david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
main
mibs/MIBS/transition/TN-LLDP-MIB

2143 lines
82 KiB
Plaintext
Raw Permalink Normal View History

Initial commit
2023-12-05 12:25:34 +01:00
-- *****************************************************************
-- TN-LLDP-MIB.mib : TN LLPD private MIB
--
-- Copyright (c) 2015 by Transition Networks, Inc.
-- All rights reserved.
--
-- *****************************************************************
TN-LLDP-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
MODULE-IDENTITY, OBJECT-TYPE
FROM SNMPv2-SMI
TEXTUAL-CONVENTION
FROM SNMPv2-TC
tnProducts
FROM TRANSITION-SMI
Integer32 FROM SNMPv2-SMI
Unsigned32 FROM SNMPv2-SMI
TruthValue FROM SNMPv2-TC
TNDisplayString FROM TN-TC
TNInteger64 FROM TN-TC
TNInterfaceIndex FROM TN-TC
TNRowEditorState FROM TN-TC
TNUnsigned16 FROM TN-TC
TNUnsigned64 FROM TN-TC
TNUnsigned8 FROM TN-TC
;
tnLldpMib MODULE-IDENTITY
LAST-UPDATED "201506080000Z"
ORGANIZATION "Transition Networks, Inc."
CONTACT-INFO
"Transition Networks
Technical Support
10900 Red Circle Drive
Minnetonka, MN 55343 USA
Tel: +1-800-526-9267
E-mail: techsupport@transition.com"
DESCRIPTION
"This is a private version of the LLDP MIB"
REVISION "201506080000Z"
DESCRIPTION
"Initial version"
::= { tnProducts 151 }
TNlldpAdminState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This enumerations the admin state."
SYNTAX INTEGER { disabled(0), txAndRx(1), txOnly(2), rxOnly(3) }
TNlldpmedAltitudeType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This enumerations the altitude type."
SYNTAX INTEGER { meters(1), floors(2) }
TNlldpmedCivicAddressType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This enumerations the civic address type."
SYNTAX INTEGER { state(1), county(2), city(3), district(4), block(5), street(6), leadingStreetDirection(16), trailingStreetSuffix(17), streetSuffix(18), houseNo(19), houseNoSuffix(20), landmark(21), additionalInformation(22), name(23), zipCode(24), building(25), apartment(26), floor(27), roomNumber(28), placeType(29), postalCommunityName(30), poBox(31), additionalCode(32) }
TNlldpmedDatumType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This enumerations the datum (geodetic system)."
SYNTAX INTEGER { wgs84(1), nad83navd88(2), nad83mllw(3) }
TNlldpmedDeviceType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This enumerations the device type that the device shall operate as."
SYNTAX INTEGER { connectivity(0), endpoint(1) }
TNlldpmedRemoteDeviceType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This enumerations the remote neighbor's device type."
SYNTAX INTEGER { notDefined(0), endpointClassI(1), endpointClassII(2), endpointClassIII(3), networkConnectivity(4), reserved(5) }
TNlldpmedRemoteNetworkPolicyApplicationType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This enumerations the remote neighbor's network policy's application
type."
SYNTAX INTEGER { voice(1), voiceSignaling(2), guestVoice(3), guestVoiceSignaling(4), softphoneVoice(5), videoConferencing(6), streamingVideo(7), videoSignaling(8) }
tnLldpMibObjects OBJECT IDENTIFIER
::= { tnLldpMib 1 }
tnLldpConfig OBJECT IDENTIFIER
::= { tnLldpMibObjects 2 }
tnLldpConfigGlobal OBJECT IDENTIFIER
::= { tnLldpConfig 1 }
tnLldpConfigGlobalReInitDelay OBJECT-TYPE
SYNTAX TNUnsigned16
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the LLDP tx reinitialization delay in seconds. Valid range 1-10.
When a port is disabled, LLDP is disabled or the switch is rebooted, a
LLDP shutdown frame is transmitted to the neighboring units, signaling
that the LLDP information isn't valid anymore.
Tx reinitialization delay controls the amount of seconds between the
shutdown frame and a new LLDP initialization.
Note: Must be less than 0.25 times the Tx interval."
::= { tnLldpConfigGlobal 1 }
tnLldpConfigGlobalMsgTxHold OBJECT-TYPE
SYNTAX TNUnsigned16
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the LLDP tx hold times . Valid range 2-10.
Each LLDP frame contains information about how long time the
information in the LLDP frame shall be considered valid. The LLDP
information valid period is set to tx hold times multiplied by tx
interval seconds."
::= { tnLldpConfigGlobal 2 }
tnLldpConfigGlobalMsgTxInterval OBJECT-TYPE
SYNTAX TNUnsigned16
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the LLDP tx interval in seconds.
The switch periodically transmits LLDP frames to its neighbors for
having the network discovery information up-to-date. The interval
between each LLDP frame is determined by the tx Interval value.
Valid range 5-32768 seconds."
::= { tnLldpConfigGlobal 3 }
tnLldpConfigGlobalTxDelay OBJECT-TYPE
SYNTAX TNUnsigned16
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the LLDP tx delay in seconds. Valid range 1-8192.
If some configuration is changed (e.g. the IP address) a new LLDP frame
is transmitted, but the time between the LLDP frames will always be at
least the value of tx delay seconds.
Note: tx Delay cannot be larger than 1/4 of the tx interval."
::= { tnLldpConfigGlobal 4 }
tnLldpConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF TNLldpConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is a table to configure LLDP configurations for a specific
interface."
::= { tnLldpConfig 2 }
tnLldpConfigEntry OBJECT-TYPE
SYNTAX TNLldpConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each interface has a set of control parameters"
INDEX { tnLldpConfigIfIndex }
::= { tnLldpConfigTable 1 }
TNLldpConfigEntry ::= SEQUENCE {
tnLldpConfigIfIndex TNInterfaceIndex,
tnLldpConfigAdminState TNlldpAdminState,
tnLldpConfigCdpAware TruthValue,
tnLldpConfigOptionalTlvs TNUnsigned8
}
tnLldpConfigIfIndex OBJECT-TYPE
SYNTAX TNInterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Logical interface number index."
::= { tnLldpConfigEntry 1 }
tnLldpConfigAdminState OBJECT-TYPE
SYNTAX TNlldpAdminState
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the LLDP admin state for the interface."
::= { tnLldpConfigEntry 3 }
tnLldpConfigCdpAware OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables/disables CDP awareness for the interface.
CDP is Cisco's equivalent to LLDP.
The CDP operation is restricted to decoding incoming CDP frames (The
switch doesn't transmit CDP frames). CDP frames are only decoded if
LLDP on the port is enabled.
Only CDP TLVs that can be mapped to a corresponding field in the LLDP
neighbors' table are decoded. All other TLVs are discarded
(Unrecognized CDP TLVs and discarded CDP frames are not shown in the
LLDP statistics.).
CDP TLVs are mapped onto LLDP neighbors' table as shown below.
CDP TLV 'Device ID' is mapped to the LLDP 'Chassis ID' field.
CDP TLV 'Address' is mapped to the LLDP 'Management Address' field. The
CDP address TLV can contain multiple addresses, but only the first
address is shown in the LLDP neighbors table.
CDP TLV 'Port ID' is mapped to the LLDP 'Port ID' field.
CDP TLV 'Version and Platform' is mapped to the LLDP 'System
Description' field.
Both the CDP and LLDP support 'system capabilities', but the CDP
capabilities cover capabilities that are not part of the LLDP. These
capabilities are shown as 'others' in the LLDP neighbors' table.
If all ports have CDP awareness disabled the switch forwards CDP frames
received from neighbor devices. If at least one port has CDP awareness
enabled all CDP frames are terminated by the switch.
Note: When CDP awareness on a port is disabled the CDP information
isn't removed immediately, but gets removed when the hold time is
exceeded."
::= { tnLldpConfigEntry 4 }
tnLldpConfigOptionalTlvs OBJECT-TYPE
SYNTAX TNUnsigned8
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables/Disables the LLDP optional TLVs. Bit mask, where setting the
bit to 1 means enable transmission of the corresponding TLV.
Bit 0 represents Port Description TLV.
Bit 1 represents System Name TLV.
Bit 2 represents System Description.
Bit 3 represents System Capabilities TLV.
Bit 4 represents Management Address TLV."
::= { tnLldpConfigEntry 5 }
tnLldpConfigMed OBJECT IDENTIFIER
::= { tnLldpConfig 3 }
tnLldpConfigMedTable OBJECT-TYPE
SYNTAX SEQUENCE OF TNLldpConfigMedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is a table to configure LLDP MEDIA configurations for a specific
interface."
::= { tnLldpConfigMed 1 }
tnLldpConfigMedEntry OBJECT-TYPE
SYNTAX TNLldpConfigMedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each interface has a set of control parameters"
INDEX { tnLldpConfigMedIfIndex }
::= { tnLldpConfigMedTable 1 }
TNLldpConfigMedEntry ::= SEQUENCE {
tnLldpConfigMedIfIndex TNInterfaceIndex,
tnLldpConfigMedOptionalTlvs TNUnsigned8,
tnLldpConfigMedDeviceType TNlldpmedDeviceType
}
tnLldpConfigMedIfIndex OBJECT-TYPE
SYNTAX TNInterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Logical interface number index."
::= { tnLldpConfigMedEntry 1 }
tnLldpConfigMedOptionalTlvs OBJECT-TYPE
SYNTAX TNUnsigned8
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables/Disables the LLDP optional TLVs. Bit mask, where setting the
bit to 1 means
enable transmission of the corresponding optional TLV.
Bit 0 represents the capabilities TLV.
