mibs/MIBS/transition/TN-MAC-MIB

267 lines
9.4 KiB
Plaintext
Raw Permalink Normal View History

2023-12-05 12:25:34 +01:00
-- *****************************************************************
-- TN-MAC-MIB.my : TN MAC TABLE MIB
--
-- Copyright (c) 2013 by Transition Networks, Inc.
-- All rights reserved.
--
-- *************************************************************************************************
TN-MAC-MIB DEFINITIONS ::= BEGIN
IMPORTS
OBJECT-TYPE, Unsigned32, Integer32
FROM SNMPv2-SMI
RowStatus, TruthValue, MacAddress
FROM SNMPv2-TC -- [RFC2579]
PortList, VlanId
FROM Q-BRIDGE-MIB
ifIndex
FROM IF-MIB
tnProducts
FROM TRANSITION-SMI;
tnMacMib MODULE-IDENTITY
LAST-UPDATED "201306180000Z"
ORGANIZATION "Transition Networks, Inc."
CONTACT-INFO
"Transition Networks
Technical Support
10900 Red Circle Drive
Minnetonka, MN 55343 USA
Tel: +1-800-526-9267
E-mail: techsupport@transition.com
"
DESCRIPTION
"The mib module for managing configuration
of MAC.
"
::= { tnProducts 142 }
--
-- main body
--
tnMacMibNotifications OBJECT IDENTIFIER ::= { tnMacMib 0 }
tnMacMibObjects OBJECT IDENTIFIER ::= { tnMacMib 1 }
tnMacMibConformance OBJECT IDENTIFIER ::= { tnMacMib 2 }
--Aging Configuration
tnMacAgeAutomaticConfig OBJECT IDENTIFIER ::= { tnMacMibObjects 1 }
tnMacAgeAutomaticAgingDisable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Disable the automatic aging of dynamic entries."
::= { tnMacAgeAutomaticConfig 1 }
tnMacAgeAutomaticAgingTime OBJECT-TYPE
SYNTAX Integer32(10..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure aging time by entering a value here in
seconds.
The allowed range is 10 to 1000000 seconds.
"
::= { tnMacAgeAutomaticConfig 2 }
-- MAC Table Learning
tnMacLearningTable OBJECT-TYPE
SYNTAX SEQUENCE OF TnMacLearningEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table displays MAC table learning."
::= { tnMacMibObjects 2 }
tnMacLearningEntry OBJECT-TYPE
SYNTAX TnMacLearningEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry represents MAC table learning in each port."
INDEX { ifIndex }
::= { tnMacLearningTable 1 }
TnMacLearningEntry ::= SEQUENCE {
tnMacTablePortLearning INTEGER
}
tnMacTablePortLearning OBJECT-TYPE
SYNTAX INTEGER {
auto(1),
disable(2),
secure(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If the learning mode for a given port is greyed
out, another module is in control of the mode, so
that it cannot be changed by the user. An example
of such a module is the MAC-Based Authentication
under 802.1X.
Each port can do learning based upon the following
settings:
Auto
Learning is done automatically as soon as a frame
with unknown SMAC is received.
Disable
No learning is done.
Secure
Only static MAC entries are learned, all other frames
are dropped.
Note: Make sure that the link used for managing the
switch is added to the Static Mac Table before changing
to secure learning mode, otherwise the management link
is lost and can only be restored by using another
non-secure port or by connecting to the switch via the
serial interface.
"
::= { tnMacLearningEntry 1 }
-- Static MAC Table Configuration
tnMacStaticConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF TnMacStaticConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The static entries in the MAC table are shown in this
table. The static MAC table can contain 64 entries."
::= { tnMacMibObjects 3 }
tnMacStaticConfigEntry OBJECT-TYPE
SYNTAX TnMacStaticConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The static entries in the MAC table are shown in this
table."
INDEX { tnStaticMacVlanId, tnStaticMacAddress }
::= { tnMacStaticConfigTable 1 }
TnMacStaticConfigEntry ::= SEQUENCE {
tnStaticMacVlanId VlanId,
tnStaticMacAddress MacAddress,
tnStaticMacPortMembers PortList,
tnStaticMacStatus RowStatus
}
tnStaticMacVlanId OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The VLAN ID of the entry."
::= { tnMacStaticConfigEntry 1 }
tnStaticMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The MAC address of the entry."
::= { tnMacStaticConfigEntry 2 }
tnStaticMacPortMembers OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Checkmarks indicate which ports are
members of the entry. Check or uncheck
as needed to modify the entry."
::= { tnMacStaticConfigEntry 3 }
tnStaticMacStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of the row.
The writable columns in a row can not be changed if the row
is active. All columns must have a valid value before a row
can be activated.
"
::= { tnMacStaticConfigEntry 4 }
-- MAC Address Table
tnMacAddressTable OBJECT-TYPE
SYNTAX SEQUENCE OF TnMacAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Navigating the MAC Table."
::= { tnMacMibObjects 4 }
tnMacAddressEntry OBJECT-TYPE
SYNTAX TnMacAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entriy represents a MAC address."
INDEX { tnMacType, tnMacVlan, tnMacAddress }
::= { tnMacAddressTable 1 }
TnMacAddressEntry ::= SEQUENCE {
tnMacType INTEGER,
tnMacVlan VlanId,
tnMacAddress MacAddress,
tnMacPortMembers PortList
}
tnMacType OBJECT-TYPE
SYNTAX INTEGER {
static(1),
dynamic(2)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates whether the entry is a static or a
dynamic entry.
"
::= { tnMacAddressEntry 1 }
tnMacVlan OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The VLAN ID of the entry.
"
::= { tnMacAddressEntry 2 }
tnMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The MAC address of the entry.
"
::= { tnMacAddressEntry 3 }
tnMacPortMembers OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ports that are members of the entry.
The value of this object in high 8 bits describe the status
from the first port to last port. In low 8 bits, the valus of
first bit is the status of port mgmt, while the second is the
status of port cpu, the default value of other bits are zero.
"
::= { tnMacAddressEntry 4 }
tnMacDynamicClear OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Flush all dynamic entries if the value is true.
"
::= { tnMacMibObjects 5 }
END