex Unsigned32,
tnPortFilterIpmcIp InetAddress,
tnPortFilterRowStatus RowStatus
}
tnPortFilterIfIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This object indicates the Port in which IGMP or MLD Snooping is
configured."
::= { tnPortFilterCfgEntry 1 }
tnPortFilterIpmcIp OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This object indicates the IP group in which IGMP or MLD Snooping is
configured."
::= { tnPortFilterCfgEntry 2 }
tnPortFilterRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "This object indicates RowStatus."
::= { tnPortFilterCfgEntry 3 }
-------------------------------------------------------------------------------
-- tnPortStatusInfo
-------------------------------------------------------------------------------
tnPortStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF TnPortStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table contains Port based configuration information
for IGMP or MLD Snooping."
::= { tnPortStatusInfo 1 }
tnPortStatusEntry OBJECT-TYPE
SYNTAX TnPortStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry is created for each active port in the device"
INDEX { tnIpmcSnoopingType, ifIndex }
::= { tnPortStatusTable 1 }
TnPortStatusEntry ::= SEQUENCE {
tnPortStatusRouteEnabled TruthValue
}
tnPortStatusRouteEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Display which ports act as router ports. A router port is
a port on the Ethernet switch that leads towards the Layer 3
multicast device or IGMP or MLD querier. Static denotes the specific
port is configured to be a router port. Dynamic denotes the
specific port is learned to be a router port."
::= { tnPortStatusEntry 1 }
----------------------------------------------------------------------------
--tnVlanStatisticInfo
----------------------------------------------------------------------------
tnVlanStatisticTable OBJECT-TYPE
SYNTAX SEQUENCE OF TnVlanStatisticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This contains information about the Ipmc snooping VLAN
statistic counter info table."
::= { tnVlanStatisticInfo 1 }
tnVlanStatisticEntry OBJECT-TYPE
SYNTAX TnVlanStatisticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This is an entry of the tnVlanStatisticTable."
INDEX { tnIpmcSnoopingType, tnVlanStatisticVlanID }
::= { tnVlanStatisticTable 1 }
TnVlanStatisticEntry ::= SEQUENCE {
tnVlanStatisticVlanID VlanId,
tnVlanStatisticQuerierVersion TnIpmcVersion,
tnVlanStatisticHostVersion TnIpmcVersion,
tnVlanStatisticQuerierState INTEGER,
tnVlanStatisticQuerierTx Counter32,
tnVlanStatisticQuerierRx Counter32,
tnVlanStatisticV1ReportsRx Counter32,
tnVlanStatisticV2ReportsRx Counter32,
tnVlanStatisticV3ReportsRx Counter32,
tnVlanStatisticLeavesRx Counter32
}
tnVlanStatisticVlanID OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This indicates the VLAN ID of the entry."
::= { tnVlanStatisticEntry 1 }
tnVlanStatisticQuerierVersion OBJECT-TYPE
SYNTAX TnIpmcVersion
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This indicates working querier version currently
in this VLAN."
::= { tnVlanStatisticEntry 2 }
tnVlanStatisticHostVersion OBJECT-TYPE
SYNTAX TnIpmcVersion
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This indicates working host version currently
in this VLAN."
::= { tnVlanStatisticEntry 3 }
tnVlanStatisticQuerierState OBJECT-TYPE
SYNTAX INTEGER {
disabled (0),
active (1),
idle (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This indicates the querier status is 'ACTIVE' or 'IDLE'.
'DISABLED' denotes the specific interface is
administratively disabled."
::= { tnVlanStatisticEntry 4 }
tnVlanStatisticQuerierTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This indicates the count of transmitted IPMC Query
packets in this VLAN."
::= { tnVlanStatisticEntry 5 }
tnVlanStatisticQuerierRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This indicates the count of transmitted IPMC Query
packets in this VLAN."
::= { tnVlanStatisticEntry 6 }
tnVlanStatisticV1ReportsRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This indicates the count of received IGMPv1 or MLDv1 Query
packets in this VLAN."
::= { tnVlanStatisticEntry 7 }
tnVlanStatisticV2ReportsRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This indicates the count of received IGMPv2 or MLDv2 Query
packets in this VLAN."