Bit 1 represents the network Policy TLV.
Bit 2 represents the location TLV.
Bit 3 represents the PoE TLV."
::= { tnLldpConfigMedEntry 3 }
tnLldpConfigMedDeviceType OBJECT-TYPE
SYNTAX TNlldpmedDeviceType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting device type to configure the mode the device shall operate as."
::= { tnLldpConfigMedEntry 4 }
tnLldpConfigMedPolicyTable OBJECT-TYPE
SYNTAX SEQUENCE OF TNLldpConfigMedPolicyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is a table to configure LLDP MED Policies for the device."
::= { tnLldpConfigMed 2 }
tnLldpConfigMedPolicyEntry OBJECT-TYPE
SYNTAX TNLldpConfigMedPolicyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Network Policy Discovery enables the efficient discovery and diagnosis
of mismatch issues with the VLAN configuration, along with the
associated Layer 2 and Layer 3 attributes, which apply for a set of
specific protocol applications on that port. Improper network policy
configurations are a very significant issue in VoIP environments that
frequently result in voice quality degradation or loss of service.
Policies are only intended for use with applications that have specific
'real-time' network policy requirements, such as interactive voice
and/or video services."
INDEX { tnLldpConfigMedPolicyLldpmedPolicy }
::= { tnLldpConfigMedPolicyTable 1 }
TNLldpConfigMedPolicyEntry ::= SEQUENCE {
tnLldpConfigMedPolicyLldpmedPolicy Integer32,
tnLldpConfigMedPolicyApplicationType TNlldpmedRemoteNetworkPolicyApplicationType,
tnLldpConfigMedPolicyTagged TruthValue,
tnLldpConfigMedPolicyVlanId TNUnsigned16,
tnLldpConfigMedPolicyL2Priority TNUnsigned8,
tnLldpConfigMedPolicyDscp TNUnsigned8,
tnLldpConfigMedPolicyAction TNRowEditorState
}
tnLldpConfigMedPolicyLldpmedPolicy OBJECT-TYPE
SYNTAX Integer32 (0..31)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Policy index."
::= { tnLldpConfigMedPolicyEntry 1 }
tnLldpConfigMedPolicyApplicationType OBJECT-TYPE
SYNTAX TNlldpmedRemoteNetworkPolicyApplicationType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The LLDP policy application type."
::= { tnLldpConfigMedPolicyEntry 3 }
tnLldpConfigMedPolicyTagged OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The LLDP policy tagged flag. Defines if LLDP policy uses tagged VLAN."
::= { tnLldpConfigMedPolicyEntry 4 }
tnLldpConfigMedPolicyVlanId OBJECT-TYPE
SYNTAX TNUnsigned16 (1..4095)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The LLDP policy VLAN ID. Only valid when policy 'Tagged' is TRUE"
::= { tnLldpConfigMedPolicyEntry 5 }
tnLldpConfigMedPolicyL2Priority OBJECT-TYPE
SYNTAX TNUnsigned8 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The LLDP policy L2 priority."
::= { tnLldpConfigMedPolicyEntry 6 }
tnLldpConfigMedPolicyDscp OBJECT-TYPE
SYNTAX TNUnsigned8 (0..63)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The LLDP policy DSCP."
::= { tnLldpConfigMedPolicyEntry 7 }
tnLldpConfigMedPolicyAction OBJECT-TYPE
SYNTAX TNRowEditorState
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Action"
::= { tnLldpConfigMedPolicyEntry 100 }
tnLldpConfigMedPolicyListTable OBJECT-TYPE
SYNTAX SEQUENCE OF TNLldpConfigMedPolicyListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each interface can be mapped to multiple policies. Set to TRUE in order
to enable the corresponding policy to be transmitted at the interface.
It is a requirement that the policy is defined."
::= { tnLldpConfigMed 3 }
tnLldpConfigMedPolicyListEntry OBJECT-TYPE
SYNTAX TNLldpConfigMedPolicyListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each location information has a control parameter"
INDEX { tnLldpConfigMedPolicyListIfIndex, tnLldpConfigMedPolicyListLldpmedPolicy }
::= { tnLldpConfigMedPolicyListTable 1 }
TNLldpConfigMedPolicyListEntry ::= SEQUENCE {
tnLldpConfigMedPolicyListIfIndex TNInterfaceIndex,
tnLldpConfigMedPolicyListLldpmedPolicy Integer32,
tnLldpConfigMedPolicyListLldpmedPoliciesList TruthValue
}
tnLldpConfigMedPolicyListIfIndex OBJECT-TYPE
SYNTAX TNInterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Logical interface number index."
::= { tnLldpConfigMedPolicyListEntry 1 }
tnLldpConfigMedPolicyListLldpmedPolicy OBJECT-TYPE
SYNTAX Integer32 (0..31)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Policy index."
::= { tnLldpConfigMedPolicyListEntry 3 }
tnLldpConfigMedPolicyListLldpmedPoliciesList OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set to TRUE assign the corresponding policy index to the interface."
::= { tnLldpConfigMedPolicyListEntry 4 }
tnLldpConfigMedGlobal OBJECT IDENTIFIER
::= { tnLldpConfigMed 4 }
tnLldpConfigMedGlobalFastRepeatCount OBJECT-TYPE
SYNTAX TNUnsigned8 (1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of times to repeat LLDP frame transmission at fast start
Rapid startup and Emergency Call Service Location Identification
Discovery of endpoints is a critically important aspect of VoIP systems
in general. In addition, it is best to advertise only those pieces of
information which are specifically relevant to particular endpoint
types (for example only advertise the voice network policy to permitted
voice-capable devices), both in order to conserve the limited LLDPU
space and to reduce security and system integrity issues that can come
with inappropriate knowledge of the network policy.
With this in mind LLDP-MED defines an LLDP-MED Fast Start interaction
between the protocol and the application layers on top of the protocol,
in order to achieve these related properties. Initially, a Network
Connectivity Device will only transmit LLDP TLVs in an LLDPDU. Only
after an LLDP-MED Endpoint Device is detected, will an LLDP-MED capable
Network Connectivity Device start to advertise LLDP-MED TLVs in
outgoing LLDPDUs on the associated port. The LLDP-MED application will
temporarily speed up the transmission of the LLDPDU to start within a
second, when a new LLDP-MED neighbor has been detected in order share
LLDP-MED information as fast as possible to new neighbors.
Because there is a risk of an LLDP frame being lost during transmission
between neighbors, it is recommended to repeat the fast start
transmission multiple times to increase the possibility of the
neighbors receiving the LLDP frame. With fast start repeat count it is
possible to specify the number of times the fast start transmission
would be repeated. The recommended value is 4 times, given that 4 LLDP
frames with a 1 second interval will be transmitted, when an LLDP frame
with new information is received.
It should be noted that LLDP-MED and the LLDP-MED Fast Start mechanism
is only intended to run on links between LLDP-MED Network Connectivity
Devices and Endpoint Devices, and as such does not apply to links
between LAN infrastructure elements, including Network Connectivity
Devices, or other types of links."
::= { tnLldpConfigMedGlobal 1 }
tnLldpConfigMedGlobalLatitude OBJECT-TYPE
SYNTAX TNInteger64
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Latitude degrees in 2s-complement as specified in RFC 3825. Positive
numbers are north of the equator and negative numbers are south of the
equator."
::= { tnLldpConfigMedGlobal 2 }
tnLldpConfigMedGlobalLongitude OBJECT-TYPE
SYNTAX TNInteger64
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Longitude degrees in 2s-complement as specified in RFC 3825. Positive
values are East of the prime meridian and negative numbers are West of
the prime meridian."
::= { tnLldpConfigMedGlobal 3 }
tnLldpConfigMedGlobalAltitudeType OBJECT-TYPE
SYNTAX TNlldpmedAltitudeType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting altitude type
Possible to select between two altitude types (floors or meters).
Meters are representing meters of altitude defined by the vertical
datum specified. Floors are representing altitude in a form more
relevant in buildings which have different floor-to-floor dimensions.
An altitude = 0.0 is meaningful even outside a building, and represents
ground level at the given latitude and longitude. Inside a building,
0.0 represents the floor level associated with ground level at the main
entrance."
::= { tnLldpConfigMedGlobal 4 }
tnLldpConfigMedGlobalAltitude OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Altitude value in 2s-complement as specified in RFC 3825"
::= { tnLldpConfigMedGlobal 5 }
tnLldpConfigMedGlobalElinAddr OBJECT-TYPE
SYNTAX TNDisplayString (SIZE(0..25))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Emergency Call Service ELIN identifier data format is defined to carry
the ELIN identifier as used during emergency call setup to a
traditional CAMA or ISDN trunk-based PSAP. This format consists of a
numerical digit string, corresponding to the ELIN to be used for
emergency calling. Maximum number of octets are 25."
::= { tnLldpConfigMedGlobal 6 }
tnLldpConfigMedGlobalDatum OBJECT-TYPE
SYNTAX TNlldpmedDatumType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting datum to configure the datum (geodetic system) to use.
The Map Datum is used for the coordinates given in these options:
WGS84: (Geographical 3D) - World Geodesic System 1984, CRS Code 4327,
Prime Meridian Name: Greenwich.
NAD83/NAVD88: North American Datum 1983, CRS Code 4269, Prime Meridian
Name: Greenwich;The associated vertical datum is the North American
Vertical Datum of 1988 (NAVD88).This datum pair is to be used when
referencing locations on land, not near tidal water(which would use
Datum = NAD83/MLLW).
NAD83/MLLW: North American Datum 1983, CRS Code 4269, Prime Meridian
Name: Greenwich; The associated vertical datum is Mean Lower Low Water
(MLLW). This datum pair is to be used when referencing locations on
water/sea/ocean."
