mibs/MIBS/transition/TN-SECURITY-AAA-MIB

352 lines
13 KiB
Plaintext
Raw Permalink Normal View History

2023-12-05 12:25:34 +01:00
-- *****************************************************************
-- Transition Networks Security AAA MIB
--
-- Copyright (C) 2012 Transition Networks, Inc. All Rights Reserved.
-- *****************************************************************
TN-SECURITY-AAA-MIB DEFINITIONS ::= BEGIN
IMPORTS
DisplayString, TruthValue
FROM SNMPv2-TC
InetAddressType, InetAddress
FROM INET-ADDRESS-MIB
Counter32, Unsigned32
FROM SNMPv2-SMI
tnDevMgmt
FROM TN-MGMT-MIB;
TnAAAProtocol ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Protocol used with this server.
tacacsplus(1) - TACACS+
radius(2) - RADIUS
"
REFERENCE "RFC 2138 Remote Authentication Dial In User Service
RFC 2139 RADIUS Accounting
The TACACS+ Protocol Version 1.78, Internet Draft"
SYNTAX INTEGER {
tacacsplus (1),
radius (2)
}
TnAAAType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Type used with this server.
authentication (1),
authorization (2),
accounting (3)
"
REFERENCE "RFC 2138 Remote Authentication Dial In User Service
RFC 2139 RADIUS Accounting
The TACACS+ Protocol Version 1.78, Internet Draft"
SYNTAX INTEGER {
authentication (1),
authorization (2),
accounting (3)
}
tnSecurityAAAMIB OBJECT IDENTIFIER ::= { tnDevMgmt 20 }
--
-- Mib variables
--
tnAAAServerTimeout OBJECT-TYPE
SYNTAX INTEGER (3..3600)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Common Configuration Server Timeout (seconds)."
DEFVAL { 15 }
::= { tnSecurityAAAMIB 1 }
tnAAAServerDeadTime OBJECT-TYPE
SYNTAX INTEGER (0..3600)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Common Configuration Server Dead Time (seconds)."
DEFVAL { 300 }
::= { tnSecurityAAAMIB 2 }
--
-- tnAAAServerTable
--
tnAAAServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF TnAAAServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "AAA Server Table"
::= { tnSecurityAAAMIB 3 }
tnAAAServerEntry OBJECT-TYPE
SYNTAX TnAAAServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Each entry represents a Server on a device."
INDEX { tnAAAProtocol, tnAAAType, tnAAAServerIndex }
::= { tnAAAServerTable 1 }
TnAAAServerEntry ::= SEQUENCE {
tnAAAProtocol TnAAAProtocol,
tnAAAType TnAAAType,
tnAAAServerIndex Unsigned32,
tnAAAServerEnable TruthValue,
tnAAAServerAddrType InetAddressType,
tnAAAServerAddr InetAddress,
tnAAAServerPort INTEGER,
tnAAAServerSecret DisplayString
}
tnAAAProtocol OBJECT-TYPE
SYNTAX TnAAAProtocol
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The variable denotes the protocol used by the
managed device with the AAA server corresponding to
this entry in the table."
::= { tnAAAServerEntry 1 }
tnAAAType OBJECT-TYPE
SYNTAX TnAAAType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "AAA commonly stands for authentication, authorization and accounting.
It refers to a security architecture for distributed systems,
which enables control over which users are allowed access to which services,
and how much of the resources they have used."
::= { tnAAAServerEntry 2 }
tnAAAServerIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A management station wishing to initiate a new AAA server
configuration should use a random value for this object
when creating an instance of tnAAAServerEntry."
::= { tnAAAServerEntry 3 }
tnAAAServerEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "To enable or disable a server."
DEFVAL { false }
::= { tnAAAServerEntry 4 }
tnAAAServerAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The IP address type of the server.
For a detailed description of this type,
please refer to INET-ADDRESS-MIB.
"
::= { tnAAAServerEntry 5 }
tnAAAServerAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The IP address of the server.
For a detailed description of this type,
please refer to INET-ADDRESS-MIB.