::= { tnVlanStatisticEntry 8 }
tnVlanStatisticV3ReportsRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This indicates the count of received IGMPv3 Query
packets in this VLAN."
::= { tnVlanStatisticEntry 9 }
tnVlanStatisticLeavesRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This indicates the count of received IPMC(IGMPv2 or MLDv1) Leaves
packets in this VLAN."
::= { tnVlanStatisticEntry 10 }
----------------------------------------------------------------------------
-- tnIpmcGroupInfo
----------------------------------------------------------------------------
tnIpmcGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF TnIpmcGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table containing multicast group address information for
IGMP or MLD Snooping."
::= { tnIpmcGroupInfo 1 }
tnIpmcGroupEntry OBJECT-TYPE
SYNTAX TnIpmcGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry is created by IGMP or MLD Snooping for each group learned
in the VLAN."
INDEX { tnIpmcSnoopingType, tnIpmcGroupVlanIndex, tnIpmcGroupAddress }
::= { tnIpmcGroupTable 1 }
TnIpmcGroupEntry ::= SEQUENCE {
tnIpmcGroupVlanIndex VlanId,
tnIpmcGroupAddress InetAddress,
tnIpmcGroupPortList PortList
}
tnIpmcGroupVlanIndex OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This object indicates the VLAN in which the group is learned."
::= { tnIpmcGroupEntry 1 }
tnIpmcGroupAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This object indicates IP multicast address learned by IGMP or MLD Snooping."
::= { tnIpmcGroupEntry 2 }
tnIpmcGroupPortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object indicates the set of ports on which IPMC Membership Reports
are received for the group indicating interest to receive traffic sent
to the group."
::= { tnIpmcGroupEntry 3 }
------------------------------------------------------------------------------
-- tnIpmcSfmInfo
------------------------------------------------------------------------------
tnIpmcSfmTable OBJECT-TYPE
SYNTAX SEQUENCE OF TnIpmcSfmEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table containing multicast group address information for
IGMP or MLD Snooping."
::= { tnIpmcSfmInfo 1 }
tnIpmcSfmEntry OBJECT-TYPE
SYNTAX TnIpmcSfmEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry is created by IPMC Snooping for each group learned in the VLAN."
INDEX { tnIpmcSnoopingType, tnIpmcSfmVlanIndex, tnIpmcSfmInetAddress,tnIpmcSfmPort, tnIpmcSfmSrcAddress }
::= { tnIpmcSfmTable 1 }
TnIpmcSfmEntry ::= SEQUENCE {
tnIpmcSfmVlanIndex VlanId,
tnIpmcSfmInetAddress InetAddress,
tnIpmcSfmPort InterfaceIndex,
tnIpmcSfmSrcAddress InetAddress,
tnIpmcSfmMode INTEGER,
tnIpmcSfmSrcType INTEGER,
tnIpmcSfmHardFilter TruthValue
}
tnIpmcSfmVlanIndex OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This object indicates the VLAN in which the group is learned."
::= { tnIpmcSfmEntry 1 }
tnIpmcSfmInetAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This object indicates IP multicast address learned by IPMC Snooping."
::= { tnIpmcSfmEntry 2 }
tnIpmcSfmPort OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This object indicates the switch port number."
::= { tnIpmcSfmEntry 3 }
tnIpmcSfmSrcAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This object indicates IP Address of the source. Currently,
system limits the total number of IP source addresses for
filtering to be 128."
::= { tnIpmcSfmEntry 4 }
tnIpmcSfmMode OBJECT-TYPE
SYNTAX INTEGER {
include (1),
exclude (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object indicates the filtering mode maintained per
(VLAN ID, port number, Group Address) basis. It can be
either Include or Exclude."
::= { tnIpmcSfmEntry 5 }
tnIpmcSfmSrcType OBJECT-TYPE
SYNTAX INTEGER {
allow (1),
deny (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object indicates the Type. It can be either Allow or Deny."
::= { tnIpmcSfmEntry 6 }
tnIpmcSfmHardFilter OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object indicates Indicates whether data plane destined to the specific
group address from the source IP address could be handled by chip or not."
::= { tnIpmcSfmEntry 7 }
END