::= { tnLldpConfigMedGlobal 7 }
tnLldpConfigMedGlobalCountryCode OBJECT-TYPE
SYNTAX TNDisplayString (SIZE(0..2))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The two-letter ISO 3166 country code in capital ASCII letters -
Example: DK, DE or US."
::= { tnLldpConfigMedGlobal 8 }
tnLldpConfigMedLocationInformationTable OBJECT-TYPE
SYNTAX SEQUENCE OF TNLldpConfigMedLocationInformationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The civic address location information. Each civic address can contain
up to 250 characters, but the total amount of characters for the
combined civic address locations must not exceed 250 bytes. Note: If an
civic address location is non-empty it uses the amount of characters
plus addition two characters. This is described in TIA1057, Section
10.2.4.3.2."
::= { tnLldpConfigMed 5 }
tnLldpConfigMedLocationInformationEntry OBJECT-TYPE
SYNTAX TNLldpConfigMedLocationInformationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each civic address type as defined in TIA1057, Section 3.4 in Annex B"
INDEX { tnLldpConfigMedLocationInformationLldpmedIndex }
::= { tnLldpConfigMedLocationInformationTable 1 }
TNLldpConfigMedLocationInformationEntry ::= SEQUENCE {
tnLldpConfigMedLocationInformationLldpmedIndex TNlldpmedCivicAddressType,
tnLldpConfigMedLocationInformationCivicAddress TNDisplayString
}
tnLldpConfigMedLocationInformationLldpmedIndex OBJECT-TYPE
SYNTAX TNlldpmedCivicAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Civic address type.
1 - State/National subdivisions
2 - County, parish, gun (JP), district (IN)
3 - City, township
4 - City division, borough, city district, ward, chou (JP)
5 - Neighborhood, block
6 - Street
16 - Leading street direction
17 - Trailing street direction
18 - Street suffix
19 - House number
20 - House number suffix
21 - Landmark or vanity address
22 - Additional location information
23 - Name
24 - Postal/zip code
25 - Building
26 - Unit
27 - Floor
28 - Room
29 - Place type
30 - Postal
31 - Post office
32 - Additional code"
::= { tnLldpConfigMedLocationInformationEntry 2 }
tnLldpConfigMedLocationInformationCivicAddress OBJECT-TYPE
SYNTAX TNDisplayString (SIZE(0..250))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Civic address"
::= { tnLldpConfigMedLocationInformationEntry 3 }
tnLldpConfigMedPolicyRowEditor OBJECT IDENTIFIER
::= { tnLldpConfigMed 6 }
tnLldpConfigMedPolicyRowEditorLldpmedPolicy OBJECT-TYPE
SYNTAX Integer32 (0..31)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Policy index."
::= { tnLldpConfigMedPolicyRowEditor 1 }
tnLldpConfigMedPolicyRowEditorApplicationType OBJECT-TYPE
SYNTAX TNlldpmedRemoteNetworkPolicyApplicationType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The LLDP policy application type."
::= { tnLldpConfigMedPolicyRowEditor 3 }
tnLldpConfigMedPolicyRowEditorTagged OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The LLDP policy tagged flag. Defines if LLDP policy uses tagged VLAN."
::= { tnLldpConfigMedPolicyRowEditor 4 }
tnLldpConfigMedPolicyRowEditorVlanId OBJECT-TYPE
SYNTAX TNUnsigned16 (1..4095)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The LLDP policy VLAN ID. Only valid when policy 'Tagged' is TRUE"
::= { tnLldpConfigMedPolicyRowEditor 5 }
tnLldpConfigMedPolicyRowEditorL2Priority OBJECT-TYPE
SYNTAX TNUnsigned8 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The LLDP policy L2 priority."
::= { tnLldpConfigMedPolicyRowEditor 6 }
tnLldpConfigMedPolicyRowEditorDscp OBJECT-TYPE
SYNTAX TNUnsigned8 (0..63)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The LLDP policy DSCP."
::= { tnLldpConfigMedPolicyRowEditor 7 }
tnLldpConfigMedPolicyRowEditorAction OBJECT-TYPE
SYNTAX TNRowEditorState
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Action"
::= { tnLldpConfigMedPolicyRowEditor 100 }
tnLldpStatus OBJECT IDENTIFIER
::= { tnLldpMibObjects 3 }
tnLldpStatusStatistics OBJECT IDENTIFIER
::= { tnLldpStatus 1 }
tnLldpStatusStatisticsGlobalCounters OBJECT IDENTIFIER
::= { tnLldpStatusStatistics 1 }
tnLldpStatusStatisticsGlobalCountersTableInserts OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Shows the number of new entries added since switch reboot."
::= { tnLldpStatusStatisticsGlobalCounters 1 }
tnLldpStatusStatisticsGlobalCountersTableDeletes OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Shows the number of new entries deleted since switch reboot."
::= { tnLldpStatusStatisticsGlobalCounters 2 }
tnLldpStatusStatisticsGlobalCountersTableDrops OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Shows the number of LLDP frames dropped due to the entry table being
full."
::= { tnLldpStatusStatisticsGlobalCounters 3 }
tnLldpStatusStatisticsGlobalCountersTableAgeOuts OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Shows the number of entries deleted due to Time-To-Live expiring."
::= { tnLldpStatusStatisticsGlobalCounters 4 }
tnLldpStatusStatisticsGlobalCountersLastChangeTime OBJECT-TYPE
SYNTAX TNUnsigned64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Shows the time when the last entry was last deleted or added. It also
shows the time elapsed since the last change was detected."
::= { tnLldpStatusStatisticsGlobalCounters 5 }
tnLldpStatusStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF TNLldpStatusStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table represents the LLDP interface counters"
::= { tnLldpStatusStatistics 2 }
tnLldpStatusStatisticsEntry OBJECT-TYPE
SYNTAX TNLldpStatusStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each port interface has a set of statistics counters"
INDEX { tnLldpStatusStatisticsIfIndex }
::= { tnLldpStatusStatisticsTable 1 }
TNLldpStatusStatisticsEntry ::= SEQUENCE {
tnLldpStatusStatisticsIfIndex TNInterfaceIndex,
tnLldpStatusStatisticsTxTotal Unsigned32,
tnLldpStatusStatisticsRxTotal Unsigned32,
tnLldpStatusStatisticsRxError Unsigned32,
tnLldpStatusStatisticsRxDiscarded Unsigned32,
tnLldpStatusStatisticsTLVsDiscarded Unsigned32,
tnLldpStatusStatisticsTLVsUnrecognized Unsigned32,
tnLldpStatusStatisticsTLVsOrgDiscarded Unsigned32,
tnLldpStatusStatisticsAgeOuts Unsigned32
}
tnLldpStatusStatisticsIfIndex OBJECT-TYPE
SYNTAX TNInterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Logical interface number index."
::= { tnLldpStatusStatisticsEntry 1 }
tnLldpStatusStatisticsTxTotal OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Shows the number of LLDP frames transmitted."
::= { tnLldpStatusStatisticsEntry 2 }
tnLldpStatusStatisticsRxTotal OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Shows the number of LLDP frames received."
::= { tnLldpStatusStatisticsEntry 3 }
tnLldpStatusStatisticsRxError OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Shows the number of received LLDP frames containing some kind of error."
::= { tnLldpStatusStatisticsEntry 4 }
tnLldpStatusStatisticsRxDiscarded OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Show the number of LLDP frames discarded. If a LLDP frame is received
at an interface, and the switch's internal table has run full, the LLDP
frame is counted and discarded. This situation is known as 'Too Many
Neighbors' in the LLDP standard. LLDP frames require a new entry in the
table when the Chassis ID or Remote Port ID is not already contained
within the table. Entries are removed from the table when a given
interface's link is down, an LLDP shutdown frame is received, or when
the entry ages out."
::= { tnLldpStatusStatisticsEntry 5 }
tnLldpStatusStatisticsTLVsDiscarded OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Shows the number of TLVs discarded. Each LLDP frame can contain
multiple pieces of information, known as TLVs (TLV is short for 'Type
Length Value'). If a TLV is malformed, it is counted and discarded."
::= { tnLldpStatusStatisticsEntry 6 }
tnLldpStatusStatisticsTLVsUnrecognized OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Shows the number of well-formed TLVs, but with an unknown type value."
::= { tnLldpStatusStatisticsEntry 7 }
tnLldpStatusStatisticsTLVsOrgDiscarded OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Shows the number of well-formed TLVs, but with an organizationally TLV
which is not supported."
::= { tnLldpStatusStatisticsEntry 8 }
tnLldpStatusStatisticsAgeOuts OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Show the number of age-outs. Each frame contains information about how
long time the LLDP information is valid (age-out time). If no new LLDP
frame is received within the age out time, the information is removed,
and the counter is incremented."
::= { tnLldpStatusStatisticsEntry 9 }
tnLldpStatusNeighborsInformationTable OBJECT-TYPE
SYNTAX SEQUENCE OF TNLldpStatusNeighborsInformationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is a table to show the LLDP neighbors information for a specific
interface."