"
::= { tnAAAServerEntry 6 }
tnAAAServerPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The port to use on theServer."
::= { tnAAAServerEntry 7 }
tnAAAServerSecret OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..29))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The secret - up to 29 characters long - shared
between the Server and the switch.
"
::= { tnAAAServerEntry 8 }
--
-- Server Statistics
--
tnStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF TnStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table providing statistics for each server."
::= { tnSecurityAAAMIB 4 }
tnStatisticsEntry OBJECT-TYPE
SYNTAX TnStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Statistical information about a particular server.
Objects in this table are read-only and appear
automatically whenever a row in the tnStatisticsTable
is made active.
"
AUGMENTS { tnAAAServerEntry }
::= { tnStatisticsTable 1 }
TnStatisticsEntry::=
SEQUENCE {
tnAcceptPkts Counter32,
tnRejectPkts Counter32,
tnChallengesPkts Counter32,
tnMalResponsePkts Counter32,
tnBadAuthPkts Counter32,
tnUnknownTypePkts Counter32,
tnDroppedPkts Counter32,
tnRequestPkts Counter32,
tnRetransPkts Counter32,
tnPendRequestPkts Counter32,
tnTimeouts Counter32,
tnState INTEGER,
tnRoundTripTime Counter32
}
--
-- Authentication statistics
--
tnAcceptPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of Accept packets (valid or invalid) received from the server."
::= { tnStatisticsEntry 1 }
tnRejectPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of Reject packets (valid or invalid) received from the server."
::= { tnStatisticsEntry 2 }
tnChallengesPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of Challenge packets (valid or invalid) received from the server."
::= { tnStatisticsEntry 3 }
tnMalResponsePkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of malformed packets received from the server.
Malformed packets include packets with an invalid length.
Bad authenticators or Message Authenticator attributes or unknown types
are not included as malformed access responses.
"
::= { tnStatisticsEntry 4 }
tnBadAuthPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of packets containing invalid authenticators
or Message Authenticator attributes received from the server.
"
::= { tnStatisticsEntry 5 }
tnUnknownTypePkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of packets of unknown types
that were received from the server on the port.
"
::= { tnStatisticsEntry 6 }
tnDroppedPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of packets that were received from
the server on the port and dropped for some other reason.
"
::= { tnStatisticsEntry 7 }
tnRequestPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of packets sent to the server.
This does not include retransmissions.
"
::= { tnStatisticsEntry 8 }
tnRetransPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of packets retransmitted to the server."
::= { tnStatisticsEntry 9 }
tnPendRequestPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of packets destined for the server
that have not yet timed out or received a response.
This variable is incremented when a Request is sent and decremented
due to receipt of a Response, timeout, or retransmission.
"
::= { tnStatisticsEntry 10 }
tnTimeouts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of timeouts to the server. After a timeout,
the client may retry to the same server, send to a different server,
or give up. A retry to the same server is counted as a retransmit as well as a timeout.
A send to a different server is counted as a Request as well as a timeout.
"
::= { tnStatisticsEntry 11 }
tnState OBJECT-TYPE
SYNTAX INTEGER {
disabled (1),
notready (2),
ready (3),
dead (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Shows the state of the server. It takes one of the following values:
Disabled - The selected server is disabled.
Not Ready - The server is enabled, but IP communication is not yet
up and running.
Ready - The server is enabled, IP communication is up and running,
and the module is ready to accept accounting or access attempts.
Dead - Accounting or access attempts were made to this server,
but it did not reply within the configured timeout.
The server has temporarily been disabled, but will get re-enabled when the
dead-time expires. The number of seconds left before this occurs is displayed
in parentheses. This state is only reachable when more than one server is enabled.
"
::= { tnStatisticsEntry 12 }
tnRoundTripTime OBJECT-TYPE
SYNTAX Counter32
UNITS "millisecond"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The time interval (measured in milliseconds) between the most recent Response
and the Request that matched it from the server.
The granularity of this measurement is 100 ms. A value of 0 ms indicates
that there hasn't been round-trip communication with the server yet.
"
::= { tnStatisticsEntry 13 }
END