::= { tnLldpStatus 2 }
tnLldpStatusNeighborsInformationEntry OBJECT-TYPE
SYNTAX TNLldpStatusNeighborsInformationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each interface has a set of neighbors information"
INDEX { tnLldpStatusNeighborsInformationIfIndex, tnLldpStatusNeighborsInformationLldpmedIndex }
::= { tnLldpStatusNeighborsInformationTable 1 }
TNLldpStatusNeighborsInformationEntry ::= SEQUENCE {
tnLldpStatusNeighborsInformationIfIndex TNInterfaceIndex,
tnLldpStatusNeighborsInformationLldpmedIndex Integer32,
tnLldpStatusNeighborsInformationChassisId TNDisplayString,
tnLldpStatusNeighborsInformationPortId TNDisplayString,
tnLldpStatusNeighborsInformationPortDescription TNDisplayString,
tnLldpStatusNeighborsInformationSystemName TNDisplayString,
tnLldpStatusNeighborsInformationSystemDescription TNDisplayString,
tnLldpStatusNeighborsInformationSystemCapabilities TNUnsigned16,
tnLldpStatusNeighborsInformationSystemCapabilitiesEnable TNUnsigned16
}
tnLldpStatusNeighborsInformationIfIndex OBJECT-TYPE
SYNTAX TNInterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Logical interface number index."
::= { tnLldpStatusNeighborsInformationEntry 1 }
tnLldpStatusNeighborsInformationLldpmedIndex OBJECT-TYPE
SYNTAX Integer32 (0..192)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Neighbor information table entry index."
::= { tnLldpStatusNeighborsInformationEntry 2 }
tnLldpStatusNeighborsInformationChassisId OBJECT-TYPE
SYNTAX TNDisplayString (SIZE(0..254))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Shows the LLDP neighbor's chassis Id."
::= { tnLldpStatusNeighborsInformationEntry 4 }
tnLldpStatusNeighborsInformationPortId OBJECT-TYPE
SYNTAX TNDisplayString (SIZE(0..254))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Shows the LLDP neighbor's port id."
::= { tnLldpStatusNeighborsInformationEntry 5 }
tnLldpStatusNeighborsInformationPortDescription OBJECT-TYPE
SYNTAX TNDisplayString (SIZE(0..254))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Shows the LLDP neighbor's port description."
::= { tnLldpStatusNeighborsInformationEntry 6 }
tnLldpStatusNeighborsInformationSystemName OBJECT-TYPE
SYNTAX TNDisplayString (SIZE(0..254))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Shows the LLDP neighbor's system name."
::= { tnLldpStatusNeighborsInformationEntry 7 }
tnLldpStatusNeighborsInformationSystemDescription OBJECT-TYPE
SYNTAX TNDisplayString (SIZE(0..254))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Shows the LLDP neighbor's system description."
::= { tnLldpStatusNeighborsInformationEntry 8 }
tnLldpStatusNeighborsInformationSystemCapabilities OBJECT-TYPE
SYNTAX TNUnsigned16
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Shows the LLDP neighbor's system capabilities as bit mask.
If the bit is set, it means that the functionality is supported by the
neighbor system.
Bit 0 represents Other.
Bit 1 represents Repeater.
Bit 2 represents Bridge.
Bit 3 represents WLAN Access Point.
Bit 4 represents Router.
Bit 5 represents Telephone.
Bit 6 represents DOCSIS cable device.
Bit 7 represents Station Only.
Bit 8 represents Reserved."
::= { tnLldpStatusNeighborsInformationEntry 9 }
tnLldpStatusNeighborsInformationSystemCapabilitiesEnable OBJECT-TYPE
SYNTAX TNUnsigned16
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Shows the LLDP neighbor's system capabilities which is enabled.
If the bit is set, it means that the functionality is currently enabled
at the neighbor system.
Bit 0 represents Other.
Bit 1 represents Repeater.
Bit 2 represents Bridge.
Bit 3 represents WLAN Access Point.
Bit 4 represents Router.
Bit 5 represents Telephone.
Bit 6 represents DOCSIS cable device.
Bit 7 represents Station Only.
Bit 8 represents Reserved."
::= { tnLldpStatusNeighborsInformationEntry 10 }
tnLldpStatusNeighborsMgmtInformationTable OBJECT-TYPE
SYNTAX SEQUENCE OF TNLldpStatusNeighborsMgmtInformationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is a table to show the LLDP neighbors information for a specific
interface."
::= { tnLldpStatus 3 }
tnLldpStatusNeighborsMgmtInformationEntry OBJECT-TYPE
SYNTAX TNLldpStatusNeighborsMgmtInformationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each interface has a set of neighbors information"
INDEX { tnLldpStatusNeighborsMgmtInformationIfIndex, tnLldpStatusNeighborsMgmtInformationLldpmedIndex, tnLldpStatusNeighborsMgmtInformationLldpManagement }
::= { tnLldpStatusNeighborsMgmtInformationTable 1 }
TNLldpStatusNeighborsMgmtInformationEntry ::= SEQUENCE {
tnLldpStatusNeighborsMgmtInformationIfIndex TNInterfaceIndex,
tnLldpStatusNeighborsMgmtInformationLldpmedIndex Integer32,
tnLldpStatusNeighborsMgmtInformationLldpManagement Integer32,
tnLldpStatusNeighborsMgmtInformationSystemMgmAddressSubtype TNUnsigned8,
tnLldpStatusNeighborsMgmtInformationSystemMgmtAddress TNDisplayString,
tnLldpStatusNeighborsMgmtInformationSystemMgmtInterfaceSubtype Integer32,
tnLldpStatusNeighborsMgmtInformationSystemMgmtInterface Integer32,
tnLldpStatusNeighborsMgmtInformationSystemMgmtOid OBJECT IDENTIFIER
}
tnLldpStatusNeighborsMgmtInformationIfIndex OBJECT-TYPE
SYNTAX TNInterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Logical interface number index."
::= { tnLldpStatusNeighborsMgmtInformationEntry 1 }
tnLldpStatusNeighborsMgmtInformationLldpmedIndex OBJECT-TYPE
SYNTAX Integer32 (0..192)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Neighbor information table entry index."
::= { tnLldpStatusNeighborsMgmtInformationEntry 2 }
tnLldpStatusNeighborsMgmtInformationLldpManagement OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Neighbor management information table entry index."
::= { tnLldpStatusNeighborsMgmtInformationEntry 4 }
tnLldpStatusNeighborsMgmtInformationSystemMgmAddressSubtype OBJECT-TYPE
SYNTAX TNUnsigned8
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LLDP neighbor's management address subtype , section 9.5.9.3
IEEE802.1AB-2005."
::= { tnLldpStatusNeighborsMgmtInformationEntry 5 }
tnLldpStatusNeighborsMgmtInformationSystemMgmtAddress OBJECT-TYPE
SYNTAX TNDisplayString (SIZE(0..31))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LLDP neighbor's management address string, section 9.5.9.4
IEEE802.1AB-2005."
::= { tnLldpStatusNeighborsMgmtInformationEntry 6 }
tnLldpStatusNeighborsMgmtInformationSystemMgmtInterfaceSubtype OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface numbering subtype, section 9.5.9.5 IEEE802.1AB-2005."
::= { tnLldpStatusNeighborsMgmtInformationEntry 7 }
tnLldpStatusNeighborsMgmtInformationSystemMgmtInterface OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface number, section 9.5.9.6 IEEE802.1AB-2005."
::= { tnLldpStatusNeighborsMgmtInformationEntry 8 }
tnLldpStatusNeighborsMgmtInformationSystemMgmtOid OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Object identifier, section 9.5.9.8 IEEE802.1AB-2005."
::= { tnLldpStatusNeighborsMgmtInformationEntry 9 }
tnLldpStatusMed OBJECT IDENTIFIER
::= { tnLldpStatus 4 }
tnLldpStatusMedRemoteDeviceInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF TNLldpStatusMedRemoteDeviceInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is a table to show the LLDP neighbors information for a specific
interface."
::= { tnLldpStatusMed 1 }
tnLldpStatusMedRemoteDeviceInfoEntry OBJECT-TYPE
SYNTAX TNLldpStatusMedRemoteDeviceInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each interface has a set of neighbors information"
INDEX { tnLldpStatusMedRemoteDeviceInfoIfIndex, tnLldpStatusMedRemoteDeviceInfoLldpmedIndex }
::= { tnLldpStatusMedRemoteDeviceInfoTable 1 }
TNLldpStatusMedRemoteDeviceInfoEntry ::= SEQUENCE {
tnLldpStatusMedRemoteDeviceInfoIfIndex TNInterfaceIndex,
tnLldpStatusMedRemoteDeviceInfoLldpmedIndex Integer32,
tnLldpStatusMedRemoteDeviceInfoCapabilities TNUnsigned16,
tnLldpStatusMedRemoteDeviceInfoCapabilitiesEnabled TNUnsigned16,
tnLldpStatusMedRemoteDeviceInfoLatitude TNInteger64,
tnLldpStatusMedRemoteDeviceInfoLongitude TNInteger64,
tnLldpStatusMedRemoteDeviceInfoAltitudeType TNlldpmedAltitudeType,
tnLldpStatusMedRemoteDeviceInfoAltitude Integer32,
tnLldpStatusMedRemoteDeviceInfoDatum TNlldpmedDatumType,
tnLldpStatusMedRemoteDeviceInfoElinaddr TNDisplayString,
tnLldpStatusMedRemoteDeviceInfoDeviceType TNlldpmedRemoteDeviceType,
tnLldpStatusMedRemoteDeviceInfoHwRev TNDisplayString,
tnLldpStatusMedRemoteDeviceInfoFwRev TNDisplayString,
tnLldpStatusMedRemoteDeviceInfoSwRev TNDisplayString,
tnLldpStatusMedRemoteDeviceInfoSerialNo TNDisplayString,
tnLldpStatusMedRemoteDeviceInfoManufacturerName TNDisplayString,
tnLldpStatusMedRemoteDeviceInfoModelName TNDisplayString,
tnLldpStatusMedRemoteDeviceInfoAssetId TNDisplayString,
tnLldpStatusMedRemoteDeviceInfoEeeRxTwSys TNUnsigned16,
tnLldpStatusMedRemoteDeviceInfoEeeTxTwSys TNUnsigned16,
tnLldpStatusMedRemoteDeviceInfoEeeFbTwSys TNUnsigned16,
tnLldpStatusMedRemoteDeviceInfoEeeTxTwSysEcho TNUnsigned16,
tnLldpStatusMedRemoteDeviceInfoEeeRxTwSysEcho TNUnsigned16
}
tnLldpStatusMedRemoteDeviceInfoIfIndex OBJECT-TYPE
SYNTAX TNInterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Logical interface number index."
::= { tnLldpStatusMedRemoteDeviceInfoEntry 1 }
tnLldpStatusMedRemoteDeviceInfoLldpmedIndex OBJECT-TYPE
SYNTAX Integer32 (0..192)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Neighbor information table entry index."
::= { tnLldpStatusMedRemoteDeviceInfoEntry 2 }
tnLldpStatusMedRemoteDeviceInfoCapabilities OBJECT-TYPE
SYNTAX TNUnsigned16
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LLDP neighbor's capabilities bit mask.
Bit 0 represents LLDP-MED capabilities.
Bit 1 represents Network Policy.
Bit 2 represents Location Identification.
Bit 3 represents Extended Power via MDI - PSE.
Bit 4 represents Extended Power via MDI - PD
Bit 5 represents Inventory
"
::= { tnLldpStatusMedRemoteDeviceInfoEntry 4 }
tnLldpStatusMedRemoteDeviceInfoCapabilitiesEnabled OBJECT-TYPE
SYNTAX TNUnsigned16
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LLDP neighbor's capabilities bit mask for the capabilities which are
currently enabled.
Bit 0 represents LLDP-MED capabilities.
Bit 1 represents Network Policy.
Bit 2 represents Location Identification.
Bit 3 represents Extended Power via MDI - PSE.
Bit 4 represents Extended Power via MDI - PD
Bit 5 represents Inventory
"
::= { tnLldpStatusMedRemoteDeviceInfoEntry 5 }
tnLldpStatusMedRemoteDeviceInfoLatitude OBJECT-TYPE
SYNTAX TNInteger64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Latitude degrees in 2s-complement as specified in RFC 3825. Positive
numbers are north of the equator and negative numbers are south of the
equator."
::= { tnLldpStatusMedRemoteDeviceInfoEntry 6 }
tnLldpStatusMedRemoteDeviceInfoLongitude OBJECT-TYPE
SYNTAX TNInteger64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Longitude degrees in 2s-complement as specified in RFC 3825. Positive
values are East of the prime meridian and negative numbers are West of
the prime meridian."
::= { tnLldpStatusMedRemoteDeviceInfoEntry 7 }
tnLldpStatusMedRemoteDeviceInfoAltitudeType OBJECT-TYPE
SYNTAX TNlldpmedAltitudeType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Altitude type as either floors or meters. Meters are representing
meters of altitude defined by the vertical datum specified. Floors are
representing altitude in a form more relevant in buildings which have
different floor-to-floor dimensions. An altitude = 0.0 is meaningful
even outside a building, and represents ground level at the given
latitude and longitude. Inside a building, 0.0 represents the floor
level associated with ground level at the main entrance."
::= { tnLldpStatusMedRemoteDeviceInfoEntry 8 }
tnLldpStatusMedRemoteDeviceInfoAltitude OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Altitude value in 2s-complement as specified in RFC 3825"
::= { tnLldpStatusMedRemoteDeviceInfoEntry 9 }
tnLldpStatusMedRemoteDeviceInfoDatum OBJECT-TYPE
SYNTAX TNlldpmedDatumType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Datum (geodetic system) .
The Map Datum is used for the coordinates given in these options:
WGS84: (Geographical 3D) - World Geodesic System 1984, CRS Code 4327,
Prime Meridian Name: Greenwich.
NAD83/NAVD88: North American Datum 1983, CRS Code 4269, Prime Meridian
Name: Greenwich; The associated vertical datum is the North American
Vertical Datum of 1988 (NAVD88). This datum pair is to be used when
referencing locations on land, not near tidal water(which would use
Datum = NAD83/MLLW).
NAD83/MLLW: North American Datum 1983, CRS Code 4269, Prime Meridian
Name: Greenwich; The associated vertical datum is Mean Lower Low Water
(MLLW). This datum pair is to be used when referencing locations on
water/sea/ocean."
::= { tnLldpStatusMedRemoteDeviceInfoEntry 10 }
tnLldpStatusMedRemoteDeviceInfoElinaddr OBJECT-TYPE
SYNTAX TNDisplayString (SIZE(0..25))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Emergency Call Service ELIN identifier data format is defined to carry
the ELIN identifier as used during emergency call setup to a
traditional CAMA or ISDN trunk-based PSAP. This format consists of a
numerical digit string, corresponding to the ELIN to be used for
emergency calling. Maximum number of octets are 25."
::= { tnLldpStatusMedRemoteDeviceInfoEntry 11 }
tnLldpStatusMedRemoteDeviceInfoDeviceType OBJECT-TYPE
SYNTAX TNlldpmedRemoteDeviceType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Shows the LLDP neighbor's device type."
::= { tnLldpStatusMedRemoteDeviceInfoEntry 12 }
tnLldpStatusMedRemoteDeviceInfoHwRev OBJECT-TYPE
SYNTAX TNDisplayString (SIZE(0..31))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Shows the LLDP neighbor's hardware revision."
::= { tnLldpStatusMedRemoteDeviceInfoEntry 13 }
tnLldpStatusMedRemoteDeviceInfoFwRev OBJECT-TYPE
SYNTAX TNDisplayString (SIZE(0..31))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Shows the LLDP neighbor's firmware revision."
::= { tnLldpStatusMedRemoteDeviceInfoEntry 14 }
tnLldpStatusMedRemoteDeviceInfoSwRev OBJECT-TYPE
SYNTAX TNDisplayString (SIZE(0..31))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Shows the LLDP neighbor's software revision."
::= { tnLldpStatusMedRemoteDeviceInfoEntry 15 }
tnLldpStatusMedRemoteDeviceInfoSerialNo OBJECT-TYPE
SYNTAX TNDisplayString (SIZE(0..31))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Shows the LLDP neighbor's serial number."
::= { tnLldpStatusMedRemoteDeviceInfoEntry 16 }
tnLldpStatusMedRemoteDeviceInfoManufacturerName OBJECT-TYPE
SYNTAX TNDisplayString (SIZE(0..31))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Shows the LLDP neighbor's manufacturer name."
::= { tnLldpStatusMedRemoteDeviceInfoEntry 17 }
tnLldpStatusMedRemoteDeviceInfoModelName OBJECT-TYPE
SYNTAX TNDisplayString (SIZE(0..31))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Shows the LLDP neighbor's model name."
::= { tnLldpStatusMedRemoteDeviceInfoEntry 18 }
tnLldpStatusMedRemoteDeviceInfoAssetId OBJECT-TYPE
SYNTAX TNDisplayString (SIZE(0..31))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Shows the LLDP neighbor's asset id."
::= { tnLldpStatusMedRemoteDeviceInfoEntry 19 }
tnLldpStatusMedRemoteDeviceInfoEeeRxTwSys OBJECT-TYPE
SYNTAX TNUnsigned16
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Shows the LLDP neighbor's Receive tw_sys_rx . Tw_sys_rx is defined as
the time (expressed in microseconds) that the transmitting link partner
will wait before it starts transmitting data after leaving the Low
Power Idle (LPI) mode. Section 79.3.5.2, IEEE802.3az."
::= { tnLldpStatusMedRemoteDeviceInfoEntry 20 }
tnLldpStatusMedRemoteDeviceInfoEeeTxTwSys OBJECT-TYPE
SYNTAX TNUnsigned16
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Shows the LLDP neighbor's Transmit Tw_sys_tx . Tw_sys_tx is defined as
the time (expressed in microseconds) that the receiving link partner is
requesting the transmitting link partner to wait before starting the
transmission data following the Low Power Idle (LPI) mode. Section
79.3.5.1, IEEE802.3az."
::= { tnLldpStatusMedRemoteDeviceInfoEntry 21 }
tnLldpStatusMedRemoteDeviceInfoEeeFbTwSys OBJECT-TYPE
SYNTAX TNUnsigned16
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Shows the LLDP neighbor's Fallback tw_sys_tx. A receiving link partner
may inform the transmitter of an alternate desired Tw_sys_tx. Since a
receiving link partner is likely to have discrete levels for savings,
this provides the transmitter with additional information that it may
use for a more efficient allocation. Section 79.3.5.3, IEEE802.3az."
::= { tnLldpStatusMedRemoteDeviceInfoEntry 22 }
tnLldpStatusMedRemoteDeviceInfoEeeTxTwSysEcho OBJECT-TYPE
SYNTAX TNUnsigned16
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Shows the LLDP neighbor's echo transmit Tw. The respective echo values
shall be defined as the local link partners reflection (echo) of the
remote link partners respective values. When a local link partner
receives its echoed values from the remote link partner it can
determine whether or not the remote link partner has received,
registered, and processed its most recent values. Section 79.3.5.4,
IEEE802.3az."
::= { tnLldpStatusMedRemoteDeviceInfoEntry 23 }
tnLldpStatusMedRemoteDeviceInfoEeeRxTwSysEcho OBJECT-TYPE
SYNTAX TNUnsigned16
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Shows the LLDP neighbor's echo receive Tw. The respective echo values
shall be defined as the local link partners reflection (echo) of the
remote link partners respective values. When a local link partner
receives its echoed values from the remote link partner it can
determine whether or not the remote link partner has received,
registered, and processed its most recent values. Section 79.3.5.4,
IEEE802.3az."
::= { tnLldpStatusMedRemoteDeviceInfoEntry 24 }
tnLldpStatusMedRemoteDeviceLocInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF TNLldpStatusMedRemoteDeviceLocInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is a table to show the LLDP-MED remote device (neighbor) civic
location information for a specific interface."
::= { tnLldpStatusMed 2 }
tnLldpStatusMedRemoteDeviceLocInfoEntry OBJECT-TYPE
SYNTAX TNLldpStatusMedRemoteDeviceLocInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each interface has a set of neighbors information"
INDEX { tnLldpStatusMedRemoteDeviceLocInfoIfIndex, tnLldpStatusMedRemoteDeviceLocInfoLldpmedIndex }
::= { tnLldpStatusMedRemoteDeviceLocInfoTable 1 }
TNLldpStatusMedRemoteDeviceLocInfoEntry ::= SEQUENCE {
tnLldpStatusMedRemoteDeviceLocInfoIfIndex TNInterfaceIndex,
tnLldpStatusMedRemoteDeviceLocInfoLldpmedIndex Integer32,
tnLldpStatusMedRemoteDeviceLocInfoState TNDisplayString,
tnLldpStatusMedRemoteDeviceLocInfoCounty TNDisplayString,
tnLldpStatusMedRemoteDeviceLocInfoCity TNDisplayString,
tnLldpStatusMedRemoteDeviceLocInfoDistrict TNDisplayString,
tnLldpStatusMedRemoteDeviceLocInfoBlock TNDisplayString,
tnLldpStatusMedRemoteDeviceLocInfoStreet TNDisplayString,
tnLldpStatusMedRemoteDeviceLocInfoLeadingStreetDirection TNDisplayString,
tnLldpStatusMedRemoteDeviceLocInfoTrailingStreetSuffix TNDisplayString,
tnLldpStatusMedRemoteDeviceLocInfoStreetSuffix TNDisplayString,
tnLldpStatusMedRemoteDeviceLocInfoHouseNo TNDisplayString,
tnLldpStatusMedRemoteDeviceLocInfoHouseNoSuffix TNDisplayString,
tnLldpStatusMedRemoteDeviceLocInfoLandmark TNDisplayString,
tnLldpStatusMedRemoteDeviceLocInfoAdditionalInfo TNDisplayString,
tnLldpStatusMedRemoteDeviceLocInfoName TNDisplayString,
tnLldpStatusMedRemoteDeviceLocInfoZipCode TNDisplayString,
tnLldpStatusMedRemoteDeviceLocInfoBuilding TNDisplayString,
tnLldpStatusMedRemoteDeviceLocInfoApartment TNDisplayString,
tnLldpStatusMedRemoteDeviceLocInfoFloor TNDisplayString,
tnLldpStatusMedRemoteDeviceLocInfoRoomNumber TNDisplayString,
tnLldpStatusMedRemoteDeviceLocInfoPlaceType TNDisplayString,
tnLldpStatusMedRemoteDeviceLocInfoPostalCommunityName TNDisplayString,
tnLldpStatusMedRemoteDeviceLocInfoPoBox TNDisplayString,
tnLldpStatusMedRemoteDeviceLocInfoAdditionalCode TNDisplayString,
tnLldpStatusMedRemoteDeviceLocInfoCountryCode TNDisplayString
}
tnLldpStatusMedRemoteDeviceLocInfoIfIndex OBJECT-TYPE
SYNTAX TNInterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Logical interface number index."
::= { tnLldpStatusMedRemoteDeviceLocInfoEntry 1 }
tnLldpStatusMedRemoteDeviceLocInfoLldpmedIndex OBJECT-TYPE
SYNTAX Integer32 (0..192)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Neighbor information table entry index."
::= { tnLldpStatusMedRemoteDeviceLocInfoEntry 2 }
tnLldpStatusMedRemoteDeviceLocInfoState OBJECT-TYPE
SYNTAX TNDisplayString (SIZE(0..250))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"National subdivision"
::= { tnLldpStatusMedRemoteDeviceLocInfoEntry 5 }
tnLldpStatusMedRemoteDeviceLocInfoCounty OBJECT-TYPE
SYNTAX TNDisplayString (SIZE(0..250))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"County"
::= { tnLldpStatusMedRemoteDeviceLocInfoEntry 6 }
tnLldpStatusMedRemoteDeviceLocInfoCity OBJECT-TYPE
SYNTAX TNDisplayString (SIZE(0..250))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"City"
::= { tnLldpStatusMedRemoteDeviceLocInfoEntry 7 }
tnLldpStatusMedRemoteDeviceLocInfoDistrict OBJECT-TYPE
SYNTAX TNDisplayString (SIZE(0..250))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"City district"
::= { tnLldpStatusMedRemoteDeviceLocInfoEntry 8 }
tnLldpStatusMedRemoteDeviceLocInfoBlock OBJECT-TYPE
SYNTAX TNDisplayString (SIZE(0..250))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Block (Neighborhood)"
::= { tnLldpStatusMedRemoteDeviceLocInfoEntry 9 }
tnLldpStatusMedRemoteDeviceLocInfoStreet OBJECT-TYPE
SYNTAX TNDisplayString (SIZE(0..250))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Street"
::= { tnLldpStatusMedRemoteDeviceLocInfoEntry 10 }
tnLldpStatusMedRemoteDeviceLocInfoLeadingStreetDirection OBJECT-TYPE
SYNTAX TNDisplayString (SIZE(0..250))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Street Direction"
::= { tnLldpStatusMedRemoteDeviceLocInfoEntry 11 }
tnLldpStatusMedRemoteDeviceLocInfoTrailingStreetSuffix OBJECT-TYPE
SYNTAX TNDisplayString (SIZE(0..250))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Trailing Street Suffix"
::= { tnLldpStatusMedRemoteDeviceLocInfoEntry 12 }
tnLldpStatusMedRemoteDeviceLocInfoStreetSuffix OBJECT-TYPE
SYNTAX TNDisplayString (SIZE(0..250))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Street Suffix"
::= { tnLldpStatusMedRemoteDeviceLocInfoEntry 13 }
tnLldpStatusMedRemoteDeviceLocInfoHouseNo OBJECT-TYPE
SYNTAX TNDisplayString (SIZE(0..250))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"House No."
::= { tnLldpStatusMedRemoteDeviceLocInfoEntry 14 }
tnLldpStatusMedRemoteDeviceLocInfoHouseNoSuffix OBJECT-TYPE
SYNTAX TNDisplayString (SIZE(0..250))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"House No. Suffix"
::= { tnLldpStatusMedRemoteDeviceLocInfoEntry 15 }
tnLldpStatusMedRemoteDeviceLocInfoLandmark OBJECT-TYPE
SYNTAX TNDisplayString (SIZE(0..250))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Landmark"
::= { tnLldpStatusMedRemoteDeviceLocInfoEntry 16 }
tnLldpStatusMedRemoteDeviceLocInfoAdditionalInfo OBJECT-TYPE
SYNTAX TNDisplayString (SIZE(0..250))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Additional Location Info"
::= { tnLldpStatusMedRemoteDeviceLocInfoEntry 17 }
tnLldpStatusMedRemoteDeviceLocInfoName OBJECT-TYPE
SYNTAX TNDisplayString (SIZE(0..250))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Name"
::= { tnLldpStatusMedRemoteDeviceLocInfoEntry 18 }
tnLldpStatusMedRemoteDeviceLocInfoZipCode OBJECT-TYPE
SYNTAX TNDisplayString (SIZE(0..250))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Zip code"
::= { tnLldpStatusMedRemoteDeviceLocInfoEntry 19 }
tnLldpStatusMedRemoteDeviceLocInfoBuilding OBJECT-TYPE
SYNTAX TNDisplayString (SIZE(0..250))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Building"
::= { tnLldpStatusMedRemoteDeviceLocInfoEntry 20 }
tnLldpStatusMedRemoteDeviceLocInfoApartment OBJECT-TYPE
SYNTAX TNDisplayString (SIZE(0..250))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Apartment/unit"
::= { tnLldpStatusMedRemoteDeviceLocInfoEntry 21 }
tnLldpStatusMedRemoteDeviceLocInfoFloor OBJECT-TYPE
SYNTAX TNDisplayString (SIZE(0..250))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Floor"
::= { tnLldpStatusMedRemoteDeviceLocInfoEntry 22 }
tnLldpStatusMedRemoteDeviceLocInfoRoomNumber OBJECT-TYPE
SYNTAX TNDisplayString (SIZE(0..250))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Room Number"
::= { tnLldpStatusMedRemoteDeviceLocInfoEntry 23 }
tnLldpStatusMedRemoteDeviceLocInfoPlaceType OBJECT-TYPE
SYNTAX TNDisplayString (SIZE(0..250))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Place type"
::= { tnLldpStatusMedRemoteDeviceLocInfoEntry 24 }
tnLldpStatusMedRemoteDeviceLocInfoPostalCommunityName OBJECT-TYPE
SYNTAX TNDisplayString (SIZE(0..250))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Postal Community Name"
::= { tnLldpStatusMedRemoteDeviceLocInfoEntry 25 }
tnLldpStatusMedRemoteDeviceLocInfoPoBox OBJECT-TYPE
SYNTAX TNDisplayString (SIZE(0..250))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Post Office Box"
::= { tnLldpStatusMedRemoteDeviceLocInfoEntry 26 }
tnLldpStatusMedRemoteDeviceLocInfoAdditionalCode OBJECT-TYPE
SYNTAX TNDisplayString (SIZE(0..250))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Addination Code"
::= { tnLldpStatusMedRemoteDeviceLocInfoEntry 27 }
tnLldpStatusMedRemoteDeviceLocInfoCountryCode OBJECT-TYPE
SYNTAX TNDisplayString (SIZE(0..2))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The two-letter ISO 3166 country code in capital ASCII letters -
Example: DK, DE or US."
::= { tnLldpStatusMedRemoteDeviceLocInfoEntry 28 }
tnLldpStatusMedRemoteDeviceNetworkPolicyInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF TNLldpStatusMedRemoteDeviceNetworkPolicyInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is a table to show the LLDP-MED remote device (neighbor) network
policies information for a specific interface."
::= { tnLldpStatusMed 3 }
tnLldpStatusMedRemoteDeviceNetworkPolicyInfoEntry OBJECT-TYPE
SYNTAX TNLldpStatusMedRemoteDeviceNetworkPolicyInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each interface has a set of neighbors information"
INDEX { tnLldpStatusMedRemoteDeviceNetworkPolicyInfoIfIndex, tnLldpStatusMedRemoteDeviceNetworkPolicyInfoLldpmedIndex, tnLldpStatusMedRemoteDeviceNetworkPolicyInfoLldpmedPolicy }
::= { tnLldpStatusMedRemoteDeviceNetworkPolicyInfoTable 1 }
TNLldpStatusMedRemoteDeviceNetworkPolicyInfoEntry ::= SEQUENCE {
tnLldpStatusMedRemoteDeviceNetworkPolicyInfoIfIndex TNInterfaceIndex,
tnLldpStatusMedRemoteDeviceNetworkPolicyInfoLldpmedIndex Integer32,
tnLldpStatusMedRemoteDeviceNetworkPolicyInfoLldpmedPolicy Integer32,
tnLldpStatusMedRemoteDeviceNetworkPolicyInfoApplicationType TNlldpmedRemoteNetworkPolicyApplicationType,
tnLldpStatusMedRemoteDeviceNetworkPolicyInfoUnknownPolicy TruthValue,
tnLldpStatusMedRemoteDeviceNetworkPolicyInfoTagged TruthValue,
tnLldpStatusMedRemoteDeviceNetworkPolicyInfoVlanId TNUnsigned16,
tnLldpStatusMedRemoteDeviceNetworkPolicyInfoL2Priority TNUnsigned8,
tnLldpStatusMedRemoteDeviceNetworkPolicyInfoDscp TNUnsigned8
}
tnLldpStatusMedRemoteDeviceNetworkPolicyInfoIfIndex OBJECT-TYPE
SYNTAX TNInterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Logical interface number index."
::= { tnLldpStatusMedRemoteDeviceNetworkPolicyInfoEntry 1 }
tnLldpStatusMedRemoteDeviceNetworkPolicyInfoLldpmedIndex OBJECT-TYPE
SYNTAX Integer32 (0..192)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Neighbor information table entry index."
::= { tnLldpStatusMedRemoteDeviceNetworkPolicyInfoEntry 2 }
tnLldpStatusMedRemoteDeviceNetworkPolicyInfoLldpmedPolicy OBJECT-TYPE
SYNTAX Integer32 (0..31)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Policy index."
::= { tnLldpStatusMedRemoteDeviceNetworkPolicyInfoEntry 3 }
tnLldpStatusMedRemoteDeviceNetworkPolicyInfoApplicationType OBJECT-TYPE
SYNTAX TNlldpmedRemoteNetworkPolicyApplicationType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The LLDP policy application type."
::= { tnLldpStatusMedRemoteDeviceNetworkPolicyInfoEntry 5 }
tnLldpStatusMedRemoteDeviceNetworkPolicyInfoUnknownPolicy OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Policy indicates that an Endpoint Device wants to explicitly advertise
that the policy is required by the device. Can be either Defined or
Unknown
Unknown: The network policy for the specified application type is
currently unknown.
Defined: The network policy is defined (known)."
::= { tnLldpStatusMedRemoteDeviceNetworkPolicyInfoEntry 6 }
tnLldpStatusMedRemoteDeviceNetworkPolicyInfoTagged OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Defines if LLDP policy uses tagged VLAN."
::= { tnLldpStatusMedRemoteDeviceNetworkPolicyInfoEntry 7 }
tnLldpStatusMedRemoteDeviceNetworkPolicyInfoVlanId OBJECT-TYPE
SYNTAX TNUnsigned16 (1..4095)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The policy VLAN ID. Only valid when policy 'Tagged' is TRUE"
::= { tnLldpStatusMedRemoteDeviceNetworkPolicyInfoEntry 8 }
tnLldpStatusMedRemoteDeviceNetworkPolicyInfoL2Priority OBJECT-TYPE
SYNTAX TNUnsigned8 (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Shows the LLDP neighbor's policy L2 priority."
::= { tnLldpStatusMedRemoteDeviceNetworkPolicyInfoEntry 9 }
tnLldpStatusMedRemoteDeviceNetworkPolicyInfoDscp OBJECT-TYPE
SYNTAX TNUnsigned8 (0..63)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LLDP policy DSCP."
::= { tnLldpStatusMedRemoteDeviceNetworkPolicyInfoEntry 10 }
tnLldpControl OBJECT IDENTIFIER
::= { tnLldpMibObjects 4 }
tnLldpControlStatisticsClear OBJECT IDENTIFIER
::= { tnLldpControl 1 }
tnLldpControlStatisticsClearTable OBJECT-TYPE
SYNTAX SEQUENCE OF TNLldpControlStatisticsClearEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is a table to clear LLDP statistics for a specific interface."
::= { tnLldpControlStatisticsClear 1 }
tnLldpControlStatisticsClearEntry OBJECT-TYPE
SYNTAX TNLldpControlStatisticsClearEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each interface has a set of statistics counters"
INDEX { tnLldpControlStatisticsClearIfIndex }
::= { tnLldpControlStatisticsClearTable 1 }
TNLldpControlStatisticsClearEntry ::= SEQUENCE {
tnLldpControlStatisticsClearIfIndex TNInterfaceIndex,
tnLldpControlStatisticsClearStatisticsClear TruthValue
}
tnLldpControlStatisticsClearIfIndex OBJECT-TYPE
SYNTAX TNInterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Logical interface number index."
::= { tnLldpControlStatisticsClearEntry 1 }
tnLldpControlStatisticsClearStatisticsClear OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set to TRUE to clear the LLDP statistics of an interface."
::= { tnLldpControlStatisticsClearEntry 2 }
tnLldpControlStatisticsClearGlobal OBJECT IDENTIFIER
::= { tnLldpControlStatisticsClear 2 }
tnLldpControlStatisticsClearGlobalClear OBJECT-TYPE
SYNTAX TNUnsigned8
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Clear LLDP global counters."
::= { tnLldpControlStatisticsClearGlobal 1 }
tnLldpMibConformance OBJECT IDENTIFIER
::= { tnLldpMib 2 }
tnLldpMibCompliances OBJECT IDENTIFIER
::= { tnLldpMibConformance 1 }
tnLldpMibGroups OBJECT IDENTIFIER
::= { tnLldpMibConformance 2 }
tnLldpConfigGlobalInfoGroup OBJECT-GROUP
OBJECTS { tnLldpConfigGlobalReInitDelay, tnLldpConfigGlobalMsgTxHold,
tnLldpConfigGlobalMsgTxInterval, tnLldpConfigGlobalTxDelay }
STATUS current
DESCRIPTION
"A collection of objects suitable for bulk operations."
::= { tnLldpMibGroups 1 }
tnLldpConfigInfoGroup OBJECT-GROUP
OBJECTS { tnLldpConfigAdminState, tnLldpConfigCdpAware,
tnLldpConfigOptionalTlvs }
STATUS current
DESCRIPTION
"A collection of objects suitable for bulk operations."
::= { tnLldpMibGroups 2 }
tnLldpConfigMedInfoGroup OBJECT-GROUP
OBJECTS { tnLldpConfigMedOptionalTlvs, tnLldpConfigMedDeviceType }
STATUS current
DESCRIPTION
"A collection of objects suitable for bulk operations."
::= { tnLldpMibGroups 3 }
tnLldpConfigMedPolicyInfoGroup OBJECT-GROUP
OBJECTS { tnLldpConfigMedPolicyApplicationType,
tnLldpConfigMedPolicyTagged, tnLldpConfigMedPolicyVlanId,
tnLldpConfigMedPolicyL2Priority, tnLldpConfigMedPolicyDscp,
tnLldpConfigMedPolicyAction }
STATUS current
DESCRIPTION
"A collection of objects suitable for bulk operations."
::= { tnLldpMibGroups 4 }
tnLldpConfigMedPolicyListInfoGroup OBJECT-GROUP
OBJECTS { tnLldpConfigMedPolicyListLldpmedPoliciesList }
STATUS current
DESCRIPTION
"A collection of objects suitable for bulk operations."
::= { tnLldpMibGroups 5 }
tnLldpConfigMedGlobalInfoGroup OBJECT-GROUP
OBJECTS { tnLldpConfigMedGlobalFastRepeatCount,
tnLldpConfigMedGlobalLatitude,
tnLldpConfigMedGlobalLongitude,
tnLldpConfigMedGlobalAltitudeType,
tnLldpConfigMedGlobalAltitude,
tnLldpConfigMedGlobalElinAddr, tnLldpConfigMedGlobalDatum,
tnLldpConfigMedGlobalCountryCode }
STATUS current
DESCRIPTION
"A collection of objects suitable for bulk operations."
::= { tnLldpMibGroups 6 }
tnLldpConfigMedLocationInformationInfoGroup OBJECT-GROUP
OBJECTS { tnLldpConfigMedLocationInformationCivicAddress }
STATUS current
DESCRIPTION
"A collection of objects suitable for bulk operations."
::= { tnLldpMibGroups 7 }
tnLldpConfigMedPolicyRowEditorInfoGroup OBJECT-GROUP
OBJECTS { tnLldpConfigMedPolicyRowEditorLldpmedPolicy,
tnLldpConfigMedPolicyRowEditorApplicationType,
tnLldpConfigMedPolicyRowEditorTagged,
tnLldpConfigMedPolicyRowEditorVlanId,
tnLldpConfigMedPolicyRowEditorL2Priority,
tnLldpConfigMedPolicyRowEditorDscp,
tnLldpConfigMedPolicyRowEditorAction }
STATUS current
DESCRIPTION
"A collection of objects suitable for bulk operations."
::= { tnLldpMibGroups 8 }
tnLldpStatusStatisticsGlobalCountersInfoGroup OBJECT-GROUP
OBJECTS { tnLldpStatusStatisticsGlobalCountersTableInserts,
tnLldpStatusStatisticsGlobalCountersTableDeletes,
tnLldpStatusStatisticsGlobalCountersTableDrops,
tnLldpStatusStatisticsGlobalCountersTableAgeOuts,
tnLldpStatusStatisticsGlobalCountersLastChangeTime }
STATUS current
DESCRIPTION
"A collection of objects suitable for bulk operations."
::= { tnLldpMibGroups 9 }
tnLldpStatusStatisticsTableInfoGroup OBJECT-GROUP
OBJECTS { tnLldpStatusStatisticsTxTotal,
tnLldpStatusStatisticsRxTotal,
tnLldpStatusStatisticsRxError,
tnLldpStatusStatisticsRxDiscarded,
tnLldpStatusStatisticsTLVsDiscarded,
tnLldpStatusStatisticsTLVsUnrecognized,
tnLldpStatusStatisticsTLVsOrgDiscarded,
tnLldpStatusStatisticsAgeOuts }
STATUS current
DESCRIPTION
"A collection of objects suitable for bulk operations."
::= { tnLldpMibGroups 10 }
tnLldpStatusNeighborsInformationInfoGroup OBJECT-GROUP
OBJECTS { tnLldpStatusNeighborsInformationChassisId,
tnLldpStatusNeighborsInformationPortId,
tnLldpStatusNeighborsInformationPortDescription,
tnLldpStatusNeighborsInformationSystemName,
tnLldpStatusNeighborsInformationSystemDescription,
tnLldpStatusNeighborsInformationSystemCapabilities,
tnLldpStatusNeighborsInformationSystemCapabilitiesEnable }
STATUS current
DESCRIPTION
"A collection of objects suitable for bulk operations."
::= { tnLldpMibGroups 11 }
tnLldpStatusNeighborsMgmtInformationInfoGroup OBJECT-GROUP
OBJECTS {
tnLldpStatusNeighborsMgmtInformationSystemMgmAddressSubtype,
tnLldpStatusNeighborsMgmtInformationSystemMgmtAddress,
tnLldpStatusNeighborsMgmtInformationSystemMgmtInterfaceSubtype,
tnLldpStatusNeighborsMgmtInformationSystemMgmtInterface,
tnLldpStatusNeighborsMgmtInformationSystemMgmtOid }
STATUS current
DESCRIPTION
"A collection of objects suitable for bulk operations."
::= { tnLldpMibGroups 12 }
tnLldpStatusMedRemoteDeviceInfoInfoGroup OBJECT-GROUP
OBJECTS { tnLldpStatusMedRemoteDeviceInfoCapabilities,
tnLldpStatusMedRemoteDeviceInfoCapabilitiesEnabled,
tnLldpStatusMedRemoteDeviceInfoLatitude,
tnLldpStatusMedRemoteDeviceInfoLongitude,
tnLldpStatusMedRemoteDeviceInfoAltitudeType,
tnLldpStatusMedRemoteDeviceInfoAltitude,
tnLldpStatusMedRemoteDeviceInfoDatum,
tnLldpStatusMedRemoteDeviceInfoElinaddr,
tnLldpStatusMedRemoteDeviceInfoDeviceType,
tnLldpStatusMedRemoteDeviceInfoHwRev,
tnLldpStatusMedRemoteDeviceInfoFwRev,
tnLldpStatusMedRemoteDeviceInfoSwRev,
tnLldpStatusMedRemoteDeviceInfoSerialNo,
tnLldpStatusMedRemoteDeviceInfoManufacturerName,
tnLldpStatusMedRemoteDeviceInfoModelName,
tnLldpStatusMedRemoteDeviceInfoAssetId,
tnLldpStatusMedRemoteDeviceInfoEeeRxTwSys,
tnLldpStatusMedRemoteDeviceInfoEeeTxTwSys,
tnLldpStatusMedRemoteDeviceInfoEeeFbTwSys,
tnLldpStatusMedRemoteDeviceInfoEeeTxTwSysEcho,
tnLldpStatusMedRemoteDeviceInfoEeeRxTwSysEcho }
STATUS current
DESCRIPTION
"A collection of objects suitable for bulk operations."
::= { tnLldpMibGroups 13 }
tnLldpStatusMedRemoteDeviceLocInfoInfoGroup OBJECT-GROUP
OBJECTS { tnLldpStatusMedRemoteDeviceLocInfoState,
tnLldpStatusMedRemoteDeviceLocInfoCounty,
tnLldpStatusMedRemoteDeviceLocInfoCity,
tnLldpStatusMedRemoteDeviceLocInfoDistrict,
tnLldpStatusMedRemoteDeviceLocInfoBlock,
tnLldpStatusMedRemoteDeviceLocInfoStreet,
tnLldpStatusMedRemoteDeviceLocInfoLeadingStreetDirection,
tnLldpStatusMedRemoteDeviceLocInfoTrailingStreetSuffix,
tnLldpStatusMedRemoteDeviceLocInfoStreetSuffix,
tnLldpStatusMedRemoteDeviceLocInfoHouseNo,
tnLldpStatusMedRemoteDeviceLocInfoHouseNoSuffix,
tnLldpStatusMedRemoteDeviceLocInfoLandmark,
tnLldpStatusMedRemoteDeviceLocInfoAdditionalInfo,
tnLldpStatusMedRemoteDeviceLocInfoName,
tnLldpStatusMedRemoteDeviceLocInfoZipCode,
tnLldpStatusMedRemoteDeviceLocInfoBuilding,
tnLldpStatusMedRemoteDeviceLocInfoApartment,
tnLldpStatusMedRemoteDeviceLocInfoFloor,
tnLldpStatusMedRemoteDeviceLocInfoRoomNumber,
tnLldpStatusMedRemoteDeviceLocInfoPlaceType,
tnLldpStatusMedRemoteDeviceLocInfoPostalCommunityName,
tnLldpStatusMedRemoteDeviceLocInfoPoBox,
tnLldpStatusMedRemoteDeviceLocInfoAdditionalCode,
tnLldpStatusMedRemoteDeviceLocInfoCountryCode }
STATUS current
DESCRIPTION
"A collection of objects suitable for bulk operations."
::= { tnLldpMibGroups 14 }
tnLldpStatusMedRemoteDeviceNetworkPolicyInfoInfoGroup OBJECT-GROUP
OBJECTS {
tnLldpStatusMedRemoteDeviceNetworkPolicyInfoApplicationType,
tnLldpStatusMedRemoteDeviceNetworkPolicyInfoUnknownPolicy,
tnLldpStatusMedRemoteDeviceNetworkPolicyInfoTagged,
tnLldpStatusMedRemoteDeviceNetworkPolicyInfoVlanId,
tnLldpStatusMedRemoteDeviceNetworkPolicyInfoL2Priority,
tnLldpStatusMedRemoteDeviceNetworkPolicyInfoDscp }
STATUS current
DESCRIPTION
"A collection of objects suitable for bulk operations."
::= { tnLldpMibGroups 15 }
tnLldpControlStatisticsClearTableInfoGroup OBJECT-GROUP
OBJECTS { tnLldpControlStatisticsClearStatisticsClear }
STATUS current
DESCRIPTION
"A collection of objects suitable for bulk operations."
::= { tnLldpMibGroups 16 }
tnLldpControlStatisticsClearGlobalInfoGroup OBJECT-GROUP
OBJECTS { tnLldpControlStatisticsClearGlobalClear }
STATUS current
DESCRIPTION
"A collection of objects suitable for bulk operations."
::= { tnLldpMibGroups 17 }
tnLldpMibCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for the implementation."
MODULE -- this module
MANDATORY-GROUPS { tnLldpConfigGlobalInfoGroup,
tnLldpConfigInfoGroup, tnLldpConfigMedInfoGroup,
tnLldpConfigMedPolicyInfoGroup,
tnLldpConfigMedPolicyListInfoGroup,
tnLldpConfigMedGlobalInfoGroup,
tnLldpConfigMedLocationInformationInfoGroup,
tnLldpConfigMedPolicyRowEditorInfoGroup,
tnLldpStatusStatisticsGlobalCountersInfoGroup,
tnLldpStatusStatisticsTableInfoGroup,
tnLldpStatusNeighborsInformationInfoGroup,
tnLldpStatusNeighborsMgmtInformationInfoGroup,
tnLldpStatusMedRemoteDeviceInfoInfoGroup,
tnLldpStatusMedRemoteDeviceLocInfoInfoGroup,
tnLldpStatusMedRemoteDeviceNetworkPolicyInfoInfoGroup,
tnLldpControlStatisticsClearTableInfoGroup,
tnLldpControlStatisticsClearGlobalInfoGroup }
::= { tnLldpMibCompliances 1 }
END
Reference in New Issue Copy Permalink